http://oldwiki.streamboard.tv/api.php?action=feedcontributions&feedformat=atom&user=Felixka
Streamboard Wiki - Benutzerbeiträge [de-at]
2026-05-08T20:46:21Z
Benutzerbeiträge
MediaWiki 1.41.1
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.conf&diff=13572
OSCam/en/Config/oscam.conf
2021-09-16T11:53:32Z
<p>Felixka: /* ignore_peer */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
==oscam.conf==<br />
<br />
=== The [global] section ===<br />
<br />
The main configuration file for OSCam contains global parameters such as debugging, logging, monitor, protocols and anti-cascading. Sections in oscam.conf are nonrecurring. The [global] section is required. All other sections are optional.<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If a parameter is empty or is not listed in config-file, then apply the default values !<br />
<br />
==== nice ====<br />
{{Optional/en}}<br />
<br />
'''Systempriority'''<br />
<br />
OSCam requires almost no CPU-power. But if CPU-power is required, it should be available immediatly. Values between 20 and -20 are possible. 20 = low, -20 = very high. If this parameter is commented out (#), this function is not called. Important for example for dbox2[http://de.wikipedia.org/wiki/DBOX2], if the error messages "''relocation error:setpriority''". See [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Example:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
===== initial_debuglevel =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10705:06/11/15</span><br />
<br />
Set the debuglevel on startup.<br />
<br />
Example:<br />
initial_debuglevel = 8<br />
<br />
Default:<br />
initial_debuglevel = 0<br />
<br />
===== pidfile =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8176/01/24/2013</span><br />
<br />
pidfile = set pidfile, [blank] none (default)<br />
<br />
Change PID file name an path. If default = oscam.pid in /tmp<br />
<br />
Example:<br />
pidfile = /var/run/oscam.pid<br />
<br />
===== logfile =====<br />
{{optional/en}}<br />
<br />
Logging target<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
You can define a maximum of one filename (not more!) and additionally to log to stdout or syslog (you can also only log to stdout or syslog and omit the filename).<br />
<br />
Opportunities:<br />
<br />
logfile = /var/log/oscam.log # file or linux device (for example /dev/tty)<br />
logfile = syslog # log to syslogd <br />
logfile = stdout # showing the log on the console<br />
<br />
Example:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format logfile:<br />
CAID&ident/provider/length:checksum<br />
<br />
===== ecmfmt =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
define ECM log format, default:c&p/i/s/l:h <br />
<br />
possible variables: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and CCcam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , this ID will be replaced with the tier-description from oscam.tiers (if found)<br />
w = CW<br />
y = payload (short, 3 bytes)<br />
Y = payload (long, 6 bytes)<br />
<br />
<br />
use a value as prefix to hide variable with this value, control characters will be escaped by "\" <br />
<br />
example:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w HOP:j<br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn10048:11/30/2014</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs will be dropped, if CWs do not have an odd an even sample (default)<br />
1 = disabled<br />
<br />
===== loghistorysize =====<br />
{{optional/en}}<br />
<br />
loghistorysize = bytes<br />
<br />
size of log message history in web interface or monitor<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) #stage 2 is used only if '''preferlocalcards = 1''' was activated in [global] section. <br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
example<br />
<br />
P/2/2/2 or L/2/4/4<br />
<br />
===== maxlogsize =====<br />
{{required}}<br />
<br />
Here the maximum size of logfiles are set in KBytes. This is especially important for server with only a small amount of memory (dbox2). Therefore it is strongly recomended to determine carefully that size at such servers. Not infrequently a system "bursting" because the logfile uncontrolled large scale adopted!<br />
<br />
Example<br />
maxlogsize = 20 # Logfile reaches to 20 KBytes<br />
= 0 # Logfile '''unlimited'''<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile reaches to 10 KBytes (default)<br />
<br />
===== logduplicatelines =====<br />
{{optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8290/02/05/2013</span><br />
<br />
logduplicatelines = 0|1<br />
<br />
1 = disable detection of duplicate lines in log file<br />
0 = enable detection of duplicate lines in logfile = default<br />
<br />
===== disablelog =====<br />
{{optional/en}}<br />
<br />
switches logfile '''off'''<br />
1 = '''no log''' <br />
0 = '''log''' <br />
<br />
Example:<br />
disablelog = 1 # '''no''' log <br />
<br />
Default:<br />
disablelog = 0 # '''log'''<br />
<br />
===== cwlogdir =====<br />
{{Optional/en}}<br />
<br />
<br />
A path for cw logging can be configured here. The path is relative to the work directory and must exist. Otherwise no logs are created and no errors are reported. <br />
<br />
CWs (control words) are the answers of the card which decrypts a certain channel for some seconds before the next cw is transmitted. The CW log file can be used for delayed decoding of this channel. This is also called offline decoding. Watch this [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
Oscam creates a new *.cwl file for each channel and each day. The file name contains the date, service ID and service name, e.g. 110808_I000B_Sky_Cinema_+1.cwl with this contents:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
All cws are logged if at least one user watches the channel. Please choose a path with enough space, since per day and channel some 10KB of data are created. A script that moves/deletes the log files regularly is recommended.<br />
<br />
Example:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] no path for cw-log, logging disabled<br />
<br />
===== emmlogdir =====<br />
{{Optional/en}}<br />
<br />
Setting a path for emm-log. You can define with the "saveemm-*"-Parameters in oscam.server which EMMs should be logged.<br />
<br />
Example:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] the config folder will be used for emm logging<br />
<br />
===== usrfile =====<br />
{{Optional/en}}<br />
<br />
Set a name für userfile<br />
<br />
Format of the userfile: <br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Example:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
===== disableuserfile =====<br />
{{Optional/en}}<br />
<br />
Now it is crazy: Even if a logfile is switched on (see logfile), the userfile can be turned off!<br />
<br />
Example:<br />
disableuserfile = 1 # '''no''' userfile <br />
= 0 # '''userfile'''<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
===== usrfileflag =====<br />
{{Optional/en}}<br />
<br />
Setting the logging-modus<br />
0 = Only login and logout will be logged<br />
1 = Each zapping from client will be logged<br />
Default is 0<br />
<br />
Example:<br />
usrfileflag = 1 # All will be logged<br />
<br />
Default:<br />
usrfileflag = 0 # Only login und logout will be logged<br />
<br />
===== saveinithistory =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn7128:07/02/2012</span><br />
<br />
Save SC init history to /tmp/.oscam/reader<number>. Needed to show entitlements.<br />
<br />
Example:<br />
saveinithistory = 1 # save to /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # no save<br />
<br />
===== mailfile =====<br />
{{Optional/en}}<br />
<br />
mailfile = file<br />
<br />
define file saving NDS Videogard mail messages from provider. Default: [blank] none<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
delay in millisencons for asking cache exchange mode 1 readers, default: none<br />
<br />
===== disablemail =====<br />
{{Optional/en}}<br />
<br />
disablemail = 0|1<br />
<br />
disable saving NDS Videogard mail messages form provider. Default = 1 (disabled)<br />
<br />
===== sysloghost =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set remote syslog server will be activated. Messages will be sent to this IPv4 address. If not set remote syslog server not work.<br />
<br />
Example:<br />
sysloghost = 192.168.1.167<br />
<br />
===== syslogport =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set ''sysloghost'' remote syslog server will be activated. Messages will be sent to this port. If not set port 514 is used as default. <br />
<br />
Example:<br />
syslogport = 515<br />
<br />
Default:<br />
syslogport = 514<br />
<br />
==== Reader ====<br />
<br />
===== enableled =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
===== serialreadertimeout =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8541:03/13/2013</span><br />
<br />
'''Only using Serialreader!'''<br />
<br />
timeout for serial reader in milli-seconds<br />
<br />
Example:<br />
serialreadertimeout = 1200 # Timeout after 1200 milli-seconds<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout after 1500 milli-seconds<br />
<br />
===== waitforcards =====<br />
{{Optional/en}}<br />
<br />
wait for local SCs on startup before opening network ports<br />
<br />
Example:<br />
waitforcards = 0 # don't wait<br />
<br />
Default:<br />
waitforcards = 1 # wait<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional/en}}<br />
<br />
waitforcards_extra_delay = milli seconds<br />
<br />
additional delay in milli seconds after waiting for local SCs on startup before opening nework ports<br />
<br />
default = 500<br />
<br />
===== preferlocalcards =====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn9605:03/29/2014</span><br />
<br />
try decoding on local cards first<br />
<br />
Example:<br />
preferlocalcards = 0 # local cards are used like remote reader<br />
preferlocalcards = 1 # prefer CacheEx sources <br />
preferlocalcards = 2 # prefer local cards<br />
<br />
Default:<br />
preferlocalcards = 1 # prefer CacheEx sources<br />
<br />
===== readerrestartseconds =====<br />
{{Optional/en}}<br />
<br />
waiting time in seconds beetween restarts<br />
<br />
Example:<br />
readerrestartseconds = 10 # waiting time 10 seconds<br />
= 0 # '''no restarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # waiting time 5 seconds<br />
<br />
===== block_same_ip =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_ip = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same ip address, default = 1<br />
0 = no reject<br />
<br />
===== block_same_name =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_name = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same name, default = 1<br />
0 = no reject<br />
<br />
==== Cache ====<br />
<br />
===== cachedelay =====<br />
{{optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
===== max_cache_time =====<br />
<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
===== max_cache_count =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = count, default 1000<br />
<br />
maximum CWs in cache<br />
<br />
===== cacheexwaittime =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
maximum wait time for a cache entry in milli seconds, default:50 <br />
<br />
===== cacheexenablestats =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== Client ====<br />
<br />
===== clienttimeout =====<br />
{{Optional/en}}<br />
<br />
value in milli-seconds for client process to wait for key<br />
<br />
Examples:<br />
clienttimeout = 10000 # after 10 seconds timeout<br />
clienttimeout = 10 # timeout after 10 milli-seconds! (see Tip below)<br />
clienttimeout = 8 # timeout after 8000 milli-seconds (= 8 seconds), see Tip below<br />
Default:<br />
clienttimeout = 5000 # timeout after 5000 milli-seconds (=5 seconds)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Values < 10 (so 1 to 9) are multiplicated with 1000, so a "5" results in 5000 ms.<br />
<br />
===== clientmaxidle =====<br />
{{Optional/en}}<br />
<br />
value for client process being idle before disconnect in seconds<br />
<br />
Example:<br />
clientmaxidle = 200 # Disconnect after 200 seconds<br />
= 0 # idle disconnect disabled<br />
<br />
Default:<br />
clientmaxidle = 120 # Disconnect after 120 seconds<br />
<br />
===== suppresscmd08 =====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35[cs3.57x]-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
==== fallbacktimeout ====<br />
{{Depends/en}}<br />
<br />
At several readers (see Chapter [reader] in oscam.server) one reader can be defined to them, for example in case of failure of the other readers, the traffic falls back.<br />
Maximum waiting time of the [[Cardserver]]s in milliseconds for primary [[Reader]], before [[Fallback]]-Reader (if any!) are questioned.<br />
<br />
Example:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The value must be greater than the value in "serialreadertimeout", otherwise the default is used.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = milliseconds <br />
<br />
time falling back to CAID restricted fallback reader, default: 2500<br />
<br />
<br />
<br />
==== sleep ====<br />
{{Optional/en}}<br />
<br />
time waiting for inactive users in minues, can be overwritten per user in oscam.user<br />
<br />
Example:<br />
sleep = 5 # waiting time 5 minutes<br />
<br />
Default:<br />
sleep = # [blank] no waiting time<br />
<br />
==== serverip ====<br />
{{optional/en}}<br />
<br />
Bind service to specified IP-address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam listen to all IP's<br />
<br />
==== bindwait ====<br />
{{Optional/en}}<br />
<br />
value in seconds to wait for bind request to complete. If OSCam within this time can not bind, he finished with "Bind Request failed".<br />
<br />
Causes may include:<br />
* Double assignment of ports<br />
* "crashed" OSCam has not released the ports again<br />
* OSCam was started serveral times while<br />
<br />
Example:<br />
bindwait = 20 # waiting time 20 seconds<br />
<br />
Default:<br />
bindwait = 120 # waiting time 120 seconds<br />
<br />
==== netprio ====<br />
{{Optional/en}}<br />
<br />
network priority - This sets the value of SO_PRIORITY on network connections. Basically this leads to setting the TOS fields of the sent IP packages so that QoS can be better used.<br />
<br />
Beispiel:<br />
netprio = 1 # Priority 1<br />
<br />
Default:<br />
netprio = 0 # system given<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional/en}}<br />
<br />
set mode for DNS resolving: These are different libc calls to resolve dns names and some older systems have problems with the newer implementation ''getadressinfo'' (getadressinfo is also threadsafe whereas ''gethostbyname'' is not and thus it has some locks around) or have stripped them from their images (dbox2 was such a candidate I think) even though it is available at compile time. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Example:<br />
resolvegethostbyname = 1 # gethostbyname<br />
<br />
Default:<br />
resolvegethostbyname = 0 # adressinfo system given<br />
<br />
==== failbantime ====<br />
{{Optional/en}}<br />
<br />
time for IP based blocking for clients with an invalid login attempt in minutes<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP will be blocked for 5 minutes. New logins are denied.<br />
# no clientthread will be created.<br />
<br />
Default:<br />
failbantime = 0 # failban off (default)<br />
<br />
==== failbancount ====<br />
{{Optional/en}}<br />
<br />
Failbancount = Number of allowed failed attempts with incorrect data <br />
= 0 (default) IP is now blocked on the first try with incorrect data!<br />
<br />
If within '''failbantime''' more than in '''failbancount''' allowed trials to be registered, the IP for the remainder failbantime is locked. After a period of failbantime are again full failbancount available. Failbancount is thus a relaxation of rules!<br />
<br />
==== dropdups ====<br />
{{Optional/en}}<br />
<br />
mode for duplicate client connections<br />
<br />
0 = mark client as duplicate, but don't disconnect them (default)<br />
1 = drop duplicate connections instead of marking as duplicate<br />
<br />
==== unlockparental ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7289:08/27/2012</span><br />
<br />
'''Only Seca and Viaccess'''<br />
<br />
unlock parental mode option to disable pin code request for adult movie.<br />
In order to work properly, this option may required that you define the card PIN code in your card reader configuration.<br />
<br />
Example:<br />
unlockparental = 1 # parental lock mode disabled<br />
<br />
Default:<br />
unlockparental = 0 # parental lock mode enabled<br />
<br />
==== double_check ====<br />
{{Optional/en}}<br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other, lb_nbest_readers must be set to 2 or higher<br />
<br />
Example:<br />
double_check = 1 # on<br />
<br />
Default:<br />
double_check = 0 # off<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|first two digits of CAID1],[CAID2|first two digits of CAID2]... <br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other for defined CAID or first two bytes of CAID, lb_nbest_readers must be set to 2 or higher, default:none <br />
<br />
<br />
<br />
==== Loadbalancer ====<br />
<br />
===== lb_mode =====<br />
{{Optional/en}}<br />
<br />
'''loadbalance mode'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If load balancing is activated here, it may in oscam.server among services and ident are '''no entries'''!<br />
<br />
If there are 2 or more of the same SC, the load can be distributed evenly on the cards. For more see [[OSCam/en/Loadbalancing|Loadbalancing]]<br />
<br />
Example:<br />
lb_mode = 0 loadbalance disabled, ECMs go to all readers<br />
lb_mode = 1 fastest reader first, after 5 ECMs the reader with the fastest response time will be selected<br />
lb_mode = 2 oldest reader first, reader with the longest no answer<br />
lb_mode = 3 lowest usage level, the usage level will be calculated by the sum of 5 ECMS response times, the higher a reader is busy, the higher is usage level<br />
lb_mode = 10 LB is switched off, but statistics are build<br />
<br />
<br />
Default:<br />
lb_mode = 0 # disabled<br />
<br />
===== lb_save =====<br />
{{Optional/en}}<br />
<br />
Save autoloadbalance statistics (counts). To save CPU power a minimum counts of 100 is recommended.<br />
<br />
Example:<br />
lb_save = 100 # counts of ECM's after statistics are saved<br />
<br />
Default:<br />
lb_save = 0 # no svae<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional/en}}<br />
<br />
set count of best readers for loadbalancing.<br />
<br />
Example:<br />
lb_nbest_readers = 2 # requests always go to two reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # requests go to one reader<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional/en}}<br />
<br />
set count of fallback readers for loadbalancing<br />
<br />
Example:<br />
lb_nfb_readers = 2 # two fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1 # one fallbackreader<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mode:<br />
= 0 # standard late reopening of blocker readers (default)<br />
= 1 # fast reopening of blocker readers<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5893:08/19/2011</span><br />
<br />
Set count of best readers per CAIDs for loadbalancing, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
<br />
lb_nbest_percaid = # number<br />
= [blank] # none (default)<br />
<br />
example: <br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wiil be blocked until statistics has been cleaned<br />
1 = default<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = force reopening immidiatly all failing readers if no matching was found<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional/en}}<br />
<br />
minimal ECM count to evaluate loadbalancing values<br />
<br />
Example:<br />
lb_min_ecmcount = 2 # 2 counts<br />
<br />
Default:<br />
lb_min_ecmcount = 5 # 5 counts<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional/en}}<br />
<br />
Maximum ECM count before resetting loadbalancing values.<br />
<br />
Example:<br />
lb_max_ecmcount = 200 # 200 counts<br />
<br />
Default:<br />
lb_max_ecmcount = 500 # 500 counts<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional/en}}<br />
<br />
time in seconds between retrying failed readers/CAIDs/providers/services<br />
<br />
Example:<br />
lb_reopen_seconds = 500 # retry after 500 seconds<br />
<br />
Default:<br />
lb_reopen_seconds = 900 # retry after 900 seconds<br />
<br />
===== lb_retrylimit =====<br />
{{Optional/en}}<br />
<br />
Retry next readers '''only''' if response time is higher then lb_retrylimit in '''milli seconds'''.<br />
<br />
Example:<br />
lb_retrylimit = 500 # retry next reader only, if response time is higher than 500 ms<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
===== lb_savepath ===== <br />
{{Optional/en}}<br />
<br />
Filenanme for saving loadbalancing statistics<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional/en}}<br />
<br />
hours after the loadbalancing statistics will be deleted<br />
<br />
default = 336<br />
<br />
===== lb_use_locking =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6166:12/28/2011</span><br />
<br />
disable parallel and identical ECM requests<br />
<br />
<br />
1 = on<br />
0 = off # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* You should choose this option only if:<br />
** slow system<br />
** high load<br />
** the same ECM requests come not from the cache, but will continue to the confirmed reader.<br />
<br />
* Adventages, if activated:<br />
** By synchronizing, an ECM request made by one. The identification of cache or request and assignment of the reader by loadbalancer is always successful.<br />
<br />
* Disadventages, if activated:<br />
** The synchronisation prevents multithreading and the probability of higher response times.<br />
<br />
* Adventages, if NOT activated:<br />
** Faster transit times for ECM requests<br />
<br />
* Disadventages, if NOT activated:<br />
** May have dual (n-fold) possible requests to the readers.<br />
<br/><br />
<br />
===== lb_retrylimits =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn:5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,Caid2:time2]...<br />
<br />
loadbalancing retry limit time per CAID in milliseconds, wilcard CAIDs with 2-digit Caids possible<br />
<br />
default = none<br />
<br />
example: <br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
ignore provider information CAIDs to reduce statistic date, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
example: <br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
default = none<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # enable automatic timeout based on load balancing statistics<br />
= 0 # default<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = percent<br />
<br />
percent added to average time as timeout time<br />
default = 30<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = milli seconds<br />
<br />
minimal time added to average time as timeout time<br />
default = 300<br />
<br />
===== lb_max_readers =====<br />
{{Optional/en}}<br />
<br />
lb_max_readers = limit (number)<br />
<br />
restrict the reader count to limit during learning<br />
<br />
0 = unlimited (default)<br />
x = restrict loadbalancer readers to limit x (number)<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional/en}}<br />
<br />
lb_auto_betatunnel = 0|1<br />
<br />
enable automatic Betacrypt tunneling for CAIDs 1801, 1833, 1834 and 1835 in loadbalancing mode<br />
lb_auto_betatunnel = 0 # disabled<br />
= 1 # enabled (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Betacrypt definition in oscam.user with betatunnel will be prefered [[streamboard:wiki/OSCam/en/Config/oscam.user#betatunnel|User-Betatunnel]]!<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
set mode for automatic Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only) <br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = number<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = always Betacrypt<br />
105 = represents the middle<br />
200 = always Nagravision<br />
<br />
=== Monitor ===<br />
'''Only if monitor is used!'''<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
==== port ====<br />
{{Optional/en}}<br />
UDP port for monitor<br />
port = 0 # monitor disabled<br />
= # port number<br />
<br />
Beispiel:<br />
port = 24480 # monitor on, port = 24480<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
serverip = # IP adress<br />
= # [blank] all IP's (default)<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured monitor connection<br />
[,IP address|IP address range]...<br />
<br />
Possible<br />
* one or more IP adresses<br />
* one or more IP adress ranges<br />
* mixture of IP adresses and IP adress ranges<br />
<br />
Example<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 and IP range 192.168.0.0 to 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] no secured monitor connection<br />
<br />
==== aulow ====<br />
{{Optional/en}}<br />
<br />
time no EMM occurs so that client is set to low in minutes<br />
<br />
Example<br />
aulow = 30 # After 30 minutes whithout EMM client will be switched from "active" to "on" (default).<br />
<br />
==== monlevel ====<br />
{{Optional/en}}<br />
<br />
monitor-level<br />
0 = no access to monitor (default)<br />
1 = only server and own procs<br />
2 = all procs, but viewing only<br />
3 = all procs, reload of oscam.user possible<br />
4 = complete access<br />
<br />
Example<br />
monlevel = 4 # complete access<br />
<br />
monlevel can be overwritten per user in oscam.user!<br />
<br />
==== appendchaninfo ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8546:03/13/2013<br />
</span><br />
<br />
Append channel name on log messages. Very useful when using [webif]!<br />
appendchaninfo = 1 # append chanel name<br />
= 0 # no append chanel name (default)<br />
<br />
=== lcd ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
==== lcd_outputpath ====<br />
{{Optional/en}}<br />
<br />
Path for LCD output<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
==== lcd_hideidle ====<br />
{{Optional/en}}<br />
<br />
hide reader in LCD output if reader idle > 20 seconds, default:0 <br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional/en}}<br />
<br />
LCD refresh interval (minimum 5), default:10<br />
<br />
=== WebIf ===<br />
'''Only if WebIf is used!'''<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
==== File format to send EMMs via the webinterface ====<br />
(by Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention'''<br />
<br />
* File has to be in TXT format.<br />
* The EMM-file should contain each PRE-CAM EMM in a new line.<br />
* EMMs should be in HEX representation.<br />
** Example: AABBCCDD...<br />
*Spaces and tabs between the bytes are allowed:<br />
**AA BB CC DD...<br />
*The HEX representation of each EMM's byte can be represented by upper or lower case - even mixed is allowed:<br />
**AA aa Aa aA...<br />
*Other chars and comments are not allowed.<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
<br />
default is 8888 if no httpport is set<br />
port for web interface,<br />
0 = disabled, praefix + = enable SSL<br />
<br />
Example<br />
httpport = 83 # Webinterface listening on '''http-port 83'''<br />
= +83 # Webinterface listening on '''https-port 83''' (SSL)<br />
0 # Webinterface disabled<br />
<br />
==== httpcert ====<br />
{{Optional/en}}<br />
<br />
file for http SSL certificate<br />
httpcert = oscam.cert # (look there)<br />
= # [blank] file oscam.pem (embedded) is used<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
example<br />
httpforcesslv3 = 0 none (default)<br />
= 1 force using SSLV3<br />
<br />
==== httpuser ====<br />
{{Optional/en}}<br />
<br />
Username for password protection. [blank] is default, of which is strongly discouraged! <br />
httpuser = # xyxyxy (all characters and figures are allowed)<br />
<br />
==== httppwd ====<br />
{{Optional/en}}<br />
<br />
Password for password protection. It is the same as for httpuser.<br />
httppwd = # 123456<br />
<br />
'''The ''user'' and ''pwd'' parameters are queried when connecting to the webinterface in a messagebox. If they are missing ore corrupted a message ''Forbidden'' appears and the connection is aborted!'''<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6625:05/15/2012</span><br />
<br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Do not add the content of the embedded CSS before the content of the custom CSS (default)<br />
1 # embedded CSS will be added before external custom CSS (specified by the [[#httpcss|httpcss]] parameter)<br />
<br />
This parameter can be used to override the embedded CSS with custom styles. To see the current CSS styles use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
==== httpcss ====<br />
{{Optional/en}}<br />
<br />
path for external CSS file<br />
<br />
For webinterface different styles are available. Put custom CSS files (ending with .css extension) in the oscam config directory to managed your custom styles with WebIf.<br />
<br />
Example<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] embedded style is used (default)<br />
<br />
To see the current CSS style, use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
Styles you find here: [[Streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
==== httptpl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7083:06/25/2012</span><br />
<br />
path for external templates and picons<br />
httptpl =<br />
= # [blank] No external templates<br />
<br />
path for external templates and picons, multiple simultaneously templates and picons are possible by creat‐ <br />
ing sub folders (maximum length of 32 alphanumeric characters), sub folders naming is corresponding to sub <br />
folder in URL, default:none <br />
<br />
example <br />
httptpl = /this/is/my/path <br />
<br />
folder with multiple templates: <br />
/this/is/my/path/template<br />
/this/is/my/path/template2 <br />
<br />
valid URLs: <br />
http://host:port/template1 <br />
http://host:port/template2<br />
<br/><br />
<br/><br />
==== httpoverwritebakfile ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = overwrite backup configurations files (*.bak)<br />
0 = default<br />
<br/><br />
<br/><br />
<br />
<br />
<br />
==== httplocale ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
set the "locale environment"<br />
<br />
default = blank [none]<br />
<br />
look here::<br />
<br />
http://en.wikipedia.org/wiki/locale<br />
<br />
==== httpjscript ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
path for oscam.js javascript, def: none<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional/en}}<br />
<br />
status refresh in seconds<br />
<br />
httprefresh = 7 # status will be refreshed after 7 seconds<br />
= # [blank] no refreshing<br />
<br />
==== httppollrefresh ====<br />
{{Optional/en}}<br />
<br />
refreshtime for polling in seconds<br />
<br />
httppollrefresh = 60 # polling will be refreshed after 60 seconds<br />
= # [blank|0] no refreshing poll<br />
<br />
==== httpshowpicons ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # show picons in userlist<br />
0 # default<br />
<br />
If this parameter is enables, then a new column is added to the USERS tab which display the picons of the last watched channels by active users. The folder where the picons must be configured in the httppiconpath.<br />
<br />
Possible format are:<br />
IC_caid_srvid.tpl<br />
IC_caid_provid_srvid.tpl<br />
IC_servicename.tpl<br />
<br />
added support for picons by channel name<br /><br />
syntax is:<br /><br />
take service-name from oscam.srvid,<br /><br />
replace all upper-case letters with lower case,<br /><br />
replace * with star,<br /><br />
replace & with and,<br /><br />
replace + with plus,<br /><br />
remove everything but a-z and 0-9,<br /><br />
if the result is name, the picon file will be IC_name.tpl<br /><br />
for example:<br /><br />
service-name "BBC-ONE +HD"<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
if service-name ends with hd, and picon is not found, fallback to name without hd, example:<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
-> not found, search for:<br /><br />
picon file: "IC_bbconeplus.tpl"<br /><br />
<br />
==== httphideidleclients ====<br />
{{Optional/en}}<br />
<br />
Enables hiding clients after idle time set with parameter ''' hideclient_to''' in section [monitor].<br />
httphideidleclients = 1 # hide<br />
= 0 # hide not (default)<br />
<br />
==== hideclient_to ====<br />
{{Optional/en}}<br />
<br />
Time to hide clients in the monitor if not sending requests. See also parameter '''httphideidleclienst''' in section [webif].<br />
hideclient_to = 1 # hide clients<br />
= 0 # no hide<br />
<br />
==== httphidetype ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
type = letter which defines types to hide in web interface status page (see Typ column), <br />
default: none. s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
==== httpscript ====<br />
{{Optional/en}}<br />
<br />
Path to an executable script which you wish to start from web interface<br />
httpscript = # path<br />
= # [blank] no path<br />
<br />
You can run script file from script.html (SCRIPTS item in main menu)<br /><br />
If the script file contains the "echo" will be it displayed in a Web interface.<br />
<br />
If the file can not run displays<br />
[Error]: Script "name_of_script.sh" not executable!<br />
<br />
If does not exist script displays<br />
[Error]: Script "name_of_script.sh" not found!<br />
(Works If you delete the script and refresh page)<br />
<br />
==== httpallowed ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8842:08/17/2013</span><br />
<br />
http web interface connections allowed. [blank] is allowed (default), but that makes no sense! If the webinterface to be used, then there must be a way to connect with him. Therefore we declare this parameter as '''mandatory'''!<br />
<br />
With '''::1''' OSCam decides to resolve 'localhost' to '''IPv6'''!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
<br />
<br />
Example<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host and range 192.168.0 are allowed<br />
resolving to IPv6<br />
<br />
'''default values'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1<br />
<br />
==== httpdyndns ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6558:03/21/12</span><br />
<br />
http web interface connections allowed<br />
<br />
httpdyndns = hostname [,hostnahme][,hostname]<br />
<br />
Example<br />
httpdyndns = host1.example.com,host2.example.com<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional/en}}<br />
<br />
write config:<br />
0 = all not empty parameters, all not default parameters, all parameters not containing the same value as the same parameter in global configuration (default)<br />
1 = all parameters<br />
<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional/en}}<br />
<br />
read only modus for web interface<br />
<br />
httpreadonly = 1 # only read<br />
= 0 # all is possible (default)<br />
<br />
<br />
==== httppiconpath ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9463/01/28/2014</span><br />
<br />
httppiconpath = path<br />
<br />
path to picons, default [blank] none<br />
<br />
====httphelplang====<br />
{{required}}<br />
<br />
set right language for wiki entry point<br />
de|en|fr <available wiki languages><br />
<br />
==== httposcamlabel ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
set individual label in web interface header, default: OSCam<br />
<br />
==== http_status_log ====<br />
{{Optional/en}}<br />
<br />
http_status_log = 0|1<br />
1 = display log in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowreaderinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowreaderinfo = 0|1<br />
1 = display readers informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowecminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowecminfo = 0|1<br />
1 = display readers and users ECM informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowuserinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowuserinfo = 0|1<br />
1 = display users informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowcacheexinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowcacheexinfo = 0|1<br />
1 = display CacheEX informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowmeminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowmeminfo = 0|1<br />
1 = display memory usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowloadinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowloadinfo = 0|1<br />
1 = display load average and CPU usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
<br/><br />
<br/><br />
<br />
=== [cache] ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW since svn 8358:02/16/2013</span><br />
<br />
{{OSCamConfCacheParameter}}<br />
<br />
'''cw_cache - info'''<br /><br />
cache of CWs which are saved to detect/drop old CWs arriving via CacheEx<br />
<br />
to enable this feature, you have to define cw_cache_size or cw_cache_memory to set the cache-size<br />
and cw_cache_settings to define for what CWs which action is taken. <br />
<br />
if cw_cache_size or cw_cache_memory is defined, the default is, that incoming known CWs older then 15 seconds are dropped, cause they are useless.<br />
<br />
<br />
'''ecm_cache - info'''<br /><br />
<br />
cache of ECMs which are saved to detect/drop old ECMs <br />
<br />
if you are facing problems with getting old ECMs, with this feature you are able to drop known ECMs<br />
to enable this feature, you have to define ecm_cache_size or ecm_cache_memory to set the cache-size<br />
<br />
<br />
==== delay ====<br />
{{optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
==== max_time ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
<br />
==== cw_cache_settings ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
cw_cache_settings = caid[&mask][@provid][$servid]:mode:timediff_old_cw[,n]<br />
= [blank] disabled<br />
<br />
* mode:<br />
1 = just write logs @ log-level 8192<br />
2 = drop CWs which match this rule & write logs @ log-level 8192<br />
<br />
* timediff_old_cw:<br />
time = time in miliseconds after a known CW is detected/dropped<br />
<br />
Example:<br />
<br />
cw_cache_settings = 0:2:1500,BEEF@012345:2:620,1337:1:170<br />
* for all CWs not matching any other rule => drop if the CW is known for more then 1500ms<br />
* drop CWs of caid BEEF with provid 012345, if they are known for more then 620ms<br />
* log CWs of caid 1337 with all provids, if they are known for more then 170ms<br />
<br />
<br />
==== cw_cache_size ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
cw_cache_size = count of max. CWs for cw_cache<br />
= 0 (default)<br />
<br />
<br />
==== cw_cache_memory ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
cw_cache_memory = size (in MB) of the cw_cache<br />
= 0 (default)<br />
<br />
<br />
==== ecm_cache_size ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
ecm_cache_size = count of max. ECMs for ecm_cache<br />
= 0 (default)<br />
<br />
<br />
==== ecm_cache_memory ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
ecm_cache_memory = size (in MB) of the ecm_cache<br />
= 0 (default)<br />
<br />
<br />
==== ecm_cache_droptime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
ecm_cache_droptime = time in seconds after a known ECM is dropped with return-code E_INVALID<br />
= 0 (default)<br />
<br />
<br />
==== max_hit_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8910:09/10/2013</span><br />
<br />
max_hit_time = in seconds<br />
<br />
maximum time for cache exchange hits resists in cach for evaluating wait_time, default: 15<br />
<br />
<br />
==== wait_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 8077:01/06/2013</span><br />
<br />
wait_time = milli-seconds<br />
= [blank] none (default)<br />
<br />
wait time for cache exchange (mode 2 & 3 only!)and Cardserverproxy before sending ECM to reader or proxy<br />
<br />
Example:<br />
0:50:250,0200@00009X:50:150:950,0500@000001:150:1602&ffdf:1200<br />
<br />
==== waittime_block_start ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
waittime_block_start = number of (dyn)wait_time timeouts to start blocking the use of (dyn)wait_time for this service(caid:provid:srvid)<br />
= 0 (default)<br />
<br />
<br />
==== waittime_block_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
waittime_block_time = seconds the (dyn)wait_time isn't used and ECMs are forwarded to the reader/s<br />
= 0 (default)<br />
<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional/en}}<br />
<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode:<br />
specify behaviour for counter parameter<br />
<br />
0 = when wait_time expires, serve highest counter's cw got anyway, even if no counter reached.<br />
1 = never serve cw (coming from cacheex) stored in cache if its counter not reaches counter. When wait_time expires, requests<br />
will go to normal readers! Only when a cw reaches counter, it can be served to clients.<br />
<br />
Default = 0<br />
<br />
<br />
* counter:<br />
set minimum cw counter to allow cw is used.<br />
<br />
Default = 1 (use default behaviour: use cw with highest counter when cache is checked)<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = allow bad cycles from a fixed fallback reader. Default = 0<br />
<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== csp_port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
This is a UDP ('''not TCP''') listen port for incoming traffic from csp nodes<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
==== csp_serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
This is the local bind IP of csp_port (see above!)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 disable (default)<br />
= 1 enable<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: not for all NDS SC's!'''<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID enabled for CW cycle check, default: none<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = count<br />
<br />
maximum CW cycle list entries, default = 500, maximum = 4000<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = minutes<br />
<br />
minimum time a learned cycletime resists in memory, default = 0, maximum = 15<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = log bad CW cycle only <br />
1 = drop bad CW cycle (default)<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, <br />
1 = drop old CW cycle, <br />
0 = no drop(default)<br />
<br/><br />
==== cwcycle_sensitive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (or more) same bytes and drop new CW<br />
3 = 3 (or more) same bytes and drop new CW<br />
4 = 4 (or more) same bytes and drop new CW<br />
<br />
<br/><br />
==== cwcycle_usecwcfromce ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = use CW Info from cache exchange<br />
0 = default<br />
<br/><br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
answer when cache exchange timeount expires, if no normal readers are vavailable for sending ECM's::<br />
<br />
0 = immediatly send '''not found''' to client (default)<br />
1 = wait for cache exchange answer until client timeout expires<br />
<br />
==== cacheex_dropdiffs ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
cacheex_dropdiffs = 1 drop incoming not-localgenerated-flagged CWs which differ from the first CW<br />
= 0 (default)<br />
<br />
<br />
==== cacheex_nopushafter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
don't forward CWs from local/proxy-reader via CacheEx, if the defined time_in_ms for the CAID is reached<br /><br />
here in oscam.conf this setting is for evaluating the response-time for local/proxy-readers and is used for CacheEx2-reader/CacheEx3-user as default, when no reader/user cacheex_nopushafter is set.<br />
<br />
cacheex_nopushafter = CAID:time_in_ms[,n]<br />
<br />
<br />
==== cacheex_lg_only_remote_settings ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
possibility to deny cacheex-receiver/client(cx2: user / cx3: reader) to overwrite the following settings @ cacheex-sending-instance<br />
cacheex_localgenerated_only<br />
cacheex_lg_only_tab<br />
<br />
it makes sense if you want to force your local settings.<br />
if the user/reader isnt allowed to overwrite your values, <br />
* it is still possible for the cacheex-receiver to set cacheex_localgenerated_only=1, if the user/reader define cacheex_localgenerated_only_in=1 ; but it is only @ cacheex-sending-instance possible to disable it<br />
* it is still possible for the cacheex-receiver to add cacheex_lg_only_tab, if the user/reader define cacheex_lg_only_in_tab=1234,1337 ; but it is only merged to the sender-instance cacheex_lg_only_tab values<br />
<br />
if cacheex_lg_only_remote_settings @oscam.conf is enabled, the user/reader-settings are ignored.<br />
if cacheex_lg_only_remote_settings @oscam.conf is disabled, the user/reader-settings are used.<br />
<br />
cacheex_lg_only_remote_settings = 0|1 (default: 0 /opt-out)<br />
<br />
<br />
==== cacheex_localgenerated_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are flagged as localgenerated<br /><br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized <br />
<br />
cacheex_localgenerated_only = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_lg_only_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are lg-flagged for these list of caid/provid(s)<br /><br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
<br />
==== cacheex_localgenerated_only_in ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
drop incoming CWs which are NOT flagged as localgenerated<br /><br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized<br />
<br />
cacheex_localgenerated_only_in = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_lg_only_in_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
allow incoming CWs only if they are lg-flagged for these list of caid/provid(s)<br /><br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_in_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
<br />
==== cacheex_lg_only_in_aio_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
use drop lg-only settings (cacheex_localgenerated_only_in & cacheex_lg_only_in_tab) only if peer is detected as cx-aio-patched or svn >= 11588<br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized<br />
<br />
cacheex_lg_only_in_aio_only = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_ecm_filter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
set a global cacheex_ecm_filter<br /><br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized<br />
<br />
cacheex_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
<br />
<br />
==== cacheex_ecm_filter_aio ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
set a global cacheex_ecm_filter which is used if peer is detected as cx-aio-patched or svn >= 11588<br />
the default limit of 15/30 (camd3/cccam) filters is obsolete<br />
<br />
here in oscam.conf, the default value is set; user/reader-settings(cacheex_ecm_filter) are prioritized<br />
<br />
cacheex_ecm_filter_aio = [caid][&mask][@provid][$servid],n<br />
<br />
<br />
==== cacheex_push_lg_groups ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
push all lg-flagged CWs to this/these group/s, without checking the groupmembership of the peer<br />
<br />
cacheex_push_lg_groups = [blank] (default)<br />
= 1[,n]<br />
<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
<br/><br />
<br />
=== csp (UDP) ===<br />
Section only needed if using cache exchange<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:02/16/2013 look at '''[cache]'''!</span><br />
<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6124:12/23/2011</span><br />
<br />
UDP listen port for incoming traffic from csp nodes<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
==== serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6124:12/23/2011</span><br />
<br />
Local bind IP of the above udp port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
=== Camd 33 (TCP) ===<br />
Section required only if camd33 will be used as client protocol!<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for camd 3.3x clients, 0 = disabled, default:0<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # listenig to all<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured camd 3.3x client connection<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
Example:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt = [none]<br />
<br />
==== passive ====<br />
{{Optional/en}}<br />
<br />
force passive camd 3.3x client<br />
<br />
Camd3.3x protocol generally has aktive clients. In certain circumstances the client must switched on only "passive" mode.<br />
<br />
Example:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
==== key ====<br />
{{Optional/en}}<br />
128 bit key<br />
<br />
key for camd 3.3x client encryption<br />
<br />
<br />
Example:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key = # (blank] none (default)<br />
<br />
=== cs357x (UDP) ===<br />
Section required only if cs357x will be used as client protocol! These protocols principle encrypt and build the key from user name.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''cs357x''' was also known as '''camd35''' designated. Both terms mean the same protocol with the same functions and parameters. In the future, to avoid confusion '''only cs357x''' is used.<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
UDP port for camd 3.5x|cs357x clients. Port must be opened at router!<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35|cs3.57x-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== cs378x (TCP) ===<br />
Section required only if cs378x (camd 3.5x in TCP) will be used as client protocol!<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
Port(s) TCP for Cs378x clients (camd 3.5x in TCP mode). Port(s) must be opened at router!<br />
<br />
port@CAID[:ident][,ident]...[;port@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@0500:030B00;22764@0648<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell cs3.78x clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disable<br />
<br />
<br />
Mor here: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== Newcamd (TCP) ===<br />
Section required only if newcamd will be used as client protocol!<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
==== key ====<br />
{{required}}<br />
DES key<br />
Default key for newcamd client encryption.<br />
<br />
Example:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
==== port ====<br />
{{required}}<br />
TCP port/DES key/CAID/ident definitions. Each CAID requires a separate port. If you don't specify a DES key for a port, the default DES Key will be used!<br />
<br />
port[{DES key}]@CAID[:ident][,ident]...[;port[{DES key}]@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@1234:000000 # (CAID 1234 connected with port 15000)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 connected with port 15000. CAID 5678 with port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = [blank]<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
!! Dyn DNS Addresses are not forseen here and won't work !!<br />
<br />
Example:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed = [blank]<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<br />
Example:<br />
keepalive = 1 # (enabled)<br />
keepalive = 0 # (disabled)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
==== mgclient ====<br />
{{Optional/en}}<br />
<br />
Enable mgcamd extended newcamd protocol, allowing for a single connection to work with mutliple providers, default:0<br />
<br />
Example:<br />
mgclient = 1 # (enabled)<br />
mgclient = 0 # (disabled)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br/><br />
<br/><br />
=== '''scam''' ===<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9878:09/29/2014</span><br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port = port<br />
<br />
UDP port for scam server, default = 0<br />
<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br/><br />
<br/><br />
<br />
=== Radegast ===<br />
Section required only if radegast will be used as client protocol!<br />
<br />
{{OSCamConfRadegastParameter}}<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for radegast clients (enables radegast)<br />
port =<br />
= 0 (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br />
==== user ====<br />
{{required}}<br />
<br />
user name for radegast client<br />
user = username<br />
<br />
=== Serial ===<br />
Section required only if seral interface will be used!<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
==== device ====<br />
{{Optional/en}}<br />
<br />
Parameter of device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = name of Serial Device<br />
option = timeout = milli seconds timeout for connection default: 50<br />
= delay milli seconds additive between 2 characters<br />
<br />
supported serial devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
=== Cccam (TCP) ===<br />
Section required only if Cccam will be used as client protocol!<br />
{{OSCamConfCccamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6206:01/07/2012</span><br />
<br />
Port = 0|port[,port...]<br />
<br />
TCP/IP-Ports for CCcam clients, enables Cccam protocol!<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled (default)<br />
<br />
==== version ====<br />
{{Optional/en}}<br />
<br />
<br />
define CCcam version, minimum CCcam version 2.0.11, used with original CCcam only, default:none<br />
<br />
<nowiki><main version>,<version>,<sub version></nowiki><br />
<br />
Example:<br />
version = 2.0.11<br />
<br />
==== reshare ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
reshare level for CCcam clients:<br />
-1 = no resharing<br />
0 = resharing for direct peer only<br />
1 = resharing for direct peer and next level<br />
x = resharing for direct peer and next x level (x for number of level)<br />
10 = (default)<br />
<br />
Example:<br />
reshare = 1 resharing only for direct peer and next level<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
==== reshare_mode ====<br />
{{Optional/en}}<br />
<br />
CCcam reshare mode<br />
0 = reader reshares only received SCs for CCcam readers,<br />
defined filters/CAIDs/idents on other readers (default)<br />
1 = reader reshares received SCs (like=0) and defined services<br />
2 = reader reshares only defined reader services as virtual SCs<br />
3 = reader reshares only defined user services as virtual SCs<br />
4 = reader reshares only received cards<br />
<br />
Every server is shared as hop=0 and with defined reshare values.<br />
<br />
Service reshare only works if positive services defined: no service - no reshare!<br />
<br />
==== ignorereshare ====<br />
{{Optional/en}}<br />
<br />
<br />
CCcam reshare setting:<br />
0 = use reshare setting of server (default)<br />
1 = use reshare setting of reader or user<br />
<br />
Example:<br />
ignorereshare = 1 reshare settings of reader or user are used<br />
<br />
==== stealth ====<br />
{{Optional/en}}<br />
<br />
Behaviour like the original CCcam: no activate partner detection and extended OSCam-CCcam protocol, prevent other OSCam to detect the server as OSCam server.<br />
<br />
stealth = 1 # stealth enabled<br />
= 0 # stealth disabled (default)<br />
<br />
==== minimizecards ====<br />
{{Optional/en}}<br />
<br />
mode how to provide CCcam servers to CCcam clients:<br />
0 = no aggregation, remove duplicates only (default)<br />
1 = based on minimum hop: two SCs with different hops are summarized, new SCs get a smaller hop<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional/en}}<br />
<br />
<br />
interval to provide share list update to CCcam clients in seconds<br />
0 = update based on server updates, values <= 10 are invalid and will be set to 30 <br />
= [blank] 240 (default)<br />
<br />
==== keepconnected ====<br />
{{Optional/en}}<br />
<br />
set CCcam keepalive modus:<br />
0 = disconnect client when max idle time is reached<br />
1 = keep client connected (default)<br />
<br />
==== recv_timeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7672:10/09/2012</span><br />
<br />
recv_timeout = milli-seconds<br />
<br />
set network timeout for receiving data<br />
default = 2000<br />
<br />
==== forward_origin_card ====<br />
{{Optional/en}}<br />
<br />
forward_origin_card = 0|1<br />
<br />
1 = forward ECM request to reader holding this card, loadbalancer, fallback and caching will be disabled <br />
0 = default<br />
<br />
==== nodeid ====<br />
{{Optional/en}}<br />
<br />
nodeid = ID<br />
<br />
set CCcam node ID in hex, default:none<br />
<br />
example<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br/><br />
=== Pandora ===<br />
{{OSCamConfPandoraParameter}}<br />
<br />
==== pand_skip_send_dw ====<br />
<br />
<br />
pand_skip_send_dw = dummy<br />
<br />
<br />
==== pand_allowed ====<br />
<br />
<br />
pand_aloowed = dummy<br />
<br />
<br />
==== pand_usr ====<br />
<br />
<br />
pand_user = dummy<br />
<br />
<br />
==== pand_pass ====<br />
<br />
<br />
pand_pass = dummy<br />
<br />
<br />
==== pand_ecm ====<br />
<br />
<br />
pand_ecm = dummy<br />
<br />
<br />
==== pand_port ====<br />
<br />
<br />
pand_port = dummy<br />
<br />
<br />
==== pand_srvid ====<br />
<br />
pand_srvid = dummy<br />
<br />
<br/><br />
<br/><br />
<br />
=== GBox ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
{{OScamConfGboxParameter}}<br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 {3 3}}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== hostname ====<br />
{{required}}<br />
<br />
hostname = my IP or ddns<br />
<br />
examples:<br />
hostname = 192.168.1.120<br />
hostname = willy.noip.org<br />
<br />
<br/><br />
<br />
==== my_password ====<br />
{{required}}<br />
<br />
my_password = 4 hex bytes, 8 chara<br />
<br />
example:<br />
my_password = 98AF3E25<br />
<br />
<br/><br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port= define incoming UDP port(s) used by Gbox protocol<br />
<br />
port= port#1[[,port#2]...[,port#32]]<br />
<br />
Maximum 32 ports.<br />
<br />
<br/><br />
<br />
==== proxy_card ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy reader card(s) to be reshared into gbox network, default = none<br />
<br />
proxy_card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
example:<br />
<br />
proxy_card = 18300000,0D950400,05050F00 <br />
<br />
<br/><br />
<br />
==== ccc_reshare ====<br />
{{Optional/en}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = enable cccam-cards to be reshared into gbox network, default = 0 (global setting)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' peer specific reshare level to be set in oscam.server [reader] -> cccam_reshare<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' peer specific ident filter can be set in oscam.server [reader] -> ccc_gbx_reshare_ident<br />
<br />
<br/><br />
<br />
==== my_vers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9645:04/09/2014</span><br />
<br />
<br />
my_vers = version<br />
<br />
set gbox version hexadecimal low byte<br />
<br />
default = 2A<br />
<br />
<br/><br />
<br />
==== my_cpu_api ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9712:05/11/2014</span><br />
<br />
<br />
my-cpu_api = byte<br />
<br />
set gbox CPU and API byte in hexadecimal, default = 61<br />
<br />
<br/><br />
<br />
==== gbox_reconnect ====<br />
{{Optional/en}}<br />
<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min:60, max:300<br />
<br />
<br/><br />
<br />
==== accept_remm_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11399:29/01/2018</span><br />
<br />
Accept to send Remote EMMs to specified Server Peer-IDs<br />
<br />
accept_remm_peer = peer#1[[,peer#2]...[,peer#8]]<br />
<br />
<br/><br />
<br />
==== dis_attack_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11360:16/02/2017</span><br />
<br />
Disable creation of attack.txt<br />
<br />
dis_attack_txt = 0|1 - default: 0 <br />
<br />
<br/><br />
<br />
==== log_hello ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11231:20/04/2016</span><br />
<br />
Display hello messages in debug log<br />
<br />
log_hello = 0|1 - default: 1 <br />
<br />
<br/><br />
<br />
==== ignore_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">Updated svn11696:16/09/2021</span><br />
<br />
Ignore specific peer ID(s).<br />
<br />
ignore_peer = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
If peer = dist 1 -> Login of peer rejected<br />
If peer > dist 1 -> card(s) of peer ignored<br />
<br />
<br/><br />
<br />
==== block_ecm ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Block ECM for specific peer ID(s).<br />
<br />
block_ecm = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== tmp_dir ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/2014</span><br />
<br />
gbox tempory directory<br />
<br />
tmp_dir = /path/to/dir <br />
<br />
default: /tmp/.oscam<br />
<br />
<br/><br />
<br />
==== gsms_disable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9714:05/11/2014</span><br />
<br />
<br />
gsms_disable = 0|1<br />
<br />
0 - Gbox Short Message Service (GSMS) is enabled<br/><br />
1 - disable gbox short message service (GSMS)<br/><br />
<br />
default = 1<br />
<br />
<br/><br />
<br/><br />
<br />
==== gbox_save_gsms ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_save_gsms=0|1<br />
<br />
0 = don't save GSMS in configuration<br/><br />
1 = save all GSMS field in configuration<br />
<br />
You need to press save button to really save it!<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_type=0|1<br />
<br />
0 = normal text message<br/><br />
1 = normal text message + OSD (On Screen Display)<br />
<br/><br />
<br/><br />
<br />
==== gbox_dest_peers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_dest_peers = [BOXID[,BOXID]...[,BOXID]]<br />
<br />
Maximum 16 * 2 bytes (4 hexa digits), comma-separated. For broadcast to all use FFFF.<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_txt=Your text to send to peers.<br />
<br />
From 6 to 127 alphanumerical characters.<br />
<br/><br />
<br/><br />
<br />
=== DVBapi ===<br />
{{Optional/en}}<br />
<br />
Section required only if OSCam will also be used as client!<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional/en}}<br />
<br />
DVB API enabled<br />
<br />
Example:<br />
enabled = 0 # disabled (default)<br />
enabled = 1 # enabled<br />
<br />
==== user ====<br />
{{required}}<br />
user name for DVB API client<br />
Example:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
==== au ====<br />
{{Optional/en}}<br />
<br />
AU mode for dvbapi:<br />
au = 0 # disable AU (default)<br />
au = 1 # enable AU<br />
<br />
==== pmt_mode ====<br />
{{Optional/en}}<br />
PMT mode:<br />
pmt_mode = 0 # use camd.socket and PMT file (default)<br />
pmt_mode = 1 # disable reading PMT file<br />
pmt_mode = 2 # disable camd.socket<br />
pmt_mode = 3 # read PMT file on startup only<br />
pmt_mode = 4 # do not use signal handler for monitoring /tmp<br />
pmt_mode = 5 # do not use signal handler to monitor /tmp & disable camd.socket<br />
pmt_mode = 6 # use PMT server mode <span style="background-color:Green;color:White;padding:0 5px;">NEU - NEW - NOUVEAU - NUOVO svn8680:05/06/2013</span><br />
<br />
==== request_mode ====<br />
{{Optional/en}}<br />
CAID request mode:<br />
0 = try all possible CAIDs one by one (default)<br />
1 = try all CAIDs simultaneously<br />
<br />
==== listen_port ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP/IP port for SAT IP clients, filtering has to be done on client site<br />
<br />
0 = disabled (default)<br />
<br />
==== boxtype ====<br />
{{required}}<br />
set boxtype, auto detection of DVB API will be aspired:<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt|qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
ipbox with camd.socket support, currently only with PGI image version 0.6 or above, verified on HD models only<br />
<br />
ipbox-pmt can be used on any DGS based images (with or without camd.socket support), verified on HD models only<br />
<br />
pc is for generic pc support (currently supported on VDR with vdr-plugin-dvbapi)<br />
<br />
==== cw_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
cw_delay = milli-seconds<br />
<br />
delay of CW writing, default = none<br />
<br />
==== delayer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6808:05/14/2012</span><br />
<br />
delayer = milli-seconds<br />
<br />
minimum time to write CW<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
= 1 reopen demux devices in each channel switching,<br />
= 0 default<br />
<br />
==== decodeforever ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = trying to decode on all CAIDs<br />
0 = default<br />
<br />
==== ecminfo_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10722:06/13/15</span><br />
<br />
Define the type of ecm.info file to create, ecminfo_type = 0|1|2|3|4|5<br />
<br />
0 = default oscam syntax<br />
1 = default oscam syntax with ecmtime in ms instead of s<br />
2 = wicardd<br />
3 = mgcamd<br />
4 = cccam<br />
5 = camd3<br />
<br />
==== read_sdt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10766:06/15/15</span><br />
<br />
If it is not yet available, this option automatically add entries in your oscam.srvid2 (or oscam.srvid) and in your oscam.provid files. You need to stay '''more than 30 seconds''' on a channel for the auto-detect to start. So both channel name and provider name are retrieved. If entries already exist they are not changed nor updated, so you keep full control on the content of both files, only missing entries are added.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = disabled (default)<br />
1 = on, do not save FTA channels<br />
2 = on, save FTA channels<br />
<br />
==== write_sdt_prov ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10841:06/27/15</span><br />
<br />
First enable the read_sdt parameter then you can specify if the provider name is saved or not into the oscam.srvid2 or oscam.srvid file. This is not mandatory since the provider name is now retrieved automatically from the oscam.provid file.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = off, do not write provider name into oscam.srvid/2 (default)<br />
1 = on, write provider name into oscam.srvid/2<br />
<br />
=== Anticasc ===<br />
Section is needed if anticascading will be used to protect against unauthorized forwarding CardSharing. <br />
{{OSCamConfAnticascParameter}}<br />
<br />
==== enabled ====<br />
{{required}}<br />
<br />
enabled anti-cascading:<br />
enabled = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== numusers ====<br />
{{Optional/en}}<br />
anti-cascading: user per account (number)<br />
numusers = 0 # anticascading disabled (default)<br />
= 1 # cascading for 1 user allowed ==> (1*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 11 ecms allowed per minute<br />
= 2 # cascading for 2 users allowed ==> (2*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 17 ecms allowed per minute <br><br />
<span style="color:Blue;padding:0;5px"><B>10</B></span> = number you have put in oscam.ac. Default value is 10<br />
<br />
==== sampletime ====<br />
{{Optional/en}}<br />
duration of sample in minutes:<br />
sampletime = 5 # duration 5 minutes<br />
= # [blank] duration 2 minutes (default)<br />
<br />
Ex: numusers = 1 ==> 11 ecms * 5 minutes ==> 55 ecms allowed in 5 minutes <br />
numusers = 2 ==> 17 ecms * 5 minutes ==> 85 ecms allowed in 5 minutes<br />
<br />
==== samples ====<br />
{{Optional/en}}<br />
<br />
number of additionnal ecms allowed (possible values between 2 and 10)<br />
samples = 7 # 7 additional ecms allowed<br />
= # [blank] 10 additional ecms allowed (default)<br />
<br />
==== penalty ====<br />
{{Optional/en}}<br />
Level of the penalty if the user exceeds the result shown in Ex on Sampletime<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay ([[OSCam/en/Config/oscam.conf#fakedelay|fakedelay]])<br />
<br />
penalty can be overwritten per user in oscam.user<br />
<br />
==== aclogfile ====<br />
{{Optional/en}}<br />
file for anti-cascading logging<br />
aclogfile =<br />
= # [blank] no logfile (default)<br />
<br />
==== fakedelay ====<br />
{{Optional/en}}<br />
<br />
fake delay time in milli seconds (possible values between 100 and 3000)<br />
fakedelay = 500 # delay 500 milli seconds<br />
= # [blank] 1000 milli seconds (default)<br />
<br />
==== denysamples ====<br />
{{Optional/en}}<br />
<br />
How many samples should be penalized?<br />
denysamples = 10 # 10 samples will be penalized<br />
= # [blank] 8 Samples will penalized (default)<br />
<br/><br />
<br />
==== acosc_enabled ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br/><br />
acosc_enabled = 0|1<br />
1 = enable anticascading oder SIDs count<br />
0 = default<br />
<br/><br />
==== acosc_max_active_sids ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = count<br />
<br />
maximum activ SIDs with anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br />
<br/><br />
<br />
==== acosc_zap_limit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = count<br />
<br />
zap limit for anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
level of penalty with anticascading over SIDs count:<br />
<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = seconds<br />
<br />
penalty duration for anticascading over SIDs count:<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
==== acosc_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_delay = milliseconds<br />
<br />
delay for anticascading over SIDs count<br />
<br />
0 = unlimites (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
<br />
<br />
<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.conf&diff=13571
OSCam/en/Config/oscam.conf
2021-09-16T10:36:02Z
<p>Felixka: /* ignore_peer */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
==oscam.conf==<br />
<br />
=== The [global] section ===<br />
<br />
The main configuration file for OSCam contains global parameters such as debugging, logging, monitor, protocols and anti-cascading. Sections in oscam.conf are nonrecurring. The [global] section is required. All other sections are optional.<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If a parameter is empty or is not listed in config-file, then apply the default values !<br />
<br />
==== nice ====<br />
{{Optional/en}}<br />
<br />
'''Systempriority'''<br />
<br />
OSCam requires almost no CPU-power. But if CPU-power is required, it should be available immediatly. Values between 20 and -20 are possible. 20 = low, -20 = very high. If this parameter is commented out (#), this function is not called. Important for example for dbox2[http://de.wikipedia.org/wiki/DBOX2], if the error messages "''relocation error:setpriority''". See [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Example:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
===== initial_debuglevel =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10705:06/11/15</span><br />
<br />
Set the debuglevel on startup.<br />
<br />
Example:<br />
initial_debuglevel = 8<br />
<br />
Default:<br />
initial_debuglevel = 0<br />
<br />
===== pidfile =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8176/01/24/2013</span><br />
<br />
pidfile = set pidfile, [blank] none (default)<br />
<br />
Change PID file name an path. If default = oscam.pid in /tmp<br />
<br />
Example:<br />
pidfile = /var/run/oscam.pid<br />
<br />
===== logfile =====<br />
{{optional/en}}<br />
<br />
Logging target<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
You can define a maximum of one filename (not more!) and additionally to log to stdout or syslog (you can also only log to stdout or syslog and omit the filename).<br />
<br />
Opportunities:<br />
<br />
logfile = /var/log/oscam.log # file or linux device (for example /dev/tty)<br />
logfile = syslog # log to syslogd <br />
logfile = stdout # showing the log on the console<br />
<br />
Example:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format logfile:<br />
CAID&ident/provider/length:checksum<br />
<br />
===== ecmfmt =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
define ECM log format, default:c&p/i/s/l:h <br />
<br />
possible variables: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and CCcam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , this ID will be replaced with the tier-description from oscam.tiers (if found)<br />
w = CW<br />
y = payload (short, 3 bytes)<br />
Y = payload (long, 6 bytes)<br />
<br />
<br />
use a value as prefix to hide variable with this value, control characters will be escaped by "\" <br />
<br />
example:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w HOP:j<br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn10048:11/30/2014</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs will be dropped, if CWs do not have an odd an even sample (default)<br />
1 = disabled<br />
<br />
===== loghistorysize =====<br />
{{optional/en}}<br />
<br />
loghistorysize = bytes<br />
<br />
size of log message history in web interface or monitor<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) #stage 2 is used only if '''preferlocalcards = 1''' was activated in [global] section. <br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
example<br />
<br />
P/2/2/2 or L/2/4/4<br />
<br />
===== maxlogsize =====<br />
{{required}}<br />
<br />
Here the maximum size of logfiles are set in KBytes. This is especially important for server with only a small amount of memory (dbox2). Therefore it is strongly recomended to determine carefully that size at such servers. Not infrequently a system "bursting" because the logfile uncontrolled large scale adopted!<br />
<br />
Example<br />
maxlogsize = 20 # Logfile reaches to 20 KBytes<br />
= 0 # Logfile '''unlimited'''<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile reaches to 10 KBytes (default)<br />
<br />
===== logduplicatelines =====<br />
{{optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8290/02/05/2013</span><br />
<br />
logduplicatelines = 0|1<br />
<br />
1 = disable detection of duplicate lines in log file<br />
0 = enable detection of duplicate lines in logfile = default<br />
<br />
===== disablelog =====<br />
{{optional/en}}<br />
<br />
switches logfile '''off'''<br />
1 = '''no log''' <br />
0 = '''log''' <br />
<br />
Example:<br />
disablelog = 1 # '''no''' log <br />
<br />
Default:<br />
disablelog = 0 # '''log'''<br />
<br />
===== cwlogdir =====<br />
{{Optional/en}}<br />
<br />
<br />
A path for cw logging can be configured here. The path is relative to the work directory and must exist. Otherwise no logs are created and no errors are reported. <br />
<br />
CWs (control words) are the answers of the card which decrypts a certain channel for some seconds before the next cw is transmitted. The CW log file can be used for delayed decoding of this channel. This is also called offline decoding. Watch this [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
Oscam creates a new *.cwl file for each channel and each day. The file name contains the date, service ID and service name, e.g. 110808_I000B_Sky_Cinema_+1.cwl with this contents:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
All cws are logged if at least one user watches the channel. Please choose a path with enough space, since per day and channel some 10KB of data are created. A script that moves/deletes the log files regularly is recommended.<br />
<br />
Example:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] no path for cw-log, logging disabled<br />
<br />
===== emmlogdir =====<br />
{{Optional/en}}<br />
<br />
Setting a path for emm-log. You can define with the "saveemm-*"-Parameters in oscam.server which EMMs should be logged.<br />
<br />
Example:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] the config folder will be used for emm logging<br />
<br />
===== usrfile =====<br />
{{Optional/en}}<br />
<br />
Set a name für userfile<br />
<br />
Format of the userfile: <br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Example:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
===== disableuserfile =====<br />
{{Optional/en}}<br />
<br />
Now it is crazy: Even if a logfile is switched on (see logfile), the userfile can be turned off!<br />
<br />
Example:<br />
disableuserfile = 1 # '''no''' userfile <br />
= 0 # '''userfile'''<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
===== usrfileflag =====<br />
{{Optional/en}}<br />
<br />
Setting the logging-modus<br />
0 = Only login and logout will be logged<br />
1 = Each zapping from client will be logged<br />
Default is 0<br />
<br />
Example:<br />
usrfileflag = 1 # All will be logged<br />
<br />
Default:<br />
usrfileflag = 0 # Only login und logout will be logged<br />
<br />
===== saveinithistory =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn7128:07/02/2012</span><br />
<br />
Save SC init history to /tmp/.oscam/reader<number>. Needed to show entitlements.<br />
<br />
Example:<br />
saveinithistory = 1 # save to /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # no save<br />
<br />
===== mailfile =====<br />
{{Optional/en}}<br />
<br />
mailfile = file<br />
<br />
define file saving NDS Videogard mail messages from provider. Default: [blank] none<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
delay in millisencons for asking cache exchange mode 1 readers, default: none<br />
<br />
===== disablemail =====<br />
{{Optional/en}}<br />
<br />
disablemail = 0|1<br />
<br />
disable saving NDS Videogard mail messages form provider. Default = 1 (disabled)<br />
<br />
===== sysloghost =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set remote syslog server will be activated. Messages will be sent to this IPv4 address. If not set remote syslog server not work.<br />
<br />
Example:<br />
sysloghost = 192.168.1.167<br />
<br />
===== syslogport =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set ''sysloghost'' remote syslog server will be activated. Messages will be sent to this port. If not set port 514 is used as default. <br />
<br />
Example:<br />
syslogport = 515<br />
<br />
Default:<br />
syslogport = 514<br />
<br />
==== Reader ====<br />
<br />
===== enableled =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
===== serialreadertimeout =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8541:03/13/2013</span><br />
<br />
'''Only using Serialreader!'''<br />
<br />
timeout for serial reader in milli-seconds<br />
<br />
Example:<br />
serialreadertimeout = 1200 # Timeout after 1200 milli-seconds<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout after 1500 milli-seconds<br />
<br />
===== waitforcards =====<br />
{{Optional/en}}<br />
<br />
wait for local SCs on startup before opening network ports<br />
<br />
Example:<br />
waitforcards = 0 # don't wait<br />
<br />
Default:<br />
waitforcards = 1 # wait<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional/en}}<br />
<br />
waitforcards_extra_delay = milli seconds<br />
<br />
additional delay in milli seconds after waiting for local SCs on startup before opening nework ports<br />
<br />
default = 500<br />
<br />
===== preferlocalcards =====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn9605:03/29/2014</span><br />
<br />
try decoding on local cards first<br />
<br />
Example:<br />
preferlocalcards = 0 # local cards are used like remote reader<br />
preferlocalcards = 1 # prefer CacheEx sources <br />
preferlocalcards = 2 # prefer local cards<br />
<br />
Default:<br />
preferlocalcards = 1 # prefer CacheEx sources<br />
<br />
===== readerrestartseconds =====<br />
{{Optional/en}}<br />
<br />
waiting time in seconds beetween restarts<br />
<br />
Example:<br />
readerrestartseconds = 10 # waiting time 10 seconds<br />
= 0 # '''no restarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # waiting time 5 seconds<br />
<br />
===== block_same_ip =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_ip = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same ip address, default = 1<br />
0 = no reject<br />
<br />
===== block_same_name =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_name = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same name, default = 1<br />
0 = no reject<br />
<br />
==== Cache ====<br />
<br />
===== cachedelay =====<br />
{{optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
===== max_cache_time =====<br />
<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
===== max_cache_count =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = count, default 1000<br />
<br />
maximum CWs in cache<br />
<br />
===== cacheexwaittime =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
maximum wait time for a cache entry in milli seconds, default:50 <br />
<br />
===== cacheexenablestats =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== Client ====<br />
<br />
===== clienttimeout =====<br />
{{Optional/en}}<br />
<br />
value in milli-seconds for client process to wait for key<br />
<br />
Examples:<br />
clienttimeout = 10000 # after 10 seconds timeout<br />
clienttimeout = 10 # timeout after 10 milli-seconds! (see Tip below)<br />
clienttimeout = 8 # timeout after 8000 milli-seconds (= 8 seconds), see Tip below<br />
Default:<br />
clienttimeout = 5000 # timeout after 5000 milli-seconds (=5 seconds)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Values < 10 (so 1 to 9) are multiplicated with 1000, so a "5" results in 5000 ms.<br />
<br />
===== clientmaxidle =====<br />
{{Optional/en}}<br />
<br />
value for client process being idle before disconnect in seconds<br />
<br />
Example:<br />
clientmaxidle = 200 # Disconnect after 200 seconds<br />
= 0 # idle disconnect disabled<br />
<br />
Default:<br />
clientmaxidle = 120 # Disconnect after 120 seconds<br />
<br />
===== suppresscmd08 =====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35[cs3.57x]-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
==== fallbacktimeout ====<br />
{{Depends/en}}<br />
<br />
At several readers (see Chapter [reader] in oscam.server) one reader can be defined to them, for example in case of failure of the other readers, the traffic falls back.<br />
Maximum waiting time of the [[Cardserver]]s in milliseconds for primary [[Reader]], before [[Fallback]]-Reader (if any!) are questioned.<br />
<br />
Example:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The value must be greater than the value in "serialreadertimeout", otherwise the default is used.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = milliseconds <br />
<br />
time falling back to CAID restricted fallback reader, default: 2500<br />
<br />
<br />
<br />
==== sleep ====<br />
{{Optional/en}}<br />
<br />
time waiting for inactive users in minues, can be overwritten per user in oscam.user<br />
<br />
Example:<br />
sleep = 5 # waiting time 5 minutes<br />
<br />
Default:<br />
sleep = # [blank] no waiting time<br />
<br />
==== serverip ====<br />
{{optional/en}}<br />
<br />
Bind service to specified IP-address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam listen to all IP's<br />
<br />
==== bindwait ====<br />
{{Optional/en}}<br />
<br />
value in seconds to wait for bind request to complete. If OSCam within this time can not bind, he finished with "Bind Request failed".<br />
<br />
Causes may include:<br />
* Double assignment of ports<br />
* "crashed" OSCam has not released the ports again<br />
* OSCam was started serveral times while<br />
<br />
Example:<br />
bindwait = 20 # waiting time 20 seconds<br />
<br />
Default:<br />
bindwait = 120 # waiting time 120 seconds<br />
<br />
==== netprio ====<br />
{{Optional/en}}<br />
<br />
network priority - This sets the value of SO_PRIORITY on network connections. Basically this leads to setting the TOS fields of the sent IP packages so that QoS can be better used.<br />
<br />
Beispiel:<br />
netprio = 1 # Priority 1<br />
<br />
Default:<br />
netprio = 0 # system given<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional/en}}<br />
<br />
set mode for DNS resolving: These are different libc calls to resolve dns names and some older systems have problems with the newer implementation ''getadressinfo'' (getadressinfo is also threadsafe whereas ''gethostbyname'' is not and thus it has some locks around) or have stripped them from their images (dbox2 was such a candidate I think) even though it is available at compile time. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Example:<br />
resolvegethostbyname = 1 # gethostbyname<br />
<br />
Default:<br />
resolvegethostbyname = 0 # adressinfo system given<br />
<br />
==== failbantime ====<br />
{{Optional/en}}<br />
<br />
time for IP based blocking for clients with an invalid login attempt in minutes<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP will be blocked for 5 minutes. New logins are denied.<br />
# no clientthread will be created.<br />
<br />
Default:<br />
failbantime = 0 # failban off (default)<br />
<br />
==== failbancount ====<br />
{{Optional/en}}<br />
<br />
Failbancount = Number of allowed failed attempts with incorrect data <br />
= 0 (default) IP is now blocked on the first try with incorrect data!<br />
<br />
If within '''failbantime''' more than in '''failbancount''' allowed trials to be registered, the IP for the remainder failbantime is locked. After a period of failbantime are again full failbancount available. Failbancount is thus a relaxation of rules!<br />
<br />
==== dropdups ====<br />
{{Optional/en}}<br />
<br />
mode for duplicate client connections<br />
<br />
0 = mark client as duplicate, but don't disconnect them (default)<br />
1 = drop duplicate connections instead of marking as duplicate<br />
<br />
==== unlockparental ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7289:08/27/2012</span><br />
<br />
'''Only Seca and Viaccess'''<br />
<br />
unlock parental mode option to disable pin code request for adult movie.<br />
In order to work properly, this option may required that you define the card PIN code in your card reader configuration.<br />
<br />
Example:<br />
unlockparental = 1 # parental lock mode disabled<br />
<br />
Default:<br />
unlockparental = 0 # parental lock mode enabled<br />
<br />
==== double_check ====<br />
{{Optional/en}}<br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other, lb_nbest_readers must be set to 2 or higher<br />
<br />
Example:<br />
double_check = 1 # on<br />
<br />
Default:<br />
double_check = 0 # off<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|first two digits of CAID1],[CAID2|first two digits of CAID2]... <br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other for defined CAID or first two bytes of CAID, lb_nbest_readers must be set to 2 or higher, default:none <br />
<br />
<br />
<br />
==== Loadbalancer ====<br />
<br />
===== lb_mode =====<br />
{{Optional/en}}<br />
<br />
'''loadbalance mode'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If load balancing is activated here, it may in oscam.server among services and ident are '''no entries'''!<br />
<br />
If there are 2 or more of the same SC, the load can be distributed evenly on the cards. For more see [[OSCam/en/Loadbalancing|Loadbalancing]]<br />
<br />
Example:<br />
lb_mode = 0 loadbalance disabled, ECMs go to all readers<br />
lb_mode = 1 fastest reader first, after 5 ECMs the reader with the fastest response time will be selected<br />
lb_mode = 2 oldest reader first, reader with the longest no answer<br />
lb_mode = 3 lowest usage level, the usage level will be calculated by the sum of 5 ECMS response times, the higher a reader is busy, the higher is usage level<br />
lb_mode = 10 LB is switched off, but statistics are build<br />
<br />
<br />
Default:<br />
lb_mode = 0 # disabled<br />
<br />
===== lb_save =====<br />
{{Optional/en}}<br />
<br />
Save autoloadbalance statistics (counts). To save CPU power a minimum counts of 100 is recommended.<br />
<br />
Example:<br />
lb_save = 100 # counts of ECM's after statistics are saved<br />
<br />
Default:<br />
lb_save = 0 # no svae<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional/en}}<br />
<br />
set count of best readers for loadbalancing.<br />
<br />
Example:<br />
lb_nbest_readers = 2 # requests always go to two reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # requests go to one reader<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional/en}}<br />
<br />
set count of fallback readers for loadbalancing<br />
<br />
Example:<br />
lb_nfb_readers = 2 # two fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1 # one fallbackreader<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mode:<br />
= 0 # standard late reopening of blocker readers (default)<br />
= 1 # fast reopening of blocker readers<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5893:08/19/2011</span><br />
<br />
Set count of best readers per CAIDs for loadbalancing, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
<br />
lb_nbest_percaid = # number<br />
= [blank] # none (default)<br />
<br />
example: <br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wiil be blocked until statistics has been cleaned<br />
1 = default<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = force reopening immidiatly all failing readers if no matching was found<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional/en}}<br />
<br />
minimal ECM count to evaluate loadbalancing values<br />
<br />
Example:<br />
lb_min_ecmcount = 2 # 2 counts<br />
<br />
Default:<br />
lb_min_ecmcount = 5 # 5 counts<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional/en}}<br />
<br />
Maximum ECM count before resetting loadbalancing values.<br />
<br />
Example:<br />
lb_max_ecmcount = 200 # 200 counts<br />
<br />
Default:<br />
lb_max_ecmcount = 500 # 500 counts<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional/en}}<br />
<br />
time in seconds between retrying failed readers/CAIDs/providers/services<br />
<br />
Example:<br />
lb_reopen_seconds = 500 # retry after 500 seconds<br />
<br />
Default:<br />
lb_reopen_seconds = 900 # retry after 900 seconds<br />
<br />
===== lb_retrylimit =====<br />
{{Optional/en}}<br />
<br />
Retry next readers '''only''' if response time is higher then lb_retrylimit in '''milli seconds'''.<br />
<br />
Example:<br />
lb_retrylimit = 500 # retry next reader only, if response time is higher than 500 ms<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
===== lb_savepath ===== <br />
{{Optional/en}}<br />
<br />
Filenanme for saving loadbalancing statistics<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional/en}}<br />
<br />
hours after the loadbalancing statistics will be deleted<br />
<br />
default = 336<br />
<br />
===== lb_use_locking =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6166:12/28/2011</span><br />
<br />
disable parallel and identical ECM requests<br />
<br />
<br />
1 = on<br />
0 = off # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* You should choose this option only if:<br />
** slow system<br />
** high load<br />
** the same ECM requests come not from the cache, but will continue to the confirmed reader.<br />
<br />
* Adventages, if activated:<br />
** By synchronizing, an ECM request made by one. The identification of cache or request and assignment of the reader by loadbalancer is always successful.<br />
<br />
* Disadventages, if activated:<br />
** The synchronisation prevents multithreading and the probability of higher response times.<br />
<br />
* Adventages, if NOT activated:<br />
** Faster transit times for ECM requests<br />
<br />
* Disadventages, if NOT activated:<br />
** May have dual (n-fold) possible requests to the readers.<br />
<br/><br />
<br />
===== lb_retrylimits =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn:5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,Caid2:time2]...<br />
<br />
loadbalancing retry limit time per CAID in milliseconds, wilcard CAIDs with 2-digit Caids possible<br />
<br />
default = none<br />
<br />
example: <br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
ignore provider information CAIDs to reduce statistic date, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
example: <br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
default = none<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # enable automatic timeout based on load balancing statistics<br />
= 0 # default<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = percent<br />
<br />
percent added to average time as timeout time<br />
default = 30<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = milli seconds<br />
<br />
minimal time added to average time as timeout time<br />
default = 300<br />
<br />
===== lb_max_readers =====<br />
{{Optional/en}}<br />
<br />
lb_max_readers = limit (number)<br />
<br />
restrict the reader count to limit during learning<br />
<br />
0 = unlimited (default)<br />
x = restrict loadbalancer readers to limit x (number)<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional/en}}<br />
<br />
lb_auto_betatunnel = 0|1<br />
<br />
enable automatic Betacrypt tunneling for CAIDs 1801, 1833, 1834 and 1835 in loadbalancing mode<br />
lb_auto_betatunnel = 0 # disabled<br />
= 1 # enabled (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Betacrypt definition in oscam.user with betatunnel will be prefered [[streamboard:wiki/OSCam/en/Config/oscam.user#betatunnel|User-Betatunnel]]!<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
set mode for automatic Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only) <br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = number<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = always Betacrypt<br />
105 = represents the middle<br />
200 = always Nagravision<br />
<br />
=== Monitor ===<br />
'''Only if monitor is used!'''<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
==== port ====<br />
{{Optional/en}}<br />
UDP port for monitor<br />
port = 0 # monitor disabled<br />
= # port number<br />
<br />
Beispiel:<br />
port = 24480 # monitor on, port = 24480<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
serverip = # IP adress<br />
= # [blank] all IP's (default)<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured monitor connection<br />
[,IP address|IP address range]...<br />
<br />
Possible<br />
* one or more IP adresses<br />
* one or more IP adress ranges<br />
* mixture of IP adresses and IP adress ranges<br />
<br />
Example<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 and IP range 192.168.0.0 to 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] no secured monitor connection<br />
<br />
==== aulow ====<br />
{{Optional/en}}<br />
<br />
time no EMM occurs so that client is set to low in minutes<br />
<br />
Example<br />
aulow = 30 # After 30 minutes whithout EMM client will be switched from "active" to "on" (default).<br />
<br />
==== monlevel ====<br />
{{Optional/en}}<br />
<br />
monitor-level<br />
0 = no access to monitor (default)<br />
1 = only server and own procs<br />
2 = all procs, but viewing only<br />
3 = all procs, reload of oscam.user possible<br />
4 = complete access<br />
<br />
Example<br />
monlevel = 4 # complete access<br />
<br />
monlevel can be overwritten per user in oscam.user!<br />
<br />
==== appendchaninfo ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8546:03/13/2013<br />
</span><br />
<br />
Append channel name on log messages. Very useful when using [webif]!<br />
appendchaninfo = 1 # append chanel name<br />
= 0 # no append chanel name (default)<br />
<br />
=== lcd ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
==== lcd_outputpath ====<br />
{{Optional/en}}<br />
<br />
Path for LCD output<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
==== lcd_hideidle ====<br />
{{Optional/en}}<br />
<br />
hide reader in LCD output if reader idle > 20 seconds, default:0 <br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional/en}}<br />
<br />
LCD refresh interval (minimum 5), default:10<br />
<br />
=== WebIf ===<br />
'''Only if WebIf is used!'''<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
==== File format to send EMMs via the webinterface ====<br />
(by Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention'''<br />
<br />
* File has to be in TXT format.<br />
* The EMM-file should contain each PRE-CAM EMM in a new line.<br />
* EMMs should be in HEX representation.<br />
** Example: AABBCCDD...<br />
*Spaces and tabs between the bytes are allowed:<br />
**AA BB CC DD...<br />
*The HEX representation of each EMM's byte can be represented by upper or lower case - even mixed is allowed:<br />
**AA aa Aa aA...<br />
*Other chars and comments are not allowed.<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
<br />
default is 8888 if no httpport is set<br />
port for web interface,<br />
0 = disabled, praefix + = enable SSL<br />
<br />
Example<br />
httpport = 83 # Webinterface listening on '''http-port 83'''<br />
= +83 # Webinterface listening on '''https-port 83''' (SSL)<br />
0 # Webinterface disabled<br />
<br />
==== httpcert ====<br />
{{Optional/en}}<br />
<br />
file for http SSL certificate<br />
httpcert = oscam.cert # (look there)<br />
= # [blank] file oscam.pem (embedded) is used<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
example<br />
httpforcesslv3 = 0 none (default)<br />
= 1 force using SSLV3<br />
<br />
==== httpuser ====<br />
{{Optional/en}}<br />
<br />
Username for password protection. [blank] is default, of which is strongly discouraged! <br />
httpuser = # xyxyxy (all characters and figures are allowed)<br />
<br />
==== httppwd ====<br />
{{Optional/en}}<br />
<br />
Password for password protection. It is the same as for httpuser.<br />
httppwd = # 123456<br />
<br />
'''The ''user'' and ''pwd'' parameters are queried when connecting to the webinterface in a messagebox. If they are missing ore corrupted a message ''Forbidden'' appears and the connection is aborted!'''<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6625:05/15/2012</span><br />
<br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Do not add the content of the embedded CSS before the content of the custom CSS (default)<br />
1 # embedded CSS will be added before external custom CSS (specified by the [[#httpcss|httpcss]] parameter)<br />
<br />
This parameter can be used to override the embedded CSS with custom styles. To see the current CSS styles use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
==== httpcss ====<br />
{{Optional/en}}<br />
<br />
path for external CSS file<br />
<br />
For webinterface different styles are available. Put custom CSS files (ending with .css extension) in the oscam config directory to managed your custom styles with WebIf.<br />
<br />
Example<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] embedded style is used (default)<br />
<br />
To see the current CSS style, use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
Styles you find here: [[Streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
==== httptpl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7083:06/25/2012</span><br />
<br />
path for external templates and picons<br />
httptpl =<br />
= # [blank] No external templates<br />
<br />
path for external templates and picons, multiple simultaneously templates and picons are possible by creat‐ <br />
ing sub folders (maximum length of 32 alphanumeric characters), sub folders naming is corresponding to sub <br />
folder in URL, default:none <br />
<br />
example <br />
httptpl = /this/is/my/path <br />
<br />
folder with multiple templates: <br />
/this/is/my/path/template<br />
/this/is/my/path/template2 <br />
<br />
valid URLs: <br />
http://host:port/template1 <br />
http://host:port/template2<br />
<br/><br />
<br/><br />
==== httpoverwritebakfile ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = overwrite backup configurations files (*.bak)<br />
0 = default<br />
<br/><br />
<br/><br />
<br />
<br />
<br />
==== httplocale ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
set the "locale environment"<br />
<br />
default = blank [none]<br />
<br />
look here::<br />
<br />
http://en.wikipedia.org/wiki/locale<br />
<br />
==== httpjscript ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
path for oscam.js javascript, def: none<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional/en}}<br />
<br />
status refresh in seconds<br />
<br />
httprefresh = 7 # status will be refreshed after 7 seconds<br />
= # [blank] no refreshing<br />
<br />
==== httppollrefresh ====<br />
{{Optional/en}}<br />
<br />
refreshtime for polling in seconds<br />
<br />
httppollrefresh = 60 # polling will be refreshed after 60 seconds<br />
= # [blank|0] no refreshing poll<br />
<br />
==== httpshowpicons ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # show picons in userlist<br />
0 # default<br />
<br />
If this parameter is enables, then a new column is added to the USERS tab which display the picons of the last watched channels by active users. The folder where the picons must be configured in the httppiconpath.<br />
<br />
Possible format are:<br />
IC_caid_srvid.tpl<br />
IC_caid_provid_srvid.tpl<br />
IC_servicename.tpl<br />
<br />
added support for picons by channel name<br /><br />
syntax is:<br /><br />
take service-name from oscam.srvid,<br /><br />
replace all upper-case letters with lower case,<br /><br />
replace * with star,<br /><br />
replace & with and,<br /><br />
replace + with plus,<br /><br />
remove everything but a-z and 0-9,<br /><br />
if the result is name, the picon file will be IC_name.tpl<br /><br />
for example:<br /><br />
service-name "BBC-ONE +HD"<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
if service-name ends with hd, and picon is not found, fallback to name without hd, example:<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
-> not found, search for:<br /><br />
picon file: "IC_bbconeplus.tpl"<br /><br />
<br />
==== httphideidleclients ====<br />
{{Optional/en}}<br />
<br />
Enables hiding clients after idle time set with parameter ''' hideclient_to''' in section [monitor].<br />
httphideidleclients = 1 # hide<br />
= 0 # hide not (default)<br />
<br />
==== hideclient_to ====<br />
{{Optional/en}}<br />
<br />
Time to hide clients in the monitor if not sending requests. See also parameter '''httphideidleclienst''' in section [webif].<br />
hideclient_to = 1 # hide clients<br />
= 0 # no hide<br />
<br />
==== httphidetype ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
type = letter which defines types to hide in web interface status page (see Typ column), <br />
default: none. s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
==== httpscript ====<br />
{{Optional/en}}<br />
<br />
Path to an executable script which you wish to start from web interface<br />
httpscript = # path<br />
= # [blank] no path<br />
<br />
You can run script file from script.html (SCRIPTS item in main menu)<br /><br />
If the script file contains the "echo" will be it displayed in a Web interface.<br />
<br />
If the file can not run displays<br />
[Error]: Script "name_of_script.sh" not executable!<br />
<br />
If does not exist script displays<br />
[Error]: Script "name_of_script.sh" not found!<br />
(Works If you delete the script and refresh page)<br />
<br />
==== httpallowed ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8842:08/17/2013</span><br />
<br />
http web interface connections allowed. [blank] is allowed (default), but that makes no sense! If the webinterface to be used, then there must be a way to connect with him. Therefore we declare this parameter as '''mandatory'''!<br />
<br />
With '''::1''' OSCam decides to resolve 'localhost' to '''IPv6'''!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
<br />
<br />
Example<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host and range 192.168.0 are allowed<br />
resolving to IPv6<br />
<br />
'''default values'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1<br />
<br />
==== httpdyndns ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6558:03/21/12</span><br />
<br />
http web interface connections allowed<br />
<br />
httpdyndns = hostname [,hostnahme][,hostname]<br />
<br />
Example<br />
httpdyndns = host1.example.com,host2.example.com<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional/en}}<br />
<br />
write config:<br />
0 = all not empty parameters, all not default parameters, all parameters not containing the same value as the same parameter in global configuration (default)<br />
1 = all parameters<br />
<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional/en}}<br />
<br />
read only modus for web interface<br />
<br />
httpreadonly = 1 # only read<br />
= 0 # all is possible (default)<br />
<br />
<br />
==== httppiconpath ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9463/01/28/2014</span><br />
<br />
httppiconpath = path<br />
<br />
path to picons, default [blank] none<br />
<br />
====httphelplang====<br />
{{required}}<br />
<br />
set right language for wiki entry point<br />
de|en|fr <available wiki languages><br />
<br />
==== httposcamlabel ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
set individual label in web interface header, default: OSCam<br />
<br />
==== http_status_log ====<br />
{{Optional/en}}<br />
<br />
http_status_log = 0|1<br />
1 = display log in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowreaderinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowreaderinfo = 0|1<br />
1 = display readers informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowecminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowecminfo = 0|1<br />
1 = display readers and users ECM informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowuserinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowuserinfo = 0|1<br />
1 = display users informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowcacheexinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowcacheexinfo = 0|1<br />
1 = display CacheEX informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowmeminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowmeminfo = 0|1<br />
1 = display memory usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowloadinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowloadinfo = 0|1<br />
1 = display load average and CPU usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
<br/><br />
<br/><br />
<br />
=== [cache] ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW since svn 8358:02/16/2013</span><br />
<br />
{{OSCamConfCacheParameter}}<br />
<br />
'''cw_cache - info'''<br /><br />
cache of CWs which are saved to detect/drop old CWs arriving via CacheEx<br />
<br />
to enable this feature, you have to define cw_cache_size or cw_cache_memory to set the cache-size<br />
and cw_cache_settings to define for what CWs which action is taken. <br />
<br />
if cw_cache_size or cw_cache_memory is defined, the default is, that incoming known CWs older then 15 seconds are dropped, cause they are useless.<br />
<br />
<br />
'''ecm_cache - info'''<br /><br />
<br />
cache of ECMs which are saved to detect/drop old ECMs <br />
<br />
if you are facing problems with getting old ECMs, with this feature you are able to drop known ECMs<br />
to enable this feature, you have to define ecm_cache_size or ecm_cache_memory to set the cache-size<br />
<br />
<br />
==== delay ====<br />
{{optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
==== max_time ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
<br />
==== cw_cache_settings ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
cw_cache_settings = caid[&mask][@provid][$servid]:mode:timediff_old_cw[,n]<br />
= [blank] disabled<br />
<br />
* mode:<br />
1 = just write logs @ log-level 8192<br />
2 = drop CWs which match this rule & write logs @ log-level 8192<br />
<br />
* timediff_old_cw:<br />
time = time in miliseconds after a known CW is detected/dropped<br />
<br />
Example:<br />
<br />
cw_cache_settings = 0:2:1500,BEEF@012345:2:620,1337:1:170<br />
* for all CWs not matching any other rule => drop if the CW is known for more then 1500ms<br />
* drop CWs of caid BEEF with provid 012345, if they are known for more then 620ms<br />
* log CWs of caid 1337 with all provids, if they are known for more then 170ms<br />
<br />
<br />
==== cw_cache_size ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
cw_cache_size = count of max. CWs for cw_cache<br />
= 0 (default)<br />
<br />
<br />
==== cw_cache_memory ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
cw_cache_memory = size (in MB) of the cw_cache<br />
= 0 (default)<br />
<br />
<br />
==== ecm_cache_size ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
ecm_cache_size = count of max. ECMs for ecm_cache<br />
= 0 (default)<br />
<br />
<br />
==== ecm_cache_memory ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
ecm_cache_memory = size (in MB) of the ecm_cache<br />
= 0 (default)<br />
<br />
<br />
==== ecm_cache_droptime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
ecm_cache_droptime = time in seconds after a known ECM is dropped with return-code E_INVALID<br />
= 0 (default)<br />
<br />
<br />
==== max_hit_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8910:09/10/2013</span><br />
<br />
max_hit_time = in seconds<br />
<br />
maximum time for cache exchange hits resists in cach for evaluating wait_time, default: 15<br />
<br />
<br />
==== wait_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 8077:01/06/2013</span><br />
<br />
wait_time = milli-seconds<br />
= [blank] none (default)<br />
<br />
wait time for cache exchange (mode 2 & 3 only!)and Cardserverproxy before sending ECM to reader or proxy<br />
<br />
Example:<br />
0:50:250,0200@00009X:50:150:950,0500@000001:150:1602&ffdf:1200<br />
<br />
==== waittime_block_start ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
waittime_block_start = number of (dyn)wait_time timeouts to start blocking the use of (dyn)wait_time for this service(caid:provid:srvid)<br />
= 0 (default)<br />
<br />
<br />
==== waittime_block_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
waittime_block_time = seconds the (dyn)wait_time isn't used and ECMs are forwarded to the reader/s<br />
= 0 (default)<br />
<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional/en}}<br />
<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode:<br />
specify behaviour for counter parameter<br />
<br />
0 = when wait_time expires, serve highest counter's cw got anyway, even if no counter reached.<br />
1 = never serve cw (coming from cacheex) stored in cache if its counter not reaches counter. When wait_time expires, requests<br />
will go to normal readers! Only when a cw reaches counter, it can be served to clients.<br />
<br />
Default = 0<br />
<br />
<br />
* counter:<br />
set minimum cw counter to allow cw is used.<br />
<br />
Default = 1 (use default behaviour: use cw with highest counter when cache is checked)<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = allow bad cycles from a fixed fallback reader. Default = 0<br />
<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== csp_port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
This is a UDP ('''not TCP''') listen port for incoming traffic from csp nodes<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
==== csp_serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
This is the local bind IP of csp_port (see above!)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 disable (default)<br />
= 1 enable<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: not for all NDS SC's!'''<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID enabled for CW cycle check, default: none<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = count<br />
<br />
maximum CW cycle list entries, default = 500, maximum = 4000<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = minutes<br />
<br />
minimum time a learned cycletime resists in memory, default = 0, maximum = 15<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = log bad CW cycle only <br />
1 = drop bad CW cycle (default)<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, <br />
1 = drop old CW cycle, <br />
0 = no drop(default)<br />
<br/><br />
==== cwcycle_sensitive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (or more) same bytes and drop new CW<br />
3 = 3 (or more) same bytes and drop new CW<br />
4 = 4 (or more) same bytes and drop new CW<br />
<br />
<br/><br />
==== cwcycle_usecwcfromce ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = use CW Info from cache exchange<br />
0 = default<br />
<br/><br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
answer when cache exchange timeount expires, if no normal readers are vavailable for sending ECM's::<br />
<br />
0 = immediatly send '''not found''' to client (default)<br />
1 = wait for cache exchange answer until client timeout expires<br />
<br />
==== cacheex_dropdiffs ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
cacheex_dropdiffs = 1 drop incoming not-localgenerated-flagged CWs which differ from the first CW<br />
= 0 (default)<br />
<br />
<br />
==== cacheex_nopushafter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
don't forward CWs from local/proxy-reader via CacheEx, if the defined time_in_ms for the CAID is reached<br /><br />
here in oscam.conf this setting is for evaluating the response-time for local/proxy-readers and is used for CacheEx2-reader/CacheEx3-user as default, when no reader/user cacheex_nopushafter is set.<br />
<br />
cacheex_nopushafter = CAID:time_in_ms[,n]<br />
<br />
<br />
==== cacheex_lg_only_remote_settings ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
possibility to deny cacheex-receiver/client(cx2: user / cx3: reader) to overwrite the following settings @ cacheex-sending-instance<br />
cacheex_localgenerated_only<br />
cacheex_lg_only_tab<br />
<br />
it makes sense if you want to force your local settings.<br />
if the user/reader isnt allowed to overwrite your values, <br />
* it is still possible for the cacheex-receiver to set cacheex_localgenerated_only=1, if the user/reader define cacheex_localgenerated_only_in=1 ; but it is only @ cacheex-sending-instance possible to disable it<br />
* it is still possible for the cacheex-receiver to add cacheex_lg_only_tab, if the user/reader define cacheex_lg_only_in_tab=1234,1337 ; but it is only merged to the sender-instance cacheex_lg_only_tab values<br />
<br />
if cacheex_lg_only_remote_settings @oscam.conf is enabled, the user/reader-settings are ignored.<br />
if cacheex_lg_only_remote_settings @oscam.conf is disabled, the user/reader-settings are used.<br />
<br />
cacheex_lg_only_remote_settings = 0|1 (default: 0 /opt-out)<br />
<br />
<br />
==== cacheex_localgenerated_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are flagged as localgenerated<br /><br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized <br />
<br />
cacheex_localgenerated_only = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_lg_only_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are lg-flagged for these list of caid/provid(s)<br /><br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
<br />
==== cacheex_localgenerated_only_in ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
drop incoming CWs which are NOT flagged as localgenerated<br /><br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized<br />
<br />
cacheex_localgenerated_only_in = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_lg_only_in_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
allow incoming CWs only if they are lg-flagged for these list of caid/provid(s)<br /><br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_in_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
<br />
==== cacheex_lg_only_in_aio_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
use drop lg-only settings (cacheex_localgenerated_only_in & cacheex_lg_only_in_tab) only if peer is detected as cx-aio-patched or svn >= 11588<br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized<br />
<br />
cacheex_lg_only_in_aio_only = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_ecm_filter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
set a global cacheex_ecm_filter<br /><br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized<br />
<br />
cacheex_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
<br />
<br />
==== cacheex_ecm_filter_aio ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
set a global cacheex_ecm_filter which is used if peer is detected as cx-aio-patched or svn >= 11588<br />
the default limit of 15/30 (camd3/cccam) filters is obsolete<br />
<br />
here in oscam.conf, the default value is set; user/reader-settings(cacheex_ecm_filter) are prioritized<br />
<br />
cacheex_ecm_filter_aio = [caid][&mask][@provid][$servid],n<br />
<br />
<br />
==== cacheex_push_lg_groups ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
push all lg-flagged CWs to this/these group/s, without checking the groupmembership of the peer<br />
<br />
cacheex_push_lg_groups = [blank] (default)<br />
= 1[,n]<br />
<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
<br/><br />
<br />
=== csp (UDP) ===<br />
Section only needed if using cache exchange<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:02/16/2013 look at '''[cache]'''!</span><br />
<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6124:12/23/2011</span><br />
<br />
UDP listen port for incoming traffic from csp nodes<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
==== serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6124:12/23/2011</span><br />
<br />
Local bind IP of the above udp port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
=== Camd 33 (TCP) ===<br />
Section required only if camd33 will be used as client protocol!<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for camd 3.3x clients, 0 = disabled, default:0<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # listenig to all<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured camd 3.3x client connection<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
Example:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt = [none]<br />
<br />
==== passive ====<br />
{{Optional/en}}<br />
<br />
force passive camd 3.3x client<br />
<br />
Camd3.3x protocol generally has aktive clients. In certain circumstances the client must switched on only "passive" mode.<br />
<br />
Example:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
==== key ====<br />
{{Optional/en}}<br />
128 bit key<br />
<br />
key for camd 3.3x client encryption<br />
<br />
<br />
Example:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key = # (blank] none (default)<br />
<br />
=== cs357x (UDP) ===<br />
Section required only if cs357x will be used as client protocol! These protocols principle encrypt and build the key from user name.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''cs357x''' was also known as '''camd35''' designated. Both terms mean the same protocol with the same functions and parameters. In the future, to avoid confusion '''only cs357x''' is used.<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
UDP port for camd 3.5x|cs357x clients. Port must be opened at router!<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35|cs3.57x-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== cs378x (TCP) ===<br />
Section required only if cs378x (camd 3.5x in TCP) will be used as client protocol!<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
Port(s) TCP for Cs378x clients (camd 3.5x in TCP mode). Port(s) must be opened at router!<br />
<br />
port@CAID[:ident][,ident]...[;port@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@0500:030B00;22764@0648<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell cs3.78x clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disable<br />
<br />
<br />
Mor here: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== Newcamd (TCP) ===<br />
Section required only if newcamd will be used as client protocol!<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
==== key ====<br />
{{required}}<br />
DES key<br />
Default key for newcamd client encryption.<br />
<br />
Example:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
==== port ====<br />
{{required}}<br />
TCP port/DES key/CAID/ident definitions. Each CAID requires a separate port. If you don't specify a DES key for a port, the default DES Key will be used!<br />
<br />
port[{DES key}]@CAID[:ident][,ident]...[;port[{DES key}]@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@1234:000000 # (CAID 1234 connected with port 15000)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 connected with port 15000. CAID 5678 with port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = [blank]<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
!! Dyn DNS Addresses are not forseen here and won't work !!<br />
<br />
Example:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed = [blank]<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<br />
Example:<br />
keepalive = 1 # (enabled)<br />
keepalive = 0 # (disabled)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
==== mgclient ====<br />
{{Optional/en}}<br />
<br />
Enable mgcamd extended newcamd protocol, allowing for a single connection to work with mutliple providers, default:0<br />
<br />
Example:<br />
mgclient = 1 # (enabled)<br />
mgclient = 0 # (disabled)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br/><br />
<br/><br />
=== '''scam''' ===<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9878:09/29/2014</span><br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port = port<br />
<br />
UDP port for scam server, default = 0<br />
<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br/><br />
<br/><br />
<br />
=== Radegast ===<br />
Section required only if radegast will be used as client protocol!<br />
<br />
{{OSCamConfRadegastParameter}}<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for radegast clients (enables radegast)<br />
port =<br />
= 0 (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br />
==== user ====<br />
{{required}}<br />
<br />
user name for radegast client<br />
user = username<br />
<br />
=== Serial ===<br />
Section required only if seral interface will be used!<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
==== device ====<br />
{{Optional/en}}<br />
<br />
Parameter of device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = name of Serial Device<br />
option = timeout = milli seconds timeout for connection default: 50<br />
= delay milli seconds additive between 2 characters<br />
<br />
supported serial devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
=== Cccam (TCP) ===<br />
Section required only if Cccam will be used as client protocol!<br />
{{OSCamConfCccamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6206:01/07/2012</span><br />
<br />
Port = 0|port[,port...]<br />
<br />
TCP/IP-Ports for CCcam clients, enables Cccam protocol!<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled (default)<br />
<br />
==== version ====<br />
{{Optional/en}}<br />
<br />
<br />
define CCcam version, minimum CCcam version 2.0.11, used with original CCcam only, default:none<br />
<br />
<nowiki><main version>,<version>,<sub version></nowiki><br />
<br />
Example:<br />
version = 2.0.11<br />
<br />
==== reshare ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
reshare level for CCcam clients:<br />
-1 = no resharing<br />
0 = resharing for direct peer only<br />
1 = resharing for direct peer and next level<br />
x = resharing for direct peer and next x level (x for number of level)<br />
10 = (default)<br />
<br />
Example:<br />
reshare = 1 resharing only for direct peer and next level<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
==== reshare_mode ====<br />
{{Optional/en}}<br />
<br />
CCcam reshare mode<br />
0 = reader reshares only received SCs for CCcam readers,<br />
defined filters/CAIDs/idents on other readers (default)<br />
1 = reader reshares received SCs (like=0) and defined services<br />
2 = reader reshares only defined reader services as virtual SCs<br />
3 = reader reshares only defined user services as virtual SCs<br />
4 = reader reshares only received cards<br />
<br />
Every server is shared as hop=0 and with defined reshare values.<br />
<br />
Service reshare only works if positive services defined: no service - no reshare!<br />
<br />
==== ignorereshare ====<br />
{{Optional/en}}<br />
<br />
<br />
CCcam reshare setting:<br />
0 = use reshare setting of server (default)<br />
1 = use reshare setting of reader or user<br />
<br />
Example:<br />
ignorereshare = 1 reshare settings of reader or user are used<br />
<br />
==== stealth ====<br />
{{Optional/en}}<br />
<br />
Behaviour like the original CCcam: no activate partner detection and extended OSCam-CCcam protocol, prevent other OSCam to detect the server as OSCam server.<br />
<br />
stealth = 1 # stealth enabled<br />
= 0 # stealth disabled (default)<br />
<br />
==== minimizecards ====<br />
{{Optional/en}}<br />
<br />
mode how to provide CCcam servers to CCcam clients:<br />
0 = no aggregation, remove duplicates only (default)<br />
1 = based on minimum hop: two SCs with different hops are summarized, new SCs get a smaller hop<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional/en}}<br />
<br />
<br />
interval to provide share list update to CCcam clients in seconds<br />
0 = update based on server updates, values <= 10 are invalid and will be set to 30 <br />
= [blank] 240 (default)<br />
<br />
==== keepconnected ====<br />
{{Optional/en}}<br />
<br />
set CCcam keepalive modus:<br />
0 = disconnect client when max idle time is reached<br />
1 = keep client connected (default)<br />
<br />
==== recv_timeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7672:10/09/2012</span><br />
<br />
recv_timeout = milli-seconds<br />
<br />
set network timeout for receiving data<br />
default = 2000<br />
<br />
==== forward_origin_card ====<br />
{{Optional/en}}<br />
<br />
forward_origin_card = 0|1<br />
<br />
1 = forward ECM request to reader holding this card, loadbalancer, fallback and caching will be disabled <br />
0 = default<br />
<br />
==== nodeid ====<br />
{{Optional/en}}<br />
<br />
nodeid = ID<br />
<br />
set CCcam node ID in hex, default:none<br />
<br />
example<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br/><br />
=== Pandora ===<br />
{{OSCamConfPandoraParameter}}<br />
<br />
==== pand_skip_send_dw ====<br />
<br />
<br />
pand_skip_send_dw = dummy<br />
<br />
<br />
==== pand_allowed ====<br />
<br />
<br />
pand_aloowed = dummy<br />
<br />
<br />
==== pand_usr ====<br />
<br />
<br />
pand_user = dummy<br />
<br />
<br />
==== pand_pass ====<br />
<br />
<br />
pand_pass = dummy<br />
<br />
<br />
==== pand_ecm ====<br />
<br />
<br />
pand_ecm = dummy<br />
<br />
<br />
==== pand_port ====<br />
<br />
<br />
pand_port = dummy<br />
<br />
<br />
==== pand_srvid ====<br />
<br />
pand_srvid = dummy<br />
<br />
<br/><br />
<br/><br />
<br />
=== GBox ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
{{OScamConfGboxParameter}}<br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 {3 3}}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== hostname ====<br />
{{required}}<br />
<br />
hostname = my IP or ddns<br />
<br />
examples:<br />
hostname = 192.168.1.120<br />
hostname = willy.noip.org<br />
<br />
<br/><br />
<br />
==== my_password ====<br />
{{required}}<br />
<br />
my_password = 4 hex bytes, 8 chara<br />
<br />
example:<br />
my_password = 98AF3E25<br />
<br />
<br/><br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port= define incoming UDP port(s) used by Gbox protocol<br />
<br />
port= port#1[[,port#2]...[,port#32]]<br />
<br />
Maximum 32 ports.<br />
<br />
<br/><br />
<br />
==== proxy_card ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy reader card(s) to be reshared into gbox network, default = none<br />
<br />
proxy_card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
example:<br />
<br />
proxy_card = 18300000,0D950400,05050F00 <br />
<br />
<br/><br />
<br />
==== ccc_reshare ====<br />
{{Optional/en}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = enable cccam-cards to be reshared into gbox network, default = 0 (global setting)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' peer specific reshare level to be set in oscam.server [reader] -> cccam_reshare<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' peer specific ident filter can be set in oscam.server [reader] -> ccc_gbx_reshare_ident<br />
<br />
<br/><br />
<br />
==== my_vers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9645:04/09/2014</span><br />
<br />
<br />
my_vers = version<br />
<br />
set gbox version hexadecimal low byte<br />
<br />
default = 2A<br />
<br />
<br/><br />
<br />
==== my_cpu_api ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9712:05/11/2014</span><br />
<br />
<br />
my-cpu_api = byte<br />
<br />
set gbox CPU and API byte in hexadecimal, default = 61<br />
<br />
<br/><br />
<br />
==== gbox_reconnect ====<br />
{{Optional/en}}<br />
<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min:60, max:300<br />
<br />
<br/><br />
<br />
==== accept_remm_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11399:29/01/2018</span><br />
<br />
Accept to send Remote EMMs to specified Server Peer-IDs<br />
<br />
accept_remm_peer = peer#1[[,peer#2]...[,peer#8]]<br />
<br />
<br/><br />
<br />
==== dis_attack_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11360:16/02/2017</span><br />
<br />
Disable creation of attack.txt<br />
<br />
dis_attack_txt = 0|1 - default: 0 <br />
<br />
<br/><br />
<br />
==== log_hello ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11231:20/04/2016</span><br />
<br />
Display hello messages in debug log<br />
<br />
log_hello = 0|1 - default: 1 <br />
<br />
<br/><br />
<br />
==== ignore_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Ignore specific peer ID(s).<br />
<br />
ignore_peer = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
If peer = dist 1 -> Login of peer rejected<br />
If peer > dist 1 -> card(s) of peer ignored<br />
<br />
<br/><br />
<br />
==== block_ecm ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Block ECM for specific peer ID(s).<br />
<br />
block_ecm = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== tmp_dir ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/2014</span><br />
<br />
gbox tempory directory<br />
<br />
tmp_dir = /path/to/dir <br />
<br />
default: /tmp/.oscam<br />
<br />
<br/><br />
<br />
==== gsms_disable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9714:05/11/2014</span><br />
<br />
<br />
gsms_disable = 0|1<br />
<br />
0 - Gbox Short Message Service (GSMS) is enabled<br/><br />
1 - disable gbox short message service (GSMS)<br/><br />
<br />
default = 1<br />
<br />
<br/><br />
<br/><br />
<br />
==== gbox_save_gsms ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_save_gsms=0|1<br />
<br />
0 = don't save GSMS in configuration<br/><br />
1 = save all GSMS field in configuration<br />
<br />
You need to press save button to really save it!<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_type=0|1<br />
<br />
0 = normal text message<br/><br />
1 = normal text message + OSD (On Screen Display)<br />
<br/><br />
<br/><br />
<br />
==== gbox_dest_peers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_dest_peers = [BOXID[,BOXID]...[,BOXID]]<br />
<br />
Maximum 16 * 2 bytes (4 hexa digits), comma-separated. For broadcast to all use FFFF.<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_txt=Your text to send to peers.<br />
<br />
From 6 to 127 alphanumerical characters.<br />
<br/><br />
<br/><br />
<br />
=== DVBapi ===<br />
{{Optional/en}}<br />
<br />
Section required only if OSCam will also be used as client!<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional/en}}<br />
<br />
DVB API enabled<br />
<br />
Example:<br />
enabled = 0 # disabled (default)<br />
enabled = 1 # enabled<br />
<br />
==== user ====<br />
{{required}}<br />
user name for DVB API client<br />
Example:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
==== au ====<br />
{{Optional/en}}<br />
<br />
AU mode for dvbapi:<br />
au = 0 # disable AU (default)<br />
au = 1 # enable AU<br />
<br />
==== pmt_mode ====<br />
{{Optional/en}}<br />
PMT mode:<br />
pmt_mode = 0 # use camd.socket and PMT file (default)<br />
pmt_mode = 1 # disable reading PMT file<br />
pmt_mode = 2 # disable camd.socket<br />
pmt_mode = 3 # read PMT file on startup only<br />
pmt_mode = 4 # do not use signal handler for monitoring /tmp<br />
pmt_mode = 5 # do not use signal handler to monitor /tmp & disable camd.socket<br />
pmt_mode = 6 # use PMT server mode <span style="background-color:Green;color:White;padding:0 5px;">NEU - NEW - NOUVEAU - NUOVO svn8680:05/06/2013</span><br />
<br />
==== request_mode ====<br />
{{Optional/en}}<br />
CAID request mode:<br />
0 = try all possible CAIDs one by one (default)<br />
1 = try all CAIDs simultaneously<br />
<br />
==== listen_port ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP/IP port for SAT IP clients, filtering has to be done on client site<br />
<br />
0 = disabled (default)<br />
<br />
==== boxtype ====<br />
{{required}}<br />
set boxtype, auto detection of DVB API will be aspired:<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt|qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
ipbox with camd.socket support, currently only with PGI image version 0.6 or above, verified on HD models only<br />
<br />
ipbox-pmt can be used on any DGS based images (with or without camd.socket support), verified on HD models only<br />
<br />
pc is for generic pc support (currently supported on VDR with vdr-plugin-dvbapi)<br />
<br />
==== cw_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
cw_delay = milli-seconds<br />
<br />
delay of CW writing, default = none<br />
<br />
==== delayer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6808:05/14/2012</span><br />
<br />
delayer = milli-seconds<br />
<br />
minimum time to write CW<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
= 1 reopen demux devices in each channel switching,<br />
= 0 default<br />
<br />
==== decodeforever ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = trying to decode on all CAIDs<br />
0 = default<br />
<br />
==== ecminfo_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10722:06/13/15</span><br />
<br />
Define the type of ecm.info file to create, ecminfo_type = 0|1|2|3|4|5<br />
<br />
0 = default oscam syntax<br />
1 = default oscam syntax with ecmtime in ms instead of s<br />
2 = wicardd<br />
3 = mgcamd<br />
4 = cccam<br />
5 = camd3<br />
<br />
==== read_sdt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10766:06/15/15</span><br />
<br />
If it is not yet available, this option automatically add entries in your oscam.srvid2 (or oscam.srvid) and in your oscam.provid files. You need to stay '''more than 30 seconds''' on a channel for the auto-detect to start. So both channel name and provider name are retrieved. If entries already exist they are not changed nor updated, so you keep full control on the content of both files, only missing entries are added.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = disabled (default)<br />
1 = on, do not save FTA channels<br />
2 = on, save FTA channels<br />
<br />
==== write_sdt_prov ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10841:06/27/15</span><br />
<br />
First enable the read_sdt parameter then you can specify if the provider name is saved or not into the oscam.srvid2 or oscam.srvid file. This is not mandatory since the provider name is now retrieved automatically from the oscam.provid file.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = off, do not write provider name into oscam.srvid/2 (default)<br />
1 = on, write provider name into oscam.srvid/2<br />
<br />
=== Anticasc ===<br />
Section is needed if anticascading will be used to protect against unauthorized forwarding CardSharing. <br />
{{OSCamConfAnticascParameter}}<br />
<br />
==== enabled ====<br />
{{required}}<br />
<br />
enabled anti-cascading:<br />
enabled = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== numusers ====<br />
{{Optional/en}}<br />
anti-cascading: user per account (number)<br />
numusers = 0 # anticascading disabled (default)<br />
= 1 # cascading for 1 user allowed ==> (1*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 11 ecms allowed per minute<br />
= 2 # cascading for 2 users allowed ==> (2*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 17 ecms allowed per minute <br><br />
<span style="color:Blue;padding:0;5px"><B>10</B></span> = number you have put in oscam.ac. Default value is 10<br />
<br />
==== sampletime ====<br />
{{Optional/en}}<br />
duration of sample in minutes:<br />
sampletime = 5 # duration 5 minutes<br />
= # [blank] duration 2 minutes (default)<br />
<br />
Ex: numusers = 1 ==> 11 ecms * 5 minutes ==> 55 ecms allowed in 5 minutes <br />
numusers = 2 ==> 17 ecms * 5 minutes ==> 85 ecms allowed in 5 minutes<br />
<br />
==== samples ====<br />
{{Optional/en}}<br />
<br />
number of additionnal ecms allowed (possible values between 2 and 10)<br />
samples = 7 # 7 additional ecms allowed<br />
= # [blank] 10 additional ecms allowed (default)<br />
<br />
==== penalty ====<br />
{{Optional/en}}<br />
Level of the penalty if the user exceeds the result shown in Ex on Sampletime<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay ([[OSCam/en/Config/oscam.conf#fakedelay|fakedelay]])<br />
<br />
penalty can be overwritten per user in oscam.user<br />
<br />
==== aclogfile ====<br />
{{Optional/en}}<br />
file for anti-cascading logging<br />
aclogfile =<br />
= # [blank] no logfile (default)<br />
<br />
==== fakedelay ====<br />
{{Optional/en}}<br />
<br />
fake delay time in milli seconds (possible values between 100 and 3000)<br />
fakedelay = 500 # delay 500 milli seconds<br />
= # [blank] 1000 milli seconds (default)<br />
<br />
==== denysamples ====<br />
{{Optional/en}}<br />
<br />
How many samples should be penalized?<br />
denysamples = 10 # 10 samples will be penalized<br />
= # [blank] 8 Samples will penalized (default)<br />
<br/><br />
<br />
==== acosc_enabled ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br/><br />
acosc_enabled = 0|1<br />
1 = enable anticascading oder SIDs count<br />
0 = default<br />
<br/><br />
==== acosc_max_active_sids ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = count<br />
<br />
maximum activ SIDs with anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br />
<br/><br />
<br />
==== acosc_zap_limit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = count<br />
<br />
zap limit for anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
level of penalty with anticascading over SIDs count:<br />
<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = seconds<br />
<br />
penalty duration for anticascading over SIDs count:<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
==== acosc_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_delay = milliseconds<br />
<br />
delay for anticascading over SIDs count<br />
<br />
0 = unlimites (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
<br />
<br />
<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.conf&diff=13570
OSCam/en/Config/oscam.conf
2021-03-02T13:13:01Z
<p>Felixka: /* GBox */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
==oscam.conf==<br />
<br />
=== The [global] section ===<br />
<br />
The main configuration file for OSCam contains global parameters such as debugging, logging, monitor, protocols and anti-cascading. Sections in oscam.conf are nonrecurring. The [global] section is required. All other sections are optional.<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If a parameter is empty or is not listed in config-file, then apply the default values !<br />
<br />
==== nice ====<br />
{{Optional/en}}<br />
<br />
'''Systempriority'''<br />
<br />
OSCam requires almost no CPU-power. But if CPU-power is required, it should be available immediatly. Values between 20 and -20 are possible. 20 = low, -20 = very high. If this parameter is commented out (#), this function is not called. Important for example for dbox2[http://de.wikipedia.org/wiki/DBOX2], if the error messages "''relocation error:setpriority''". See [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Example:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
===== initial_debuglevel =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10705:06/11/15</span><br />
<br />
Set the debuglevel on startup.<br />
<br />
Example:<br />
initial_debuglevel = 8<br />
<br />
Default:<br />
initial_debuglevel = 0<br />
<br />
===== pidfile =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8176/01/24/2013</span><br />
<br />
pidfile = set pidfile, [blank] none (default)<br />
<br />
Change PID file name an path. If default = oscam.pid in /tmp<br />
<br />
Example:<br />
pidfile = /var/run/oscam.pid<br />
<br />
===== logfile =====<br />
{{optional/en}}<br />
<br />
Logging target<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
You can define a maximum of one filename (not more!) and additionally to log to stdout or syslog (you can also only log to stdout or syslog and omit the filename).<br />
<br />
Opportunities:<br />
<br />
logfile = /var/log/oscam.log # file or linux device (for example /dev/tty)<br />
logfile = syslog # log to syslogd <br />
logfile = stdout # showing the log on the console<br />
<br />
Example:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format logfile:<br />
CAID&ident/provider/length:checksum<br />
<br />
===== ecmfmt =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
define ECM log format, default:c&p/i/s/l:h <br />
<br />
possible variables: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and CCcam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , this ID will be replaced with the tier-description from oscam.tiers (if found)<br />
w = CW<br />
y = payload (short, 3 bytes)<br />
Y = payload (long, 6 bytes)<br />
<br />
<br />
use a value as prefix to hide variable with this value, control characters will be escaped by "\" <br />
<br />
example:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w HOP:j<br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn10048:11/30/2014</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs will be dropped, if CWs do not have an odd an even sample (default)<br />
1 = disabled<br />
<br />
===== loghistorysize =====<br />
{{optional/en}}<br />
<br />
loghistorysize = bytes<br />
<br />
size of log message history in web interface or monitor<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) #stage 2 is used only if '''preferlocalcards = 1''' was activated in [global] section. <br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
example<br />
<br />
P/2/2/2 or L/2/4/4<br />
<br />
===== maxlogsize =====<br />
{{required}}<br />
<br />
Here the maximum size of logfiles are set in KBytes. This is especially important for server with only a small amount of memory (dbox2). Therefore it is strongly recomended to determine carefully that size at such servers. Not infrequently a system "bursting" because the logfile uncontrolled large scale adopted!<br />
<br />
Example<br />
maxlogsize = 20 # Logfile reaches to 20 KBytes<br />
= 0 # Logfile '''unlimited'''<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile reaches to 10 KBytes (default)<br />
<br />
===== logduplicatelines =====<br />
{{optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8290/02/05/2013</span><br />
<br />
logduplicatelines = 0|1<br />
<br />
1 = disable detection of duplicate lines in log file<br />
0 = enable detection of duplicate lines in logfile = default<br />
<br />
===== disablelog =====<br />
{{optional/en}}<br />
<br />
switches logfile '''off'''<br />
1 = '''no log''' <br />
0 = '''log''' <br />
<br />
Example:<br />
disablelog = 1 # '''no''' log <br />
<br />
Default:<br />
disablelog = 0 # '''log'''<br />
<br />
===== cwlogdir =====<br />
{{Optional/en}}<br />
<br />
<br />
A path for cw logging can be configured here. The path is relative to the work directory and must exist. Otherwise no logs are created and no errors are reported. <br />
<br />
CWs (control words) are the answers of the card which decrypts a certain channel for some seconds before the next cw is transmitted. The CW log file can be used for delayed decoding of this channel. This is also called offline decoding. Watch this [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
Oscam creates a new *.cwl file for each channel and each day. The file name contains the date, service ID and service name, e.g. 110808_I000B_Sky_Cinema_+1.cwl with this contents:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
All cws are logged if at least one user watches the channel. Please choose a path with enough space, since per day and channel some 10KB of data are created. A script that moves/deletes the log files regularly is recommended.<br />
<br />
Example:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] no path for cw-log, logging disabled<br />
<br />
===== emmlogdir =====<br />
{{Optional/en}}<br />
<br />
Setting a path for emm-log. You can define with the "saveemm-*"-Parameters in oscam.server which EMMs should be logged.<br />
<br />
Example:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] the config folder will be used for emm logging<br />
<br />
===== usrfile =====<br />
{{Optional/en}}<br />
<br />
Set a name für userfile<br />
<br />
Format of the userfile: <br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Example:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
===== disableuserfile =====<br />
{{Optional/en}}<br />
<br />
Now it is crazy: Even if a logfile is switched on (see logfile), the userfile can be turned off!<br />
<br />
Example:<br />
disableuserfile = 1 # '''no''' userfile <br />
= 0 # '''userfile'''<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
===== usrfileflag =====<br />
{{Optional/en}}<br />
<br />
Setting the logging-modus<br />
0 = Only login and logout will be logged<br />
1 = Each zapping from client will be logged<br />
Default is 0<br />
<br />
Example:<br />
usrfileflag = 1 # All will be logged<br />
<br />
Default:<br />
usrfileflag = 0 # Only login und logout will be logged<br />
<br />
===== saveinithistory =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn7128:07/02/2012</span><br />
<br />
Save SC init history to /tmp/.oscam/reader<number>. Needed to show entitlements.<br />
<br />
Example:<br />
saveinithistory = 1 # save to /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # no save<br />
<br />
===== mailfile =====<br />
{{Optional/en}}<br />
<br />
mailfile = file<br />
<br />
define file saving NDS Videogard mail messages from provider. Default: [blank] none<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
delay in millisencons for asking cache exchange mode 1 readers, default: none<br />
<br />
===== disablemail =====<br />
{{Optional/en}}<br />
<br />
disablemail = 0|1<br />
<br />
disable saving NDS Videogard mail messages form provider. Default = 1 (disabled)<br />
<br />
===== sysloghost =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set remote syslog server will be activated. Messages will be sent to this IPv4 address. If not set remote syslog server not work.<br />
<br />
Example:<br />
sysloghost = 192.168.1.167<br />
<br />
===== syslogport =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set ''sysloghost'' remote syslog server will be activated. Messages will be sent to this port. If not set port 514 is used as default. <br />
<br />
Example:<br />
syslogport = 515<br />
<br />
Default:<br />
syslogport = 514<br />
<br />
==== Reader ====<br />
<br />
===== enableled =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
===== serialreadertimeout =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8541:03/13/2013</span><br />
<br />
'''Only using Serialreader!'''<br />
<br />
timeout for serial reader in milli-seconds<br />
<br />
Example:<br />
serialreadertimeout = 1200 # Timeout after 1200 milli-seconds<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout after 1500 milli-seconds<br />
<br />
===== waitforcards =====<br />
{{Optional/en}}<br />
<br />
wait for local SCs on startup before opening network ports<br />
<br />
Example:<br />
waitforcards = 0 # don't wait<br />
<br />
Default:<br />
waitforcards = 1 # wait<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional/en}}<br />
<br />
waitforcards_extra_delay = milli seconds<br />
<br />
additional delay in milli seconds after waiting for local SCs on startup before opening nework ports<br />
<br />
default = 500<br />
<br />
===== preferlocalcards =====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn9605:03/29/2014</span><br />
<br />
try decoding on local cards first<br />
<br />
Example:<br />
preferlocalcards = 0 # local cards are used like remote reader<br />
preferlocalcards = 1 # prefer CacheEx sources <br />
preferlocalcards = 2 # prefer local cards<br />
<br />
Default:<br />
preferlocalcards = 1 # prefer CacheEx sources<br />
<br />
===== readerrestartseconds =====<br />
{{Optional/en}}<br />
<br />
waiting time in seconds beetween restarts<br />
<br />
Example:<br />
readerrestartseconds = 10 # waiting time 10 seconds<br />
= 0 # '''no restarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # waiting time 5 seconds<br />
<br />
===== block_same_ip =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_ip = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same ip address, default = 1<br />
0 = no reject<br />
<br />
===== block_same_name =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_name = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same name, default = 1<br />
0 = no reject<br />
<br />
==== Cache ====<br />
<br />
===== cachedelay =====<br />
{{optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
===== max_cache_time =====<br />
<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
===== max_cache_count =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = count, default 1000<br />
<br />
maximum CWs in cache<br />
<br />
===== cacheexwaittime =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
maximum wait time for a cache entry in milli seconds, default:50 <br />
<br />
===== cacheexenablestats =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== Client ====<br />
<br />
===== clienttimeout =====<br />
{{Optional/en}}<br />
<br />
value in milli-seconds for client process to wait for key<br />
<br />
Examples:<br />
clienttimeout = 10000 # after 10 seconds timeout<br />
clienttimeout = 10 # timeout after 10 milli-seconds! (see Tip below)<br />
clienttimeout = 8 # timeout after 8000 milli-seconds (= 8 seconds), see Tip below<br />
Default:<br />
clienttimeout = 5000 # timeout after 5000 milli-seconds (=5 seconds)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Values < 10 (so 1 to 9) are multiplicated with 1000, so a "5" results in 5000 ms.<br />
<br />
===== clientmaxidle =====<br />
{{Optional/en}}<br />
<br />
value for client process being idle before disconnect in seconds<br />
<br />
Example:<br />
clientmaxidle = 200 # Disconnect after 200 seconds<br />
= 0 # idle disconnect disabled<br />
<br />
Default:<br />
clientmaxidle = 120 # Disconnect after 120 seconds<br />
<br />
===== suppresscmd08 =====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35[cs3.57x]-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
==== fallbacktimeout ====<br />
{{Depends/en}}<br />
<br />
At several readers (see Chapter [reader] in oscam.server) one reader can be defined to them, for example in case of failure of the other readers, the traffic falls back.<br />
Maximum waiting time of the [[Cardserver]]s in milliseconds for primary [[Reader]], before [[Fallback]]-Reader (if any!) are questioned.<br />
<br />
Example:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The value must be greater than the value in "serialreadertimeout", otherwise the default is used.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = milliseconds <br />
<br />
time falling back to CAID restricted fallback reader, default: 2500<br />
<br />
<br />
<br />
==== sleep ====<br />
{{Optional/en}}<br />
<br />
time waiting for inactive users in minues, can be overwritten per user in oscam.user<br />
<br />
Example:<br />
sleep = 5 # waiting time 5 minutes<br />
<br />
Default:<br />
sleep = # [blank] no waiting time<br />
<br />
==== serverip ====<br />
{{optional/en}}<br />
<br />
Bind service to specified IP-address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam listen to all IP's<br />
<br />
==== bindwait ====<br />
{{Optional/en}}<br />
<br />
value in seconds to wait for bind request to complete. If OSCam within this time can not bind, he finished with "Bind Request failed".<br />
<br />
Causes may include:<br />
* Double assignment of ports<br />
* "crashed" OSCam has not released the ports again<br />
* OSCam was started serveral times while<br />
<br />
Example:<br />
bindwait = 20 # waiting time 20 seconds<br />
<br />
Default:<br />
bindwait = 120 # waiting time 120 seconds<br />
<br />
==== netprio ====<br />
{{Optional/en}}<br />
<br />
network priority - This sets the value of SO_PRIORITY on network connections. Basically this leads to setting the TOS fields of the sent IP packages so that QoS can be better used.<br />
<br />
Beispiel:<br />
netprio = 1 # Priority 1<br />
<br />
Default:<br />
netprio = 0 # system given<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional/en}}<br />
<br />
set mode for DNS resolving: These are different libc calls to resolve dns names and some older systems have problems with the newer implementation ''getadressinfo'' (getadressinfo is also threadsafe whereas ''gethostbyname'' is not and thus it has some locks around) or have stripped them from their images (dbox2 was such a candidate I think) even though it is available at compile time. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Example:<br />
resolvegethostbyname = 1 # gethostbyname<br />
<br />
Default:<br />
resolvegethostbyname = 0 # adressinfo system given<br />
<br />
==== failbantime ====<br />
{{Optional/en}}<br />
<br />
time for IP based blocking for clients with an invalid login attempt in minutes<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP will be blocked for 5 minutes. New logins are denied.<br />
# no clientthread will be created.<br />
<br />
Default:<br />
failbantime = 0 # failban off (default)<br />
<br />
==== failbancount ====<br />
{{Optional/en}}<br />
<br />
Failbancount = Number of allowed failed attempts with incorrect data <br />
= 0 (default) IP is now blocked on the first try with incorrect data!<br />
<br />
If within '''failbantime''' more than in '''failbancount''' allowed trials to be registered, the IP for the remainder failbantime is locked. After a period of failbantime are again full failbancount available. Failbancount is thus a relaxation of rules!<br />
<br />
==== dropdups ====<br />
{{Optional/en}}<br />
<br />
mode for duplicate client connections<br />
<br />
0 = mark client as duplicate, but don't disconnect them (default)<br />
1 = drop duplicate connections instead of marking as duplicate<br />
<br />
==== unlockparental ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7289:08/27/2012</span><br />
<br />
'''Only Seca and Viaccess'''<br />
<br />
unlock parental mode option to disable pin code request for adult movie.<br />
In order to work properly, this option may required that you define the card PIN code in your card reader configuration.<br />
<br />
Example:<br />
unlockparental = 1 # parental lock mode disabled<br />
<br />
Default:<br />
unlockparental = 0 # parental lock mode enabled<br />
<br />
==== double_check ====<br />
{{Optional/en}}<br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other, lb_nbest_readers must be set to 2 or higher<br />
<br />
Example:<br />
double_check = 1 # on<br />
<br />
Default:<br />
double_check = 0 # off<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|first two digits of CAID1],[CAID2|first two digits of CAID2]... <br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other for defined CAID or first two bytes of CAID, lb_nbest_readers must be set to 2 or higher, default:none <br />
<br />
<br />
<br />
==== Loadbalancer ====<br />
<br />
===== lb_mode =====<br />
{{Optional/en}}<br />
<br />
'''loadbalance mode'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If load balancing is activated here, it may in oscam.server among services and ident are '''no entries'''!<br />
<br />
If there are 2 or more of the same SC, the load can be distributed evenly on the cards. For more see [[OSCam/en/Loadbalancing|Loadbalancing]]<br />
<br />
Example:<br />
lb_mode = 0 loadbalance disabled, ECMs go to all readers<br />
lb_mode = 1 fastest reader first, after 5 ECMs the reader with the fastest response time will be selected<br />
lb_mode = 2 oldest reader first, reader with the longest no answer<br />
lb_mode = 3 lowest usage level, the usage level will be calculated by the sum of 5 ECMS response times, the higher a reader is busy, the higher is usage level<br />
lb_mode = 10 LB is switched off, but statistics are build<br />
<br />
<br />
Default:<br />
lb_mode = 0 # disabled<br />
<br />
===== lb_save =====<br />
{{Optional/en}}<br />
<br />
Save autoloadbalance statistics (counts). To save CPU power a minimum counts of 100 is recommended.<br />
<br />
Example:<br />
lb_save = 100 # counts of ECM's after statistics are saved<br />
<br />
Default:<br />
lb_save = 0 # no svae<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional/en}}<br />
<br />
set count of best readers for loadbalancing.<br />
<br />
Example:<br />
lb_nbest_readers = 2 # requests always go to two reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # requests go to one reader<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional/en}}<br />
<br />
set count of fallback readers for loadbalancing<br />
<br />
Example:<br />
lb_nfb_readers = 2 # two fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1 # one fallbackreader<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mode:<br />
= 0 # standard late reopening of blocker readers (default)<br />
= 1 # fast reopening of blocker readers<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5893:08/19/2011</span><br />
<br />
Set count of best readers per CAIDs for loadbalancing, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
<br />
lb_nbest_percaid = # number<br />
= [blank] # none (default)<br />
<br />
example: <br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wiil be blocked until statistics has been cleaned<br />
1 = default<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = force reopening immidiatly all failing readers if no matching was found<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional/en}}<br />
<br />
minimal ECM count to evaluate loadbalancing values<br />
<br />
Example:<br />
lb_min_ecmcount = 2 # 2 counts<br />
<br />
Default:<br />
lb_min_ecmcount = 5 # 5 counts<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional/en}}<br />
<br />
Maximum ECM count before resetting loadbalancing values.<br />
<br />
Example:<br />
lb_max_ecmcount = 200 # 200 counts<br />
<br />
Default:<br />
lb_max_ecmcount = 500 # 500 counts<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional/en}}<br />
<br />
time in seconds between retrying failed readers/CAIDs/providers/services<br />
<br />
Example:<br />
lb_reopen_seconds = 500 # retry after 500 seconds<br />
<br />
Default:<br />
lb_reopen_seconds = 900 # retry after 900 seconds<br />
<br />
===== lb_retrylimit =====<br />
{{Optional/en}}<br />
<br />
Retry next readers '''only''' if response time is higher then lb_retrylimit in '''milli seconds'''.<br />
<br />
Example:<br />
lb_retrylimit = 500 # retry next reader only, if response time is higher than 500 ms<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
===== lb_savepath ===== <br />
{{Optional/en}}<br />
<br />
Filenanme for saving loadbalancing statistics<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional/en}}<br />
<br />
hours after the loadbalancing statistics will be deleted<br />
<br />
default = 336<br />
<br />
===== lb_use_locking =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6166:12/28/2011</span><br />
<br />
disable parallel and identical ECM requests<br />
<br />
<br />
1 = on<br />
0 = off # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* You should choose this option only if:<br />
** slow system<br />
** high load<br />
** the same ECM requests come not from the cache, but will continue to the confirmed reader.<br />
<br />
* Adventages, if activated:<br />
** By synchronizing, an ECM request made by one. The identification of cache or request and assignment of the reader by loadbalancer is always successful.<br />
<br />
* Disadventages, if activated:<br />
** The synchronisation prevents multithreading and the probability of higher response times.<br />
<br />
* Adventages, if NOT activated:<br />
** Faster transit times for ECM requests<br />
<br />
* Disadventages, if NOT activated:<br />
** May have dual (n-fold) possible requests to the readers.<br />
<br/><br />
<br />
===== lb_retrylimits =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn:5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,Caid2:time2]...<br />
<br />
loadbalancing retry limit time per CAID in milliseconds, wilcard CAIDs with 2-digit Caids possible<br />
<br />
default = none<br />
<br />
example: <br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
ignore provider information CAIDs to reduce statistic date, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
example: <br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
default = none<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # enable automatic timeout based on load balancing statistics<br />
= 0 # default<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = percent<br />
<br />
percent added to average time as timeout time<br />
default = 30<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = milli seconds<br />
<br />
minimal time added to average time as timeout time<br />
default = 300<br />
<br />
===== lb_max_readers =====<br />
{{Optional/en}}<br />
<br />
lb_max_readers = limit (number)<br />
<br />
restrict the reader count to limit during learning<br />
<br />
0 = unlimited (default)<br />
x = restrict loadbalancer readers to limit x (number)<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional/en}}<br />
<br />
lb_auto_betatunnel = 0|1<br />
<br />
enable automatic Betacrypt tunneling for CAIDs 1801, 1833, 1834 and 1835 in loadbalancing mode<br />
lb_auto_betatunnel = 0 # disabled<br />
= 1 # enabled (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Betacrypt definition in oscam.user with betatunnel will be prefered [[streamboard:wiki/OSCam/en/Config/oscam.user#betatunnel|User-Betatunnel]]!<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
set mode for automatic Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only) <br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = number<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = always Betacrypt<br />
105 = represents the middle<br />
200 = always Nagravision<br />
<br />
=== Monitor ===<br />
'''Only if monitor is used!'''<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
==== port ====<br />
{{Optional/en}}<br />
UDP port for monitor<br />
port = 0 # monitor disabled<br />
= # port number<br />
<br />
Beispiel:<br />
port = 24480 # monitor on, port = 24480<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
serverip = # IP adress<br />
= # [blank] all IP's (default)<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured monitor connection<br />
[,IP address|IP address range]...<br />
<br />
Possible<br />
* one or more IP adresses<br />
* one or more IP adress ranges<br />
* mixture of IP adresses and IP adress ranges<br />
<br />
Example<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 and IP range 192.168.0.0 to 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] no secured monitor connection<br />
<br />
==== aulow ====<br />
{{Optional/en}}<br />
<br />
time no EMM occurs so that client is set to low in minutes<br />
<br />
Example<br />
aulow = 30 # After 30 minutes whithout EMM client will be switched from "active" to "on" (default).<br />
<br />
==== monlevel ====<br />
{{Optional/en}}<br />
<br />
monitor-level<br />
0 = no access to monitor (default)<br />
1 = only server and own procs<br />
2 = all procs, but viewing only<br />
3 = all procs, reload of oscam.user possible<br />
4 = complete access<br />
<br />
Example<br />
monlevel = 4 # complete access<br />
<br />
monlevel can be overwritten per user in oscam.user!<br />
<br />
==== appendchaninfo ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8546:03/13/2013<br />
</span><br />
<br />
Append channel name on log messages. Very useful when using [webif]!<br />
appendchaninfo = 1 # append chanel name<br />
= 0 # no append chanel name (default)<br />
<br />
=== lcd ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
==== lcd_outputpath ====<br />
{{Optional/en}}<br />
<br />
Path for LCD output<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
==== lcd_hideidle ====<br />
{{Optional/en}}<br />
<br />
hide reader in LCD output if reader idle > 20 seconds, default:0 <br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional/en}}<br />
<br />
LCD refresh interval (minimum 5), default:10<br />
<br />
=== WebIf ===<br />
'''Only if WebIf is used!'''<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
==== File format to send EMMs via the webinterface ====<br />
(by Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention'''<br />
<br />
* File has to be in TXT format.<br />
* The EMM-file should contain each PRE-CAM EMM in a new line.<br />
* EMMs should be in HEX representation.<br />
** Example: AABBCCDD...<br />
*Spaces and tabs between the bytes are allowed:<br />
**AA BB CC DD...<br />
*The HEX representation of each EMM's byte can be represented by upper or lower case - even mixed is allowed:<br />
**AA aa Aa aA...<br />
*Other chars and comments are not allowed.<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
<br />
default is 8888 if no httpport is set<br />
port for web interface,<br />
0 = disabled, praefix + = enable SSL<br />
<br />
Example<br />
httpport = 83 # Webinterface listening on '''http-port 83'''<br />
= +83 # Webinterface listening on '''https-port 83''' (SSL)<br />
0 # Webinterface disabled<br />
<br />
==== httpcert ====<br />
{{Optional/en}}<br />
<br />
file for http SSL certificate<br />
httpcert = oscam.cert # (look there)<br />
= # [blank] file oscam.pem (embedded) is used<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
example<br />
httpforcesslv3 = 0 none (default)<br />
= 1 force using SSLV3<br />
<br />
==== httpuser ====<br />
{{Optional/en}}<br />
<br />
Username for password protection. [blank] is default, of which is strongly discouraged! <br />
httpuser = # xyxyxy (all characters and figures are allowed)<br />
<br />
==== httppwd ====<br />
{{Optional/en}}<br />
<br />
Password for password protection. It is the same as for httpuser.<br />
httppwd = # 123456<br />
<br />
'''The ''user'' and ''pwd'' parameters are queried when connecting to the webinterface in a messagebox. If they are missing ore corrupted a message ''Forbidden'' appears and the connection is aborted!'''<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6625:05/15/2012</span><br />
<br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Do not add the content of the embedded CSS before the content of the custom CSS (default)<br />
1 # embedded CSS will be added before external custom CSS (specified by the [[#httpcss|httpcss]] parameter)<br />
<br />
This parameter can be used to override the embedded CSS with custom styles. To see the current CSS styles use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
==== httpcss ====<br />
{{Optional/en}}<br />
<br />
path for external CSS file<br />
<br />
For webinterface different styles are available. Put custom CSS files (ending with .css extension) in the oscam config directory to managed your custom styles with WebIf.<br />
<br />
Example<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] embedded style is used (default)<br />
<br />
To see the current CSS style, use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
Styles you find here: [[Streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
==== httptpl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7083:06/25/2012</span><br />
<br />
path for external templates and picons<br />
httptpl =<br />
= # [blank] No external templates<br />
<br />
path for external templates and picons, multiple simultaneously templates and picons are possible by creat‐ <br />
ing sub folders (maximum length of 32 alphanumeric characters), sub folders naming is corresponding to sub <br />
folder in URL, default:none <br />
<br />
example <br />
httptpl = /this/is/my/path <br />
<br />
folder with multiple templates: <br />
/this/is/my/path/template<br />
/this/is/my/path/template2 <br />
<br />
valid URLs: <br />
http://host:port/template1 <br />
http://host:port/template2<br />
<br/><br />
<br/><br />
==== httpoverwritebakfile ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = overwrite backup configurations files (*.bak)<br />
0 = default<br />
<br/><br />
<br/><br />
<br />
<br />
<br />
==== httplocale ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
set the "locale environment"<br />
<br />
default = blank [none]<br />
<br />
look here::<br />
<br />
http://en.wikipedia.org/wiki/locale<br />
<br />
==== httpjscript ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
path for oscam.js javascript, def: none<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional/en}}<br />
<br />
status refresh in seconds<br />
<br />
httprefresh = 7 # status will be refreshed after 7 seconds<br />
= # [blank] no refreshing<br />
<br />
==== httppollrefresh ====<br />
{{Optional/en}}<br />
<br />
refreshtime for polling in seconds<br />
<br />
httppollrefresh = 60 # polling will be refreshed after 60 seconds<br />
= # [blank|0] no refreshing poll<br />
<br />
==== httpshowpicons ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # show picons in userlist<br />
0 # default<br />
<br />
If this parameter is enables, then a new column is added to the USERS tab which display the picons of the last watched channels by active users. The folder where the picons must be configured in the httppiconpath.<br />
<br />
Possible format are:<br />
IC_caid_srvid.tpl<br />
IC_caid_provid_srvid.tpl<br />
IC_servicename.tpl<br />
<br />
added support for picons by channel name<br /><br />
syntax is:<br /><br />
take service-name from oscam.srvid,<br /><br />
replace all upper-case letters with lower case,<br /><br />
replace * with star,<br /><br />
replace & with and,<br /><br />
replace + with plus,<br /><br />
remove everything but a-z and 0-9,<br /><br />
if the result is name, the picon file will be IC_name.tpl<br /><br />
for example:<br /><br />
service-name "BBC-ONE +HD"<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
if service-name ends with hd, and picon is not found, fallback to name without hd, example:<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
-> not found, search for:<br /><br />
picon file: "IC_bbconeplus.tpl"<br /><br />
<br />
==== httphideidleclients ====<br />
{{Optional/en}}<br />
<br />
Enables hiding clients after idle time set with parameter ''' hideclient_to''' in section [monitor].<br />
httphideidleclients = 1 # hide<br />
= 0 # hide not (default)<br />
<br />
==== hideclient_to ====<br />
{{Optional/en}}<br />
<br />
Time to hide clients in the monitor if not sending requests. See also parameter '''httphideidleclienst''' in section [webif].<br />
hideclient_to = 1 # hide clients<br />
= 0 # no hide<br />
<br />
==== httphidetype ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
type = letter which defines types to hide in web interface status page (see Typ column), <br />
default: none. s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
==== httpscript ====<br />
{{Optional/en}}<br />
<br />
Path to an executable script which you wish to start from web interface<br />
httpscript = # path<br />
= # [blank] no path<br />
<br />
You can run script file from script.html (SCRIPTS item in main menu)<br /><br />
If the script file contains the "echo" will be it displayed in a Web interface.<br />
<br />
If the file can not run displays<br />
[Error]: Script "name_of_script.sh" not executable!<br />
<br />
If does not exist script displays<br />
[Error]: Script "name_of_script.sh" not found!<br />
(Works If you delete the script and refresh page)<br />
<br />
==== httpallowed ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8842:08/17/2013</span><br />
<br />
http web interface connections allowed. [blank] is allowed (default), but that makes no sense! If the webinterface to be used, then there must be a way to connect with him. Therefore we declare this parameter as '''mandatory'''!<br />
<br />
With '''::1''' OSCam decides to resolve 'localhost' to '''IPv6'''!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
<br />
<br />
Example<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host and range 192.168.0 are allowed<br />
resolving to IPv6<br />
<br />
'''default values'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1<br />
<br />
==== httpdyndns ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6558:03/21/12</span><br />
<br />
http web interface connections allowed<br />
<br />
httpdyndns = hostname [,hostnahme][,hostname]<br />
<br />
Example<br />
httpdyndns = host1.example.com,host2.example.com<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional/en}}<br />
<br />
write config:<br />
0 = all not empty parameters, all not default parameters, all parameters not containing the same value as the same parameter in global configuration (default)<br />
1 = all parameters<br />
<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional/en}}<br />
<br />
read only modus for web interface<br />
<br />
httpreadonly = 1 # only read<br />
= 0 # all is possible (default)<br />
<br />
<br />
==== httppiconpath ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9463/01/28/2014</span><br />
<br />
httppiconpath = path<br />
<br />
path to picons, default [blank] none<br />
<br />
====httphelplang====<br />
{{required}}<br />
<br />
set right language for wiki entry point<br />
de|en|fr <available wiki languages><br />
<br />
==== httposcamlabel ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
set individual label in web interface header, default: OSCam<br />
<br />
==== http_status_log ====<br />
{{Optional/en}}<br />
<br />
http_status_log = 0|1<br />
1 = display log in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowreaderinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowreaderinfo = 0|1<br />
1 = display readers informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowecminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowecminfo = 0|1<br />
1 = display readers and users ECM informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowuserinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowuserinfo = 0|1<br />
1 = display users informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowcacheexinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowcacheexinfo = 0|1<br />
1 = display CacheEX informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowmeminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowmeminfo = 0|1<br />
1 = display memory usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowloadinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowloadinfo = 0|1<br />
1 = display load average and CPU usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
<br/><br />
<br/><br />
<br />
=== [cache] ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW since svn 8358:02/16/2013</span><br />
<br />
{{OSCamConfCacheParameter}}<br />
<br />
'''cw_cache - info'''<br /><br />
cache of CWs which are saved to detect/drop old CWs arriving via CacheEx<br />
<br />
to enable this feature, you have to define cw_cache_size or cw_cache_memory to set the cache-size<br />
and cw_cache_settings to define for what CWs which action is taken. <br />
<br />
if cw_cache_size or cw_cache_memory is defined, the default is, that incoming known CWs older then 15 seconds are dropped, cause they are useless.<br />
<br />
<br />
'''ecm_cache - info'''<br /><br />
<br />
cache of ECMs which are saved to detect/drop old ECMs <br />
<br />
if you are facing problems with getting old ECMs, with this feature you are able to drop known ECMs<br />
to enable this feature, you have to define ecm_cache_size or ecm_cache_memory to set the cache-size<br />
<br />
<br />
==== delay ====<br />
{{optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
==== max_time ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
<br />
==== cw_cache_settings ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
cw_cache_settings = caid[&mask][@provid][$servid]:mode:timediff_old_cw[,n]<br />
= [blank] disabled<br />
<br />
* mode:<br />
1 = just write logs @ log-level 8192<br />
2 = drop CWs which match this rule & write logs @ log-level 8192<br />
<br />
* timediff_old_cw:<br />
time = time in miliseconds after a known CW is detected/dropped<br />
<br />
Example:<br />
<br />
cw_cache_settings = 0:2:1500,BEEF@012345:2:620,1337:1:170<br />
* for all CWs not matching any other rule => drop if the CW is known for more then 1500ms<br />
* drop CWs of caid BEEF with provid 012345, if they are known for more then 620ms<br />
* log CWs of caid 1337 with all provids, if they are known for more then 170ms<br />
<br />
<br />
==== cw_cache_size ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
cw_cache_size = count of max. CWs for cw_cache<br />
= 0 (default)<br />
<br />
<br />
==== cw_cache_memory ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
cw_cache_memory = size (in MB) of the cw_cache<br />
= 0 (default)<br />
<br />
<br />
==== ecm_cache_size ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
ecm_cache_size = count of max. ECMs for ecm_cache<br />
= 0 (default)<br />
<br />
<br />
==== ecm_cache_memory ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
ecm_cache_memory = size (in MB) of the ecm_cache<br />
= 0 (default)<br />
<br />
<br />
==== ecm_cache_droptime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
ecm_cache_droptime = time in seconds after a known ECM is dropped with return-code E_INVALID<br />
= 0 (default)<br />
<br />
<br />
==== max_hit_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8910:09/10/2013</span><br />
<br />
max_hit_time = in seconds<br />
<br />
maximum time for cache exchange hits resists in cach for evaluating wait_time, default: 15<br />
<br />
<br />
==== wait_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 8077:01/06/2013</span><br />
<br />
wait_time = milli-seconds<br />
= [blank] none (default)<br />
<br />
wait time for cache exchange (mode 2 & 3 only!)and Cardserverproxy before sending ECM to reader or proxy<br />
<br />
Example:<br />
0:50:250,0200@00009X:50:150:950,0500@000001:150:1602&ffdf:1200<br />
<br />
==== waittime_block_start ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
waittime_block_start = number of (dyn)wait_time timeouts to start blocking the use of (dyn)wait_time for this service(caid:provid:srvid)<br />
= 0 (default)<br />
<br />
<br />
==== waittime_block_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
waittime_block_time = seconds the (dyn)wait_time isn't used and ECMs are forwarded to the reader/s<br />
= 0 (default)<br />
<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional/en}}<br />
<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode:<br />
specify behaviour for counter parameter<br />
<br />
0 = when wait_time expires, serve highest counter's cw got anyway, even if no counter reached.<br />
1 = never serve cw (coming from cacheex) stored in cache if its counter not reaches counter. When wait_time expires, requests<br />
will go to normal readers! Only when a cw reaches counter, it can be served to clients.<br />
<br />
Default = 0<br />
<br />
<br />
* counter:<br />
set minimum cw counter to allow cw is used.<br />
<br />
Default = 1 (use default behaviour: use cw with highest counter when cache is checked)<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = allow bad cycles from a fixed fallback reader. Default = 0<br />
<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== csp_port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
This is a UDP ('''not TCP''') listen port for incoming traffic from csp nodes<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
==== csp_serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
This is the local bind IP of csp_port (see above!)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 disable (default)<br />
= 1 enable<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: not for all NDS SC's!'''<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID enabled for CW cycle check, default: none<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = count<br />
<br />
maximum CW cycle list entries, default = 500, maximum = 4000<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = minutes<br />
<br />
minimum time a learned cycletime resists in memory, default = 0, maximum = 15<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = log bad CW cycle only <br />
1 = drop bad CW cycle (default)<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, <br />
1 = drop old CW cycle, <br />
0 = no drop(default)<br />
<br/><br />
==== cwcycle_sensitive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (or more) same bytes and drop new CW<br />
3 = 3 (or more) same bytes and drop new CW<br />
4 = 4 (or more) same bytes and drop new CW<br />
<br />
<br/><br />
==== cwcycle_usecwcfromce ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = use CW Info from cache exchange<br />
0 = default<br />
<br/><br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
answer when cache exchange timeount expires, if no normal readers are vavailable for sending ECM's::<br />
<br />
0 = immediatly send '''not found''' to client (default)<br />
1 = wait for cache exchange answer until client timeout expires<br />
<br />
==== cacheex_dropdiffs ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
cacheex_dropdiffs = 1 drop incoming not-localgenerated-flagged CWs which differ from the first CW<br />
= 0 (default)<br />
<br />
<br />
==== cacheex_nopushafter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
don't forward CWs from local/proxy-reader via CacheEx, if the defined time_in_ms for the CAID is reached<br /><br />
here in oscam.conf this setting is for evaluating the response-time for local/proxy-readers and is used for CacheEx2-reader/CacheEx3-user as default, when no reader/user cacheex_nopushafter is set.<br />
<br />
cacheex_nopushafter = CAID:time_in_ms[,n]<br />
<br />
<br />
==== cacheex_lg_only_remote_settings ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
possibility to deny cacheex-receiver/client(cx2: user / cx3: reader) to overwrite the following settings @ cacheex-sending-instance<br />
cacheex_localgenerated_only<br />
cacheex_lg_only_tab<br />
<br />
it makes sense if you want to force your local settings.<br />
if the user/reader isnt allowed to overwrite your values, <br />
* it is still possible for the cacheex-receiver to set cacheex_localgenerated_only=1, if the user/reader define cacheex_localgenerated_only_in=1 ; but it is only @ cacheex-sending-instance possible to disable it<br />
* it is still possible for the cacheex-receiver to add cacheex_lg_only_tab, if the user/reader define cacheex_lg_only_in_tab=1234,1337 ; but it is only merged to the sender-instance cacheex_lg_only_tab values<br />
<br />
if cacheex_lg_only_remote_settings @oscam.conf is enabled, the user/reader-settings are ignored.<br />
if cacheex_lg_only_remote_settings @oscam.conf is disabled, the user/reader-settings are used.<br />
<br />
cacheex_lg_only_remote_settings = 0|1 (default: 0 /opt-out)<br />
<br />
<br />
==== cacheex_localgenerated_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are flagged as localgenerated<br /><br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized <br />
<br />
cacheex_localgenerated_only = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_lg_only_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are lg-flagged for these list of caid/provid(s)<br /><br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
<br />
==== cacheex_localgenerated_only_in ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
drop incoming CWs which are NOT flagged as localgenerated<br /><br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized<br />
<br />
cacheex_localgenerated_only_in = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_lg_only_in_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
allow incoming CWs only if they are lg-flagged for these list of caid/provid(s)<br /><br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_in_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
<br />
==== cacheex_lg_only_in_aio_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
use drop lg-only settings (cacheex_localgenerated_only_in & cacheex_lg_only_in_tab) only if peer is detected as cx-aio-patched or svn >= 11588<br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized<br />
<br />
cacheex_lg_only_in_aio_only = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_ecm_filter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
set a global cacheex_ecm_filter<br /><br />
here in oscam.conf, the default value is set; user/reader-settings are prioritized<br />
<br />
cacheex_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
<br />
<br />
==== cacheex_ecm_filter_aio ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
set a global cacheex_ecm_filter which is used if peer is detected as cx-aio-patched or svn >= 11588<br />
the default limit of 15/30 (camd3/cccam) filters is obsolete<br />
<br />
here in oscam.conf, the default value is set; user/reader-settings(cacheex_ecm_filter) are prioritized<br />
<br />
cacheex_ecm_filter_aio = [caid][&mask][@provid][$servid],n<br />
<br />
<br />
==== cacheex_push_lg_groups ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
push all lg-flagged CWs to this/these group/s, without checking the groupmembership of the peer<br />
<br />
cacheex_push_lg_groups = [blank] (default)<br />
= 1[,n]<br />
<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
<br/><br />
<br />
=== csp (UDP) ===<br />
Section only needed if using cache exchange<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:02/16/2013 look at '''[cache]'''!</span><br />
<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6124:12/23/2011</span><br />
<br />
UDP listen port for incoming traffic from csp nodes<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
==== serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6124:12/23/2011</span><br />
<br />
Local bind IP of the above udp port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
=== Camd 33 (TCP) ===<br />
Section required only if camd33 will be used as client protocol!<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for camd 3.3x clients, 0 = disabled, default:0<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # listenig to all<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured camd 3.3x client connection<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
Example:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt = [none]<br />
<br />
==== passive ====<br />
{{Optional/en}}<br />
<br />
force passive camd 3.3x client<br />
<br />
Camd3.3x protocol generally has aktive clients. In certain circumstances the client must switched on only "passive" mode.<br />
<br />
Example:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
==== key ====<br />
{{Optional/en}}<br />
128 bit key<br />
<br />
key for camd 3.3x client encryption<br />
<br />
<br />
Example:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key = # (blank] none (default)<br />
<br />
=== cs357x (UDP) ===<br />
Section required only if cs357x will be used as client protocol! These protocols principle encrypt and build the key from user name.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''cs357x''' was also known as '''camd35''' designated. Both terms mean the same protocol with the same functions and parameters. In the future, to avoid confusion '''only cs357x''' is used.<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
UDP port for camd 3.5x|cs357x clients. Port must be opened at router!<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35|cs3.57x-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== cs378x (TCP) ===<br />
Section required only if cs378x (camd 3.5x in TCP) will be used as client protocol!<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
Port(s) TCP for Cs378x clients (camd 3.5x in TCP mode). Port(s) must be opened at router!<br />
<br />
port@CAID[:ident][,ident]...[;port@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@0500:030B00;22764@0648<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell cs3.78x clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disable<br />
<br />
<br />
Mor here: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== Newcamd (TCP) ===<br />
Section required only if newcamd will be used as client protocol!<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
==== key ====<br />
{{required}}<br />
DES key<br />
Default key for newcamd client encryption.<br />
<br />
Example:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
==== port ====<br />
{{required}}<br />
TCP port/DES key/CAID/ident definitions. Each CAID requires a separate port. If you don't specify a DES key for a port, the default DES Key will be used!<br />
<br />
port[{DES key}]@CAID[:ident][,ident]...[;port[{DES key}]@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@1234:000000 # (CAID 1234 connected with port 15000)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 connected with port 15000. CAID 5678 with port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = [blank]<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
!! Dyn DNS Addresses are not forseen here and won't work !!<br />
<br />
Example:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed = [blank]<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<br />
Example:<br />
keepalive = 1 # (enabled)<br />
keepalive = 0 # (disabled)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
==== mgclient ====<br />
{{Optional/en}}<br />
<br />
Enable mgcamd extended newcamd protocol, allowing for a single connection to work with mutliple providers, default:0<br />
<br />
Example:<br />
mgclient = 1 # (enabled)<br />
mgclient = 0 # (disabled)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br/><br />
<br/><br />
=== '''scam''' ===<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9878:09/29/2014</span><br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port = port<br />
<br />
UDP port for scam server, default = 0<br />
<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br/><br />
<br/><br />
<br />
=== Radegast ===<br />
Section required only if radegast will be used as client protocol!<br />
<br />
{{OSCamConfRadegastParameter}}<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for radegast clients (enables radegast)<br />
port =<br />
= 0 (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br />
==== user ====<br />
{{required}}<br />
<br />
user name for radegast client<br />
user = username<br />
<br />
=== Serial ===<br />
Section required only if seral interface will be used!<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
==== device ====<br />
{{Optional/en}}<br />
<br />
Parameter of device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = name of Serial Device<br />
option = timeout = milli seconds timeout for connection default: 50<br />
= delay milli seconds additive between 2 characters<br />
<br />
supported serial devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
=== Cccam (TCP) ===<br />
Section required only if Cccam will be used as client protocol!<br />
{{OSCamConfCccamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6206:01/07/2012</span><br />
<br />
Port = 0|port[,port...]<br />
<br />
TCP/IP-Ports for CCcam clients, enables Cccam protocol!<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled (default)<br />
<br />
==== version ====<br />
{{Optional/en}}<br />
<br />
<br />
define CCcam version, minimum CCcam version 2.0.11, used with original CCcam only, default:none<br />
<br />
<nowiki><main version>,<version>,<sub version></nowiki><br />
<br />
Example:<br />
version = 2.0.11<br />
<br />
==== reshare ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
reshare level for CCcam clients:<br />
-1 = no resharing<br />
0 = resharing for direct peer only<br />
1 = resharing for direct peer and next level<br />
x = resharing for direct peer and next x level (x for number of level)<br />
10 = (default)<br />
<br />
Example:<br />
reshare = 1 resharing only for direct peer and next level<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
==== reshare_mode ====<br />
{{Optional/en}}<br />
<br />
CCcam reshare mode<br />
0 = reader reshares only received SCs for CCcam readers,<br />
defined filters/CAIDs/idents on other readers (default)<br />
1 = reader reshares received SCs (like=0) and defined services<br />
2 = reader reshares only defined reader services as virtual SCs<br />
3 = reader reshares only defined user services as virtual SCs<br />
4 = reader reshares only received cards<br />
<br />
Every server is shared as hop=0 and with defined reshare values.<br />
<br />
Service reshare only works if positive services defined: no service - no reshare!<br />
<br />
==== ignorereshare ====<br />
{{Optional/en}}<br />
<br />
<br />
CCcam reshare setting:<br />
0 = use reshare setting of server (default)<br />
1 = use reshare setting of reader or user<br />
<br />
Example:<br />
ignorereshare = 1 reshare settings of reader or user are used<br />
<br />
==== stealth ====<br />
{{Optional/en}}<br />
<br />
Behaviour like the original CCcam: no activate partner detection and extended OSCam-CCcam protocol, prevent other OSCam to detect the server as OSCam server.<br />
<br />
stealth = 1 # stealth enabled<br />
= 0 # stealth disabled (default)<br />
<br />
==== minimizecards ====<br />
{{Optional/en}}<br />
<br />
mode how to provide CCcam servers to CCcam clients:<br />
0 = no aggregation, remove duplicates only (default)<br />
1 = based on minimum hop: two SCs with different hops are summarized, new SCs get a smaller hop<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional/en}}<br />
<br />
<br />
interval to provide share list update to CCcam clients in seconds<br />
0 = update based on server updates, values <= 10 are invalid and will be set to 30 <br />
= [blank] 240 (default)<br />
<br />
==== keepconnected ====<br />
{{Optional/en}}<br />
<br />
set CCcam keepalive modus:<br />
0 = disconnect client when max idle time is reached<br />
1 = keep client connected (default)<br />
<br />
==== recv_timeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7672:10/09/2012</span><br />
<br />
recv_timeout = milli-seconds<br />
<br />
set network timeout for receiving data<br />
default = 2000<br />
<br />
==== forward_origin_card ====<br />
{{Optional/en}}<br />
<br />
forward_origin_card = 0|1<br />
<br />
1 = forward ECM request to reader holding this card, loadbalancer, fallback and caching will be disabled <br />
0 = default<br />
<br />
==== nodeid ====<br />
{{Optional/en}}<br />
<br />
nodeid = ID<br />
<br />
set CCcam node ID in hex, default:none<br />
<br />
example<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br/><br />
=== Pandora ===<br />
{{OSCamConfPandoraParameter}}<br />
<br />
==== pand_skip_send_dw ====<br />
<br />
<br />
pand_skip_send_dw = dummy<br />
<br />
<br />
==== pand_allowed ====<br />
<br />
<br />
pand_aloowed = dummy<br />
<br />
<br />
==== pand_usr ====<br />
<br />
<br />
pand_user = dummy<br />
<br />
<br />
==== pand_pass ====<br />
<br />
<br />
pand_pass = dummy<br />
<br />
<br />
==== pand_ecm ====<br />
<br />
<br />
pand_ecm = dummy<br />
<br />
<br />
==== pand_port ====<br />
<br />
<br />
pand_port = dummy<br />
<br />
<br />
==== pand_srvid ====<br />
<br />
pand_srvid = dummy<br />
<br />
<br/><br />
<br/><br />
<br />
=== GBox ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
{{OScamConfGboxParameter}}<br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 {3 3}}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== hostname ====<br />
{{required}}<br />
<br />
hostname = my IP or ddns<br />
<br />
examples:<br />
hostname = 192.168.1.120<br />
hostname = willy.noip.org<br />
<br />
<br/><br />
<br />
==== my_password ====<br />
{{required}}<br />
<br />
my_password = 4 hex bytes, 8 chara<br />
<br />
example:<br />
my_password = 98AF3E25<br />
<br />
<br/><br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port= define incoming UDP port(s) used by Gbox protocol<br />
<br />
port= port#1[[,port#2]...[,port#32]]<br />
<br />
Maximum 32 ports.<br />
<br />
<br/><br />
<br />
==== proxy_card ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy reader card(s) to be reshared into gbox network, default = none<br />
<br />
proxy_card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
example:<br />
<br />
proxy_card = 18300000,0D950400,05050F00 <br />
<br />
<br/><br />
<br />
==== ccc_reshare ====<br />
{{Optional/en}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = enable cccam-cards to be reshared into gbox network, default = 0 (global setting)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' peer specific reshare level to be set in oscam.server [reader] -> cccam_reshare<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' peer specific ident filter can be set in oscam.server [reader] -> ccc_gbx_reshare_ident<br />
<br />
<br/><br />
<br />
==== my_vers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9645:04/09/2014</span><br />
<br />
<br />
my_vers = version<br />
<br />
set gbox version hexadecimal low byte<br />
<br />
default = 2A<br />
<br />
<br/><br />
<br />
==== my_cpu_api ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9712:05/11/2014</span><br />
<br />
<br />
my-cpu_api = byte<br />
<br />
set gbox CPU and API byte in hexadecimal, default = 61<br />
<br />
<br/><br />
<br />
==== gbox_reconnect ====<br />
{{Optional/en}}<br />
<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min:60, max:300<br />
<br />
<br/><br />
<br />
==== accept_remm_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11399:29/01/2018</span><br />
<br />
Accept to send Remote EMMs to specified Server Peer-IDs<br />
<br />
accept_remm_peer = peer#1[[,peer#2]...[,peer#8]]<br />
<br />
<br/><br />
<br />
==== dis_attack_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11360:16/02/2017</span><br />
<br />
Disable creation of attack.txt<br />
<br />
dis_attack_txt = 0|1 - default: 0 <br />
<br />
<br/><br />
<br />
==== log_hello ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11231:20/04/2016</span><br />
<br />
Display hello messages in debug log<br />
<br />
log_hello = 0|1 - default: 1 <br />
<br />
<br/><br />
<br />
==== ignore_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Ignore specific peer ID(s) totally. Login rejected.<br />
<br />
ignore_peer = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== block_ecm ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Block ECM for specific peer ID(s).<br />
<br />
block_ecm = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== tmp_dir ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/2014</span><br />
<br />
gbox tempory directory<br />
<br />
tmp_dir = /path/to/dir <br />
<br />
default: /tmp/.oscam<br />
<br />
<br/><br />
<br />
==== gsms_disable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9714:05/11/2014</span><br />
<br />
<br />
gsms_disable = 0|1<br />
<br />
0 - Gbox Short Message Service (GSMS) is enabled<br/><br />
1 - disable gbox short message service (GSMS)<br/><br />
<br />
default = 1<br />
<br />
<br/><br />
<br/><br />
<br />
==== gbox_save_gsms ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_save_gsms=0|1<br />
<br />
0 = don't save GSMS in configuration<br/><br />
1 = save all GSMS field in configuration<br />
<br />
You need to press save button to really save it!<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_type=0|1<br />
<br />
0 = normal text message<br/><br />
1 = normal text message + OSD (On Screen Display)<br />
<br/><br />
<br/><br />
<br />
==== gbox_dest_peers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_dest_peers = [BOXID[,BOXID]...[,BOXID]]<br />
<br />
Maximum 16 * 2 bytes (4 hexa digits), comma-separated. For broadcast to all use FFFF.<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_txt=Your text to send to peers.<br />
<br />
From 6 to 127 alphanumerical characters.<br />
<br/><br />
<br/><br />
<br />
=== DVBapi ===<br />
{{Optional/en}}<br />
<br />
Section required only if OSCam will also be used as client!<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional/en}}<br />
<br />
DVB API enabled<br />
<br />
Example:<br />
enabled = 0 # disabled (default)<br />
enabled = 1 # enabled<br />
<br />
==== user ====<br />
{{required}}<br />
user name for DVB API client<br />
Example:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
==== au ====<br />
{{Optional/en}}<br />
<br />
AU mode for dvbapi:<br />
au = 0 # disable AU (default)<br />
au = 1 # enable AU<br />
<br />
==== pmt_mode ====<br />
{{Optional/en}}<br />
PMT mode:<br />
pmt_mode = 0 # use camd.socket and PMT file (default)<br />
pmt_mode = 1 # disable reading PMT file<br />
pmt_mode = 2 # disable camd.socket<br />
pmt_mode = 3 # read PMT file on startup only<br />
pmt_mode = 4 # do not use signal handler for monitoring /tmp<br />
pmt_mode = 5 # do not use signal handler to monitor /tmp & disable camd.socket<br />
pmt_mode = 6 # use PMT server mode <span style="background-color:Green;color:White;padding:0 5px;">NEU - NEW - NOUVEAU - NUOVO svn8680:05/06/2013</span><br />
<br />
==== request_mode ====<br />
{{Optional/en}}<br />
CAID request mode:<br />
0 = try all possible CAIDs one by one (default)<br />
1 = try all CAIDs simultaneously<br />
<br />
==== listen_port ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP/IP port for SAT IP clients, filtering has to be done on client site<br />
<br />
0 = disabled (default)<br />
<br />
==== boxtype ====<br />
{{required}}<br />
set boxtype, auto detection of DVB API will be aspired:<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt|qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
ipbox with camd.socket support, currently only with PGI image version 0.6 or above, verified on HD models only<br />
<br />
ipbox-pmt can be used on any DGS based images (with or without camd.socket support), verified on HD models only<br />
<br />
pc is for generic pc support (currently supported on VDR with vdr-plugin-dvbapi)<br />
<br />
==== cw_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
cw_delay = milli-seconds<br />
<br />
delay of CW writing, default = none<br />
<br />
==== delayer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6808:05/14/2012</span><br />
<br />
delayer = milli-seconds<br />
<br />
minimum time to write CW<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
= 1 reopen demux devices in each channel switching,<br />
= 0 default<br />
<br />
==== decodeforever ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = trying to decode on all CAIDs<br />
0 = default<br />
<br />
==== ecminfo_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10722:06/13/15</span><br />
<br />
Define the type of ecm.info file to create, ecminfo_type = 0|1|2|3|4|5<br />
<br />
0 = default oscam syntax<br />
1 = default oscam syntax with ecmtime in ms instead of s<br />
2 = wicardd<br />
3 = mgcamd<br />
4 = cccam<br />
5 = camd3<br />
<br />
==== read_sdt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10766:06/15/15</span><br />
<br />
If it is not yet available, this option automatically add entries in your oscam.srvid2 (or oscam.srvid) and in your oscam.provid files. You need to stay '''more than 30 seconds''' on a channel for the auto-detect to start. So both channel name and provider name are retrieved. If entries already exist they are not changed nor updated, so you keep full control on the content of both files, only missing entries are added.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = disabled (default)<br />
1 = on, do not save FTA channels<br />
2 = on, save FTA channels<br />
<br />
==== write_sdt_prov ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10841:06/27/15</span><br />
<br />
First enable the read_sdt parameter then you can specify if the provider name is saved or not into the oscam.srvid2 or oscam.srvid file. This is not mandatory since the provider name is now retrieved automatically from the oscam.provid file.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = off, do not write provider name into oscam.srvid/2 (default)<br />
1 = on, write provider name into oscam.srvid/2<br />
<br />
=== Anticasc ===<br />
Section is needed if anticascading will be used to protect against unauthorized forwarding CardSharing. <br />
{{OSCamConfAnticascParameter}}<br />
<br />
==== enabled ====<br />
{{required}}<br />
<br />
enabled anti-cascading:<br />
enabled = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== numusers ====<br />
{{Optional/en}}<br />
anti-cascading: user per account (number)<br />
numusers = 0 # anticascading disabled (default)<br />
= 1 # cascading for 1 user allowed ==> (1*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 11 ecms allowed per minute<br />
= 2 # cascading for 2 users allowed ==> (2*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 17 ecms allowed per minute <br><br />
<span style="color:Blue;padding:0;5px"><B>10</B></span> = number you have put in oscam.ac. Default value is 10<br />
<br />
==== sampletime ====<br />
{{Optional/en}}<br />
duration of sample in minutes:<br />
sampletime = 5 # duration 5 minutes<br />
= # [blank] duration 2 minutes (default)<br />
<br />
Ex: numusers = 1 ==> 11 ecms * 5 minutes ==> 55 ecms allowed in 5 minutes <br />
numusers = 2 ==> 17 ecms * 5 minutes ==> 85 ecms allowed in 5 minutes<br />
<br />
==== samples ====<br />
{{Optional/en}}<br />
<br />
number of additionnal ecms allowed (possible values between 2 and 10)<br />
samples = 7 # 7 additional ecms allowed<br />
= # [blank] 10 additional ecms allowed (default)<br />
<br />
==== penalty ====<br />
{{Optional/en}}<br />
Level of the penalty if the user exceeds the result shown in Ex on Sampletime<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay ([[OSCam/en/Config/oscam.conf#fakedelay|fakedelay]])<br />
<br />
penalty can be overwritten per user in oscam.user<br />
<br />
==== aclogfile ====<br />
{{Optional/en}}<br />
file for anti-cascading logging<br />
aclogfile =<br />
= # [blank] no logfile (default)<br />
<br />
==== fakedelay ====<br />
{{Optional/en}}<br />
<br />
fake delay time in milli seconds (possible values between 100 and 3000)<br />
fakedelay = 500 # delay 500 milli seconds<br />
= # [blank] 1000 milli seconds (default)<br />
<br />
==== denysamples ====<br />
{{Optional/en}}<br />
<br />
How many samples should be penalized?<br />
denysamples = 10 # 10 samples will be penalized<br />
= # [blank] 8 Samples will penalized (default)<br />
<br/><br />
<br />
==== acosc_enabled ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br/><br />
acosc_enabled = 0|1<br />
1 = enable anticascading oder SIDs count<br />
0 = default<br />
<br/><br />
==== acosc_max_active_sids ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = count<br />
<br />
maximum activ SIDs with anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br />
<br/><br />
<br />
==== acosc_zap_limit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = count<br />
<br />
zap limit for anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
level of penalty with anticascading over SIDs count:<br />
<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = seconds<br />
<br />
penalty duration for anticascading over SIDs count:<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
==== acosc_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_delay = milliseconds<br />
<br />
delay for anticascading over SIDs count<br />
<br />
0 = unlimites (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
<br />
<br />
<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13569
OSCam/en/Config/oscam.server
2021-03-02T13:01:43Z
<p>Felixka: /* gbox */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident = <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
==== cacheex_maxhop_lg ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
define a maxhop for lg-flagged cws for push/receive, to allow a higher maxhop than for non-flagged cws<br />
<br />
cacheex_maxhop_lg = 0 (default) use value of cacheex_maxhop<br />
= 1 to 10 = set maxhop (if value is lower than cacheex_maxhop, value of cacheex_maxhop is used)<br />
<br />
==== cacheex_allow_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
set maxhop-settings remote, if remote reader/user has cacheex_allow_maxhop = 1 (default: 0 /opt-in)<br />
<br />
cacheex_allow_maxhop = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_nopushafter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
don't forward CWs from local/proxy-reader via CacheEx, if the defined time_in_ms for the CAID is reached<br />
<br />
cacheex_nopushafter = CAID:time_in_ms[,n]<br />
<br />
==== cacheex_lg_only_remote_settings ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
possibility to deny cacheex-receiver/client(cx2: user / cx3: reader) to overwrite the following settings @ cacheex-sending-instance<br />
cacheex_localgenerated_only<br />
cacheex_lg_only_tab<br />
<br />
it makes sense if you want to force your local settings.<br />
if the user/reader isnt allowed to overwrite your values, <br />
* it is still possible for the cacheex-receiver to set cacheex_localgenerated_only=1, if the user/reader define cacheex_localgenerated_only_in=1 ; but it is only @ cacheex-sending-instance possible to disable it<br />
* it is still possible for the cacheex-receiver to add cacheex_lg_only_tab, if the user/reader define cacheex_lg_only_in_tab=1234,1337 ; but it is only merged to the sender-instance cacheex_lg_only_tab values<br />
<br />
if cacheex_lg_only_remote_settings @oscam.conf is enabled, the user/reader-settings are ignored.<br />
if cacheex_lg_only_remote_settings @oscam.conf is disabled, the user/reader-settings are used.<br />
<br />
cacheex_lg_only_remote_settings = 0|1 (default: 0 /opt-out)<br />
<br />
==== cacheex_localgenerated_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are flagged as localgenerated<br />
<br />
cacheex_localgenerated_only = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_lg_only_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are lg-flagged for these list of caid/provid(s)<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
==== cacheex_localgenerated_only_in ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
drop incoming CWs which are NOT flagged as localgenerated<br />
<br />
cacheex_localgenerated_only_in = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_lg_only_in_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
allow incoming CWs only if they are lg-flagged for these list of caid/provid(s)<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_in_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
==== cacheex_lg_only_in_aio_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
use drop lg-only settings (cacheex_localgenerated_only_in & cacheex_lg_only_in_tab) only if peer is detected as cx-aio-patched or svn >= 11588<br />
<br />
cacheex_lg_only_in_aio_only = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_cw_check_for_push ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
push only when cacheex_cw_check counter reached<br />
localgenerated-flagged CWs are always pushed out<br />
<br />
cacheex_cw_check_for_push = 0|1 (default: 0 /opt-in)<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID;CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830;098C:000000<br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password provided by peer (4 bytes, 8 hex chars)<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these CAIDs.<br />
'''Attention: The CAID filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 5<br />
<br />
<br/><br />
<br />
===== force_remm =====<br />
{{Optional/en}}<br />
<br />
Force remote emm <br />
<br />
force_remm = 0|1|... , default = 0 (disabled)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''use only to activate a card or if card entitlements are expired'''<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to be send into gbox network<br />
<br />
cccam_reshare = level default = -1<br />
<br />
cccam_reshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer plus next level<br />
= x # resharing for direct peer plus x share level<br />
<br />
<br/><br />
<br />
<br />
===== ccc_gbx_reshare_ident =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11687</span><br />
<br/><br />
{{Optional/en}}<br />
define CAID and provider of cccam cards you want to send to peer:<br />
ccc_gbx_reshare_ident = <CAID>:<prov>[,prov]...[;<CAID>:<prov>[,prov]...]...<br />
<br />
Example<br />
ccc_gbx_reshare_ident = 0100:123456,234567;0200:345678,456789<br />
= [blank] all available cccam cards are send to peer (default)<br />
<br/><br />
<br />
===== send_offline_cmd =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11687</span><br />
<br/><br />
{{Optional/en}}<br />
<br />
send offline cmd HERE to peers offline<br />
<br />
send_offline_cmd = 0|1 default = 0<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13568
OSCam/en/Config/oscam.server
2021-03-02T12:36:27Z
<p>Felixka: /* gbox */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident = <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
==== cacheex_maxhop_lg ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
define a maxhop for lg-flagged cws for push/receive, to allow a higher maxhop than for non-flagged cws<br />
<br />
cacheex_maxhop_lg = 0 (default) use value of cacheex_maxhop<br />
= 1 to 10 = set maxhop (if value is lower than cacheex_maxhop, value of cacheex_maxhop is used)<br />
<br />
==== cacheex_allow_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
set maxhop-settings remote, if remote reader/user has cacheex_allow_maxhop = 1 (default: 0 /opt-in)<br />
<br />
cacheex_allow_maxhop = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_nopushafter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
don't forward CWs from local/proxy-reader via CacheEx, if the defined time_in_ms for the CAID is reached<br />
<br />
cacheex_nopushafter = CAID:time_in_ms[,n]<br />
<br />
==== cacheex_lg_only_remote_settings ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
possibility to deny cacheex-receiver/client(cx2: user / cx3: reader) to overwrite the following settings @ cacheex-sending-instance<br />
cacheex_localgenerated_only<br />
cacheex_lg_only_tab<br />
<br />
it makes sense if you want to force your local settings.<br />
if the user/reader isnt allowed to overwrite your values, <br />
* it is still possible for the cacheex-receiver to set cacheex_localgenerated_only=1, if the user/reader define cacheex_localgenerated_only_in=1 ; but it is only @ cacheex-sending-instance possible to disable it<br />
* it is still possible for the cacheex-receiver to add cacheex_lg_only_tab, if the user/reader define cacheex_lg_only_in_tab=1234,1337 ; but it is only merged to the sender-instance cacheex_lg_only_tab values<br />
<br />
if cacheex_lg_only_remote_settings @oscam.conf is enabled, the user/reader-settings are ignored.<br />
if cacheex_lg_only_remote_settings @oscam.conf is disabled, the user/reader-settings are used.<br />
<br />
cacheex_lg_only_remote_settings = 0|1 (default: 0 /opt-out)<br />
<br />
==== cacheex_localgenerated_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are flagged as localgenerated<br />
<br />
cacheex_localgenerated_only = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_lg_only_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are lg-flagged for these list of caid/provid(s)<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
==== cacheex_localgenerated_only_in ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
drop incoming CWs which are NOT flagged as localgenerated<br />
<br />
cacheex_localgenerated_only_in = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_lg_only_in_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
allow incoming CWs only if they are lg-flagged for these list of caid/provid(s)<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_in_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
==== cacheex_lg_only_in_aio_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
use drop lg-only settings (cacheex_localgenerated_only_in & cacheex_lg_only_in_tab) only if peer is detected as cx-aio-patched or svn >= 11588<br />
<br />
cacheex_lg_only_in_aio_only = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_cw_check_for_push ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
push only when cacheex_cw_check counter reached<br />
localgenerated-flagged CWs are always pushed out<br />
<br />
cacheex_cw_check_for_push = 0|1 (default: 0 /opt-in)<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID;CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830;098C:000000<br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password provided by peer (4 bytes, 8 hex chars)<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these CAIDs.<br />
'''Attention: The CAID filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 5<br />
<br />
<br/><br />
<br />
===== force_remm =====<br />
{{Optional/en}}<br />
<br />
Force remote emm <br />
<br />
force_remm = 0|1|... , default = 0 (disabled)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''use only to activate a card or if card entitlements are expired'''<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to be send into gbox network<br />
<br />
cccam_reshare = level default = -1<br />
<br />
cccam_reshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer plus next level<br />
= x # resharing for direct peer plus x share level<br />
<br />
<br/><br />
<br />
<br />
===== send_offline_cmd =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11687</span><br />
<br/><br />
{{Optional/en}}<br />
<br />
send offline cmd HERE to peers offline<br />
<br />
send_offline_cmd = 0|1 default = 0<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13567
OSCam/en/Config/oscam.server
2021-03-02T12:33:40Z
<p>Felixka: /* gbox */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident = <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
==== cacheex_maxhop_lg ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
define a maxhop for lg-flagged cws for push/receive, to allow a higher maxhop than for non-flagged cws<br />
<br />
cacheex_maxhop_lg = 0 (default) use value of cacheex_maxhop<br />
= 1 to 10 = set maxhop (if value is lower than cacheex_maxhop, value of cacheex_maxhop is used)<br />
<br />
==== cacheex_allow_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
set maxhop-settings remote, if remote reader/user has cacheex_allow_maxhop = 1 (default: 0 /opt-in)<br />
<br />
cacheex_allow_maxhop = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_nopushafter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
don't forward CWs from local/proxy-reader via CacheEx, if the defined time_in_ms for the CAID is reached<br />
<br />
cacheex_nopushafter = CAID:time_in_ms[,n]<br />
<br />
==== cacheex_lg_only_remote_settings ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
possibility to deny cacheex-receiver/client(cx2: user / cx3: reader) to overwrite the following settings @ cacheex-sending-instance<br />
cacheex_localgenerated_only<br />
cacheex_lg_only_tab<br />
<br />
it makes sense if you want to force your local settings.<br />
if the user/reader isnt allowed to overwrite your values, <br />
* it is still possible for the cacheex-receiver to set cacheex_localgenerated_only=1, if the user/reader define cacheex_localgenerated_only_in=1 ; but it is only @ cacheex-sending-instance possible to disable it<br />
* it is still possible for the cacheex-receiver to add cacheex_lg_only_tab, if the user/reader define cacheex_lg_only_in_tab=1234,1337 ; but it is only merged to the sender-instance cacheex_lg_only_tab values<br />
<br />
if cacheex_lg_only_remote_settings @oscam.conf is enabled, the user/reader-settings are ignored.<br />
if cacheex_lg_only_remote_settings @oscam.conf is disabled, the user/reader-settings are used.<br />
<br />
cacheex_lg_only_remote_settings = 0|1 (default: 0 /opt-out)<br />
<br />
==== cacheex_localgenerated_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are flagged as localgenerated<br />
<br />
cacheex_localgenerated_only = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_lg_only_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are lg-flagged for these list of caid/provid(s)<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
==== cacheex_localgenerated_only_in ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
drop incoming CWs which are NOT flagged as localgenerated<br />
<br />
cacheex_localgenerated_only_in = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_lg_only_in_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
allow incoming CWs only if they are lg-flagged for these list of caid/provid(s)<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_in_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
==== cacheex_lg_only_in_aio_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
use drop lg-only settings (cacheex_localgenerated_only_in & cacheex_lg_only_in_tab) only if peer is detected as cx-aio-patched or svn >= 11588<br />
<br />
cacheex_lg_only_in_aio_only = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_cw_check_for_push ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
push only when cacheex_cw_check counter reached<br />
localgenerated-flagged CWs are always pushed out<br />
<br />
cacheex_cw_check_for_push = 0|1 (default: 0 /opt-in)<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID;CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830;098C:000000<br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password provided by peer (4 bytes, 8 hex chars)<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these CAIDs.<br />
'''Attention: The CAID filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 5<br />
<br />
<br/><br />
<br />
===== force_remm =====<br />
{{Optional/en}}<br />
<br />
Force remote emm <br />
<br />
force_remm = 0|1|... , default = 0 (disabled)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''use only to activate a card or if card entitlements are expired'''<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to be send into gbox network<br />
<br />
cccam_reshare = level default = -1<br />
<br />
cccam_reshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer plus next level<br />
= x # resharing for direct peer plus x share level<br />
<br />
<br/><br />
<br />
<br />
===== send_offline_cmd =====<br />
{{Optional/en}}<br />
<br />
send offline cmd HERE to peers offline<br />
<br />
send_offline_cmd = 0|1 default = 0<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13566
OSCam/en/Config/oscam.server
2021-03-02T12:26:42Z
<p>Felixka: /* gbox_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident = <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
==== cacheex_maxhop_lg ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
define a maxhop for lg-flagged cws for push/receive, to allow a higher maxhop than for non-flagged cws<br />
<br />
cacheex_maxhop_lg = 0 (default) use value of cacheex_maxhop<br />
= 1 to 10 = set maxhop (if value is lower than cacheex_maxhop, value of cacheex_maxhop is used)<br />
<br />
==== cacheex_allow_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
set maxhop-settings remote, if remote reader/user has cacheex_allow_maxhop = 1 (default: 0 /opt-in)<br />
<br />
cacheex_allow_maxhop = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_nopushafter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
don't forward CWs from local/proxy-reader via CacheEx, if the defined time_in_ms for the CAID is reached<br />
<br />
cacheex_nopushafter = CAID:time_in_ms[,n]<br />
<br />
==== cacheex_lg_only_remote_settings ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
possibility to deny cacheex-receiver/client(cx2: user / cx3: reader) to overwrite the following settings @ cacheex-sending-instance<br />
cacheex_localgenerated_only<br />
cacheex_lg_only_tab<br />
<br />
it makes sense if you want to force your local settings.<br />
if the user/reader isnt allowed to overwrite your values, <br />
* it is still possible for the cacheex-receiver to set cacheex_localgenerated_only=1, if the user/reader define cacheex_localgenerated_only_in=1 ; but it is only @ cacheex-sending-instance possible to disable it<br />
* it is still possible for the cacheex-receiver to add cacheex_lg_only_tab, if the user/reader define cacheex_lg_only_in_tab=1234,1337 ; but it is only merged to the sender-instance cacheex_lg_only_tab values<br />
<br />
if cacheex_lg_only_remote_settings @oscam.conf is enabled, the user/reader-settings are ignored.<br />
if cacheex_lg_only_remote_settings @oscam.conf is disabled, the user/reader-settings are used.<br />
<br />
cacheex_lg_only_remote_settings = 0|1 (default: 0 /opt-out)<br />
<br />
==== cacheex_localgenerated_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are flagged as localgenerated<br />
<br />
cacheex_localgenerated_only = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_lg_only_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are lg-flagged for these list of caid/provid(s)<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
==== cacheex_localgenerated_only_in ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
drop incoming CWs which are NOT flagged as localgenerated<br />
<br />
cacheex_localgenerated_only_in = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_lg_only_in_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
allow incoming CWs only if they are lg-flagged for these list of caid/provid(s)<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_in_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
==== cacheex_lg_only_in_aio_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
use drop lg-only settings (cacheex_localgenerated_only_in & cacheex_lg_only_in_tab) only if peer is detected as cx-aio-patched or svn >= 11588<br />
<br />
cacheex_lg_only_in_aio_only = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_cw_check_for_push ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
push only when cacheex_cw_check counter reached<br />
localgenerated-flagged CWs are always pushed out<br />
<br />
cacheex_cw_check_for_push = 0|1 (default: 0 /opt-in)<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID;CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830;098C:000000<br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password provided by peer (4 bytes, 8 hex chars)<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these CAIDs.<br />
'''Attention: The CAID filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 5<br />
<br />
<br/><br />
<br />
===== force_remm =====<br />
{{Optional/en}}<br />
<br />
Force remote emm <br />
<br />
force_remm = 0|1|... , default = 0 (disabled)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''use only to activate a card or if card entitlements are expired'''<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to be send into gbox network<br />
<br />
cccam_reshare = level default = -1<br />
<br />
cccam_reshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer plus next level<br />
= x # resharing for direct peer plus x share level<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13565
OSCam/en/Config/oscam.server
2021-03-02T12:20:37Z
<p>Felixka: /* gbox_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident = <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
==== cacheex_maxhop_lg ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
define a maxhop for lg-flagged cws for push/receive, to allow a higher maxhop than for non-flagged cws<br />
<br />
cacheex_maxhop_lg = 0 (default) use value of cacheex_maxhop<br />
= 1 to 10 = set maxhop (if value is lower than cacheex_maxhop, value of cacheex_maxhop is used)<br />
<br />
==== cacheex_allow_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
set maxhop-settings remote, if remote reader/user has cacheex_allow_maxhop = 1 (default: 0 /opt-in)<br />
<br />
cacheex_allow_maxhop = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_nopushafter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
don't forward CWs from local/proxy-reader via CacheEx, if the defined time_in_ms for the CAID is reached<br />
<br />
cacheex_nopushafter = CAID:time_in_ms[,n]<br />
<br />
==== cacheex_lg_only_remote_settings ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
possibility to deny cacheex-receiver/client(cx2: user / cx3: reader) to overwrite the following settings @ cacheex-sending-instance<br />
cacheex_localgenerated_only<br />
cacheex_lg_only_tab<br />
<br />
it makes sense if you want to force your local settings.<br />
if the user/reader isnt allowed to overwrite your values, <br />
* it is still possible for the cacheex-receiver to set cacheex_localgenerated_only=1, if the user/reader define cacheex_localgenerated_only_in=1 ; but it is only @ cacheex-sending-instance possible to disable it<br />
* it is still possible for the cacheex-receiver to add cacheex_lg_only_tab, if the user/reader define cacheex_lg_only_in_tab=1234,1337 ; but it is only merged to the sender-instance cacheex_lg_only_tab values<br />
<br />
if cacheex_lg_only_remote_settings @oscam.conf is enabled, the user/reader-settings are ignored.<br />
if cacheex_lg_only_remote_settings @oscam.conf is disabled, the user/reader-settings are used.<br />
<br />
cacheex_lg_only_remote_settings = 0|1 (default: 0 /opt-out)<br />
<br />
==== cacheex_localgenerated_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are flagged as localgenerated<br />
<br />
cacheex_localgenerated_only = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_lg_only_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are lg-flagged for these list of caid/provid(s)<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
==== cacheex_localgenerated_only_in ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
drop incoming CWs which are NOT flagged as localgenerated<br />
<br />
cacheex_localgenerated_only_in = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_lg_only_in_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
allow incoming CWs only if they are lg-flagged for these list of caid/provid(s)<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_in_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
==== cacheex_lg_only_in_aio_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
use drop lg-only settings (cacheex_localgenerated_only_in & cacheex_lg_only_in_tab) only if peer is detected as cx-aio-patched or svn >= 11588<br />
<br />
cacheex_lg_only_in_aio_only = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_cw_check_for_push ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
push only when cacheex_cw_check counter reached<br />
localgenerated-flagged CWs are always pushed out<br />
<br />
cacheex_cw_check_for_push = 0|1 (default: 0 /opt-in)<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID;CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830;098C:000000<br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password provided by peer (4 bytes, 8 hex chars)<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these CAIDs.<br />
'''Attention: The CAID filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|8 , default = 2, max = 8<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 5<br />
<br />
<br/><br />
<br />
===== force_remm =====<br />
{{Optional/en}}<br />
<br />
Force remote emm <br />
<br />
force_remm = 0|1|... , default = 0 (disabled)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''use only to activate a card or if card entitlements are expired'''<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to be send into gbox network<br />
<br />
cccam_reshare = level default = -1<br />
<br />
cccam_reshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer plus next level<br />
= x # resharing for direct peer plus x share level<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13564
OSCam/en/Config/oscam.server
2020-11-12T20:41:10Z
<p>Felixka: /* cccam_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident = <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
==== cacheex_maxhop_lg ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
define a maxhop for lg-flagged cws for push/receive, to allow a higher maxhop than for non-flagged cws<br />
<br />
cacheex_maxhop_lg = 0 (default) use value of cacheex_maxhop<br />
= 1 to 10 = set maxhop (if value is lower than cacheex_maxhop, value of cacheex_maxhop is used)<br />
<br />
==== cacheex_allow_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
set maxhop-settings remote, if remote reader/user has cacheex_allow_maxhop = 1 (default: 0 /opt-in)<br />
<br />
cacheex_allow_maxhop = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_nopushafter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
don't forward CWs from local/proxy-reader via CacheEx, if the defined time_in_ms for the CAID is reached<br />
<br />
cacheex_nopushafter = CAID:time_in_ms[,n]<br />
<br />
==== cacheex_lg_only_remote_settings ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
possibility to deny cacheex-receiver/client(cx2: user / cx3: reader) to overwrite the following settings @ cacheex-sending-instance<br />
cacheex_localgenerated_only<br />
cacheex_lg_only_tab<br />
<br />
it makes sense if you want to force your local settings.<br />
if the user/reader isnt allowed to overwrite your values, <br />
* it is still possible for the cacheex-receiver to set cacheex_localgenerated_only=1, if the user/reader define cacheex_localgenerated_only_in=1 ; but it is only @ cacheex-sending-instance possible to disable it<br />
* it is still possible for the cacheex-receiver to add cacheex_lg_only_tab, if the user/reader define cacheex_lg_only_in_tab=1234,1337 ; but it is only merged to the sender-instance cacheex_lg_only_tab values<br />
<br />
if cacheex_lg_only_remote_settings @oscam.conf is enabled, the user/reader-settings are ignored.<br />
if cacheex_lg_only_remote_settings @oscam.conf is disabled, the user/reader-settings are used.<br />
<br />
cacheex_lg_only_remote_settings = 0|1 (default: 0 /opt-out)<br />
<br />
==== cacheex_localgenerated_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are flagged as localgenerated<br />
<br />
cacheex_localgenerated_only = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_lg_only_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are lg-flagged for these list of caid/provid(s)<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
==== cacheex_localgenerated_only_in ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
drop incoming CWs which are NOT flagged as localgenerated<br />
<br />
cacheex_localgenerated_only_in = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_lg_only_in_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
allow incoming CWs only if they are lg-flagged for these list of caid/provid(s)<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_in_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
==== cacheex_lg_only_in_aio_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
use drop lg-only settings (cacheex_localgenerated_only_in & cacheex_lg_only_in_tab) only if peer is detected as cx-aio-patched or svn >= 11588<br />
<br />
cacheex_lg_only_in_aio_only = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_cw_check_for_push ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
push only when cacheex_cw_check counter reached<br />
localgenerated-flagged CWs are always pushed out<br />
<br />
cacheex_cw_check_for_push = 0|1 (default: 0 /opt-in)<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID;CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830;098C:000000<br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password provided by peer (4 bytes, 8 hex chars)<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these CAIDs.<br />
'''Attention: The CAID filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 5<br />
<br />
<br/><br />
<br />
===== force_remm =====<br />
{{Optional/en}}<br />
<br />
Force remote emm <br />
<br />
force_remm = 0|1|... , default = 0 (disabled)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''use only to activate a card or if card entitlements are expired'''<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to be send into gbox network<br />
<br />
cccam_reshare = level default = -1<br />
<br />
cccam_reshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer plus next level<br />
= x # resharing for direct peer plus x share level<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.server&diff=13563
OSCam/de/Config/oscam.server
2020-11-10T17:22:42Z
<p>Felixka: /* ident */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.server''' ==<br />
Diese Konfigurationsdatei enthält Reader-Parameter für OSCam. Die Abschnitte dürfen sich wiederholen (mehr als ein Reader möglich). Es muss aber in jedem Fall mindestens ein reader konfiguriert sein!<br />
<br />
Beispiel-Konfiguration für die wichtigsten Reader sind hier zu finden [[OSCam/de/examples/Reader|Beispiel-Konfigurationen]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
<br />
=== '''Reader''' ===<br />
'''Grundsatz:''' Es können mehrere [reader]-Abschnitte erstellt werden. Jeder vollständige Abschnitt wird dann als Reader verwendet. Er '''muss''' immer mit [reader] beginnen. Im Parameter "label" kann dann die Art des Readers beschrieben werden:<br />
<br />
Beispiele: easymouse, phönix, smargo, sc8in1 usw.<br />
<br />
<br />
==== label ====<br />
{{Mandatory}}<br />
<br />
Legt den Namen für diesen Reader fest.<br />
<br />
'''Der Name des Labels darf nicht identisch zu einem Usernamen (oscam.users) sein!'''<br />
<br />
<br />
Beispiel<br />
label = easymouse2<br />
<br />
<br />
==== enable ====<br />
{{Optional}}<br />
Reader aktivieren/deaktivieren<br />
enable = 0 # Reader aus<br />
= 1 # Reader ein (default)<br />
<br />
==== description ====<br />
{{Optional}}<br />
description = Text <br />
<br />
Beliebiger Text zur Beschreibung des readers; default: [blank] keine Beschreibung<br />
<br />
'''Nicht zu verwechseln mit ''label''!''' Hier kann zusätzlich eine Information hinterlegt werden, z.B. Reader nur für CI+ usw.<br />
<br />
<br />
==== protocol ====<br />
{{Mandatory}}<br />
Kommunikationsprotokoll für den Reader.<br />
protocol = mouse # (Lokaler Cardreader)<br />
= internal # (Alle Cardreader mit einem "Device=/dev/sciX", sowie interne Coolstream-Reader)<br />
= camd35|cs357x # (Cascading - camd 3.5-kompatibler Remote-Server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x # (camd 3.5-kompatibler Remote-Server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1 # (SC8in1 und MCR 4/8 Cardreader)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''smartreader:''' Es können Probleme auftreten, wenn der Cardreader im smartreader-Modus in einem USB-Hub betrieben wird.<br />
In diesem Fall den Cardreader direkt am PC/Receiver einstecken und erneut testen.<br />
Sollte es dann funktionieren, ggf. einen anderen USB-Hub besorgen.<br />
<br />
<br />
==== device ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8911:09/10/2013</span><br />
<br />
Legt den local oder remote reader Abschnitt [reader] fest:<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw <br />
<br />
Bestimmt den reader type:<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3 <br />
bus:device: Bus- und Device-Namen von Smartreader+ oder Infinity USB (mit lsusb 'Bus' und 'Device' holen)<br />
serialnum: Serial-Nummer des Smartreader+ oder Infinity USB<br />
device: Name der Device<br />
device:slot: device name und slot-nummer '''für sc8in1''' (1-8)<br />
'''Es wird nur ein SC8in1 unterstützt!'''<br />
ip|hostname: IP-Adresse oder Hostname<br />
port: TCP/IP port <br />
lport: Remapping für den Local-Port (TCP/IP)<br />
PCSC: Nummer des PCSC-Readers (mit 0 starten!)<br />
Alternativ kann über den Namen des Readers (bzw. einen Teil davon) selektiert werden, z.B. "-1:SCR 3310" (Namen der erkannten Reader werden bei "oscam -d 32" ausgegeben)<br />
0|1: '''Nur für die Coolstream HD-1''' (Reader 0 oder 1 auswählen)<br />
constantcw: Dateiname für das Constant-CW-File<br />
<br />
Format des CW-Files: <br />
'''Standard-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
Beispiele für device--parameter:<br />
device = /dev/ttyS0 # Reader an COM1 (bei Linux i386 und Windows)<br />
device = /dev/tts/1 # Reader an COM2 (Linux dbox2 mit multicam)<br />
device = /dev/ttyUSB0 # Reader an USB (Linux i386)<br />
device = Serial:Reader 1 # z.B. Smargo im smartreader-Modus, wobei die Kennung "Reader 1" der Smargo-Konfiguration zu entnehmen ist!<br />
device = /var/keys/constant.cw # Einbindung eines constantcw<br />
device = /dev/ttyUSB0:1 # Slot 1 eines SC8in1 oder MCR 4/8 (Linux i386)<br />
<br />
'''Hinweis:''' Der Zähler für die Device liegt immer um 1 hinter der Nummer des COM-Ports! Also ttyS0 = COM1, tts/1 = COM2. Bei Benutzung neuerer PC sind kaum noch serielle Anschlüsse vorhanden, sodass in diesen Fällen USB 2.0 benutzt werden muss. Hier am besten im Gerätemanager des PC nachschauen, welcher COM-Port dem Reader zugewiesen wurde und in die Device den Port -1 eintragen!<br />
<br />
==== detect ====<br />
{{Depends}}<br />
Der Card Status (Karte im Reader eingeführt oder entfernt) wird detektiert mit Hilfe einer handshake input Leitung der seriellen Schnittstelle (UART/SCI) - cd, cts, dsr oder ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" bedeutet: Keine Leitung zum detektieren des Card Status vorhanden. Karte wird immer als im Kartenleser gesteckt erkannt.<br />
<br />
* Falls das detect signal invertiert ist: prefix "!" (eg "detect = !cts")<br />
<br />
<br />
Falls Parameter '''use_gpio = 1''' gesetzt ist:<br />
<br />
detect = gpio1...gpio7 - Card Status wird über einen gpio erfasst. GPIO means "general purpose input output". <br />
<br />
<br />
Beispiel:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
'''protocol = mouse'''<br />
'''device = /dev/ttyUSB0''' (easymouse 2)<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends}}<br />
Benutze gpio als card detect/ reset. Siehe auch '''detect ='''<br />
use_gpio = 0|1 #default = 0<br />
<br />
==== cardmhz ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
'''Standard'''-Frequenz der Karte in Schritten von 10 KHz. Für Irdeto-Karten z.B. "cardmhz = 600" (6 Mhz)<br />
<br />
Beispiel:<br />
cardmhz = 600 # Irdetokarte<br />
= # [blank] Default-Wert 357<br />
<br />
'''Interne-Dreambox-Leser'''<br />
<br />
Wenn cardmhz >2000 eingetragen wird aktiviert OScam den PLL-Clock. Interne-Dreambox-Leser (Dream Multimedia GmbH und Clones) können damit optimal getaktet werden.<br />
<br />
Der verwendete cardmhz-wert entspricht dem höchsten PLL-Takt. OSCam wird dann den optimalen PLL-Teiler berechnen damit die Frequenz möglichst nahe an den Wert kommt welcher bei "mhz" definiert wurde.<br />
<br />
Benutze die folgenden Einstellungen:<br />
<br />
Modelle mit PPC-CPU (DM500/DM600/DM7000/DM7020): "cardmhz = 3150"<br />
<br />
Modelle mit MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.): "cardmhz = 2700"<br />
<br />
Die DM7025 ist speziell: "cardmhz = 8300"<br />
<br />
'''Wird nur der Parameter cardmhz gesetzt (ohne mhz = xxx) wird die Karte automatisch anhand des ATR getaktet!'''<br />
<br />
Beispiel:<br />
Du hast eine Dream 800 HD PVR, das ist eine MIPS, daher muss du "cardmhz = 2700" setzen. Nehmen wir an du hast eine Nagra-Karte welche auf 5 MHz laufen soll.<br />
Wenn du die Karte richtig takten willst verwende "cardmhz = 2700" und "mhz = 500", Oscam taktet die Karte dann mit der nächst möglichen Frequenz (4.50 Mhz).<br />
Möchtest du sie übertakten, dann verwende "cardmhz = 2700" und z.B. "mhz = 900".<br />
Deine Karte läuft nun auf 9 Mhz. Aber vorsichtig, eine übertaktete Karte kann heiss und instabil werden! ([[OSCam/de/examples/Overclocking|Overclocking]] beachten!)<br />
<br />
Viele Interne-Leser von anderen Herstellern als Dream ignorieren die eingestellten Werte! Aber du solltest "cardmhz" und mhz" trotzdem setzen da es zum berechnen der richtigen "timings" verwendet wird. Wenn du cardmhz/mhz richtig setzt ist das "timing" besser für die aktuelle (automatisch gesetzte) Frequenz des Internen-Lesers. Als Ergebnis bekommst du bessere ECM-Zeiten oder mehr Stabilität.<br />
<br />
Erwarte keine Wunder, nur ein übertakten der Karte bringt bessere ECM-Zeiten. Schlechtes "timing" kann jedoch zu verzögerungen führen oder die Karte instabil machen.<br />
<br />
'''Nützliche Links:'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|Liste verschiedener Karten und ihren Frequenzen]]'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
==== mhz ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
mhz = Frequenz in KHz<br />
<br />
Sofern dies technisch möglich ist kann abweichend von '''cardmhz''' die Frequenz des Kartenlesers anders (in der Regel höher) als die Standard-Frequenz der Karte eingestellt werden (in 10 KHz-Schritten). Man spricht dann von [[OSCam/de/examples/Overclocking|Overclocking]]. So kann z.B. eine S02-Karte (Standard 6 MHz) mit 10 MHz übertaktet werden.<br />
<br />
Beispiel Externe-Reader:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
Beispiel DM800:<br />
cardmhz = 2700 # (27MHz PLL)<br />
mhz = 900 # (Wert wird berechnet -> 27Mhz : 3 = 9 Mhz)<br />
<br />
Hier eine ausführlichere Beschreibung von '''stefansat''' aus der Distri-Doku:<br />
<br />
Wenn die Frequenz in '''mhz''' größer ist als in '''cardmhz''', dann befindest Du dich im [[OSCam/de/examples/Overclocking|Overclocking]] Modus.<br />
<br />
Smargo-Reader und interne Reader der Dreamboxen werden durch den '''ATR''' automatisch eingestellt, wenn '''autospeed = 1''' (siehe nächsten Parameter) gesetzt ist.<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
<br />
==== autospeed ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
1 = setzt den mhz-Wert anhand des ATR (default)<br />
0 = disabled<br />
<br />
<br />
==== deprecated ====<br />
{{Optional}}<br />
Zuerst wird die Smartcard im Normal-Modus initialisiert. Schlägt dies fehl, wird die Initialisierung automatisch auf den veralteten Modus umgeschaltet, so dass die Smartcard-Geschwindigkeit nicht verändert wird und die Kommunikation auf normaler ATR Geschwindigkeit von 9600 Baud bleibt.<br />
deprecated = 1 # ausschließlich veralteter Modus<br />
= 0 # default<br />
<br />
<br />
==== mode ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Nur für AZBox'''<br />
<br />
mode = 1 # AzBox-Reader<br />
= 0 # default<br />
Setzt den Init-Mode für die Karte im internen AZBox-reader<br />
<br />
<br />
==== device_out_endpoint ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8013:12/29/2012</span><br />
<br />
Setzt die Addresse des Endpunkts für FTDI-Chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
<br />
==== smargopatch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet den workaround für smargoreader+ und reader ein, bis der native mode funktioniert<br />
smargopatch = 1<br />
= 0 (default)<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet fix für SC8in1/MCR DTR/RTS kernel bug ein<br />
sc8in1_dtrrts_patch = 1<br />
= 0 # (default)<br />
<br />
<br />
==== cool_timeout_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6286:01/23/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Setzt beim init der SC einen timeout in Millisekunden fest (im internen Reader).<br />
cool_timeout_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Hier kann ein timeout der SC für read/transmit nach dem init in Millisekunden festgelegt werden (nur für interne Reader).<br />
cool_timeout_after_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9568:03/16/2014</span><br />
<br />
Fügt einen Controll-Check für Pin Payload von NDS Videoguard Karten hinzu (4 Hex-Bytes). '''Gültig nur für physikalische Reader'''<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
<br />
==== ins7e ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5959:09/22/2011</span><br />
<br />
Füge 26 hex-bytes payload für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e = payload<br />
= # [blank] default (none)<br />
<br />
<br />
==== ins7e11 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6064:12/06/2011</span><br />
<br />
Füge TA1 für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e11 = TA1 Byte<br />
= # [blank] default (none)<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
<br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9884:09/30/2014</span><br />
{{Optional}}<br />
schaltet den 0x07-EMM-Fix für NDS Videoguard 2 Karten ein. '''Gültig nur für physikalische Reader'''<br />
fix07 = 1 # 0x07-EMM-Fix eingeschaltet (default)<br />
= 0 # ausgeschaltet <br />
<br />
<br />
==== force_irdeto ====<br />
{{Optional}}<br />
Forciert den Irdeto-Modus, auch wenn ein RSA-Key für Irdeto getunnelte Nagravisions-Karte vorliegt.<br />
force_irdeto = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
==== nagra_read ====<br />
{{Optional}}<br />
Lese Nagravision-Records. '''Nur für NCMED-Karten'''<br />
nagra_read = 0 # ausgeschaltet (default)<br />
= 1 # lese alle Records mit abgelaufenen Rechten<br />
= 2 # lese nur Records mit gültigen Rechten<br />
<br />
<br />
==== rsakey ====<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7046:06/12/12</span><br />
{{Optional}}<br />
<br />
RSA key für Nagravision/Tiger SCs / CAM key data für Irdeto SCs, Conax SCs<br />
rsakey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== fix9993 ====<br />
{{Optional}}<br />
fix9993 = 0|1<br />
<br />
Fixed den error 9993 bei CAID 0919 SC's<br />
<br />
fix9993 = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== readtiers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
Methode wie die Tiers von NDS Videoguard Smartcards ausgelesen werden.<br />
<br />
readtiers = 0 # ausgeschaltet (default)<br />
readtiers = 1 # ins70 (neue) Methode <br />
readtiers = 2 # ins76 (alte) Methode <br />
<br />
==== boxkey ====<br />
{{Optional}}<br />
Boxkey für Nagravision SCs / CAM key für Irdeto SCs<br />
boxkey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== pincode ====<br />
{{Optional}}<br />
Pincode für '''Conax-, Cryptoworks- und Viaccess-''' Karten.<br />
pincode = code<br />
= # [blank] default<br />
<br />
<br />
==== boxid ====<br />
{{Optional}}<br />
ID der '''NDS-Reciever-Box'''<br />
boxid = NDS box ID<br />
= # [blank] default<br />
<br />
<br />
==== ndsversion ====<br />
{{Optional}}<br />
Version von '''NDS Videoguard''' einsetzen<br />
ndsversion = 0 # autodetection (default)<br />
ndsversion = 1 # NDS Videoguard 1<br />
ndsversion = 12 # NDS Videoguard 1+<br />
ndsversion = 2 # NDS Videoguard 2<br />
<br />
<br />
==== aeskeys ====<br />
{{Optional}}<br />
Multiple AES-Keys für '''Viacces-Karten'''<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
Spezial AES Keys:<br />
00 = schicke keine CW zurück, es ist kein AES-Key spezifiziert<br />
FF = schicke CW zurück, die vom S empfangen wurden, es ist kein AES-Key spezifiziert<br />
<br />
Beispiel<br />
aeskeys = 0100@012345:000102030405060708090a0b0c0d0e0f;0200@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6624;04/23/2012</span><br />
{{Optional}}<br />
Anzahl der Subscritions-Klassen für '''Viacces'''<br />
schowcls = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== key ====<br />
{{Depends}}<br />
Key für Newcamd remote reader encription<br />
key = DES key<br />
<br />
<br />
==== user ====<br />
{{Optional}}<br />
Username für Remote-Reader.<br />
<br />
Beispiel<br />
user = # xyxyx<br />
<br />
<br />
==== password ====<br />
{{Optional}}<br />
Passwort für Remote-Reader.<br />
<br />
Beispiel<br />
password = # xyxyx<br />
<br />
<br />
==== mg-encrypted ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO</span><br />
<br />
mgcamd encrypted line für '''GBox!'''<br />
<br />
Format:<br />
<br />
mg-encrypted = D: { <IP|hostname> { <local port> <remote port> { <password> { <level> <level> }}}}[,<local MAC address>] # default MAC address=eth0<br />
<br />
default:<br />
mg-encrypted = # [blank] (none)<br />
<br />
<br />
==== services ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' <br />
<br />
Wenn Loadbalancing aktiviert ist, sind folgende Besonderheiten zu berücksichtigen:<br />
* Services sind für den Loadbalancer eine '''Whitelist'''. Das bedeutet, dass alles, was hier eingetragen wird, vom Loadbalancing als Service behandelt wird, den die Karte '''kann'''! Wenn dann z.B. ein "not found" kommt, wird das ignoriert und die Karte wird weiter angefragt, mit dem damit verbundenen traffic!<br />
* Daraus ergibt sich, dass der Eintrag von Services bei '''lokalen''' Karten und Proxies, '''die man genau kennt''', kein Problem darstellt.<br />
* Anders verhält es sich bei Proxies (z.B. CCcam), deren Services '''man nicht kennt'''. Hier ist davon abzuraten, Services einzutragen. In einem solchen Fall sollten vielmehr die Services bestimmt werden, die '''nicht zu berücksichtigen''' sind (Eintrag mit (!)), oder besser eine Filterung über den Parameter '''caid''' erfolgen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Die Anzahl der services, die je reader berücksichtigt werden, ist auf 64 begrenzt, also 64 mal [[service-name][CAID][provid][srvid]]! <br />
<br />
Welche Services kann der Reader. Hierzu muss eine oscam.services vorhanden sein. Die Logik ist hier folgendermaßen (in der angegebenen Reihenfolge):<br />
* Wenn das Feld leer ist (oder ungültig) wird die Anfrage erlaubt.<br />
* Wenn ein negativer Service (also solche mit "!") zutreffend ist, so wird die Anfrage abgewiesen.<br />
* Wenn ein positiver Service zutreffend ist oder es gar keinen positiven Service gibt, so wird die Anfrage erlaubt.<br />
* Wenn keiner der vorigen Punkte zutrifft, so wird die Anfrage abgewiesen.<br />
Dies bedeutet, dass negative Services nur in Einzelfällen nötig sind. Nämlich genau dann, wenn man positive Services hat, davon aber wieder einige ausnehmen will. Dies wird nicht empfohlen, da es hier schnell zu Fehlkonfigurationen kommt. Stattdessen sollte ein zusätzlicher Service angelegt werden, der alle entsprechenden Sender enthält.<br />
services = [!]services[,[!]<services>]...<br />
= [blank] ist default<br />
<br />
Beispiel<br />
services = skywelt,skyweltextra,!skyfilm<br />
# skywelt und skywelt extra sind zugeordnet, skyfilm ist ausgeschlossen<br />
<br />
<br />
==== caid ====<br />
{{Optional}}<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
definiert und mapped CAIDs für Reader<br />
<br />
Beispiele:<br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut für das Beispiel oben)<br />
default: alle CAIDs mit der Maske FFFF<br />
<br />
<br />
==== ident ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Wenn in oscam.conf [global] unter lb_mode loadbalancing aktiviert ist, dann dürfen hier keine Einträge stehen!<br />
<br />
Definiert CAID und Ident '''kartenspezifisch''' für den Reader:<br />
ident = <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Beispiel<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] Keine Definition (default)<br />
<br />
==== class ====<br />
{{Optional}}<br />
Definiert Class '''in hexadecimal''' kartenspezifisch für den Reader:<br />
class = 01,02,!1b,!2b # 01 und 01 ja, 1b und 2b nein<br />
= # [blank] Keine Definition (default)<br />
<br />
<br />
==== chid ====<br />
{{Optional}}<br />
Definiert '''Irdeto'''-ChID für den Reader.<br />
<br />
Beispiel<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
<br />
==== group ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6103:12/21/2011</span><br />
<br />
Jeder Reader muss in einer oder mehrere Gruppen eingetragen sein. Damit lässt sich bestimmen, welcher Client auf welchen Reader Zugriff hat. Gültige Werte 1-64<br />
group = 1....64[,1....64]....<br />
<br />
'''Da ein Eintrag zwingend ist, darf hier kein [blank] als default stehen!'''<br />
<br />
Beispiel<br />
Group = 1 # (eine Gruppe)<br />
Group = 1,4,5 # (mehrere Gruppen)<br />
<br />
<br />
==== audisabled ====<br />
{{Optional}}<br />
Schließt den Reader vom AU (Auto-Updating) aus<br />
audisabled = 1 # ausgeschlossen<br />
= 0 # nicht ausgeschlossen (default)<br />
<br />
<br />
==== auprovid ====<br />
{{Optional}}<br />
Hier kann die Provider-ID festgelegt werden, damit der richtige Reader für das AU zur Verfügung steht<br />
<br />
Beispiel<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
<br />
==== disableserverfilter ====<br />
{{Optional}}<br />
Ignoriert CAID und Ident-Einstellungen des Readers bei fehlerhaften Clients.<br />
disableserverfilter = 1 # ignoriert<br />
= 0 # ignoriert nicht (default)<br />
<br />
<br />
==== inactivitytimeout ====<br />
{{Depends}}<br />
Für alle TCP-basierende remote Reader<br />
<br />
inactivitytimeout = # in Sekunden<br />
= -1 # Verbindet '''newcamd''' basierende Reader bei einem Netzwerkausfall erneut (auch im Leelauf - idle -)<br />
= 0 # default<br />
<br />
<br />
==== reconnecttimeout ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7244:08/07/2012</span><br />
<br />
Zeitspanne in Sekunden für eine Wiederverbindung mit einem Remote-Reader, wenn Antworten ausbleiben<br />
<br />
Beispiel<br />
reconnecttimeout = 20 # Nach 20 Sekunden ohne Antworten wird wiederverbunden<br />
= # [blank] default 30 Sekunden<br />
<br />
<br />
==== connectoninit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = Ermöglicht die Herstellung einer Newcamd-Verbindung, solange noch kein Request vorliegt<br />
0 = default<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = ermöglicht es einem cs378x TCP socket, ständig verbunden zu sein<br />
0 = Immer eingeschaltet bei einem cacheex reader type (default)<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Definiert diesen Reader als Fallback. Standard- und Fallback-Reader müssen in der selben Gruppe sein. Siehe '''group'''!<br />
fallback = 1 # Fallbackreader<br />
= 0 # Kein Fallbackreader (default)<br />
<br />
'''Info:'''<br />
<br />
Ist Loadbalancing aktiviert, und zusätzlich der Parameter "cwcycle_allowbadfromffb = 1", wird dieser Reader ein fixed Fallback für CacheEx.<br />
Somit wird er verwendet wenn ein Bad Cycle erkannt wird, damit freetzer entsprechend verhindert werden können.<br />
--> siehe [[OSCam/de/Config/oscam.conf#cwcycle_allowbadfromffb|cwcycle_allowbadfromffb]]<br />
<br />
<br />
==== fallback_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
Benutze den Reader nur als fallback für vorher definierte CAIDs, two-digit wildcards sind möglich. Dieser Parameter überschreibt den Parameter fallback!<br />
Default = none<br />
<br />
Beispiel:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional}}<br />
Definition des EMM-Caches für den Reader. Derzeit nur für lokale Reader. Betrifft die AU-Funktion. Damit kann entschieden werden, ob Update-Kommandos (EMM) vom Provider immer oder nur unter bestimmten Voraussetzungen geschrieben werden.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
Ohne diesen Parameter werden keine EMM im Log angezeigt!<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # cache/stats aus (default)<br />
* <usecache> 1 = # cache/stats ein und schreibe sie in eine Datei wenn oscam beendet wird<br />
* <usecache> 2 = # cache/stats ein, aber schreibe sie beim beenden von oscam <ins>nicht</ins> in eine Datei<br />
<br />
* <rewrite> n = # Wie oft ein und das selbe Update-Kommando (EMM) geschrieben wird. ''Gilt nur bei <usecache> = 1 oder 2''<br />
<br />
* <logging> 0 = # Einträge im Logfile ausgeschaltet (default)<br />
* <logging> 1 = # Nur fehlerhafte EMM werden geloggt<br />
* <logging> 2 = # die geschriebenen (written) EMM werden geloggt<br />
* <logging> 4 = # die zurückgewiesenen (skipped) EMM werden geloggt<br />
* <logging> 8 = # die blockierten (blocked) EMM werden geloggt<br />
* <logging> 16 = # disabled AU werden geloggt<br />
Aufsummieren der Werte ist möglich, 31 wird also alle loggen.<br />
<br />
* <stb-emm> 0 = # EMM für die STB werden ignoriert (default)<br />
* <stb-emm> 1 = # EMM für die STB werden zum Reader gesendet (nur sehr spezifisch nötig)<br />
<br />
Beispiele:<br />
emmcache = 1,3,10,0 # Cache ein, 3 x schreiben, die geschriebenen (2) und die geblockten (8) = 10 loggen, keine stb-emm senden<br />
emmcache = 1,2,6,1 # Cache ein, 2 x schreiben, die geschriebenen (2) und die zurückgewiesenen (4) = 6 loggen, stb-emm senden<br />
<br />
'''stb-emm''': ist nur für einige Viaccess-User sinnvoll (siehe Commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) und '''bestimmt nicht für User mit einer echten Karte im Reader'''.<br />
<br />
Dazu [http://www.streamboard.tv/wbb2/thread.php?postid=538345#post538345 noch ein Zitat vom User ''pr2'']: "In Viaccess sahen wir einige EMM-G, die für die Set-Top-Box(STB) waren und nicht für die Karte, deshalb nennen wir das STB-EMM. Diese EMMs setzen den Overencryption-Key (AES) in der STB für die Verschlüsselung der Kommunikation zwischen STB und Karte."<br />
<br />
<br />
==== emmreassembly ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8591:04/01/2013 Parameter jetzt in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = schaltet Neuaufbau von EMM ein, default<br />
0 = schaltet Neuaufbau von EMM aus<br />
<br />
Sollte bei '''Viaccess und Cryptoworks Readern''' gesetzt werden, wenn der Client, der für das Senden von EMMs benutzt wird, die EMMs neu aufbaut anstelle sie an OScam zur Bearbeitung zu senden.<br />
<br />
<br />
==== cacheex ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
cacheex = 1 # enable cache exchange pull mode<br />
cacheex = 2 # enable cache exchange push mode<br />
cacheex = 3 # enable cache exchange revers push mode<br />
cacheex = 0 # aus (default)<br />
<br />
Identische modes müssen bei local OSCam server und remote OSCam user account gesetzt werden!<br />
Nur für camd3.5x und CCcam Protokolle!<br />
<br />
Siehe auch entsprechenden Parameter in oscam.user!<br />
<br />
[[Datei:MessageS.png|text-bottom]]'''Ein ausführliches How-To findet man [[Streamboard-Post:406230|hier]]'''<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam A erhält eine ECM Anfrage, reader1 sendet diese Anfrage an OSCam B,<br />
<br />
OSCam B prüft seinen cache:<br />
* im cache wird nichts gefunden: OSCam B sendet: NOK<br />
* im cache wird etwas gefunden; OSCam B sendet: OK+CW<br />
* im cache wird nichts gefunden aber es wird eine anstehende Anfrage festgestellt: ''cacheexwaittime'' in oscam.conf [global] wird abgewartet und dann erneut geprüft. OSCam B fragt nicht mehr nach neuen EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 2<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 2<br />
<br />
Wenn OSCam B ein CW erhält, wird es auf OSCam A geschoben. Der Reader hat normale Funktionen und kann ECMs anfragen.<br />
* Problem: OSCAM kann nur dann CW's auf OSCam A schieben, wenn OSCam A verbunden ist<br />
* Problem oder feature?: OSCam A kann ECMs von OSCam B anfragen<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 ist gesetzt auf cacheex = 3<br />
<br />
Wenn OSCam A ein CW erhält, wird dies auf OSCam B geschoben. OSCam A fragt nicht mehr nach neuen ECMs<br />
<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = Anzahl der hops<br />
= default = 10<br />
<br />
Festlegen der maximalen hops für cache exchange. Zum pushen des lokalen caches 1 eintragen. Der Eintrag cacheex_maxhop = 0 bewirkt nur, dass der default-Wert von 10 genommen wird.<br />
<br />
<br />
==== logport ====<br />
{{Optional}}<br />
Logport für einen '''Camd 3.x'''-Reader. UDP muss aktiviert sein. Funktioniert nur, wenn in Camd 3.x kein Cascading stattfindet!<br />
logport = Port-Nummer<br />
= # kein Logport (default)<br />
<br />
<br />
==== ecmwhitelist ====<br />
{{Optional}}<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
definiert die gültige ECM-Länge in '''hex''' und provid für physische Reader<br />
<br />
Beispiel:<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = keine (default) und provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Im normalen Betrieb ist dieser Parameter nicht erforderlich!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|Liste mit ECM-Längen]]'''<br />
<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
Gültige ECM-Header mit CAID und provid '''in hex''' einsetzen.<br />
<br />
default: none, provid = 000000<br />
<br />
Ein Thread dazu ist [[Streamboard-Thread:34748|hier]] zu finden.<br />
<br />
Und hier findet man eine ständig gepflegte [[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] .<br />
<br />
<br />
==== ratelimitecm ====<br />
{{Optional}}<br />
Anzahl der unterschiedlichen SIDs die in ECMs innerhalb eines Intervalls erlaubt sind<br />
ratelimitecm = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = Anzahl<br />
<br />
Anzahl der ECM's mit "not found" Anwort bis der Reader neu gestartet wird, 0 = kein Limit (default)<br />
<br />
<br />
==== resetcycle ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5821:08/12/2011</span><br />
<br />
Anzahl von ECM's bis ein Reset des Cardreaders durchgeführt wird<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
resetcycle = 5 # Reset nach 5 ECM's<br />
= 0 # ausgeschaltet [default]<br />
<br />
<br />
==== ratelimittime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
Intervall für ein ratelimit<br />
ratelimittime = Millisekunden<br />
= 0 # (default)<br />
<br />
<br />
==== ecmunique ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = ermöglicht eine Überprüfung des matching ECM hash im ratelimit slot<br />
0 = default<br />
<br />
<br />
==== srvidholdtime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
srvidholdtime = Millisekunden<br />
<br />
Zeitraum, in dem die Service-ID im ratelimit slot gehalten werden soll. Während dieses Zeitraums ist der Zeit-Check für ecmunique ausgeschaltet. Default = 0<br />
<br />
<br />
==== cooldowndelay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5946:09/09/2011</span><br />
<br />
cooldowndelay <br />
<br />
Erläuterung:<br />
delay = Verzögerungszeit in Sekunden, in der dem Reader erlaubt ist, mehr ECM-Anfragen zu stellen,<br />
als im Parameter "ratelimitecm" festgelegt ist<br />
default: [blank] keine<br />
duration = Zeitdauer in Sekunden, die der Reader für einen cooldown benötigt<br />
default: [blank] keine<br />
<br />
'''Voraussetzung ist, dass die Parameter "ratelimitecm" und "ratelimittime" ausgefüllt sind!'''<br />
<br />
<br />
==== block and save ====<br />
Zur Thematik block, save, select und write EMM gibt es hier [[http://www.streamboard.tv/wiki/EMM]] ein besonderes Wiki!<br />
<br />
<br />
===== blocknano =====<br />
{{Optional}}<br />
Liste zu blockender EMM-Nanos (in hex) oder aller EMM-Nanos. Gilt nur für physikalische Reader!<br />
<br />
Beispiel<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
<br />
===== blockemm-u =====<br />
{{Optional}}<br />
''unique address-EMMs, entspricht D3 bei Sk*''<br />
blockemm-u = 1 # Blocke EMMs, die an die Karte direkt adressiert sind)<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-s =====<br />
{{Optional}}<br />
''shared address-EMMs, entspricht D2 bei Sk*''<br />
blockemm-s = 1 # Blocke EMMs, die an bestimmte Gruppen von Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-g =====<br />
{{Optional}}<br />
''global address-EMMs, entspricht D0 bei Sk*''<br />
blockemm-g = 1 # Blocke EMMs, die an alle Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-unknown =====<br />
{{Optional}}<br />
Blockiert alle unbekannten Arten von EMM<br />
blockemm-unknown = 1 # Blocke alle unbekannten Arten von EMMs<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-bylen =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8615:04/12/2013</span><br />
<br />
Blockiere alle Arten von EMMs anhand der Länge. Es werden maximal 10 Werte zugelassen.<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
= # [blank] keine Blockierung (default)<br />
<br />
Beispiel:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br />
===== via_emm_global =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9843:09/05/2014</span><br />
<br />
via_emm_global = 0|1<br />
<br />
ermöglicht die Filterung von globalen emm für '''viacces'''<br />
<br />
'''ausschließlich für camd35 (cs357x) Protokoll!'''<br />
<br />
0 = default<br />
<br />
<br />
===== saveemm-u =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unique-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-u = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-s =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere shared-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-s = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-g =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere global-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-g = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-unknown =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unknown-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-unknown = 1<br />
= 0 # (default)<br />
<br />
===== needsglobalfirst =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn11494:02/03/2019</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Nur für Cryptoworks Karten mit den CAIDs 0D96 & 0D98'''<br />
<br />
Ist der Parameter gesetzt, wird nur noch ein global EMM pro shared EMM geschrieben. Der Rest der global EMMs wird geblockt. Dazu darf das Schreiben der global und shared EMMs nicht generell geblockt sein. Also Vorrausetzung ist: blockemm-s = 0 und blockemm-g = 0.<br />
<br />
needsglobalfirst = 0|1 - 0 default<br />
<br />
Beispiel<br />
needsglobalfirst = 1<br />
blockemm-g = 0<br />
blockemm-s = 0<br />
<br />
===== savenano =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn5947:09/09/2011</span><br />
<br />
Liste von EMM-Nanos, die gespeichert werden sollen (hex) oder alle EMM-Nanos. Der Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
<br />
===== readnano =====<br />
{{Optional}}<br />
Schreibt ein File (üblicherweise eine Copy des von savenano gesicherten files) in die SC. Wenn kein Pfad angegeben ist, wird danach im Konfigurations-Verzeichnis gesucht. <br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
readnano = /var/oscam/write.emm # Beispiel Pfad/Dateiname<br />
= write.emm # Nur Dateiname<br />
= # [blank] es wird kein File geschrieben (default)<br />
<br />
<br />
==== use-ssl ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
use_ssl = 1 # benutze SSL für ghttp protocol<br />
= 0 # default<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # weise falsche CW's zurück, sende "not found" an Stelle falscher CWs<br />
= 0 # default<br />
<br />
Die Option hat nur eine Wirkung auf dem oscam Server (oscam.server, [reader]), der die Karte direkt anspricht, also nicht auf einem Client. Betroffene Karten: CSAT (0100:003311)<br />
<br />
<br />
==== disablecrccws ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6004:10/26/2011</span><br />
<br />
disablecrccws = 1 # unterdrücke den cw-checksum-test<br />
= 0 # cw-checksum-test eingeschaltet (default)<br />
<br />
Hier mal eine Erklärung von Bit aus dem SB:<br />
<br />
Das ist für den dänischen Provider BoxerTV.<br />
Die haben Gegenmassnahmen eingeleitet und die VIA Karten verdauen keine Checksum-korrigierten CWs mehr. Damit kann man die CW checksummenkorrektur bei diesen readern ausschalten.<br />
Dann geht's wieder bei BoxerTV-readern.<br />
(dropbadcws muss dann auf aus sein).<br />
...<br />
PS: die checksummenkorrektur ausschalten ist böse und entgegen des DVB-Standards! Benutzt diesen Parameter nur wenn Ihr ihn wirklich benötigt!<br />
<br />
====disablecrccws_only_for====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID<br />
<br />
Exemple :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
<br />
==== lb_weight ====<br />
{{Optional}}<br />
Je höher dieser Wert, desto größer ist die Wahrscheinlichkeit, dass dieser Reader ausgesucht wird. Es ist ein Indikator für die durchschnittliche Antwortzeit innerhalb des Loadbalancing<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
<br />
Abwärts die durchschnittliche Antwortzeit des Readers. Von rechts nach links der Wert lb_weight. <br />
Im Mittelfeld könnt Ihr ablesen, wie die durchschnittliche Antwortzeit durch den lb_weight wert "korrigiert" wird.<br />
<br />
<br />
'''Beispiel:'''<br />
<br />
Du hast 2 Reader die beide eine durchschnittliche Antwortzeit von 400ms haben. Nun möchtest Du aber einen Reader bevorzugen indem Du dem Loadbalancer 300ms vorgaukeln willst.<br />
<br />
Also suchst Du die Zeile die mit 400 beginnt und wanderst auf dieser Zeile nach rechts bis du bei ~300 (in der tabelle findest du nur 30cool bist. Dann liest Du oben den Wert für lb_value ab den der Reader bekommt (130). Diesen trägst Du bei dem Reader ein und schon wird der Reader bevorzugt<br />
<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional}}<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
Zuordnung von Services an den Reader, welche durch den Loadbalancer nie geblockt werden sollen, default=none<br /><br />
<br />
<br />
==== lb_force_fallback ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = setzt den Reader ständig in fallback-modus für das load balancing ohne Berücksichtigung der reader statistics,<br /><br />
0 = default<br />
<br />
<br />
==== ccc ====<br />
===== cccversion =====<br />
{{Depends}}<br />
'''Nur für CCcam'''<br />
<br />
Definiert die Version von CCcam, die verwendet werden soll.<br />
<nowiki><mainversion>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
cccversion = 1.2.34<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
===== cccmaxhops =====<br />
{{Depends}}<br />
Legt das Maximum an Distance-Hops für die Karte fest<br />
0 = Nur lokale Karte<br />
1 = Lokale Karte + 1 Hop<br />
2 = Lokale Karte + 2 Hops<br />
und so weiter<br />
Default-Wert = 10<br />
<br />
<br />
===== ccchop =====<br />
{{Depends}}<br />
ccchop = hop<br />
<br />
Setzt den hop für '''nicht'''-cccam-reader<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Definiert den reshare-hop für CCcam-Reader<br />
<br />
cccreshare = hop<br />
= -1 # kein reshare<br />
= 0 # reshare für direct peer <br />
= 1 # reshare für direct peer und den nächsten Level<br />
= x # reshare für direct peer und die nächsten x (Anzahl) Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
===== cccwantemu =====<br />
{{Depends}}<br />
Anfrage, auch einen emu vom CCcam-Server zu erhalten.<br />
cccwantemu = 1 # ja<br />
= 0 # nein default<br />
<br />
<br />
===== ccckeepalive =====<br />
{{Depends}}<br />
Sendet eine "keepalive-message", um eine Verbindung zum remote CCCam-Server zu erhalten.<br />
ccckeepalive = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
===== cccreconnect =====<br />
{{Optional}}<br />
cccreconnect = timeout (ms)<br />
<br />
default = 12000 (ms)<br />
<br />
Wiederverbindung nach ECM-Request-Timeout in Millisekunden.<br />
Gilt nur für O-cccam reader, für cccam-ext Protokoll wird diese Zeit ignoriert.<br />
<br />
<br />
===== cccmindown =====<br />
{{Depends}}<br />
cccmindown = # Zahl<br />
= 0 default<br />
<br />
Filtert alle Reader mit hops, die kleiner sind als die eingesetzte Zahl<br />
<br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBOX läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
===== device =====<br />
{{Mandatory}}<br />
device = Komma-separierte Liste mit den Werten<br />
<br />
peer's IP oder Hostname<br />
peer's port<br />
<br />
Beispiel:<br />
device = 192.168.1.101,3820<br />
<br />
<br />
===== password =====<br />
{{Mandatory}}<br />
password = 4 hex bytes, 8 chars<br />
<br />
Peer Passwort<br />
<br />
Beispiel:<br />
password = A123BCDE<br />
<br />
===== gbox_reshare =====<br />
{{Optional}}<br />
Reshare-Level für lokale Karte(n), default = 2<br />
<br />
===== gbox_max_distance =====<br />
{{Optional}}<br />
gbox_max_distance = maximale Distanz zum Empfang von peer-cards, default = 2<br />
<br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional}}<br />
gbox_max_ecm_send = sende ecm zu maximal n peer cards, default = 5<br />
<br />
===== user =====<br />
{{Mandatory}}<br />
Benutzername (client) der oscam Gbox<br />
<br />
Beispiel<br />
user = gbox_client<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
'''Der user muss auch in der oscam.user als [account] eingetragen werden.'''<br />
<br />
'''Man sollte unbedingt für jeden gbox [reader] einen anderen user [account] benutzen.'''<br />
'''Nur dann sind die Peers im Log usw unterscheidbar.'''<br />
<br />
'''Unter [reader] und [account] sollten geeignete Filter gesetzt werden (services=, caid=, ident=), um Instabilitäten der GBOX durch<br />
'''Überfluten mit Karten zu vermeiden.'''<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13562
OSCam/en/Config/oscam.server
2020-11-08T16:54:21Z
<p>Felixka: /* ident */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident = <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
==== cacheex_maxhop_lg ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
define a maxhop for lg-flagged cws for push/receive, to allow a higher maxhop than for non-flagged cws<br />
<br />
cacheex_maxhop_lg = 0 (default) use value of cacheex_maxhop<br />
= 1 to 10 = set maxhop (if value is lower than cacheex_maxhop, value of cacheex_maxhop is used)<br />
<br />
==== cacheex_allow_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
set maxhop-settings remote, if remote reader/user has cacheex_allow_maxhop = 1 (default: 0 /opt-in)<br />
<br />
cacheex_allow_maxhop = 0|1 (default: 0 /opt-in)<br />
<br />
<br />
==== cacheex_nopushafter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
don't forward CWs from local/proxy-reader via CacheEx, if the defined time_in_ms for the CAID is reached<br />
<br />
cacheex_nopushafter = CAID:time_in_ms[,n]<br />
<br />
==== cacheex_lg_only_remote_settings ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
possibility to deny cacheex-receiver/client(cx2: user / cx3: reader) to overwrite the following settings @ cacheex-sending-instance<br />
cacheex_localgenerated_only<br />
cacheex_lg_only_tab<br />
<br />
it makes sense if you want to force your local settings.<br />
if the user/reader isnt allowed to overwrite your values, <br />
* it is still possible for the cacheex-receiver to set cacheex_localgenerated_only=1, if the user/reader define cacheex_localgenerated_only_in=1 ; but it is only @ cacheex-sending-instance possible to disable it<br />
* it is still possible for the cacheex-receiver to add cacheex_lg_only_tab, if the user/reader define cacheex_lg_only_in_tab=1234,1337 ; but it is only merged to the sender-instance cacheex_lg_only_tab values<br />
<br />
if cacheex_lg_only_remote_settings @oscam.conf is enabled, the user/reader-settings are ignored.<br />
if cacheex_lg_only_remote_settings @oscam.conf is disabled, the user/reader-settings are used.<br />
<br />
cacheex_lg_only_remote_settings = 0|1 (default: 0 /opt-out)<br />
<br />
==== cacheex_localgenerated_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are flagged as localgenerated<br />
<br />
cacheex_localgenerated_only = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_lg_only_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
forward only CWs which are lg-flagged for these list of caid/provid(s)<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
==== cacheex_localgenerated_only_in ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
drop incoming CWs which are NOT flagged as localgenerated<br />
<br />
cacheex_localgenerated_only_in = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_lg_only_in_tab ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
allow incoming CWs only if they are lg-flagged for these list of caid/provid(s)<br />
<br />
if provid FFFFFE is set, all provids for this caid are valid!<br />
<br />
cacheex_lg_only_in_tab = caid1:provid1[,provid2];caid2:provid1;<br />
<br />
==== cacheex_lg_only_in_aio_only ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
use drop lg-only settings (cacheex_localgenerated_only_in & cacheex_lg_only_in_tab) only if peer is detected as cx-aio-patched or svn >= 11588<br />
<br />
cacheex_lg_only_in_aio_only = 0|1 (default: 0 /opt-in)<br />
<br />
==== cacheex_cw_check_for_push ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11588:08/23/20</span><br />
<br />
push only when cacheex_cw_check counter reached<br />
localgenerated-flagged CWs are always pushed out<br />
<br />
cacheex_cw_check_for_push = 0|1 (default: 0 /opt-in)<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID;CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830;098C:000000<br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password provided by peer (4 bytes, 8 hex chars)<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these CAIDs.<br />
'''Attention: The CAID filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 5<br />
<br />
<br/><br />
<br />
===== force_remm =====<br />
{{Optional/en}}<br />
<br />
Force remote emm <br />
<br />
force_remm = 0|1|... , default = 0 (disabled)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''use only to activate a card or if card entitlements are expired'''<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to be send into gbox network<br />
<br />
cccam_reshare = level default = -1<br />
<br />
cccam_reshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.server&diff=13536
OSCam/de/Config/oscam.server
2020-03-24T22:17:56Z
<p>Felixka: /* gbox_max_ecm_send */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.server''' ==<br />
Diese Konfigurationsdatei enthält Reader-Parameter für OSCam. Die Abschnitte dürfen sich wiederholen (mehr als ein Reader möglich). Es muss aber in jedem Fall mindestens ein reader konfiguriert sein!<br />
<br />
Beispiel-Konfiguration für die wichtigsten Reader sind hier zu finden [[OSCam/de/examples/Reader|Beispiel-Konfigurationen]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
<br />
=== '''Reader''' ===<br />
'''Grundsatz:''' Es können mehrere [reader]-Abschnitte erstellt werden. Jeder vollständige Abschnitt wird dann als Reader verwendet. Er '''muss''' immer mit [reader] beginnen. Im Parameter "label" kann dann die Art des Readers beschrieben werden:<br />
<br />
Beispiele: easymouse, phönix, smargo, sc8in1 usw.<br />
<br />
<br />
==== label ====<br />
{{Mandatory}}<br />
<br />
Legt den Namen für diesen Reader fest.<br />
<br />
'''Der Name des Labels darf nicht identisch zu einem Usernamen (oscam.users) sein!'''<br />
<br />
<br />
Beispiel<br />
label = easymouse2<br />
<br />
<br />
==== enable ====<br />
{{Optional}}<br />
Reader aktivieren/deaktivieren<br />
enable = 0 # Reader aus<br />
= 1 # Reader ein (default)<br />
<br />
==== description ====<br />
{{Optional}}<br />
description = Text <br />
<br />
Beliebiger Text zur Beschreibung des readers; default: [blank] keine Beschreibung<br />
<br />
'''Nicht zu verwechseln mit ''label''!''' Hier kann zusätzlich eine Information hinterlegt werden, z.B. Reader nur für CI+ usw.<br />
<br />
<br />
==== protocol ====<br />
{{Mandatory}}<br />
Kommunikationsprotokoll für den Reader.<br />
protocol = mouse # (Lokaler Cardreader)<br />
= internal # (Alle Cardreader mit einem "Device=/dev/sciX", sowie interne Coolstream-Reader)<br />
= camd35|cs357x # (Cascading - camd 3.5-kompatibler Remote-Server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x # (camd 3.5-kompatibler Remote-Server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1 # (SC8in1 und MCR 4/8 Cardreader)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''smartreader:''' Es können Probleme auftreten, wenn der Cardreader im smartreader-Modus in einem USB-Hub betrieben wird.<br />
In diesem Fall den Cardreader direkt am PC/Receiver einstecken und erneut testen.<br />
Sollte es dann funktionieren, ggf. einen anderen USB-Hub besorgen.<br />
<br />
<br />
==== device ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8911:09/10/2013</span><br />
<br />
Legt den local oder remote reader Abschnitt [reader] fest:<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw <br />
<br />
Bestimmt den reader type:<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3 <br />
bus:device: Bus- und Device-Namen von Smartreader+ oder Infinity USB (mit lsusb 'Bus' und 'Device' holen)<br />
serialnum: Serial-Nummer des Smartreader+ oder Infinity USB<br />
device: Name der Device<br />
device:slot: device name und slot-nummer '''für sc8in1''' (1-8)<br />
'''Es wird nur ein SC8in1 unterstützt!'''<br />
ip|hostname: IP-Adresse oder Hostname<br />
port: TCP/IP port <br />
lport: Remapping für den Local-Port (TCP/IP)<br />
PCSC: Nummer des PCSC-Readers (mit 0 starten!)<br />
Alternativ kann über den Namen des Readers (bzw. einen Teil davon) selektiert werden, z.B. "-1:SCR 3310" (Namen der erkannten Reader werden bei "oscam -d 32" ausgegeben)<br />
0|1: '''Nur für die Coolstream HD-1''' (Reader 0 oder 1 auswählen)<br />
constantcw: Dateiname für das Constant-CW-File<br />
<br />
Format des CW-Files: <br />
'''Standard-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
Beispiele für device--parameter:<br />
device = /dev/ttyS0 # Reader an COM1 (bei Linux i386 und Windows)<br />
device = /dev/tts/1 # Reader an COM2 (Linux dbox2 mit multicam)<br />
device = /dev/ttyUSB0 # Reader an USB (Linux i386)<br />
device = Serial:Reader 1 # z.B. Smargo im smartreader-Modus, wobei die Kennung "Reader 1" der Smargo-Konfiguration zu entnehmen ist!<br />
device = /var/keys/constant.cw # Einbindung eines constantcw<br />
device = /dev/ttyUSB0:1 # Slot 1 eines SC8in1 oder MCR 4/8 (Linux i386)<br />
<br />
'''Hinweis:''' Der Zähler für die Device liegt immer um 1 hinter der Nummer des COM-Ports! Also ttyS0 = COM1, tts/1 = COM2. Bei Benutzung neuerer PC sind kaum noch serielle Anschlüsse vorhanden, sodass in diesen Fällen USB 2.0 benutzt werden muss. Hier am besten im Gerätemanager des PC nachschauen, welcher COM-Port dem Reader zugewiesen wurde und in die Device den Port -1 eintragen!<br />
<br />
==== detect ====<br />
{{Depends}}<br />
Der Card Status (Karte im Reader eingeführt oder entfernt) wird detektiert mit Hilfe einer handshake input Leitung der seriellen Schnittstelle (UART/SCI) - cd, cts, dsr oder ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" bedeutet: Keine Leitung zum detektieren des Card Status vorhanden. Karte wird immer als im Kartenleser gesteckt erkannt.<br />
<br />
* Falls das detect signal invertiert ist: prefix "!" (eg "detect = !cts")<br />
<br />
<br />
Falls Parameter '''use_gpio = 1''' gesetzt ist:<br />
<br />
detect = gpio1...gpio7 - Card Status wird über einen gpio erfasst. GPIO means "general purpose input output". <br />
<br />
<br />
Beispiel:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
'''protocol = mouse'''<br />
'''device = /dev/ttyUSB0''' (easymouse 2)<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends}}<br />
Benutze gpio als card detect/ reset. Siehe auch '''detect ='''<br />
use_gpio = 0|1 #default = 0<br />
<br />
==== cardmhz ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
'''Standard'''-Frequenz der Karte in Schritten von 10 KHz. Für Irdeto-Karten z.B. "cardmhz = 600" (6 Mhz)<br />
<br />
Beispiel:<br />
cardmhz = 600 # Irdetokarte<br />
= # [blank] Default-Wert 357<br />
<br />
'''Interne-Dreambox-Leser'''<br />
<br />
Wenn cardmhz >2000 eingetragen wird aktiviert OScam den PLL-Clock. Interne-Dreambox-Leser (Dream Multimedia GmbH und Clones) können damit optimal getaktet werden.<br />
<br />
Der verwendete cardmhz-wert entspricht dem höchsten PLL-Takt. OSCam wird dann den optimalen PLL-Teiler berechnen damit die Frequenz möglichst nahe an den Wert kommt welcher bei "mhz" definiert wurde.<br />
<br />
Benutze die folgenden Einstellungen:<br />
<br />
Modelle mit PPC-CPU (DM500/DM600/DM7000/DM7020): "cardmhz = 3150"<br />
<br />
Modelle mit MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.): "cardmhz = 2700"<br />
<br />
Die DM7025 ist speziell: "cardmhz = 8300"<br />
<br />
'''Wird nur der Parameter cardmhz gesetzt (ohne mhz = xxx) wird die Karte automatisch anhand des ATR getaktet!'''<br />
<br />
Beispiel:<br />
Du hast eine Dream 800 HD PVR, das ist eine MIPS, daher muss du "cardmhz = 2700" setzen. Nehmen wir an du hast eine Nagra-Karte welche auf 5 MHz laufen soll.<br />
Wenn du die Karte richtig takten willst verwende "cardmhz = 2700" und "mhz = 500", Oscam taktet die Karte dann mit der nächst möglichen Frequenz (4.50 Mhz).<br />
Möchtest du sie übertakten, dann verwende "cardmhz = 2700" und z.B. "mhz = 900".<br />
Deine Karte läuft nun auf 9 Mhz. Aber vorsichtig, eine übertaktete Karte kann heiss und instabil werden! ([[OSCam/de/examples/Overclocking|Overclocking]] beachten!)<br />
<br />
Viele Interne-Leser von anderen Herstellern als Dream ignorieren die eingestellten Werte! Aber du solltest "cardmhz" und mhz" trotzdem setzen da es zum berechnen der richtigen "timings" verwendet wird. Wenn du cardmhz/mhz richtig setzt ist das "timing" besser für die aktuelle (automatisch gesetzte) Frequenz des Internen-Lesers. Als Ergebnis bekommst du bessere ECM-Zeiten oder mehr Stabilität.<br />
<br />
Erwarte keine Wunder, nur ein übertakten der Karte bringt bessere ECM-Zeiten. Schlechtes "timing" kann jedoch zu verzögerungen führen oder die Karte instabil machen.<br />
<br />
'''Nützliche Links:'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|Liste verschiedener Karten und ihren Frequenzen]]'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
==== mhz ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
mhz = Frequenz in KHz<br />
<br />
Sofern dies technisch möglich ist kann abweichend von '''cardmhz''' die Frequenz des Kartenlesers anders (in der Regel höher) als die Standard-Frequenz der Karte eingestellt werden (in 10 KHz-Schritten). Man spricht dann von [[OSCam/de/examples/Overclocking|Overclocking]]. So kann z.B. eine S02-Karte (Standard 6 MHz) mit 10 MHz übertaktet werden.<br />
<br />
Beispiel Externe-Reader:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
Beispiel DM800:<br />
cardmhz = 2700 # (27MHz PLL)<br />
mhz = 900 # (Wert wird berechnet -> 27Mhz : 3 = 9 Mhz)<br />
<br />
Hier eine ausführlichere Beschreibung von '''stefansat''' aus der Distri-Doku:<br />
<br />
Wenn die Frequenz in '''mhz''' größer ist als in '''cardmhz''', dann befindest Du dich im [[OSCam/de/examples/Overclocking|Overclocking]] Modus.<br />
<br />
Smargo-Reader und interne Reader der Dreamboxen werden durch den '''ATR''' automatisch eingestellt, wenn '''autospeed = 1''' (siehe nächsten Parameter) gesetzt ist.<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
<br />
==== autospeed ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
1 = setzt den mhz-Wert anhand des ATR (default)<br />
0 = disabled<br />
<br />
<br />
==== deprecated ====<br />
{{Optional}}<br />
Zuerst wird die Smartcard im Normal-Modus initialisiert. Schlägt dies fehl, wird die Initialisierung automatisch auf den veralteten Modus umgeschaltet, so dass die Smartcard-Geschwindigkeit nicht verändert wird und die Kommunikation auf normaler ATR Geschwindigkeit von 9600 Baud bleibt.<br />
deprecated = 1 # ausschließlich veralteter Modus<br />
= 0 # default<br />
<br />
<br />
==== mode ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Nur für AZBox'''<br />
<br />
mode = 1 # AzBox-Reader<br />
= 0 # default<br />
Setzt den Init-Mode für die Karte im internen AZBox-reader<br />
<br />
<br />
==== device_out_endpoint ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8013:12/29/2012</span><br />
<br />
Setzt die Addresse des Endpunkts für FTDI-Chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
<br />
==== smargopatch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet den workaround für smargoreader+ und reader ein, bis der native mode funktioniert<br />
smargopatch = 1<br />
= 0 (default)<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet fix für SC8in1/MCR DTR/RTS kernel bug ein<br />
sc8in1_dtrrts_patch = 1<br />
= 0 # (default)<br />
<br />
<br />
==== cool_timeout_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6286:01/23/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Setzt beim init der SC einen timeout in Millisekunden fest (im internen Reader).<br />
cool_timeout_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Hier kann ein timeout der SC für read/transmit nach dem init in Millisekunden festgelegt werden (nur für interne Reader).<br />
cool_timeout_after_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9568:03/16/2014</span><br />
<br />
Fügt einen Controll-Check für Pin Payload von NDS Videoguard Karten hinzu (4 Hex-Bytes). '''Gültig nur für physikalische Reader'''<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
<br />
==== ins7e ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5959:09/22/2011</span><br />
<br />
Füge 26 hex-bytes payload für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e = payload<br />
= # [blank] default (none)<br />
<br />
<br />
==== ins7e11 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6064:12/06/2011</span><br />
<br />
Füge TA1 für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e11 = TA1 Byte<br />
= # [blank] default (none)<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
<br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9884:09/30/2014</span><br />
{{Optional}}<br />
schaltet den 0x07-EMM-Fix für NDS Videoguard 2 Karten ein. '''Gültig nur für physikalische Reader'''<br />
fix07 = 1 # 0x07-EMM-Fix eingeschaltet (default)<br />
= 0 # ausgeschaltet <br />
<br />
<br />
==== force_irdeto ====<br />
{{Optional}}<br />
Forciert den Irdeto-Modus, auch wenn ein RSA-Key für Irdeto getunnelte Nagravisions-Karte vorliegt.<br />
force_irdeto = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
==== nagra_read ====<br />
{{Optional}}<br />
Lese Nagravision-Records. '''Nur für NCMED-Karten'''<br />
nagra_read = 0 # ausgeschaltet (default)<br />
= 1 # lese alle Records mit abgelaufenen Rechten<br />
= 2 # lese nur Records mit gültigen Rechten<br />
<br />
<br />
==== rsakey ====<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7046:06/12/12</span><br />
{{Optional}}<br />
<br />
RSA key für Nagravision/Tiger SCs / CAM key data für Irdeto SCs, Conax SCs<br />
rsakey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== fix9993 ====<br />
{{Optional}}<br />
fix9993 = 0|1<br />
<br />
Fixed den error 9993 bei CAID 0919 SC's<br />
<br />
fix9993 = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== readtiers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
Methode wie die Tiers von NDS Videoguard Smartcards ausgelesen werden.<br />
<br />
readtiers = 0 # ausgeschaltet (default)<br />
readtiers = 1 # ins70 (neue) Methode <br />
readtiers = 2 # ins76 (alte) Methode <br />
<br />
==== boxkey ====<br />
{{Optional}}<br />
Boxkey für Nagravision SCs / CAM key für Irdeto SCs<br />
boxkey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== pincode ====<br />
{{Optional}}<br />
Pincode für '''Conax-, Cryptoworks- und Viaccess-''' Karten.<br />
pincode = code<br />
= # [blank] default<br />
<br />
<br />
==== boxid ====<br />
{{Optional}}<br />
ID der '''NDS-Reciever-Box'''<br />
boxid = NDS box ID<br />
= # [blank] default<br />
<br />
<br />
==== ndsversion ====<br />
{{Optional}}<br />
Version von '''NDS Videoguard''' einsetzen<br />
ndsversion = 0 # autodetection (default)<br />
ndsversion = 1 # NDS Videoguard 1<br />
ndsversion = 12 # NDS Videoguard 1+<br />
ndsversion = 2 # NDS Videoguard 2<br />
<br />
<br />
==== aeskeys ====<br />
{{Optional}}<br />
Multiple AES-Keys für '''Viacces-Karten'''<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
Spezial AES Keys:<br />
00 = schicke keine CW zurück, es ist kein AES-Key spezifiziert<br />
FF = schicke CW zurück, die vom S empfangen wurden, es ist kein AES-Key spezifiziert<br />
<br />
Beispiel<br />
aeskeys = 0100@012345:000102030405060708090a0b0c0d0e0f;0200@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6624;04/23/2012</span><br />
{{Optional}}<br />
Anzahl der Subscritions-Klassen für '''Viacces'''<br />
schowcls = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== key ====<br />
{{Depends}}<br />
Key für Newcamd remote reader encription<br />
key = DES key<br />
<br />
<br />
==== user ====<br />
{{Optional}}<br />
Username für Remote-Reader.<br />
<br />
Beispiel<br />
user = # xyxyx<br />
<br />
<br />
==== password ====<br />
{{Optional}}<br />
Passwort für Remote-Reader.<br />
<br />
Beispiel<br />
password = # xyxyx<br />
<br />
<br />
==== mg-encrypted ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO</span><br />
<br />
mgcamd encrypted line für '''GBox!'''<br />
<br />
Format:<br />
<br />
mg-encrypted = D: { <IP|hostname> { <local port> <remote port> { <password> { <level> <level> }}}}[,<local MAC address>] # default MAC address=eth0<br />
<br />
default:<br />
mg-encrypted = # [blank] (none)<br />
<br />
<br />
==== services ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' <br />
<br />
Wenn Loadbalancing aktiviert ist, sind folgende Besonderheiten zu berücksichtigen:<br />
* Services sind für den Loadbalancer eine '''Whitelist'''. Das bedeutet, dass alles, was hier eingetragen wird, vom Loadbalancing als Service behandelt wird, den die Karte '''kann'''! Wenn dann z.B. ein "not found" kommt, wird das ignoriert und die Karte wird weiter angefragt, mit dem damit verbundenen traffic!<br />
* Daraus ergibt sich, dass der Eintrag von Services bei '''lokalen''' Karten und Proxies, '''die man genau kennt''', kein Problem darstellt.<br />
* Anders verhält es sich bei Proxies (z.B. CCcam), deren Services '''man nicht kennt'''. Hier ist davon abzuraten, Services einzutragen. In einem solchen Fall sollten vielmehr die Services bestimmt werden, die '''nicht zu berücksichtigen''' sind (Eintrag mit (!)), oder besser eine Filterung über den Parameter '''caid''' erfolgen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Die Anzahl der services, die je reader berücksichtigt werden, ist auf 64 begrenzt, also 64 mal [[service-name][CAID][provid][srvid]]! <br />
<br />
Welche Services kann der Reader. Hierzu muss eine oscam.services vorhanden sein. Die Logik ist hier folgendermaßen (in der angegebenen Reihenfolge):<br />
* Wenn das Feld leer ist (oder ungültig) wird die Anfrage erlaubt.<br />
* Wenn ein negativer Service (also solche mit "!") zutreffend ist, so wird die Anfrage abgewiesen.<br />
* Wenn ein positiver Service zutreffend ist oder es gar keinen positiven Service gibt, so wird die Anfrage erlaubt.<br />
* Wenn keiner der vorigen Punkte zutrifft, so wird die Anfrage abgewiesen.<br />
Dies bedeutet, dass negative Services nur in Einzelfällen nötig sind. Nämlich genau dann, wenn man positive Services hat, davon aber wieder einige ausnehmen will. Dies wird nicht empfohlen, da es hier schnell zu Fehlkonfigurationen kommt. Stattdessen sollte ein zusätzlicher Service angelegt werden, der alle entsprechenden Sender enthält.<br />
services = [!]services[,[!]<services>]...<br />
= [blank] ist default<br />
<br />
Beispiel<br />
services = skywelt,skyweltextra,!skyfilm<br />
# skywelt und skywelt extra sind zugeordnet, skyfilm ist ausgeschlossen<br />
<br />
<br />
==== caid ====<br />
{{Optional}}<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
definiert und mapped CAIDs für Reader<br />
<br />
Beispiele:<br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut für das Beispiel oben)<br />
default: alle CAIDs mit der Maske FFFF<br />
<br />
<br />
==== ident ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Wenn in oscam.conf [global] unter lb_mode loadbalancing aktiviert ist, dann dürfen hier keine Einträge stehen!<br />
<br />
Definiert CAID und Ident '''kartenspezifisch''' für den Reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Beispiel<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] Keine Definition (default)<br />
<br />
<br />
==== class ====<br />
{{Optional}}<br />
Definiert Class '''in hexadecimal''' kartenspezifisch für den Reader:<br />
class = 01,02,!1b,!2b # 01 und 01 ja, 1b und 2b nein<br />
= # [blank] Keine Definition (default)<br />
<br />
<br />
==== chid ====<br />
{{Optional}}<br />
Definiert '''Irdeto'''-ChID für den Reader.<br />
<br />
Beispiel<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
<br />
==== group ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6103:12/21/2011</span><br />
<br />
Jeder Reader muss in einer oder mehrere Gruppen eingetragen sein. Damit lässt sich bestimmen, welcher Client auf welchen Reader Zugriff hat. Gültige Werte 1-64<br />
group = 1....64[,1....64]....<br />
<br />
'''Da ein Eintrag zwingend ist, darf hier kein [blank] als default stehen!'''<br />
<br />
Beispiel<br />
Group = 1 # (eine Gruppe)<br />
Group = 1,4,5 # (mehrere Gruppen)<br />
<br />
<br />
==== audisabled ====<br />
{{Optional}}<br />
Schließt den Reader vom AU (Auto-Updating) aus<br />
audisabled = 1 # ausgeschlossen<br />
= 0 # nicht ausgeschlossen (default)<br />
<br />
<br />
==== auprovid ====<br />
{{Optional}}<br />
Hier kann die Provider-ID festgelegt werden, damit der richtige Reader für das AU zur Verfügung steht<br />
<br />
Beispiel<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
<br />
==== disableserverfilter ====<br />
{{Optional}}<br />
Ignoriert CAID und Ident-Einstellungen des Readers bei fehlerhaften Clients.<br />
disableserverfilter = 1 # ignoriert<br />
= 0 # ignoriert nicht (default)<br />
<br />
<br />
==== inactivitytimeout ====<br />
{{Depends}}<br />
Für alle TCP-basierende remote Reader<br />
<br />
inactivitytimeout = # in Sekunden<br />
= -1 # Verbindet '''newcamd''' basierende Reader bei einem Netzwerkausfall erneut (auch im Leelauf - idle -)<br />
= 0 # default<br />
<br />
<br />
==== reconnecttimeout ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7244:08/07/2012</span><br />
<br />
Zeitspanne in Sekunden für eine Wiederverbindung mit einem Remote-Reader, wenn Antworten ausbleiben<br />
<br />
Beispiel<br />
reconnecttimeout = 20 # Nach 20 Sekunden ohne Antworten wird wiederverbunden<br />
= # [blank] default 30 Sekunden<br />
<br />
<br />
==== connectoninit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = Ermöglicht die Herstellung einer Newcamd-Verbindung, solange noch kein Request vorliegt<br />
0 = default<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = ermöglicht es einem cs378x TCP socket, ständig verbunden zu sein<br />
0 = Immer eingeschaltet bei einem cacheex reader type (default)<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Definiert diesen Reader als Fallback. Standard- und Fallback-Reader müssen in der selben Gruppe sein. Siehe '''group'''!<br />
fallback = 1 # Fallbackreader<br />
= 0 # Kein Fallbackreader (default)<br />
<br />
'''Info:'''<br />
<br />
Ist Loadbalancing aktiviert, und zusätzlich der Parameter "cwcycle_allowbadfromffb = 1", wird dieser Reader ein fixed Fallback für CacheEx.<br />
Somit wird er verwendet wenn ein Bad Cycle erkannt wird, damit freetzer entsprechend verhindert werden können.<br />
--> siehe [[OSCam/de/Config/oscam.conf#cwcycle_allowbadfromffb|cwcycle_allowbadfromffb]]<br />
<br />
<br />
==== fallback_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
Benutze den Reader nur als fallback für vorher definierte CAIDs, two-digit wildcards sind möglich. Dieser Parameter überschreibt den Parameter fallback!<br />
Default = none<br />
<br />
Beispiel:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional}}<br />
Definition des EMM-Caches für den Reader. Derzeit nur für lokale Reader. Betrifft die AU-Funktion. Damit kann entschieden werden, ob Update-Kommandos (EMM) vom Provider immer oder nur unter bestimmten Voraussetzungen geschrieben werden.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
Ohne diesen Parameter werden keine EMM im Log angezeigt!<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # cache/stats aus (default)<br />
* <usecache> 1 = # cache/stats ein und schreibe sie in eine Datei wenn oscam beendet wird<br />
* <usecache> 2 = # cache/stats ein, aber schreibe sie beim beenden von oscam <ins>nicht</ins> in eine Datei<br />
<br />
* <rewrite> n = # Wie oft ein und das selbe Update-Kommando (EMM) geschrieben wird. ''Gilt nur bei <usecache> = 1 oder 2''<br />
<br />
* <logging> 0 = # Einträge im Logfile ausgeschaltet (default)<br />
* <logging> 1 = # Nur fehlerhafte EMM werden geloggt<br />
* <logging> 2 = # die geschriebenen (written) EMM werden geloggt<br />
* <logging> 4 = # die zurückgewiesenen (skipped) EMM werden geloggt<br />
* <logging> 8 = # die blockierten (blocked) EMM werden geloggt<br />
* <logging> 16 = # disabled AU werden geloggt<br />
Aufsummieren der Werte ist möglich, 31 wird also alle loggen.<br />
<br />
* <stb-emm> 0 = # EMM für die STB werden ignoriert (default)<br />
* <stb-emm> 1 = # EMM für die STB werden zum Reader gesendet (nur sehr spezifisch nötig)<br />
<br />
Beispiele:<br />
emmcache = 1,3,10,0 # Cache ein, 3 x schreiben, die geschriebenen (2) und die geblockten (8) = 10 loggen, keine stb-emm senden<br />
emmcache = 1,2,6,1 # Cache ein, 2 x schreiben, die geschriebenen (2) und die zurückgewiesenen (4) = 6 loggen, stb-emm senden<br />
<br />
'''stb-emm''': ist nur für einige Viaccess-User sinnvoll (siehe Commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) und '''bestimmt nicht für User mit einer echten Karte im Reader'''.<br />
<br />
Dazu [http://www.streamboard.tv/wbb2/thread.php?postid=538345#post538345 noch ein Zitat vom User ''pr2'']: "In Viaccess sahen wir einige EMM-G, die für die Set-Top-Box(STB) waren und nicht für die Karte, deshalb nennen wir das STB-EMM. Diese EMMs setzen den Overencryption-Key (AES) in der STB für die Verschlüsselung der Kommunikation zwischen STB und Karte."<br />
<br />
<br />
==== emmreassembly ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8591:04/01/2013 Parameter jetzt in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = schaltet Neuaufbau von EMM ein, default<br />
0 = schaltet Neuaufbau von EMM aus<br />
<br />
Sollte bei '''Viaccess und Cryptoworks Readern''' gesetzt werden, wenn der Client, der für das Senden von EMMs benutzt wird, die EMMs neu aufbaut anstelle sie an OScam zur Bearbeitung zu senden.<br />
<br />
<br />
==== cacheex ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
cacheex = 1 # enable cache exchange pull mode<br />
cacheex = 2 # enable cache exchange push mode<br />
cacheex = 3 # enable cache exchange revers push mode<br />
cacheex = 0 # aus (default)<br />
<br />
Identische modes müssen bei local OSCam server und remote OSCam user account gesetzt werden!<br />
Nur für camd3.5x und CCcam Protokolle!<br />
<br />
Siehe auch entsprechenden Parameter in oscam.user!<br />
<br />
[[Datei:MessageS.png|text-bottom]]'''Ein ausführliches How-To findet man [[Streamboard-Post:406230|hier]]'''<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam A erhält eine ECM Anfrage, reader1 sendet diese Anfrage an OSCam B,<br />
<br />
OSCam B prüft seinen cache:<br />
* im cache wird nichts gefunden: OSCam B sendet: NOK<br />
* im cache wird etwas gefunden; OSCam B sendet: OK+CW<br />
* im cache wird nichts gefunden aber es wird eine anstehende Anfrage festgestellt: ''cacheexwaittime'' in oscam.conf [global] wird abgewartet und dann erneut geprüft. OSCam B fragt nicht mehr nach neuen EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 2<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 2<br />
<br />
Wenn OSCam B ein CW erhält, wird es auf OSCam A geschoben. Der Reader hat normale Funktionen und kann ECMs anfragen.<br />
* Problem: OSCAM kann nur dann CW's auf OSCam A schieben, wenn OSCam A verbunden ist<br />
* Problem oder feature?: OSCam A kann ECMs von OSCam B anfragen<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 ist gesetzt auf cacheex = 3<br />
<br />
Wenn OSCam A ein CW erhält, wird dies auf OSCam B geschoben. OSCam A fragt nicht mehr nach neuen ECMs<br />
<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = Anzahl der hops<br />
= default = 10<br />
<br />
Festlegen der maximalen hops für cache exchange. Zum pushen des lokalen caches 1 eintragen. Der Eintrag cacheex_maxhop = 0 bewirkt nur, dass der default-Wert von 10 genommen wird.<br />
<br />
<br />
==== logport ====<br />
{{Optional}}<br />
Logport für einen '''Camd 3.x'''-Reader. UDP muss aktiviert sein. Funktioniert nur, wenn in Camd 3.x kein Cascading stattfindet!<br />
logport = Port-Nummer<br />
= # kein Logport (default)<br />
<br />
<br />
==== ecmwhitelist ====<br />
{{Optional}}<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
definiert die gültige ECM-Länge in '''hex''' und provid für physische Reader<br />
<br />
Beispiel:<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = keine (default) und provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Im normalen Betrieb ist dieser Parameter nicht erforderlich!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|Liste mit ECM-Längen]]'''<br />
<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
Gültige ECM-Header mit CAID und provid '''in hex''' einsetzen.<br />
<br />
default: none, provid = 000000<br />
<br />
Ein Thread dazu ist [[Streamboard-Thread:34748|hier]] zu finden.<br />
<br />
Und hier findet man eine ständig gepflegte [[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] .<br />
<br />
<br />
==== ratelimitecm ====<br />
{{Optional}}<br />
Anzahl der unterschiedlichen SIDs die in ECMs innerhalb eines Intervalls erlaubt sind<br />
ratelimitecm = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = Anzahl<br />
<br />
Anzahl der ECM's mit "not found" Anwort bis der Reader neu gestartet wird, 0 = kein Limit (default)<br />
<br />
<br />
==== resetcycle ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5821:08/12/2011</span><br />
<br />
Anzahl von ECM's bis ein Reset des Cardreaders durchgeführt wird<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
resetcycle = 5 # Reset nach 5 ECM's<br />
= 0 # ausgeschaltet [default]<br />
<br />
<br />
==== ratelimittime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
Intervall für ein ratelimit<br />
ratelimittime = Millisekunden<br />
= 0 # (default)<br />
<br />
<br />
==== ecmunique ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = ermöglicht eine Überprüfung des matching ECM hash im ratelimit slot<br />
0 = default<br />
<br />
<br />
==== srvidholdtime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
srvidholdtime = Millisekunden<br />
<br />
Zeitraum, in dem die Service-ID im ratelimit slot gehalten werden soll. Während dieses Zeitraums ist der Zeit-Check für ecmunique ausgeschaltet. Default = 0<br />
<br />
<br />
==== cooldowndelay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5946:09/09/2011</span><br />
<br />
cooldowndelay <br />
<br />
Erläuterung:<br />
delay = Verzögerungszeit in Sekunden, in der dem Reader erlaubt ist, mehr ECM-Anfragen zu stellen,<br />
als im Parameter "ratelimitecm" festgelegt ist<br />
default: [blank] keine<br />
duration = Zeitdauer in Sekunden, die der Reader für einen cooldown benötigt<br />
default: [blank] keine<br />
<br />
'''Voraussetzung ist, dass die Parameter "ratelimitecm" und "ratelimittime" ausgefüllt sind!'''<br />
<br />
<br />
==== block and save ====<br />
Zur Thematik block, save, select und write EMM gibt es hier [[http://www.streamboard.tv/wiki/EMM]] ein besonderes Wiki!<br />
<br />
<br />
===== blocknano =====<br />
{{Optional}}<br />
Liste zu blockender EMM-Nanos (in hex) oder aller EMM-Nanos. Gilt nur für physikalische Reader!<br />
<br />
Beispiel<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
<br />
===== blockemm-u =====<br />
{{Optional}}<br />
''unique address-EMMs, entspricht D3 bei Sk*''<br />
blockemm-u = 1 # Blocke EMMs, die an die Karte direkt adressiert sind)<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-s =====<br />
{{Optional}}<br />
''shared address-EMMs, entspricht D2 bei Sk*''<br />
blockemm-s = 1 # Blocke EMMs, die an bestimmte Gruppen von Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-g =====<br />
{{Optional}}<br />
''global address-EMMs, entspricht D0 bei Sk*''<br />
blockemm-g = 1 # Blocke EMMs, die an alle Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-unknown =====<br />
{{Optional}}<br />
Blockiert alle unbekannten Arten von EMM<br />
blockemm-unknown = 1 # Blocke alle unbekannten Arten von EMMs<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-bylen =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8615:04/12/2013</span><br />
<br />
Blockiere alle Arten von EMMs anhand der Länge. Es werden maximal 10 Werte zugelassen.<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
= # [blank] keine Blockierung (default)<br />
<br />
Beispiel:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br />
===== via_emm_global =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9843:09/05/2014</span><br />
<br />
via_emm_global = 0|1<br />
<br />
ermöglicht die Filterung von globalen emm für '''viacces'''<br />
<br />
'''ausschließlich für camd35 (cs357x) Protokoll!'''<br />
<br />
0 = default<br />
<br />
<br />
===== saveemm-u =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unique-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-u = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-s =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere shared-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-s = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-g =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere global-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-g = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-unknown =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unknown-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-unknown = 1<br />
= 0 # (default)<br />
<br />
===== needsglobalfirst =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn11494:02/03/2019</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Nur für Cryptoworks Karten mit den CAIDs 0D96 & 0D98'''<br />
<br />
Ist der Parameter gesetzt, wird nur noch ein global EMM pro shared EMM geschrieben. Der Rest der global EMMs wird geblockt. Dazu darf das Schreiben der global und shared EMMs nicht generell geblockt sein. Also Vorrausetzung ist: blockemm-s = 0 und blockemm-g = 0.<br />
<br />
needsglobalfirst = 0|1 - 0 default<br />
<br />
Beispiel<br />
needsglobalfirst = 1<br />
blockemm-g = 0<br />
blockemm-s = 0<br />
<br />
===== savenano =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn5947:09/09/2011</span><br />
<br />
Liste von EMM-Nanos, die gespeichert werden sollen (hex) oder alle EMM-Nanos. Der Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
<br />
===== readnano =====<br />
{{Optional}}<br />
Schreibt ein File (üblicherweise eine Copy des von savenano gesicherten files) in die SC. Wenn kein Pfad angegeben ist, wird danach im Konfigurations-Verzeichnis gesucht. <br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
readnano = /var/oscam/write.emm # Beispiel Pfad/Dateiname<br />
= write.emm # Nur Dateiname<br />
= # [blank] es wird kein File geschrieben (default)<br />
<br />
<br />
==== use-ssl ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
use_ssl = 1 # benutze SSL für ghttp protocol<br />
= 0 # default<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # weise falsche CW's zurück, sende "not found" an Stelle falscher CWs<br />
= 0 # default<br />
<br />
Die Option hat nur eine Wirkung auf dem oscam Server (oscam.server, [reader]), der die Karte direkt anspricht, also nicht auf einem Client. Betroffene Karten: CSAT (0100:003311)<br />
<br />
<br />
==== disablecrccws ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6004:10/26/2011</span><br />
<br />
disablecrccws = 1 # unterdrücke den cw-checksum-test<br />
= 0 # cw-checksum-test eingeschaltet (default)<br />
<br />
Hier mal eine Erklärung von Bit aus dem SB:<br />
<br />
Das ist für den dänischen Provider BoxerTV.<br />
Die haben Gegenmassnahmen eingeleitet und die VIA Karten verdauen keine Checksum-korrigierten CWs mehr. Damit kann man die CW checksummenkorrektur bei diesen readern ausschalten.<br />
Dann geht's wieder bei BoxerTV-readern.<br />
(dropbadcws muss dann auf aus sein).<br />
...<br />
PS: die checksummenkorrektur ausschalten ist böse und entgegen des DVB-Standards! Benutzt diesen Parameter nur wenn Ihr ihn wirklich benötigt!<br />
<br />
====disablecrccws_only_for====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID<br />
<br />
Exemple :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
<br />
==== lb_weight ====<br />
{{Optional}}<br />
Je höher dieser Wert, desto größer ist die Wahrscheinlichkeit, dass dieser Reader ausgesucht wird. Es ist ein Indikator für die durchschnittliche Antwortzeit innerhalb des Loadbalancing<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
<br />
Abwärts die durchschnittliche Antwortzeit des Readers. Von rechts nach links der Wert lb_weight. <br />
Im Mittelfeld könnt Ihr ablesen, wie die durchschnittliche Antwortzeit durch den lb_weight wert "korrigiert" wird.<br />
<br />
<br />
'''Beispiel:'''<br />
<br />
Du hast 2 Reader die beide eine durchschnittliche Antwortzeit von 400ms haben. Nun möchtest Du aber einen Reader bevorzugen indem Du dem Loadbalancer 300ms vorgaukeln willst.<br />
<br />
Also suchst Du die Zeile die mit 400 beginnt und wanderst auf dieser Zeile nach rechts bis du bei ~300 (in der tabelle findest du nur 30cool bist. Dann liest Du oben den Wert für lb_value ab den der Reader bekommt (130). Diesen trägst Du bei dem Reader ein und schon wird der Reader bevorzugt<br />
<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional}}<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
Zuordnung von Services an den Reader, welche durch den Loadbalancer nie geblockt werden sollen, default=none<br /><br />
<br />
<br />
==== lb_force_fallback ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = setzt den Reader ständig in fallback-modus für das load balancing ohne Berücksichtigung der reader statistics,<br /><br />
0 = default<br />
<br />
<br />
==== ccc ====<br />
===== cccversion =====<br />
{{Depends}}<br />
'''Nur für CCcam'''<br />
<br />
Definiert die Version von CCcam, die verwendet werden soll.<br />
<nowiki><mainversion>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
cccversion = 1.2.34<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
===== cccmaxhops =====<br />
{{Depends}}<br />
Legt das Maximum an Distance-Hops für die Karte fest<br />
0 = Nur lokale Karte<br />
1 = Lokale Karte + 1 Hop<br />
2 = Lokale Karte + 2 Hops<br />
und so weiter<br />
Default-Wert = 10<br />
<br />
<br />
===== ccchop =====<br />
{{Depends}}<br />
ccchop = hop<br />
<br />
Setzt den hop für '''nicht'''-cccam-reader<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Definiert den reshare-hop für CCcam-Reader<br />
<br />
cccreshare = hop<br />
= -1 # kein reshare<br />
= 0 # reshare für direct peer <br />
= 1 # reshare für direct peer und den nächsten Level<br />
= x # reshare für direct peer und die nächsten x (Anzahl) Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
===== cccwantemu =====<br />
{{Depends}}<br />
Anfrage, auch einen emu vom CCcam-Server zu erhalten.<br />
cccwantemu = 1 # ja<br />
= 0 # nein default<br />
<br />
<br />
===== ccckeepalive =====<br />
{{Depends}}<br />
Sendet eine "keepalive-message", um eine Verbindung zum remote CCCam-Server zu erhalten.<br />
ccckeepalive = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
===== cccreconnect =====<br />
{{Optional}}<br />
cccreconnect = timeout (ms)<br />
<br />
default = 12000 (ms)<br />
<br />
Wiederverbindung nach ECM-Request-Timeout in Millisekunden.<br />
Gilt nur für O-cccam reader, für cccam-ext Protokoll wird diese Zeit ignoriert.<br />
<br />
<br />
===== cccmindown =====<br />
{{Depends}}<br />
cccmindown = # Zahl<br />
= 0 default<br />
<br />
Filtert alle Reader mit hops, die kleiner sind als die eingesetzte Zahl<br />
<br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBOX läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
===== device =====<br />
{{Mandatory}}<br />
device = Komma-separierte Liste mit den Werten<br />
<br />
peer's IP oder Hostname<br />
peer's port<br />
<br />
Beispiel:<br />
device = 192.168.1.101,3820<br />
<br />
<br />
===== password =====<br />
{{Mandatory}}<br />
password = 4 hex bytes, 8 chars<br />
<br />
Peer Passwort<br />
<br />
Beispiel:<br />
password = A123BCDE<br />
<br />
===== gbox_reshare =====<br />
{{Optional}}<br />
Reshare-Level für lokale Karte(n), default = 2<br />
<br />
===== gbox_max_distance =====<br />
{{Optional}}<br />
gbox_max_distance = maximale Distanz zum Empfang von peer-cards, default = 2<br />
<br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional}}<br />
gbox_max_ecm_send = sende ecm zu maximal n peer cards, default = 5<br />
<br />
===== user =====<br />
{{Mandatory}}<br />
Benutzername (client) der oscam Gbox<br />
<br />
Beispiel<br />
user = gbox_client<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
'''Der user muss auch in der oscam.user als [account] eingetragen werden.'''<br />
<br />
'''Man sollte unbedingt für jeden gbox [reader] einen anderen user [account] benutzen.'''<br />
'''Nur dann sind die Peers im Log usw unterscheidbar.'''<br />
<br />
'''Unter [reader] und [account] sollten geeignete Filter gesetzt werden (services=, caid=, ident=), um Instabilitäten der GBOX durch<br />
'''Überfluten mit Karten zu vermeiden.'''<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13535
OSCam/en/Config/oscam.server
2020-03-24T22:17:00Z
<p>Felixka: /* gbox_max_ecm_send */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID;CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830;098C:000000<br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password provided by peer (4 bytes, 8 hex chars)<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these CAIDs.<br />
'''Attention: The CAID filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 5<br />
<br />
<br/><br />
<br />
===== force_remm =====<br />
{{Optional/en}}<br />
<br />
Force remote emm <br />
<br />
force_remm = 0|1|... , default = 0 (disabled)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''use only to activate a card or if card entitlements are expired'''<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to be send into gbox network<br />
<br />
cccam_reshare = level default = -1<br />
<br />
cccam_reshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13534
OSCam/en/Config/oscam.server
2020-02-26T11:59:41Z
<p>Felixka: /* disablecrccws_only_for */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID;CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830;098C:000000<br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password provided by peer (4 bytes, 8 hex chars)<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these CAIDs.<br />
'''Attention: The CAID filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 3<br />
<br />
<br/><br />
<br />
===== force_remm =====<br />
{{Optional/en}}<br />
<br />
Force remote emm <br />
<br />
force_remm = 0|1|... , default = 0 (disabled)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''use only to activate a card or if card entitlements are expired'''<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to be send into gbox network<br />
<br />
cccam_reshare = level default = -1<br />
<br />
cccam_reshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13533
OSCam/en/Config/oscam.server
2020-02-24T17:55:17Z
<p>Felixka: /* cccam_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password provided by peer (4 bytes, 8 hex chars)<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these CAIDs.<br />
'''Attention: The CAID filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 3<br />
<br />
<br/><br />
<br />
===== force_remm =====<br />
{{Optional/en}}<br />
<br />
Force remote emm <br />
<br />
force_remm = 0|1|... , default = 0 (disabled)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''use only to activate a card or if card entitlements are expired'''<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to be send into gbox network<br />
<br />
cccam_reshare = level default = -1<br />
<br />
cccam_reshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.conf&diff=13532
OSCam/en/Config/oscam.conf
2020-02-24T17:30:00Z
<p>Felixka: /* ccc_gbx_caid */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
==oscam.conf==<br />
<br />
=== The [global] section ===<br />
<br />
The main configuration file for OSCam contains global parameters such as debugging, logging, monitor, protocols and anti-cascading. Sections in oscam.conf are nonrecurring. The [global] section is required. All other sections are optional.<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If a parameter is empty or is not listed in config-file, then apply the default values !<br />
<br />
==== nice ====<br />
{{Optional/en}}<br />
<br />
'''Systempriority'''<br />
<br />
OSCam requires almost no CPU-power. But if CPU-power is required, it should be available immediatly. Values between 20 and -20 are possible. 20 = low, -20 = very high. If this parameter is commented out (#), this function is not called. Important for example for dbox2[http://de.wikipedia.org/wiki/DBOX2], if the error messages "''relocation error:setpriority''". See [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Example:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
===== initial_debuglevel =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10705:06/11/15</span><br />
<br />
Set the debuglevel on startup.<br />
<br />
Example:<br />
initial_debuglevel = 8<br />
<br />
Default:<br />
initial_debuglevel = 0<br />
<br />
===== pidfile =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8176/01/24/2013</span><br />
<br />
pidfile = set pidfile, [blank] none (default)<br />
<br />
Change PID file name an path. If default = oscam.pid in /tmp<br />
<br />
Example:<br />
pidfile = /var/run/oscam.pid<br />
<br />
===== logfile =====<br />
{{optional/en}}<br />
<br />
Logging target<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
You can define a maximum of one filename (not more!) and additionally to log to stdout or syslog (you can also only log to stdout or syslog and omit the filename).<br />
<br />
Opportunities:<br />
<br />
logfile = /var/log/oscam.log # file or linux device (for example /dev/tty)<br />
logfile = syslog # log to syslogd <br />
logfile = stdout # showing the log on the console<br />
<br />
Example:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format logfile:<br />
CAID&ident/provider/length:checksum<br />
<br />
===== ecmfmt =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
define ECM log format, default:c&p/i/s/l:h <br />
<br />
possible variables: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and CCcam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , this ID will be replaced with the tier-description from oscam.tiers (if found)<br />
w = CW<br />
y = payload (short, 3 bytes)<br />
Y = payload (long, 6 bytes)<br />
<br />
<br />
use a value as prefix to hide variable with this value, control characters will be escaped by "\" <br />
<br />
example:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w HOP:j<br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn10048:11/30/2014</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs will be dropped, if CWs do not have an odd an even sample (default)<br />
1 = disabled<br />
<br />
===== loghistorysize =====<br />
{{optional/en}}<br />
<br />
loghistorysize = bytes<br />
<br />
size of log message history in web interface or monitor<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) #stage 2 is used only if '''preferlocalcards = 1''' was activated in [global] section. <br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
example<br />
<br />
P/2/2/2 or L/2/4/4<br />
<br />
===== maxlogsize =====<br />
{{required}}<br />
<br />
Here the maximum size of logfiles are set in KBytes. This is especially important for server with only a small amount of memory (dbox2). Therefore it is strongly recomended to determine carefully that size at such servers. Not infrequently a system "bursting" because the logfile uncontrolled large scale adopted!<br />
<br />
Example<br />
maxlogsize = 20 # Logfile reaches to 20 KBytes<br />
= 0 # Logfile '''unlimited'''<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile reaches to 10 KBytes (default)<br />
<br />
===== logduplicatelines =====<br />
{{optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8290/02/05/2013</span><br />
<br />
logduplicatelines = 0|1<br />
<br />
1 = disable detection of duplicate lines in log file<br />
0 = enable detection of duplicate lines in logfile = default<br />
<br />
===== disablelog =====<br />
{{optional/en}}<br />
<br />
switches logfile '''off'''<br />
1 = '''no log''' <br />
0 = '''log''' <br />
<br />
Example:<br />
disablelog = 1 # '''no''' log <br />
<br />
Default:<br />
disablelog = 0 # '''log'''<br />
<br />
===== cwlogdir =====<br />
{{Optional/en}}<br />
<br />
<br />
A path for cw logging can be configured here. The path is relative to the work directory and must exist. Otherwise no logs are created and no errors are reported. <br />
<br />
CWs (control words) are the answers of the card which decrypts a certain channel for some seconds before the next cw is transmitted. The CW log file can be used for delayed decoding of this channel. This is also called offline decoding. Watch this [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
Oscam creates a new *.cwl file for each channel and each day. The file name contains the date, service ID and service name, e.g. 110808_I000B_Sky_Cinema_+1.cwl with this contents:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
All cws are logged if at least one user watches the channel. Please choose a path with enough space, since per day and channel some 10KB of data are created. A script that moves/deletes the log files regularly is recommended.<br />
<br />
Example:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] no path for cw-log, logging disabled<br />
<br />
===== emmlogdir =====<br />
{{Optional/en}}<br />
<br />
Setting a path for emm-log. You can define with the "saveemm-*"-Parameters in oscam.server which EMMs should be logged.<br />
<br />
Example:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] the config folder will be used for emm logging<br />
<br />
===== usrfile =====<br />
{{Optional/en}}<br />
<br />
Set a name für userfile<br />
<br />
Format of the userfile: <br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Example:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
===== disableuserfile =====<br />
{{Optional/en}}<br />
<br />
Now it is crazy: Even if a logfile is switched on (see logfile), the userfile can be turned off!<br />
<br />
Example:<br />
disableuserfile = 1 # '''no''' userfile <br />
= 0 # '''userfile'''<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
===== usrfileflag =====<br />
{{Optional/en}}<br />
<br />
Setting the logging-modus<br />
0 = Only login and logout will be logged<br />
1 = Each zapping from client will be logged<br />
Default is 0<br />
<br />
Example:<br />
usrfileflag = 1 # All will be logged<br />
<br />
Default:<br />
usrfileflag = 0 # Only login und logout will be logged<br />
<br />
===== saveinithistory =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn7128:07/02/2012</span><br />
<br />
Save SC init history to /tmp/.oscam/reader<number>. Needed to show entitlements.<br />
<br />
Example:<br />
saveinithistory = 1 # save to /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # no save<br />
<br />
===== mailfile =====<br />
{{Optional/en}}<br />
<br />
mailfile = file<br />
<br />
define file saving NDS Videogard mail messages from provider. Default: [blank] none<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
delay in millisencons for asking cache exchange mode 1 readers, default: none<br />
<br />
===== disablemail =====<br />
{{Optional/en}}<br />
<br />
disablemail = 0|1<br />
<br />
disable saving NDS Videogard mail messages form provider. Default = 1 (disabled)<br />
<br />
===== sysloghost =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set remote syslog server will be activated. Messages will be sent to this IPv4 address. If not set remote syslog server not work.<br />
<br />
Example:<br />
sysloghost = 192.168.1.167<br />
<br />
===== syslogport =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set ''sysloghost'' remote syslog server will be activated. Messages will be sent to this port. If not set port 514 is used as default. <br />
<br />
Example:<br />
syslogport = 515<br />
<br />
Default:<br />
syslogport = 514<br />
<br />
==== Reader ====<br />
<br />
===== enableled =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
===== serialreadertimeout =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8541:03/13/2013</span><br />
<br />
'''Only using Serialreader!'''<br />
<br />
timeout for serial reader in milli-seconds<br />
<br />
Example:<br />
serialreadertimeout = 1200 # Timeout after 1200 milli-seconds<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout after 1500 milli-seconds<br />
<br />
===== waitforcards =====<br />
{{Optional/en}}<br />
<br />
wait for local SCs on startup before opening network ports<br />
<br />
Example:<br />
waitforcards = 0 # don't wait<br />
<br />
Default:<br />
waitforcards = 1 # wait<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional/en}}<br />
<br />
waitforcards_extra_delay = milli seconds<br />
<br />
additional delay in milli seconds after waiting for local SCs on startup before opening nework ports<br />
<br />
default = 500<br />
<br />
===== preferlocalcards =====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn9605:03/29/2014</span><br />
<br />
try decoding on local cards first<br />
<br />
Example:<br />
preferlocalcards = 0 # local cards are used like remote reader<br />
preferlocalcards = 1 # prefer CacheEx sources <br />
preferlocalcards = 2 # prefer local cards<br />
<br />
Default:<br />
preferlocalcards = 1 # prefer CacheEx sources<br />
<br />
===== readerrestartseconds =====<br />
{{Optional/en}}<br />
<br />
waiting time in seconds beetween restarts<br />
<br />
Example:<br />
readerrestartseconds = 10 # waiting time 10 seconds<br />
= 0 # '''no restarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # waiting time 5 seconds<br />
<br />
===== block_same_ip =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_ip = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same ip address, default = 1<br />
0 = no reject<br />
<br />
===== block_same_name =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_name = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same name, default = 1<br />
0 = no reject<br />
<br />
==== Cache ====<br />
<br />
===== cachedelay =====<br />
{{optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
===== max_cache_time =====<br />
<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
===== max_cache_count =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = count, default 1000<br />
<br />
maximum CWs in cache<br />
<br />
===== cacheexwaittime =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
maximum wait time for a cache entry in milli seconds, default:50 <br />
<br />
===== cacheexenablestats =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== Client ====<br />
<br />
===== clienttimeout =====<br />
{{Optional/en}}<br />
<br />
value in milli-seconds for client process to wait for key<br />
<br />
Examples:<br />
clienttimeout = 10000 # after 10 seconds timeout<br />
clienttimeout = 10 # timeout after 10 milli-seconds! (see Tip below)<br />
clienttimeout = 8 # timeout after 8000 milli-seconds (= 8 seconds), see Tip below<br />
Default:<br />
clienttimeout = 5000 # timeout after 5000 milli-seconds (=5 seconds)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Values < 10 (so 1 to 9) are multiplicated with 1000, so a "5" results in 5000 ms.<br />
<br />
===== clientmaxidle =====<br />
{{Optional/en}}<br />
<br />
value for client process being idle before disconnect in seconds<br />
<br />
Example:<br />
clientmaxidle = 200 # Disconnect after 200 seconds<br />
= 0 # idle disconnect disabled<br />
<br />
Default:<br />
clientmaxidle = 120 # Disconnect after 120 seconds<br />
<br />
===== suppresscmd08 =====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35[cs3.57x]-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
==== fallbacktimeout ====<br />
{{Depends/en}}<br />
<br />
At several readers (see Chapter [reader] in oscam.server) one reader can be defined to them, for example in case of failure of the other readers, the traffic falls back.<br />
Maximum waiting time of the [[Cardserver]]s in milliseconds for primary [[Reader]], before [[Fallback]]-Reader (if any!) are questioned.<br />
<br />
Example:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The value must be greater than the value in "serialreadertimeout", otherwise the default is used.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = milliseconds <br />
<br />
time falling back to CAID restricted fallback reader, default: 2500<br />
<br />
<br />
<br />
==== sleep ====<br />
{{Optional/en}}<br />
<br />
time waiting for inactive users in minues, can be overwritten per user in oscam.user<br />
<br />
Example:<br />
sleep = 5 # waiting time 5 minutes<br />
<br />
Default:<br />
sleep = # [blank] no waiting time<br />
<br />
==== serverip ====<br />
{{optional/en}}<br />
<br />
Bind service to specified IP-address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam listen to all IP's<br />
<br />
==== bindwait ====<br />
{{Optional/en}}<br />
<br />
value in seconds to wait for bind request to complete. If OSCam within this time can not bind, he finished with "Bind Request failed".<br />
<br />
Causes may include:<br />
* Double assignment of ports<br />
* "crashed" OSCam has not released the ports again<br />
* OSCam was started serveral times while<br />
<br />
Example:<br />
bindwait = 20 # waiting time 20 seconds<br />
<br />
Default:<br />
bindwait = 120 # waiting time 120 seconds<br />
<br />
==== netprio ====<br />
{{Optional/en}}<br />
<br />
network priority - This sets the value of SO_PRIORITY on network connections. Basically this leads to setting the TOS fields of the sent IP packages so that QoS can be better used.<br />
<br />
Beispiel:<br />
netprio = 1 # Priority 1<br />
<br />
Default:<br />
netprio = 0 # system given<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional/en}}<br />
<br />
set mode for DNS resolving: These are different libc calls to resolve dns names and some older systems have problems with the newer implementation ''getadressinfo'' (getadressinfo is also threadsafe whereas ''gethostbyname'' is not and thus it has some locks around) or have stripped them from their images (dbox2 was such a candidate I think) even though it is available at compile time. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Example:<br />
resolvegethostbyname = 1 # gethostbyname<br />
<br />
Default:<br />
resolvegethostbyname = 0 # adressinfo system given<br />
<br />
==== failbantime ====<br />
{{Optional/en}}<br />
<br />
time for IP based blocking for clients with an invalid login attempt in minutes<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP will be blocked for 5 minutes. New logins are denied.<br />
# no clientthread will be created.<br />
<br />
Default:<br />
failbantime = 0 # failban off (default)<br />
<br />
==== failbancount ====<br />
{{Optional/en}}<br />
<br />
Failbancount = Number of allowed failed attempts with incorrect data <br />
= 0 (default) IP is now blocked on the first try with incorrect data!<br />
<br />
If within '''failbantime''' more than in '''failbancount''' allowed trials to be registered, the IP for the remainder failbantime is locked. After a period of failbantime are again full failbancount available. Failbancount is thus a relaxation of rules!<br />
<br />
==== dropdups ====<br />
{{Optional/en}}<br />
<br />
mode for duplicate client connections<br />
<br />
0 = mark client as duplicate, but don't disconnect them (default)<br />
1 = drop duplicate connections instead of marking as duplicate<br />
<br />
==== unlockparental ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7289:08/27/2012</span><br />
<br />
'''Only Seca and Viaccess'''<br />
<br />
unlock parental mode option to disable pin code request for adult movie.<br />
In order to work properly, this option may required that you define the card PIN code in your card reader configuration.<br />
<br />
Example:<br />
unlockparental = 1 # parental lock mode disabled<br />
<br />
Default:<br />
unlockparental = 0 # parental lock mode enabled<br />
<br />
==== double_check ====<br />
{{Optional/en}}<br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other, lb_nbest_readers must be set to 2 or higher<br />
<br />
Example:<br />
double_check = 1 # on<br />
<br />
Default:<br />
double_check = 0 # off<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|first two digits of CAID1],[CAID2|first two digits of CAID2]... <br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other for defined CAID or first two bytes of CAID, lb_nbest_readers must be set to 2 or higher, default:none <br />
<br />
<br />
<br />
==== Loadbalancer ====<br />
<br />
===== lb_mode =====<br />
{{Optional/en}}<br />
<br />
'''loadbalance mode'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If load balancing is activated here, it may in oscam.server among services and ident are '''no entries'''!<br />
<br />
If there are 2 or more of the same SC, the load can be distributed evenly on the cards. For more see [[OSCam/en/Loadbalancing|Loadbalancing]]<br />
<br />
Example:<br />
lb_mode = 0 loadbalance disabled, ECMs go to all readers<br />
lb_mode = 1 fastest reader first, after 5 ECMs the reader with the fastest response time will be selected<br />
lb_mode = 2 oldest reader first, reader with the longest no answer<br />
lb_mode = 3 lowest usage level, the usage level will be calculated by the sum of 5 ECMS response times, the higher a reader is busy, the higher is usage level<br />
lb_mode = 10 LB is switched off, but statistics are build<br />
<br />
<br />
Default:<br />
lb_mode = 0 # disabled<br />
<br />
===== lb_save =====<br />
{{Optional/en}}<br />
<br />
Save autoloadbalance statistics (counts). To save CPU power a minimum counts of 100 is recommended.<br />
<br />
Example:<br />
lb_save = 100 # counts of ECM's after statistics are saved<br />
<br />
Default:<br />
lb_save = 0 # no svae<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional/en}}<br />
<br />
set count of best readers for loadbalancing.<br />
<br />
Example:<br />
lb_nbest_readers = 2 # requests always go to two reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # requests go to one reader<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional/en}}<br />
<br />
set count of fallback readers for loadbalancing<br />
<br />
Example:<br />
lb_nfb_readers = 2 # two fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1 # one fallbackreader<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mode:<br />
= 0 # standard late reopening of blocker readers (default)<br />
= 1 # fast reopening of blocker readers<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5893:08/19/2011</span><br />
<br />
Set count of best readers per CAIDs for loadbalancing, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
<br />
lb_nbest_percaid = # number<br />
= [blank] # none (default)<br />
<br />
example: <br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wiil be blocked until statistics has been cleaned<br />
1 = default<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = force reopening immidiatly all failing readers if no matching was found<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional/en}}<br />
<br />
minimal ECM count to evaluate loadbalancing values<br />
<br />
Example:<br />
lb_min_ecmcount = 2 # 2 counts<br />
<br />
Default:<br />
lb_min_ecmcount = 5 # 5 counts<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional/en}}<br />
<br />
Maximum ECM count before resetting loadbalancing values.<br />
<br />
Example:<br />
lb_max_ecmcount = 200 # 200 counts<br />
<br />
Default:<br />
lb_max_ecmcount = 500 # 500 counts<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional/en}}<br />
<br />
time in seconds between retrying failed readers/CAIDs/providers/services<br />
<br />
Example:<br />
lb_reopen_seconds = 500 # retry after 500 seconds<br />
<br />
Default:<br />
lb_reopen_seconds = 900 # retry after 900 seconds<br />
<br />
===== lb_retrylimit =====<br />
{{Optional/en}}<br />
<br />
Retry next readers '''only''' if response time is higher then lb_retrylimit in '''milli seconds'''.<br />
<br />
Example:<br />
lb_retrylimit = 500 # retry next reader only, if response time is higher than 500 ms<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
===== lb_savepath ===== <br />
{{Optional/en}}<br />
<br />
Filenanme for saving loadbalancing statistics<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional/en}}<br />
<br />
hours after the loadbalancing statistics will be deleted<br />
<br />
default = 336<br />
<br />
===== lb_use_locking =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6166:12/28/2011</span><br />
<br />
disable parallel and identical ECM requests<br />
<br />
<br />
1 = on<br />
0 = off # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* You should choose this option only if:<br />
** slow system<br />
** high load<br />
** the same ECM requests come not from the cache, but will continue to the confirmed reader.<br />
<br />
* Adventages, if activated:<br />
** By synchronizing, an ECM request made by one. The identification of cache or request and assignment of the reader by loadbalancer is always successful.<br />
<br />
* Disadventages, if activated:<br />
** The synchronisation prevents multithreading and the probability of higher response times.<br />
<br />
* Adventages, if NOT activated:<br />
** Faster transit times for ECM requests<br />
<br />
* Disadventages, if NOT activated:<br />
** May have dual (n-fold) possible requests to the readers.<br />
<br/><br />
<br />
===== lb_retrylimits =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn:5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,Caid2:time2]...<br />
<br />
loadbalancing retry limit time per CAID in milliseconds, wilcard CAIDs with 2-digit Caids possible<br />
<br />
default = none<br />
<br />
example: <br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
ignore provider information CAIDs to reduce statistic date, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
example: <br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
default = none<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # enable automatic timeout based on load balancing statistics<br />
= 0 # default<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = percent<br />
<br />
percent added to average time as timeout time<br />
default = 30<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = milli seconds<br />
<br />
minimal time added to average time as timeout time<br />
default = 300<br />
<br />
===== lb_max_readers =====<br />
{{Optional/en}}<br />
<br />
lb_max_readers = limit (number)<br />
<br />
restrict the reader count to limit during learning<br />
<br />
0 = unlimited (default)<br />
x = restrict loadbalancer readers to limit x (number)<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional/en}}<br />
<br />
lb_auto_betatunnel = 0|1<br />
<br />
enable automatic Betacrypt tunneling for CAIDs 1801, 1833, 1834 and 1835 in loadbalancing mode<br />
lb_auto_betatunnel = 0 # disabled<br />
= 1 # enabled (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Betacrypt definition in oscam.user with betatunnel will be prefered [[streamboard:wiki/OSCam/en/Config/oscam.user#betatunnel|User-Betatunnel]]!<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
set mode for automatic Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only) <br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = number<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = always Betacrypt<br />
105 = represents the middle<br />
200 = always Nagravision<br />
<br />
=== Monitor ===<br />
'''Only if monitor is used!'''<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
==== port ====<br />
{{Optional/en}}<br />
UDP port for monitor<br />
port = 0 # monitor disabled<br />
= # port number<br />
<br />
Beispiel:<br />
port = 24480 # monitor on, port = 24480<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
serverip = # IP adress<br />
= # [blank] all IP's (default)<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured monitor connection<br />
[,IP address|IP address range]...<br />
<br />
Possible<br />
* one or more IP adresses<br />
* one or more IP adress ranges<br />
* mixture of IP adresses and IP adress ranges<br />
<br />
Example<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 and IP range 192.168.0.0 to 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] no secured monitor connection<br />
<br />
==== aulow ====<br />
{{Optional/en}}<br />
<br />
time no EMM occurs so that client is set to low in minutes<br />
<br />
Example<br />
aulow = 30 # After 30 minutes whithout EMM client will be switched from "active" to "on" (default).<br />
<br />
==== monlevel ====<br />
{{Optional/en}}<br />
<br />
monitor-level<br />
0 = no access to monitor (default)<br />
1 = only server and own procs<br />
2 = all procs, but viewing only<br />
3 = all procs, reload of oscam.user possible<br />
4 = complete access<br />
<br />
Example<br />
monlevel = 4 # complete access<br />
<br />
monlevel can be overwritten per user in oscam.user!<br />
<br />
==== appendchaninfo ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8546:03/13/2013<br />
</span><br />
<br />
Append channel name on log messages. Very useful when using [webif]!<br />
appendchaninfo = 1 # append chanel name<br />
= 0 # no append chanel name (default)<br />
<br />
=== lcd ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
==== lcd_outputpath ====<br />
{{Optional/en}}<br />
<br />
Path for LCD output<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
==== lcd_hideidle ====<br />
{{Optional/en}}<br />
<br />
hide reader in LCD output if reader idle > 20 seconds, default:0 <br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional/en}}<br />
<br />
LCD refresh interval (minimum 5), default:10<br />
<br />
=== WebIf ===<br />
'''Only if WebIf is used!'''<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
==== File format to send EMMs via the webinterface ====<br />
(by Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention'''<br />
<br />
* File has to be in TXT format.<br />
* The EMM-file should contain each PRE-CAM EMM in a new line.<br />
* EMMs should be in HEX representation.<br />
** Example: AABBCCDD...<br />
*Spaces and tabs between the bytes are allowed:<br />
**AA BB CC DD...<br />
*The HEX representation of each EMM's byte can be represented by upper or lower case - even mixed is allowed:<br />
**AA aa Aa aA...<br />
*Other chars and comments are not allowed.<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
<br />
default is 8888 if no httpport is set<br />
port for web interface,<br />
0 = disabled, praefix + = enable SSL<br />
<br />
Example<br />
httpport = 83 # Webinterface listening on '''http-port 83'''<br />
= +83 # Webinterface listening on '''https-port 83''' (SSL)<br />
0 # Webinterface disabled<br />
<br />
==== httpcert ====<br />
{{Optional/en}}<br />
<br />
file for http SSL certificate<br />
httpcert = oscam.cert # (look there)<br />
= # [blank] file oscam.pem (embedded) is used<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
example<br />
httpforcesslv3 = 0 none (default)<br />
= 1 force using SSLV3<br />
<br />
==== httpuser ====<br />
{{Optional/en}}<br />
<br />
Username for password protection. [blank] is default, of which is strongly discouraged! <br />
httpuser = # xyxyxy (all characters and figures are allowed)<br />
<br />
==== httppwd ====<br />
{{Optional/en}}<br />
<br />
Password for password protection. It is the same as for httpuser.<br />
httppwd = # 123456<br />
<br />
'''The ''user'' and ''pwd'' parameters are queried when connecting to the webinterface in a messagebox. If they are missing ore corrupted a message ''Forbidden'' appears and the connection is aborted!'''<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6625:05/15/2012</span><br />
<br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Do not add the content of the embedded CSS before the content of the custom CSS (default)<br />
1 # embedded CSS will be added before external custom CSS (specified by the [[#httpcss|httpcss]] parameter)<br />
<br />
This parameter can be used to override the embedded CSS with custom styles. To see the current CSS styles use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
==== httpcss ====<br />
{{Optional/en}}<br />
<br />
path for external CSS file<br />
<br />
For webinterface different styles are available. Put custom CSS files (ending with .css extension) in the oscam config directory to managed your custom styles with WebIf.<br />
<br />
Example<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] embedded style is used (default)<br />
<br />
To see the current CSS style, use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
Styles you find here: [[Streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
==== httptpl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7083:06/25/2012</span><br />
<br />
path for external templates and picons<br />
httptpl =<br />
= # [blank] No external templates<br />
<br />
path for external templates and picons, multiple simultaneously templates and picons are possible by creat‐ <br />
ing sub folders (maximum length of 32 alphanumeric characters), sub folders naming is corresponding to sub <br />
folder in URL, default:none <br />
<br />
example <br />
httptpl = /this/is/my/path <br />
<br />
folder with multiple templates: <br />
/this/is/my/path/template<br />
/this/is/my/path/template2 <br />
<br />
valid URLs: <br />
http://host:port/template1 <br />
http://host:port/template2<br />
<br/><br />
<br/><br />
==== httpoverwritebakfile ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = overwrite backup configurations files (*.bak)<br />
0 = default<br />
<br/><br />
<br/><br />
<br />
<br />
<br />
==== httplocale ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
set the "locale environment"<br />
<br />
default = blank [none]<br />
<br />
look here::<br />
<br />
http://en.wikipedia.org/wiki/locale<br />
<br />
==== httpjscript ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
path for oscam.js javascript, def: none<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional/en}}<br />
<br />
status refresh in seconds<br />
<br />
httprefresh = 7 # status will be refreshed after 7 seconds<br />
= # [blank] no refreshing<br />
<br />
==== httppollrefresh ====<br />
{{Optional/en}}<br />
<br />
refreshtime for polling in seconds<br />
<br />
httppollrefresh = 60 # polling will be refreshed after 60 seconds<br />
= # [blank|0] no refreshing poll<br />
<br />
==== httpshowpicons ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # show picons in userlist<br />
0 # default<br />
<br />
If this parameter is enables, then a new column is added to the USERS tab which display the picons of the last watched channels by active users. The folder where the picons must be configured in the httppiconpath.<br />
<br />
Possible format are:<br />
IC_caid_srvid.tpl<br />
IC_caid_provid_srvid.tpl<br />
IC_servicename.tpl<br />
<br />
added support for picons by channel name<br /><br />
syntax is:<br /><br />
take service-name from oscam.srvid,<br /><br />
replace all upper-case letters with lower case,<br /><br />
replace * with star,<br /><br />
replace & with and,<br /><br />
replace + with plus,<br /><br />
remove everything but a-z and 0-9,<br /><br />
if the result is name, the picon file will be IC_name.tpl<br /><br />
for example:<br /><br />
service-name "BBC-ONE +HD"<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
if service-name ends with hd, and picon is not found, fallback to name without hd, example:<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
-> not found, search for:<br /><br />
picon file: "IC_bbconeplus.tpl"<br /><br />
<br />
==== httphideidleclients ====<br />
{{Optional/en}}<br />
<br />
Enables hiding clients after idle time set with parameter ''' hideclient_to''' in section [monitor].<br />
httphideidleclients = 1 # hide<br />
= 0 # hide not (default)<br />
<br />
==== hideclient_to ====<br />
{{Optional/en}}<br />
<br />
Time to hide clients in the monitor if not sending requests. See also parameter '''httphideidleclienst''' in section [webif].<br />
hideclient_to = 1 # hide clients<br />
= 0 # no hide<br />
<br />
==== httphidetype ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
type = letter which defines types to hide in web interface status page (see Typ column), <br />
default: none. s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
==== httpscript ====<br />
{{Optional/en}}<br />
<br />
Path to an executable script which you wish to start from web interface<br />
httpscript = # path<br />
= # [blank] no path<br />
<br />
You can run script file from script.html (SCRIPTS item in main menu)<br /><br />
If the script file contains the "echo" will be it displayed in a Web interface.<br />
<br />
If the file can not run displays<br />
[Error]: Script "name_of_script.sh" not executable!<br />
<br />
If does not exist script displays<br />
[Error]: Script "name_of_script.sh" not found!<br />
(Works If you delete the script and refresh page)<br />
<br />
==== httpallowed ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8842:08/17/2013</span><br />
<br />
http web interface connections allowed. [blank] is allowed (default), but that makes no sense! If the webinterface to be used, then there must be a way to connect with him. Therefore we declare this parameter as '''mandatory'''!<br />
<br />
With '''::1''' OSCam decides to resolve 'localhost' to '''IPv6'''!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
<br />
<br />
Example<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host and range 192.168.0 are allowed<br />
resolving to IPv6<br />
<br />
'''default values'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1<br />
<br />
==== httpdyndns ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6558:03/21/12</span><br />
<br />
http web interface connections allowed<br />
<br />
httpdyndns = hostname [,hostnahme][,hostname]<br />
<br />
Example<br />
httpdyndns = host1.example.com,host2.example.com<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional/en}}<br />
<br />
write config:<br />
0 = all not empty parameters, all not default parameters, all parameters not containing the same value as the same parameter in global configuration (default)<br />
1 = all parameters<br />
<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional/en}}<br />
<br />
read only modus for web interface<br />
<br />
httpreadonly = 1 # only read<br />
= 0 # all is possible (default)<br />
<br />
<br />
==== httppiconpath ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9463/01/28/2014</span><br />
<br />
httppiconpath = path<br />
<br />
path to picons, default [blank] none<br />
<br />
====httphelplang====<br />
{{required}}<br />
<br />
set right language for wiki entry point<br />
de|en|fr <available wiki languages><br />
<br />
==== httposcamlabel ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
set individual label in web interface header, default: OSCam<br />
<br />
==== http_status_log ====<br />
{{Optional/en}}<br />
<br />
http_status_log = 0|1<br />
1 = display log in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowreaderinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowreaderinfo = 0|1<br />
1 = display readers informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowecminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowecminfo = 0|1<br />
1 = display readers and users ECM informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowuserinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowuserinfo = 0|1<br />
1 = display users informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowcacheexinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowcacheexinfo = 0|1<br />
1 = display CacheEX informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowmeminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowmeminfo = 0|1<br />
1 = display memory usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowloadinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowloadinfo = 0|1<br />
1 = display load average and CPU usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
<br/><br />
<br/><br />
<br />
=== [cache] ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW since svn 8358:02/16/2013</span><br />
<br />
{{OSCamConfCacheParameter}}<br />
<br />
<br />
==== delay ====<br />
{{optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
==== max_time ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
==== max_hit_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8910:09/10/2013</span><br />
<br />
max_hit_time = in seconds<br />
<br />
maximum time for cache exchange hits resists in cach for evaluating wait_time, default: 15<br />
<br />
<br />
<br />
==== wait_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 8077:01/06/2013</span><br />
<br />
wait_time = milli-seconds<br />
= [blank] none (default)<br />
<br />
wait time for cache exchange (mode 2 & 3 only!)and Cardserverproxy before sending ECM to reader or proxy<br />
<br />
Example:<br />
0:50:250,0200@00009X:50:150:950,0500@000001:150:1602&ffdf:1200<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional/en}}<br />
<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode:<br />
specify behaviour for counter parameter<br />
<br />
0 = when wait_time expires, serve highest counter's cw got anyway, even if no counter reached.<br />
1 = never serve cw (coming from cacheex) stored in cache if its counter not reaches counter. When wait_time expires, requests<br />
will go to normal readers! Only when a cw reaches counter, it can be served to clients.<br />
<br />
Default = 0<br />
<br />
<br />
* counter:<br />
set minimum cw counter to allow cw is used.<br />
<br />
Default = 1 (use default behaviour: use cw with highest counter when cache is checked)<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = allow bad cycles from a fixed fallback reader. Default = 0<br />
<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== csp_port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
This is a UDP ('''not TCP''') listen port for incoming traffic from csp nodes<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
==== csp_serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
This is the local bind IP of csp_port (see above!)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 disable (default)<br />
= 1 enable<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: not for all NDS SC's!'''<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID enabled for CW cycle check, default: none<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = count<br />
<br />
maximum CW cycle list entries, default = 500, maximum = 4000<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = minutes<br />
<br />
minimum time a learned cycletime resists in memory, default = 0, maximum = 15<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = log bad CW cycle only <br />
1 = drop bad CW cycle (default)<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, <br />
1 = drop old CW cycle, <br />
0 = no drop(default)<br />
<br/><br />
==== cwcycle_sensitive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (or more) same bytes and drop new CW<br />
3 = 3 (or more) same bytes and drop new CW<br />
4 = 4 (or more) same bytes and drop new CW<br />
<br />
<br/><br />
==== cwcycle_usecwcfromce ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = use CW Info from cache exchange<br />
0 = default<br />
<br/><br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
answer when cache exchange timeount expires, if no normal readers are vavailable for sending ECM's::<br />
<br />
0 = immediatly send '''not found''' to client (default)<br />
1 = wait for cache exchange answer until client timeout expires<br />
<br />
<br/><br />
<br/><br />
<br />
<br/><br />
<br />
=== csp (UDP) ===<br />
Section only needed if using cache exchange<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:02/16/2013 look at '''[cache]'''!</span><br />
<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6124:12/23/2011</span><br />
<br />
UDP listen port for incoming traffic from csp nodes<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
==== serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6124:12/23/2011</span><br />
<br />
Local bind IP of the above udp port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
=== Camd 33 (TCP) ===<br />
Section required only if camd33 will be used as client protocol!<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for camd 3.3x clients, 0 = disabled, default:0<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # listenig to all<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured camd 3.3x client connection<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
Example:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt = [none]<br />
<br />
==== passive ====<br />
{{Optional/en}}<br />
<br />
force passive camd 3.3x client<br />
<br />
Camd3.3x protocol generally has aktive clients. In certain circumstances the client must switched on only "passive" mode.<br />
<br />
Example:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
==== key ====<br />
{{Optional/en}}<br />
128 bit key<br />
<br />
key for camd 3.3x client encryption<br />
<br />
<br />
Example:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key = # (blank] none (default)<br />
<br />
=== cs357x (UDP) ===<br />
Section required only if cs357x will be used as client protocol! These protocols principle encrypt and build the key from user name.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''cs357x''' was also known as '''camd35''' designated. Both terms mean the same protocol with the same functions and parameters. In the future, to avoid confusion '''only cs357x''' is used.<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
UDP port for camd 3.5x|cs357x clients. Port must be opened at router!<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35|cs3.57x-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== cs378x (TCP) ===<br />
Section required only if cs378x (camd 3.5x in TCP) will be used as client protocol!<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
Port(s) TCP for Cs378x clients (camd 3.5x in TCP mode). Port(s) must be opened at router!<br />
<br />
port@CAID[:ident][,ident]...[;port@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@0500:030B00;22764@0648<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell cs3.78x clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disable<br />
<br />
<br />
Mor here: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== Newcamd (TCP) ===<br />
Section required only if newcamd will be used as client protocol!<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
==== key ====<br />
{{required}}<br />
DES key<br />
Default key for newcamd client encryption.<br />
<br />
Example:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
==== port ====<br />
{{required}}<br />
TCP port/DES key/CAID/ident definitions. Each CAID requires a separate port. If you don't specify a DES key for a port, the default DES Key will be used!<br />
<br />
port[{DES key}]@CAID[:ident][,ident]...[;port[{DES key}]@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@1234:000000 # (CAID 1234 connected with port 15000)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 connected with port 15000. CAID 5678 with port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = [blank]<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
!! Dyn DNS Addresses are not forseen here and won't work !!<br />
<br />
Example:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed = [blank]<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<br />
Example:<br />
keepalive = 1 # (enabled)<br />
keepalive = 0 # (disabled)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
==== mgclient ====<br />
{{Optional/en}}<br />
<br />
Enable mgcamd extended newcamd protocol, allowing for a single connection to work with mutliple providers, default:0<br />
<br />
Example:<br />
mgclient = 1 # (enabled)<br />
mgclient = 0 # (disabled)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br/><br />
<br/><br />
=== '''scam''' ===<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9878:09/29/2014</span><br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port = port<br />
<br />
UDP port for scam server, default = 0<br />
<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br/><br />
<br/><br />
<br />
=== Radegast ===<br />
Section required only if radegast will be used as client protocol!<br />
<br />
{{OSCamConfRadegastParameter}}<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for radegast clients (enables radegast)<br />
port =<br />
= 0 (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br />
==== user ====<br />
{{required}}<br />
<br />
user name for radegast client<br />
user = username<br />
<br />
=== Serial ===<br />
Section required only if seral interface will be used!<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
==== device ====<br />
{{Optional/en}}<br />
<br />
Parameter of device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = name of Serial Device<br />
option = timeout = milli seconds timeout for connection default: 50<br />
= delay milli seconds additive between 2 characters<br />
<br />
supported serial devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
=== Cccam (TCP) ===<br />
Section required only if Cccam will be used as client protocol!<br />
{{OSCamConfCccamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6206:01/07/2012</span><br />
<br />
Port = 0|port[,port...]<br />
<br />
TCP/IP-Ports for CCcam clients, enables Cccam protocol!<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled (default)<br />
<br />
==== version ====<br />
{{Optional/en}}<br />
<br />
<br />
define CCcam version, minimum CCcam version 2.0.11, used with original CCcam only, default:none<br />
<br />
<nowiki><main version>,<version>,<sub version></nowiki><br />
<br />
Example:<br />
version = 2.0.11<br />
<br />
==== reshare ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
reshare level for CCcam clients:<br />
-1 = no resharing<br />
0 = resharing for direct peer only<br />
1 = resharing for direct peer and next level<br />
x = resharing for direct peer and next x level (x for number of level)<br />
10 = (default)<br />
<br />
Example:<br />
reshare = 1 resharing only for direct peer and next level<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
==== reshare_mode ====<br />
{{Optional/en}}<br />
<br />
CCcam reshare mode<br />
0 = reader reshares only received SCs for CCcam readers,<br />
defined filters/CAIDs/idents on other readers (default)<br />
1 = reader reshares received SCs (like=0) and defined services<br />
2 = reader reshares only defined reader services as virtual SCs<br />
3 = reader reshares only defined user services as virtual SCs<br />
4 = reader reshares only received cards<br />
<br />
Every server is shared as hop=0 and with defined reshare values.<br />
<br />
Service reshare only works if positive services defined: no service - no reshare!<br />
<br />
==== ignorereshare ====<br />
{{Optional/en}}<br />
<br />
<br />
CCcam reshare setting:<br />
0 = use reshare setting of server (default)<br />
1 = use reshare setting of reader or user<br />
<br />
Example:<br />
ignorereshare = 1 reshare settings of reader or user are used<br />
<br />
==== stealth ====<br />
{{Optional/en}}<br />
<br />
Behaviour like the original CCcam: no activate partner detection and extended OSCam-CCcam protocol, prevent other OSCam to detect the server as OSCam server.<br />
<br />
stealth = 1 # stealth enabled<br />
= 0 # stealth disabled (default)<br />
<br />
==== minimizecards ====<br />
{{Optional/en}}<br />
<br />
mode how to provide CCcam servers to CCcam clients:<br />
0 = no aggregation, remove duplicates only (default)<br />
1 = based on minimum hop: two SCs with different hops are summarized, new SCs get a smaller hop<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional/en}}<br />
<br />
<br />
interval to provide share list update to CCcam clients in seconds<br />
0 = update based on server updates, values <= 10 are invalid and will be set to 30 <br />
= [blank] 240 (default)<br />
<br />
==== keepconnected ====<br />
{{Optional/en}}<br />
<br />
set CCcam keepalive modus:<br />
0 = disconnect client when max idle time is reached<br />
1 = keep client connected (default)<br />
<br />
==== recv_timeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7672:10/09/2012</span><br />
<br />
recv_timeout = milli-seconds<br />
<br />
set network timeout for receiving data<br />
default = 2000<br />
<br />
==== forward_origin_card ====<br />
{{Optional/en}}<br />
<br />
forward_origin_card = 0|1<br />
<br />
1 = forward ECM request to reader holding this card, loadbalancer, fallback and caching will be disabled <br />
0 = default<br />
<br />
==== nodeid ====<br />
{{Optional/en}}<br />
<br />
nodeid = ID<br />
<br />
set CCcam node ID in hex, default:none<br />
<br />
example<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br/><br />
=== Pandora ===<br />
{{OSCamConfPandoraParameter}}<br />
<br />
==== pand_skip_send_dw ====<br />
<br />
<br />
pand_skip_send_dw = dummy<br />
<br />
<br />
==== pand_allowed ====<br />
<br />
<br />
pand_aloowed = dummy<br />
<br />
<br />
==== pand_usr ====<br />
<br />
<br />
pand_user = dummy<br />
<br />
<br />
==== pand_pass ====<br />
<br />
<br />
pand_pass = dummy<br />
<br />
<br />
==== pand_ecm ====<br />
<br />
<br />
pand_ecm = dummy<br />
<br />
<br />
==== pand_port ====<br />
<br />
<br />
pand_port = dummy<br />
<br />
<br />
==== pand_srvid ====<br />
<br />
pand_srvid = dummy<br />
<br />
<br/><br />
<br/><br />
<br />
=== GBox ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
{{OScamConfGboxParameter}}<br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 {3 3}}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== hostname ====<br />
{{required}}<br />
<br />
hostname = my IP or ddns<br />
<br />
examples:<br />
hostname = 192.168.1.120<br />
hostname = willy.noip.org<br />
<br />
<br/><br />
<br />
==== my_password ====<br />
{{required}}<br />
<br />
my_password = 4 hex bytes, 8 chara<br />
<br />
example:<br />
my_password = 98AF3E25<br />
<br />
<br/><br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port= define incoming UDP port(s) used by Gbox protocol<br />
<br />
port= port#1[[,port#2]...[,port#32]]<br />
<br />
Maximum 32 ports.<br />
<br />
<br/><br />
<br />
==== proxy_card ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy reader card(s) to be reshared into gbox network, default = none<br />
<br />
proxy_card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
example:<br />
<br />
proxy_card = 18300000,0D950400,05050F00 <br />
<br />
<br/><br />
<br />
==== ccc_reshare ====<br />
{{Optional/en}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = enable cccam-cards to be reshared into gbox network, default = 0 (global setting)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' must set up caids to be reshared in 'ccc_gbx_caid ='<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' unique peer reshare level to be set in oscam.server [reader]-> cccam_reshare<br />
<br />
<br/><br />
<br />
==== ccc_gbx_caid ====<br />
{{Optional/en}}<br />
<br />
ccc_gbx_caid = caid_1,caid_2,...<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' 'ccc_reshare' must be set as well<br />
<br />
<br/><br />
<br />
==== my_vers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9645:04/09/2014</span><br />
<br />
<br />
my_vers = version<br />
<br />
set gbox version hexadecimal low byte<br />
<br />
default = 2A<br />
<br />
<br/><br />
<br />
==== my_cpu_api ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9712:05/11/2014</span><br />
<br />
<br />
my-cpu_api = byte<br />
<br />
set gbox CPU and API byte in hexadecimal, default = 40<br />
default = 40<br />
<br />
<br/><br />
<br />
==== gbox_reconnect ====<br />
{{Optional/en}}<br />
<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min:60, max:300<br />
<br />
<br/><br />
<br />
==== accept_remm_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11399:29/01/2018</span><br />
<br />
Accept to send Remote EMMs to specified Server Peer-IDs<br />
<br />
accept_remm_peer = peer#1[[,peer#2]...[,peer#8]]<br />
<br />
<br/><br />
<br />
==== dis_attack_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11360:16/02/2017</span><br />
<br />
Disable creation of attack.txt<br />
<br />
dis_attack_txt = 0|1 - default: 0 <br />
<br />
<br/><br />
<br />
==== log_hello ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11231:20/04/2016</span><br />
<br />
Display hello messages in debug log<br />
<br />
log_hello = 0|1 - default: 1 <br />
<br />
<br/><br />
<br />
==== ignore_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Ignore specific peer ID(s) totally. Login rejected.<br />
<br />
ignore_peer = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== block_ecm ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Block ECM for specific peer ID(s).<br />
<br />
block_ecm = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== tmp_dir ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/2014</span><br />
<br />
gbox tempory directory<br />
<br />
tmp_dir = /path/to/dir <br />
<br />
default: /tmp/.oscam<br />
<br />
<br/><br />
<br />
==== gsms_disable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9714:05/11/2014</span><br />
<br />
<br />
gsms_disable = 0|1<br />
<br />
0 - Gbox Short Message Service (GSMS) is enabled<br/><br />
1 - disable gbox short message service (GSMS)<br/><br />
<br />
default = 1<br />
<br />
<br/><br />
<br/><br />
<br />
==== gbox_save_gsms ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_save_gsms=0|1<br />
<br />
0 = don't save GSMS in configuration<br/><br />
1 = save all GSMS field in configuration<br />
<br />
You need to press save button to really save it!<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_type=0|1<br />
<br />
0 = normal text message<br/><br />
1 = normal text message + OSD (On Screen Display)<br />
<br/><br />
<br/><br />
<br />
==== gbox_dest_peers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_dest_peers = [BOXID[,BOXID]...[,BOXID]]<br />
<br />
Maximum 16 * 2 bytes (4 hexa digits), comma-separated. For broadcast to all use FFFF.<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_txt=Your text to send to peers.<br />
<br />
From 6 to 127 alphanumerical characters.<br />
<br/><br />
<br/><br />
<br />
=== DVBapi ===<br />
{{Optional/en}}<br />
<br />
Section required only if OSCam will also be used as client!<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional/en}}<br />
<br />
DVB API enabled<br />
<br />
Example:<br />
enabled = 0 # disabled (default)<br />
enabled = 1 # enabled<br />
<br />
==== user ====<br />
{{required}}<br />
user name for DVB API client<br />
Example:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
==== au ====<br />
{{Optional/en}}<br />
<br />
AU mode for dvbapi:<br />
au = 0 # disable AU (default)<br />
au = 1 # enable AU<br />
<br />
==== pmt_mode ====<br />
{{Optional/en}}<br />
PMT mode:<br />
pmt_mode = 0 # use camd.socket and PMT file (default)<br />
pmt_mode = 1 # disable reading PMT file<br />
pmt_mode = 2 # disable camd.socket<br />
pmt_mode = 3 # read PMT file on startup only<br />
pmt_mode = 4 # do not use signal handler for monitoring /tmp<br />
pmt_mode = 5 # do not use signal handler to monitor /tmp & disable camd.socket<br />
pmt_mode = 6 # use PMT server mode <span style="background-color:Green;color:White;padding:0 5px;">NEU - NEW - NOUVEAU - NUOVO svn8680:05/06/2013</span><br />
<br />
==== request_mode ====<br />
{{Optional/en}}<br />
CAID request mode:<br />
0 = try all possible CAIDs one by one (default)<br />
1 = try all CAIDs simultaneously<br />
<br />
==== listen_port ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP/IP port for SAT IP clients, filtering has to be done on client site<br />
<br />
0 = disabled (default)<br />
<br />
==== boxtype ====<br />
{{required}}<br />
set boxtype, auto detection of DVB API will be aspired:<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt|qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
ipbox with camd.socket support, currently only with PGI image version 0.6 or above, verified on HD models only<br />
<br />
ipbox-pmt can be used on any DGS based images (with or without camd.socket support), verified on HD models only<br />
<br />
pc is for generic pc support (currently supported on VDR with vdr-plugin-dvbapi)<br />
<br />
==== cw_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
cw_delay = milli-seconds<br />
<br />
delay of CW writing, default = none<br />
<br />
==== delayer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6808:05/14/2012</span><br />
<br />
delayer = milli-seconds<br />
<br />
minimum time to write CW<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
= 1 reopen demux devices in each channel switching,<br />
= 0 default<br />
<br />
==== decodeforever ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = trying to decode on all CAIDs<br />
0 = default<br />
<br />
==== ecminfo_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10722:06/13/15</span><br />
<br />
Define the type of ecm.info file to create, ecminfo_type = 0|1|2|3|4|5<br />
<br />
0 = default oscam syntax<br />
1 = default oscam syntax with ecmtime in ms instead of s<br />
2 = wicardd<br />
3 = mgcamd<br />
4 = cccam<br />
5 = camd3<br />
<br />
==== read_sdt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10766:06/15/15</span><br />
<br />
If it is not yet available, this option automatically add entries in your oscam.srvid2 (or oscam.srvid) and in your oscam.provid files. You need to stay '''more than 30 seconds''' on a channel for the auto-detect to start. So both channel name and provider name are retrieved. If entries already exist they are not changed nor updated, so you keep full control on the content of both files, only missing entries are added.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = disabled (default)<br />
1 = on, do not save FTA channels<br />
2 = on, save FTA channels<br />
<br />
==== write_sdt_prov ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10841:06/27/15</span><br />
<br />
First enable the read_sdt parameter then you can specify if the provider name is saved or not into the oscam.srvid2 or oscam.srvid file. This is not mandatory since the provider name is now retrieved automatically from the oscam.provid file.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = off, do not write provider name into oscam.srvid/2 (default)<br />
1 = on, write provider name into oscam.srvid/2<br />
<br />
=== Anticasc ===<br />
Section is needed if anticascading will be used to protect against unauthorized forwarding CardSharing. <br />
{{OSCamConfAnticascParameter}}<br />
<br />
==== enabled ====<br />
{{required}}<br />
<br />
enabled anti-cascading:<br />
enabled = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== numusers ====<br />
{{Optional/en}}<br />
anti-cascading: user per account (number)<br />
numusers = 0 # anticascading disabled (default)<br />
= 1 # cascading for 1 user allowed ==> (1*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 11 ecms allowed per minute<br />
= 2 # cascading for 2 users allowed ==> (2*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 17 ecms allowed per minute <br><br />
<span style="color:Blue;padding:0;5px"><B>10</B></span> = number you have put in oscam.ac. Default value is 10<br />
<br />
==== sampletime ====<br />
{{Optional/en}}<br />
duration of sample in minutes:<br />
sampletime = 5 # duration 5 minutes<br />
= # [blank] duration 2 minutes (default)<br />
<br />
Ex: numusers = 1 ==> 11 ecms * 5 minutes ==> 55 ecms allowed in 5 minutes <br />
numusers = 2 ==> 17 ecms * 5 minutes ==> 85 ecms allowed in 5 minutes<br />
<br />
==== samples ====<br />
{{Optional/en}}<br />
<br />
number of additionnal ecms allowed (possible values between 2 and 10)<br />
samples = 7 # 7 additional ecms allowed<br />
= # [blank] 10 additional ecms allowed (default)<br />
<br />
==== penalty ====<br />
{{Optional/en}}<br />
Level of the penalty if the user exceeds the result shown in Ex on Sampletime<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay ([[OSCam/en/Config/oscam.conf#fakedelay|fakedelay]])<br />
<br />
penalty can be overwritten per user in oscam.user<br />
<br />
==== aclogfile ====<br />
{{Optional/en}}<br />
file for anti-cascading logging<br />
aclogfile =<br />
= # [blank] no logfile (default)<br />
<br />
==== fakedelay ====<br />
{{Optional/en}}<br />
<br />
fake delay time in milli seconds (possible values between 100 and 3000)<br />
fakedelay = 500 # delay 500 milli seconds<br />
= # [blank] 1000 milli seconds (default)<br />
<br />
==== denysamples ====<br />
{{Optional/en}}<br />
<br />
How many samples should be penalized?<br />
denysamples = 10 # 10 samples will be penalized<br />
= # [blank] 8 Samples will penalized (default)<br />
<br/><br />
<br />
==== acosc_enabled ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br/><br />
acosc_enabled = 0|1<br />
1 = enable anticascading oder SIDs count<br />
0 = default<br />
<br/><br />
==== acosc_max_active_sids ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = count<br />
<br />
maximum activ SIDs with anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br />
<br/><br />
<br />
==== acosc_zap_limit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = count<br />
<br />
zap limit for anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
level of penalty with anticascading over SIDs count:<br />
<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = seconds<br />
<br />
penalty duration for anticascading over SIDs count:<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
==== acosc_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_delay = milliseconds<br />
<br />
delay for anticascading over SIDs count<br />
<br />
0 = unlimites (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
<br />
<br />
<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.conf&diff=13531
OSCam/en/Config/oscam.conf
2020-02-24T17:29:35Z
<p>Felixka: /* ccc_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
==oscam.conf==<br />
<br />
=== The [global] section ===<br />
<br />
The main configuration file for OSCam contains global parameters such as debugging, logging, monitor, protocols and anti-cascading. Sections in oscam.conf are nonrecurring. The [global] section is required. All other sections are optional.<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If a parameter is empty or is not listed in config-file, then apply the default values !<br />
<br />
==== nice ====<br />
{{Optional/en}}<br />
<br />
'''Systempriority'''<br />
<br />
OSCam requires almost no CPU-power. But if CPU-power is required, it should be available immediatly. Values between 20 and -20 are possible. 20 = low, -20 = very high. If this parameter is commented out (#), this function is not called. Important for example for dbox2[http://de.wikipedia.org/wiki/DBOX2], if the error messages "''relocation error:setpriority''". See [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Example:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
===== initial_debuglevel =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10705:06/11/15</span><br />
<br />
Set the debuglevel on startup.<br />
<br />
Example:<br />
initial_debuglevel = 8<br />
<br />
Default:<br />
initial_debuglevel = 0<br />
<br />
===== pidfile =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8176/01/24/2013</span><br />
<br />
pidfile = set pidfile, [blank] none (default)<br />
<br />
Change PID file name an path. If default = oscam.pid in /tmp<br />
<br />
Example:<br />
pidfile = /var/run/oscam.pid<br />
<br />
===== logfile =====<br />
{{optional/en}}<br />
<br />
Logging target<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
You can define a maximum of one filename (not more!) and additionally to log to stdout or syslog (you can also only log to stdout or syslog and omit the filename).<br />
<br />
Opportunities:<br />
<br />
logfile = /var/log/oscam.log # file or linux device (for example /dev/tty)<br />
logfile = syslog # log to syslogd <br />
logfile = stdout # showing the log on the console<br />
<br />
Example:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format logfile:<br />
CAID&ident/provider/length:checksum<br />
<br />
===== ecmfmt =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
define ECM log format, default:c&p/i/s/l:h <br />
<br />
possible variables: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and CCcam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , this ID will be replaced with the tier-description from oscam.tiers (if found)<br />
w = CW<br />
y = payload (short, 3 bytes)<br />
Y = payload (long, 6 bytes)<br />
<br />
<br />
use a value as prefix to hide variable with this value, control characters will be escaped by "\" <br />
<br />
example:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w HOP:j<br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn10048:11/30/2014</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs will be dropped, if CWs do not have an odd an even sample (default)<br />
1 = disabled<br />
<br />
===== loghistorysize =====<br />
{{optional/en}}<br />
<br />
loghistorysize = bytes<br />
<br />
size of log message history in web interface or monitor<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) #stage 2 is used only if '''preferlocalcards = 1''' was activated in [global] section. <br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
example<br />
<br />
P/2/2/2 or L/2/4/4<br />
<br />
===== maxlogsize =====<br />
{{required}}<br />
<br />
Here the maximum size of logfiles are set in KBytes. This is especially important for server with only a small amount of memory (dbox2). Therefore it is strongly recomended to determine carefully that size at such servers. Not infrequently a system "bursting" because the logfile uncontrolled large scale adopted!<br />
<br />
Example<br />
maxlogsize = 20 # Logfile reaches to 20 KBytes<br />
= 0 # Logfile '''unlimited'''<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile reaches to 10 KBytes (default)<br />
<br />
===== logduplicatelines =====<br />
{{optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8290/02/05/2013</span><br />
<br />
logduplicatelines = 0|1<br />
<br />
1 = disable detection of duplicate lines in log file<br />
0 = enable detection of duplicate lines in logfile = default<br />
<br />
===== disablelog =====<br />
{{optional/en}}<br />
<br />
switches logfile '''off'''<br />
1 = '''no log''' <br />
0 = '''log''' <br />
<br />
Example:<br />
disablelog = 1 # '''no''' log <br />
<br />
Default:<br />
disablelog = 0 # '''log'''<br />
<br />
===== cwlogdir =====<br />
{{Optional/en}}<br />
<br />
<br />
A path for cw logging can be configured here. The path is relative to the work directory and must exist. Otherwise no logs are created and no errors are reported. <br />
<br />
CWs (control words) are the answers of the card which decrypts a certain channel for some seconds before the next cw is transmitted. The CW log file can be used for delayed decoding of this channel. This is also called offline decoding. Watch this [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
Oscam creates a new *.cwl file for each channel and each day. The file name contains the date, service ID and service name, e.g. 110808_I000B_Sky_Cinema_+1.cwl with this contents:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
All cws are logged if at least one user watches the channel. Please choose a path with enough space, since per day and channel some 10KB of data are created. A script that moves/deletes the log files regularly is recommended.<br />
<br />
Example:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] no path for cw-log, logging disabled<br />
<br />
===== emmlogdir =====<br />
{{Optional/en}}<br />
<br />
Setting a path for emm-log. You can define with the "saveemm-*"-Parameters in oscam.server which EMMs should be logged.<br />
<br />
Example:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] the config folder will be used for emm logging<br />
<br />
===== usrfile =====<br />
{{Optional/en}}<br />
<br />
Set a name für userfile<br />
<br />
Format of the userfile: <br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Example:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
===== disableuserfile =====<br />
{{Optional/en}}<br />
<br />
Now it is crazy: Even if a logfile is switched on (see logfile), the userfile can be turned off!<br />
<br />
Example:<br />
disableuserfile = 1 # '''no''' userfile <br />
= 0 # '''userfile'''<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
===== usrfileflag =====<br />
{{Optional/en}}<br />
<br />
Setting the logging-modus<br />
0 = Only login and logout will be logged<br />
1 = Each zapping from client will be logged<br />
Default is 0<br />
<br />
Example:<br />
usrfileflag = 1 # All will be logged<br />
<br />
Default:<br />
usrfileflag = 0 # Only login und logout will be logged<br />
<br />
===== saveinithistory =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn7128:07/02/2012</span><br />
<br />
Save SC init history to /tmp/.oscam/reader<number>. Needed to show entitlements.<br />
<br />
Example:<br />
saveinithistory = 1 # save to /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # no save<br />
<br />
===== mailfile =====<br />
{{Optional/en}}<br />
<br />
mailfile = file<br />
<br />
define file saving NDS Videogard mail messages from provider. Default: [blank] none<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
delay in millisencons for asking cache exchange mode 1 readers, default: none<br />
<br />
===== disablemail =====<br />
{{Optional/en}}<br />
<br />
disablemail = 0|1<br />
<br />
disable saving NDS Videogard mail messages form provider. Default = 1 (disabled)<br />
<br />
===== sysloghost =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set remote syslog server will be activated. Messages will be sent to this IPv4 address. If not set remote syslog server not work.<br />
<br />
Example:<br />
sysloghost = 192.168.1.167<br />
<br />
===== syslogport =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set ''sysloghost'' remote syslog server will be activated. Messages will be sent to this port. If not set port 514 is used as default. <br />
<br />
Example:<br />
syslogport = 515<br />
<br />
Default:<br />
syslogport = 514<br />
<br />
==== Reader ====<br />
<br />
===== enableled =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
===== serialreadertimeout =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8541:03/13/2013</span><br />
<br />
'''Only using Serialreader!'''<br />
<br />
timeout for serial reader in milli-seconds<br />
<br />
Example:<br />
serialreadertimeout = 1200 # Timeout after 1200 milli-seconds<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout after 1500 milli-seconds<br />
<br />
===== waitforcards =====<br />
{{Optional/en}}<br />
<br />
wait for local SCs on startup before opening network ports<br />
<br />
Example:<br />
waitforcards = 0 # don't wait<br />
<br />
Default:<br />
waitforcards = 1 # wait<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional/en}}<br />
<br />
waitforcards_extra_delay = milli seconds<br />
<br />
additional delay in milli seconds after waiting for local SCs on startup before opening nework ports<br />
<br />
default = 500<br />
<br />
===== preferlocalcards =====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn9605:03/29/2014</span><br />
<br />
try decoding on local cards first<br />
<br />
Example:<br />
preferlocalcards = 0 # local cards are used like remote reader<br />
preferlocalcards = 1 # prefer CacheEx sources <br />
preferlocalcards = 2 # prefer local cards<br />
<br />
Default:<br />
preferlocalcards = 1 # prefer CacheEx sources<br />
<br />
===== readerrestartseconds =====<br />
{{Optional/en}}<br />
<br />
waiting time in seconds beetween restarts<br />
<br />
Example:<br />
readerrestartseconds = 10 # waiting time 10 seconds<br />
= 0 # '''no restarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # waiting time 5 seconds<br />
<br />
===== block_same_ip =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_ip = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same ip address, default = 1<br />
0 = no reject<br />
<br />
===== block_same_name =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_name = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same name, default = 1<br />
0 = no reject<br />
<br />
==== Cache ====<br />
<br />
===== cachedelay =====<br />
{{optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
===== max_cache_time =====<br />
<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
===== max_cache_count =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = count, default 1000<br />
<br />
maximum CWs in cache<br />
<br />
===== cacheexwaittime =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
maximum wait time for a cache entry in milli seconds, default:50 <br />
<br />
===== cacheexenablestats =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== Client ====<br />
<br />
===== clienttimeout =====<br />
{{Optional/en}}<br />
<br />
value in milli-seconds for client process to wait for key<br />
<br />
Examples:<br />
clienttimeout = 10000 # after 10 seconds timeout<br />
clienttimeout = 10 # timeout after 10 milli-seconds! (see Tip below)<br />
clienttimeout = 8 # timeout after 8000 milli-seconds (= 8 seconds), see Tip below<br />
Default:<br />
clienttimeout = 5000 # timeout after 5000 milli-seconds (=5 seconds)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Values < 10 (so 1 to 9) are multiplicated with 1000, so a "5" results in 5000 ms.<br />
<br />
===== clientmaxidle =====<br />
{{Optional/en}}<br />
<br />
value for client process being idle before disconnect in seconds<br />
<br />
Example:<br />
clientmaxidle = 200 # Disconnect after 200 seconds<br />
= 0 # idle disconnect disabled<br />
<br />
Default:<br />
clientmaxidle = 120 # Disconnect after 120 seconds<br />
<br />
===== suppresscmd08 =====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35[cs3.57x]-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
==== fallbacktimeout ====<br />
{{Depends/en}}<br />
<br />
At several readers (see Chapter [reader] in oscam.server) one reader can be defined to them, for example in case of failure of the other readers, the traffic falls back.<br />
Maximum waiting time of the [[Cardserver]]s in milliseconds for primary [[Reader]], before [[Fallback]]-Reader (if any!) are questioned.<br />
<br />
Example:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The value must be greater than the value in "serialreadertimeout", otherwise the default is used.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = milliseconds <br />
<br />
time falling back to CAID restricted fallback reader, default: 2500<br />
<br />
<br />
<br />
==== sleep ====<br />
{{Optional/en}}<br />
<br />
time waiting for inactive users in minues, can be overwritten per user in oscam.user<br />
<br />
Example:<br />
sleep = 5 # waiting time 5 minutes<br />
<br />
Default:<br />
sleep = # [blank] no waiting time<br />
<br />
==== serverip ====<br />
{{optional/en}}<br />
<br />
Bind service to specified IP-address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam listen to all IP's<br />
<br />
==== bindwait ====<br />
{{Optional/en}}<br />
<br />
value in seconds to wait for bind request to complete. If OSCam within this time can not bind, he finished with "Bind Request failed".<br />
<br />
Causes may include:<br />
* Double assignment of ports<br />
* "crashed" OSCam has not released the ports again<br />
* OSCam was started serveral times while<br />
<br />
Example:<br />
bindwait = 20 # waiting time 20 seconds<br />
<br />
Default:<br />
bindwait = 120 # waiting time 120 seconds<br />
<br />
==== netprio ====<br />
{{Optional/en}}<br />
<br />
network priority - This sets the value of SO_PRIORITY on network connections. Basically this leads to setting the TOS fields of the sent IP packages so that QoS can be better used.<br />
<br />
Beispiel:<br />
netprio = 1 # Priority 1<br />
<br />
Default:<br />
netprio = 0 # system given<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional/en}}<br />
<br />
set mode for DNS resolving: These are different libc calls to resolve dns names and some older systems have problems with the newer implementation ''getadressinfo'' (getadressinfo is also threadsafe whereas ''gethostbyname'' is not and thus it has some locks around) or have stripped them from their images (dbox2 was such a candidate I think) even though it is available at compile time. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Example:<br />
resolvegethostbyname = 1 # gethostbyname<br />
<br />
Default:<br />
resolvegethostbyname = 0 # adressinfo system given<br />
<br />
==== failbantime ====<br />
{{Optional/en}}<br />
<br />
time for IP based blocking for clients with an invalid login attempt in minutes<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP will be blocked for 5 minutes. New logins are denied.<br />
# no clientthread will be created.<br />
<br />
Default:<br />
failbantime = 0 # failban off (default)<br />
<br />
==== failbancount ====<br />
{{Optional/en}}<br />
<br />
Failbancount = Number of allowed failed attempts with incorrect data <br />
= 0 (default) IP is now blocked on the first try with incorrect data!<br />
<br />
If within '''failbantime''' more than in '''failbancount''' allowed trials to be registered, the IP for the remainder failbantime is locked. After a period of failbantime are again full failbancount available. Failbancount is thus a relaxation of rules!<br />
<br />
==== dropdups ====<br />
{{Optional/en}}<br />
<br />
mode for duplicate client connections<br />
<br />
0 = mark client as duplicate, but don't disconnect them (default)<br />
1 = drop duplicate connections instead of marking as duplicate<br />
<br />
==== unlockparental ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7289:08/27/2012</span><br />
<br />
'''Only Seca and Viaccess'''<br />
<br />
unlock parental mode option to disable pin code request for adult movie.<br />
In order to work properly, this option may required that you define the card PIN code in your card reader configuration.<br />
<br />
Example:<br />
unlockparental = 1 # parental lock mode disabled<br />
<br />
Default:<br />
unlockparental = 0 # parental lock mode enabled<br />
<br />
==== double_check ====<br />
{{Optional/en}}<br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other, lb_nbest_readers must be set to 2 or higher<br />
<br />
Example:<br />
double_check = 1 # on<br />
<br />
Default:<br />
double_check = 0 # off<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|first two digits of CAID1],[CAID2|first two digits of CAID2]... <br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other for defined CAID or first two bytes of CAID, lb_nbest_readers must be set to 2 or higher, default:none <br />
<br />
<br />
<br />
==== Loadbalancer ====<br />
<br />
===== lb_mode =====<br />
{{Optional/en}}<br />
<br />
'''loadbalance mode'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If load balancing is activated here, it may in oscam.server among services and ident are '''no entries'''!<br />
<br />
If there are 2 or more of the same SC, the load can be distributed evenly on the cards. For more see [[OSCam/en/Loadbalancing|Loadbalancing]]<br />
<br />
Example:<br />
lb_mode = 0 loadbalance disabled, ECMs go to all readers<br />
lb_mode = 1 fastest reader first, after 5 ECMs the reader with the fastest response time will be selected<br />
lb_mode = 2 oldest reader first, reader with the longest no answer<br />
lb_mode = 3 lowest usage level, the usage level will be calculated by the sum of 5 ECMS response times, the higher a reader is busy, the higher is usage level<br />
lb_mode = 10 LB is switched off, but statistics are build<br />
<br />
<br />
Default:<br />
lb_mode = 0 # disabled<br />
<br />
===== lb_save =====<br />
{{Optional/en}}<br />
<br />
Save autoloadbalance statistics (counts). To save CPU power a minimum counts of 100 is recommended.<br />
<br />
Example:<br />
lb_save = 100 # counts of ECM's after statistics are saved<br />
<br />
Default:<br />
lb_save = 0 # no svae<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional/en}}<br />
<br />
set count of best readers for loadbalancing.<br />
<br />
Example:<br />
lb_nbest_readers = 2 # requests always go to two reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # requests go to one reader<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional/en}}<br />
<br />
set count of fallback readers for loadbalancing<br />
<br />
Example:<br />
lb_nfb_readers = 2 # two fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1 # one fallbackreader<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mode:<br />
= 0 # standard late reopening of blocker readers (default)<br />
= 1 # fast reopening of blocker readers<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5893:08/19/2011</span><br />
<br />
Set count of best readers per CAIDs for loadbalancing, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
<br />
lb_nbest_percaid = # number<br />
= [blank] # none (default)<br />
<br />
example: <br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wiil be blocked until statistics has been cleaned<br />
1 = default<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = force reopening immidiatly all failing readers if no matching was found<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional/en}}<br />
<br />
minimal ECM count to evaluate loadbalancing values<br />
<br />
Example:<br />
lb_min_ecmcount = 2 # 2 counts<br />
<br />
Default:<br />
lb_min_ecmcount = 5 # 5 counts<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional/en}}<br />
<br />
Maximum ECM count before resetting loadbalancing values.<br />
<br />
Example:<br />
lb_max_ecmcount = 200 # 200 counts<br />
<br />
Default:<br />
lb_max_ecmcount = 500 # 500 counts<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional/en}}<br />
<br />
time in seconds between retrying failed readers/CAIDs/providers/services<br />
<br />
Example:<br />
lb_reopen_seconds = 500 # retry after 500 seconds<br />
<br />
Default:<br />
lb_reopen_seconds = 900 # retry after 900 seconds<br />
<br />
===== lb_retrylimit =====<br />
{{Optional/en}}<br />
<br />
Retry next readers '''only''' if response time is higher then lb_retrylimit in '''milli seconds'''.<br />
<br />
Example:<br />
lb_retrylimit = 500 # retry next reader only, if response time is higher than 500 ms<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
===== lb_savepath ===== <br />
{{Optional/en}}<br />
<br />
Filenanme for saving loadbalancing statistics<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional/en}}<br />
<br />
hours after the loadbalancing statistics will be deleted<br />
<br />
default = 336<br />
<br />
===== lb_use_locking =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6166:12/28/2011</span><br />
<br />
disable parallel and identical ECM requests<br />
<br />
<br />
1 = on<br />
0 = off # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* You should choose this option only if:<br />
** slow system<br />
** high load<br />
** the same ECM requests come not from the cache, but will continue to the confirmed reader.<br />
<br />
* Adventages, if activated:<br />
** By synchronizing, an ECM request made by one. The identification of cache or request and assignment of the reader by loadbalancer is always successful.<br />
<br />
* Disadventages, if activated:<br />
** The synchronisation prevents multithreading and the probability of higher response times.<br />
<br />
* Adventages, if NOT activated:<br />
** Faster transit times for ECM requests<br />
<br />
* Disadventages, if NOT activated:<br />
** May have dual (n-fold) possible requests to the readers.<br />
<br/><br />
<br />
===== lb_retrylimits =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn:5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,Caid2:time2]...<br />
<br />
loadbalancing retry limit time per CAID in milliseconds, wilcard CAIDs with 2-digit Caids possible<br />
<br />
default = none<br />
<br />
example: <br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
ignore provider information CAIDs to reduce statistic date, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
example: <br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
default = none<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # enable automatic timeout based on load balancing statistics<br />
= 0 # default<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = percent<br />
<br />
percent added to average time as timeout time<br />
default = 30<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = milli seconds<br />
<br />
minimal time added to average time as timeout time<br />
default = 300<br />
<br />
===== lb_max_readers =====<br />
{{Optional/en}}<br />
<br />
lb_max_readers = limit (number)<br />
<br />
restrict the reader count to limit during learning<br />
<br />
0 = unlimited (default)<br />
x = restrict loadbalancer readers to limit x (number)<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional/en}}<br />
<br />
lb_auto_betatunnel = 0|1<br />
<br />
enable automatic Betacrypt tunneling for CAIDs 1801, 1833, 1834 and 1835 in loadbalancing mode<br />
lb_auto_betatunnel = 0 # disabled<br />
= 1 # enabled (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Betacrypt definition in oscam.user with betatunnel will be prefered [[streamboard:wiki/OSCam/en/Config/oscam.user#betatunnel|User-Betatunnel]]!<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
set mode for automatic Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only) <br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = number<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = always Betacrypt<br />
105 = represents the middle<br />
200 = always Nagravision<br />
<br />
=== Monitor ===<br />
'''Only if monitor is used!'''<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
==== port ====<br />
{{Optional/en}}<br />
UDP port for monitor<br />
port = 0 # monitor disabled<br />
= # port number<br />
<br />
Beispiel:<br />
port = 24480 # monitor on, port = 24480<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
serverip = # IP adress<br />
= # [blank] all IP's (default)<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured monitor connection<br />
[,IP address|IP address range]...<br />
<br />
Possible<br />
* one or more IP adresses<br />
* one or more IP adress ranges<br />
* mixture of IP adresses and IP adress ranges<br />
<br />
Example<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 and IP range 192.168.0.0 to 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] no secured monitor connection<br />
<br />
==== aulow ====<br />
{{Optional/en}}<br />
<br />
time no EMM occurs so that client is set to low in minutes<br />
<br />
Example<br />
aulow = 30 # After 30 minutes whithout EMM client will be switched from "active" to "on" (default).<br />
<br />
==== monlevel ====<br />
{{Optional/en}}<br />
<br />
monitor-level<br />
0 = no access to monitor (default)<br />
1 = only server and own procs<br />
2 = all procs, but viewing only<br />
3 = all procs, reload of oscam.user possible<br />
4 = complete access<br />
<br />
Example<br />
monlevel = 4 # complete access<br />
<br />
monlevel can be overwritten per user in oscam.user!<br />
<br />
==== appendchaninfo ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8546:03/13/2013<br />
</span><br />
<br />
Append channel name on log messages. Very useful when using [webif]!<br />
appendchaninfo = 1 # append chanel name<br />
= 0 # no append chanel name (default)<br />
<br />
=== lcd ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
==== lcd_outputpath ====<br />
{{Optional/en}}<br />
<br />
Path for LCD output<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
==== lcd_hideidle ====<br />
{{Optional/en}}<br />
<br />
hide reader in LCD output if reader idle > 20 seconds, default:0 <br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional/en}}<br />
<br />
LCD refresh interval (minimum 5), default:10<br />
<br />
=== WebIf ===<br />
'''Only if WebIf is used!'''<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
==== File format to send EMMs via the webinterface ====<br />
(by Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention'''<br />
<br />
* File has to be in TXT format.<br />
* The EMM-file should contain each PRE-CAM EMM in a new line.<br />
* EMMs should be in HEX representation.<br />
** Example: AABBCCDD...<br />
*Spaces and tabs between the bytes are allowed:<br />
**AA BB CC DD...<br />
*The HEX representation of each EMM's byte can be represented by upper or lower case - even mixed is allowed:<br />
**AA aa Aa aA...<br />
*Other chars and comments are not allowed.<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
<br />
default is 8888 if no httpport is set<br />
port for web interface,<br />
0 = disabled, praefix + = enable SSL<br />
<br />
Example<br />
httpport = 83 # Webinterface listening on '''http-port 83'''<br />
= +83 # Webinterface listening on '''https-port 83''' (SSL)<br />
0 # Webinterface disabled<br />
<br />
==== httpcert ====<br />
{{Optional/en}}<br />
<br />
file for http SSL certificate<br />
httpcert = oscam.cert # (look there)<br />
= # [blank] file oscam.pem (embedded) is used<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
example<br />
httpforcesslv3 = 0 none (default)<br />
= 1 force using SSLV3<br />
<br />
==== httpuser ====<br />
{{Optional/en}}<br />
<br />
Username for password protection. [blank] is default, of which is strongly discouraged! <br />
httpuser = # xyxyxy (all characters and figures are allowed)<br />
<br />
==== httppwd ====<br />
{{Optional/en}}<br />
<br />
Password for password protection. It is the same as for httpuser.<br />
httppwd = # 123456<br />
<br />
'''The ''user'' and ''pwd'' parameters are queried when connecting to the webinterface in a messagebox. If they are missing ore corrupted a message ''Forbidden'' appears and the connection is aborted!'''<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6625:05/15/2012</span><br />
<br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Do not add the content of the embedded CSS before the content of the custom CSS (default)<br />
1 # embedded CSS will be added before external custom CSS (specified by the [[#httpcss|httpcss]] parameter)<br />
<br />
This parameter can be used to override the embedded CSS with custom styles. To see the current CSS styles use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
==== httpcss ====<br />
{{Optional/en}}<br />
<br />
path for external CSS file<br />
<br />
For webinterface different styles are available. Put custom CSS files (ending with .css extension) in the oscam config directory to managed your custom styles with WebIf.<br />
<br />
Example<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] embedded style is used (default)<br />
<br />
To see the current CSS style, use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
Styles you find here: [[Streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
==== httptpl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7083:06/25/2012</span><br />
<br />
path for external templates and picons<br />
httptpl =<br />
= # [blank] No external templates<br />
<br />
path for external templates and picons, multiple simultaneously templates and picons are possible by creat‐ <br />
ing sub folders (maximum length of 32 alphanumeric characters), sub folders naming is corresponding to sub <br />
folder in URL, default:none <br />
<br />
example <br />
httptpl = /this/is/my/path <br />
<br />
folder with multiple templates: <br />
/this/is/my/path/template<br />
/this/is/my/path/template2 <br />
<br />
valid URLs: <br />
http://host:port/template1 <br />
http://host:port/template2<br />
<br/><br />
<br/><br />
==== httpoverwritebakfile ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = overwrite backup configurations files (*.bak)<br />
0 = default<br />
<br/><br />
<br/><br />
<br />
<br />
<br />
==== httplocale ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
set the "locale environment"<br />
<br />
default = blank [none]<br />
<br />
look here::<br />
<br />
http://en.wikipedia.org/wiki/locale<br />
<br />
==== httpjscript ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
path for oscam.js javascript, def: none<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional/en}}<br />
<br />
status refresh in seconds<br />
<br />
httprefresh = 7 # status will be refreshed after 7 seconds<br />
= # [blank] no refreshing<br />
<br />
==== httppollrefresh ====<br />
{{Optional/en}}<br />
<br />
refreshtime for polling in seconds<br />
<br />
httppollrefresh = 60 # polling will be refreshed after 60 seconds<br />
= # [blank|0] no refreshing poll<br />
<br />
==== httpshowpicons ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # show picons in userlist<br />
0 # default<br />
<br />
If this parameter is enables, then a new column is added to the USERS tab which display the picons of the last watched channels by active users. The folder where the picons must be configured in the httppiconpath.<br />
<br />
Possible format are:<br />
IC_caid_srvid.tpl<br />
IC_caid_provid_srvid.tpl<br />
IC_servicename.tpl<br />
<br />
added support for picons by channel name<br /><br />
syntax is:<br /><br />
take service-name from oscam.srvid,<br /><br />
replace all upper-case letters with lower case,<br /><br />
replace * with star,<br /><br />
replace & with and,<br /><br />
replace + with plus,<br /><br />
remove everything but a-z and 0-9,<br /><br />
if the result is name, the picon file will be IC_name.tpl<br /><br />
for example:<br /><br />
service-name "BBC-ONE +HD"<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
if service-name ends with hd, and picon is not found, fallback to name without hd, example:<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
-> not found, search for:<br /><br />
picon file: "IC_bbconeplus.tpl"<br /><br />
<br />
==== httphideidleclients ====<br />
{{Optional/en}}<br />
<br />
Enables hiding clients after idle time set with parameter ''' hideclient_to''' in section [monitor].<br />
httphideidleclients = 1 # hide<br />
= 0 # hide not (default)<br />
<br />
==== hideclient_to ====<br />
{{Optional/en}}<br />
<br />
Time to hide clients in the monitor if not sending requests. See also parameter '''httphideidleclienst''' in section [webif].<br />
hideclient_to = 1 # hide clients<br />
= 0 # no hide<br />
<br />
==== httphidetype ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
type = letter which defines types to hide in web interface status page (see Typ column), <br />
default: none. s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
==== httpscript ====<br />
{{Optional/en}}<br />
<br />
Path to an executable script which you wish to start from web interface<br />
httpscript = # path<br />
= # [blank] no path<br />
<br />
You can run script file from script.html (SCRIPTS item in main menu)<br /><br />
If the script file contains the "echo" will be it displayed in a Web interface.<br />
<br />
If the file can not run displays<br />
[Error]: Script "name_of_script.sh" not executable!<br />
<br />
If does not exist script displays<br />
[Error]: Script "name_of_script.sh" not found!<br />
(Works If you delete the script and refresh page)<br />
<br />
==== httpallowed ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8842:08/17/2013</span><br />
<br />
http web interface connections allowed. [blank] is allowed (default), but that makes no sense! If the webinterface to be used, then there must be a way to connect with him. Therefore we declare this parameter as '''mandatory'''!<br />
<br />
With '''::1''' OSCam decides to resolve 'localhost' to '''IPv6'''!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
<br />
<br />
Example<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host and range 192.168.0 are allowed<br />
resolving to IPv6<br />
<br />
'''default values'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1<br />
<br />
==== httpdyndns ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6558:03/21/12</span><br />
<br />
http web interface connections allowed<br />
<br />
httpdyndns = hostname [,hostnahme][,hostname]<br />
<br />
Example<br />
httpdyndns = host1.example.com,host2.example.com<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional/en}}<br />
<br />
write config:<br />
0 = all not empty parameters, all not default parameters, all parameters not containing the same value as the same parameter in global configuration (default)<br />
1 = all parameters<br />
<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional/en}}<br />
<br />
read only modus for web interface<br />
<br />
httpreadonly = 1 # only read<br />
= 0 # all is possible (default)<br />
<br />
<br />
==== httppiconpath ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9463/01/28/2014</span><br />
<br />
httppiconpath = path<br />
<br />
path to picons, default [blank] none<br />
<br />
====httphelplang====<br />
{{required}}<br />
<br />
set right language for wiki entry point<br />
de|en|fr <available wiki languages><br />
<br />
==== httposcamlabel ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
set individual label in web interface header, default: OSCam<br />
<br />
==== http_status_log ====<br />
{{Optional/en}}<br />
<br />
http_status_log = 0|1<br />
1 = display log in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowreaderinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowreaderinfo = 0|1<br />
1 = display readers informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowecminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowecminfo = 0|1<br />
1 = display readers and users ECM informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowuserinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowuserinfo = 0|1<br />
1 = display users informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowcacheexinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowcacheexinfo = 0|1<br />
1 = display CacheEX informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowmeminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowmeminfo = 0|1<br />
1 = display memory usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowloadinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowloadinfo = 0|1<br />
1 = display load average and CPU usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
<br/><br />
<br/><br />
<br />
=== [cache] ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW since svn 8358:02/16/2013</span><br />
<br />
{{OSCamConfCacheParameter}}<br />
<br />
<br />
==== delay ====<br />
{{optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
==== max_time ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
==== max_hit_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8910:09/10/2013</span><br />
<br />
max_hit_time = in seconds<br />
<br />
maximum time for cache exchange hits resists in cach for evaluating wait_time, default: 15<br />
<br />
<br />
<br />
==== wait_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 8077:01/06/2013</span><br />
<br />
wait_time = milli-seconds<br />
= [blank] none (default)<br />
<br />
wait time for cache exchange (mode 2 & 3 only!)and Cardserverproxy before sending ECM to reader or proxy<br />
<br />
Example:<br />
0:50:250,0200@00009X:50:150:950,0500@000001:150:1602&ffdf:1200<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional/en}}<br />
<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode:<br />
specify behaviour for counter parameter<br />
<br />
0 = when wait_time expires, serve highest counter's cw got anyway, even if no counter reached.<br />
1 = never serve cw (coming from cacheex) stored in cache if its counter not reaches counter. When wait_time expires, requests<br />
will go to normal readers! Only when a cw reaches counter, it can be served to clients.<br />
<br />
Default = 0<br />
<br />
<br />
* counter:<br />
set minimum cw counter to allow cw is used.<br />
<br />
Default = 1 (use default behaviour: use cw with highest counter when cache is checked)<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = allow bad cycles from a fixed fallback reader. Default = 0<br />
<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== csp_port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
This is a UDP ('''not TCP''') listen port for incoming traffic from csp nodes<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
==== csp_serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
This is the local bind IP of csp_port (see above!)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 disable (default)<br />
= 1 enable<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: not for all NDS SC's!'''<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID enabled for CW cycle check, default: none<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = count<br />
<br />
maximum CW cycle list entries, default = 500, maximum = 4000<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = minutes<br />
<br />
minimum time a learned cycletime resists in memory, default = 0, maximum = 15<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = log bad CW cycle only <br />
1 = drop bad CW cycle (default)<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, <br />
1 = drop old CW cycle, <br />
0 = no drop(default)<br />
<br/><br />
==== cwcycle_sensitive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (or more) same bytes and drop new CW<br />
3 = 3 (or more) same bytes and drop new CW<br />
4 = 4 (or more) same bytes and drop new CW<br />
<br />
<br/><br />
==== cwcycle_usecwcfromce ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = use CW Info from cache exchange<br />
0 = default<br />
<br/><br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
answer when cache exchange timeount expires, if no normal readers are vavailable for sending ECM's::<br />
<br />
0 = immediatly send '''not found''' to client (default)<br />
1 = wait for cache exchange answer until client timeout expires<br />
<br />
<br/><br />
<br/><br />
<br />
<br/><br />
<br />
=== csp (UDP) ===<br />
Section only needed if using cache exchange<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:02/16/2013 look at '''[cache]'''!</span><br />
<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6124:12/23/2011</span><br />
<br />
UDP listen port for incoming traffic from csp nodes<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
==== serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6124:12/23/2011</span><br />
<br />
Local bind IP of the above udp port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
=== Camd 33 (TCP) ===<br />
Section required only if camd33 will be used as client protocol!<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for camd 3.3x clients, 0 = disabled, default:0<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # listenig to all<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured camd 3.3x client connection<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
Example:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt = [none]<br />
<br />
==== passive ====<br />
{{Optional/en}}<br />
<br />
force passive camd 3.3x client<br />
<br />
Camd3.3x protocol generally has aktive clients. In certain circumstances the client must switched on only "passive" mode.<br />
<br />
Example:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
==== key ====<br />
{{Optional/en}}<br />
128 bit key<br />
<br />
key for camd 3.3x client encryption<br />
<br />
<br />
Example:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key = # (blank] none (default)<br />
<br />
=== cs357x (UDP) ===<br />
Section required only if cs357x will be used as client protocol! These protocols principle encrypt and build the key from user name.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''cs357x''' was also known as '''camd35''' designated. Both terms mean the same protocol with the same functions and parameters. In the future, to avoid confusion '''only cs357x''' is used.<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
UDP port for camd 3.5x|cs357x clients. Port must be opened at router!<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35|cs3.57x-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== cs378x (TCP) ===<br />
Section required only if cs378x (camd 3.5x in TCP) will be used as client protocol!<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
Port(s) TCP for Cs378x clients (camd 3.5x in TCP mode). Port(s) must be opened at router!<br />
<br />
port@CAID[:ident][,ident]...[;port@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@0500:030B00;22764@0648<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell cs3.78x clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disable<br />
<br />
<br />
Mor here: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== Newcamd (TCP) ===<br />
Section required only if newcamd will be used as client protocol!<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
==== key ====<br />
{{required}}<br />
DES key<br />
Default key for newcamd client encryption.<br />
<br />
Example:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
==== port ====<br />
{{required}}<br />
TCP port/DES key/CAID/ident definitions. Each CAID requires a separate port. If you don't specify a DES key for a port, the default DES Key will be used!<br />
<br />
port[{DES key}]@CAID[:ident][,ident]...[;port[{DES key}]@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@1234:000000 # (CAID 1234 connected with port 15000)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 connected with port 15000. CAID 5678 with port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = [blank]<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
!! Dyn DNS Addresses are not forseen here and won't work !!<br />
<br />
Example:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed = [blank]<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<br />
Example:<br />
keepalive = 1 # (enabled)<br />
keepalive = 0 # (disabled)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
==== mgclient ====<br />
{{Optional/en}}<br />
<br />
Enable mgcamd extended newcamd protocol, allowing for a single connection to work with mutliple providers, default:0<br />
<br />
Example:<br />
mgclient = 1 # (enabled)<br />
mgclient = 0 # (disabled)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br/><br />
<br/><br />
=== '''scam''' ===<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9878:09/29/2014</span><br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port = port<br />
<br />
UDP port for scam server, default = 0<br />
<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br/><br />
<br/><br />
<br />
=== Radegast ===<br />
Section required only if radegast will be used as client protocol!<br />
<br />
{{OSCamConfRadegastParameter}}<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for radegast clients (enables radegast)<br />
port =<br />
= 0 (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br />
==== user ====<br />
{{required}}<br />
<br />
user name for radegast client<br />
user = username<br />
<br />
=== Serial ===<br />
Section required only if seral interface will be used!<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
==== device ====<br />
{{Optional/en}}<br />
<br />
Parameter of device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = name of Serial Device<br />
option = timeout = milli seconds timeout for connection default: 50<br />
= delay milli seconds additive between 2 characters<br />
<br />
supported serial devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
=== Cccam (TCP) ===<br />
Section required only if Cccam will be used as client protocol!<br />
{{OSCamConfCccamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6206:01/07/2012</span><br />
<br />
Port = 0|port[,port...]<br />
<br />
TCP/IP-Ports for CCcam clients, enables Cccam protocol!<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled (default)<br />
<br />
==== version ====<br />
{{Optional/en}}<br />
<br />
<br />
define CCcam version, minimum CCcam version 2.0.11, used with original CCcam only, default:none<br />
<br />
<nowiki><main version>,<version>,<sub version></nowiki><br />
<br />
Example:<br />
version = 2.0.11<br />
<br />
==== reshare ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
reshare level for CCcam clients:<br />
-1 = no resharing<br />
0 = resharing for direct peer only<br />
1 = resharing for direct peer and next level<br />
x = resharing for direct peer and next x level (x for number of level)<br />
10 = (default)<br />
<br />
Example:<br />
reshare = 1 resharing only for direct peer and next level<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
==== reshare_mode ====<br />
{{Optional/en}}<br />
<br />
CCcam reshare mode<br />
0 = reader reshares only received SCs for CCcam readers,<br />
defined filters/CAIDs/idents on other readers (default)<br />
1 = reader reshares received SCs (like=0) and defined services<br />
2 = reader reshares only defined reader services as virtual SCs<br />
3 = reader reshares only defined user services as virtual SCs<br />
4 = reader reshares only received cards<br />
<br />
Every server is shared as hop=0 and with defined reshare values.<br />
<br />
Service reshare only works if positive services defined: no service - no reshare!<br />
<br />
==== ignorereshare ====<br />
{{Optional/en}}<br />
<br />
<br />
CCcam reshare setting:<br />
0 = use reshare setting of server (default)<br />
1 = use reshare setting of reader or user<br />
<br />
Example:<br />
ignorereshare = 1 reshare settings of reader or user are used<br />
<br />
==== stealth ====<br />
{{Optional/en}}<br />
<br />
Behaviour like the original CCcam: no activate partner detection and extended OSCam-CCcam protocol, prevent other OSCam to detect the server as OSCam server.<br />
<br />
stealth = 1 # stealth enabled<br />
= 0 # stealth disabled (default)<br />
<br />
==== minimizecards ====<br />
{{Optional/en}}<br />
<br />
mode how to provide CCcam servers to CCcam clients:<br />
0 = no aggregation, remove duplicates only (default)<br />
1 = based on minimum hop: two SCs with different hops are summarized, new SCs get a smaller hop<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional/en}}<br />
<br />
<br />
interval to provide share list update to CCcam clients in seconds<br />
0 = update based on server updates, values <= 10 are invalid and will be set to 30 <br />
= [blank] 240 (default)<br />
<br />
==== keepconnected ====<br />
{{Optional/en}}<br />
<br />
set CCcam keepalive modus:<br />
0 = disconnect client when max idle time is reached<br />
1 = keep client connected (default)<br />
<br />
==== recv_timeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7672:10/09/2012</span><br />
<br />
recv_timeout = milli-seconds<br />
<br />
set network timeout for receiving data<br />
default = 2000<br />
<br />
==== forward_origin_card ====<br />
{{Optional/en}}<br />
<br />
forward_origin_card = 0|1<br />
<br />
1 = forward ECM request to reader holding this card, loadbalancer, fallback and caching will be disabled <br />
0 = default<br />
<br />
==== nodeid ====<br />
{{Optional/en}}<br />
<br />
nodeid = ID<br />
<br />
set CCcam node ID in hex, default:none<br />
<br />
example<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br/><br />
=== Pandora ===<br />
{{OSCamConfPandoraParameter}}<br />
<br />
==== pand_skip_send_dw ====<br />
<br />
<br />
pand_skip_send_dw = dummy<br />
<br />
<br />
==== pand_allowed ====<br />
<br />
<br />
pand_aloowed = dummy<br />
<br />
<br />
==== pand_usr ====<br />
<br />
<br />
pand_user = dummy<br />
<br />
<br />
==== pand_pass ====<br />
<br />
<br />
pand_pass = dummy<br />
<br />
<br />
==== pand_ecm ====<br />
<br />
<br />
pand_ecm = dummy<br />
<br />
<br />
==== pand_port ====<br />
<br />
<br />
pand_port = dummy<br />
<br />
<br />
==== pand_srvid ====<br />
<br />
pand_srvid = dummy<br />
<br />
<br/><br />
<br/><br />
<br />
=== GBox ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
{{OScamConfGboxParameter}}<br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 {3 3}}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== hostname ====<br />
{{required}}<br />
<br />
hostname = my IP or ddns<br />
<br />
examples:<br />
hostname = 192.168.1.120<br />
hostname = willy.noip.org<br />
<br />
<br/><br />
<br />
==== my_password ====<br />
{{required}}<br />
<br />
my_password = 4 hex bytes, 8 chara<br />
<br />
example:<br />
my_password = 98AF3E25<br />
<br />
<br/><br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port= define incoming UDP port(s) used by Gbox protocol<br />
<br />
port= port#1[[,port#2]...[,port#32]]<br />
<br />
Maximum 32 ports.<br />
<br />
<br/><br />
<br />
==== proxy_card ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy reader card(s) to be reshared into gbox network, default = none<br />
<br />
proxy_card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
example:<br />
<br />
proxy_card = 18300000,0D950400,05050F00 <br />
<br />
<br/><br />
<br />
==== ccc_reshare ====<br />
{{Optional/en}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = enable cccam-cards to be reshared into gbox network, default = 0 (global setting)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' must set up caids to be reshared in 'ccc_gbx_caid ='<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' unique peer reshare level to be set in oscam.server [reader]-> cccam_reshare<br />
<br />
<br/><br />
<br />
==== ccc_gbx_caid ====<br />
{{Optional/en}}<br />
<br />
ccc_gbx_caid = caid_1,caid_2,...<br />
<br />
- note: 'ccc_reshare' must be set as well<br />
<br />
<br/><br />
<br />
==== my_vers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9645:04/09/2014</span><br />
<br />
<br />
my_vers = version<br />
<br />
set gbox version hexadecimal low byte<br />
<br />
default = 2A<br />
<br />
<br/><br />
<br />
==== my_cpu_api ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9712:05/11/2014</span><br />
<br />
<br />
my-cpu_api = byte<br />
<br />
set gbox CPU and API byte in hexadecimal, default = 40<br />
default = 40<br />
<br />
<br/><br />
<br />
==== gbox_reconnect ====<br />
{{Optional/en}}<br />
<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min:60, max:300<br />
<br />
<br/><br />
<br />
==== accept_remm_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11399:29/01/2018</span><br />
<br />
Accept to send Remote EMMs to specified Server Peer-IDs<br />
<br />
accept_remm_peer = peer#1[[,peer#2]...[,peer#8]]<br />
<br />
<br/><br />
<br />
==== dis_attack_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11360:16/02/2017</span><br />
<br />
Disable creation of attack.txt<br />
<br />
dis_attack_txt = 0|1 - default: 0 <br />
<br />
<br/><br />
<br />
==== log_hello ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11231:20/04/2016</span><br />
<br />
Display hello messages in debug log<br />
<br />
log_hello = 0|1 - default: 1 <br />
<br />
<br/><br />
<br />
==== ignore_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Ignore specific peer ID(s) totally. Login rejected.<br />
<br />
ignore_peer = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== block_ecm ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Block ECM for specific peer ID(s).<br />
<br />
block_ecm = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== tmp_dir ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/2014</span><br />
<br />
gbox tempory directory<br />
<br />
tmp_dir = /path/to/dir <br />
<br />
default: /tmp/.oscam<br />
<br />
<br/><br />
<br />
==== gsms_disable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9714:05/11/2014</span><br />
<br />
<br />
gsms_disable = 0|1<br />
<br />
0 - Gbox Short Message Service (GSMS) is enabled<br/><br />
1 - disable gbox short message service (GSMS)<br/><br />
<br />
default = 1<br />
<br />
<br/><br />
<br/><br />
<br />
==== gbox_save_gsms ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_save_gsms=0|1<br />
<br />
0 = don't save GSMS in configuration<br/><br />
1 = save all GSMS field in configuration<br />
<br />
You need to press save button to really save it!<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_type=0|1<br />
<br />
0 = normal text message<br/><br />
1 = normal text message + OSD (On Screen Display)<br />
<br/><br />
<br/><br />
<br />
==== gbox_dest_peers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_dest_peers = [BOXID[,BOXID]...[,BOXID]]<br />
<br />
Maximum 16 * 2 bytes (4 hexa digits), comma-separated. For broadcast to all use FFFF.<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_txt=Your text to send to peers.<br />
<br />
From 6 to 127 alphanumerical characters.<br />
<br/><br />
<br/><br />
<br />
=== DVBapi ===<br />
{{Optional/en}}<br />
<br />
Section required only if OSCam will also be used as client!<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional/en}}<br />
<br />
DVB API enabled<br />
<br />
Example:<br />
enabled = 0 # disabled (default)<br />
enabled = 1 # enabled<br />
<br />
==== user ====<br />
{{required}}<br />
user name for DVB API client<br />
Example:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
==== au ====<br />
{{Optional/en}}<br />
<br />
AU mode for dvbapi:<br />
au = 0 # disable AU (default)<br />
au = 1 # enable AU<br />
<br />
==== pmt_mode ====<br />
{{Optional/en}}<br />
PMT mode:<br />
pmt_mode = 0 # use camd.socket and PMT file (default)<br />
pmt_mode = 1 # disable reading PMT file<br />
pmt_mode = 2 # disable camd.socket<br />
pmt_mode = 3 # read PMT file on startup only<br />
pmt_mode = 4 # do not use signal handler for monitoring /tmp<br />
pmt_mode = 5 # do not use signal handler to monitor /tmp & disable camd.socket<br />
pmt_mode = 6 # use PMT server mode <span style="background-color:Green;color:White;padding:0 5px;">NEU - NEW - NOUVEAU - NUOVO svn8680:05/06/2013</span><br />
<br />
==== request_mode ====<br />
{{Optional/en}}<br />
CAID request mode:<br />
0 = try all possible CAIDs one by one (default)<br />
1 = try all CAIDs simultaneously<br />
<br />
==== listen_port ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP/IP port for SAT IP clients, filtering has to be done on client site<br />
<br />
0 = disabled (default)<br />
<br />
==== boxtype ====<br />
{{required}}<br />
set boxtype, auto detection of DVB API will be aspired:<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt|qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
ipbox with camd.socket support, currently only with PGI image version 0.6 or above, verified on HD models only<br />
<br />
ipbox-pmt can be used on any DGS based images (with or without camd.socket support), verified on HD models only<br />
<br />
pc is for generic pc support (currently supported on VDR with vdr-plugin-dvbapi)<br />
<br />
==== cw_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
cw_delay = milli-seconds<br />
<br />
delay of CW writing, default = none<br />
<br />
==== delayer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6808:05/14/2012</span><br />
<br />
delayer = milli-seconds<br />
<br />
minimum time to write CW<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
= 1 reopen demux devices in each channel switching,<br />
= 0 default<br />
<br />
==== decodeforever ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = trying to decode on all CAIDs<br />
0 = default<br />
<br />
==== ecminfo_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10722:06/13/15</span><br />
<br />
Define the type of ecm.info file to create, ecminfo_type = 0|1|2|3|4|5<br />
<br />
0 = default oscam syntax<br />
1 = default oscam syntax with ecmtime in ms instead of s<br />
2 = wicardd<br />
3 = mgcamd<br />
4 = cccam<br />
5 = camd3<br />
<br />
==== read_sdt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10766:06/15/15</span><br />
<br />
If it is not yet available, this option automatically add entries in your oscam.srvid2 (or oscam.srvid) and in your oscam.provid files. You need to stay '''more than 30 seconds''' on a channel for the auto-detect to start. So both channel name and provider name are retrieved. If entries already exist they are not changed nor updated, so you keep full control on the content of both files, only missing entries are added.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = disabled (default)<br />
1 = on, do not save FTA channels<br />
2 = on, save FTA channels<br />
<br />
==== write_sdt_prov ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10841:06/27/15</span><br />
<br />
First enable the read_sdt parameter then you can specify if the provider name is saved or not into the oscam.srvid2 or oscam.srvid file. This is not mandatory since the provider name is now retrieved automatically from the oscam.provid file.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = off, do not write provider name into oscam.srvid/2 (default)<br />
1 = on, write provider name into oscam.srvid/2<br />
<br />
=== Anticasc ===<br />
Section is needed if anticascading will be used to protect against unauthorized forwarding CardSharing. <br />
{{OSCamConfAnticascParameter}}<br />
<br />
==== enabled ====<br />
{{required}}<br />
<br />
enabled anti-cascading:<br />
enabled = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== numusers ====<br />
{{Optional/en}}<br />
anti-cascading: user per account (number)<br />
numusers = 0 # anticascading disabled (default)<br />
= 1 # cascading for 1 user allowed ==> (1*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 11 ecms allowed per minute<br />
= 2 # cascading for 2 users allowed ==> (2*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 17 ecms allowed per minute <br><br />
<span style="color:Blue;padding:0;5px"><B>10</B></span> = number you have put in oscam.ac. Default value is 10<br />
<br />
==== sampletime ====<br />
{{Optional/en}}<br />
duration of sample in minutes:<br />
sampletime = 5 # duration 5 minutes<br />
= # [blank] duration 2 minutes (default)<br />
<br />
Ex: numusers = 1 ==> 11 ecms * 5 minutes ==> 55 ecms allowed in 5 minutes <br />
numusers = 2 ==> 17 ecms * 5 minutes ==> 85 ecms allowed in 5 minutes<br />
<br />
==== samples ====<br />
{{Optional/en}}<br />
<br />
number of additionnal ecms allowed (possible values between 2 and 10)<br />
samples = 7 # 7 additional ecms allowed<br />
= # [blank] 10 additional ecms allowed (default)<br />
<br />
==== penalty ====<br />
{{Optional/en}}<br />
Level of the penalty if the user exceeds the result shown in Ex on Sampletime<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay ([[OSCam/en/Config/oscam.conf#fakedelay|fakedelay]])<br />
<br />
penalty can be overwritten per user in oscam.user<br />
<br />
==== aclogfile ====<br />
{{Optional/en}}<br />
file for anti-cascading logging<br />
aclogfile =<br />
= # [blank] no logfile (default)<br />
<br />
==== fakedelay ====<br />
{{Optional/en}}<br />
<br />
fake delay time in milli seconds (possible values between 100 and 3000)<br />
fakedelay = 500 # delay 500 milli seconds<br />
= # [blank] 1000 milli seconds (default)<br />
<br />
==== denysamples ====<br />
{{Optional/en}}<br />
<br />
How many samples should be penalized?<br />
denysamples = 10 # 10 samples will be penalized<br />
= # [blank] 8 Samples will penalized (default)<br />
<br/><br />
<br />
==== acosc_enabled ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br/><br />
acosc_enabled = 0|1<br />
1 = enable anticascading oder SIDs count<br />
0 = default<br />
<br/><br />
==== acosc_max_active_sids ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = count<br />
<br />
maximum activ SIDs with anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br />
<br/><br />
<br />
==== acosc_zap_limit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = count<br />
<br />
zap limit for anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
level of penalty with anticascading over SIDs count:<br />
<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = seconds<br />
<br />
penalty duration for anticascading over SIDs count:<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
==== acosc_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_delay = milliseconds<br />
<br />
delay for anticascading over SIDs count<br />
<br />
0 = unlimites (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
<br />
<br />
<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.conf&diff=13530
OSCam/de/Config/oscam.conf
2020-02-24T17:25:05Z
<p>Felixka: /* GBox */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.conf''' ==<br />
Dies ist die Hauptkonfigurationsdatei für OSCam. Sie enhält globale Parameter z.B. für das Debuggen, Loggen und den Loadbalancer, sowie einzelne Sektionen für Sondereffekte wie z.B. den Monitor, das Web-Interface, die Protokolle, das DVBapi und das Anti-Cascading. Nur die Sektion [global] ist Pflichtbestandteil, alle übrigen Sektionen sind optional (also nur bei Bedarf) zu verwenden.<br />
<br />
<br />
=== '''Globale Parameter''' ===<br />
Folgende Parameter gibt es im [global] Abschnitt:<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Ist ein Parameter leer oder wird er nicht im Konfigurationsfile angeführt dann gelten die Default-Werte!<br />
<br />
<br />
==== nice ====<br />
{{Optional}}<br />
'''Systempriorität'''. OSCam benötigt fast keine CPU-Leistung. Wenn aber CPU-Leistung benötigt wird, sollte diese sofort zur Verfügung stehen. Werte von 20 bis -20 sind möglich, wobei 20 gering und -20 sehr hoch ist. Wird der Parameter auskommentiert(#), wird diese Funktion nicht ausgerufen. Das ist wichtig z.B. für die dbox 2[http://de.wikipedia.org/wiki/DBOX2], wenn die Fehlermeldung "''relocation error:setpriority''" erscheint. Vgl. [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Beispiel:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
<br />
===== pidfile =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8176/01/24/2013</span><br />
<br />
pidfile = filename, <br />
<br />
ändere den Namen für das pidfile und den Speicherort,<br />
mit [blank] none (default)erfolgt die Speicherung als oscam.pid in /tmp<br />
<br />
Beispiel:<br />
pidfile = /var/run/oscam.pid<br />
<br />
<br />
===== logfile =====<br />
{{Optional}}<br />
Mit diesem Parameter wird Name und Pfad und für das Logfile (mehrere sind nicht möglich) festgelegt, zusätzlich auch das Loggen in stdout oder syslog. Es ist auch möglich, das Loggen nur für stdout oder syslog festzulegen und somit keine Logdatei zu schreiben.<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
Möglichkeiten:<br />
logfile = /var/log/oscam.log # Datei oder Linuxdevice (z.B. /dev/tty)<br />
logfile = syslog # Die Ausgabe wird an den syslogd übergeben<br />
logfile = stdout # Bildschirmausgabe<br />
<br />
Beispiel:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format des logfile:<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timed out<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
<br />
===== ecmfmt =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8056:01/03/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
definiert ECM log format, default:c@p/i/s/l:h:Y:t <br />
<br />
mögliche Variablen: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and cccam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , diese ID wird durch die Tierbeschreibung aus der oscam.tiers (falls vorhanden) ersetzt<br />
w = CW<br />
y = Payload (kurz, 3 Bytes)<br />
Y = Payload (lang, 6 Bytes)<br />
<br />
benutze einen Wert als Prefix, um eine Variable mit diesem Wert zu verbergen<br />
<br />
Beispiel:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w <br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn10048:11/30/13/2013</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs werden eingefügt, wenn CWs nicht ein ungleiches oder gleiches Muster haben (default)<br />
1 = disabled<br />
<br />
<br />
===== loghistorysize =====<br />
{{Optional}}<br />
loghistorysize = bytes<br />
<br />
Größe der Log-Messages-History im WebIf oder Monitor in Bytes<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) # ist nur wirksam, wenn '''preferlocalcards = 1''' in der [global] section gesetzt ist, sonst unter stage 3!<br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
Beispiel:<br />
<br />
P/2/2/2 oder L/2/4/4<br />
<br />
<br />
===== maxlogsize =====<br />
{{Mandatory}}<br />
<br />
Hier kann die maximale Größe des Logfiles in KBytes festgelegt werde. Das ist besonders wichtig für Server mit nur geringem Speicherumfang (z.B. auf dbox2). Darum wird dringend empfohlen, bei solchen Servern diese Größe sorgfältig zu bestimmen. Nicht selten "platzt" ein System, weil die Logfiles unkontrolliert riesige Ausmaße angenommen haben!<br />
<br />
Beispiel<br />
maxlogsize = 20 # Logfile geht bis zu 20 KBytes<br />
= 0 # Logfile erhält '''unbegrenzte''' Größe<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile geht bis zu 10 KBytes (default)<br />
<br />
<br />
===== logduplicatelines =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8290/02/05/2013</span> <br />
<br />
logduplicatelines = 0|1<br />
<br />
= 1 schaltet das Schreiben von Duplikatzeilen im Logfile aus<br />
= 0 schaltet das Schreiben von Duplikatzeilen im Logfile ein = default<br />
<br />
<br />
===== disablelog =====<br />
{{Optional}}<br />
Schaltet Logfile<br />
1 = Ausschalter ein, also '''kein''' Log - puh ;-) -<br />
0 = Ausschalter aus, also '''ein''' Log<br />
<br />
Beispiel:<br />
disablelog = 1 # es wird '''kein''' Log erstellt<br />
<br />
Default:<br />
disablelog = 0 # es wird '''ein''' Log erstellt<br />
<br />
<br />
===== cwlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für CW-Logging eingestellt werden. Der Pfad ist relativ zum Workdirectory und muss existieren, sonst werden keine Logs erstellt und auch keine Fehler ausgegeben.<br />
<br />
CWs (control words) sind die Antworten der Karte mit der ein bestimmter Sender für einige Sekunden freigeschaltet wird bevor das nächste cw übertragen wird. Die cw Logdatei kann dazu verwendet werden, den Sender zeitversetzt zu entschlüsseln. Das wird auch "Offline Decoding" genannt. Siehe [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
OScam erstellt für jeden Sender und jeden Tag eine neue *.cwl Datei mit Datum, Service-ID und Sendername, z.B. 110808_I000B_Sky_Cinema_+1.cwl mit diesem Inhalt:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
Wenn mindestens ein User diesen Sender schaut, werden alle notwendigen CWs gespeichert.<br />
Bitte einen Speicherort mit genügend Platz angeben, da pro Tag und Sender einge 10KB an Daten anfallen. Empfehlenswert ist ein Skript, das die logfiles regelmässig verschiebt/löscht.<br />
<br />
Beispiel:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] kein Pfad für CW-Log, Logging abgeschaltet<br />
<br />
<br />
===== emmlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für EMM-Logging eingestellt werden. Welche EMMs mitgeloggt werden sollen, kann mit den "saveemm-*"-Parametern in der oscam.server detailliert eingestellt werden.<br />
<br />
Beispiel:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] Es wird der Config-Ordner verwendet<br />
<br />
<br />
===== usrfile =====<br />
{{Optional}}<br />
Festlegung des Namens eines Files für user logging.<br />
<br />
Das user logging file hat folgendes Format<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Beispiel:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
<br />
===== disableuserfile =====<br />
{{Optional}}<br />
Jetzt wird es ganz wild: Auch wenn ein Logfile eingeschaltet ist (siehe logfile) kann hier das userfile ausgeschaltet werden.<br />
<br />
Beispiel:<br />
disableuserfile = 1 # es wird '''kein''' userfile erzeugt<br />
= 0 # es wird '''ein''' userfile erzeugt<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
<br />
===== usrfileflag =====<br />
{{Optional}}<br />
Einstellung des Logging-Modus<br />
0 = Es wird nur das Ein- und Ausloggen des Clients im Userfile geloggt<br />
1 = Jedes Zappen eines Clients wird im Userfile geloggt<br />
Default-Wert ist 0<br />
<br />
Beispiel:<br />
usrfileflag = 1 # Alles wird geloggt<br />
<br />
Default:<br />
usrfileflag = 0 # Nur Login und Logout wird geloggt<br />
<br />
<br />
===== saveinithistory =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn7128;07/02/2012</span><br />
<br />
Sicherung der Reader-Init-History. Wird benötigt, um die Entitlements anzuzeigen.<br />
<br />
Beispiel:<br />
saveinithistory = 1 # Sicherung nach /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # Keine Sicherung<br />
<br />
<br />
===== disablemail =====<br />
{{Optional}}<br />
disablemail = 0|1<br />
<br />
Schaltet das Speichern von NDS Videoguard MailMessages des Providers aus. Default: 1 (disabled)<br />
<br />
<br />
===== mailfile =====<br />
{{Optional}}<br />
mailfile = file<br />
<br />
Legt das File fest, in dem NDS Videoguard MailMessages des Providers gespeichert werden sollen.<br />
<br />
Default: [blank] kein File.<br />
<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
Delay in Millisekunden für eine Anfrage an cache exchange mode 1 reader, default: kein delay<br />
<br />
<br />
==== reader ====<br />
===== enableled =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
<br />
===== serialreadertimeout =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8541:03/13/2013</span><br />
<br />
'''Nur wenn Serialreader benutzt wird'''<br />
Timeout in Millisekunden für Serialreader<br />
<br />
Beispiel:<br />
serialreadertimeout = 1200 # Timeout nach 1200 Millisekunden<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout nach 1500 Millisekunden<br />
<br />
<br />
===== waitforcards =====<br />
{{Optional}}<br />
Hier kann festgelegt werden, ob OSCam beim Start des Programms auf lokale Karten wartet, bevor die Netzwerkports geöffnet werden.<br />
<br />
Beispiel:<br />
waitforcards = 0 # Nicht Warten<br />
<br />
Default:<br />
waitforcards = 1 # Warten<br />
<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional}}<br />
waitforcards_extra_delay = Millisekunden<br />
<br />
Zusätzliche Verzögerung in Millisekunden nach Warten auf lokale SCs während des Starts vor dem Öffnen von Netzwerk-Ports<br />
<br />
default = 500<br />
<br />
<br />
===== preferlocalcards =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9605:03/29/2014</span><br />
<br />
Der Parameter legt fest, welche Quelle zuerst für die Dekodierung verwendet werden sollen.<br />
<br />
Beispiel:<br />
preferlocalcards = 0 # lokale Karten werden wie remote Reader behandelt<br />
<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
preferlocalcards = 2 # Lokale Karten werden dem CacheEX vorgezogen<br />
<br />
Default:<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
<br />
===== readerrestartseconds =====<br />
{{Optional}}<br />
Festlegung einer Wartezeit in Sekunden zwischen Restarts von Readern.<br />
<br />
Beispiel:<br />
readerrestartseconds = 10 # Wartezeit 10 Sekunden<br />
= 0 # '''keine Readerrestarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # Wartezeit 5 Sekunden<br />
<br />
<br />
===== block_same_ip =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_ip = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit derselben IP-Addresse zurück, default = 1<br />
0 = nicht zurückweisen<br />
<br />
<br />
===== block_same_name =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_name = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit demselben Namen zurück, default = 1<br />
0 = Nicht zurückweisen<br />
<br />
<br />
==== cache ====<br />
===== cachedelay =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
<br />
===== max_cache_time =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clienten-Anfrage im cache verbleiben. Die zeit muss 2 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
===== max_cache_count =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = Anzahl, default 1000<br />
<br />
Maximale Zahl von CWs im cache<br />
<br />
<br />
===== cacheexwaittime =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
Maximale Wartezeit für einen Cache-Zugriff in Millisekunden für cacheex = 1 Reader.<br />
50 Millisekunden = default<br />
<br />
<br />
===== cacheexenablestats =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== client ====<br />
===== clienttimeout =====<br />
{{Optional}}<br />
<br />
Maximale Zeit in Millisekunden, bevor ein Client ein Timeout erhält.<br />
<br />
Beispiele:<br />
clienttimeout = 10000 # nach 10 Sekunden erfolgt ein Timeout<br />
clienttimeout = 10 # hier erfolgt aber ein Timeout bereits nach 10 Millisekunden, s. Hinweis unten!<br />
clienttimeout = 8 # der Timeout erfolgt nach 8000 Millisekunden (= 8 Sekunden), s. Hinweis<br />
Default:<br />
clienttimeout = 5000 # nach 5000 ms (=5 Sekunden) erfolgt ein Timeout<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bei Werten < 10 (also 1 bis 9) werden diese mit Eintausend multipliziert, aus "5" wird also 5000 ms. Eine eingetragene "10" bleibt aber bei zehn Millisekunden!<br />
<br />
===== clientmaxidle =====<br />
{{Optional}}<br />
Begrenzt die Leerlaufzeit eines Clienten in '''Sekunden''' bevor er vom Traffic getrennt wird.<br />
<br />
Beispiel:<br />
clientmaxidle = 200 # Trennung nach 200 Sekunden<br />
= 0 # Begrenzung ist ausgeschaltet, keine Trennung vom Traffic beim Leerlauf!<br />
<br />
Default:<br />
clientmaxidle = 120 # Trennung nach 120 Sekunden<br />
<br />
<br />
===== suppresscmd08 =====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
suppresscmd08 = 0 # Mitteilung an Clienten mit den Protokollen camd 3.5x, 3.57x und 3.78x, keine neuen Anfragen wegen <br />
zurückgewiesener Kombination aus CAID, SID und Provider-ID zu schicken (default)<br />
= 1 # Anfragen sollen weiterhin geschickt werden<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
<br />
==== fallbacktimeout ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Bei mehreren Readern (Siehe Abschnitt [reader] in oscam.server) kann ein Reader bestimmt werden, auf den z.B. bei einer Störung der übrigen Reader der traffic zurück fällt.<br />
<br />
Maximale Wartezeit des [[Cardserver]]s in Millisekunden auf primäre [[Reader]], bevor der/die [[Fallback]]-Reader (falls vorhanden!) befragt werden.<br />
<br />
Beispiel:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Der Wert muss größer dem Wert von "serialreadertimeout" gewählt werden, ansonsten werden die Standardwerte verwendet.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = Millisekunden<br />
<br />
Wartezeit in Millisekunden, bevor der für eine CAID reservierte [[Reader]] befragt wird.<br />
<br />
Default = 2500<br />
<br />
<br />
==== sleep ====<br />
{{Optional}}<br />
Alle User nach "n" Minuten "inaktivieren", wenn diese den Sender nicht innerhalb der eingestellten Zeit wechseln. Diese Einstellung kann auch für jeden User separat vorgenommen werden: [[OSCam/de/Config/oscam.user#sleep]]<br />
<br />
Beispiel:<br />
sleep = 240 # inaktiv nach 4 Stunden<br />
<br />
Default:<br />
sleep = # [blank]<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam hört auf ALLE IP Adressen.<br />
<br />
<br />
==== bindwait ====<br />
{{Optional}}<br />
Maximale Zeit in Sekunden, die der [[Cardreader]] beim Start wartet, bis er den jeweiligen Netzwerk-Port in Zugriff bekommt. Falls der OSCam innerhalb dieser Zeit den Port nicht binden kann, terminiert er mit "Bind Request failed". Ursachen dafür sind<br />
* Doppelbelegung von Ports<br />
* Ein vormals abgestürzter OSCam der die Ports nicht wieder freigegeben hat<br />
* OSCam wurde mehrmals gleichzeitig gestartet<br />
<br />
Beispiel:<br />
bindwait = 20 # Wartezeit 20 Sekunden<br />
<br />
Default:<br />
bindwait = 120 # Wartezeit 120 Sekunden<br />
<br />
<br />
==== netprio ====<br />
{{Optional}}<br />
Hier kann die Priorität des Cardservers im Netzwerk festgelegt werden<br />
<br />
Beispiel:<br />
netprio = 1 # Prioritätsstufe 1<br />
<br />
Default:<br />
netprio = 0 # Systembedingte Priorität<br />
<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional}}<br />
Art der DNS-Auflösung. Dies sind zwei verschiedene libc-Aufrufe für die Namensauflösung, weil einige ältere Systeme Probleme mit der moderneren Implementierung ''getadressinfo'' haben bzw. diese Funktion aus ihren Images gestrippt wurden (zB die alte dBox2). Außerdem ist ''getadressinfo'' threadsafe, während ''gethostbyname'' es nicht ist und deshalb locks drumherum im Code benötigt. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Beispiel:<br />
resolvegethostbyname = 1 # Name wird mittels ''gethostbyname'' aufgelöst<br />
<br />
Default:<br />
resolvegethostbyname = 0 # ''getadressinfo'' wird benutzt<br />
<br />
<br />
====failbancount====<br />
{{Optional}}<br />
Failbancount = Anzahl der erlaubten Fehlversuche mit falschen Zugangsdaten. <br />
= 0 (default) IP wird sofort beim ersten Versuch mit unbekannten Zugangsdaten gesperrt!<br />
<br />
Wenn innerhalb '''failbantime''' mehr als in '''failbancount''' erlaubte Versuche registriert wurden, wird die IP für die restliche failbantime gesperrt. Nach Ablauf von failbantime stehen wieder volle failbancount zur Verfügung. Failbancount ist also eine Lockerung der Regeln<br />
<br />
<br />
==== failbantime ====<br />
{{Optional}}<br />
Zeitspanne in Minuten, für die ein Client mit ungültigem Login-Versuch auf IP-Basis geblockt wird.<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP Adresse wird für 5 Minuten geblockt. Neue Loginversuche werden ignoriert auch wenn das Login OK wäre.<br />
# Es wird kein Clientthread erstellt.<br />
<br />
Default:<br />
failbantime = 0 # failban ist ausgeschaltet (default)<br />
<br />
<br />
==== dropdups ====<br />
{{Optional}}<br />
Möglichkeiten zur Duplizierung von Client-Verbindungen. Es wird damit die Reaktion auf den [[OSCam/de/Config/oscam.user#uniq|uniq]]-Parameter festgelegt.<br />
<br />
0 = Markierung des Clienten als Duplikat aber keine Trennung (default)<br />
1 = Abbrechen der Duplikat-Verbindung anstelle einer Markierung als Duplikat<br />
<br />
<br />
==== unlockparental ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7289:08/27/2012</span><br />
<br />
'''Nur Seca und Viaccess'''<br />
<br />
Option zum Ausschalten der Jugendschutzfunktion für Seca und Viaccess Pin Code Anfragen bei adult movies.<br />
Bei Viaccess z.B. für die Redlight Elite HD Smartcard. Mit unlockparental = 0 bleibt Dorcel Dunkel mit 1 wirds hell!<br />
<br />
Beispiel:<br />
unlockparental = 1 # Jugendschutzfunktion ausgeschaltet<br />
<br />
Default:<br />
unlockparental = 0 # Jugendschutzfunktion von Seca und Viaccess eingeschaltet<br />
<br />
<br />
==== double_check ====<br />
{{Optional}}<br />
'''Nur wenn CW double check ausgewählt ist!'''<br />
<br />
ECM wird zu 2 oder mehr Readern mit der selben SC gesandt und die CW's werden gegeneinander verifiziert. lb_nbes_reader muss auf 2 oder höher gesetzt werden.<br />
<br />
Beispiel:<br />
double_check =<br />
<br />
Default:<br />
double_check = 0<br />
<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|erste 2 digits von CAID1],[CAID2|erste 2 digits von CAID2],... = [blank] keine [default]<br />
<br />
ECM wird an 2 oder mehr Reader mit der gleichen SC gesendet und die CW's werden gegen andere definierte CAIDs oder die ersten 2 bytes der CAIDs verifiziert. lb_nbest_readers muss auf 2 oder höher gesetzt sein!<br />
<br />
<br />
==== Loadbalancer ====<br />
===== lb_mode =====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Wenn hier loadbalancing aktiviert wird, dann sind die in oscam.server bei services stehenden Besonderheiten zu beachten. Siehe [[streamboard:wiki/OSCam/de/Config/oscam.server#services|Services]]!<br />
<br />
Loadbalance Mode<br />
<br />
Wenn man zwei oder mehrere gleiche Karten hat (egal ob lokal oder als Proxie), kann man die Last auf diese Karten gleichmäßig verteilen (balancieren).<br />
<br />
Beispiel:<br />
lb_mode = 0 (deaktiviert) (default)<br />
lb_mode = 1 (schnellster Reader zuerst)<br />
lb_mode = 2 (Reader der am längsten nicht geantwortet hat wird genommen)<br />
lb_mode = 3 (Reader mit der geringsten Auslastung wird verwendet)<br />
lb_mode = 10(LB ist ausgeschaltet, Senderstatistik wird trotzdem erstellt)<br />
<br />
Default:<br />
lb_mode = 0 # deaktiviert<br />
<br />
<br />
===== lb_save =====<br />
{{Optional}}<br />
Speichert die Loadbalance Statistik, damit sie auch nach einem Neustart erhalten bleibt.<br />
Um die CPU nicht zu sehr zu belasten, sollte hier ein Wert > 100 eingetragen werden.<br />
<br />
Beispiel:<br />
lb_save = 100 # Anzahl der ECM's nach der die Statistik gespeichert wird<br />
<br />
Default:<br />
lb_save = 0 # Statistik wird nicht gespeichert<br />
<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional}}<br />
Anzahl der Reader, die für die ECM anfragen.<br />
<br />
Beispiel:<br />
lb_nbest_readers = 2 # Anfragen gehen immer an zwei Reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # Anfrage geht nur an einen Reader<br />
<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional}}<br />
Anzahl der Fallback Reader für den Lastenausgleich.<br />
<br />
Beispiel:<br />
lb_nfb_readers = 2 # Zwei Fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1<br />
<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mod<br />
= 0 # Standardverfahren zum (späten) Wiederöffnen blockierender Reader (default)<br />
= 1 # Schnelles Wiederöffnen blockierender Reader<br />
<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5893:08/19/2011</span><br />
<br />
Anzahl der Reader je CAIDs für das Loadbalancing, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Default:<br />
lb_nbest_percaid = 0<br />
<br />
Beispiel:<br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wird so lange blockiert, bis die Statistik aufgeräumt ist<br />
1 = default<br />
<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = öffne alle gestoppten Reader sofort, wenn kein funktionierender Reader gefunden wird<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional}}<br />
Mindestanzahl der ECM's, die für die Auswertung genommen werden.<br />
<br />
Beispiel:<br />
lb_min_ecmcount =<br />
<br />
Default:<br />
lb_min_ecmcount = 5<br />
<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional}}<br />
Maximale Anzahl der ECM's, bevor der Loadbalancer zurückgesetzt wird.<br />
<br />
Beispiel:<br />
lb_max_ecmcount =<br />
<br />
Default:<br />
lb_max_ecmcount = 500<br />
<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional}}<br />
Zeitspanne in Sekunden zwischen neuem Verbindungsversuch zu verlorengegangenen readern/CAIDs/providers/services<br />
<br />
Beispiel:<br />
lb_reopen_seconds = 500 # Nach 500 Sekunden neuer Verbindungsversuch<br />
<br />
Default:<br />
lb_reopen_seconds = 900<br />
<br />
<br />
===== lb_retrylimit =====<br />
{{Optional}}<br />
Verbindungsversuch zum nächsten reader '''nur wenn''' die Antwortzeit höher, als hier festgelegt in '''Millisekunden'''.<br />
<br />
Beispiel:<br />
lb_retrylimit = 500 # Verbindungsversuch zum nächsten reader nur, wenn die Antwortzeit höher als 500 ms ist.<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
<br />
===== lb_savepath ===== <br />
{{Optional}}<br />
Dateiname für die Sicherung der Loadbalancing Statistiken<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional}}<br />
Zeit in Stunden, nach der die Statistiksätze gelöscht werden sollen<br />
<br />
default = 336<br />
<br />
<br />
===== lb_use_locking =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6166:12/28/2011</span><br />
<br />
Unterdrückt parallele und identische ECM-Anfragen<br />
<br />
1 = ein<br />
0 = aus # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* Man sollte diese Option nur anschalten wenn:<br />
** Langsames system<br />
** Hohe Last<br />
**Gleiche ECM Anfragen nicht aus dem Cache kommen, sondern weiter Reader angefragt werden<br />
<br />
* Vorteile aktiviert:<br />
** Durch die Synchronisierung wird ein ECM Request nach dem anderen durchgeführt, die Ermittlung von Cache oder Request und Zuordnung der Reader über den Loadbalancer ist immer erfolgreich<br />
<br />
* Nachteile aktiviert:<br />
** Die Synchronisierung verhindert Multithreading und es kommt eventuell zu höheren Antwortzeiten<br />
<br />
* Vorteile NICHT aktiviert:<br />
** Schnellere Durchlaufzeiten für ECM requests<br />
<br />
* Nachteile NICHT aktiviert:<br />
** Eventuell doppelte (bzw n-fache) ECM requests an die Reader möglich<br />
<br/><br />
<br />
<br />
===== lb_retrylimits =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,CAID2:time2]...<br />
<br />
Begrenzung der Zeit für einen retry des loadbalancing eines CAID in Millisekunden, wildcard CAIDs mit two-digit CAIDs möglich, <br />
<br />
default: [blank]<br />
<br />
Beispiel:<br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
Ignoriere die Providerinformations-CAIDs, um die statistischen Daten zu reduzieren, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Beispiel:<br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx und 34xx)<br />
<br />
default = [blank]<br />
<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # ermöglicht ein automatisches timeout auf der Basis von Statistiken des Loadbalancers<br />
= 0 # default<br />
<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = Prozent<br />
<br />
Prozentwert, mit dem die Timeout-Zeit beaufschlagt wird<br />
default = 30<br />
<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = Millisekunden<br />
<br />
Minimale Zeit in Millisekunden, die zur Timeout-Zeit hinzuaddiert wird<br />
default = 300<br />
<br />
<br />
===== lb_max_readers =====<br />
{{Optional}}<br />
lb_max_readers = limit (Zahl)<br />
<br />
beschränkt die Zahl der Reader während der Lernphase des Loadbalancing<br />
<br />
0 = unbegrenzt (default)<br />
x = beschränkt auf ein Limit von x (Zahl)<br />
<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional}}<br />
lb_auto_betatunnel = 0|1<br />
<br />
Ermöglicht automatisches Betatunneling für Betacrypt (CAIDs 1801, 1833, 1834 und 1835), wenn Loadbalancing verwendet wird<br />
lb_auto_betatunnel = 0 # ausgeschaltet<br />
= 1 # eingeschaltet (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Eintragungen für Betatunnel in oscam.user werden bevorzugt. Siehe [[streamboard:wiki/index.php/OSCam/de/Config/oscam.user#betatunnel|Betatunnel]]<br />
<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
setzt den Mode für das automatische Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only)<br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = Auswahl (Zahl)<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = immer Betacrypt<br />
105 = wählt einen Mittelwert<br />
200 = immer Nagravision<br />
<br />
<br />
=== '''Monitor''' ===<br />
Hier sind nur dann Eintragungen erforderlich, wenn ein Monitor benutzt wird!<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
UDP-Port für den Monitor<br />
port = 0 # Kein Monitor<br />
= # [blank] Portnummer Monitor ausgewählt<br />
<br />
Beispiel:<br />
port = 24480 # Monitor eingeschaltet mit Port 24480<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Service mit einer bestimmten IP-Adresse verbinden<br />
serverip = # IP-Adresse<br />
= # [blank] alle IP's (default)<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Unverschlüsselte Monitorverbindungen.<br />
<br />
Möglich<br />
* eine oder mehrere IP-Einzeladressen<br />
* eine oder mehrere IP-Bereiche<br />
* eine Mischung von IP-Einzeladressen oder IP-Bereichen<br />
<br />
Beispiel<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 und IP-Bereich 192.168.0.0 bis 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] keine unverschlüsselte Monitorverbindung.<br />
<br />
<br />
==== aulow ====<br />
{{Optional}}<br />
Zeitraum in Minuten, in dem keine EMM erscheinen, so dass der Client von "active" auf "on" gesetzt wird.<br />
<br />
Beispiel<br />
aulow = 30 # Nach 30 Minuten ohne EMM wird der Status von "active" auf "on" gesetzt (default).<br />
<br />
<br />
==== monlevel ====<br />
{{Optional}}<br />
Monitor-Level<br />
0 = Kein Zugriff auf Monitor (default)<br />
1 = Nur Server und eigene Prozeduren<br />
2 = Alle Prozeduren, aber nur ansehen<br />
3 = Alle Prozeduren, reload von oscam.user möglich<br />
4 = Unbeschränkter Zugriff<br />
<br />
Beispiel<br />
monlevel = 4 # Kompletter Zugriff<br />
<br />
Monlevel kann durch Eintragungen in oscam.user überschrieben werden!<br />
<br />
<br />
==== hideclient_to ====<br />
{{Optional}}<br />
Zeitspanne in Sekunden für das Ausblenden von Clients, die keine Anfragen senden. Siehe auch Parameter '''httphideidleclienst''' in Abschnitt [webif].<br />
hideclient_to = 40 # Clienten werden nach 40 Sekunden ohne Anfrage ausgeblendet<br />
= 0 # Keine Ausblendung von Clienten im Leerlauf<br />
<br />
<br />
==== appendchaninfo ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8546:03/13/2013</span><br />
<br />
Fügt die Channel-Info aus der oscam.services der Log-Meldung hinzu. Bei Verwendung von Monitor und Webinterface ist dies eine sehr nützliche Routine!<br />
appendchaninfo = 1 # Die Channel-Info wird hinzugefügt<br />
= 0 # Keine Channel-Info (default)<br />
<br />
<br />
=== '''lcd''' ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
<br />
==== lcd_outputpath ====<br />
{{Optional}}<br />
Hier kann ein Pfad für den LCD-Output eingestellt werden<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
<br />
==== lcd_hideidle ====<br />
{{Optional}}<br />
Verbergen eines Readers im LCD-Output während des Leerlaufs<br />
<br />
lcd_hideidle = 1 # Verbergen, wenn der Leerlauf länger als 20 Sekunden dauert<br />
= 0 # default<br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional}}<br />
LCD-Refresh-Interval in Sekunden (Minimum 5 Sekunden)<br />
<br />
Default:<br />
lcd-writeinterval = [blank] 10 Sekunden<br />
<br />
<br />
=== '''WebIf''' ===<br />
Eintragungen sind nur dann erforderlich, wenn das Web-Interface (by Alno) als Modul ausgewählt wurde.<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
<br />
==== Dateiformat zum Senden von EMMs via Webinterface ====<br />
(von Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' <br />
<br />
* Die Datei muß im TXT Format sein.<br />
* Jedes PRE-CAM EMM muss in einer eigenen Zeile vorliegen.<br />
* Die EMMs müssen im HEX Format vorliegen.<br />
** Beispiel: AABBCCDD...<br />
* Leerzeichen und Tabs zwischen den bytes sind erlaubt:<br />
** AA BB CC DD...<br />
* Groß- und/oder Kleinschreibung oder gemischte Schreibweise für jeden HEX-Wert sind erlaubt:<br />
** AA aa Aa aA...<br />
* Andere Zeichen oder Kommentare sind nicht erlaubt.<br />
<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
Port, auf dem das Webinterface hört.<br />
Standard ist Port 8888 wenn kein eintrag erfolgt<br />
<br />
httpport = 83 # Webinterface hört auf '''http-port 83'''<br />
= +83 # Webinterface hört auf '''https-port 83''' (SSL)<br />
0 # Webinterface ist ausgeschaltet<br />
<br />
<br />
==== httpcert ====<br />
{{Optional}}<br />
Datei für das SSL-Zertifikat<br />
httpcert = oscam.cert # (siehe dort!)<br />
= # [blank] es wird die Datei oscam.pem (embedded) verwendet<br />
<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
Beispiel<br />
httpforcesslv3 = 0 (default)<br />
= 1 benutze SSLv3<br />
<br />
<br />
==== httpuser ====<br />
{{Mandatory}}<br />
Name des Users für den Zugriffsschutz. Es wird zwar [blank] als Default-Wert angeboten. Davon wird aber dringend abgeraten; daher wird dieser Parameter hier als '''zwingend''' beschrieben.<br />
httpuser = # xyxyxy<br />
<br />
<br />
==== httppwd ====<br />
{{Mandatory}}<br />
Passwort für den Zugriffsschutz. Es gilt das gleiche wie für httpuser.<br />
httppwd = # 123456<br />
<br />
'''Die Parameter ''user'' und ''pwd'' werden beim Verbindungsaufbau zum Webinterface in einem Kontrollfenster abgefragt. Fehlen sie oder sind sie fehlerhaft, erfolgt die Meldung ''Forbidden'' und der Verbindungsaufbau wird abgebrochen!'''<br />
<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6825:05/15/2012</span><br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Füge den content des embedded CSS '''nicht vor''' dem content des user-css ein (default)<br />
1 # Embedded CSS wird '''vor''' dem externen CSS hinzugefügt(siehe nächsten Parameter: [[#httpcss|httpcss]])<br />
<br />
Dieser Parameter kann dazu benutzt werden, den embedded CSS mit custom styles zu überschreiben. Die laufenden CSS styles können hier angeschaut werden: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
<br />
==== httpcss ====<br />
{{Optional}}<br />
Für das Webinterface stehen verschiedene Styles in unterschiedlicher farblicher und graphischer Darstellung zur Verfügung. Der User kann die für ihn interessanten Style-Dateien (.css) speichern und je nach "Stimmung" verwenden. Hier wird der Pfad zu den Style-Dateien festgelegt.<br />
<br />
Beispiel<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] es wird der embedded Style verwendet (default)<br />
<br />
Styles werden hier veröffentlicht: [[streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
<br />
==== httptpl ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7083:06/25/12</span><br />
<br />
Pfad für externe templates und picons<br />
httptpl =<br />
= # [blank] Keine externen Templates<br />
<br />
Multiple simultane templates und picons können durch die Anlage von Unterordnern (mit max. 32 alphanumerischen Zeichen) zur Verfügung gestellt werden. Der Name des Unterordners korrespondiert mit dem Unterordner in der URL, default : [blank]<br />
<br />
Beispiele<br />
<br />
httptpl = /this/is/my/path <br />
<br />
Ordner mit multiplen templates: <br />
/this/is/my/path/template1 <br />
/this/is/my/path/template2 <br />
<br />
gültige URLs: <br />
http://host:port/template1 <br />
http://host:port/template2 <br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httpoverwritebakfile ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = überschreibe backup configurations files (*.bak)<br />
0 = default<br />
<br />
<br />
==== httplocale ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
hier kann ein "locale environment" gesetzt werden.<br />
<br />
default = [blank] kein environment<br />
<br />
Siehe auch hier:<br />
<br />
http://de.wikipedia.org/wiki/locale<br />
<br />
<br />
==== httpjscript ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
Path für oscam.js javascript, default : [blank]<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional}}<br />
Aktualisierungszeit in Sekunden, in der die (kompletten) Seiten des Webinterfaces aktualisiert werden<br />
httprefresh = 7 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httppollrefresh ====<br />
{{Optional}}<br />
<br />
Initialisierungszeit des Pollings und Aktualisierungszeit, in der diverse Daten des Webinterfaces neugeladen werden (Zeit kann auf den entsprechenden Seiten geändert werden)<br />
httppollrefresh = 60 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httpshowpicons ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # zeige picons in userlist<br />
0 # default<br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httphideidleclients ====<br />
{{Optional}}<br />
Dieser Parameter ermöglicht es, einen Clienten nach Ablauf der im Parameter '''hideclient_to''' im Abschnitt [monitor] festgelegten Leerlauf-Zeitspanne (siehe dort!) auszublenden.<br />
httphideidleclients = 1 # Ausblenden<br />
= 0 # Nicht ausblenden (default)<br />
<br />
==== httphidetype ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
Buchstabe der definiert, welcher type in der type-column auf der Statusseite des Webinterfaces versteckt werden soll. <br />
s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
<br />
==== httpscript ====<br />
{{Optional}}<br />
Pfad für Skripte, die vom Webinterface aus gestartet werden können<br />
httpscript = # Pfad<br />
= # [blank] kein Pfad<br />
<br />
<br />
==== httpallowed ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8842:08/17/2013</span><br />
<br />
Hier werden IP-Addressen, IP-Bereiche oder beides festgelegt, die auf das Webinterface zugreifen dürfen. Es wird zwar auch ein [blank] als Default-Wert angeboten, dessen Sinn sich aber nicht erschließt! Wenn das Webinterface benutzt werden soll, dann muss es auch die Möglichkeit geben, sich mit ihm zu verbinden. Daher wird dieser Parameter als '''zwingend''' dargestellt.<br />
<br />
Wenn ein localhost nach '''IPv6''' aufgelöst werden soll, muss die Zeile mit '''::1''' abgeschlossen werden!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
Beispiel<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen <br />
und werden nach IPv6 aufgelöst<br />
'''Default Werte'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255,::1<br />
<br />
<br />
==== httpdyndns ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6558:03/21/12</span><br />
<br />
Zulassen von DYNDNS-Verbindungen durch das Webinterface.<br />
<br />
httpdyndns = hostname[,hostname][,hostname]<br />
<br />
Beispiel<br />
httpdyndns = host1.exemple.com, host2.exemple.com<br />
<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional}}<br />
Sicherung der Konfigurationsdateien<br />
httpsavefullcfg = 0 # alle nicht leeren Parameter,<br />
# alle nicht Default-Parameter,<br />
# alle Parameter, die nicht den gleichen Inhalt enthalten wie dieselben Parameter in [global] (default).<br />
1 # alle Parameter<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional}}<br />
<br />
Über das Webinterface können in bestimmtem Unfang Konfigurations-Dateien editiert und gesichert werden. Das ist für den Server-Admin, der sich nicht immer in der Nähe zur Konsole des Servers befindet, sehr vorteilhaft. Wenn aber weitere User oder andere Beteiligte ebenfalls Zugang zum Webinterface und damit Zugriff auf die Daten haben, kann das zu einem Problem werden. Die Möglichkeit des Editierens (Schreibens) kann daher mit diesem Parameter ausgeschaltet werden.<br />
httpreadonly = 1 # nur Lesezugriff möglich<br />
= 0 # alles ist möglich (default)<br />
<br />
<br />
==== httpiconpath ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9463/01/28/2014</span><br />
<br />
httpiconpath = path<br />
<br />
Pfad zur Picon-Datei, default [blank] none<br />
<br />
<br />
==== httphelplang ====<br />
{{Mandatory}}<br />
httphelplang = de|en|fr|it<br />
<br />
Auswahl der Sprache für die Kontexte<br />
<br />
de = deutsch<br />
en = englisch<br />
fr = französisch<br />
it = italienisch<br />
[blank] = englisch (default)<br />
<br />
<br />
==== httposcamlabel ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
Setzt ein individuelles label für den header des Webinterfaces, default: OSCam rXXXX<br />
<br />
<br />
=== '''Cache''' ===<br />
{{OSCamConfCacheParameter}}<br />
<br />
<br />
==== delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
<br />
==== max_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
max_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clientanfrage im Cache verbleiben. Die Zeit muß 3,5 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
==== max_hit_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8910:09/10/2013</span><br />
<br />
max_hit_time = in Sekunden<br />
<br />
Maximale Zeit, die Treffer für cache exchange im cache verbleiben müssen um wait_time zu evaluieren, default: 15<br />
<br />
<br />
==== wait_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Wartezeit und Dynamische Wartezeit in Millisekunden für cache exchange und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
<br />
= [blank] none (default)<br />
<br />
'''Info:'''<br />
awtime --> Zeit die bei jeder Anfrage gewartet wird (always wait time)<br />
dwtime --> Zeit die bei positivem Fund eines CWs im Cache gewartet wird (dynamic wait time)<br />
<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
<br />
Verwendungspraxis:<br />
wait_time = 098C:5:130,09C4:5:130,1702:5:1900,1830:5:490,1843:5:490,0D05:5,0B00:5<br />
<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional}}<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode (bestimmt die Verwenung des Parameters ''counter'')<br />
<br />
0 = Falls ''wait_time'' abgelaufen ist, sende das CW mit dem höchsten counter an die clients<br />
1 = Niemals ein CW (von cacheex) aus dem cache versenden, wenn der counter aus dem cacheex den in diesem Parameter <br />
gesetzten counter nicht erreicht. Falls ''wait_time'' erreicht ist, geht der request an normale reader. <br />
Nur wenn ein CW den gesetzten counter erreicht, wird es an die clients gesendet.<br />
Default = 0<br />
<br />
<br />
* counter (bestimmt den counter des CW, der mindestens erreicht werden muss, um versendet zu werden)<br />
<br />
Default = 1 (benutze das CW mit dem höchsten counter aus dem cache)<br />
<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = erlaube bad cw's von einem festgelegten fallback reader. Default = 0<br />
<br />
<br />
'''Info:'''<br />
<br />
Bei '''aktiviertem''' Parameter wird bei einem bad CW die Anfrage an den fixed Fallback weitergeleitet<br />
und somit ein freetzer meist verhindert.<br />
<br />
<br />
Siehe --> [[OSCam/de/Config/oscam.server#fallback|fallback]]<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== csp_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von CSP-Nodes hört<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Lokale Bind-IP für csp_port (siehe oben)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 ausgeschaltet (default)<br />
= 1 eingeschaltet<br />
<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Für NDS Karten nur in einer light Version verfügbar''' <br />
<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID, für die der CW-Cycle-Check ermöglicht werden soll, [blank] = kein Check (Default)<br />
<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = Zahl<br />
<br />
Maximum von CW-Cycle-Entries in die Liste, default = 500, maximum = 4000<br />
<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = Minuten<br />
<br />
Minimalzeit, die ein erkannter Cycle in der Memory verbleiben soll, default = 15, maximum = 240<br />
<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = ungültige CW-Cycle kommen nur ins Log <br />
1 = ungültige CW-Cycle werden gedropped (default)<br />
<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, 1 = alte CW-Cycle werden gedropped, 0 = kein Dropping (default)<br />
<br />
<br />
==== cwcycle_sensitive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (oder mehr) gleiche bytes und drop neues CW<br />
3 = 3 (oder mehr) gleiche bytes und drop neues CW<br />
4 = 4 (oder mehr) gleiche bytes und drop neues CW<br />
<br />
--> Höherer Wert entspricht höherer Empfindlichkeit<br />
<br />
<br />
==== cwcycle_usecwcfromce ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = benutze CW Info aus cache exchange<br />
0 = default<br />
<br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
antworte, wenn das cache exchange timeout erreicht ist und keine normalen Reader zur Verfügung stehen, die ECM's senden:<br />
<br />
0 = sende sofort '''not found''' an den client (default)<br />
1 = warte auf eine Antwort für cache exchange bis der timeout für den client erreicht ist<br />
<br />
<br />
=== '''csp (UDP''') ===<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:02/16/2013 Siehe Section '''[cache]'''!</span><br />
<br />
Abschnitt nur dann erforderlich, wenn csp als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von csp-nodes hört<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
Local Bind IP für den oben genannten UDP-Port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== wait_time ====<br />
{{Mandatory}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET Siehe Section '''[cache]'''!</span><br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8060:01/04/13</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8077:01/06/13</span><br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
= [blank] none (default)<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
Wartezeit in Millisekunden für cache exchange ('''nur mode 2&3''') und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
=== '''Camd 33 (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn camd33 als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd 33 Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein Adressbereich, der unverschlüsselt übertragen wird.<br />
<br />
Beispiel:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt =<br />
<br />
<br />
==== passive ====<br />
{{Optional}}<br />
Definition für aktiven oder passiven Client. Generell geht das Camd3.3x-Protokoll von einem aktiven Client aus. Es kann aber unter bestimmten Umständen bei manchen Clients (meistens plugin) zur Schwierigkeiten kommen. In diesem Fall<br />
<br />
Beispiel:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
<br />
==== key ====<br />
{{Optional}}<br />
<br />
Schlüssel, der für die Verschlüsselung verwendet wird. (128bit Verschlüsselung)<br />
<br />
Beispiel:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key =<br />
<br />
<br />
=== '''cs357x (UDP)''' ===<br />
Abschnitt nur dann erforderlich, wenn cs357x als Client Protokoll verwendet wird.<br />
Dieses Protokoll verschlüsselt grundsätzlich und bildet den Schlüssel aus dem Benutzernamen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:'''<br />
'''cs357x''' wurde auch als '''camd35''' bezeichnet. Beide Bezeichnungen meinen das gleiche Protokoll mit den gleichen Funktionsweisen und Parametern. Künftig wird zur Vermeidung von Irritationen '''nur noch cs357x''' verwendet.<br />
<br />
Eine genauere Erklärung für UDP findet Ihr hier [http://de.wikipedia.org/wiki/User_Datagram_Protocol]<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus cs357x Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs357x -clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Tread]]<br />
<br />
<br />
=== '''cs378x''' (TCP) ===<br />
Abschnitt nur dann erforderlich, wenn cs378x als Client Protokoll notwendig ist.<br />
<br />
Eine ausführliche Erklärung von TCP findet Ihr hier [http://de.wikipedia.org/wiki/Transmission_Control_Protocol]<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein das OSCam nur antwortet wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs3.78x-clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
<br />
=== '''Newcamd (TCP)''' ===<br />
Abschnitt nur dann erforgerlich, wenn newcamd als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
<br />
==== key ====<br />
{{Mandatory}}<br />
Schlüssel für die Newcamd Verbindung zum Client.<br />
<br />
Beispiel:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Newcamd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000@1234:000000 # (CAID 1234 ist über Port 15000 erreichbar)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 ist über Port 15000 erreichbar CAID 5678 über Port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Hat der Server mehrere IP Adressen werden nur Anfragen die an die konfigurierte IP gehen beantwortet.<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein bestimmter IP Bereich der sich auf den Newcamd Server verbinden darf.<br />
<br />
Beispiel:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed =<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
Der Server versucht, die Newcamd Verbindung am leben zu halten.<br />
<br />
Beispiel:<br />
keepalive = 1 # (aktiviert)<br />
keepalive = 0 # (deaktiviert)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
<br />
==== mgclient ====<br />
{{Optional}}<br />
Aktiviert das Extendet Newcamd Protokol, um mehrer CAID's über einen Port zu schicken<br />
<br />
Beispiel:<br />
mgclient = 1 # (aktiviert)<br />
mgclient = 0 # (deaktiviert)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br />
=== '''scam''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9878:09/29/2014</span><br />
<br />
Abschnitt nur dann erforderlich, wenn scam als Client-Protocol verwendet wird.<br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
port = port<br />
<br />
UDP-Port für scam server, default = 0<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
=== '''Radegast''' ===<br />
Abschnitt nur dann erforderlich, wenn Radegast als Client-Protokoll notwendig ist.<br />
<br />
{{OSCamConfRadegastParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
TCP/IP-Port für Radegast-Clients. Mit dem Eintrag wird das Radegast-Protokoll enabled.<br />
port =<br />
= 0 (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
<br />
Username des Radegast-Client<br />
user = username<br />
<br />
<br />
=== '''Serial''' ===<br />
Abschnitt nur dann erforderlich, wenn eine serielle Reader-Schnittstelle notwendig ist.<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
<br />
==== device ====<br />
{{Optional}}<br />
<br />
Parameter der Device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = Name der Serial Device<br />
option = timeout = Millisekunden Timeout für die Verbindung default: 50<br />
= delay Millisekunden Zusätzliche Verzögerung zwischen 2 Characters<br />
<br />
Unterstützte Serial Devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
<br />
=== '''Cccam (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn Cccam als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCccamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6206:01/07/2012</span><br />
<br />
TCP/IP-Ports für CCcam-Clients. Mit dem Eintrag eines oder mehrerer Ports wird das CCcam-Protokoll enabled.<br />
<br />
port = 0|port[,port...]<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled<br />
<br />
<br />
==== version ====<br />
{{Optional}}<br />
Definiert die Version von CCcam, mindestens Version 2.0.11, Default-Wert = 0<br />
<nowiki><main version>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
version = 2.0.11<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
==== reshare ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Reshare-Level<br />
-1 = kein Resharing<br />
0 = nur Reshare für Direct-Peer<br />
1 = Reshare für Direct-Peer und den nächsten Level<br />
x = Reshare für Direct-Peer und die nächsten x Level (x steht für die Zahl der Level)<br />
<br />
Beispiel<br />
reshare = 1 Reshare nur für Direct-Peer und den nächsten Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
==== reshare_mode ====<br />
{{Optional}}<br />
Arten des reshare:<br />
0 = reader reshared nur empfangene SCs für CCcam-reader<br />
1 = reader reshared empfangene SCs (wie=0) und definierte services<br />
2 = reader reshared nur definierte reader-services als virtueller SC<br />
3 = reader reshared nur definierte user-services als virtueller SC<br />
<br />
<br />
==== ignorereshare ====<br />
{{Optional}}<br />
CCcam Reshare-Einstellungen<br />
0 = benutze die Reshare-Einstellungen des Servers (default)<br />
1 = benutze die Reshare-Einstellungen des Readers oder Users<br />
<br />
Beispiel<br />
ignorereshare = 1 Die Reshare-Einstellungen des Readers oder Users werden benutzt<br />
<br />
<br />
==== stealth ====<br />
{{Optional}}<br />
Versteckt aktive user und das extended OSCam-Protokoll. Schützt andere OSCam-user davor, den Server als OSCam-Server zu entdecken!<br />
stealth = 1 # Tarnung eingeschaltet<br />
= 0 # Tarnung aus (default)<br />
<br />
<br />
==== minimizecards ====<br />
{{Optional}}<br />
Modus der Verbindung von CCcam-Servern zu CCcam-Clienten<br />
0 = Keine Aggregation, nur Duplikate werden entfernt (default)<br />
1 = Basierend auf Minimum-Hop: zwei SC's mit unterschiedlichen hops werden zusammengefasst, neue SC's bekommen einen kleineren hop<br />
2 = Aggregation auf CAIDs basierend: alle SC's mit der gleichen CAID werden zusammengefasst, Provider wird entfernt<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional}}<br />
Interval in Sekunden zur Verteilung der share list updates an die Clienten.<br />
<br />
0 = Update basiert auf Server-Updates, Werte kleiner als 10 sind ungültig und werden auf 30 gesetzt.<br />
= [blank) 240 (default)<br />
<br />
<br />
==== keepconnected ====<br />
{{Optional}}<br />
CCcam Keepalive-Modus:<br />
0 = Trenne Client, wenn die maximale Leerlaufzeit (idletime) erreicht ist<br />
1 = Halte die Verbindung (default)<br />
<br />
<br />
==== recv_timeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7672:10/09/2012</span><br />
<br />
recv_timeout = Millisekunden<br />
<br />
hier kann ein network-timeout beim Empfang von Daten gesetzt werden<br />
default = 2000<br />
<br />
<br />
==== forward_origin_card ====<br />
{{Optional}}<br />
forward_origin_card = 0|1<br />
<br />
Weiterleitung des ECM-Requests an den reader, der diese Karte hat.<br /><br />
Loadbalancer und Caching werden dabei deaktiviert.<br />
<br />
1 = Weiterleitung eingeschaltet<br />
0 = Aus (default)<br />
<br />
<br />
==== nodeid ====<br />
{{Optional}}<br />
nodeid = ID<br />
<br />
setzt CCcam node ID in '''hex''', <br />
<br />
default:none<br />
<br />
Beispiel:<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br />
Wenn eine nodeid benutzt wird, dann wechselt der Server das Protokol von "cccam ext" zu "cccam".<br />
<br />
<br />
=== '''Pandora''' ===<br />
{{OSCamConfPandoraParameter}}<br />
==== pand_skip_send_dw ====<br />
pand_skip_send_dw = dummy<br />
<br />
==== pand_allowed ====<br />
pand_allowed = dummy<br />
<br />
==== pand_usr ====<br />
pand_user = dummy<br />
<br />
==== pand_pass ====<br />
pand_pass = dummy<br />
<br />
==== pand_ecm ====<br />
pand_ecm = dummy<br />
<br />
==== pand_port ====<br />
pand_port = dummy<br />
<br />
==== pand_srvid ====<br />
pand_srvid = dummy<br />
<br />
<br />
=== '''GBox''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
{{OScamConfGboxParameter}}<br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBox läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
==== hostname ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
hostname = eigene IP oder hostname<br />
<br />
<br />
===== my_password =====<br />
{{Mandatory}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
Passwort = 4 hex bytes, 8 chara<br />
<br />
Mein Passwort<br />
<br />
Beispiel<br />
98AF3E25<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
port = port[,port]... udp ports, die die gbox überwacht<br />
<br />
<br />
==== proxy_card ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy_Card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
proxy reader SmartCard(s), die mit gbox network reshared werden, default = none<br />
<br />
<br />
==== ccc_reshare ====<br />
{{Optional}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = cccam Karten können ins gbox Netzwerk transportiert werden , default = 0 (global setting)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Caid der Karten müssen in 'ccc_gbx_caid =' spezifiziert werden<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Der Share Level für jeden peer wird spezifiziert in oscam.server [reader]-> cccam_reshare<br />
<br />
<br/><br />
<br />
==== ccc_gbx_caid ====<br />
{{Optional}}<br />
<br />
ccc_gbx_caid = caid_1,caid_2,...<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' 'ccc_reshare' muß zusätzlich gesetzt werden<br />
<br />
<br/><br />
<br />
==== my_vers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9645:04/09/2014</span><br />
<br />
my_vers = version<br />
<br />
hier kann das low byte (hex) der eigenen gbox version gesetzt werden<br />
<br />
default = 2A<br />
<br />
==== my_cpu_api ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9712:05/11/2014</span><br />
<br />
my-cpu_api = byte<br />
<br />
Setze CPU und API Byte in hexadecimal<br />
default = 40<br />
<br />
<br />
==== gbox_reconnect ====<br />
{{Optional}}<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min=60, max=300<br />
<br />
==== gsms_disable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9714:05/11/2014</span><br />
<br />
gsms_disable = 0|1<br />
<br />
schaltet gbox short message service (GSMS) aus, <br />
default = 1<br />
<br />
==== tmp_dir ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/2014</span><br />
<br />
tmp_dir = path<br />
<br />
tempory directory für gbox<br />
<br />
default = /tmp/.oscam<br />
<br />
=== '''DVBapi''' ===<br />
{{Optional}}<br />
Abschnitt nur dann erforderlich, wenn OScam auch als Client zum entschlüsseln eingesetzt werden soll.<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional}}<br />
DVBapi zum lokalen Entschlüsseln verwenden<br />
<br />
Beispiel:<br />
enabled = 0 # (deaktiviert)<br />
enabled = 1 # (aktiviert)<br />
<br />
Default:<br />
enabled = 0<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
Hier wird der User festgelegt, dieser sollte in der oscam.user angelegt sein.<br />
<br />
Beispiel:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
<br />
==== au ====<br />
{{Optional}}<br />
Autoupdate für DVB API aktivieren/deaktivieren.<br />
Abhängig vom verwendeten User aus der oscam.user und dessen au Einstellungen.<br />
<br />
Beispiel:<br />
au = 0 # AU deaktiviert (default)<br />
au = 1 # AU aktiviert<br />
<br />
<br />
==== pmt_mode ====<br />
{{Optional}}<br />
Beispiel:<br />
pmt_mode = 0 # (verwendet camd.socket und PMT Datei)<br />
pmt_mode = 1 # (deaktiviert PMT Datei)<br />
pmt_mode = 2 # (deaktiviert camd.socket)<br />
pmt_mode = 3 # (liest PMT nur beim Start ein)<br />
pmt_mode = 4 # (do not use signal handler for monitoring /tmp)<br />
pmt_mode = 5 # (do not use signal handler for monitoring /tmp & disable camd.socket)<br />
<br />
Default:<br />
pmt_mode = 0<br />
<br />
<br />
==== request_mode ====<br />
{{Optional}}<br />
CAID request mode: <br />
<br />
Beispiel:<br />
request_mode = 0 # versuche alle möglichen CAIDs nacheinander (default) <br />
request_mode = 1 # versuche alle CAIDs simultan<br />
<br />
<br />
==== listen_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP IP port für SAT IP clients. Die Filterung muss auf der Client-Seite erfolgen!<br />
<br />
0 = disabled (default)<br />
<br />
<br />
==== boxtype ====<br />
{{Mandatory}}<br />
Verwendete Box auf der DVB API aktiviert wurde.<br />
<br />
Beispiel:<br />
boxtype = ufs910<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt||qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
Hinweis:<br />
pc steht für generic pc support (laufend supported bei VDR mit vdr-plugin-dvbapi)<br />
<br /><br />
<br />
==== cw_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
cw_delay = in Millisekunden<br />
<br />
Delay beim Schreiben des CW. default = [blank] kein Delay<br />
<br />
<br />
==== delayer ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6808:05/14/2012</span><br />
<br />
delayer = Millisekunden<br />
<br />
Minimum der Zeit, um CW zu schreiben. default: 0<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
<br />
Öffnet die demux-device nach jedem Kanalwechsel neu, default = 0<br />
<br />
<br />
==== decodeforever ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = versuche dauernd auf allen CAIDs zu decodieren<br />
0 = default<br />
<br />
<br />
==== ecminfo_type ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10722:06/13/2015</span><br />
<br /><br />
Definiert die Syntax der Ausgabe in die ecm.info . <br />
<br />
ecminfo_type = 0|1|2|3|4|5 <br />
<br />
Die möglichen Werte bedeuten:<br /><br />
0 - normale oscam syntax<br />
1 - normale oscam syntax, aber die ECMTime wird in Millisekunden anstatt Sekunden angezeigt<br />
2 - wicardd (*1)<br />
3 - mgcamd<br />
4 - cccam<br />
5 - camd3<br />
<br />
(*1)Beispiel:<br /><br />
system: Nagra<br /><br />
caid: 0x1830<br /><br />
pid: 0x1CCE<br /><br />
prov: 000000<br /><br />
cw0: FF A3 7F F1 B8 29 E7 C8<br /><br />
cw1: CB E1 A3 D3 EF FE EF C0<br /><br />
Signature OK<br /><br />
source: ServerXY (cs378x at server:12345)<br /><br />
418 msec -- Sun Jun 14 18:55:37 2015<br /><br />
<br /><br />
<br />
==== read_sdt ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10766:06/15/15</span><br />
<br />
Durch diese Option kann Oscam (mittels Dvbapi) automatisch Kanalname und Providername in die oscam.srvid bzw oscam.srvid2 sowie oscam.provid eintragen. Dazu muss man mindestens 30 Sekunden auf einem Kanal verweilen. Dabei werden allerdings nur noch nicht vorhandene Namen hinzugefügt, bereits vorhandene Einträge in den Dateien werden nicht verändert. So behält man die volle Kontrolle über den Inhalt der Dateien.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = ausgeschaltet (default)<br />
1 = eingeschaltet, aber FTA-Kanäle nicht verarbeiten<br />
2 = eingeschaltet, auch FTA-Kanäle verarbeiten<br />
<br />
==== write_sdt_prov ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10841:06/27/15</span><br />
<br />
Mit dieser Option kann man einstellen, ob die Providernamen zusätzlich in die oscam.srvid bzw oscam.srvid2 eingetragen werden sollen. Dies ist nicht unbedingt erforderlich, weil der Providername automatisch aus der oscam.provid ausgelesen wird. Für diese Option ist das Einschalten von read_sdt erforderlich.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = ausgeschaltet, Providernamen nicht in die oscam.srvid bzw oscam.srvid2 eintragen (default)<br />
1 = eingeschaltet, Providernamen eintragen<br />
<br />
=== '''Anticasc''' ===<br />
Abschnitt nur dann erforderlich, wenn Anticascading als Schutz vor unbefugtem Weiterreichen von Cardsharing angewendet werden soll.<br />
<br />
{{OSCamConfAnticascParameter}}<br />
<br />
<br />
==== enabled ====<br />
{{Mandatory}}<br />
Hiermit wird Anticascading eingeschaltet.<br />
enabled = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== numusers ====<br />
{{Optional}}<br />
Zahl der User, die je Account zugelassen sind.<br />
numusers = 1 # Es ist ein User je Account zugelassen<br />
= 0 # Anticascading ausgeschaltet (default)<br />
<br />
<br />
==== sampletime ====<br />
{{Optional}}<br />
Zeit in Minuten für das Sammeln der Anfragen<br />
sampletime = 5 # Zeitraum von 5 Minuten<br />
= # [blank] Default-Wert 2 Minuten<br />
<br />
<br />
==== samples ====<br />
{{Optional}}<br />
Zahl der Anfragen über dem Limit (mögliche Werte zwischen 2 und 10)<br />
samples = 7 # Limit bei 7 Anfragen<br />
= # [blank] Default-Wert 10 Anfragen<br />
<br />
<br />
==== penalty ====<br />
{{Optional}}<br />
Strafe für den Sünder<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
<br />
Die Strafe kann in der oscam.user überschrieben werden! <br />
<br />
'''Hinweis:''' Fake-CW`s schaden nicht nur demjenigen, dem sie schaden sollen, sondern allen anderen im Share, denn weder oscam noch cccam kann Fake-CW`s von realen CW`s unterscheiden. Wenn also ein Sharepartner von uns ein Fake-CW bekommt und der es dann für 7 Sekunden im cache hat, kann das durch cache2-Hits unbegrenzt an weitere Sharepartner gehen, auch trotz Einstellung von cccmaxhops = 0. Es haben dann unzählige User plötzlich für 7 Sekunden einen Freezer und keiner weiss, warum. Man schadet so also unbewusst allen Sharepartnern, auch denen, mit denen man nicht direkt shart!<br />
<br />
Beispiel<br />
penalty = 3 # Sende korrekte CWs zeitversetzt<br />
<br />
<br />
==== aclogfile ====<br />
{{Optional}}<br />
Dateiname für das AC-Log<br />
aclogfile =<br />
= # [blank] Kein Logfile (default)<br />
<br />
<br />
==== fakedelay ====<br />
{{Optional}}<br />
Fake-Verzögerung in Millisekunden (mögliche Werte zwischen 100 und 3000)<br />
<br />
Beispiel<br />
fakedelay = 500 # Verzögerung von 500 Millisekunden<br />
= # [blank] Default-Wert 1000 Millisekunden<br />
<br />
<br />
==== denysamples ====<br />
{{Optional}}<br />
Wieviel Samples sollen bestraft werden?<br />
<br />
Beispiel<br />
denysamples = 10 # Ab 10 Samples wird bestraft<br />
= # [blank] Default-Wert 8 Samples<br />
<br />
==== acosc_enabled ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
'''Vorbemerkung:'''<br />
mit den nachfolgenden acosc-Parametern wir ein Anticascading über das Zählen der SIDs ('''a'''nticascading '''o'''ver '''s'''id '''c'''ount) ermöglicht.<br />
<br />
acosc_enabled = 0|1<br />
1 = ermöglicht anticascading over SIDs count<br />
0 = default<br />
<br />
<br />
==== acosc_max_active_sids ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = Anzahl<br />
<br />
Maximum aktiver SIDs bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden!<br />
<br />
<br />
==== acosc_zap_limit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = Anzahl<br />
<br />
Zap-Limit bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
Strafe für den Sünder bei Anticascading over SIDs count:<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = Sekunden<br />
<br />
Dauer der Strafe bei Anticascading over SIDs count:<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
==== acosc_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_delay = Millisekunden<br />
<br />
Verzögerung bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.conf&diff=13529
OSCam/de/Config/oscam.conf
2020-02-24T17:23:34Z
<p>Felixka: /* GBox */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.conf''' ==<br />
Dies ist die Hauptkonfigurationsdatei für OSCam. Sie enhält globale Parameter z.B. für das Debuggen, Loggen und den Loadbalancer, sowie einzelne Sektionen für Sondereffekte wie z.B. den Monitor, das Web-Interface, die Protokolle, das DVBapi und das Anti-Cascading. Nur die Sektion [global] ist Pflichtbestandteil, alle übrigen Sektionen sind optional (also nur bei Bedarf) zu verwenden.<br />
<br />
<br />
=== '''Globale Parameter''' ===<br />
Folgende Parameter gibt es im [global] Abschnitt:<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Ist ein Parameter leer oder wird er nicht im Konfigurationsfile angeführt dann gelten die Default-Werte!<br />
<br />
<br />
==== nice ====<br />
{{Optional}}<br />
'''Systempriorität'''. OSCam benötigt fast keine CPU-Leistung. Wenn aber CPU-Leistung benötigt wird, sollte diese sofort zur Verfügung stehen. Werte von 20 bis -20 sind möglich, wobei 20 gering und -20 sehr hoch ist. Wird der Parameter auskommentiert(#), wird diese Funktion nicht ausgerufen. Das ist wichtig z.B. für die dbox 2[http://de.wikipedia.org/wiki/DBOX2], wenn die Fehlermeldung "''relocation error:setpriority''" erscheint. Vgl. [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Beispiel:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
<br />
===== pidfile =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8176/01/24/2013</span><br />
<br />
pidfile = filename, <br />
<br />
ändere den Namen für das pidfile und den Speicherort,<br />
mit [blank] none (default)erfolgt die Speicherung als oscam.pid in /tmp<br />
<br />
Beispiel:<br />
pidfile = /var/run/oscam.pid<br />
<br />
<br />
===== logfile =====<br />
{{Optional}}<br />
Mit diesem Parameter wird Name und Pfad und für das Logfile (mehrere sind nicht möglich) festgelegt, zusätzlich auch das Loggen in stdout oder syslog. Es ist auch möglich, das Loggen nur für stdout oder syslog festzulegen und somit keine Logdatei zu schreiben.<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
Möglichkeiten:<br />
logfile = /var/log/oscam.log # Datei oder Linuxdevice (z.B. /dev/tty)<br />
logfile = syslog # Die Ausgabe wird an den syslogd übergeben<br />
logfile = stdout # Bildschirmausgabe<br />
<br />
Beispiel:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format des logfile:<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timed out<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
<br />
===== ecmfmt =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8056:01/03/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
definiert ECM log format, default:c@p/i/s/l:h:Y:t <br />
<br />
mögliche Variablen: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and cccam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , diese ID wird durch die Tierbeschreibung aus der oscam.tiers (falls vorhanden) ersetzt<br />
w = CW<br />
y = Payload (kurz, 3 Bytes)<br />
Y = Payload (lang, 6 Bytes)<br />
<br />
benutze einen Wert als Prefix, um eine Variable mit diesem Wert zu verbergen<br />
<br />
Beispiel:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w <br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn10048:11/30/13/2013</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs werden eingefügt, wenn CWs nicht ein ungleiches oder gleiches Muster haben (default)<br />
1 = disabled<br />
<br />
<br />
===== loghistorysize =====<br />
{{Optional}}<br />
loghistorysize = bytes<br />
<br />
Größe der Log-Messages-History im WebIf oder Monitor in Bytes<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) # ist nur wirksam, wenn '''preferlocalcards = 1''' in der [global] section gesetzt ist, sonst unter stage 3!<br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
Beispiel:<br />
<br />
P/2/2/2 oder L/2/4/4<br />
<br />
<br />
===== maxlogsize =====<br />
{{Mandatory}}<br />
<br />
Hier kann die maximale Größe des Logfiles in KBytes festgelegt werde. Das ist besonders wichtig für Server mit nur geringem Speicherumfang (z.B. auf dbox2). Darum wird dringend empfohlen, bei solchen Servern diese Größe sorgfältig zu bestimmen. Nicht selten "platzt" ein System, weil die Logfiles unkontrolliert riesige Ausmaße angenommen haben!<br />
<br />
Beispiel<br />
maxlogsize = 20 # Logfile geht bis zu 20 KBytes<br />
= 0 # Logfile erhält '''unbegrenzte''' Größe<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile geht bis zu 10 KBytes (default)<br />
<br />
<br />
===== logduplicatelines =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8290/02/05/2013</span> <br />
<br />
logduplicatelines = 0|1<br />
<br />
= 1 schaltet das Schreiben von Duplikatzeilen im Logfile aus<br />
= 0 schaltet das Schreiben von Duplikatzeilen im Logfile ein = default<br />
<br />
<br />
===== disablelog =====<br />
{{Optional}}<br />
Schaltet Logfile<br />
1 = Ausschalter ein, also '''kein''' Log - puh ;-) -<br />
0 = Ausschalter aus, also '''ein''' Log<br />
<br />
Beispiel:<br />
disablelog = 1 # es wird '''kein''' Log erstellt<br />
<br />
Default:<br />
disablelog = 0 # es wird '''ein''' Log erstellt<br />
<br />
<br />
===== cwlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für CW-Logging eingestellt werden. Der Pfad ist relativ zum Workdirectory und muss existieren, sonst werden keine Logs erstellt und auch keine Fehler ausgegeben.<br />
<br />
CWs (control words) sind die Antworten der Karte mit der ein bestimmter Sender für einige Sekunden freigeschaltet wird bevor das nächste cw übertragen wird. Die cw Logdatei kann dazu verwendet werden, den Sender zeitversetzt zu entschlüsseln. Das wird auch "Offline Decoding" genannt. Siehe [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
OScam erstellt für jeden Sender und jeden Tag eine neue *.cwl Datei mit Datum, Service-ID und Sendername, z.B. 110808_I000B_Sky_Cinema_+1.cwl mit diesem Inhalt:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
Wenn mindestens ein User diesen Sender schaut, werden alle notwendigen CWs gespeichert.<br />
Bitte einen Speicherort mit genügend Platz angeben, da pro Tag und Sender einge 10KB an Daten anfallen. Empfehlenswert ist ein Skript, das die logfiles regelmässig verschiebt/löscht.<br />
<br />
Beispiel:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] kein Pfad für CW-Log, Logging abgeschaltet<br />
<br />
<br />
===== emmlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für EMM-Logging eingestellt werden. Welche EMMs mitgeloggt werden sollen, kann mit den "saveemm-*"-Parametern in der oscam.server detailliert eingestellt werden.<br />
<br />
Beispiel:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] Es wird der Config-Ordner verwendet<br />
<br />
<br />
===== usrfile =====<br />
{{Optional}}<br />
Festlegung des Namens eines Files für user logging.<br />
<br />
Das user logging file hat folgendes Format<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Beispiel:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
<br />
===== disableuserfile =====<br />
{{Optional}}<br />
Jetzt wird es ganz wild: Auch wenn ein Logfile eingeschaltet ist (siehe logfile) kann hier das userfile ausgeschaltet werden.<br />
<br />
Beispiel:<br />
disableuserfile = 1 # es wird '''kein''' userfile erzeugt<br />
= 0 # es wird '''ein''' userfile erzeugt<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
<br />
===== usrfileflag =====<br />
{{Optional}}<br />
Einstellung des Logging-Modus<br />
0 = Es wird nur das Ein- und Ausloggen des Clients im Userfile geloggt<br />
1 = Jedes Zappen eines Clients wird im Userfile geloggt<br />
Default-Wert ist 0<br />
<br />
Beispiel:<br />
usrfileflag = 1 # Alles wird geloggt<br />
<br />
Default:<br />
usrfileflag = 0 # Nur Login und Logout wird geloggt<br />
<br />
<br />
===== saveinithistory =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn7128;07/02/2012</span><br />
<br />
Sicherung der Reader-Init-History. Wird benötigt, um die Entitlements anzuzeigen.<br />
<br />
Beispiel:<br />
saveinithistory = 1 # Sicherung nach /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # Keine Sicherung<br />
<br />
<br />
===== disablemail =====<br />
{{Optional}}<br />
disablemail = 0|1<br />
<br />
Schaltet das Speichern von NDS Videoguard MailMessages des Providers aus. Default: 1 (disabled)<br />
<br />
<br />
===== mailfile =====<br />
{{Optional}}<br />
mailfile = file<br />
<br />
Legt das File fest, in dem NDS Videoguard MailMessages des Providers gespeichert werden sollen.<br />
<br />
Default: [blank] kein File.<br />
<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
Delay in Millisekunden für eine Anfrage an cache exchange mode 1 reader, default: kein delay<br />
<br />
<br />
==== reader ====<br />
===== enableled =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
<br />
===== serialreadertimeout =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8541:03/13/2013</span><br />
<br />
'''Nur wenn Serialreader benutzt wird'''<br />
Timeout in Millisekunden für Serialreader<br />
<br />
Beispiel:<br />
serialreadertimeout = 1200 # Timeout nach 1200 Millisekunden<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout nach 1500 Millisekunden<br />
<br />
<br />
===== waitforcards =====<br />
{{Optional}}<br />
Hier kann festgelegt werden, ob OSCam beim Start des Programms auf lokale Karten wartet, bevor die Netzwerkports geöffnet werden.<br />
<br />
Beispiel:<br />
waitforcards = 0 # Nicht Warten<br />
<br />
Default:<br />
waitforcards = 1 # Warten<br />
<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional}}<br />
waitforcards_extra_delay = Millisekunden<br />
<br />
Zusätzliche Verzögerung in Millisekunden nach Warten auf lokale SCs während des Starts vor dem Öffnen von Netzwerk-Ports<br />
<br />
default = 500<br />
<br />
<br />
===== preferlocalcards =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9605:03/29/2014</span><br />
<br />
Der Parameter legt fest, welche Quelle zuerst für die Dekodierung verwendet werden sollen.<br />
<br />
Beispiel:<br />
preferlocalcards = 0 # lokale Karten werden wie remote Reader behandelt<br />
<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
preferlocalcards = 2 # Lokale Karten werden dem CacheEX vorgezogen<br />
<br />
Default:<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
<br />
===== readerrestartseconds =====<br />
{{Optional}}<br />
Festlegung einer Wartezeit in Sekunden zwischen Restarts von Readern.<br />
<br />
Beispiel:<br />
readerrestartseconds = 10 # Wartezeit 10 Sekunden<br />
= 0 # '''keine Readerrestarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # Wartezeit 5 Sekunden<br />
<br />
<br />
===== block_same_ip =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_ip = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit derselben IP-Addresse zurück, default = 1<br />
0 = nicht zurückweisen<br />
<br />
<br />
===== block_same_name =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_name = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit demselben Namen zurück, default = 1<br />
0 = Nicht zurückweisen<br />
<br />
<br />
==== cache ====<br />
===== cachedelay =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
<br />
===== max_cache_time =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clienten-Anfrage im cache verbleiben. Die zeit muss 2 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
===== max_cache_count =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = Anzahl, default 1000<br />
<br />
Maximale Zahl von CWs im cache<br />
<br />
<br />
===== cacheexwaittime =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
Maximale Wartezeit für einen Cache-Zugriff in Millisekunden für cacheex = 1 Reader.<br />
50 Millisekunden = default<br />
<br />
<br />
===== cacheexenablestats =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== client ====<br />
===== clienttimeout =====<br />
{{Optional}}<br />
<br />
Maximale Zeit in Millisekunden, bevor ein Client ein Timeout erhält.<br />
<br />
Beispiele:<br />
clienttimeout = 10000 # nach 10 Sekunden erfolgt ein Timeout<br />
clienttimeout = 10 # hier erfolgt aber ein Timeout bereits nach 10 Millisekunden, s. Hinweis unten!<br />
clienttimeout = 8 # der Timeout erfolgt nach 8000 Millisekunden (= 8 Sekunden), s. Hinweis<br />
Default:<br />
clienttimeout = 5000 # nach 5000 ms (=5 Sekunden) erfolgt ein Timeout<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bei Werten < 10 (also 1 bis 9) werden diese mit Eintausend multipliziert, aus "5" wird also 5000 ms. Eine eingetragene "10" bleibt aber bei zehn Millisekunden!<br />
<br />
===== clientmaxidle =====<br />
{{Optional}}<br />
Begrenzt die Leerlaufzeit eines Clienten in '''Sekunden''' bevor er vom Traffic getrennt wird.<br />
<br />
Beispiel:<br />
clientmaxidle = 200 # Trennung nach 200 Sekunden<br />
= 0 # Begrenzung ist ausgeschaltet, keine Trennung vom Traffic beim Leerlauf!<br />
<br />
Default:<br />
clientmaxidle = 120 # Trennung nach 120 Sekunden<br />
<br />
<br />
===== suppresscmd08 =====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
suppresscmd08 = 0 # Mitteilung an Clienten mit den Protokollen camd 3.5x, 3.57x und 3.78x, keine neuen Anfragen wegen <br />
zurückgewiesener Kombination aus CAID, SID und Provider-ID zu schicken (default)<br />
= 1 # Anfragen sollen weiterhin geschickt werden<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
<br />
==== fallbacktimeout ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Bei mehreren Readern (Siehe Abschnitt [reader] in oscam.server) kann ein Reader bestimmt werden, auf den z.B. bei einer Störung der übrigen Reader der traffic zurück fällt.<br />
<br />
Maximale Wartezeit des [[Cardserver]]s in Millisekunden auf primäre [[Reader]], bevor der/die [[Fallback]]-Reader (falls vorhanden!) befragt werden.<br />
<br />
Beispiel:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Der Wert muss größer dem Wert von "serialreadertimeout" gewählt werden, ansonsten werden die Standardwerte verwendet.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = Millisekunden<br />
<br />
Wartezeit in Millisekunden, bevor der für eine CAID reservierte [[Reader]] befragt wird.<br />
<br />
Default = 2500<br />
<br />
<br />
==== sleep ====<br />
{{Optional}}<br />
Alle User nach "n" Minuten "inaktivieren", wenn diese den Sender nicht innerhalb der eingestellten Zeit wechseln. Diese Einstellung kann auch für jeden User separat vorgenommen werden: [[OSCam/de/Config/oscam.user#sleep]]<br />
<br />
Beispiel:<br />
sleep = 240 # inaktiv nach 4 Stunden<br />
<br />
Default:<br />
sleep = # [blank]<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam hört auf ALLE IP Adressen.<br />
<br />
<br />
==== bindwait ====<br />
{{Optional}}<br />
Maximale Zeit in Sekunden, die der [[Cardreader]] beim Start wartet, bis er den jeweiligen Netzwerk-Port in Zugriff bekommt. Falls der OSCam innerhalb dieser Zeit den Port nicht binden kann, terminiert er mit "Bind Request failed". Ursachen dafür sind<br />
* Doppelbelegung von Ports<br />
* Ein vormals abgestürzter OSCam der die Ports nicht wieder freigegeben hat<br />
* OSCam wurde mehrmals gleichzeitig gestartet<br />
<br />
Beispiel:<br />
bindwait = 20 # Wartezeit 20 Sekunden<br />
<br />
Default:<br />
bindwait = 120 # Wartezeit 120 Sekunden<br />
<br />
<br />
==== netprio ====<br />
{{Optional}}<br />
Hier kann die Priorität des Cardservers im Netzwerk festgelegt werden<br />
<br />
Beispiel:<br />
netprio = 1 # Prioritätsstufe 1<br />
<br />
Default:<br />
netprio = 0 # Systembedingte Priorität<br />
<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional}}<br />
Art der DNS-Auflösung. Dies sind zwei verschiedene libc-Aufrufe für die Namensauflösung, weil einige ältere Systeme Probleme mit der moderneren Implementierung ''getadressinfo'' haben bzw. diese Funktion aus ihren Images gestrippt wurden (zB die alte dBox2). Außerdem ist ''getadressinfo'' threadsafe, während ''gethostbyname'' es nicht ist und deshalb locks drumherum im Code benötigt. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Beispiel:<br />
resolvegethostbyname = 1 # Name wird mittels ''gethostbyname'' aufgelöst<br />
<br />
Default:<br />
resolvegethostbyname = 0 # ''getadressinfo'' wird benutzt<br />
<br />
<br />
====failbancount====<br />
{{Optional}}<br />
Failbancount = Anzahl der erlaubten Fehlversuche mit falschen Zugangsdaten. <br />
= 0 (default) IP wird sofort beim ersten Versuch mit unbekannten Zugangsdaten gesperrt!<br />
<br />
Wenn innerhalb '''failbantime''' mehr als in '''failbancount''' erlaubte Versuche registriert wurden, wird die IP für die restliche failbantime gesperrt. Nach Ablauf von failbantime stehen wieder volle failbancount zur Verfügung. Failbancount ist also eine Lockerung der Regeln<br />
<br />
<br />
==== failbantime ====<br />
{{Optional}}<br />
Zeitspanne in Minuten, für die ein Client mit ungültigem Login-Versuch auf IP-Basis geblockt wird.<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP Adresse wird für 5 Minuten geblockt. Neue Loginversuche werden ignoriert auch wenn das Login OK wäre.<br />
# Es wird kein Clientthread erstellt.<br />
<br />
Default:<br />
failbantime = 0 # failban ist ausgeschaltet (default)<br />
<br />
<br />
==== dropdups ====<br />
{{Optional}}<br />
Möglichkeiten zur Duplizierung von Client-Verbindungen. Es wird damit die Reaktion auf den [[OSCam/de/Config/oscam.user#uniq|uniq]]-Parameter festgelegt.<br />
<br />
0 = Markierung des Clienten als Duplikat aber keine Trennung (default)<br />
1 = Abbrechen der Duplikat-Verbindung anstelle einer Markierung als Duplikat<br />
<br />
<br />
==== unlockparental ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7289:08/27/2012</span><br />
<br />
'''Nur Seca und Viaccess'''<br />
<br />
Option zum Ausschalten der Jugendschutzfunktion für Seca und Viaccess Pin Code Anfragen bei adult movies.<br />
Bei Viaccess z.B. für die Redlight Elite HD Smartcard. Mit unlockparental = 0 bleibt Dorcel Dunkel mit 1 wirds hell!<br />
<br />
Beispiel:<br />
unlockparental = 1 # Jugendschutzfunktion ausgeschaltet<br />
<br />
Default:<br />
unlockparental = 0 # Jugendschutzfunktion von Seca und Viaccess eingeschaltet<br />
<br />
<br />
==== double_check ====<br />
{{Optional}}<br />
'''Nur wenn CW double check ausgewählt ist!'''<br />
<br />
ECM wird zu 2 oder mehr Readern mit der selben SC gesandt und die CW's werden gegeneinander verifiziert. lb_nbes_reader muss auf 2 oder höher gesetzt werden.<br />
<br />
Beispiel:<br />
double_check =<br />
<br />
Default:<br />
double_check = 0<br />
<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|erste 2 digits von CAID1],[CAID2|erste 2 digits von CAID2],... = [blank] keine [default]<br />
<br />
ECM wird an 2 oder mehr Reader mit der gleichen SC gesendet und die CW's werden gegen andere definierte CAIDs oder die ersten 2 bytes der CAIDs verifiziert. lb_nbest_readers muss auf 2 oder höher gesetzt sein!<br />
<br />
<br />
==== Loadbalancer ====<br />
===== lb_mode =====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Wenn hier loadbalancing aktiviert wird, dann sind die in oscam.server bei services stehenden Besonderheiten zu beachten. Siehe [[streamboard:wiki/OSCam/de/Config/oscam.server#services|Services]]!<br />
<br />
Loadbalance Mode<br />
<br />
Wenn man zwei oder mehrere gleiche Karten hat (egal ob lokal oder als Proxie), kann man die Last auf diese Karten gleichmäßig verteilen (balancieren).<br />
<br />
Beispiel:<br />
lb_mode = 0 (deaktiviert) (default)<br />
lb_mode = 1 (schnellster Reader zuerst)<br />
lb_mode = 2 (Reader der am längsten nicht geantwortet hat wird genommen)<br />
lb_mode = 3 (Reader mit der geringsten Auslastung wird verwendet)<br />
lb_mode = 10(LB ist ausgeschaltet, Senderstatistik wird trotzdem erstellt)<br />
<br />
Default:<br />
lb_mode = 0 # deaktiviert<br />
<br />
<br />
===== lb_save =====<br />
{{Optional}}<br />
Speichert die Loadbalance Statistik, damit sie auch nach einem Neustart erhalten bleibt.<br />
Um die CPU nicht zu sehr zu belasten, sollte hier ein Wert > 100 eingetragen werden.<br />
<br />
Beispiel:<br />
lb_save = 100 # Anzahl der ECM's nach der die Statistik gespeichert wird<br />
<br />
Default:<br />
lb_save = 0 # Statistik wird nicht gespeichert<br />
<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional}}<br />
Anzahl der Reader, die für die ECM anfragen.<br />
<br />
Beispiel:<br />
lb_nbest_readers = 2 # Anfragen gehen immer an zwei Reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # Anfrage geht nur an einen Reader<br />
<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional}}<br />
Anzahl der Fallback Reader für den Lastenausgleich.<br />
<br />
Beispiel:<br />
lb_nfb_readers = 2 # Zwei Fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1<br />
<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mod<br />
= 0 # Standardverfahren zum (späten) Wiederöffnen blockierender Reader (default)<br />
= 1 # Schnelles Wiederöffnen blockierender Reader<br />
<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5893:08/19/2011</span><br />
<br />
Anzahl der Reader je CAIDs für das Loadbalancing, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Default:<br />
lb_nbest_percaid = 0<br />
<br />
Beispiel:<br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wird so lange blockiert, bis die Statistik aufgeräumt ist<br />
1 = default<br />
<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = öffne alle gestoppten Reader sofort, wenn kein funktionierender Reader gefunden wird<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional}}<br />
Mindestanzahl der ECM's, die für die Auswertung genommen werden.<br />
<br />
Beispiel:<br />
lb_min_ecmcount =<br />
<br />
Default:<br />
lb_min_ecmcount = 5<br />
<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional}}<br />
Maximale Anzahl der ECM's, bevor der Loadbalancer zurückgesetzt wird.<br />
<br />
Beispiel:<br />
lb_max_ecmcount =<br />
<br />
Default:<br />
lb_max_ecmcount = 500<br />
<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional}}<br />
Zeitspanne in Sekunden zwischen neuem Verbindungsversuch zu verlorengegangenen readern/CAIDs/providers/services<br />
<br />
Beispiel:<br />
lb_reopen_seconds = 500 # Nach 500 Sekunden neuer Verbindungsversuch<br />
<br />
Default:<br />
lb_reopen_seconds = 900<br />
<br />
<br />
===== lb_retrylimit =====<br />
{{Optional}}<br />
Verbindungsversuch zum nächsten reader '''nur wenn''' die Antwortzeit höher, als hier festgelegt in '''Millisekunden'''.<br />
<br />
Beispiel:<br />
lb_retrylimit = 500 # Verbindungsversuch zum nächsten reader nur, wenn die Antwortzeit höher als 500 ms ist.<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
<br />
===== lb_savepath ===== <br />
{{Optional}}<br />
Dateiname für die Sicherung der Loadbalancing Statistiken<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional}}<br />
Zeit in Stunden, nach der die Statistiksätze gelöscht werden sollen<br />
<br />
default = 336<br />
<br />
<br />
===== lb_use_locking =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6166:12/28/2011</span><br />
<br />
Unterdrückt parallele und identische ECM-Anfragen<br />
<br />
1 = ein<br />
0 = aus # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* Man sollte diese Option nur anschalten wenn:<br />
** Langsames system<br />
** Hohe Last<br />
**Gleiche ECM Anfragen nicht aus dem Cache kommen, sondern weiter Reader angefragt werden<br />
<br />
* Vorteile aktiviert:<br />
** Durch die Synchronisierung wird ein ECM Request nach dem anderen durchgeführt, die Ermittlung von Cache oder Request und Zuordnung der Reader über den Loadbalancer ist immer erfolgreich<br />
<br />
* Nachteile aktiviert:<br />
** Die Synchronisierung verhindert Multithreading und es kommt eventuell zu höheren Antwortzeiten<br />
<br />
* Vorteile NICHT aktiviert:<br />
** Schnellere Durchlaufzeiten für ECM requests<br />
<br />
* Nachteile NICHT aktiviert:<br />
** Eventuell doppelte (bzw n-fache) ECM requests an die Reader möglich<br />
<br/><br />
<br />
<br />
===== lb_retrylimits =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,CAID2:time2]...<br />
<br />
Begrenzung der Zeit für einen retry des loadbalancing eines CAID in Millisekunden, wildcard CAIDs mit two-digit CAIDs möglich, <br />
<br />
default: [blank]<br />
<br />
Beispiel:<br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
Ignoriere die Providerinformations-CAIDs, um die statistischen Daten zu reduzieren, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Beispiel:<br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx und 34xx)<br />
<br />
default = [blank]<br />
<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # ermöglicht ein automatisches timeout auf der Basis von Statistiken des Loadbalancers<br />
= 0 # default<br />
<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = Prozent<br />
<br />
Prozentwert, mit dem die Timeout-Zeit beaufschlagt wird<br />
default = 30<br />
<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = Millisekunden<br />
<br />
Minimale Zeit in Millisekunden, die zur Timeout-Zeit hinzuaddiert wird<br />
default = 300<br />
<br />
<br />
===== lb_max_readers =====<br />
{{Optional}}<br />
lb_max_readers = limit (Zahl)<br />
<br />
beschränkt die Zahl der Reader während der Lernphase des Loadbalancing<br />
<br />
0 = unbegrenzt (default)<br />
x = beschränkt auf ein Limit von x (Zahl)<br />
<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional}}<br />
lb_auto_betatunnel = 0|1<br />
<br />
Ermöglicht automatisches Betatunneling für Betacrypt (CAIDs 1801, 1833, 1834 und 1835), wenn Loadbalancing verwendet wird<br />
lb_auto_betatunnel = 0 # ausgeschaltet<br />
= 1 # eingeschaltet (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Eintragungen für Betatunnel in oscam.user werden bevorzugt. Siehe [[streamboard:wiki/index.php/OSCam/de/Config/oscam.user#betatunnel|Betatunnel]]<br />
<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
setzt den Mode für das automatische Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only)<br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = Auswahl (Zahl)<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = immer Betacrypt<br />
105 = wählt einen Mittelwert<br />
200 = immer Nagravision<br />
<br />
<br />
=== '''Monitor''' ===<br />
Hier sind nur dann Eintragungen erforderlich, wenn ein Monitor benutzt wird!<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
UDP-Port für den Monitor<br />
port = 0 # Kein Monitor<br />
= # [blank] Portnummer Monitor ausgewählt<br />
<br />
Beispiel:<br />
port = 24480 # Monitor eingeschaltet mit Port 24480<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Service mit einer bestimmten IP-Adresse verbinden<br />
serverip = # IP-Adresse<br />
= # [blank] alle IP's (default)<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Unverschlüsselte Monitorverbindungen.<br />
<br />
Möglich<br />
* eine oder mehrere IP-Einzeladressen<br />
* eine oder mehrere IP-Bereiche<br />
* eine Mischung von IP-Einzeladressen oder IP-Bereichen<br />
<br />
Beispiel<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 und IP-Bereich 192.168.0.0 bis 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] keine unverschlüsselte Monitorverbindung.<br />
<br />
<br />
==== aulow ====<br />
{{Optional}}<br />
Zeitraum in Minuten, in dem keine EMM erscheinen, so dass der Client von "active" auf "on" gesetzt wird.<br />
<br />
Beispiel<br />
aulow = 30 # Nach 30 Minuten ohne EMM wird der Status von "active" auf "on" gesetzt (default).<br />
<br />
<br />
==== monlevel ====<br />
{{Optional}}<br />
Monitor-Level<br />
0 = Kein Zugriff auf Monitor (default)<br />
1 = Nur Server und eigene Prozeduren<br />
2 = Alle Prozeduren, aber nur ansehen<br />
3 = Alle Prozeduren, reload von oscam.user möglich<br />
4 = Unbeschränkter Zugriff<br />
<br />
Beispiel<br />
monlevel = 4 # Kompletter Zugriff<br />
<br />
Monlevel kann durch Eintragungen in oscam.user überschrieben werden!<br />
<br />
<br />
==== hideclient_to ====<br />
{{Optional}}<br />
Zeitspanne in Sekunden für das Ausblenden von Clients, die keine Anfragen senden. Siehe auch Parameter '''httphideidleclienst''' in Abschnitt [webif].<br />
hideclient_to = 40 # Clienten werden nach 40 Sekunden ohne Anfrage ausgeblendet<br />
= 0 # Keine Ausblendung von Clienten im Leerlauf<br />
<br />
<br />
==== appendchaninfo ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8546:03/13/2013</span><br />
<br />
Fügt die Channel-Info aus der oscam.services der Log-Meldung hinzu. Bei Verwendung von Monitor und Webinterface ist dies eine sehr nützliche Routine!<br />
appendchaninfo = 1 # Die Channel-Info wird hinzugefügt<br />
= 0 # Keine Channel-Info (default)<br />
<br />
<br />
=== '''lcd''' ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
<br />
==== lcd_outputpath ====<br />
{{Optional}}<br />
Hier kann ein Pfad für den LCD-Output eingestellt werden<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
<br />
==== lcd_hideidle ====<br />
{{Optional}}<br />
Verbergen eines Readers im LCD-Output während des Leerlaufs<br />
<br />
lcd_hideidle = 1 # Verbergen, wenn der Leerlauf länger als 20 Sekunden dauert<br />
= 0 # default<br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional}}<br />
LCD-Refresh-Interval in Sekunden (Minimum 5 Sekunden)<br />
<br />
Default:<br />
lcd-writeinterval = [blank] 10 Sekunden<br />
<br />
<br />
=== '''WebIf''' ===<br />
Eintragungen sind nur dann erforderlich, wenn das Web-Interface (by Alno) als Modul ausgewählt wurde.<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
<br />
==== Dateiformat zum Senden von EMMs via Webinterface ====<br />
(von Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' <br />
<br />
* Die Datei muß im TXT Format sein.<br />
* Jedes PRE-CAM EMM muss in einer eigenen Zeile vorliegen.<br />
* Die EMMs müssen im HEX Format vorliegen.<br />
** Beispiel: AABBCCDD...<br />
* Leerzeichen und Tabs zwischen den bytes sind erlaubt:<br />
** AA BB CC DD...<br />
* Groß- und/oder Kleinschreibung oder gemischte Schreibweise für jeden HEX-Wert sind erlaubt:<br />
** AA aa Aa aA...<br />
* Andere Zeichen oder Kommentare sind nicht erlaubt.<br />
<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
Port, auf dem das Webinterface hört.<br />
Standard ist Port 8888 wenn kein eintrag erfolgt<br />
<br />
httpport = 83 # Webinterface hört auf '''http-port 83'''<br />
= +83 # Webinterface hört auf '''https-port 83''' (SSL)<br />
0 # Webinterface ist ausgeschaltet<br />
<br />
<br />
==== httpcert ====<br />
{{Optional}}<br />
Datei für das SSL-Zertifikat<br />
httpcert = oscam.cert # (siehe dort!)<br />
= # [blank] es wird die Datei oscam.pem (embedded) verwendet<br />
<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
Beispiel<br />
httpforcesslv3 = 0 (default)<br />
= 1 benutze SSLv3<br />
<br />
<br />
==== httpuser ====<br />
{{Mandatory}}<br />
Name des Users für den Zugriffsschutz. Es wird zwar [blank] als Default-Wert angeboten. Davon wird aber dringend abgeraten; daher wird dieser Parameter hier als '''zwingend''' beschrieben.<br />
httpuser = # xyxyxy<br />
<br />
<br />
==== httppwd ====<br />
{{Mandatory}}<br />
Passwort für den Zugriffsschutz. Es gilt das gleiche wie für httpuser.<br />
httppwd = # 123456<br />
<br />
'''Die Parameter ''user'' und ''pwd'' werden beim Verbindungsaufbau zum Webinterface in einem Kontrollfenster abgefragt. Fehlen sie oder sind sie fehlerhaft, erfolgt die Meldung ''Forbidden'' und der Verbindungsaufbau wird abgebrochen!'''<br />
<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6825:05/15/2012</span><br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Füge den content des embedded CSS '''nicht vor''' dem content des user-css ein (default)<br />
1 # Embedded CSS wird '''vor''' dem externen CSS hinzugefügt(siehe nächsten Parameter: [[#httpcss|httpcss]])<br />
<br />
Dieser Parameter kann dazu benutzt werden, den embedded CSS mit custom styles zu überschreiben. Die laufenden CSS styles können hier angeschaut werden: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
<br />
==== httpcss ====<br />
{{Optional}}<br />
Für das Webinterface stehen verschiedene Styles in unterschiedlicher farblicher und graphischer Darstellung zur Verfügung. Der User kann die für ihn interessanten Style-Dateien (.css) speichern und je nach "Stimmung" verwenden. Hier wird der Pfad zu den Style-Dateien festgelegt.<br />
<br />
Beispiel<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] es wird der embedded Style verwendet (default)<br />
<br />
Styles werden hier veröffentlicht: [[streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
<br />
==== httptpl ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7083:06/25/12</span><br />
<br />
Pfad für externe templates und picons<br />
httptpl =<br />
= # [blank] Keine externen Templates<br />
<br />
Multiple simultane templates und picons können durch die Anlage von Unterordnern (mit max. 32 alphanumerischen Zeichen) zur Verfügung gestellt werden. Der Name des Unterordners korrespondiert mit dem Unterordner in der URL, default : [blank]<br />
<br />
Beispiele<br />
<br />
httptpl = /this/is/my/path <br />
<br />
Ordner mit multiplen templates: <br />
/this/is/my/path/template1 <br />
/this/is/my/path/template2 <br />
<br />
gültige URLs: <br />
http://host:port/template1 <br />
http://host:port/template2 <br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httpoverwritebakfile ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = überschreibe backup configurations files (*.bak)<br />
0 = default<br />
<br />
<br />
==== httplocale ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
hier kann ein "locale environment" gesetzt werden.<br />
<br />
default = [blank] kein environment<br />
<br />
Siehe auch hier:<br />
<br />
http://de.wikipedia.org/wiki/locale<br />
<br />
<br />
==== httpjscript ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
Path für oscam.js javascript, default : [blank]<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional}}<br />
Aktualisierungszeit in Sekunden, in der die (kompletten) Seiten des Webinterfaces aktualisiert werden<br />
httprefresh = 7 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httppollrefresh ====<br />
{{Optional}}<br />
<br />
Initialisierungszeit des Pollings und Aktualisierungszeit, in der diverse Daten des Webinterfaces neugeladen werden (Zeit kann auf den entsprechenden Seiten geändert werden)<br />
httppollrefresh = 60 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httpshowpicons ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # zeige picons in userlist<br />
0 # default<br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httphideidleclients ====<br />
{{Optional}}<br />
Dieser Parameter ermöglicht es, einen Clienten nach Ablauf der im Parameter '''hideclient_to''' im Abschnitt [monitor] festgelegten Leerlauf-Zeitspanne (siehe dort!) auszublenden.<br />
httphideidleclients = 1 # Ausblenden<br />
= 0 # Nicht ausblenden (default)<br />
<br />
==== httphidetype ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
Buchstabe der definiert, welcher type in der type-column auf der Statusseite des Webinterfaces versteckt werden soll. <br />
s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
<br />
==== httpscript ====<br />
{{Optional}}<br />
Pfad für Skripte, die vom Webinterface aus gestartet werden können<br />
httpscript = # Pfad<br />
= # [blank] kein Pfad<br />
<br />
<br />
==== httpallowed ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8842:08/17/2013</span><br />
<br />
Hier werden IP-Addressen, IP-Bereiche oder beides festgelegt, die auf das Webinterface zugreifen dürfen. Es wird zwar auch ein [blank] als Default-Wert angeboten, dessen Sinn sich aber nicht erschließt! Wenn das Webinterface benutzt werden soll, dann muss es auch die Möglichkeit geben, sich mit ihm zu verbinden. Daher wird dieser Parameter als '''zwingend''' dargestellt.<br />
<br />
Wenn ein localhost nach '''IPv6''' aufgelöst werden soll, muss die Zeile mit '''::1''' abgeschlossen werden!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
Beispiel<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen <br />
und werden nach IPv6 aufgelöst<br />
'''Default Werte'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255,::1<br />
<br />
<br />
==== httpdyndns ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6558:03/21/12</span><br />
<br />
Zulassen von DYNDNS-Verbindungen durch das Webinterface.<br />
<br />
httpdyndns = hostname[,hostname][,hostname]<br />
<br />
Beispiel<br />
httpdyndns = host1.exemple.com, host2.exemple.com<br />
<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional}}<br />
Sicherung der Konfigurationsdateien<br />
httpsavefullcfg = 0 # alle nicht leeren Parameter,<br />
# alle nicht Default-Parameter,<br />
# alle Parameter, die nicht den gleichen Inhalt enthalten wie dieselben Parameter in [global] (default).<br />
1 # alle Parameter<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional}}<br />
<br />
Über das Webinterface können in bestimmtem Unfang Konfigurations-Dateien editiert und gesichert werden. Das ist für den Server-Admin, der sich nicht immer in der Nähe zur Konsole des Servers befindet, sehr vorteilhaft. Wenn aber weitere User oder andere Beteiligte ebenfalls Zugang zum Webinterface und damit Zugriff auf die Daten haben, kann das zu einem Problem werden. Die Möglichkeit des Editierens (Schreibens) kann daher mit diesem Parameter ausgeschaltet werden.<br />
httpreadonly = 1 # nur Lesezugriff möglich<br />
= 0 # alles ist möglich (default)<br />
<br />
<br />
==== httpiconpath ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9463/01/28/2014</span><br />
<br />
httpiconpath = path<br />
<br />
Pfad zur Picon-Datei, default [blank] none<br />
<br />
<br />
==== httphelplang ====<br />
{{Mandatory}}<br />
httphelplang = de|en|fr|it<br />
<br />
Auswahl der Sprache für die Kontexte<br />
<br />
de = deutsch<br />
en = englisch<br />
fr = französisch<br />
it = italienisch<br />
[blank] = englisch (default)<br />
<br />
<br />
==== httposcamlabel ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
Setzt ein individuelles label für den header des Webinterfaces, default: OSCam rXXXX<br />
<br />
<br />
=== '''Cache''' ===<br />
{{OSCamConfCacheParameter}}<br />
<br />
<br />
==== delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
<br />
==== max_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
max_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clientanfrage im Cache verbleiben. Die Zeit muß 3,5 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
==== max_hit_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8910:09/10/2013</span><br />
<br />
max_hit_time = in Sekunden<br />
<br />
Maximale Zeit, die Treffer für cache exchange im cache verbleiben müssen um wait_time zu evaluieren, default: 15<br />
<br />
<br />
==== wait_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Wartezeit und Dynamische Wartezeit in Millisekunden für cache exchange und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
<br />
= [blank] none (default)<br />
<br />
'''Info:'''<br />
awtime --> Zeit die bei jeder Anfrage gewartet wird (always wait time)<br />
dwtime --> Zeit die bei positivem Fund eines CWs im Cache gewartet wird (dynamic wait time)<br />
<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
<br />
Verwendungspraxis:<br />
wait_time = 098C:5:130,09C4:5:130,1702:5:1900,1830:5:490,1843:5:490,0D05:5,0B00:5<br />
<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional}}<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode (bestimmt die Verwenung des Parameters ''counter'')<br />
<br />
0 = Falls ''wait_time'' abgelaufen ist, sende das CW mit dem höchsten counter an die clients<br />
1 = Niemals ein CW (von cacheex) aus dem cache versenden, wenn der counter aus dem cacheex den in diesem Parameter <br />
gesetzten counter nicht erreicht. Falls ''wait_time'' erreicht ist, geht der request an normale reader. <br />
Nur wenn ein CW den gesetzten counter erreicht, wird es an die clients gesendet.<br />
Default = 0<br />
<br />
<br />
* counter (bestimmt den counter des CW, der mindestens erreicht werden muss, um versendet zu werden)<br />
<br />
Default = 1 (benutze das CW mit dem höchsten counter aus dem cache)<br />
<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = erlaube bad cw's von einem festgelegten fallback reader. Default = 0<br />
<br />
<br />
'''Info:'''<br />
<br />
Bei '''aktiviertem''' Parameter wird bei einem bad CW die Anfrage an den fixed Fallback weitergeleitet<br />
und somit ein freetzer meist verhindert.<br />
<br />
<br />
Siehe --> [[OSCam/de/Config/oscam.server#fallback|fallback]]<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== csp_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von CSP-Nodes hört<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Lokale Bind-IP für csp_port (siehe oben)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 ausgeschaltet (default)<br />
= 1 eingeschaltet<br />
<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Für NDS Karten nur in einer light Version verfügbar''' <br />
<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID, für die der CW-Cycle-Check ermöglicht werden soll, [blank] = kein Check (Default)<br />
<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = Zahl<br />
<br />
Maximum von CW-Cycle-Entries in die Liste, default = 500, maximum = 4000<br />
<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = Minuten<br />
<br />
Minimalzeit, die ein erkannter Cycle in der Memory verbleiben soll, default = 15, maximum = 240<br />
<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = ungültige CW-Cycle kommen nur ins Log <br />
1 = ungültige CW-Cycle werden gedropped (default)<br />
<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, 1 = alte CW-Cycle werden gedropped, 0 = kein Dropping (default)<br />
<br />
<br />
==== cwcycle_sensitive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (oder mehr) gleiche bytes und drop neues CW<br />
3 = 3 (oder mehr) gleiche bytes und drop neues CW<br />
4 = 4 (oder mehr) gleiche bytes und drop neues CW<br />
<br />
--> Höherer Wert entspricht höherer Empfindlichkeit<br />
<br />
<br />
==== cwcycle_usecwcfromce ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = benutze CW Info aus cache exchange<br />
0 = default<br />
<br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
antworte, wenn das cache exchange timeout erreicht ist und keine normalen Reader zur Verfügung stehen, die ECM's senden:<br />
<br />
0 = sende sofort '''not found''' an den client (default)<br />
1 = warte auf eine Antwort für cache exchange bis der timeout für den client erreicht ist<br />
<br />
<br />
=== '''csp (UDP''') ===<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:02/16/2013 Siehe Section '''[cache]'''!</span><br />
<br />
Abschnitt nur dann erforderlich, wenn csp als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von csp-nodes hört<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
Local Bind IP für den oben genannten UDP-Port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== wait_time ====<br />
{{Mandatory}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET Siehe Section '''[cache]'''!</span><br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8060:01/04/13</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8077:01/06/13</span><br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
= [blank] none (default)<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
Wartezeit in Millisekunden für cache exchange ('''nur mode 2&3''') und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
=== '''Camd 33 (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn camd33 als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd 33 Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein Adressbereich, der unverschlüsselt übertragen wird.<br />
<br />
Beispiel:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt =<br />
<br />
<br />
==== passive ====<br />
{{Optional}}<br />
Definition für aktiven oder passiven Client. Generell geht das Camd3.3x-Protokoll von einem aktiven Client aus. Es kann aber unter bestimmten Umständen bei manchen Clients (meistens plugin) zur Schwierigkeiten kommen. In diesem Fall<br />
<br />
Beispiel:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
<br />
==== key ====<br />
{{Optional}}<br />
<br />
Schlüssel, der für die Verschlüsselung verwendet wird. (128bit Verschlüsselung)<br />
<br />
Beispiel:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key =<br />
<br />
<br />
=== '''cs357x (UDP)''' ===<br />
Abschnitt nur dann erforderlich, wenn cs357x als Client Protokoll verwendet wird.<br />
Dieses Protokoll verschlüsselt grundsätzlich und bildet den Schlüssel aus dem Benutzernamen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:'''<br />
'''cs357x''' wurde auch als '''camd35''' bezeichnet. Beide Bezeichnungen meinen das gleiche Protokoll mit den gleichen Funktionsweisen und Parametern. Künftig wird zur Vermeidung von Irritationen '''nur noch cs357x''' verwendet.<br />
<br />
Eine genauere Erklärung für UDP findet Ihr hier [http://de.wikipedia.org/wiki/User_Datagram_Protocol]<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus cs357x Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs357x -clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Tread]]<br />
<br />
<br />
=== '''cs378x''' (TCP) ===<br />
Abschnitt nur dann erforderlich, wenn cs378x als Client Protokoll notwendig ist.<br />
<br />
Eine ausführliche Erklärung von TCP findet Ihr hier [http://de.wikipedia.org/wiki/Transmission_Control_Protocol]<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein das OSCam nur antwortet wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs3.78x-clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
<br />
=== '''Newcamd (TCP)''' ===<br />
Abschnitt nur dann erforgerlich, wenn newcamd als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
<br />
==== key ====<br />
{{Mandatory}}<br />
Schlüssel für die Newcamd Verbindung zum Client.<br />
<br />
Beispiel:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Newcamd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000@1234:000000 # (CAID 1234 ist über Port 15000 erreichbar)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 ist über Port 15000 erreichbar CAID 5678 über Port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Hat der Server mehrere IP Adressen werden nur Anfragen die an die konfigurierte IP gehen beantwortet.<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein bestimmter IP Bereich der sich auf den Newcamd Server verbinden darf.<br />
<br />
Beispiel:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed =<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
Der Server versucht, die Newcamd Verbindung am leben zu halten.<br />
<br />
Beispiel:<br />
keepalive = 1 # (aktiviert)<br />
keepalive = 0 # (deaktiviert)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
<br />
==== mgclient ====<br />
{{Optional}}<br />
Aktiviert das Extendet Newcamd Protokol, um mehrer CAID's über einen Port zu schicken<br />
<br />
Beispiel:<br />
mgclient = 1 # (aktiviert)<br />
mgclient = 0 # (deaktiviert)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br />
=== '''scam''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9878:09/29/2014</span><br />
<br />
Abschnitt nur dann erforderlich, wenn scam als Client-Protocol verwendet wird.<br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
port = port<br />
<br />
UDP-Port für scam server, default = 0<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
=== '''Radegast''' ===<br />
Abschnitt nur dann erforderlich, wenn Radegast als Client-Protokoll notwendig ist.<br />
<br />
{{OSCamConfRadegastParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
TCP/IP-Port für Radegast-Clients. Mit dem Eintrag wird das Radegast-Protokoll enabled.<br />
port =<br />
= 0 (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
<br />
Username des Radegast-Client<br />
user = username<br />
<br />
<br />
=== '''Serial''' ===<br />
Abschnitt nur dann erforderlich, wenn eine serielle Reader-Schnittstelle notwendig ist.<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
<br />
==== device ====<br />
{{Optional}}<br />
<br />
Parameter der Device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = Name der Serial Device<br />
option = timeout = Millisekunden Timeout für die Verbindung default: 50<br />
= delay Millisekunden Zusätzliche Verzögerung zwischen 2 Characters<br />
<br />
Unterstützte Serial Devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
<br />
=== '''Cccam (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn Cccam als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCccamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6206:01/07/2012</span><br />
<br />
TCP/IP-Ports für CCcam-Clients. Mit dem Eintrag eines oder mehrerer Ports wird das CCcam-Protokoll enabled.<br />
<br />
port = 0|port[,port...]<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled<br />
<br />
<br />
==== version ====<br />
{{Optional}}<br />
Definiert die Version von CCcam, mindestens Version 2.0.11, Default-Wert = 0<br />
<nowiki><main version>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
version = 2.0.11<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
==== reshare ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Reshare-Level<br />
-1 = kein Resharing<br />
0 = nur Reshare für Direct-Peer<br />
1 = Reshare für Direct-Peer und den nächsten Level<br />
x = Reshare für Direct-Peer und die nächsten x Level (x steht für die Zahl der Level)<br />
<br />
Beispiel<br />
reshare = 1 Reshare nur für Direct-Peer und den nächsten Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
==== reshare_mode ====<br />
{{Optional}}<br />
Arten des reshare:<br />
0 = reader reshared nur empfangene SCs für CCcam-reader<br />
1 = reader reshared empfangene SCs (wie=0) und definierte services<br />
2 = reader reshared nur definierte reader-services als virtueller SC<br />
3 = reader reshared nur definierte user-services als virtueller SC<br />
<br />
<br />
==== ignorereshare ====<br />
{{Optional}}<br />
CCcam Reshare-Einstellungen<br />
0 = benutze die Reshare-Einstellungen des Servers (default)<br />
1 = benutze die Reshare-Einstellungen des Readers oder Users<br />
<br />
Beispiel<br />
ignorereshare = 1 Die Reshare-Einstellungen des Readers oder Users werden benutzt<br />
<br />
<br />
==== stealth ====<br />
{{Optional}}<br />
Versteckt aktive user und das extended OSCam-Protokoll. Schützt andere OSCam-user davor, den Server als OSCam-Server zu entdecken!<br />
stealth = 1 # Tarnung eingeschaltet<br />
= 0 # Tarnung aus (default)<br />
<br />
<br />
==== minimizecards ====<br />
{{Optional}}<br />
Modus der Verbindung von CCcam-Servern zu CCcam-Clienten<br />
0 = Keine Aggregation, nur Duplikate werden entfernt (default)<br />
1 = Basierend auf Minimum-Hop: zwei SC's mit unterschiedlichen hops werden zusammengefasst, neue SC's bekommen einen kleineren hop<br />
2 = Aggregation auf CAIDs basierend: alle SC's mit der gleichen CAID werden zusammengefasst, Provider wird entfernt<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional}}<br />
Interval in Sekunden zur Verteilung der share list updates an die Clienten.<br />
<br />
0 = Update basiert auf Server-Updates, Werte kleiner als 10 sind ungültig und werden auf 30 gesetzt.<br />
= [blank) 240 (default)<br />
<br />
<br />
==== keepconnected ====<br />
{{Optional}}<br />
CCcam Keepalive-Modus:<br />
0 = Trenne Client, wenn die maximale Leerlaufzeit (idletime) erreicht ist<br />
1 = Halte die Verbindung (default)<br />
<br />
<br />
==== recv_timeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7672:10/09/2012</span><br />
<br />
recv_timeout = Millisekunden<br />
<br />
hier kann ein network-timeout beim Empfang von Daten gesetzt werden<br />
default = 2000<br />
<br />
<br />
==== forward_origin_card ====<br />
{{Optional}}<br />
forward_origin_card = 0|1<br />
<br />
Weiterleitung des ECM-Requests an den reader, der diese Karte hat.<br /><br />
Loadbalancer und Caching werden dabei deaktiviert.<br />
<br />
1 = Weiterleitung eingeschaltet<br />
0 = Aus (default)<br />
<br />
<br />
==== nodeid ====<br />
{{Optional}}<br />
nodeid = ID<br />
<br />
setzt CCcam node ID in '''hex''', <br />
<br />
default:none<br />
<br />
Beispiel:<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br />
Wenn eine nodeid benutzt wird, dann wechselt der Server das Protokol von "cccam ext" zu "cccam".<br />
<br />
<br />
=== '''Pandora''' ===<br />
{{OSCamConfPandoraParameter}}<br />
==== pand_skip_send_dw ====<br />
pand_skip_send_dw = dummy<br />
<br />
==== pand_allowed ====<br />
pand_allowed = dummy<br />
<br />
==== pand_usr ====<br />
pand_user = dummy<br />
<br />
==== pand_pass ====<br />
pand_pass = dummy<br />
<br />
==== pand_ecm ====<br />
pand_ecm = dummy<br />
<br />
==== pand_port ====<br />
pand_port = dummy<br />
<br />
==== pand_srvid ====<br />
pand_srvid = dummy<br />
<br />
<br />
=== '''GBox''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
{{OScamConfGboxParameter}}<br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBox läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
==== hostname ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
hostname = eigene IP oder hostname<br />
<br />
===== my_password =====<br />
{{Mandatory}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
Passwort = 4 hex bytes, 8 chara<br />
<br />
Mein Passwort<br />
<br />
Beispiel<br />
98AF3E25<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
port = port[,port]... udp ports, die die gbox überwacht<br />
<br />
<br />
==== proxy_card ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy_Card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
proxy reader SmartCard(s), die mit gbox network reshared werden, default = none<br />
<br />
==== ccc_reshare ====<br />
{{Optional}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = cccam Karten können ins gbox Netzwerk transportiert werden , default = 0 (global setting)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Caid der Karten müssen in 'ccc_gbx_caid =' spezifiziert werden<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Der Share Level für jeden peer wird spezifiziert in oscam.server [reader]-> cccam_reshare<br />
<br />
<br/><br />
<br />
==== ccc_gbx_caid ====<br />
{{Optional}}<br />
<br />
ccc_gbx_caid = caid_1,caid_2,...<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' 'ccc_reshare' muß zusätzlich gesetzt werden<br />
<br />
<br/><br />
<br />
==== my_vers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9645:04/09/2014</span><br />
<br />
my_vers = version<br />
<br />
hier kann das low byte (hex) der eigenen gbox version gesetzt werden<br />
<br />
default = 2A<br />
<br />
==== my_cpu_api ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9712:05/11/2014</span><br />
<br />
my-cpu_api = byte<br />
<br />
Setze CPU und API Byte in hexadecimal<br />
default = 40<br />
<br />
<br />
==== gbox_reconnect ====<br />
{{Optional}}<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min=60, max=300<br />
<br />
==== gsms_disable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9714:05/11/2014</span><br />
<br />
gsms_disable = 0|1<br />
<br />
schaltet gbox short message service (GSMS) aus, <br />
default = 1<br />
<br />
==== tmp_dir ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/2014</span><br />
<br />
tmp_dir = path<br />
<br />
tempory directory für gbox<br />
<br />
default = /tmp/.oscam<br />
<br />
=== '''DVBapi''' ===<br />
{{Optional}}<br />
Abschnitt nur dann erforderlich, wenn OScam auch als Client zum entschlüsseln eingesetzt werden soll.<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional}}<br />
DVBapi zum lokalen Entschlüsseln verwenden<br />
<br />
Beispiel:<br />
enabled = 0 # (deaktiviert)<br />
enabled = 1 # (aktiviert)<br />
<br />
Default:<br />
enabled = 0<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
Hier wird der User festgelegt, dieser sollte in der oscam.user angelegt sein.<br />
<br />
Beispiel:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
<br />
==== au ====<br />
{{Optional}}<br />
Autoupdate für DVB API aktivieren/deaktivieren.<br />
Abhängig vom verwendeten User aus der oscam.user und dessen au Einstellungen.<br />
<br />
Beispiel:<br />
au = 0 # AU deaktiviert (default)<br />
au = 1 # AU aktiviert<br />
<br />
<br />
==== pmt_mode ====<br />
{{Optional}}<br />
Beispiel:<br />
pmt_mode = 0 # (verwendet camd.socket und PMT Datei)<br />
pmt_mode = 1 # (deaktiviert PMT Datei)<br />
pmt_mode = 2 # (deaktiviert camd.socket)<br />
pmt_mode = 3 # (liest PMT nur beim Start ein)<br />
pmt_mode = 4 # (do not use signal handler for monitoring /tmp)<br />
pmt_mode = 5 # (do not use signal handler for monitoring /tmp & disable camd.socket)<br />
<br />
Default:<br />
pmt_mode = 0<br />
<br />
<br />
==== request_mode ====<br />
{{Optional}}<br />
CAID request mode: <br />
<br />
Beispiel:<br />
request_mode = 0 # versuche alle möglichen CAIDs nacheinander (default) <br />
request_mode = 1 # versuche alle CAIDs simultan<br />
<br />
<br />
==== listen_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP IP port für SAT IP clients. Die Filterung muss auf der Client-Seite erfolgen!<br />
<br />
0 = disabled (default)<br />
<br />
<br />
==== boxtype ====<br />
{{Mandatory}}<br />
Verwendete Box auf der DVB API aktiviert wurde.<br />
<br />
Beispiel:<br />
boxtype = ufs910<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt||qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
Hinweis:<br />
pc steht für generic pc support (laufend supported bei VDR mit vdr-plugin-dvbapi)<br />
<br /><br />
<br />
==== cw_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
cw_delay = in Millisekunden<br />
<br />
Delay beim Schreiben des CW. default = [blank] kein Delay<br />
<br />
<br />
==== delayer ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6808:05/14/2012</span><br />
<br />
delayer = Millisekunden<br />
<br />
Minimum der Zeit, um CW zu schreiben. default: 0<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
<br />
Öffnet die demux-device nach jedem Kanalwechsel neu, default = 0<br />
<br />
<br />
==== decodeforever ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = versuche dauernd auf allen CAIDs zu decodieren<br />
0 = default<br />
<br />
<br />
==== ecminfo_type ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10722:06/13/2015</span><br />
<br /><br />
Definiert die Syntax der Ausgabe in die ecm.info . <br />
<br />
ecminfo_type = 0|1|2|3|4|5 <br />
<br />
Die möglichen Werte bedeuten:<br /><br />
0 - normale oscam syntax<br />
1 - normale oscam syntax, aber die ECMTime wird in Millisekunden anstatt Sekunden angezeigt<br />
2 - wicardd (*1)<br />
3 - mgcamd<br />
4 - cccam<br />
5 - camd3<br />
<br />
(*1)Beispiel:<br /><br />
system: Nagra<br /><br />
caid: 0x1830<br /><br />
pid: 0x1CCE<br /><br />
prov: 000000<br /><br />
cw0: FF A3 7F F1 B8 29 E7 C8<br /><br />
cw1: CB E1 A3 D3 EF FE EF C0<br /><br />
Signature OK<br /><br />
source: ServerXY (cs378x at server:12345)<br /><br />
418 msec -- Sun Jun 14 18:55:37 2015<br /><br />
<br /><br />
<br />
==== read_sdt ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10766:06/15/15</span><br />
<br />
Durch diese Option kann Oscam (mittels Dvbapi) automatisch Kanalname und Providername in die oscam.srvid bzw oscam.srvid2 sowie oscam.provid eintragen. Dazu muss man mindestens 30 Sekunden auf einem Kanal verweilen. Dabei werden allerdings nur noch nicht vorhandene Namen hinzugefügt, bereits vorhandene Einträge in den Dateien werden nicht verändert. So behält man die volle Kontrolle über den Inhalt der Dateien.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = ausgeschaltet (default)<br />
1 = eingeschaltet, aber FTA-Kanäle nicht verarbeiten<br />
2 = eingeschaltet, auch FTA-Kanäle verarbeiten<br />
<br />
==== write_sdt_prov ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10841:06/27/15</span><br />
<br />
Mit dieser Option kann man einstellen, ob die Providernamen zusätzlich in die oscam.srvid bzw oscam.srvid2 eingetragen werden sollen. Dies ist nicht unbedingt erforderlich, weil der Providername automatisch aus der oscam.provid ausgelesen wird. Für diese Option ist das Einschalten von read_sdt erforderlich.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = ausgeschaltet, Providernamen nicht in die oscam.srvid bzw oscam.srvid2 eintragen (default)<br />
1 = eingeschaltet, Providernamen eintragen<br />
<br />
=== '''Anticasc''' ===<br />
Abschnitt nur dann erforderlich, wenn Anticascading als Schutz vor unbefugtem Weiterreichen von Cardsharing angewendet werden soll.<br />
<br />
{{OSCamConfAnticascParameter}}<br />
<br />
<br />
==== enabled ====<br />
{{Mandatory}}<br />
Hiermit wird Anticascading eingeschaltet.<br />
enabled = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== numusers ====<br />
{{Optional}}<br />
Zahl der User, die je Account zugelassen sind.<br />
numusers = 1 # Es ist ein User je Account zugelassen<br />
= 0 # Anticascading ausgeschaltet (default)<br />
<br />
<br />
==== sampletime ====<br />
{{Optional}}<br />
Zeit in Minuten für das Sammeln der Anfragen<br />
sampletime = 5 # Zeitraum von 5 Minuten<br />
= # [blank] Default-Wert 2 Minuten<br />
<br />
<br />
==== samples ====<br />
{{Optional}}<br />
Zahl der Anfragen über dem Limit (mögliche Werte zwischen 2 und 10)<br />
samples = 7 # Limit bei 7 Anfragen<br />
= # [blank] Default-Wert 10 Anfragen<br />
<br />
<br />
==== penalty ====<br />
{{Optional}}<br />
Strafe für den Sünder<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
<br />
Die Strafe kann in der oscam.user überschrieben werden! <br />
<br />
'''Hinweis:''' Fake-CW`s schaden nicht nur demjenigen, dem sie schaden sollen, sondern allen anderen im Share, denn weder oscam noch cccam kann Fake-CW`s von realen CW`s unterscheiden. Wenn also ein Sharepartner von uns ein Fake-CW bekommt und der es dann für 7 Sekunden im cache hat, kann das durch cache2-Hits unbegrenzt an weitere Sharepartner gehen, auch trotz Einstellung von cccmaxhops = 0. Es haben dann unzählige User plötzlich für 7 Sekunden einen Freezer und keiner weiss, warum. Man schadet so also unbewusst allen Sharepartnern, auch denen, mit denen man nicht direkt shart!<br />
<br />
Beispiel<br />
penalty = 3 # Sende korrekte CWs zeitversetzt<br />
<br />
<br />
==== aclogfile ====<br />
{{Optional}}<br />
Dateiname für das AC-Log<br />
aclogfile =<br />
= # [blank] Kein Logfile (default)<br />
<br />
<br />
==== fakedelay ====<br />
{{Optional}}<br />
Fake-Verzögerung in Millisekunden (mögliche Werte zwischen 100 und 3000)<br />
<br />
Beispiel<br />
fakedelay = 500 # Verzögerung von 500 Millisekunden<br />
= # [blank] Default-Wert 1000 Millisekunden<br />
<br />
<br />
==== denysamples ====<br />
{{Optional}}<br />
Wieviel Samples sollen bestraft werden?<br />
<br />
Beispiel<br />
denysamples = 10 # Ab 10 Samples wird bestraft<br />
= # [blank] Default-Wert 8 Samples<br />
<br />
==== acosc_enabled ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
'''Vorbemerkung:'''<br />
mit den nachfolgenden acosc-Parametern wir ein Anticascading über das Zählen der SIDs ('''a'''nticascading '''o'''ver '''s'''id '''c'''ount) ermöglicht.<br />
<br />
acosc_enabled = 0|1<br />
1 = ermöglicht anticascading over SIDs count<br />
0 = default<br />
<br />
<br />
==== acosc_max_active_sids ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = Anzahl<br />
<br />
Maximum aktiver SIDs bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden!<br />
<br />
<br />
==== acosc_zap_limit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = Anzahl<br />
<br />
Zap-Limit bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
Strafe für den Sünder bei Anticascading over SIDs count:<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = Sekunden<br />
<br />
Dauer der Strafe bei Anticascading over SIDs count:<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
==== acosc_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_delay = Millisekunden<br />
<br />
Verzögerung bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.conf&diff=13528
OSCam/de/Config/oscam.conf
2020-02-24T17:21:21Z
<p>Felixka: /* my_password */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.conf''' ==<br />
Dies ist die Hauptkonfigurationsdatei für OSCam. Sie enhält globale Parameter z.B. für das Debuggen, Loggen und den Loadbalancer, sowie einzelne Sektionen für Sondereffekte wie z.B. den Monitor, das Web-Interface, die Protokolle, das DVBapi und das Anti-Cascading. Nur die Sektion [global] ist Pflichtbestandteil, alle übrigen Sektionen sind optional (also nur bei Bedarf) zu verwenden.<br />
<br />
<br />
=== '''Globale Parameter''' ===<br />
Folgende Parameter gibt es im [global] Abschnitt:<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Ist ein Parameter leer oder wird er nicht im Konfigurationsfile angeführt dann gelten die Default-Werte!<br />
<br />
<br />
==== nice ====<br />
{{Optional}}<br />
'''Systempriorität'''. OSCam benötigt fast keine CPU-Leistung. Wenn aber CPU-Leistung benötigt wird, sollte diese sofort zur Verfügung stehen. Werte von 20 bis -20 sind möglich, wobei 20 gering und -20 sehr hoch ist. Wird der Parameter auskommentiert(#), wird diese Funktion nicht ausgerufen. Das ist wichtig z.B. für die dbox 2[http://de.wikipedia.org/wiki/DBOX2], wenn die Fehlermeldung "''relocation error:setpriority''" erscheint. Vgl. [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Beispiel:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
<br />
===== pidfile =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8176/01/24/2013</span><br />
<br />
pidfile = filename, <br />
<br />
ändere den Namen für das pidfile und den Speicherort,<br />
mit [blank] none (default)erfolgt die Speicherung als oscam.pid in /tmp<br />
<br />
Beispiel:<br />
pidfile = /var/run/oscam.pid<br />
<br />
<br />
===== logfile =====<br />
{{Optional}}<br />
Mit diesem Parameter wird Name und Pfad und für das Logfile (mehrere sind nicht möglich) festgelegt, zusätzlich auch das Loggen in stdout oder syslog. Es ist auch möglich, das Loggen nur für stdout oder syslog festzulegen und somit keine Logdatei zu schreiben.<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
Möglichkeiten:<br />
logfile = /var/log/oscam.log # Datei oder Linuxdevice (z.B. /dev/tty)<br />
logfile = syslog # Die Ausgabe wird an den syslogd übergeben<br />
logfile = stdout # Bildschirmausgabe<br />
<br />
Beispiel:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format des logfile:<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timed out<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
<br />
===== ecmfmt =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8056:01/03/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
definiert ECM log format, default:c@p/i/s/l:h:Y:t <br />
<br />
mögliche Variablen: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and cccam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , diese ID wird durch die Tierbeschreibung aus der oscam.tiers (falls vorhanden) ersetzt<br />
w = CW<br />
y = Payload (kurz, 3 Bytes)<br />
Y = Payload (lang, 6 Bytes)<br />
<br />
benutze einen Wert als Prefix, um eine Variable mit diesem Wert zu verbergen<br />
<br />
Beispiel:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w <br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn10048:11/30/13/2013</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs werden eingefügt, wenn CWs nicht ein ungleiches oder gleiches Muster haben (default)<br />
1 = disabled<br />
<br />
<br />
===== loghistorysize =====<br />
{{Optional}}<br />
loghistorysize = bytes<br />
<br />
Größe der Log-Messages-History im WebIf oder Monitor in Bytes<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) # ist nur wirksam, wenn '''preferlocalcards = 1''' in der [global] section gesetzt ist, sonst unter stage 3!<br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
Beispiel:<br />
<br />
P/2/2/2 oder L/2/4/4<br />
<br />
<br />
===== maxlogsize =====<br />
{{Mandatory}}<br />
<br />
Hier kann die maximale Größe des Logfiles in KBytes festgelegt werde. Das ist besonders wichtig für Server mit nur geringem Speicherumfang (z.B. auf dbox2). Darum wird dringend empfohlen, bei solchen Servern diese Größe sorgfältig zu bestimmen. Nicht selten "platzt" ein System, weil die Logfiles unkontrolliert riesige Ausmaße angenommen haben!<br />
<br />
Beispiel<br />
maxlogsize = 20 # Logfile geht bis zu 20 KBytes<br />
= 0 # Logfile erhält '''unbegrenzte''' Größe<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile geht bis zu 10 KBytes (default)<br />
<br />
<br />
===== logduplicatelines =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8290/02/05/2013</span> <br />
<br />
logduplicatelines = 0|1<br />
<br />
= 1 schaltet das Schreiben von Duplikatzeilen im Logfile aus<br />
= 0 schaltet das Schreiben von Duplikatzeilen im Logfile ein = default<br />
<br />
<br />
===== disablelog =====<br />
{{Optional}}<br />
Schaltet Logfile<br />
1 = Ausschalter ein, also '''kein''' Log - puh ;-) -<br />
0 = Ausschalter aus, also '''ein''' Log<br />
<br />
Beispiel:<br />
disablelog = 1 # es wird '''kein''' Log erstellt<br />
<br />
Default:<br />
disablelog = 0 # es wird '''ein''' Log erstellt<br />
<br />
<br />
===== cwlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für CW-Logging eingestellt werden. Der Pfad ist relativ zum Workdirectory und muss existieren, sonst werden keine Logs erstellt und auch keine Fehler ausgegeben.<br />
<br />
CWs (control words) sind die Antworten der Karte mit der ein bestimmter Sender für einige Sekunden freigeschaltet wird bevor das nächste cw übertragen wird. Die cw Logdatei kann dazu verwendet werden, den Sender zeitversetzt zu entschlüsseln. Das wird auch "Offline Decoding" genannt. Siehe [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
OScam erstellt für jeden Sender und jeden Tag eine neue *.cwl Datei mit Datum, Service-ID und Sendername, z.B. 110808_I000B_Sky_Cinema_+1.cwl mit diesem Inhalt:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
Wenn mindestens ein User diesen Sender schaut, werden alle notwendigen CWs gespeichert.<br />
Bitte einen Speicherort mit genügend Platz angeben, da pro Tag und Sender einge 10KB an Daten anfallen. Empfehlenswert ist ein Skript, das die logfiles regelmässig verschiebt/löscht.<br />
<br />
Beispiel:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] kein Pfad für CW-Log, Logging abgeschaltet<br />
<br />
<br />
===== emmlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für EMM-Logging eingestellt werden. Welche EMMs mitgeloggt werden sollen, kann mit den "saveemm-*"-Parametern in der oscam.server detailliert eingestellt werden.<br />
<br />
Beispiel:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] Es wird der Config-Ordner verwendet<br />
<br />
<br />
===== usrfile =====<br />
{{Optional}}<br />
Festlegung des Namens eines Files für user logging.<br />
<br />
Das user logging file hat folgendes Format<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Beispiel:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
<br />
===== disableuserfile =====<br />
{{Optional}}<br />
Jetzt wird es ganz wild: Auch wenn ein Logfile eingeschaltet ist (siehe logfile) kann hier das userfile ausgeschaltet werden.<br />
<br />
Beispiel:<br />
disableuserfile = 1 # es wird '''kein''' userfile erzeugt<br />
= 0 # es wird '''ein''' userfile erzeugt<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
<br />
===== usrfileflag =====<br />
{{Optional}}<br />
Einstellung des Logging-Modus<br />
0 = Es wird nur das Ein- und Ausloggen des Clients im Userfile geloggt<br />
1 = Jedes Zappen eines Clients wird im Userfile geloggt<br />
Default-Wert ist 0<br />
<br />
Beispiel:<br />
usrfileflag = 1 # Alles wird geloggt<br />
<br />
Default:<br />
usrfileflag = 0 # Nur Login und Logout wird geloggt<br />
<br />
<br />
===== saveinithistory =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn7128;07/02/2012</span><br />
<br />
Sicherung der Reader-Init-History. Wird benötigt, um die Entitlements anzuzeigen.<br />
<br />
Beispiel:<br />
saveinithistory = 1 # Sicherung nach /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # Keine Sicherung<br />
<br />
<br />
===== disablemail =====<br />
{{Optional}}<br />
disablemail = 0|1<br />
<br />
Schaltet das Speichern von NDS Videoguard MailMessages des Providers aus. Default: 1 (disabled)<br />
<br />
<br />
===== mailfile =====<br />
{{Optional}}<br />
mailfile = file<br />
<br />
Legt das File fest, in dem NDS Videoguard MailMessages des Providers gespeichert werden sollen.<br />
<br />
Default: [blank] kein File.<br />
<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
Delay in Millisekunden für eine Anfrage an cache exchange mode 1 reader, default: kein delay<br />
<br />
<br />
==== reader ====<br />
===== enableled =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
<br />
===== serialreadertimeout =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8541:03/13/2013</span><br />
<br />
'''Nur wenn Serialreader benutzt wird'''<br />
Timeout in Millisekunden für Serialreader<br />
<br />
Beispiel:<br />
serialreadertimeout = 1200 # Timeout nach 1200 Millisekunden<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout nach 1500 Millisekunden<br />
<br />
<br />
===== waitforcards =====<br />
{{Optional}}<br />
Hier kann festgelegt werden, ob OSCam beim Start des Programms auf lokale Karten wartet, bevor die Netzwerkports geöffnet werden.<br />
<br />
Beispiel:<br />
waitforcards = 0 # Nicht Warten<br />
<br />
Default:<br />
waitforcards = 1 # Warten<br />
<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional}}<br />
waitforcards_extra_delay = Millisekunden<br />
<br />
Zusätzliche Verzögerung in Millisekunden nach Warten auf lokale SCs während des Starts vor dem Öffnen von Netzwerk-Ports<br />
<br />
default = 500<br />
<br />
<br />
===== preferlocalcards =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9605:03/29/2014</span><br />
<br />
Der Parameter legt fest, welche Quelle zuerst für die Dekodierung verwendet werden sollen.<br />
<br />
Beispiel:<br />
preferlocalcards = 0 # lokale Karten werden wie remote Reader behandelt<br />
<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
preferlocalcards = 2 # Lokale Karten werden dem CacheEX vorgezogen<br />
<br />
Default:<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
<br />
===== readerrestartseconds =====<br />
{{Optional}}<br />
Festlegung einer Wartezeit in Sekunden zwischen Restarts von Readern.<br />
<br />
Beispiel:<br />
readerrestartseconds = 10 # Wartezeit 10 Sekunden<br />
= 0 # '''keine Readerrestarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # Wartezeit 5 Sekunden<br />
<br />
<br />
===== block_same_ip =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_ip = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit derselben IP-Addresse zurück, default = 1<br />
0 = nicht zurückweisen<br />
<br />
<br />
===== block_same_name =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_name = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit demselben Namen zurück, default = 1<br />
0 = Nicht zurückweisen<br />
<br />
<br />
==== cache ====<br />
===== cachedelay =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
<br />
===== max_cache_time =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clienten-Anfrage im cache verbleiben. Die zeit muss 2 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
===== max_cache_count =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = Anzahl, default 1000<br />
<br />
Maximale Zahl von CWs im cache<br />
<br />
<br />
===== cacheexwaittime =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
Maximale Wartezeit für einen Cache-Zugriff in Millisekunden für cacheex = 1 Reader.<br />
50 Millisekunden = default<br />
<br />
<br />
===== cacheexenablestats =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== client ====<br />
===== clienttimeout =====<br />
{{Optional}}<br />
<br />
Maximale Zeit in Millisekunden, bevor ein Client ein Timeout erhält.<br />
<br />
Beispiele:<br />
clienttimeout = 10000 # nach 10 Sekunden erfolgt ein Timeout<br />
clienttimeout = 10 # hier erfolgt aber ein Timeout bereits nach 10 Millisekunden, s. Hinweis unten!<br />
clienttimeout = 8 # der Timeout erfolgt nach 8000 Millisekunden (= 8 Sekunden), s. Hinweis<br />
Default:<br />
clienttimeout = 5000 # nach 5000 ms (=5 Sekunden) erfolgt ein Timeout<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bei Werten < 10 (also 1 bis 9) werden diese mit Eintausend multipliziert, aus "5" wird also 5000 ms. Eine eingetragene "10" bleibt aber bei zehn Millisekunden!<br />
<br />
===== clientmaxidle =====<br />
{{Optional}}<br />
Begrenzt die Leerlaufzeit eines Clienten in '''Sekunden''' bevor er vom Traffic getrennt wird.<br />
<br />
Beispiel:<br />
clientmaxidle = 200 # Trennung nach 200 Sekunden<br />
= 0 # Begrenzung ist ausgeschaltet, keine Trennung vom Traffic beim Leerlauf!<br />
<br />
Default:<br />
clientmaxidle = 120 # Trennung nach 120 Sekunden<br />
<br />
<br />
===== suppresscmd08 =====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
suppresscmd08 = 0 # Mitteilung an Clienten mit den Protokollen camd 3.5x, 3.57x und 3.78x, keine neuen Anfragen wegen <br />
zurückgewiesener Kombination aus CAID, SID und Provider-ID zu schicken (default)<br />
= 1 # Anfragen sollen weiterhin geschickt werden<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
<br />
==== fallbacktimeout ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Bei mehreren Readern (Siehe Abschnitt [reader] in oscam.server) kann ein Reader bestimmt werden, auf den z.B. bei einer Störung der übrigen Reader der traffic zurück fällt.<br />
<br />
Maximale Wartezeit des [[Cardserver]]s in Millisekunden auf primäre [[Reader]], bevor der/die [[Fallback]]-Reader (falls vorhanden!) befragt werden.<br />
<br />
Beispiel:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Der Wert muss größer dem Wert von "serialreadertimeout" gewählt werden, ansonsten werden die Standardwerte verwendet.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = Millisekunden<br />
<br />
Wartezeit in Millisekunden, bevor der für eine CAID reservierte [[Reader]] befragt wird.<br />
<br />
Default = 2500<br />
<br />
<br />
==== sleep ====<br />
{{Optional}}<br />
Alle User nach "n" Minuten "inaktivieren", wenn diese den Sender nicht innerhalb der eingestellten Zeit wechseln. Diese Einstellung kann auch für jeden User separat vorgenommen werden: [[OSCam/de/Config/oscam.user#sleep]]<br />
<br />
Beispiel:<br />
sleep = 240 # inaktiv nach 4 Stunden<br />
<br />
Default:<br />
sleep = # [blank]<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam hört auf ALLE IP Adressen.<br />
<br />
<br />
==== bindwait ====<br />
{{Optional}}<br />
Maximale Zeit in Sekunden, die der [[Cardreader]] beim Start wartet, bis er den jeweiligen Netzwerk-Port in Zugriff bekommt. Falls der OSCam innerhalb dieser Zeit den Port nicht binden kann, terminiert er mit "Bind Request failed". Ursachen dafür sind<br />
* Doppelbelegung von Ports<br />
* Ein vormals abgestürzter OSCam der die Ports nicht wieder freigegeben hat<br />
* OSCam wurde mehrmals gleichzeitig gestartet<br />
<br />
Beispiel:<br />
bindwait = 20 # Wartezeit 20 Sekunden<br />
<br />
Default:<br />
bindwait = 120 # Wartezeit 120 Sekunden<br />
<br />
<br />
==== netprio ====<br />
{{Optional}}<br />
Hier kann die Priorität des Cardservers im Netzwerk festgelegt werden<br />
<br />
Beispiel:<br />
netprio = 1 # Prioritätsstufe 1<br />
<br />
Default:<br />
netprio = 0 # Systembedingte Priorität<br />
<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional}}<br />
Art der DNS-Auflösung. Dies sind zwei verschiedene libc-Aufrufe für die Namensauflösung, weil einige ältere Systeme Probleme mit der moderneren Implementierung ''getadressinfo'' haben bzw. diese Funktion aus ihren Images gestrippt wurden (zB die alte dBox2). Außerdem ist ''getadressinfo'' threadsafe, während ''gethostbyname'' es nicht ist und deshalb locks drumherum im Code benötigt. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Beispiel:<br />
resolvegethostbyname = 1 # Name wird mittels ''gethostbyname'' aufgelöst<br />
<br />
Default:<br />
resolvegethostbyname = 0 # ''getadressinfo'' wird benutzt<br />
<br />
<br />
====failbancount====<br />
{{Optional}}<br />
Failbancount = Anzahl der erlaubten Fehlversuche mit falschen Zugangsdaten. <br />
= 0 (default) IP wird sofort beim ersten Versuch mit unbekannten Zugangsdaten gesperrt!<br />
<br />
Wenn innerhalb '''failbantime''' mehr als in '''failbancount''' erlaubte Versuche registriert wurden, wird die IP für die restliche failbantime gesperrt. Nach Ablauf von failbantime stehen wieder volle failbancount zur Verfügung. Failbancount ist also eine Lockerung der Regeln<br />
<br />
<br />
==== failbantime ====<br />
{{Optional}}<br />
Zeitspanne in Minuten, für die ein Client mit ungültigem Login-Versuch auf IP-Basis geblockt wird.<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP Adresse wird für 5 Minuten geblockt. Neue Loginversuche werden ignoriert auch wenn das Login OK wäre.<br />
# Es wird kein Clientthread erstellt.<br />
<br />
Default:<br />
failbantime = 0 # failban ist ausgeschaltet (default)<br />
<br />
<br />
==== dropdups ====<br />
{{Optional}}<br />
Möglichkeiten zur Duplizierung von Client-Verbindungen. Es wird damit die Reaktion auf den [[OSCam/de/Config/oscam.user#uniq|uniq]]-Parameter festgelegt.<br />
<br />
0 = Markierung des Clienten als Duplikat aber keine Trennung (default)<br />
1 = Abbrechen der Duplikat-Verbindung anstelle einer Markierung als Duplikat<br />
<br />
<br />
==== unlockparental ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7289:08/27/2012</span><br />
<br />
'''Nur Seca und Viaccess'''<br />
<br />
Option zum Ausschalten der Jugendschutzfunktion für Seca und Viaccess Pin Code Anfragen bei adult movies.<br />
Bei Viaccess z.B. für die Redlight Elite HD Smartcard. Mit unlockparental = 0 bleibt Dorcel Dunkel mit 1 wirds hell!<br />
<br />
Beispiel:<br />
unlockparental = 1 # Jugendschutzfunktion ausgeschaltet<br />
<br />
Default:<br />
unlockparental = 0 # Jugendschutzfunktion von Seca und Viaccess eingeschaltet<br />
<br />
<br />
==== double_check ====<br />
{{Optional}}<br />
'''Nur wenn CW double check ausgewählt ist!'''<br />
<br />
ECM wird zu 2 oder mehr Readern mit der selben SC gesandt und die CW's werden gegeneinander verifiziert. lb_nbes_reader muss auf 2 oder höher gesetzt werden.<br />
<br />
Beispiel:<br />
double_check =<br />
<br />
Default:<br />
double_check = 0<br />
<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|erste 2 digits von CAID1],[CAID2|erste 2 digits von CAID2],... = [blank] keine [default]<br />
<br />
ECM wird an 2 oder mehr Reader mit der gleichen SC gesendet und die CW's werden gegen andere definierte CAIDs oder die ersten 2 bytes der CAIDs verifiziert. lb_nbest_readers muss auf 2 oder höher gesetzt sein!<br />
<br />
<br />
==== Loadbalancer ====<br />
===== lb_mode =====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Wenn hier loadbalancing aktiviert wird, dann sind die in oscam.server bei services stehenden Besonderheiten zu beachten. Siehe [[streamboard:wiki/OSCam/de/Config/oscam.server#services|Services]]!<br />
<br />
Loadbalance Mode<br />
<br />
Wenn man zwei oder mehrere gleiche Karten hat (egal ob lokal oder als Proxie), kann man die Last auf diese Karten gleichmäßig verteilen (balancieren).<br />
<br />
Beispiel:<br />
lb_mode = 0 (deaktiviert) (default)<br />
lb_mode = 1 (schnellster Reader zuerst)<br />
lb_mode = 2 (Reader der am längsten nicht geantwortet hat wird genommen)<br />
lb_mode = 3 (Reader mit der geringsten Auslastung wird verwendet)<br />
lb_mode = 10(LB ist ausgeschaltet, Senderstatistik wird trotzdem erstellt)<br />
<br />
Default:<br />
lb_mode = 0 # deaktiviert<br />
<br />
<br />
===== lb_save =====<br />
{{Optional}}<br />
Speichert die Loadbalance Statistik, damit sie auch nach einem Neustart erhalten bleibt.<br />
Um die CPU nicht zu sehr zu belasten, sollte hier ein Wert > 100 eingetragen werden.<br />
<br />
Beispiel:<br />
lb_save = 100 # Anzahl der ECM's nach der die Statistik gespeichert wird<br />
<br />
Default:<br />
lb_save = 0 # Statistik wird nicht gespeichert<br />
<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional}}<br />
Anzahl der Reader, die für die ECM anfragen.<br />
<br />
Beispiel:<br />
lb_nbest_readers = 2 # Anfragen gehen immer an zwei Reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # Anfrage geht nur an einen Reader<br />
<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional}}<br />
Anzahl der Fallback Reader für den Lastenausgleich.<br />
<br />
Beispiel:<br />
lb_nfb_readers = 2 # Zwei Fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1<br />
<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mod<br />
= 0 # Standardverfahren zum (späten) Wiederöffnen blockierender Reader (default)<br />
= 1 # Schnelles Wiederöffnen blockierender Reader<br />
<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5893:08/19/2011</span><br />
<br />
Anzahl der Reader je CAIDs für das Loadbalancing, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Default:<br />
lb_nbest_percaid = 0<br />
<br />
Beispiel:<br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wird so lange blockiert, bis die Statistik aufgeräumt ist<br />
1 = default<br />
<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = öffne alle gestoppten Reader sofort, wenn kein funktionierender Reader gefunden wird<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional}}<br />
Mindestanzahl der ECM's, die für die Auswertung genommen werden.<br />
<br />
Beispiel:<br />
lb_min_ecmcount =<br />
<br />
Default:<br />
lb_min_ecmcount = 5<br />
<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional}}<br />
Maximale Anzahl der ECM's, bevor der Loadbalancer zurückgesetzt wird.<br />
<br />
Beispiel:<br />
lb_max_ecmcount =<br />
<br />
Default:<br />
lb_max_ecmcount = 500<br />
<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional}}<br />
Zeitspanne in Sekunden zwischen neuem Verbindungsversuch zu verlorengegangenen readern/CAIDs/providers/services<br />
<br />
Beispiel:<br />
lb_reopen_seconds = 500 # Nach 500 Sekunden neuer Verbindungsversuch<br />
<br />
Default:<br />
lb_reopen_seconds = 900<br />
<br />
<br />
===== lb_retrylimit =====<br />
{{Optional}}<br />
Verbindungsversuch zum nächsten reader '''nur wenn''' die Antwortzeit höher, als hier festgelegt in '''Millisekunden'''.<br />
<br />
Beispiel:<br />
lb_retrylimit = 500 # Verbindungsversuch zum nächsten reader nur, wenn die Antwortzeit höher als 500 ms ist.<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
<br />
===== lb_savepath ===== <br />
{{Optional}}<br />
Dateiname für die Sicherung der Loadbalancing Statistiken<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional}}<br />
Zeit in Stunden, nach der die Statistiksätze gelöscht werden sollen<br />
<br />
default = 336<br />
<br />
<br />
===== lb_use_locking =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6166:12/28/2011</span><br />
<br />
Unterdrückt parallele und identische ECM-Anfragen<br />
<br />
1 = ein<br />
0 = aus # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* Man sollte diese Option nur anschalten wenn:<br />
** Langsames system<br />
** Hohe Last<br />
**Gleiche ECM Anfragen nicht aus dem Cache kommen, sondern weiter Reader angefragt werden<br />
<br />
* Vorteile aktiviert:<br />
** Durch die Synchronisierung wird ein ECM Request nach dem anderen durchgeführt, die Ermittlung von Cache oder Request und Zuordnung der Reader über den Loadbalancer ist immer erfolgreich<br />
<br />
* Nachteile aktiviert:<br />
** Die Synchronisierung verhindert Multithreading und es kommt eventuell zu höheren Antwortzeiten<br />
<br />
* Vorteile NICHT aktiviert:<br />
** Schnellere Durchlaufzeiten für ECM requests<br />
<br />
* Nachteile NICHT aktiviert:<br />
** Eventuell doppelte (bzw n-fache) ECM requests an die Reader möglich<br />
<br/><br />
<br />
<br />
===== lb_retrylimits =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,CAID2:time2]...<br />
<br />
Begrenzung der Zeit für einen retry des loadbalancing eines CAID in Millisekunden, wildcard CAIDs mit two-digit CAIDs möglich, <br />
<br />
default: [blank]<br />
<br />
Beispiel:<br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
Ignoriere die Providerinformations-CAIDs, um die statistischen Daten zu reduzieren, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Beispiel:<br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx und 34xx)<br />
<br />
default = [blank]<br />
<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # ermöglicht ein automatisches timeout auf der Basis von Statistiken des Loadbalancers<br />
= 0 # default<br />
<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = Prozent<br />
<br />
Prozentwert, mit dem die Timeout-Zeit beaufschlagt wird<br />
default = 30<br />
<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = Millisekunden<br />
<br />
Minimale Zeit in Millisekunden, die zur Timeout-Zeit hinzuaddiert wird<br />
default = 300<br />
<br />
<br />
===== lb_max_readers =====<br />
{{Optional}}<br />
lb_max_readers = limit (Zahl)<br />
<br />
beschränkt die Zahl der Reader während der Lernphase des Loadbalancing<br />
<br />
0 = unbegrenzt (default)<br />
x = beschränkt auf ein Limit von x (Zahl)<br />
<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional}}<br />
lb_auto_betatunnel = 0|1<br />
<br />
Ermöglicht automatisches Betatunneling für Betacrypt (CAIDs 1801, 1833, 1834 und 1835), wenn Loadbalancing verwendet wird<br />
lb_auto_betatunnel = 0 # ausgeschaltet<br />
= 1 # eingeschaltet (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Eintragungen für Betatunnel in oscam.user werden bevorzugt. Siehe [[streamboard:wiki/index.php/OSCam/de/Config/oscam.user#betatunnel|Betatunnel]]<br />
<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
setzt den Mode für das automatische Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only)<br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = Auswahl (Zahl)<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = immer Betacrypt<br />
105 = wählt einen Mittelwert<br />
200 = immer Nagravision<br />
<br />
<br />
=== '''Monitor''' ===<br />
Hier sind nur dann Eintragungen erforderlich, wenn ein Monitor benutzt wird!<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
UDP-Port für den Monitor<br />
port = 0 # Kein Monitor<br />
= # [blank] Portnummer Monitor ausgewählt<br />
<br />
Beispiel:<br />
port = 24480 # Monitor eingeschaltet mit Port 24480<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Service mit einer bestimmten IP-Adresse verbinden<br />
serverip = # IP-Adresse<br />
= # [blank] alle IP's (default)<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Unverschlüsselte Monitorverbindungen.<br />
<br />
Möglich<br />
* eine oder mehrere IP-Einzeladressen<br />
* eine oder mehrere IP-Bereiche<br />
* eine Mischung von IP-Einzeladressen oder IP-Bereichen<br />
<br />
Beispiel<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 und IP-Bereich 192.168.0.0 bis 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] keine unverschlüsselte Monitorverbindung.<br />
<br />
<br />
==== aulow ====<br />
{{Optional}}<br />
Zeitraum in Minuten, in dem keine EMM erscheinen, so dass der Client von "active" auf "on" gesetzt wird.<br />
<br />
Beispiel<br />
aulow = 30 # Nach 30 Minuten ohne EMM wird der Status von "active" auf "on" gesetzt (default).<br />
<br />
<br />
==== monlevel ====<br />
{{Optional}}<br />
Monitor-Level<br />
0 = Kein Zugriff auf Monitor (default)<br />
1 = Nur Server und eigene Prozeduren<br />
2 = Alle Prozeduren, aber nur ansehen<br />
3 = Alle Prozeduren, reload von oscam.user möglich<br />
4 = Unbeschränkter Zugriff<br />
<br />
Beispiel<br />
monlevel = 4 # Kompletter Zugriff<br />
<br />
Monlevel kann durch Eintragungen in oscam.user überschrieben werden!<br />
<br />
<br />
==== hideclient_to ====<br />
{{Optional}}<br />
Zeitspanne in Sekunden für das Ausblenden von Clients, die keine Anfragen senden. Siehe auch Parameter '''httphideidleclienst''' in Abschnitt [webif].<br />
hideclient_to = 40 # Clienten werden nach 40 Sekunden ohne Anfrage ausgeblendet<br />
= 0 # Keine Ausblendung von Clienten im Leerlauf<br />
<br />
<br />
==== appendchaninfo ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8546:03/13/2013</span><br />
<br />
Fügt die Channel-Info aus der oscam.services der Log-Meldung hinzu. Bei Verwendung von Monitor und Webinterface ist dies eine sehr nützliche Routine!<br />
appendchaninfo = 1 # Die Channel-Info wird hinzugefügt<br />
= 0 # Keine Channel-Info (default)<br />
<br />
<br />
=== '''lcd''' ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
<br />
==== lcd_outputpath ====<br />
{{Optional}}<br />
Hier kann ein Pfad für den LCD-Output eingestellt werden<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
<br />
==== lcd_hideidle ====<br />
{{Optional}}<br />
Verbergen eines Readers im LCD-Output während des Leerlaufs<br />
<br />
lcd_hideidle = 1 # Verbergen, wenn der Leerlauf länger als 20 Sekunden dauert<br />
= 0 # default<br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional}}<br />
LCD-Refresh-Interval in Sekunden (Minimum 5 Sekunden)<br />
<br />
Default:<br />
lcd-writeinterval = [blank] 10 Sekunden<br />
<br />
<br />
=== '''WebIf''' ===<br />
Eintragungen sind nur dann erforderlich, wenn das Web-Interface (by Alno) als Modul ausgewählt wurde.<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
<br />
==== Dateiformat zum Senden von EMMs via Webinterface ====<br />
(von Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' <br />
<br />
* Die Datei muß im TXT Format sein.<br />
* Jedes PRE-CAM EMM muss in einer eigenen Zeile vorliegen.<br />
* Die EMMs müssen im HEX Format vorliegen.<br />
** Beispiel: AABBCCDD...<br />
* Leerzeichen und Tabs zwischen den bytes sind erlaubt:<br />
** AA BB CC DD...<br />
* Groß- und/oder Kleinschreibung oder gemischte Schreibweise für jeden HEX-Wert sind erlaubt:<br />
** AA aa Aa aA...<br />
* Andere Zeichen oder Kommentare sind nicht erlaubt.<br />
<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
Port, auf dem das Webinterface hört.<br />
Standard ist Port 8888 wenn kein eintrag erfolgt<br />
<br />
httpport = 83 # Webinterface hört auf '''http-port 83'''<br />
= +83 # Webinterface hört auf '''https-port 83''' (SSL)<br />
0 # Webinterface ist ausgeschaltet<br />
<br />
<br />
==== httpcert ====<br />
{{Optional}}<br />
Datei für das SSL-Zertifikat<br />
httpcert = oscam.cert # (siehe dort!)<br />
= # [blank] es wird die Datei oscam.pem (embedded) verwendet<br />
<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
Beispiel<br />
httpforcesslv3 = 0 (default)<br />
= 1 benutze SSLv3<br />
<br />
<br />
==== httpuser ====<br />
{{Mandatory}}<br />
Name des Users für den Zugriffsschutz. Es wird zwar [blank] als Default-Wert angeboten. Davon wird aber dringend abgeraten; daher wird dieser Parameter hier als '''zwingend''' beschrieben.<br />
httpuser = # xyxyxy<br />
<br />
<br />
==== httppwd ====<br />
{{Mandatory}}<br />
Passwort für den Zugriffsschutz. Es gilt das gleiche wie für httpuser.<br />
httppwd = # 123456<br />
<br />
'''Die Parameter ''user'' und ''pwd'' werden beim Verbindungsaufbau zum Webinterface in einem Kontrollfenster abgefragt. Fehlen sie oder sind sie fehlerhaft, erfolgt die Meldung ''Forbidden'' und der Verbindungsaufbau wird abgebrochen!'''<br />
<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6825:05/15/2012</span><br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Füge den content des embedded CSS '''nicht vor''' dem content des user-css ein (default)<br />
1 # Embedded CSS wird '''vor''' dem externen CSS hinzugefügt(siehe nächsten Parameter: [[#httpcss|httpcss]])<br />
<br />
Dieser Parameter kann dazu benutzt werden, den embedded CSS mit custom styles zu überschreiben. Die laufenden CSS styles können hier angeschaut werden: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
<br />
==== httpcss ====<br />
{{Optional}}<br />
Für das Webinterface stehen verschiedene Styles in unterschiedlicher farblicher und graphischer Darstellung zur Verfügung. Der User kann die für ihn interessanten Style-Dateien (.css) speichern und je nach "Stimmung" verwenden. Hier wird der Pfad zu den Style-Dateien festgelegt.<br />
<br />
Beispiel<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] es wird der embedded Style verwendet (default)<br />
<br />
Styles werden hier veröffentlicht: [[streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
<br />
==== httptpl ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7083:06/25/12</span><br />
<br />
Pfad für externe templates und picons<br />
httptpl =<br />
= # [blank] Keine externen Templates<br />
<br />
Multiple simultane templates und picons können durch die Anlage von Unterordnern (mit max. 32 alphanumerischen Zeichen) zur Verfügung gestellt werden. Der Name des Unterordners korrespondiert mit dem Unterordner in der URL, default : [blank]<br />
<br />
Beispiele<br />
<br />
httptpl = /this/is/my/path <br />
<br />
Ordner mit multiplen templates: <br />
/this/is/my/path/template1 <br />
/this/is/my/path/template2 <br />
<br />
gültige URLs: <br />
http://host:port/template1 <br />
http://host:port/template2 <br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httpoverwritebakfile ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = überschreibe backup configurations files (*.bak)<br />
0 = default<br />
<br />
<br />
==== httplocale ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
hier kann ein "locale environment" gesetzt werden.<br />
<br />
default = [blank] kein environment<br />
<br />
Siehe auch hier:<br />
<br />
http://de.wikipedia.org/wiki/locale<br />
<br />
<br />
==== httpjscript ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
Path für oscam.js javascript, default : [blank]<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional}}<br />
Aktualisierungszeit in Sekunden, in der die (kompletten) Seiten des Webinterfaces aktualisiert werden<br />
httprefresh = 7 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httppollrefresh ====<br />
{{Optional}}<br />
<br />
Initialisierungszeit des Pollings und Aktualisierungszeit, in der diverse Daten des Webinterfaces neugeladen werden (Zeit kann auf den entsprechenden Seiten geändert werden)<br />
httppollrefresh = 60 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httpshowpicons ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # zeige picons in userlist<br />
0 # default<br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httphideidleclients ====<br />
{{Optional}}<br />
Dieser Parameter ermöglicht es, einen Clienten nach Ablauf der im Parameter '''hideclient_to''' im Abschnitt [monitor] festgelegten Leerlauf-Zeitspanne (siehe dort!) auszublenden.<br />
httphideidleclients = 1 # Ausblenden<br />
= 0 # Nicht ausblenden (default)<br />
<br />
==== httphidetype ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
Buchstabe der definiert, welcher type in der type-column auf der Statusseite des Webinterfaces versteckt werden soll. <br />
s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
<br />
==== httpscript ====<br />
{{Optional}}<br />
Pfad für Skripte, die vom Webinterface aus gestartet werden können<br />
httpscript = # Pfad<br />
= # [blank] kein Pfad<br />
<br />
<br />
==== httpallowed ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8842:08/17/2013</span><br />
<br />
Hier werden IP-Addressen, IP-Bereiche oder beides festgelegt, die auf das Webinterface zugreifen dürfen. Es wird zwar auch ein [blank] als Default-Wert angeboten, dessen Sinn sich aber nicht erschließt! Wenn das Webinterface benutzt werden soll, dann muss es auch die Möglichkeit geben, sich mit ihm zu verbinden. Daher wird dieser Parameter als '''zwingend''' dargestellt.<br />
<br />
Wenn ein localhost nach '''IPv6''' aufgelöst werden soll, muss die Zeile mit '''::1''' abgeschlossen werden!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
Beispiel<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen <br />
und werden nach IPv6 aufgelöst<br />
'''Default Werte'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255,::1<br />
<br />
<br />
==== httpdyndns ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6558:03/21/12</span><br />
<br />
Zulassen von DYNDNS-Verbindungen durch das Webinterface.<br />
<br />
httpdyndns = hostname[,hostname][,hostname]<br />
<br />
Beispiel<br />
httpdyndns = host1.exemple.com, host2.exemple.com<br />
<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional}}<br />
Sicherung der Konfigurationsdateien<br />
httpsavefullcfg = 0 # alle nicht leeren Parameter,<br />
# alle nicht Default-Parameter,<br />
# alle Parameter, die nicht den gleichen Inhalt enthalten wie dieselben Parameter in [global] (default).<br />
1 # alle Parameter<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional}}<br />
<br />
Über das Webinterface können in bestimmtem Unfang Konfigurations-Dateien editiert und gesichert werden. Das ist für den Server-Admin, der sich nicht immer in der Nähe zur Konsole des Servers befindet, sehr vorteilhaft. Wenn aber weitere User oder andere Beteiligte ebenfalls Zugang zum Webinterface und damit Zugriff auf die Daten haben, kann das zu einem Problem werden. Die Möglichkeit des Editierens (Schreibens) kann daher mit diesem Parameter ausgeschaltet werden.<br />
httpreadonly = 1 # nur Lesezugriff möglich<br />
= 0 # alles ist möglich (default)<br />
<br />
<br />
==== httpiconpath ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9463/01/28/2014</span><br />
<br />
httpiconpath = path<br />
<br />
Pfad zur Picon-Datei, default [blank] none<br />
<br />
<br />
==== httphelplang ====<br />
{{Mandatory}}<br />
httphelplang = de|en|fr|it<br />
<br />
Auswahl der Sprache für die Kontexte<br />
<br />
de = deutsch<br />
en = englisch<br />
fr = französisch<br />
it = italienisch<br />
[blank] = englisch (default)<br />
<br />
<br />
==== httposcamlabel ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
Setzt ein individuelles label für den header des Webinterfaces, default: OSCam rXXXX<br />
<br />
<br />
=== '''Cache''' ===<br />
{{OSCamConfCacheParameter}}<br />
<br />
<br />
==== delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
<br />
==== max_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
max_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clientanfrage im Cache verbleiben. Die Zeit muß 3,5 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
==== max_hit_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8910:09/10/2013</span><br />
<br />
max_hit_time = in Sekunden<br />
<br />
Maximale Zeit, die Treffer für cache exchange im cache verbleiben müssen um wait_time zu evaluieren, default: 15<br />
<br />
<br />
==== wait_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Wartezeit und Dynamische Wartezeit in Millisekunden für cache exchange und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
<br />
= [blank] none (default)<br />
<br />
'''Info:'''<br />
awtime --> Zeit die bei jeder Anfrage gewartet wird (always wait time)<br />
dwtime --> Zeit die bei positivem Fund eines CWs im Cache gewartet wird (dynamic wait time)<br />
<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
<br />
Verwendungspraxis:<br />
wait_time = 098C:5:130,09C4:5:130,1702:5:1900,1830:5:490,1843:5:490,0D05:5,0B00:5<br />
<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional}}<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode (bestimmt die Verwenung des Parameters ''counter'')<br />
<br />
0 = Falls ''wait_time'' abgelaufen ist, sende das CW mit dem höchsten counter an die clients<br />
1 = Niemals ein CW (von cacheex) aus dem cache versenden, wenn der counter aus dem cacheex den in diesem Parameter <br />
gesetzten counter nicht erreicht. Falls ''wait_time'' erreicht ist, geht der request an normale reader. <br />
Nur wenn ein CW den gesetzten counter erreicht, wird es an die clients gesendet.<br />
Default = 0<br />
<br />
<br />
* counter (bestimmt den counter des CW, der mindestens erreicht werden muss, um versendet zu werden)<br />
<br />
Default = 1 (benutze das CW mit dem höchsten counter aus dem cache)<br />
<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = erlaube bad cw's von einem festgelegten fallback reader. Default = 0<br />
<br />
<br />
'''Info:'''<br />
<br />
Bei '''aktiviertem''' Parameter wird bei einem bad CW die Anfrage an den fixed Fallback weitergeleitet<br />
und somit ein freetzer meist verhindert.<br />
<br />
<br />
Siehe --> [[OSCam/de/Config/oscam.server#fallback|fallback]]<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== csp_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von CSP-Nodes hört<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Lokale Bind-IP für csp_port (siehe oben)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 ausgeschaltet (default)<br />
= 1 eingeschaltet<br />
<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Für NDS Karten nur in einer light Version verfügbar''' <br />
<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID, für die der CW-Cycle-Check ermöglicht werden soll, [blank] = kein Check (Default)<br />
<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = Zahl<br />
<br />
Maximum von CW-Cycle-Entries in die Liste, default = 500, maximum = 4000<br />
<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = Minuten<br />
<br />
Minimalzeit, die ein erkannter Cycle in der Memory verbleiben soll, default = 15, maximum = 240<br />
<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = ungültige CW-Cycle kommen nur ins Log <br />
1 = ungültige CW-Cycle werden gedropped (default)<br />
<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, 1 = alte CW-Cycle werden gedropped, 0 = kein Dropping (default)<br />
<br />
<br />
==== cwcycle_sensitive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (oder mehr) gleiche bytes und drop neues CW<br />
3 = 3 (oder mehr) gleiche bytes und drop neues CW<br />
4 = 4 (oder mehr) gleiche bytes und drop neues CW<br />
<br />
--> Höherer Wert entspricht höherer Empfindlichkeit<br />
<br />
<br />
==== cwcycle_usecwcfromce ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = benutze CW Info aus cache exchange<br />
0 = default<br />
<br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
antworte, wenn das cache exchange timeout erreicht ist und keine normalen Reader zur Verfügung stehen, die ECM's senden:<br />
<br />
0 = sende sofort '''not found''' an den client (default)<br />
1 = warte auf eine Antwort für cache exchange bis der timeout für den client erreicht ist<br />
<br />
<br />
=== '''csp (UDP''') ===<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:02/16/2013 Siehe Section '''[cache]'''!</span><br />
<br />
Abschnitt nur dann erforderlich, wenn csp als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von csp-nodes hört<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
Local Bind IP für den oben genannten UDP-Port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== wait_time ====<br />
{{Mandatory}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET Siehe Section '''[cache]'''!</span><br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8060:01/04/13</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8077:01/06/13</span><br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
= [blank] none (default)<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
Wartezeit in Millisekunden für cache exchange ('''nur mode 2&3''') und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
=== '''Camd 33 (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn camd33 als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd 33 Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein Adressbereich, der unverschlüsselt übertragen wird.<br />
<br />
Beispiel:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt =<br />
<br />
<br />
==== passive ====<br />
{{Optional}}<br />
Definition für aktiven oder passiven Client. Generell geht das Camd3.3x-Protokoll von einem aktiven Client aus. Es kann aber unter bestimmten Umständen bei manchen Clients (meistens plugin) zur Schwierigkeiten kommen. In diesem Fall<br />
<br />
Beispiel:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
<br />
==== key ====<br />
{{Optional}}<br />
<br />
Schlüssel, der für die Verschlüsselung verwendet wird. (128bit Verschlüsselung)<br />
<br />
Beispiel:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key =<br />
<br />
<br />
=== '''cs357x (UDP)''' ===<br />
Abschnitt nur dann erforderlich, wenn cs357x als Client Protokoll verwendet wird.<br />
Dieses Protokoll verschlüsselt grundsätzlich und bildet den Schlüssel aus dem Benutzernamen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:'''<br />
'''cs357x''' wurde auch als '''camd35''' bezeichnet. Beide Bezeichnungen meinen das gleiche Protokoll mit den gleichen Funktionsweisen und Parametern. Künftig wird zur Vermeidung von Irritationen '''nur noch cs357x''' verwendet.<br />
<br />
Eine genauere Erklärung für UDP findet Ihr hier [http://de.wikipedia.org/wiki/User_Datagram_Protocol]<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus cs357x Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs357x -clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Tread]]<br />
<br />
<br />
=== '''cs378x''' (TCP) ===<br />
Abschnitt nur dann erforderlich, wenn cs378x als Client Protokoll notwendig ist.<br />
<br />
Eine ausführliche Erklärung von TCP findet Ihr hier [http://de.wikipedia.org/wiki/Transmission_Control_Protocol]<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein das OSCam nur antwortet wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs3.78x-clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
<br />
=== '''Newcamd (TCP)''' ===<br />
Abschnitt nur dann erforgerlich, wenn newcamd als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
<br />
==== key ====<br />
{{Mandatory}}<br />
Schlüssel für die Newcamd Verbindung zum Client.<br />
<br />
Beispiel:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Newcamd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000@1234:000000 # (CAID 1234 ist über Port 15000 erreichbar)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 ist über Port 15000 erreichbar CAID 5678 über Port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Hat der Server mehrere IP Adressen werden nur Anfragen die an die konfigurierte IP gehen beantwortet.<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein bestimmter IP Bereich der sich auf den Newcamd Server verbinden darf.<br />
<br />
Beispiel:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed =<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
Der Server versucht, die Newcamd Verbindung am leben zu halten.<br />
<br />
Beispiel:<br />
keepalive = 1 # (aktiviert)<br />
keepalive = 0 # (deaktiviert)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
<br />
==== mgclient ====<br />
{{Optional}}<br />
Aktiviert das Extendet Newcamd Protokol, um mehrer CAID's über einen Port zu schicken<br />
<br />
Beispiel:<br />
mgclient = 1 # (aktiviert)<br />
mgclient = 0 # (deaktiviert)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br />
=== '''scam''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9878:09/29/2014</span><br />
<br />
Abschnitt nur dann erforderlich, wenn scam als Client-Protocol verwendet wird.<br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
port = port<br />
<br />
UDP-Port für scam server, default = 0<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
=== '''Radegast''' ===<br />
Abschnitt nur dann erforderlich, wenn Radegast als Client-Protokoll notwendig ist.<br />
<br />
{{OSCamConfRadegastParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
TCP/IP-Port für Radegast-Clients. Mit dem Eintrag wird das Radegast-Protokoll enabled.<br />
port =<br />
= 0 (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
<br />
Username des Radegast-Client<br />
user = username<br />
<br />
<br />
=== '''Serial''' ===<br />
Abschnitt nur dann erforderlich, wenn eine serielle Reader-Schnittstelle notwendig ist.<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
<br />
==== device ====<br />
{{Optional}}<br />
<br />
Parameter der Device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = Name der Serial Device<br />
option = timeout = Millisekunden Timeout für die Verbindung default: 50<br />
= delay Millisekunden Zusätzliche Verzögerung zwischen 2 Characters<br />
<br />
Unterstützte Serial Devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
<br />
=== '''Cccam (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn Cccam als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCccamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6206:01/07/2012</span><br />
<br />
TCP/IP-Ports für CCcam-Clients. Mit dem Eintrag eines oder mehrerer Ports wird das CCcam-Protokoll enabled.<br />
<br />
port = 0|port[,port...]<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled<br />
<br />
<br />
==== version ====<br />
{{Optional}}<br />
Definiert die Version von CCcam, mindestens Version 2.0.11, Default-Wert = 0<br />
<nowiki><main version>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
version = 2.0.11<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
==== reshare ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Reshare-Level<br />
-1 = kein Resharing<br />
0 = nur Reshare für Direct-Peer<br />
1 = Reshare für Direct-Peer und den nächsten Level<br />
x = Reshare für Direct-Peer und die nächsten x Level (x steht für die Zahl der Level)<br />
<br />
Beispiel<br />
reshare = 1 Reshare nur für Direct-Peer und den nächsten Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
==== reshare_mode ====<br />
{{Optional}}<br />
Arten des reshare:<br />
0 = reader reshared nur empfangene SCs für CCcam-reader<br />
1 = reader reshared empfangene SCs (wie=0) und definierte services<br />
2 = reader reshared nur definierte reader-services als virtueller SC<br />
3 = reader reshared nur definierte user-services als virtueller SC<br />
<br />
<br />
==== ignorereshare ====<br />
{{Optional}}<br />
CCcam Reshare-Einstellungen<br />
0 = benutze die Reshare-Einstellungen des Servers (default)<br />
1 = benutze die Reshare-Einstellungen des Readers oder Users<br />
<br />
Beispiel<br />
ignorereshare = 1 Die Reshare-Einstellungen des Readers oder Users werden benutzt<br />
<br />
<br />
==== stealth ====<br />
{{Optional}}<br />
Versteckt aktive user und das extended OSCam-Protokoll. Schützt andere OSCam-user davor, den Server als OSCam-Server zu entdecken!<br />
stealth = 1 # Tarnung eingeschaltet<br />
= 0 # Tarnung aus (default)<br />
<br />
<br />
==== minimizecards ====<br />
{{Optional}}<br />
Modus der Verbindung von CCcam-Servern zu CCcam-Clienten<br />
0 = Keine Aggregation, nur Duplikate werden entfernt (default)<br />
1 = Basierend auf Minimum-Hop: zwei SC's mit unterschiedlichen hops werden zusammengefasst, neue SC's bekommen einen kleineren hop<br />
2 = Aggregation auf CAIDs basierend: alle SC's mit der gleichen CAID werden zusammengefasst, Provider wird entfernt<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional}}<br />
Interval in Sekunden zur Verteilung der share list updates an die Clienten.<br />
<br />
0 = Update basiert auf Server-Updates, Werte kleiner als 10 sind ungültig und werden auf 30 gesetzt.<br />
= [blank) 240 (default)<br />
<br />
<br />
==== keepconnected ====<br />
{{Optional}}<br />
CCcam Keepalive-Modus:<br />
0 = Trenne Client, wenn die maximale Leerlaufzeit (idletime) erreicht ist<br />
1 = Halte die Verbindung (default)<br />
<br />
<br />
==== recv_timeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7672:10/09/2012</span><br />
<br />
recv_timeout = Millisekunden<br />
<br />
hier kann ein network-timeout beim Empfang von Daten gesetzt werden<br />
default = 2000<br />
<br />
<br />
==== forward_origin_card ====<br />
{{Optional}}<br />
forward_origin_card = 0|1<br />
<br />
Weiterleitung des ECM-Requests an den reader, der diese Karte hat.<br /><br />
Loadbalancer und Caching werden dabei deaktiviert.<br />
<br />
1 = Weiterleitung eingeschaltet<br />
0 = Aus (default)<br />
<br />
<br />
==== nodeid ====<br />
{{Optional}}<br />
nodeid = ID<br />
<br />
setzt CCcam node ID in '''hex''', <br />
<br />
default:none<br />
<br />
Beispiel:<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br />
Wenn eine nodeid benutzt wird, dann wechselt der Server das Protokol von "cccam ext" zu "cccam".<br />
<br />
<br />
=== '''Pandora''' ===<br />
{{OSCamConfPandoraParameter}}<br />
==== pand_skip_send_dw ====<br />
pand_skip_send_dw = dummy<br />
<br />
==== pand_allowed ====<br />
pand_allowed = dummy<br />
<br />
==== pand_usr ====<br />
pand_user = dummy<br />
<br />
==== pand_pass ====<br />
pand_pass = dummy<br />
<br />
==== pand_ecm ====<br />
pand_ecm = dummy<br />
<br />
==== pand_port ====<br />
pand_port = dummy<br />
<br />
==== pand_srvid ====<br />
pand_srvid = dummy<br />
<br />
<br />
=== '''GBox''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
{{OScamConfGboxParameter}}<br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBox läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
===== my_password =====<br />
{{Mandatory}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
Passwort = 4 hex bytes, 8 chara<br />
<br />
Mein Passwort<br />
<br />
Beispiel<br />
98AF3E25<br />
<br />
==== hostname ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
hostname = eigene IP oder hostname<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
port = port[,port]... udp ports, die die gbox überwacht<br />
<br />
<br />
==== proxy_card ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy_Card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
proxy reader SmartCard(s), die mit gbox network reshared werden, default = none<br />
<br />
<br />
==== ccc_reshare ====<br />
{{Optional}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = cccam Karten können ins gbox Netzwerk transportiert werden , default = 0 (global setting)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Caid der Karten müssen in 'ccc_gbx_caid =' spezifiziert werden<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Der Share Level für jeden peer wird spezifiziert in oscam.server [reader]-> cccam_reshare<br />
<br />
<br/><br />
<br />
==== ccc_gbx_caid ====<br />
{{Optional}}<br />
<br />
ccc_gbx_caid = caid_1,caid_2,...<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' 'ccc_reshare' muß zusätzlich gesetzt werden<br />
<br />
<br/><br />
<br />
<br />
==== my_vers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9645:04/09/2014</span><br />
<br />
my_vers = version<br />
<br />
hier kann das low byte (hex) der eigenen gbox version gesetzt werden<br />
<br />
default = 2A<br />
<br />
==== my_cpu_api ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9712:05/11/2014</span><br />
<br />
my-cpu_api = byte<br />
<br />
Setze CPU und API Byte in hexadecimal<br />
default = 40<br />
<br />
<br />
==== gbox_reconnect ====<br />
{{Optional}}<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min=60, max=300<br />
<br />
==== gsms_disable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9714:05/11/2014</span><br />
<br />
gsms_disable = 0|1<br />
<br />
schaltet gbox short message service (GSMS) aus, <br />
default = 1<br />
<br />
==== tmp_dir ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/2014</span><br />
<br />
tmp_dir = path<br />
<br />
tempory directory für gbox<br />
<br />
default = /tmp/.oscam<br />
<br />
=== '''DVBapi''' ===<br />
{{Optional}}<br />
Abschnitt nur dann erforderlich, wenn OScam auch als Client zum entschlüsseln eingesetzt werden soll.<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional}}<br />
DVBapi zum lokalen Entschlüsseln verwenden<br />
<br />
Beispiel:<br />
enabled = 0 # (deaktiviert)<br />
enabled = 1 # (aktiviert)<br />
<br />
Default:<br />
enabled = 0<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
Hier wird der User festgelegt, dieser sollte in der oscam.user angelegt sein.<br />
<br />
Beispiel:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
<br />
==== au ====<br />
{{Optional}}<br />
Autoupdate für DVB API aktivieren/deaktivieren.<br />
Abhängig vom verwendeten User aus der oscam.user und dessen au Einstellungen.<br />
<br />
Beispiel:<br />
au = 0 # AU deaktiviert (default)<br />
au = 1 # AU aktiviert<br />
<br />
<br />
==== pmt_mode ====<br />
{{Optional}}<br />
Beispiel:<br />
pmt_mode = 0 # (verwendet camd.socket und PMT Datei)<br />
pmt_mode = 1 # (deaktiviert PMT Datei)<br />
pmt_mode = 2 # (deaktiviert camd.socket)<br />
pmt_mode = 3 # (liest PMT nur beim Start ein)<br />
pmt_mode = 4 # (do not use signal handler for monitoring /tmp)<br />
pmt_mode = 5 # (do not use signal handler for monitoring /tmp & disable camd.socket)<br />
<br />
Default:<br />
pmt_mode = 0<br />
<br />
<br />
==== request_mode ====<br />
{{Optional}}<br />
CAID request mode: <br />
<br />
Beispiel:<br />
request_mode = 0 # versuche alle möglichen CAIDs nacheinander (default) <br />
request_mode = 1 # versuche alle CAIDs simultan<br />
<br />
<br />
==== listen_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP IP port für SAT IP clients. Die Filterung muss auf der Client-Seite erfolgen!<br />
<br />
0 = disabled (default)<br />
<br />
<br />
==== boxtype ====<br />
{{Mandatory}}<br />
Verwendete Box auf der DVB API aktiviert wurde.<br />
<br />
Beispiel:<br />
boxtype = ufs910<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt||qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
Hinweis:<br />
pc steht für generic pc support (laufend supported bei VDR mit vdr-plugin-dvbapi)<br />
<br /><br />
<br />
==== cw_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
cw_delay = in Millisekunden<br />
<br />
Delay beim Schreiben des CW. default = [blank] kein Delay<br />
<br />
<br />
==== delayer ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6808:05/14/2012</span><br />
<br />
delayer = Millisekunden<br />
<br />
Minimum der Zeit, um CW zu schreiben. default: 0<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
<br />
Öffnet die demux-device nach jedem Kanalwechsel neu, default = 0<br />
<br />
<br />
==== decodeforever ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = versuche dauernd auf allen CAIDs zu decodieren<br />
0 = default<br />
<br />
<br />
==== ecminfo_type ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10722:06/13/2015</span><br />
<br /><br />
Definiert die Syntax der Ausgabe in die ecm.info . <br />
<br />
ecminfo_type = 0|1|2|3|4|5 <br />
<br />
Die möglichen Werte bedeuten:<br /><br />
0 - normale oscam syntax<br />
1 - normale oscam syntax, aber die ECMTime wird in Millisekunden anstatt Sekunden angezeigt<br />
2 - wicardd (*1)<br />
3 - mgcamd<br />
4 - cccam<br />
5 - camd3<br />
<br />
(*1)Beispiel:<br /><br />
system: Nagra<br /><br />
caid: 0x1830<br /><br />
pid: 0x1CCE<br /><br />
prov: 000000<br /><br />
cw0: FF A3 7F F1 B8 29 E7 C8<br /><br />
cw1: CB E1 A3 D3 EF FE EF C0<br /><br />
Signature OK<br /><br />
source: ServerXY (cs378x at server:12345)<br /><br />
418 msec -- Sun Jun 14 18:55:37 2015<br /><br />
<br /><br />
<br />
==== read_sdt ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10766:06/15/15</span><br />
<br />
Durch diese Option kann Oscam (mittels Dvbapi) automatisch Kanalname und Providername in die oscam.srvid bzw oscam.srvid2 sowie oscam.provid eintragen. Dazu muss man mindestens 30 Sekunden auf einem Kanal verweilen. Dabei werden allerdings nur noch nicht vorhandene Namen hinzugefügt, bereits vorhandene Einträge in den Dateien werden nicht verändert. So behält man die volle Kontrolle über den Inhalt der Dateien.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = ausgeschaltet (default)<br />
1 = eingeschaltet, aber FTA-Kanäle nicht verarbeiten<br />
2 = eingeschaltet, auch FTA-Kanäle verarbeiten<br />
<br />
==== write_sdt_prov ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10841:06/27/15</span><br />
<br />
Mit dieser Option kann man einstellen, ob die Providernamen zusätzlich in die oscam.srvid bzw oscam.srvid2 eingetragen werden sollen. Dies ist nicht unbedingt erforderlich, weil der Providername automatisch aus der oscam.provid ausgelesen wird. Für diese Option ist das Einschalten von read_sdt erforderlich.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = ausgeschaltet, Providernamen nicht in die oscam.srvid bzw oscam.srvid2 eintragen (default)<br />
1 = eingeschaltet, Providernamen eintragen<br />
<br />
=== '''Anticasc''' ===<br />
Abschnitt nur dann erforderlich, wenn Anticascading als Schutz vor unbefugtem Weiterreichen von Cardsharing angewendet werden soll.<br />
<br />
{{OSCamConfAnticascParameter}}<br />
<br />
<br />
==== enabled ====<br />
{{Mandatory}}<br />
Hiermit wird Anticascading eingeschaltet.<br />
enabled = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== numusers ====<br />
{{Optional}}<br />
Zahl der User, die je Account zugelassen sind.<br />
numusers = 1 # Es ist ein User je Account zugelassen<br />
= 0 # Anticascading ausgeschaltet (default)<br />
<br />
<br />
==== sampletime ====<br />
{{Optional}}<br />
Zeit in Minuten für das Sammeln der Anfragen<br />
sampletime = 5 # Zeitraum von 5 Minuten<br />
= # [blank] Default-Wert 2 Minuten<br />
<br />
<br />
==== samples ====<br />
{{Optional}}<br />
Zahl der Anfragen über dem Limit (mögliche Werte zwischen 2 und 10)<br />
samples = 7 # Limit bei 7 Anfragen<br />
= # [blank] Default-Wert 10 Anfragen<br />
<br />
<br />
==== penalty ====<br />
{{Optional}}<br />
Strafe für den Sünder<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
<br />
Die Strafe kann in der oscam.user überschrieben werden! <br />
<br />
'''Hinweis:''' Fake-CW`s schaden nicht nur demjenigen, dem sie schaden sollen, sondern allen anderen im Share, denn weder oscam noch cccam kann Fake-CW`s von realen CW`s unterscheiden. Wenn also ein Sharepartner von uns ein Fake-CW bekommt und der es dann für 7 Sekunden im cache hat, kann das durch cache2-Hits unbegrenzt an weitere Sharepartner gehen, auch trotz Einstellung von cccmaxhops = 0. Es haben dann unzählige User plötzlich für 7 Sekunden einen Freezer und keiner weiss, warum. Man schadet so also unbewusst allen Sharepartnern, auch denen, mit denen man nicht direkt shart!<br />
<br />
Beispiel<br />
penalty = 3 # Sende korrekte CWs zeitversetzt<br />
<br />
<br />
==== aclogfile ====<br />
{{Optional}}<br />
Dateiname für das AC-Log<br />
aclogfile =<br />
= # [blank] Kein Logfile (default)<br />
<br />
<br />
==== fakedelay ====<br />
{{Optional}}<br />
Fake-Verzögerung in Millisekunden (mögliche Werte zwischen 100 und 3000)<br />
<br />
Beispiel<br />
fakedelay = 500 # Verzögerung von 500 Millisekunden<br />
= # [blank] Default-Wert 1000 Millisekunden<br />
<br />
<br />
==== denysamples ====<br />
{{Optional}}<br />
Wieviel Samples sollen bestraft werden?<br />
<br />
Beispiel<br />
denysamples = 10 # Ab 10 Samples wird bestraft<br />
= # [blank] Default-Wert 8 Samples<br />
<br />
==== acosc_enabled ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
'''Vorbemerkung:'''<br />
mit den nachfolgenden acosc-Parametern wir ein Anticascading über das Zählen der SIDs ('''a'''nticascading '''o'''ver '''s'''id '''c'''ount) ermöglicht.<br />
<br />
acosc_enabled = 0|1<br />
1 = ermöglicht anticascading over SIDs count<br />
0 = default<br />
<br />
<br />
==== acosc_max_active_sids ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = Anzahl<br />
<br />
Maximum aktiver SIDs bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden!<br />
<br />
<br />
==== acosc_zap_limit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = Anzahl<br />
<br />
Zap-Limit bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
Strafe für den Sünder bei Anticascading over SIDs count:<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = Sekunden<br />
<br />
Dauer der Strafe bei Anticascading over SIDs count:<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
==== acosc_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_delay = Millisekunden<br />
<br />
Verzögerung bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.conf&diff=13527
OSCam/de/Config/oscam.conf
2020-02-24T17:20:37Z
<p>Felixka: /* GBox */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.conf''' ==<br />
Dies ist die Hauptkonfigurationsdatei für OSCam. Sie enhält globale Parameter z.B. für das Debuggen, Loggen und den Loadbalancer, sowie einzelne Sektionen für Sondereffekte wie z.B. den Monitor, das Web-Interface, die Protokolle, das DVBapi und das Anti-Cascading. Nur die Sektion [global] ist Pflichtbestandteil, alle übrigen Sektionen sind optional (also nur bei Bedarf) zu verwenden.<br />
<br />
<br />
=== '''Globale Parameter''' ===<br />
Folgende Parameter gibt es im [global] Abschnitt:<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Ist ein Parameter leer oder wird er nicht im Konfigurationsfile angeführt dann gelten die Default-Werte!<br />
<br />
<br />
==== nice ====<br />
{{Optional}}<br />
'''Systempriorität'''. OSCam benötigt fast keine CPU-Leistung. Wenn aber CPU-Leistung benötigt wird, sollte diese sofort zur Verfügung stehen. Werte von 20 bis -20 sind möglich, wobei 20 gering und -20 sehr hoch ist. Wird der Parameter auskommentiert(#), wird diese Funktion nicht ausgerufen. Das ist wichtig z.B. für die dbox 2[http://de.wikipedia.org/wiki/DBOX2], wenn die Fehlermeldung "''relocation error:setpriority''" erscheint. Vgl. [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Beispiel:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
<br />
===== pidfile =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8176/01/24/2013</span><br />
<br />
pidfile = filename, <br />
<br />
ändere den Namen für das pidfile und den Speicherort,<br />
mit [blank] none (default)erfolgt die Speicherung als oscam.pid in /tmp<br />
<br />
Beispiel:<br />
pidfile = /var/run/oscam.pid<br />
<br />
<br />
===== logfile =====<br />
{{Optional}}<br />
Mit diesem Parameter wird Name und Pfad und für das Logfile (mehrere sind nicht möglich) festgelegt, zusätzlich auch das Loggen in stdout oder syslog. Es ist auch möglich, das Loggen nur für stdout oder syslog festzulegen und somit keine Logdatei zu schreiben.<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
Möglichkeiten:<br />
logfile = /var/log/oscam.log # Datei oder Linuxdevice (z.B. /dev/tty)<br />
logfile = syslog # Die Ausgabe wird an den syslogd übergeben<br />
logfile = stdout # Bildschirmausgabe<br />
<br />
Beispiel:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format des logfile:<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timed out<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
<br />
===== ecmfmt =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8056:01/03/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
definiert ECM log format, default:c@p/i/s/l:h:Y:t <br />
<br />
mögliche Variablen: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and cccam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , diese ID wird durch die Tierbeschreibung aus der oscam.tiers (falls vorhanden) ersetzt<br />
w = CW<br />
y = Payload (kurz, 3 Bytes)<br />
Y = Payload (lang, 6 Bytes)<br />
<br />
benutze einen Wert als Prefix, um eine Variable mit diesem Wert zu verbergen<br />
<br />
Beispiel:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w <br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn10048:11/30/13/2013</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs werden eingefügt, wenn CWs nicht ein ungleiches oder gleiches Muster haben (default)<br />
1 = disabled<br />
<br />
<br />
===== loghistorysize =====<br />
{{Optional}}<br />
loghistorysize = bytes<br />
<br />
Größe der Log-Messages-History im WebIf oder Monitor in Bytes<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) # ist nur wirksam, wenn '''preferlocalcards = 1''' in der [global] section gesetzt ist, sonst unter stage 3!<br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
Beispiel:<br />
<br />
P/2/2/2 oder L/2/4/4<br />
<br />
<br />
===== maxlogsize =====<br />
{{Mandatory}}<br />
<br />
Hier kann die maximale Größe des Logfiles in KBytes festgelegt werde. Das ist besonders wichtig für Server mit nur geringem Speicherumfang (z.B. auf dbox2). Darum wird dringend empfohlen, bei solchen Servern diese Größe sorgfältig zu bestimmen. Nicht selten "platzt" ein System, weil die Logfiles unkontrolliert riesige Ausmaße angenommen haben!<br />
<br />
Beispiel<br />
maxlogsize = 20 # Logfile geht bis zu 20 KBytes<br />
= 0 # Logfile erhält '''unbegrenzte''' Größe<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile geht bis zu 10 KBytes (default)<br />
<br />
<br />
===== logduplicatelines =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8290/02/05/2013</span> <br />
<br />
logduplicatelines = 0|1<br />
<br />
= 1 schaltet das Schreiben von Duplikatzeilen im Logfile aus<br />
= 0 schaltet das Schreiben von Duplikatzeilen im Logfile ein = default<br />
<br />
<br />
===== disablelog =====<br />
{{Optional}}<br />
Schaltet Logfile<br />
1 = Ausschalter ein, also '''kein''' Log - puh ;-) -<br />
0 = Ausschalter aus, also '''ein''' Log<br />
<br />
Beispiel:<br />
disablelog = 1 # es wird '''kein''' Log erstellt<br />
<br />
Default:<br />
disablelog = 0 # es wird '''ein''' Log erstellt<br />
<br />
<br />
===== cwlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für CW-Logging eingestellt werden. Der Pfad ist relativ zum Workdirectory und muss existieren, sonst werden keine Logs erstellt und auch keine Fehler ausgegeben.<br />
<br />
CWs (control words) sind die Antworten der Karte mit der ein bestimmter Sender für einige Sekunden freigeschaltet wird bevor das nächste cw übertragen wird. Die cw Logdatei kann dazu verwendet werden, den Sender zeitversetzt zu entschlüsseln. Das wird auch "Offline Decoding" genannt. Siehe [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
OScam erstellt für jeden Sender und jeden Tag eine neue *.cwl Datei mit Datum, Service-ID und Sendername, z.B. 110808_I000B_Sky_Cinema_+1.cwl mit diesem Inhalt:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
Wenn mindestens ein User diesen Sender schaut, werden alle notwendigen CWs gespeichert.<br />
Bitte einen Speicherort mit genügend Platz angeben, da pro Tag und Sender einge 10KB an Daten anfallen. Empfehlenswert ist ein Skript, das die logfiles regelmässig verschiebt/löscht.<br />
<br />
Beispiel:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] kein Pfad für CW-Log, Logging abgeschaltet<br />
<br />
<br />
===== emmlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für EMM-Logging eingestellt werden. Welche EMMs mitgeloggt werden sollen, kann mit den "saveemm-*"-Parametern in der oscam.server detailliert eingestellt werden.<br />
<br />
Beispiel:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] Es wird der Config-Ordner verwendet<br />
<br />
<br />
===== usrfile =====<br />
{{Optional}}<br />
Festlegung des Namens eines Files für user logging.<br />
<br />
Das user logging file hat folgendes Format<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Beispiel:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
<br />
===== disableuserfile =====<br />
{{Optional}}<br />
Jetzt wird es ganz wild: Auch wenn ein Logfile eingeschaltet ist (siehe logfile) kann hier das userfile ausgeschaltet werden.<br />
<br />
Beispiel:<br />
disableuserfile = 1 # es wird '''kein''' userfile erzeugt<br />
= 0 # es wird '''ein''' userfile erzeugt<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
<br />
===== usrfileflag =====<br />
{{Optional}}<br />
Einstellung des Logging-Modus<br />
0 = Es wird nur das Ein- und Ausloggen des Clients im Userfile geloggt<br />
1 = Jedes Zappen eines Clients wird im Userfile geloggt<br />
Default-Wert ist 0<br />
<br />
Beispiel:<br />
usrfileflag = 1 # Alles wird geloggt<br />
<br />
Default:<br />
usrfileflag = 0 # Nur Login und Logout wird geloggt<br />
<br />
<br />
===== saveinithistory =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn7128;07/02/2012</span><br />
<br />
Sicherung der Reader-Init-History. Wird benötigt, um die Entitlements anzuzeigen.<br />
<br />
Beispiel:<br />
saveinithistory = 1 # Sicherung nach /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # Keine Sicherung<br />
<br />
<br />
===== disablemail =====<br />
{{Optional}}<br />
disablemail = 0|1<br />
<br />
Schaltet das Speichern von NDS Videoguard MailMessages des Providers aus. Default: 1 (disabled)<br />
<br />
<br />
===== mailfile =====<br />
{{Optional}}<br />
mailfile = file<br />
<br />
Legt das File fest, in dem NDS Videoguard MailMessages des Providers gespeichert werden sollen.<br />
<br />
Default: [blank] kein File.<br />
<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
Delay in Millisekunden für eine Anfrage an cache exchange mode 1 reader, default: kein delay<br />
<br />
<br />
==== reader ====<br />
===== enableled =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
<br />
===== serialreadertimeout =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8541:03/13/2013</span><br />
<br />
'''Nur wenn Serialreader benutzt wird'''<br />
Timeout in Millisekunden für Serialreader<br />
<br />
Beispiel:<br />
serialreadertimeout = 1200 # Timeout nach 1200 Millisekunden<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout nach 1500 Millisekunden<br />
<br />
<br />
===== waitforcards =====<br />
{{Optional}}<br />
Hier kann festgelegt werden, ob OSCam beim Start des Programms auf lokale Karten wartet, bevor die Netzwerkports geöffnet werden.<br />
<br />
Beispiel:<br />
waitforcards = 0 # Nicht Warten<br />
<br />
Default:<br />
waitforcards = 1 # Warten<br />
<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional}}<br />
waitforcards_extra_delay = Millisekunden<br />
<br />
Zusätzliche Verzögerung in Millisekunden nach Warten auf lokale SCs während des Starts vor dem Öffnen von Netzwerk-Ports<br />
<br />
default = 500<br />
<br />
<br />
===== preferlocalcards =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9605:03/29/2014</span><br />
<br />
Der Parameter legt fest, welche Quelle zuerst für die Dekodierung verwendet werden sollen.<br />
<br />
Beispiel:<br />
preferlocalcards = 0 # lokale Karten werden wie remote Reader behandelt<br />
<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
preferlocalcards = 2 # Lokale Karten werden dem CacheEX vorgezogen<br />
<br />
Default:<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
<br />
===== readerrestartseconds =====<br />
{{Optional}}<br />
Festlegung einer Wartezeit in Sekunden zwischen Restarts von Readern.<br />
<br />
Beispiel:<br />
readerrestartseconds = 10 # Wartezeit 10 Sekunden<br />
= 0 # '''keine Readerrestarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # Wartezeit 5 Sekunden<br />
<br />
<br />
===== block_same_ip =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_ip = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit derselben IP-Addresse zurück, default = 1<br />
0 = nicht zurückweisen<br />
<br />
<br />
===== block_same_name =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_name = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit demselben Namen zurück, default = 1<br />
0 = Nicht zurückweisen<br />
<br />
<br />
==== cache ====<br />
===== cachedelay =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
<br />
===== max_cache_time =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clienten-Anfrage im cache verbleiben. Die zeit muss 2 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
===== max_cache_count =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = Anzahl, default 1000<br />
<br />
Maximale Zahl von CWs im cache<br />
<br />
<br />
===== cacheexwaittime =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
Maximale Wartezeit für einen Cache-Zugriff in Millisekunden für cacheex = 1 Reader.<br />
50 Millisekunden = default<br />
<br />
<br />
===== cacheexenablestats =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== client ====<br />
===== clienttimeout =====<br />
{{Optional}}<br />
<br />
Maximale Zeit in Millisekunden, bevor ein Client ein Timeout erhält.<br />
<br />
Beispiele:<br />
clienttimeout = 10000 # nach 10 Sekunden erfolgt ein Timeout<br />
clienttimeout = 10 # hier erfolgt aber ein Timeout bereits nach 10 Millisekunden, s. Hinweis unten!<br />
clienttimeout = 8 # der Timeout erfolgt nach 8000 Millisekunden (= 8 Sekunden), s. Hinweis<br />
Default:<br />
clienttimeout = 5000 # nach 5000 ms (=5 Sekunden) erfolgt ein Timeout<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bei Werten < 10 (also 1 bis 9) werden diese mit Eintausend multipliziert, aus "5" wird also 5000 ms. Eine eingetragene "10" bleibt aber bei zehn Millisekunden!<br />
<br />
===== clientmaxidle =====<br />
{{Optional}}<br />
Begrenzt die Leerlaufzeit eines Clienten in '''Sekunden''' bevor er vom Traffic getrennt wird.<br />
<br />
Beispiel:<br />
clientmaxidle = 200 # Trennung nach 200 Sekunden<br />
= 0 # Begrenzung ist ausgeschaltet, keine Trennung vom Traffic beim Leerlauf!<br />
<br />
Default:<br />
clientmaxidle = 120 # Trennung nach 120 Sekunden<br />
<br />
<br />
===== suppresscmd08 =====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
suppresscmd08 = 0 # Mitteilung an Clienten mit den Protokollen camd 3.5x, 3.57x und 3.78x, keine neuen Anfragen wegen <br />
zurückgewiesener Kombination aus CAID, SID und Provider-ID zu schicken (default)<br />
= 1 # Anfragen sollen weiterhin geschickt werden<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
<br />
==== fallbacktimeout ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Bei mehreren Readern (Siehe Abschnitt [reader] in oscam.server) kann ein Reader bestimmt werden, auf den z.B. bei einer Störung der übrigen Reader der traffic zurück fällt.<br />
<br />
Maximale Wartezeit des [[Cardserver]]s in Millisekunden auf primäre [[Reader]], bevor der/die [[Fallback]]-Reader (falls vorhanden!) befragt werden.<br />
<br />
Beispiel:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Der Wert muss größer dem Wert von "serialreadertimeout" gewählt werden, ansonsten werden die Standardwerte verwendet.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = Millisekunden<br />
<br />
Wartezeit in Millisekunden, bevor der für eine CAID reservierte [[Reader]] befragt wird.<br />
<br />
Default = 2500<br />
<br />
<br />
==== sleep ====<br />
{{Optional}}<br />
Alle User nach "n" Minuten "inaktivieren", wenn diese den Sender nicht innerhalb der eingestellten Zeit wechseln. Diese Einstellung kann auch für jeden User separat vorgenommen werden: [[OSCam/de/Config/oscam.user#sleep]]<br />
<br />
Beispiel:<br />
sleep = 240 # inaktiv nach 4 Stunden<br />
<br />
Default:<br />
sleep = # [blank]<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam hört auf ALLE IP Adressen.<br />
<br />
<br />
==== bindwait ====<br />
{{Optional}}<br />
Maximale Zeit in Sekunden, die der [[Cardreader]] beim Start wartet, bis er den jeweiligen Netzwerk-Port in Zugriff bekommt. Falls der OSCam innerhalb dieser Zeit den Port nicht binden kann, terminiert er mit "Bind Request failed". Ursachen dafür sind<br />
* Doppelbelegung von Ports<br />
* Ein vormals abgestürzter OSCam der die Ports nicht wieder freigegeben hat<br />
* OSCam wurde mehrmals gleichzeitig gestartet<br />
<br />
Beispiel:<br />
bindwait = 20 # Wartezeit 20 Sekunden<br />
<br />
Default:<br />
bindwait = 120 # Wartezeit 120 Sekunden<br />
<br />
<br />
==== netprio ====<br />
{{Optional}}<br />
Hier kann die Priorität des Cardservers im Netzwerk festgelegt werden<br />
<br />
Beispiel:<br />
netprio = 1 # Prioritätsstufe 1<br />
<br />
Default:<br />
netprio = 0 # Systembedingte Priorität<br />
<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional}}<br />
Art der DNS-Auflösung. Dies sind zwei verschiedene libc-Aufrufe für die Namensauflösung, weil einige ältere Systeme Probleme mit der moderneren Implementierung ''getadressinfo'' haben bzw. diese Funktion aus ihren Images gestrippt wurden (zB die alte dBox2). Außerdem ist ''getadressinfo'' threadsafe, während ''gethostbyname'' es nicht ist und deshalb locks drumherum im Code benötigt. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Beispiel:<br />
resolvegethostbyname = 1 # Name wird mittels ''gethostbyname'' aufgelöst<br />
<br />
Default:<br />
resolvegethostbyname = 0 # ''getadressinfo'' wird benutzt<br />
<br />
<br />
====failbancount====<br />
{{Optional}}<br />
Failbancount = Anzahl der erlaubten Fehlversuche mit falschen Zugangsdaten. <br />
= 0 (default) IP wird sofort beim ersten Versuch mit unbekannten Zugangsdaten gesperrt!<br />
<br />
Wenn innerhalb '''failbantime''' mehr als in '''failbancount''' erlaubte Versuche registriert wurden, wird die IP für die restliche failbantime gesperrt. Nach Ablauf von failbantime stehen wieder volle failbancount zur Verfügung. Failbancount ist also eine Lockerung der Regeln<br />
<br />
<br />
==== failbantime ====<br />
{{Optional}}<br />
Zeitspanne in Minuten, für die ein Client mit ungültigem Login-Versuch auf IP-Basis geblockt wird.<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP Adresse wird für 5 Minuten geblockt. Neue Loginversuche werden ignoriert auch wenn das Login OK wäre.<br />
# Es wird kein Clientthread erstellt.<br />
<br />
Default:<br />
failbantime = 0 # failban ist ausgeschaltet (default)<br />
<br />
<br />
==== dropdups ====<br />
{{Optional}}<br />
Möglichkeiten zur Duplizierung von Client-Verbindungen. Es wird damit die Reaktion auf den [[OSCam/de/Config/oscam.user#uniq|uniq]]-Parameter festgelegt.<br />
<br />
0 = Markierung des Clienten als Duplikat aber keine Trennung (default)<br />
1 = Abbrechen der Duplikat-Verbindung anstelle einer Markierung als Duplikat<br />
<br />
<br />
==== unlockparental ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7289:08/27/2012</span><br />
<br />
'''Nur Seca und Viaccess'''<br />
<br />
Option zum Ausschalten der Jugendschutzfunktion für Seca und Viaccess Pin Code Anfragen bei adult movies.<br />
Bei Viaccess z.B. für die Redlight Elite HD Smartcard. Mit unlockparental = 0 bleibt Dorcel Dunkel mit 1 wirds hell!<br />
<br />
Beispiel:<br />
unlockparental = 1 # Jugendschutzfunktion ausgeschaltet<br />
<br />
Default:<br />
unlockparental = 0 # Jugendschutzfunktion von Seca und Viaccess eingeschaltet<br />
<br />
<br />
==== double_check ====<br />
{{Optional}}<br />
'''Nur wenn CW double check ausgewählt ist!'''<br />
<br />
ECM wird zu 2 oder mehr Readern mit der selben SC gesandt und die CW's werden gegeneinander verifiziert. lb_nbes_reader muss auf 2 oder höher gesetzt werden.<br />
<br />
Beispiel:<br />
double_check =<br />
<br />
Default:<br />
double_check = 0<br />
<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|erste 2 digits von CAID1],[CAID2|erste 2 digits von CAID2],... = [blank] keine [default]<br />
<br />
ECM wird an 2 oder mehr Reader mit der gleichen SC gesendet und die CW's werden gegen andere definierte CAIDs oder die ersten 2 bytes der CAIDs verifiziert. lb_nbest_readers muss auf 2 oder höher gesetzt sein!<br />
<br />
<br />
==== Loadbalancer ====<br />
===== lb_mode =====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Wenn hier loadbalancing aktiviert wird, dann sind die in oscam.server bei services stehenden Besonderheiten zu beachten. Siehe [[streamboard:wiki/OSCam/de/Config/oscam.server#services|Services]]!<br />
<br />
Loadbalance Mode<br />
<br />
Wenn man zwei oder mehrere gleiche Karten hat (egal ob lokal oder als Proxie), kann man die Last auf diese Karten gleichmäßig verteilen (balancieren).<br />
<br />
Beispiel:<br />
lb_mode = 0 (deaktiviert) (default)<br />
lb_mode = 1 (schnellster Reader zuerst)<br />
lb_mode = 2 (Reader der am längsten nicht geantwortet hat wird genommen)<br />
lb_mode = 3 (Reader mit der geringsten Auslastung wird verwendet)<br />
lb_mode = 10(LB ist ausgeschaltet, Senderstatistik wird trotzdem erstellt)<br />
<br />
Default:<br />
lb_mode = 0 # deaktiviert<br />
<br />
<br />
===== lb_save =====<br />
{{Optional}}<br />
Speichert die Loadbalance Statistik, damit sie auch nach einem Neustart erhalten bleibt.<br />
Um die CPU nicht zu sehr zu belasten, sollte hier ein Wert > 100 eingetragen werden.<br />
<br />
Beispiel:<br />
lb_save = 100 # Anzahl der ECM's nach der die Statistik gespeichert wird<br />
<br />
Default:<br />
lb_save = 0 # Statistik wird nicht gespeichert<br />
<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional}}<br />
Anzahl der Reader, die für die ECM anfragen.<br />
<br />
Beispiel:<br />
lb_nbest_readers = 2 # Anfragen gehen immer an zwei Reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # Anfrage geht nur an einen Reader<br />
<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional}}<br />
Anzahl der Fallback Reader für den Lastenausgleich.<br />
<br />
Beispiel:<br />
lb_nfb_readers = 2 # Zwei Fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1<br />
<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mod<br />
= 0 # Standardverfahren zum (späten) Wiederöffnen blockierender Reader (default)<br />
= 1 # Schnelles Wiederöffnen blockierender Reader<br />
<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5893:08/19/2011</span><br />
<br />
Anzahl der Reader je CAIDs für das Loadbalancing, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Default:<br />
lb_nbest_percaid = 0<br />
<br />
Beispiel:<br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wird so lange blockiert, bis die Statistik aufgeräumt ist<br />
1 = default<br />
<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = öffne alle gestoppten Reader sofort, wenn kein funktionierender Reader gefunden wird<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional}}<br />
Mindestanzahl der ECM's, die für die Auswertung genommen werden.<br />
<br />
Beispiel:<br />
lb_min_ecmcount =<br />
<br />
Default:<br />
lb_min_ecmcount = 5<br />
<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional}}<br />
Maximale Anzahl der ECM's, bevor der Loadbalancer zurückgesetzt wird.<br />
<br />
Beispiel:<br />
lb_max_ecmcount =<br />
<br />
Default:<br />
lb_max_ecmcount = 500<br />
<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional}}<br />
Zeitspanne in Sekunden zwischen neuem Verbindungsversuch zu verlorengegangenen readern/CAIDs/providers/services<br />
<br />
Beispiel:<br />
lb_reopen_seconds = 500 # Nach 500 Sekunden neuer Verbindungsversuch<br />
<br />
Default:<br />
lb_reopen_seconds = 900<br />
<br />
<br />
===== lb_retrylimit =====<br />
{{Optional}}<br />
Verbindungsversuch zum nächsten reader '''nur wenn''' die Antwortzeit höher, als hier festgelegt in '''Millisekunden'''.<br />
<br />
Beispiel:<br />
lb_retrylimit = 500 # Verbindungsversuch zum nächsten reader nur, wenn die Antwortzeit höher als 500 ms ist.<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
<br />
===== lb_savepath ===== <br />
{{Optional}}<br />
Dateiname für die Sicherung der Loadbalancing Statistiken<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional}}<br />
Zeit in Stunden, nach der die Statistiksätze gelöscht werden sollen<br />
<br />
default = 336<br />
<br />
<br />
===== lb_use_locking =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6166:12/28/2011</span><br />
<br />
Unterdrückt parallele und identische ECM-Anfragen<br />
<br />
1 = ein<br />
0 = aus # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* Man sollte diese Option nur anschalten wenn:<br />
** Langsames system<br />
** Hohe Last<br />
**Gleiche ECM Anfragen nicht aus dem Cache kommen, sondern weiter Reader angefragt werden<br />
<br />
* Vorteile aktiviert:<br />
** Durch die Synchronisierung wird ein ECM Request nach dem anderen durchgeführt, die Ermittlung von Cache oder Request und Zuordnung der Reader über den Loadbalancer ist immer erfolgreich<br />
<br />
* Nachteile aktiviert:<br />
** Die Synchronisierung verhindert Multithreading und es kommt eventuell zu höheren Antwortzeiten<br />
<br />
* Vorteile NICHT aktiviert:<br />
** Schnellere Durchlaufzeiten für ECM requests<br />
<br />
* Nachteile NICHT aktiviert:<br />
** Eventuell doppelte (bzw n-fache) ECM requests an die Reader möglich<br />
<br/><br />
<br />
<br />
===== lb_retrylimits =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,CAID2:time2]...<br />
<br />
Begrenzung der Zeit für einen retry des loadbalancing eines CAID in Millisekunden, wildcard CAIDs mit two-digit CAIDs möglich, <br />
<br />
default: [blank]<br />
<br />
Beispiel:<br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
Ignoriere die Providerinformations-CAIDs, um die statistischen Daten zu reduzieren, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Beispiel:<br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx und 34xx)<br />
<br />
default = [blank]<br />
<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # ermöglicht ein automatisches timeout auf der Basis von Statistiken des Loadbalancers<br />
= 0 # default<br />
<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = Prozent<br />
<br />
Prozentwert, mit dem die Timeout-Zeit beaufschlagt wird<br />
default = 30<br />
<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = Millisekunden<br />
<br />
Minimale Zeit in Millisekunden, die zur Timeout-Zeit hinzuaddiert wird<br />
default = 300<br />
<br />
<br />
===== lb_max_readers =====<br />
{{Optional}}<br />
lb_max_readers = limit (Zahl)<br />
<br />
beschränkt die Zahl der Reader während der Lernphase des Loadbalancing<br />
<br />
0 = unbegrenzt (default)<br />
x = beschränkt auf ein Limit von x (Zahl)<br />
<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional}}<br />
lb_auto_betatunnel = 0|1<br />
<br />
Ermöglicht automatisches Betatunneling für Betacrypt (CAIDs 1801, 1833, 1834 und 1835), wenn Loadbalancing verwendet wird<br />
lb_auto_betatunnel = 0 # ausgeschaltet<br />
= 1 # eingeschaltet (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Eintragungen für Betatunnel in oscam.user werden bevorzugt. Siehe [[streamboard:wiki/index.php/OSCam/de/Config/oscam.user#betatunnel|Betatunnel]]<br />
<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
setzt den Mode für das automatische Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only)<br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = Auswahl (Zahl)<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = immer Betacrypt<br />
105 = wählt einen Mittelwert<br />
200 = immer Nagravision<br />
<br />
<br />
=== '''Monitor''' ===<br />
Hier sind nur dann Eintragungen erforderlich, wenn ein Monitor benutzt wird!<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
UDP-Port für den Monitor<br />
port = 0 # Kein Monitor<br />
= # [blank] Portnummer Monitor ausgewählt<br />
<br />
Beispiel:<br />
port = 24480 # Monitor eingeschaltet mit Port 24480<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Service mit einer bestimmten IP-Adresse verbinden<br />
serverip = # IP-Adresse<br />
= # [blank] alle IP's (default)<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Unverschlüsselte Monitorverbindungen.<br />
<br />
Möglich<br />
* eine oder mehrere IP-Einzeladressen<br />
* eine oder mehrere IP-Bereiche<br />
* eine Mischung von IP-Einzeladressen oder IP-Bereichen<br />
<br />
Beispiel<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 und IP-Bereich 192.168.0.0 bis 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] keine unverschlüsselte Monitorverbindung.<br />
<br />
<br />
==== aulow ====<br />
{{Optional}}<br />
Zeitraum in Minuten, in dem keine EMM erscheinen, so dass der Client von "active" auf "on" gesetzt wird.<br />
<br />
Beispiel<br />
aulow = 30 # Nach 30 Minuten ohne EMM wird der Status von "active" auf "on" gesetzt (default).<br />
<br />
<br />
==== monlevel ====<br />
{{Optional}}<br />
Monitor-Level<br />
0 = Kein Zugriff auf Monitor (default)<br />
1 = Nur Server und eigene Prozeduren<br />
2 = Alle Prozeduren, aber nur ansehen<br />
3 = Alle Prozeduren, reload von oscam.user möglich<br />
4 = Unbeschränkter Zugriff<br />
<br />
Beispiel<br />
monlevel = 4 # Kompletter Zugriff<br />
<br />
Monlevel kann durch Eintragungen in oscam.user überschrieben werden!<br />
<br />
<br />
==== hideclient_to ====<br />
{{Optional}}<br />
Zeitspanne in Sekunden für das Ausblenden von Clients, die keine Anfragen senden. Siehe auch Parameter '''httphideidleclienst''' in Abschnitt [webif].<br />
hideclient_to = 40 # Clienten werden nach 40 Sekunden ohne Anfrage ausgeblendet<br />
= 0 # Keine Ausblendung von Clienten im Leerlauf<br />
<br />
<br />
==== appendchaninfo ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8546:03/13/2013</span><br />
<br />
Fügt die Channel-Info aus der oscam.services der Log-Meldung hinzu. Bei Verwendung von Monitor und Webinterface ist dies eine sehr nützliche Routine!<br />
appendchaninfo = 1 # Die Channel-Info wird hinzugefügt<br />
= 0 # Keine Channel-Info (default)<br />
<br />
<br />
=== '''lcd''' ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
<br />
==== lcd_outputpath ====<br />
{{Optional}}<br />
Hier kann ein Pfad für den LCD-Output eingestellt werden<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
<br />
==== lcd_hideidle ====<br />
{{Optional}}<br />
Verbergen eines Readers im LCD-Output während des Leerlaufs<br />
<br />
lcd_hideidle = 1 # Verbergen, wenn der Leerlauf länger als 20 Sekunden dauert<br />
= 0 # default<br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional}}<br />
LCD-Refresh-Interval in Sekunden (Minimum 5 Sekunden)<br />
<br />
Default:<br />
lcd-writeinterval = [blank] 10 Sekunden<br />
<br />
<br />
=== '''WebIf''' ===<br />
Eintragungen sind nur dann erforderlich, wenn das Web-Interface (by Alno) als Modul ausgewählt wurde.<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
<br />
==== Dateiformat zum Senden von EMMs via Webinterface ====<br />
(von Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' <br />
<br />
* Die Datei muß im TXT Format sein.<br />
* Jedes PRE-CAM EMM muss in einer eigenen Zeile vorliegen.<br />
* Die EMMs müssen im HEX Format vorliegen.<br />
** Beispiel: AABBCCDD...<br />
* Leerzeichen und Tabs zwischen den bytes sind erlaubt:<br />
** AA BB CC DD...<br />
* Groß- und/oder Kleinschreibung oder gemischte Schreibweise für jeden HEX-Wert sind erlaubt:<br />
** AA aa Aa aA...<br />
* Andere Zeichen oder Kommentare sind nicht erlaubt.<br />
<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
Port, auf dem das Webinterface hört.<br />
Standard ist Port 8888 wenn kein eintrag erfolgt<br />
<br />
httpport = 83 # Webinterface hört auf '''http-port 83'''<br />
= +83 # Webinterface hört auf '''https-port 83''' (SSL)<br />
0 # Webinterface ist ausgeschaltet<br />
<br />
<br />
==== httpcert ====<br />
{{Optional}}<br />
Datei für das SSL-Zertifikat<br />
httpcert = oscam.cert # (siehe dort!)<br />
= # [blank] es wird die Datei oscam.pem (embedded) verwendet<br />
<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
Beispiel<br />
httpforcesslv3 = 0 (default)<br />
= 1 benutze SSLv3<br />
<br />
<br />
==== httpuser ====<br />
{{Mandatory}}<br />
Name des Users für den Zugriffsschutz. Es wird zwar [blank] als Default-Wert angeboten. Davon wird aber dringend abgeraten; daher wird dieser Parameter hier als '''zwingend''' beschrieben.<br />
httpuser = # xyxyxy<br />
<br />
<br />
==== httppwd ====<br />
{{Mandatory}}<br />
Passwort für den Zugriffsschutz. Es gilt das gleiche wie für httpuser.<br />
httppwd = # 123456<br />
<br />
'''Die Parameter ''user'' und ''pwd'' werden beim Verbindungsaufbau zum Webinterface in einem Kontrollfenster abgefragt. Fehlen sie oder sind sie fehlerhaft, erfolgt die Meldung ''Forbidden'' und der Verbindungsaufbau wird abgebrochen!'''<br />
<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6825:05/15/2012</span><br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Füge den content des embedded CSS '''nicht vor''' dem content des user-css ein (default)<br />
1 # Embedded CSS wird '''vor''' dem externen CSS hinzugefügt(siehe nächsten Parameter: [[#httpcss|httpcss]])<br />
<br />
Dieser Parameter kann dazu benutzt werden, den embedded CSS mit custom styles zu überschreiben. Die laufenden CSS styles können hier angeschaut werden: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
<br />
==== httpcss ====<br />
{{Optional}}<br />
Für das Webinterface stehen verschiedene Styles in unterschiedlicher farblicher und graphischer Darstellung zur Verfügung. Der User kann die für ihn interessanten Style-Dateien (.css) speichern und je nach "Stimmung" verwenden. Hier wird der Pfad zu den Style-Dateien festgelegt.<br />
<br />
Beispiel<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] es wird der embedded Style verwendet (default)<br />
<br />
Styles werden hier veröffentlicht: [[streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
<br />
==== httptpl ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7083:06/25/12</span><br />
<br />
Pfad für externe templates und picons<br />
httptpl =<br />
= # [blank] Keine externen Templates<br />
<br />
Multiple simultane templates und picons können durch die Anlage von Unterordnern (mit max. 32 alphanumerischen Zeichen) zur Verfügung gestellt werden. Der Name des Unterordners korrespondiert mit dem Unterordner in der URL, default : [blank]<br />
<br />
Beispiele<br />
<br />
httptpl = /this/is/my/path <br />
<br />
Ordner mit multiplen templates: <br />
/this/is/my/path/template1 <br />
/this/is/my/path/template2 <br />
<br />
gültige URLs: <br />
http://host:port/template1 <br />
http://host:port/template2 <br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httpoverwritebakfile ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = überschreibe backup configurations files (*.bak)<br />
0 = default<br />
<br />
<br />
==== httplocale ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
hier kann ein "locale environment" gesetzt werden.<br />
<br />
default = [blank] kein environment<br />
<br />
Siehe auch hier:<br />
<br />
http://de.wikipedia.org/wiki/locale<br />
<br />
<br />
==== httpjscript ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
Path für oscam.js javascript, default : [blank]<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional}}<br />
Aktualisierungszeit in Sekunden, in der die (kompletten) Seiten des Webinterfaces aktualisiert werden<br />
httprefresh = 7 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httppollrefresh ====<br />
{{Optional}}<br />
<br />
Initialisierungszeit des Pollings und Aktualisierungszeit, in der diverse Daten des Webinterfaces neugeladen werden (Zeit kann auf den entsprechenden Seiten geändert werden)<br />
httppollrefresh = 60 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httpshowpicons ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # zeige picons in userlist<br />
0 # default<br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httphideidleclients ====<br />
{{Optional}}<br />
Dieser Parameter ermöglicht es, einen Clienten nach Ablauf der im Parameter '''hideclient_to''' im Abschnitt [monitor] festgelegten Leerlauf-Zeitspanne (siehe dort!) auszublenden.<br />
httphideidleclients = 1 # Ausblenden<br />
= 0 # Nicht ausblenden (default)<br />
<br />
==== httphidetype ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
Buchstabe der definiert, welcher type in der type-column auf der Statusseite des Webinterfaces versteckt werden soll. <br />
s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
<br />
==== httpscript ====<br />
{{Optional}}<br />
Pfad für Skripte, die vom Webinterface aus gestartet werden können<br />
httpscript = # Pfad<br />
= # [blank] kein Pfad<br />
<br />
<br />
==== httpallowed ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8842:08/17/2013</span><br />
<br />
Hier werden IP-Addressen, IP-Bereiche oder beides festgelegt, die auf das Webinterface zugreifen dürfen. Es wird zwar auch ein [blank] als Default-Wert angeboten, dessen Sinn sich aber nicht erschließt! Wenn das Webinterface benutzt werden soll, dann muss es auch die Möglichkeit geben, sich mit ihm zu verbinden. Daher wird dieser Parameter als '''zwingend''' dargestellt.<br />
<br />
Wenn ein localhost nach '''IPv6''' aufgelöst werden soll, muss die Zeile mit '''::1''' abgeschlossen werden!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
Beispiel<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen <br />
und werden nach IPv6 aufgelöst<br />
'''Default Werte'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255,::1<br />
<br />
<br />
==== httpdyndns ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6558:03/21/12</span><br />
<br />
Zulassen von DYNDNS-Verbindungen durch das Webinterface.<br />
<br />
httpdyndns = hostname[,hostname][,hostname]<br />
<br />
Beispiel<br />
httpdyndns = host1.exemple.com, host2.exemple.com<br />
<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional}}<br />
Sicherung der Konfigurationsdateien<br />
httpsavefullcfg = 0 # alle nicht leeren Parameter,<br />
# alle nicht Default-Parameter,<br />
# alle Parameter, die nicht den gleichen Inhalt enthalten wie dieselben Parameter in [global] (default).<br />
1 # alle Parameter<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional}}<br />
<br />
Über das Webinterface können in bestimmtem Unfang Konfigurations-Dateien editiert und gesichert werden. Das ist für den Server-Admin, der sich nicht immer in der Nähe zur Konsole des Servers befindet, sehr vorteilhaft. Wenn aber weitere User oder andere Beteiligte ebenfalls Zugang zum Webinterface und damit Zugriff auf die Daten haben, kann das zu einem Problem werden. Die Möglichkeit des Editierens (Schreibens) kann daher mit diesem Parameter ausgeschaltet werden.<br />
httpreadonly = 1 # nur Lesezugriff möglich<br />
= 0 # alles ist möglich (default)<br />
<br />
<br />
==== httpiconpath ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9463/01/28/2014</span><br />
<br />
httpiconpath = path<br />
<br />
Pfad zur Picon-Datei, default [blank] none<br />
<br />
<br />
==== httphelplang ====<br />
{{Mandatory}}<br />
httphelplang = de|en|fr|it<br />
<br />
Auswahl der Sprache für die Kontexte<br />
<br />
de = deutsch<br />
en = englisch<br />
fr = französisch<br />
it = italienisch<br />
[blank] = englisch (default)<br />
<br />
<br />
==== httposcamlabel ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
Setzt ein individuelles label für den header des Webinterfaces, default: OSCam rXXXX<br />
<br />
<br />
=== '''Cache''' ===<br />
{{OSCamConfCacheParameter}}<br />
<br />
<br />
==== delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
<br />
==== max_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
max_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clientanfrage im Cache verbleiben. Die Zeit muß 3,5 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
==== max_hit_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8910:09/10/2013</span><br />
<br />
max_hit_time = in Sekunden<br />
<br />
Maximale Zeit, die Treffer für cache exchange im cache verbleiben müssen um wait_time zu evaluieren, default: 15<br />
<br />
<br />
==== wait_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Wartezeit und Dynamische Wartezeit in Millisekunden für cache exchange und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
<br />
= [blank] none (default)<br />
<br />
'''Info:'''<br />
awtime --> Zeit die bei jeder Anfrage gewartet wird (always wait time)<br />
dwtime --> Zeit die bei positivem Fund eines CWs im Cache gewartet wird (dynamic wait time)<br />
<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
<br />
Verwendungspraxis:<br />
wait_time = 098C:5:130,09C4:5:130,1702:5:1900,1830:5:490,1843:5:490,0D05:5,0B00:5<br />
<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional}}<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode (bestimmt die Verwenung des Parameters ''counter'')<br />
<br />
0 = Falls ''wait_time'' abgelaufen ist, sende das CW mit dem höchsten counter an die clients<br />
1 = Niemals ein CW (von cacheex) aus dem cache versenden, wenn der counter aus dem cacheex den in diesem Parameter <br />
gesetzten counter nicht erreicht. Falls ''wait_time'' erreicht ist, geht der request an normale reader. <br />
Nur wenn ein CW den gesetzten counter erreicht, wird es an die clients gesendet.<br />
Default = 0<br />
<br />
<br />
* counter (bestimmt den counter des CW, der mindestens erreicht werden muss, um versendet zu werden)<br />
<br />
Default = 1 (benutze das CW mit dem höchsten counter aus dem cache)<br />
<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = erlaube bad cw's von einem festgelegten fallback reader. Default = 0<br />
<br />
<br />
'''Info:'''<br />
<br />
Bei '''aktiviertem''' Parameter wird bei einem bad CW die Anfrage an den fixed Fallback weitergeleitet<br />
und somit ein freetzer meist verhindert.<br />
<br />
<br />
Siehe --> [[OSCam/de/Config/oscam.server#fallback|fallback]]<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== csp_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von CSP-Nodes hört<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Lokale Bind-IP für csp_port (siehe oben)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 ausgeschaltet (default)<br />
= 1 eingeschaltet<br />
<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Für NDS Karten nur in einer light Version verfügbar''' <br />
<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID, für die der CW-Cycle-Check ermöglicht werden soll, [blank] = kein Check (Default)<br />
<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = Zahl<br />
<br />
Maximum von CW-Cycle-Entries in die Liste, default = 500, maximum = 4000<br />
<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = Minuten<br />
<br />
Minimalzeit, die ein erkannter Cycle in der Memory verbleiben soll, default = 15, maximum = 240<br />
<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = ungültige CW-Cycle kommen nur ins Log <br />
1 = ungültige CW-Cycle werden gedropped (default)<br />
<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, 1 = alte CW-Cycle werden gedropped, 0 = kein Dropping (default)<br />
<br />
<br />
==== cwcycle_sensitive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (oder mehr) gleiche bytes und drop neues CW<br />
3 = 3 (oder mehr) gleiche bytes und drop neues CW<br />
4 = 4 (oder mehr) gleiche bytes und drop neues CW<br />
<br />
--> Höherer Wert entspricht höherer Empfindlichkeit<br />
<br />
<br />
==== cwcycle_usecwcfromce ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = benutze CW Info aus cache exchange<br />
0 = default<br />
<br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
antworte, wenn das cache exchange timeout erreicht ist und keine normalen Reader zur Verfügung stehen, die ECM's senden:<br />
<br />
0 = sende sofort '''not found''' an den client (default)<br />
1 = warte auf eine Antwort für cache exchange bis der timeout für den client erreicht ist<br />
<br />
<br />
=== '''csp (UDP''') ===<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:02/16/2013 Siehe Section '''[cache]'''!</span><br />
<br />
Abschnitt nur dann erforderlich, wenn csp als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von csp-nodes hört<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
Local Bind IP für den oben genannten UDP-Port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== wait_time ====<br />
{{Mandatory}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET Siehe Section '''[cache]'''!</span><br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8060:01/04/13</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8077:01/06/13</span><br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
= [blank] none (default)<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
Wartezeit in Millisekunden für cache exchange ('''nur mode 2&3''') und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
=== '''Camd 33 (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn camd33 als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd 33 Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein Adressbereich, der unverschlüsselt übertragen wird.<br />
<br />
Beispiel:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt =<br />
<br />
<br />
==== passive ====<br />
{{Optional}}<br />
Definition für aktiven oder passiven Client. Generell geht das Camd3.3x-Protokoll von einem aktiven Client aus. Es kann aber unter bestimmten Umständen bei manchen Clients (meistens plugin) zur Schwierigkeiten kommen. In diesem Fall<br />
<br />
Beispiel:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
<br />
==== key ====<br />
{{Optional}}<br />
<br />
Schlüssel, der für die Verschlüsselung verwendet wird. (128bit Verschlüsselung)<br />
<br />
Beispiel:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key =<br />
<br />
<br />
=== '''cs357x (UDP)''' ===<br />
Abschnitt nur dann erforderlich, wenn cs357x als Client Protokoll verwendet wird.<br />
Dieses Protokoll verschlüsselt grundsätzlich und bildet den Schlüssel aus dem Benutzernamen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:'''<br />
'''cs357x''' wurde auch als '''camd35''' bezeichnet. Beide Bezeichnungen meinen das gleiche Protokoll mit den gleichen Funktionsweisen und Parametern. Künftig wird zur Vermeidung von Irritationen '''nur noch cs357x''' verwendet.<br />
<br />
Eine genauere Erklärung für UDP findet Ihr hier [http://de.wikipedia.org/wiki/User_Datagram_Protocol]<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus cs357x Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs357x -clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Tread]]<br />
<br />
<br />
=== '''cs378x''' (TCP) ===<br />
Abschnitt nur dann erforderlich, wenn cs378x als Client Protokoll notwendig ist.<br />
<br />
Eine ausführliche Erklärung von TCP findet Ihr hier [http://de.wikipedia.org/wiki/Transmission_Control_Protocol]<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein das OSCam nur antwortet wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs3.78x-clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
<br />
=== '''Newcamd (TCP)''' ===<br />
Abschnitt nur dann erforgerlich, wenn newcamd als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
<br />
==== key ====<br />
{{Mandatory}}<br />
Schlüssel für die Newcamd Verbindung zum Client.<br />
<br />
Beispiel:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Newcamd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000@1234:000000 # (CAID 1234 ist über Port 15000 erreichbar)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 ist über Port 15000 erreichbar CAID 5678 über Port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Hat der Server mehrere IP Adressen werden nur Anfragen die an die konfigurierte IP gehen beantwortet.<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein bestimmter IP Bereich der sich auf den Newcamd Server verbinden darf.<br />
<br />
Beispiel:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed =<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
Der Server versucht, die Newcamd Verbindung am leben zu halten.<br />
<br />
Beispiel:<br />
keepalive = 1 # (aktiviert)<br />
keepalive = 0 # (deaktiviert)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
<br />
==== mgclient ====<br />
{{Optional}}<br />
Aktiviert das Extendet Newcamd Protokol, um mehrer CAID's über einen Port zu schicken<br />
<br />
Beispiel:<br />
mgclient = 1 # (aktiviert)<br />
mgclient = 0 # (deaktiviert)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br />
=== '''scam''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9878:09/29/2014</span><br />
<br />
Abschnitt nur dann erforderlich, wenn scam als Client-Protocol verwendet wird.<br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
port = port<br />
<br />
UDP-Port für scam server, default = 0<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
=== '''Radegast''' ===<br />
Abschnitt nur dann erforderlich, wenn Radegast als Client-Protokoll notwendig ist.<br />
<br />
{{OSCamConfRadegastParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
TCP/IP-Port für Radegast-Clients. Mit dem Eintrag wird das Radegast-Protokoll enabled.<br />
port =<br />
= 0 (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
<br />
Username des Radegast-Client<br />
user = username<br />
<br />
<br />
=== '''Serial''' ===<br />
Abschnitt nur dann erforderlich, wenn eine serielle Reader-Schnittstelle notwendig ist.<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
<br />
==== device ====<br />
{{Optional}}<br />
<br />
Parameter der Device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = Name der Serial Device<br />
option = timeout = Millisekunden Timeout für die Verbindung default: 50<br />
= delay Millisekunden Zusätzliche Verzögerung zwischen 2 Characters<br />
<br />
Unterstützte Serial Devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
<br />
=== '''Cccam (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn Cccam als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCccamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6206:01/07/2012</span><br />
<br />
TCP/IP-Ports für CCcam-Clients. Mit dem Eintrag eines oder mehrerer Ports wird das CCcam-Protokoll enabled.<br />
<br />
port = 0|port[,port...]<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled<br />
<br />
<br />
==== version ====<br />
{{Optional}}<br />
Definiert die Version von CCcam, mindestens Version 2.0.11, Default-Wert = 0<br />
<nowiki><main version>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
version = 2.0.11<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
==== reshare ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Reshare-Level<br />
-1 = kein Resharing<br />
0 = nur Reshare für Direct-Peer<br />
1 = Reshare für Direct-Peer und den nächsten Level<br />
x = Reshare für Direct-Peer und die nächsten x Level (x steht für die Zahl der Level)<br />
<br />
Beispiel<br />
reshare = 1 Reshare nur für Direct-Peer und den nächsten Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
==== reshare_mode ====<br />
{{Optional}}<br />
Arten des reshare:<br />
0 = reader reshared nur empfangene SCs für CCcam-reader<br />
1 = reader reshared empfangene SCs (wie=0) und definierte services<br />
2 = reader reshared nur definierte reader-services als virtueller SC<br />
3 = reader reshared nur definierte user-services als virtueller SC<br />
<br />
<br />
==== ignorereshare ====<br />
{{Optional}}<br />
CCcam Reshare-Einstellungen<br />
0 = benutze die Reshare-Einstellungen des Servers (default)<br />
1 = benutze die Reshare-Einstellungen des Readers oder Users<br />
<br />
Beispiel<br />
ignorereshare = 1 Die Reshare-Einstellungen des Readers oder Users werden benutzt<br />
<br />
<br />
==== stealth ====<br />
{{Optional}}<br />
Versteckt aktive user und das extended OSCam-Protokoll. Schützt andere OSCam-user davor, den Server als OSCam-Server zu entdecken!<br />
stealth = 1 # Tarnung eingeschaltet<br />
= 0 # Tarnung aus (default)<br />
<br />
<br />
==== minimizecards ====<br />
{{Optional}}<br />
Modus der Verbindung von CCcam-Servern zu CCcam-Clienten<br />
0 = Keine Aggregation, nur Duplikate werden entfernt (default)<br />
1 = Basierend auf Minimum-Hop: zwei SC's mit unterschiedlichen hops werden zusammengefasst, neue SC's bekommen einen kleineren hop<br />
2 = Aggregation auf CAIDs basierend: alle SC's mit der gleichen CAID werden zusammengefasst, Provider wird entfernt<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional}}<br />
Interval in Sekunden zur Verteilung der share list updates an die Clienten.<br />
<br />
0 = Update basiert auf Server-Updates, Werte kleiner als 10 sind ungültig und werden auf 30 gesetzt.<br />
= [blank) 240 (default)<br />
<br />
<br />
==== keepconnected ====<br />
{{Optional}}<br />
CCcam Keepalive-Modus:<br />
0 = Trenne Client, wenn die maximale Leerlaufzeit (idletime) erreicht ist<br />
1 = Halte die Verbindung (default)<br />
<br />
<br />
==== recv_timeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7672:10/09/2012</span><br />
<br />
recv_timeout = Millisekunden<br />
<br />
hier kann ein network-timeout beim Empfang von Daten gesetzt werden<br />
default = 2000<br />
<br />
<br />
==== forward_origin_card ====<br />
{{Optional}}<br />
forward_origin_card = 0|1<br />
<br />
Weiterleitung des ECM-Requests an den reader, der diese Karte hat.<br /><br />
Loadbalancer und Caching werden dabei deaktiviert.<br />
<br />
1 = Weiterleitung eingeschaltet<br />
0 = Aus (default)<br />
<br />
<br />
==== nodeid ====<br />
{{Optional}}<br />
nodeid = ID<br />
<br />
setzt CCcam node ID in '''hex''', <br />
<br />
default:none<br />
<br />
Beispiel:<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br />
Wenn eine nodeid benutzt wird, dann wechselt der Server das Protokol von "cccam ext" zu "cccam".<br />
<br />
<br />
=== '''Pandora''' ===<br />
{{OSCamConfPandoraParameter}}<br />
==== pand_skip_send_dw ====<br />
pand_skip_send_dw = dummy<br />
<br />
==== pand_allowed ====<br />
pand_allowed = dummy<br />
<br />
==== pand_usr ====<br />
pand_user = dummy<br />
<br />
==== pand_pass ====<br />
pand_pass = dummy<br />
<br />
==== pand_ecm ====<br />
pand_ecm = dummy<br />
<br />
==== pand_port ====<br />
pand_port = dummy<br />
<br />
==== pand_srvid ====<br />
pand_srvid = dummy<br />
<br />
<br />
=== '''GBox''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
{{OScamConfGboxParameter}}<br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBox läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
===== my_password =====<br />
{{Mandatory}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9163:12/31/2013</span><br />
'''moved from oscam.server'''<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
Passwort = 4 hex bytes, 8 chara<br />
<br />
Mein Passwort<br />
<br />
Beispiel<br />
98AF3E25<br />
<br />
==== hostname ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
hostname = eigene IP oder hostname<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
port = port[,port]... udp ports, die die gbox überwacht<br />
<br />
<br />
==== proxy_card ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy_Card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
proxy reader SmartCard(s), die mit gbox network reshared werden, default = none<br />
<br />
<br />
==== ccc_reshare ====<br />
{{Optional}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = cccam Karten können ins gbox Netzwerk transportiert werden , default = 0 (global setting)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Caid der Karten müssen in 'ccc_gbx_caid =' spezifiziert werden<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Der Share Level für jeden peer wird spezifiziert in oscam.server [reader]-> cccam_reshare<br />
<br />
<br/><br />
<br />
==== ccc_gbx_caid ====<br />
{{Optional}}<br />
<br />
ccc_gbx_caid = caid_1,caid_2,...<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' 'ccc_reshare' muß zusätzlich gesetzt werden<br />
<br />
<br/><br />
<br />
<br />
==== my_vers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9645:04/09/2014</span><br />
<br />
my_vers = version<br />
<br />
hier kann das low byte (hex) der eigenen gbox version gesetzt werden<br />
<br />
default = 2A<br />
<br />
==== my_cpu_api ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9712:05/11/2014</span><br />
<br />
my-cpu_api = byte<br />
<br />
Setze CPU und API Byte in hexadecimal<br />
default = 40<br />
<br />
<br />
==== gbox_reconnect ====<br />
{{Optional}}<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min=60, max=300<br />
<br />
==== gsms_disable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9714:05/11/2014</span><br />
<br />
gsms_disable = 0|1<br />
<br />
schaltet gbox short message service (GSMS) aus, <br />
default = 1<br />
<br />
==== tmp_dir ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/2014</span><br />
<br />
tmp_dir = path<br />
<br />
tempory directory für gbox<br />
<br />
default = /tmp/.oscam<br />
<br />
=== '''DVBapi''' ===<br />
{{Optional}}<br />
Abschnitt nur dann erforderlich, wenn OScam auch als Client zum entschlüsseln eingesetzt werden soll.<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional}}<br />
DVBapi zum lokalen Entschlüsseln verwenden<br />
<br />
Beispiel:<br />
enabled = 0 # (deaktiviert)<br />
enabled = 1 # (aktiviert)<br />
<br />
Default:<br />
enabled = 0<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
Hier wird der User festgelegt, dieser sollte in der oscam.user angelegt sein.<br />
<br />
Beispiel:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
<br />
==== au ====<br />
{{Optional}}<br />
Autoupdate für DVB API aktivieren/deaktivieren.<br />
Abhängig vom verwendeten User aus der oscam.user und dessen au Einstellungen.<br />
<br />
Beispiel:<br />
au = 0 # AU deaktiviert (default)<br />
au = 1 # AU aktiviert<br />
<br />
<br />
==== pmt_mode ====<br />
{{Optional}}<br />
Beispiel:<br />
pmt_mode = 0 # (verwendet camd.socket und PMT Datei)<br />
pmt_mode = 1 # (deaktiviert PMT Datei)<br />
pmt_mode = 2 # (deaktiviert camd.socket)<br />
pmt_mode = 3 # (liest PMT nur beim Start ein)<br />
pmt_mode = 4 # (do not use signal handler for monitoring /tmp)<br />
pmt_mode = 5 # (do not use signal handler for monitoring /tmp & disable camd.socket)<br />
<br />
Default:<br />
pmt_mode = 0<br />
<br />
<br />
==== request_mode ====<br />
{{Optional}}<br />
CAID request mode: <br />
<br />
Beispiel:<br />
request_mode = 0 # versuche alle möglichen CAIDs nacheinander (default) <br />
request_mode = 1 # versuche alle CAIDs simultan<br />
<br />
<br />
==== listen_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP IP port für SAT IP clients. Die Filterung muss auf der Client-Seite erfolgen!<br />
<br />
0 = disabled (default)<br />
<br />
<br />
==== boxtype ====<br />
{{Mandatory}}<br />
Verwendete Box auf der DVB API aktiviert wurde.<br />
<br />
Beispiel:<br />
boxtype = ufs910<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt||qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
Hinweis:<br />
pc steht für generic pc support (laufend supported bei VDR mit vdr-plugin-dvbapi)<br />
<br /><br />
<br />
==== cw_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
cw_delay = in Millisekunden<br />
<br />
Delay beim Schreiben des CW. default = [blank] kein Delay<br />
<br />
<br />
==== delayer ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6808:05/14/2012</span><br />
<br />
delayer = Millisekunden<br />
<br />
Minimum der Zeit, um CW zu schreiben. default: 0<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
<br />
Öffnet die demux-device nach jedem Kanalwechsel neu, default = 0<br />
<br />
<br />
==== decodeforever ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = versuche dauernd auf allen CAIDs zu decodieren<br />
0 = default<br />
<br />
<br />
==== ecminfo_type ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10722:06/13/2015</span><br />
<br /><br />
Definiert die Syntax der Ausgabe in die ecm.info . <br />
<br />
ecminfo_type = 0|1|2|3|4|5 <br />
<br />
Die möglichen Werte bedeuten:<br /><br />
0 - normale oscam syntax<br />
1 - normale oscam syntax, aber die ECMTime wird in Millisekunden anstatt Sekunden angezeigt<br />
2 - wicardd (*1)<br />
3 - mgcamd<br />
4 - cccam<br />
5 - camd3<br />
<br />
(*1)Beispiel:<br /><br />
system: Nagra<br /><br />
caid: 0x1830<br /><br />
pid: 0x1CCE<br /><br />
prov: 000000<br /><br />
cw0: FF A3 7F F1 B8 29 E7 C8<br /><br />
cw1: CB E1 A3 D3 EF FE EF C0<br /><br />
Signature OK<br /><br />
source: ServerXY (cs378x at server:12345)<br /><br />
418 msec -- Sun Jun 14 18:55:37 2015<br /><br />
<br /><br />
<br />
==== read_sdt ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10766:06/15/15</span><br />
<br />
Durch diese Option kann Oscam (mittels Dvbapi) automatisch Kanalname und Providername in die oscam.srvid bzw oscam.srvid2 sowie oscam.provid eintragen. Dazu muss man mindestens 30 Sekunden auf einem Kanal verweilen. Dabei werden allerdings nur noch nicht vorhandene Namen hinzugefügt, bereits vorhandene Einträge in den Dateien werden nicht verändert. So behält man die volle Kontrolle über den Inhalt der Dateien.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = ausgeschaltet (default)<br />
1 = eingeschaltet, aber FTA-Kanäle nicht verarbeiten<br />
2 = eingeschaltet, auch FTA-Kanäle verarbeiten<br />
<br />
==== write_sdt_prov ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10841:06/27/15</span><br />
<br />
Mit dieser Option kann man einstellen, ob die Providernamen zusätzlich in die oscam.srvid bzw oscam.srvid2 eingetragen werden sollen. Dies ist nicht unbedingt erforderlich, weil der Providername automatisch aus der oscam.provid ausgelesen wird. Für diese Option ist das Einschalten von read_sdt erforderlich.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = ausgeschaltet, Providernamen nicht in die oscam.srvid bzw oscam.srvid2 eintragen (default)<br />
1 = eingeschaltet, Providernamen eintragen<br />
<br />
=== '''Anticasc''' ===<br />
Abschnitt nur dann erforderlich, wenn Anticascading als Schutz vor unbefugtem Weiterreichen von Cardsharing angewendet werden soll.<br />
<br />
{{OSCamConfAnticascParameter}}<br />
<br />
<br />
==== enabled ====<br />
{{Mandatory}}<br />
Hiermit wird Anticascading eingeschaltet.<br />
enabled = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== numusers ====<br />
{{Optional}}<br />
Zahl der User, die je Account zugelassen sind.<br />
numusers = 1 # Es ist ein User je Account zugelassen<br />
= 0 # Anticascading ausgeschaltet (default)<br />
<br />
<br />
==== sampletime ====<br />
{{Optional}}<br />
Zeit in Minuten für das Sammeln der Anfragen<br />
sampletime = 5 # Zeitraum von 5 Minuten<br />
= # [blank] Default-Wert 2 Minuten<br />
<br />
<br />
==== samples ====<br />
{{Optional}}<br />
Zahl der Anfragen über dem Limit (mögliche Werte zwischen 2 und 10)<br />
samples = 7 # Limit bei 7 Anfragen<br />
= # [blank] Default-Wert 10 Anfragen<br />
<br />
<br />
==== penalty ====<br />
{{Optional}}<br />
Strafe für den Sünder<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
<br />
Die Strafe kann in der oscam.user überschrieben werden! <br />
<br />
'''Hinweis:''' Fake-CW`s schaden nicht nur demjenigen, dem sie schaden sollen, sondern allen anderen im Share, denn weder oscam noch cccam kann Fake-CW`s von realen CW`s unterscheiden. Wenn also ein Sharepartner von uns ein Fake-CW bekommt und der es dann für 7 Sekunden im cache hat, kann das durch cache2-Hits unbegrenzt an weitere Sharepartner gehen, auch trotz Einstellung von cccmaxhops = 0. Es haben dann unzählige User plötzlich für 7 Sekunden einen Freezer und keiner weiss, warum. Man schadet so also unbewusst allen Sharepartnern, auch denen, mit denen man nicht direkt shart!<br />
<br />
Beispiel<br />
penalty = 3 # Sende korrekte CWs zeitversetzt<br />
<br />
<br />
==== aclogfile ====<br />
{{Optional}}<br />
Dateiname für das AC-Log<br />
aclogfile =<br />
= # [blank] Kein Logfile (default)<br />
<br />
<br />
==== fakedelay ====<br />
{{Optional}}<br />
Fake-Verzögerung in Millisekunden (mögliche Werte zwischen 100 und 3000)<br />
<br />
Beispiel<br />
fakedelay = 500 # Verzögerung von 500 Millisekunden<br />
= # [blank] Default-Wert 1000 Millisekunden<br />
<br />
<br />
==== denysamples ====<br />
{{Optional}}<br />
Wieviel Samples sollen bestraft werden?<br />
<br />
Beispiel<br />
denysamples = 10 # Ab 10 Samples wird bestraft<br />
= # [blank] Default-Wert 8 Samples<br />
<br />
==== acosc_enabled ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
'''Vorbemerkung:'''<br />
mit den nachfolgenden acosc-Parametern wir ein Anticascading über das Zählen der SIDs ('''a'''nticascading '''o'''ver '''s'''id '''c'''ount) ermöglicht.<br />
<br />
acosc_enabled = 0|1<br />
1 = ermöglicht anticascading over SIDs count<br />
0 = default<br />
<br />
<br />
==== acosc_max_active_sids ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = Anzahl<br />
<br />
Maximum aktiver SIDs bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden!<br />
<br />
<br />
==== acosc_zap_limit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = Anzahl<br />
<br />
Zap-Limit bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
Strafe für den Sünder bei Anticascading over SIDs count:<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = Sekunden<br />
<br />
Dauer der Strafe bei Anticascading over SIDs count:<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
==== acosc_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_delay = Millisekunden<br />
<br />
Verzögerung bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.conf&diff=13526
OSCam/de/Config/oscam.conf
2020-02-24T17:14:20Z
<p>Felixka: /* ccc_gbx_caid */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.conf''' ==<br />
Dies ist die Hauptkonfigurationsdatei für OSCam. Sie enhält globale Parameter z.B. für das Debuggen, Loggen und den Loadbalancer, sowie einzelne Sektionen für Sondereffekte wie z.B. den Monitor, das Web-Interface, die Protokolle, das DVBapi und das Anti-Cascading. Nur die Sektion [global] ist Pflichtbestandteil, alle übrigen Sektionen sind optional (also nur bei Bedarf) zu verwenden.<br />
<br />
<br />
=== '''Globale Parameter''' ===<br />
Folgende Parameter gibt es im [global] Abschnitt:<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Ist ein Parameter leer oder wird er nicht im Konfigurationsfile angeführt dann gelten die Default-Werte!<br />
<br />
<br />
==== nice ====<br />
{{Optional}}<br />
'''Systempriorität'''. OSCam benötigt fast keine CPU-Leistung. Wenn aber CPU-Leistung benötigt wird, sollte diese sofort zur Verfügung stehen. Werte von 20 bis -20 sind möglich, wobei 20 gering und -20 sehr hoch ist. Wird der Parameter auskommentiert(#), wird diese Funktion nicht ausgerufen. Das ist wichtig z.B. für die dbox 2[http://de.wikipedia.org/wiki/DBOX2], wenn die Fehlermeldung "''relocation error:setpriority''" erscheint. Vgl. [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Beispiel:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
<br />
===== pidfile =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8176/01/24/2013</span><br />
<br />
pidfile = filename, <br />
<br />
ändere den Namen für das pidfile und den Speicherort,<br />
mit [blank] none (default)erfolgt die Speicherung als oscam.pid in /tmp<br />
<br />
Beispiel:<br />
pidfile = /var/run/oscam.pid<br />
<br />
<br />
===== logfile =====<br />
{{Optional}}<br />
Mit diesem Parameter wird Name und Pfad und für das Logfile (mehrere sind nicht möglich) festgelegt, zusätzlich auch das Loggen in stdout oder syslog. Es ist auch möglich, das Loggen nur für stdout oder syslog festzulegen und somit keine Logdatei zu schreiben.<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
Möglichkeiten:<br />
logfile = /var/log/oscam.log # Datei oder Linuxdevice (z.B. /dev/tty)<br />
logfile = syslog # Die Ausgabe wird an den syslogd übergeben<br />
logfile = stdout # Bildschirmausgabe<br />
<br />
Beispiel:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format des logfile:<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timed out<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
<br />
===== ecmfmt =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8056:01/03/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
definiert ECM log format, default:c@p/i/s/l:h:Y:t <br />
<br />
mögliche Variablen: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and cccam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , diese ID wird durch die Tierbeschreibung aus der oscam.tiers (falls vorhanden) ersetzt<br />
w = CW<br />
y = Payload (kurz, 3 Bytes)<br />
Y = Payload (lang, 6 Bytes)<br />
<br />
benutze einen Wert als Prefix, um eine Variable mit diesem Wert zu verbergen<br />
<br />
Beispiel:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w <br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn10048:11/30/13/2013</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs werden eingefügt, wenn CWs nicht ein ungleiches oder gleiches Muster haben (default)<br />
1 = disabled<br />
<br />
<br />
===== loghistorysize =====<br />
{{Optional}}<br />
loghistorysize = bytes<br />
<br />
Größe der Log-Messages-History im WebIf oder Monitor in Bytes<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) # ist nur wirksam, wenn '''preferlocalcards = 1''' in der [global] section gesetzt ist, sonst unter stage 3!<br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
Beispiel:<br />
<br />
P/2/2/2 oder L/2/4/4<br />
<br />
<br />
===== maxlogsize =====<br />
{{Mandatory}}<br />
<br />
Hier kann die maximale Größe des Logfiles in KBytes festgelegt werde. Das ist besonders wichtig für Server mit nur geringem Speicherumfang (z.B. auf dbox2). Darum wird dringend empfohlen, bei solchen Servern diese Größe sorgfältig zu bestimmen. Nicht selten "platzt" ein System, weil die Logfiles unkontrolliert riesige Ausmaße angenommen haben!<br />
<br />
Beispiel<br />
maxlogsize = 20 # Logfile geht bis zu 20 KBytes<br />
= 0 # Logfile erhält '''unbegrenzte''' Größe<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile geht bis zu 10 KBytes (default)<br />
<br />
<br />
===== logduplicatelines =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8290/02/05/2013</span> <br />
<br />
logduplicatelines = 0|1<br />
<br />
= 1 schaltet das Schreiben von Duplikatzeilen im Logfile aus<br />
= 0 schaltet das Schreiben von Duplikatzeilen im Logfile ein = default<br />
<br />
<br />
===== disablelog =====<br />
{{Optional}}<br />
Schaltet Logfile<br />
1 = Ausschalter ein, also '''kein''' Log - puh ;-) -<br />
0 = Ausschalter aus, also '''ein''' Log<br />
<br />
Beispiel:<br />
disablelog = 1 # es wird '''kein''' Log erstellt<br />
<br />
Default:<br />
disablelog = 0 # es wird '''ein''' Log erstellt<br />
<br />
<br />
===== cwlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für CW-Logging eingestellt werden. Der Pfad ist relativ zum Workdirectory und muss existieren, sonst werden keine Logs erstellt und auch keine Fehler ausgegeben.<br />
<br />
CWs (control words) sind die Antworten der Karte mit der ein bestimmter Sender für einige Sekunden freigeschaltet wird bevor das nächste cw übertragen wird. Die cw Logdatei kann dazu verwendet werden, den Sender zeitversetzt zu entschlüsseln. Das wird auch "Offline Decoding" genannt. Siehe [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
OScam erstellt für jeden Sender und jeden Tag eine neue *.cwl Datei mit Datum, Service-ID und Sendername, z.B. 110808_I000B_Sky_Cinema_+1.cwl mit diesem Inhalt:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
Wenn mindestens ein User diesen Sender schaut, werden alle notwendigen CWs gespeichert.<br />
Bitte einen Speicherort mit genügend Platz angeben, da pro Tag und Sender einge 10KB an Daten anfallen. Empfehlenswert ist ein Skript, das die logfiles regelmässig verschiebt/löscht.<br />
<br />
Beispiel:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] kein Pfad für CW-Log, Logging abgeschaltet<br />
<br />
<br />
===== emmlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für EMM-Logging eingestellt werden. Welche EMMs mitgeloggt werden sollen, kann mit den "saveemm-*"-Parametern in der oscam.server detailliert eingestellt werden.<br />
<br />
Beispiel:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] Es wird der Config-Ordner verwendet<br />
<br />
<br />
===== usrfile =====<br />
{{Optional}}<br />
Festlegung des Namens eines Files für user logging.<br />
<br />
Das user logging file hat folgendes Format<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Beispiel:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
<br />
===== disableuserfile =====<br />
{{Optional}}<br />
Jetzt wird es ganz wild: Auch wenn ein Logfile eingeschaltet ist (siehe logfile) kann hier das userfile ausgeschaltet werden.<br />
<br />
Beispiel:<br />
disableuserfile = 1 # es wird '''kein''' userfile erzeugt<br />
= 0 # es wird '''ein''' userfile erzeugt<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
<br />
===== usrfileflag =====<br />
{{Optional}}<br />
Einstellung des Logging-Modus<br />
0 = Es wird nur das Ein- und Ausloggen des Clients im Userfile geloggt<br />
1 = Jedes Zappen eines Clients wird im Userfile geloggt<br />
Default-Wert ist 0<br />
<br />
Beispiel:<br />
usrfileflag = 1 # Alles wird geloggt<br />
<br />
Default:<br />
usrfileflag = 0 # Nur Login und Logout wird geloggt<br />
<br />
<br />
===== saveinithistory =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn7128;07/02/2012</span><br />
<br />
Sicherung der Reader-Init-History. Wird benötigt, um die Entitlements anzuzeigen.<br />
<br />
Beispiel:<br />
saveinithistory = 1 # Sicherung nach /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # Keine Sicherung<br />
<br />
<br />
===== disablemail =====<br />
{{Optional}}<br />
disablemail = 0|1<br />
<br />
Schaltet das Speichern von NDS Videoguard MailMessages des Providers aus. Default: 1 (disabled)<br />
<br />
<br />
===== mailfile =====<br />
{{Optional}}<br />
mailfile = file<br />
<br />
Legt das File fest, in dem NDS Videoguard MailMessages des Providers gespeichert werden sollen.<br />
<br />
Default: [blank] kein File.<br />
<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
Delay in Millisekunden für eine Anfrage an cache exchange mode 1 reader, default: kein delay<br />
<br />
<br />
==== reader ====<br />
===== enableled =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
<br />
===== serialreadertimeout =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8541:03/13/2013</span><br />
<br />
'''Nur wenn Serialreader benutzt wird'''<br />
Timeout in Millisekunden für Serialreader<br />
<br />
Beispiel:<br />
serialreadertimeout = 1200 # Timeout nach 1200 Millisekunden<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout nach 1500 Millisekunden<br />
<br />
<br />
===== waitforcards =====<br />
{{Optional}}<br />
Hier kann festgelegt werden, ob OSCam beim Start des Programms auf lokale Karten wartet, bevor die Netzwerkports geöffnet werden.<br />
<br />
Beispiel:<br />
waitforcards = 0 # Nicht Warten<br />
<br />
Default:<br />
waitforcards = 1 # Warten<br />
<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional}}<br />
waitforcards_extra_delay = Millisekunden<br />
<br />
Zusätzliche Verzögerung in Millisekunden nach Warten auf lokale SCs während des Starts vor dem Öffnen von Netzwerk-Ports<br />
<br />
default = 500<br />
<br />
<br />
===== preferlocalcards =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9605:03/29/2014</span><br />
<br />
Der Parameter legt fest, welche Quelle zuerst für die Dekodierung verwendet werden sollen.<br />
<br />
Beispiel:<br />
preferlocalcards = 0 # lokale Karten werden wie remote Reader behandelt<br />
<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
preferlocalcards = 2 # Lokale Karten werden dem CacheEX vorgezogen<br />
<br />
Default:<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
<br />
===== readerrestartseconds =====<br />
{{Optional}}<br />
Festlegung einer Wartezeit in Sekunden zwischen Restarts von Readern.<br />
<br />
Beispiel:<br />
readerrestartseconds = 10 # Wartezeit 10 Sekunden<br />
= 0 # '''keine Readerrestarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # Wartezeit 5 Sekunden<br />
<br />
<br />
===== block_same_ip =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_ip = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit derselben IP-Addresse zurück, default = 1<br />
0 = nicht zurückweisen<br />
<br />
<br />
===== block_same_name =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_name = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit demselben Namen zurück, default = 1<br />
0 = Nicht zurückweisen<br />
<br />
<br />
==== cache ====<br />
===== cachedelay =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
<br />
===== max_cache_time =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clienten-Anfrage im cache verbleiben. Die zeit muss 2 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
===== max_cache_count =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = Anzahl, default 1000<br />
<br />
Maximale Zahl von CWs im cache<br />
<br />
<br />
===== cacheexwaittime =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
Maximale Wartezeit für einen Cache-Zugriff in Millisekunden für cacheex = 1 Reader.<br />
50 Millisekunden = default<br />
<br />
<br />
===== cacheexenablestats =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== client ====<br />
===== clienttimeout =====<br />
{{Optional}}<br />
<br />
Maximale Zeit in Millisekunden, bevor ein Client ein Timeout erhält.<br />
<br />
Beispiele:<br />
clienttimeout = 10000 # nach 10 Sekunden erfolgt ein Timeout<br />
clienttimeout = 10 # hier erfolgt aber ein Timeout bereits nach 10 Millisekunden, s. Hinweis unten!<br />
clienttimeout = 8 # der Timeout erfolgt nach 8000 Millisekunden (= 8 Sekunden), s. Hinweis<br />
Default:<br />
clienttimeout = 5000 # nach 5000 ms (=5 Sekunden) erfolgt ein Timeout<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bei Werten < 10 (also 1 bis 9) werden diese mit Eintausend multipliziert, aus "5" wird also 5000 ms. Eine eingetragene "10" bleibt aber bei zehn Millisekunden!<br />
<br />
===== clientmaxidle =====<br />
{{Optional}}<br />
Begrenzt die Leerlaufzeit eines Clienten in '''Sekunden''' bevor er vom Traffic getrennt wird.<br />
<br />
Beispiel:<br />
clientmaxidle = 200 # Trennung nach 200 Sekunden<br />
= 0 # Begrenzung ist ausgeschaltet, keine Trennung vom Traffic beim Leerlauf!<br />
<br />
Default:<br />
clientmaxidle = 120 # Trennung nach 120 Sekunden<br />
<br />
<br />
===== suppresscmd08 =====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
suppresscmd08 = 0 # Mitteilung an Clienten mit den Protokollen camd 3.5x, 3.57x und 3.78x, keine neuen Anfragen wegen <br />
zurückgewiesener Kombination aus CAID, SID und Provider-ID zu schicken (default)<br />
= 1 # Anfragen sollen weiterhin geschickt werden<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
<br />
==== fallbacktimeout ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Bei mehreren Readern (Siehe Abschnitt [reader] in oscam.server) kann ein Reader bestimmt werden, auf den z.B. bei einer Störung der übrigen Reader der traffic zurück fällt.<br />
<br />
Maximale Wartezeit des [[Cardserver]]s in Millisekunden auf primäre [[Reader]], bevor der/die [[Fallback]]-Reader (falls vorhanden!) befragt werden.<br />
<br />
Beispiel:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Der Wert muss größer dem Wert von "serialreadertimeout" gewählt werden, ansonsten werden die Standardwerte verwendet.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = Millisekunden<br />
<br />
Wartezeit in Millisekunden, bevor der für eine CAID reservierte [[Reader]] befragt wird.<br />
<br />
Default = 2500<br />
<br />
<br />
==== sleep ====<br />
{{Optional}}<br />
Alle User nach "n" Minuten "inaktivieren", wenn diese den Sender nicht innerhalb der eingestellten Zeit wechseln. Diese Einstellung kann auch für jeden User separat vorgenommen werden: [[OSCam/de/Config/oscam.user#sleep]]<br />
<br />
Beispiel:<br />
sleep = 240 # inaktiv nach 4 Stunden<br />
<br />
Default:<br />
sleep = # [blank]<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam hört auf ALLE IP Adressen.<br />
<br />
<br />
==== bindwait ====<br />
{{Optional}}<br />
Maximale Zeit in Sekunden, die der [[Cardreader]] beim Start wartet, bis er den jeweiligen Netzwerk-Port in Zugriff bekommt. Falls der OSCam innerhalb dieser Zeit den Port nicht binden kann, terminiert er mit "Bind Request failed". Ursachen dafür sind<br />
* Doppelbelegung von Ports<br />
* Ein vormals abgestürzter OSCam der die Ports nicht wieder freigegeben hat<br />
* OSCam wurde mehrmals gleichzeitig gestartet<br />
<br />
Beispiel:<br />
bindwait = 20 # Wartezeit 20 Sekunden<br />
<br />
Default:<br />
bindwait = 120 # Wartezeit 120 Sekunden<br />
<br />
<br />
==== netprio ====<br />
{{Optional}}<br />
Hier kann die Priorität des Cardservers im Netzwerk festgelegt werden<br />
<br />
Beispiel:<br />
netprio = 1 # Prioritätsstufe 1<br />
<br />
Default:<br />
netprio = 0 # Systembedingte Priorität<br />
<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional}}<br />
Art der DNS-Auflösung. Dies sind zwei verschiedene libc-Aufrufe für die Namensauflösung, weil einige ältere Systeme Probleme mit der moderneren Implementierung ''getadressinfo'' haben bzw. diese Funktion aus ihren Images gestrippt wurden (zB die alte dBox2). Außerdem ist ''getadressinfo'' threadsafe, während ''gethostbyname'' es nicht ist und deshalb locks drumherum im Code benötigt. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Beispiel:<br />
resolvegethostbyname = 1 # Name wird mittels ''gethostbyname'' aufgelöst<br />
<br />
Default:<br />
resolvegethostbyname = 0 # ''getadressinfo'' wird benutzt<br />
<br />
<br />
====failbancount====<br />
{{Optional}}<br />
Failbancount = Anzahl der erlaubten Fehlversuche mit falschen Zugangsdaten. <br />
= 0 (default) IP wird sofort beim ersten Versuch mit unbekannten Zugangsdaten gesperrt!<br />
<br />
Wenn innerhalb '''failbantime''' mehr als in '''failbancount''' erlaubte Versuche registriert wurden, wird die IP für die restliche failbantime gesperrt. Nach Ablauf von failbantime stehen wieder volle failbancount zur Verfügung. Failbancount ist also eine Lockerung der Regeln<br />
<br />
<br />
==== failbantime ====<br />
{{Optional}}<br />
Zeitspanne in Minuten, für die ein Client mit ungültigem Login-Versuch auf IP-Basis geblockt wird.<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP Adresse wird für 5 Minuten geblockt. Neue Loginversuche werden ignoriert auch wenn das Login OK wäre.<br />
# Es wird kein Clientthread erstellt.<br />
<br />
Default:<br />
failbantime = 0 # failban ist ausgeschaltet (default)<br />
<br />
<br />
==== dropdups ====<br />
{{Optional}}<br />
Möglichkeiten zur Duplizierung von Client-Verbindungen. Es wird damit die Reaktion auf den [[OSCam/de/Config/oscam.user#uniq|uniq]]-Parameter festgelegt.<br />
<br />
0 = Markierung des Clienten als Duplikat aber keine Trennung (default)<br />
1 = Abbrechen der Duplikat-Verbindung anstelle einer Markierung als Duplikat<br />
<br />
<br />
==== unlockparental ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7289:08/27/2012</span><br />
<br />
'''Nur Seca und Viaccess'''<br />
<br />
Option zum Ausschalten der Jugendschutzfunktion für Seca und Viaccess Pin Code Anfragen bei adult movies.<br />
Bei Viaccess z.B. für die Redlight Elite HD Smartcard. Mit unlockparental = 0 bleibt Dorcel Dunkel mit 1 wirds hell!<br />
<br />
Beispiel:<br />
unlockparental = 1 # Jugendschutzfunktion ausgeschaltet<br />
<br />
Default:<br />
unlockparental = 0 # Jugendschutzfunktion von Seca und Viaccess eingeschaltet<br />
<br />
<br />
==== double_check ====<br />
{{Optional}}<br />
'''Nur wenn CW double check ausgewählt ist!'''<br />
<br />
ECM wird zu 2 oder mehr Readern mit der selben SC gesandt und die CW's werden gegeneinander verifiziert. lb_nbes_reader muss auf 2 oder höher gesetzt werden.<br />
<br />
Beispiel:<br />
double_check =<br />
<br />
Default:<br />
double_check = 0<br />
<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|erste 2 digits von CAID1],[CAID2|erste 2 digits von CAID2],... = [blank] keine [default]<br />
<br />
ECM wird an 2 oder mehr Reader mit der gleichen SC gesendet und die CW's werden gegen andere definierte CAIDs oder die ersten 2 bytes der CAIDs verifiziert. lb_nbest_readers muss auf 2 oder höher gesetzt sein!<br />
<br />
<br />
==== Loadbalancer ====<br />
===== lb_mode =====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Wenn hier loadbalancing aktiviert wird, dann sind die in oscam.server bei services stehenden Besonderheiten zu beachten. Siehe [[streamboard:wiki/OSCam/de/Config/oscam.server#services|Services]]!<br />
<br />
Loadbalance Mode<br />
<br />
Wenn man zwei oder mehrere gleiche Karten hat (egal ob lokal oder als Proxie), kann man die Last auf diese Karten gleichmäßig verteilen (balancieren).<br />
<br />
Beispiel:<br />
lb_mode = 0 (deaktiviert) (default)<br />
lb_mode = 1 (schnellster Reader zuerst)<br />
lb_mode = 2 (Reader der am längsten nicht geantwortet hat wird genommen)<br />
lb_mode = 3 (Reader mit der geringsten Auslastung wird verwendet)<br />
lb_mode = 10(LB ist ausgeschaltet, Senderstatistik wird trotzdem erstellt)<br />
<br />
Default:<br />
lb_mode = 0 # deaktiviert<br />
<br />
<br />
===== lb_save =====<br />
{{Optional}}<br />
Speichert die Loadbalance Statistik, damit sie auch nach einem Neustart erhalten bleibt.<br />
Um die CPU nicht zu sehr zu belasten, sollte hier ein Wert > 100 eingetragen werden.<br />
<br />
Beispiel:<br />
lb_save = 100 # Anzahl der ECM's nach der die Statistik gespeichert wird<br />
<br />
Default:<br />
lb_save = 0 # Statistik wird nicht gespeichert<br />
<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional}}<br />
Anzahl der Reader, die für die ECM anfragen.<br />
<br />
Beispiel:<br />
lb_nbest_readers = 2 # Anfragen gehen immer an zwei Reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # Anfrage geht nur an einen Reader<br />
<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional}}<br />
Anzahl der Fallback Reader für den Lastenausgleich.<br />
<br />
Beispiel:<br />
lb_nfb_readers = 2 # Zwei Fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1<br />
<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mod<br />
= 0 # Standardverfahren zum (späten) Wiederöffnen blockierender Reader (default)<br />
= 1 # Schnelles Wiederöffnen blockierender Reader<br />
<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5893:08/19/2011</span><br />
<br />
Anzahl der Reader je CAIDs für das Loadbalancing, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Default:<br />
lb_nbest_percaid = 0<br />
<br />
Beispiel:<br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wird so lange blockiert, bis die Statistik aufgeräumt ist<br />
1 = default<br />
<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = öffne alle gestoppten Reader sofort, wenn kein funktionierender Reader gefunden wird<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional}}<br />
Mindestanzahl der ECM's, die für die Auswertung genommen werden.<br />
<br />
Beispiel:<br />
lb_min_ecmcount =<br />
<br />
Default:<br />
lb_min_ecmcount = 5<br />
<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional}}<br />
Maximale Anzahl der ECM's, bevor der Loadbalancer zurückgesetzt wird.<br />
<br />
Beispiel:<br />
lb_max_ecmcount =<br />
<br />
Default:<br />
lb_max_ecmcount = 500<br />
<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional}}<br />
Zeitspanne in Sekunden zwischen neuem Verbindungsversuch zu verlorengegangenen readern/CAIDs/providers/services<br />
<br />
Beispiel:<br />
lb_reopen_seconds = 500 # Nach 500 Sekunden neuer Verbindungsversuch<br />
<br />
Default:<br />
lb_reopen_seconds = 900<br />
<br />
<br />
===== lb_retrylimit =====<br />
{{Optional}}<br />
Verbindungsversuch zum nächsten reader '''nur wenn''' die Antwortzeit höher, als hier festgelegt in '''Millisekunden'''.<br />
<br />
Beispiel:<br />
lb_retrylimit = 500 # Verbindungsversuch zum nächsten reader nur, wenn die Antwortzeit höher als 500 ms ist.<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
<br />
===== lb_savepath ===== <br />
{{Optional}}<br />
Dateiname für die Sicherung der Loadbalancing Statistiken<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional}}<br />
Zeit in Stunden, nach der die Statistiksätze gelöscht werden sollen<br />
<br />
default = 336<br />
<br />
<br />
===== lb_use_locking =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6166:12/28/2011</span><br />
<br />
Unterdrückt parallele und identische ECM-Anfragen<br />
<br />
1 = ein<br />
0 = aus # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* Man sollte diese Option nur anschalten wenn:<br />
** Langsames system<br />
** Hohe Last<br />
**Gleiche ECM Anfragen nicht aus dem Cache kommen, sondern weiter Reader angefragt werden<br />
<br />
* Vorteile aktiviert:<br />
** Durch die Synchronisierung wird ein ECM Request nach dem anderen durchgeführt, die Ermittlung von Cache oder Request und Zuordnung der Reader über den Loadbalancer ist immer erfolgreich<br />
<br />
* Nachteile aktiviert:<br />
** Die Synchronisierung verhindert Multithreading und es kommt eventuell zu höheren Antwortzeiten<br />
<br />
* Vorteile NICHT aktiviert:<br />
** Schnellere Durchlaufzeiten für ECM requests<br />
<br />
* Nachteile NICHT aktiviert:<br />
** Eventuell doppelte (bzw n-fache) ECM requests an die Reader möglich<br />
<br/><br />
<br />
<br />
===== lb_retrylimits =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,CAID2:time2]...<br />
<br />
Begrenzung der Zeit für einen retry des loadbalancing eines CAID in Millisekunden, wildcard CAIDs mit two-digit CAIDs möglich, <br />
<br />
default: [blank]<br />
<br />
Beispiel:<br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
Ignoriere die Providerinformations-CAIDs, um die statistischen Daten zu reduzieren, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Beispiel:<br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx und 34xx)<br />
<br />
default = [blank]<br />
<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # ermöglicht ein automatisches timeout auf der Basis von Statistiken des Loadbalancers<br />
= 0 # default<br />
<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = Prozent<br />
<br />
Prozentwert, mit dem die Timeout-Zeit beaufschlagt wird<br />
default = 30<br />
<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = Millisekunden<br />
<br />
Minimale Zeit in Millisekunden, die zur Timeout-Zeit hinzuaddiert wird<br />
default = 300<br />
<br />
<br />
===== lb_max_readers =====<br />
{{Optional}}<br />
lb_max_readers = limit (Zahl)<br />
<br />
beschränkt die Zahl der Reader während der Lernphase des Loadbalancing<br />
<br />
0 = unbegrenzt (default)<br />
x = beschränkt auf ein Limit von x (Zahl)<br />
<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional}}<br />
lb_auto_betatunnel = 0|1<br />
<br />
Ermöglicht automatisches Betatunneling für Betacrypt (CAIDs 1801, 1833, 1834 und 1835), wenn Loadbalancing verwendet wird<br />
lb_auto_betatunnel = 0 # ausgeschaltet<br />
= 1 # eingeschaltet (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Eintragungen für Betatunnel in oscam.user werden bevorzugt. Siehe [[streamboard:wiki/index.php/OSCam/de/Config/oscam.user#betatunnel|Betatunnel]]<br />
<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
setzt den Mode für das automatische Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only)<br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = Auswahl (Zahl)<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = immer Betacrypt<br />
105 = wählt einen Mittelwert<br />
200 = immer Nagravision<br />
<br />
<br />
=== '''Monitor''' ===<br />
Hier sind nur dann Eintragungen erforderlich, wenn ein Monitor benutzt wird!<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
UDP-Port für den Monitor<br />
port = 0 # Kein Monitor<br />
= # [blank] Portnummer Monitor ausgewählt<br />
<br />
Beispiel:<br />
port = 24480 # Monitor eingeschaltet mit Port 24480<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Service mit einer bestimmten IP-Adresse verbinden<br />
serverip = # IP-Adresse<br />
= # [blank] alle IP's (default)<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Unverschlüsselte Monitorverbindungen.<br />
<br />
Möglich<br />
* eine oder mehrere IP-Einzeladressen<br />
* eine oder mehrere IP-Bereiche<br />
* eine Mischung von IP-Einzeladressen oder IP-Bereichen<br />
<br />
Beispiel<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 und IP-Bereich 192.168.0.0 bis 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] keine unverschlüsselte Monitorverbindung.<br />
<br />
<br />
==== aulow ====<br />
{{Optional}}<br />
Zeitraum in Minuten, in dem keine EMM erscheinen, so dass der Client von "active" auf "on" gesetzt wird.<br />
<br />
Beispiel<br />
aulow = 30 # Nach 30 Minuten ohne EMM wird der Status von "active" auf "on" gesetzt (default).<br />
<br />
<br />
==== monlevel ====<br />
{{Optional}}<br />
Monitor-Level<br />
0 = Kein Zugriff auf Monitor (default)<br />
1 = Nur Server und eigene Prozeduren<br />
2 = Alle Prozeduren, aber nur ansehen<br />
3 = Alle Prozeduren, reload von oscam.user möglich<br />
4 = Unbeschränkter Zugriff<br />
<br />
Beispiel<br />
monlevel = 4 # Kompletter Zugriff<br />
<br />
Monlevel kann durch Eintragungen in oscam.user überschrieben werden!<br />
<br />
<br />
==== hideclient_to ====<br />
{{Optional}}<br />
Zeitspanne in Sekunden für das Ausblenden von Clients, die keine Anfragen senden. Siehe auch Parameter '''httphideidleclienst''' in Abschnitt [webif].<br />
hideclient_to = 40 # Clienten werden nach 40 Sekunden ohne Anfrage ausgeblendet<br />
= 0 # Keine Ausblendung von Clienten im Leerlauf<br />
<br />
<br />
==== appendchaninfo ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8546:03/13/2013</span><br />
<br />
Fügt die Channel-Info aus der oscam.services der Log-Meldung hinzu. Bei Verwendung von Monitor und Webinterface ist dies eine sehr nützliche Routine!<br />
appendchaninfo = 1 # Die Channel-Info wird hinzugefügt<br />
= 0 # Keine Channel-Info (default)<br />
<br />
<br />
=== '''lcd''' ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
<br />
==== lcd_outputpath ====<br />
{{Optional}}<br />
Hier kann ein Pfad für den LCD-Output eingestellt werden<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
<br />
==== lcd_hideidle ====<br />
{{Optional}}<br />
Verbergen eines Readers im LCD-Output während des Leerlaufs<br />
<br />
lcd_hideidle = 1 # Verbergen, wenn der Leerlauf länger als 20 Sekunden dauert<br />
= 0 # default<br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional}}<br />
LCD-Refresh-Interval in Sekunden (Minimum 5 Sekunden)<br />
<br />
Default:<br />
lcd-writeinterval = [blank] 10 Sekunden<br />
<br />
<br />
=== '''WebIf''' ===<br />
Eintragungen sind nur dann erforderlich, wenn das Web-Interface (by Alno) als Modul ausgewählt wurde.<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
<br />
==== Dateiformat zum Senden von EMMs via Webinterface ====<br />
(von Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' <br />
<br />
* Die Datei muß im TXT Format sein.<br />
* Jedes PRE-CAM EMM muss in einer eigenen Zeile vorliegen.<br />
* Die EMMs müssen im HEX Format vorliegen.<br />
** Beispiel: AABBCCDD...<br />
* Leerzeichen und Tabs zwischen den bytes sind erlaubt:<br />
** AA BB CC DD...<br />
* Groß- und/oder Kleinschreibung oder gemischte Schreibweise für jeden HEX-Wert sind erlaubt:<br />
** AA aa Aa aA...<br />
* Andere Zeichen oder Kommentare sind nicht erlaubt.<br />
<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
Port, auf dem das Webinterface hört.<br />
Standard ist Port 8888 wenn kein eintrag erfolgt<br />
<br />
httpport = 83 # Webinterface hört auf '''http-port 83'''<br />
= +83 # Webinterface hört auf '''https-port 83''' (SSL)<br />
0 # Webinterface ist ausgeschaltet<br />
<br />
<br />
==== httpcert ====<br />
{{Optional}}<br />
Datei für das SSL-Zertifikat<br />
httpcert = oscam.cert # (siehe dort!)<br />
= # [blank] es wird die Datei oscam.pem (embedded) verwendet<br />
<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
Beispiel<br />
httpforcesslv3 = 0 (default)<br />
= 1 benutze SSLv3<br />
<br />
<br />
==== httpuser ====<br />
{{Mandatory}}<br />
Name des Users für den Zugriffsschutz. Es wird zwar [blank] als Default-Wert angeboten. Davon wird aber dringend abgeraten; daher wird dieser Parameter hier als '''zwingend''' beschrieben.<br />
httpuser = # xyxyxy<br />
<br />
<br />
==== httppwd ====<br />
{{Mandatory}}<br />
Passwort für den Zugriffsschutz. Es gilt das gleiche wie für httpuser.<br />
httppwd = # 123456<br />
<br />
'''Die Parameter ''user'' und ''pwd'' werden beim Verbindungsaufbau zum Webinterface in einem Kontrollfenster abgefragt. Fehlen sie oder sind sie fehlerhaft, erfolgt die Meldung ''Forbidden'' und der Verbindungsaufbau wird abgebrochen!'''<br />
<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6825:05/15/2012</span><br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Füge den content des embedded CSS '''nicht vor''' dem content des user-css ein (default)<br />
1 # Embedded CSS wird '''vor''' dem externen CSS hinzugefügt(siehe nächsten Parameter: [[#httpcss|httpcss]])<br />
<br />
Dieser Parameter kann dazu benutzt werden, den embedded CSS mit custom styles zu überschreiben. Die laufenden CSS styles können hier angeschaut werden: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
<br />
==== httpcss ====<br />
{{Optional}}<br />
Für das Webinterface stehen verschiedene Styles in unterschiedlicher farblicher und graphischer Darstellung zur Verfügung. Der User kann die für ihn interessanten Style-Dateien (.css) speichern und je nach "Stimmung" verwenden. Hier wird der Pfad zu den Style-Dateien festgelegt.<br />
<br />
Beispiel<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] es wird der embedded Style verwendet (default)<br />
<br />
Styles werden hier veröffentlicht: [[streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
<br />
==== httptpl ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7083:06/25/12</span><br />
<br />
Pfad für externe templates und picons<br />
httptpl =<br />
= # [blank] Keine externen Templates<br />
<br />
Multiple simultane templates und picons können durch die Anlage von Unterordnern (mit max. 32 alphanumerischen Zeichen) zur Verfügung gestellt werden. Der Name des Unterordners korrespondiert mit dem Unterordner in der URL, default : [blank]<br />
<br />
Beispiele<br />
<br />
httptpl = /this/is/my/path <br />
<br />
Ordner mit multiplen templates: <br />
/this/is/my/path/template1 <br />
/this/is/my/path/template2 <br />
<br />
gültige URLs: <br />
http://host:port/template1 <br />
http://host:port/template2 <br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httpoverwritebakfile ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = überschreibe backup configurations files (*.bak)<br />
0 = default<br />
<br />
<br />
==== httplocale ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
hier kann ein "locale environment" gesetzt werden.<br />
<br />
default = [blank] kein environment<br />
<br />
Siehe auch hier:<br />
<br />
http://de.wikipedia.org/wiki/locale<br />
<br />
<br />
==== httpjscript ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
Path für oscam.js javascript, default : [blank]<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional}}<br />
Aktualisierungszeit in Sekunden, in der die (kompletten) Seiten des Webinterfaces aktualisiert werden<br />
httprefresh = 7 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httppollrefresh ====<br />
{{Optional}}<br />
<br />
Initialisierungszeit des Pollings und Aktualisierungszeit, in der diverse Daten des Webinterfaces neugeladen werden (Zeit kann auf den entsprechenden Seiten geändert werden)<br />
httppollrefresh = 60 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httpshowpicons ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # zeige picons in userlist<br />
0 # default<br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httphideidleclients ====<br />
{{Optional}}<br />
Dieser Parameter ermöglicht es, einen Clienten nach Ablauf der im Parameter '''hideclient_to''' im Abschnitt [monitor] festgelegten Leerlauf-Zeitspanne (siehe dort!) auszublenden.<br />
httphideidleclients = 1 # Ausblenden<br />
= 0 # Nicht ausblenden (default)<br />
<br />
==== httphidetype ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
Buchstabe der definiert, welcher type in der type-column auf der Statusseite des Webinterfaces versteckt werden soll. <br />
s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
<br />
==== httpscript ====<br />
{{Optional}}<br />
Pfad für Skripte, die vom Webinterface aus gestartet werden können<br />
httpscript = # Pfad<br />
= # [blank] kein Pfad<br />
<br />
<br />
==== httpallowed ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8842:08/17/2013</span><br />
<br />
Hier werden IP-Addressen, IP-Bereiche oder beides festgelegt, die auf das Webinterface zugreifen dürfen. Es wird zwar auch ein [blank] als Default-Wert angeboten, dessen Sinn sich aber nicht erschließt! Wenn das Webinterface benutzt werden soll, dann muss es auch die Möglichkeit geben, sich mit ihm zu verbinden. Daher wird dieser Parameter als '''zwingend''' dargestellt.<br />
<br />
Wenn ein localhost nach '''IPv6''' aufgelöst werden soll, muss die Zeile mit '''::1''' abgeschlossen werden!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
Beispiel<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen <br />
und werden nach IPv6 aufgelöst<br />
'''Default Werte'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255,::1<br />
<br />
<br />
==== httpdyndns ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6558:03/21/12</span><br />
<br />
Zulassen von DYNDNS-Verbindungen durch das Webinterface.<br />
<br />
httpdyndns = hostname[,hostname][,hostname]<br />
<br />
Beispiel<br />
httpdyndns = host1.exemple.com, host2.exemple.com<br />
<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional}}<br />
Sicherung der Konfigurationsdateien<br />
httpsavefullcfg = 0 # alle nicht leeren Parameter,<br />
# alle nicht Default-Parameter,<br />
# alle Parameter, die nicht den gleichen Inhalt enthalten wie dieselben Parameter in [global] (default).<br />
1 # alle Parameter<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional}}<br />
<br />
Über das Webinterface können in bestimmtem Unfang Konfigurations-Dateien editiert und gesichert werden. Das ist für den Server-Admin, der sich nicht immer in der Nähe zur Konsole des Servers befindet, sehr vorteilhaft. Wenn aber weitere User oder andere Beteiligte ebenfalls Zugang zum Webinterface und damit Zugriff auf die Daten haben, kann das zu einem Problem werden. Die Möglichkeit des Editierens (Schreibens) kann daher mit diesem Parameter ausgeschaltet werden.<br />
httpreadonly = 1 # nur Lesezugriff möglich<br />
= 0 # alles ist möglich (default)<br />
<br />
<br />
==== httpiconpath ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9463/01/28/2014</span><br />
<br />
httpiconpath = path<br />
<br />
Pfad zur Picon-Datei, default [blank] none<br />
<br />
<br />
==== httphelplang ====<br />
{{Mandatory}}<br />
httphelplang = de|en|fr|it<br />
<br />
Auswahl der Sprache für die Kontexte<br />
<br />
de = deutsch<br />
en = englisch<br />
fr = französisch<br />
it = italienisch<br />
[blank] = englisch (default)<br />
<br />
<br />
==== httposcamlabel ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
Setzt ein individuelles label für den header des Webinterfaces, default: OSCam rXXXX<br />
<br />
<br />
=== '''Cache''' ===<br />
{{OSCamConfCacheParameter}}<br />
<br />
<br />
==== delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
<br />
==== max_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
max_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clientanfrage im Cache verbleiben. Die Zeit muß 3,5 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
==== max_hit_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8910:09/10/2013</span><br />
<br />
max_hit_time = in Sekunden<br />
<br />
Maximale Zeit, die Treffer für cache exchange im cache verbleiben müssen um wait_time zu evaluieren, default: 15<br />
<br />
<br />
==== wait_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Wartezeit und Dynamische Wartezeit in Millisekunden für cache exchange und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
<br />
= [blank] none (default)<br />
<br />
'''Info:'''<br />
awtime --> Zeit die bei jeder Anfrage gewartet wird (always wait time)<br />
dwtime --> Zeit die bei positivem Fund eines CWs im Cache gewartet wird (dynamic wait time)<br />
<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
<br />
Verwendungspraxis:<br />
wait_time = 098C:5:130,09C4:5:130,1702:5:1900,1830:5:490,1843:5:490,0D05:5,0B00:5<br />
<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional}}<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode (bestimmt die Verwenung des Parameters ''counter'')<br />
<br />
0 = Falls ''wait_time'' abgelaufen ist, sende das CW mit dem höchsten counter an die clients<br />
1 = Niemals ein CW (von cacheex) aus dem cache versenden, wenn der counter aus dem cacheex den in diesem Parameter <br />
gesetzten counter nicht erreicht. Falls ''wait_time'' erreicht ist, geht der request an normale reader. <br />
Nur wenn ein CW den gesetzten counter erreicht, wird es an die clients gesendet.<br />
Default = 0<br />
<br />
<br />
* counter (bestimmt den counter des CW, der mindestens erreicht werden muss, um versendet zu werden)<br />
<br />
Default = 1 (benutze das CW mit dem höchsten counter aus dem cache)<br />
<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = erlaube bad cw's von einem festgelegten fallback reader. Default = 0<br />
<br />
<br />
'''Info:'''<br />
<br />
Bei '''aktiviertem''' Parameter wird bei einem bad CW die Anfrage an den fixed Fallback weitergeleitet<br />
und somit ein freetzer meist verhindert.<br />
<br />
<br />
Siehe --> [[OSCam/de/Config/oscam.server#fallback|fallback]]<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== csp_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von CSP-Nodes hört<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Lokale Bind-IP für csp_port (siehe oben)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 ausgeschaltet (default)<br />
= 1 eingeschaltet<br />
<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Für NDS Karten nur in einer light Version verfügbar''' <br />
<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID, für die der CW-Cycle-Check ermöglicht werden soll, [blank] = kein Check (Default)<br />
<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = Zahl<br />
<br />
Maximum von CW-Cycle-Entries in die Liste, default = 500, maximum = 4000<br />
<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = Minuten<br />
<br />
Minimalzeit, die ein erkannter Cycle in der Memory verbleiben soll, default = 15, maximum = 240<br />
<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = ungültige CW-Cycle kommen nur ins Log <br />
1 = ungültige CW-Cycle werden gedropped (default)<br />
<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, 1 = alte CW-Cycle werden gedropped, 0 = kein Dropping (default)<br />
<br />
<br />
==== cwcycle_sensitive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (oder mehr) gleiche bytes und drop neues CW<br />
3 = 3 (oder mehr) gleiche bytes und drop neues CW<br />
4 = 4 (oder mehr) gleiche bytes und drop neues CW<br />
<br />
--> Höherer Wert entspricht höherer Empfindlichkeit<br />
<br />
<br />
==== cwcycle_usecwcfromce ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = benutze CW Info aus cache exchange<br />
0 = default<br />
<br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
antworte, wenn das cache exchange timeout erreicht ist und keine normalen Reader zur Verfügung stehen, die ECM's senden:<br />
<br />
0 = sende sofort '''not found''' an den client (default)<br />
1 = warte auf eine Antwort für cache exchange bis der timeout für den client erreicht ist<br />
<br />
<br />
=== '''csp (UDP''') ===<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:02/16/2013 Siehe Section '''[cache]'''!</span><br />
<br />
Abschnitt nur dann erforderlich, wenn csp als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von csp-nodes hört<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
Local Bind IP für den oben genannten UDP-Port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== wait_time ====<br />
{{Mandatory}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET Siehe Section '''[cache]'''!</span><br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8060:01/04/13</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8077:01/06/13</span><br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
= [blank] none (default)<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
Wartezeit in Millisekunden für cache exchange ('''nur mode 2&3''') und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
=== '''Camd 33 (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn camd33 als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd 33 Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein Adressbereich, der unverschlüsselt übertragen wird.<br />
<br />
Beispiel:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt =<br />
<br />
<br />
==== passive ====<br />
{{Optional}}<br />
Definition für aktiven oder passiven Client. Generell geht das Camd3.3x-Protokoll von einem aktiven Client aus. Es kann aber unter bestimmten Umständen bei manchen Clients (meistens plugin) zur Schwierigkeiten kommen. In diesem Fall<br />
<br />
Beispiel:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
<br />
==== key ====<br />
{{Optional}}<br />
<br />
Schlüssel, der für die Verschlüsselung verwendet wird. (128bit Verschlüsselung)<br />
<br />
Beispiel:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key =<br />
<br />
<br />
=== '''cs357x (UDP)''' ===<br />
Abschnitt nur dann erforderlich, wenn cs357x als Client Protokoll verwendet wird.<br />
Dieses Protokoll verschlüsselt grundsätzlich und bildet den Schlüssel aus dem Benutzernamen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:'''<br />
'''cs357x''' wurde auch als '''camd35''' bezeichnet. Beide Bezeichnungen meinen das gleiche Protokoll mit den gleichen Funktionsweisen und Parametern. Künftig wird zur Vermeidung von Irritationen '''nur noch cs357x''' verwendet.<br />
<br />
Eine genauere Erklärung für UDP findet Ihr hier [http://de.wikipedia.org/wiki/User_Datagram_Protocol]<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus cs357x Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs357x -clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Tread]]<br />
<br />
<br />
=== '''cs378x''' (TCP) ===<br />
Abschnitt nur dann erforderlich, wenn cs378x als Client Protokoll notwendig ist.<br />
<br />
Eine ausführliche Erklärung von TCP findet Ihr hier [http://de.wikipedia.org/wiki/Transmission_Control_Protocol]<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein das OSCam nur antwortet wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs3.78x-clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
<br />
=== '''Newcamd (TCP)''' ===<br />
Abschnitt nur dann erforgerlich, wenn newcamd als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
<br />
==== key ====<br />
{{Mandatory}}<br />
Schlüssel für die Newcamd Verbindung zum Client.<br />
<br />
Beispiel:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Newcamd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000@1234:000000 # (CAID 1234 ist über Port 15000 erreichbar)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 ist über Port 15000 erreichbar CAID 5678 über Port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Hat der Server mehrere IP Adressen werden nur Anfragen die an die konfigurierte IP gehen beantwortet.<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein bestimmter IP Bereich der sich auf den Newcamd Server verbinden darf.<br />
<br />
Beispiel:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed =<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
Der Server versucht, die Newcamd Verbindung am leben zu halten.<br />
<br />
Beispiel:<br />
keepalive = 1 # (aktiviert)<br />
keepalive = 0 # (deaktiviert)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
<br />
==== mgclient ====<br />
{{Optional}}<br />
Aktiviert das Extendet Newcamd Protokol, um mehrer CAID's über einen Port zu schicken<br />
<br />
Beispiel:<br />
mgclient = 1 # (aktiviert)<br />
mgclient = 0 # (deaktiviert)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br />
=== '''scam''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9878:09/29/2014</span><br />
<br />
Abschnitt nur dann erforderlich, wenn scam als Client-Protocol verwendet wird.<br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
port = port<br />
<br />
UDP-Port für scam server, default = 0<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
=== '''Radegast''' ===<br />
Abschnitt nur dann erforderlich, wenn Radegast als Client-Protokoll notwendig ist.<br />
<br />
{{OSCamConfRadegastParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
TCP/IP-Port für Radegast-Clients. Mit dem Eintrag wird das Radegast-Protokoll enabled.<br />
port =<br />
= 0 (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
<br />
Username des Radegast-Client<br />
user = username<br />
<br />
<br />
=== '''Serial''' ===<br />
Abschnitt nur dann erforderlich, wenn eine serielle Reader-Schnittstelle notwendig ist.<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
<br />
==== device ====<br />
{{Optional}}<br />
<br />
Parameter der Device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = Name der Serial Device<br />
option = timeout = Millisekunden Timeout für die Verbindung default: 50<br />
= delay Millisekunden Zusätzliche Verzögerung zwischen 2 Characters<br />
<br />
Unterstützte Serial Devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
<br />
=== '''Cccam (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn Cccam als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCccamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6206:01/07/2012</span><br />
<br />
TCP/IP-Ports für CCcam-Clients. Mit dem Eintrag eines oder mehrerer Ports wird das CCcam-Protokoll enabled.<br />
<br />
port = 0|port[,port...]<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled<br />
<br />
<br />
==== version ====<br />
{{Optional}}<br />
Definiert die Version von CCcam, mindestens Version 2.0.11, Default-Wert = 0<br />
<nowiki><main version>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
version = 2.0.11<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
==== reshare ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Reshare-Level<br />
-1 = kein Resharing<br />
0 = nur Reshare für Direct-Peer<br />
1 = Reshare für Direct-Peer und den nächsten Level<br />
x = Reshare für Direct-Peer und die nächsten x Level (x steht für die Zahl der Level)<br />
<br />
Beispiel<br />
reshare = 1 Reshare nur für Direct-Peer und den nächsten Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
==== reshare_mode ====<br />
{{Optional}}<br />
Arten des reshare:<br />
0 = reader reshared nur empfangene SCs für CCcam-reader<br />
1 = reader reshared empfangene SCs (wie=0) und definierte services<br />
2 = reader reshared nur definierte reader-services als virtueller SC<br />
3 = reader reshared nur definierte user-services als virtueller SC<br />
<br />
<br />
==== ignorereshare ====<br />
{{Optional}}<br />
CCcam Reshare-Einstellungen<br />
0 = benutze die Reshare-Einstellungen des Servers (default)<br />
1 = benutze die Reshare-Einstellungen des Readers oder Users<br />
<br />
Beispiel<br />
ignorereshare = 1 Die Reshare-Einstellungen des Readers oder Users werden benutzt<br />
<br />
<br />
==== stealth ====<br />
{{Optional}}<br />
Versteckt aktive user und das extended OSCam-Protokoll. Schützt andere OSCam-user davor, den Server als OSCam-Server zu entdecken!<br />
stealth = 1 # Tarnung eingeschaltet<br />
= 0 # Tarnung aus (default)<br />
<br />
<br />
==== minimizecards ====<br />
{{Optional}}<br />
Modus der Verbindung von CCcam-Servern zu CCcam-Clienten<br />
0 = Keine Aggregation, nur Duplikate werden entfernt (default)<br />
1 = Basierend auf Minimum-Hop: zwei SC's mit unterschiedlichen hops werden zusammengefasst, neue SC's bekommen einen kleineren hop<br />
2 = Aggregation auf CAIDs basierend: alle SC's mit der gleichen CAID werden zusammengefasst, Provider wird entfernt<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional}}<br />
Interval in Sekunden zur Verteilung der share list updates an die Clienten.<br />
<br />
0 = Update basiert auf Server-Updates, Werte kleiner als 10 sind ungültig und werden auf 30 gesetzt.<br />
= [blank) 240 (default)<br />
<br />
<br />
==== keepconnected ====<br />
{{Optional}}<br />
CCcam Keepalive-Modus:<br />
0 = Trenne Client, wenn die maximale Leerlaufzeit (idletime) erreicht ist<br />
1 = Halte die Verbindung (default)<br />
<br />
<br />
==== recv_timeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7672:10/09/2012</span><br />
<br />
recv_timeout = Millisekunden<br />
<br />
hier kann ein network-timeout beim Empfang von Daten gesetzt werden<br />
default = 2000<br />
<br />
<br />
==== forward_origin_card ====<br />
{{Optional}}<br />
forward_origin_card = 0|1<br />
<br />
Weiterleitung des ECM-Requests an den reader, der diese Karte hat.<br /><br />
Loadbalancer und Caching werden dabei deaktiviert.<br />
<br />
1 = Weiterleitung eingeschaltet<br />
0 = Aus (default)<br />
<br />
<br />
==== nodeid ====<br />
{{Optional}}<br />
nodeid = ID<br />
<br />
setzt CCcam node ID in '''hex''', <br />
<br />
default:none<br />
<br />
Beispiel:<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br />
Wenn eine nodeid benutzt wird, dann wechselt der Server das Protokol von "cccam ext" zu "cccam".<br />
<br />
<br />
=== '''Pandora''' ===<br />
{{OSCamConfPandoraParameter}}<br />
==== pand_skip_send_dw ====<br />
pand_skip_send_dw = dummy<br />
<br />
==== pand_allowed ====<br />
pand_allowed = dummy<br />
<br />
==== pand_usr ====<br />
pand_user = dummy<br />
<br />
==== pand_pass ====<br />
pand_pass = dummy<br />
<br />
==== pand_ecm ====<br />
pand_ecm = dummy<br />
<br />
==== pand_port ====<br />
pand_port = dummy<br />
<br />
==== pand_srvid ====<br />
pand_srvid = dummy<br />
<br />
<br />
=== '''GBox''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
{{OScamConfGboxParameter}}<br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBox läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
===== my_password =====<br />
{{Mandatory}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9163:12/31/2013</span><br />
'''moved from oscam.server'''<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
Passwort = 4 hex bytes, 8 chara<br />
<br />
Mein Passwort<br />
<br />
Beispiel<br />
98AF3E25<br />
<br />
<br />
==== proxy_card ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy_Card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
proxy reader SmartCard(s), die mit gbox network reshared werden, default = none<br />
<br />
<br />
==== ccc_reshare ====<br />
{{Optional}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = cccam Karten können ins gbox Netzwerk transportiert werden , default = 0 (global setting)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Caid der Karten müssen in 'ccc_gbx_caid =' spezifiziert werden<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Der Share Level für jeden peer wird spezifiziert in oscam.server [reader]-> cccam_reshare<br />
<br />
<br/><br />
<br />
==== ccc_gbx_caid ====<br />
{{Optional}}<br />
<br />
ccc_gbx_caid = caid_1,caid_2,...<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' 'ccc_reshare' muß zusätzlich gesetzt werden<br />
<br />
<br/><br />
<br />
==== hostname ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
hostname = eigene IP oder hostname<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
port = port[,port]... udp ports, die die gbox überwacht<br />
<br />
==== my_vers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9645:04/09/2014</span><br />
<br />
my_vers = version<br />
<br />
hier kann das low byte (hex) der eigenen gbox version gesetzt werden<br />
<br />
default = 2A<br />
<br />
==== my_cpu_api ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9712:05/11/2014</span><br />
<br />
my-cpu_api = byte<br />
<br />
Setze CPU und API Byte in hexadecimal<br />
default = 40<br />
<br />
<br />
==== gbox_reconnect ====<br />
{{Optional}}<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min=60, max=300<br />
<br />
==== gsms_disable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9714:05/11/2014</span><br />
<br />
gsms_disable = 0|1<br />
<br />
schaltet gbox short message service (GSMS) aus, <br />
default = 1<br />
<br />
==== tmp_dir ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/2014</span><br />
<br />
tmp_dir = path<br />
<br />
tempory directory für gbox<br />
<br />
default = /tmp/.oscam<br />
<br />
<br />
=== '''DVBapi''' ===<br />
{{Optional}}<br />
Abschnitt nur dann erforderlich, wenn OScam auch als Client zum entschlüsseln eingesetzt werden soll.<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional}}<br />
DVBapi zum lokalen Entschlüsseln verwenden<br />
<br />
Beispiel:<br />
enabled = 0 # (deaktiviert)<br />
enabled = 1 # (aktiviert)<br />
<br />
Default:<br />
enabled = 0<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
Hier wird der User festgelegt, dieser sollte in der oscam.user angelegt sein.<br />
<br />
Beispiel:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
<br />
==== au ====<br />
{{Optional}}<br />
Autoupdate für DVB API aktivieren/deaktivieren.<br />
Abhängig vom verwendeten User aus der oscam.user und dessen au Einstellungen.<br />
<br />
Beispiel:<br />
au = 0 # AU deaktiviert (default)<br />
au = 1 # AU aktiviert<br />
<br />
<br />
==== pmt_mode ====<br />
{{Optional}}<br />
Beispiel:<br />
pmt_mode = 0 # (verwendet camd.socket und PMT Datei)<br />
pmt_mode = 1 # (deaktiviert PMT Datei)<br />
pmt_mode = 2 # (deaktiviert camd.socket)<br />
pmt_mode = 3 # (liest PMT nur beim Start ein)<br />
pmt_mode = 4 # (do not use signal handler for monitoring /tmp)<br />
pmt_mode = 5 # (do not use signal handler for monitoring /tmp & disable camd.socket)<br />
<br />
Default:<br />
pmt_mode = 0<br />
<br />
<br />
==== request_mode ====<br />
{{Optional}}<br />
CAID request mode: <br />
<br />
Beispiel:<br />
request_mode = 0 # versuche alle möglichen CAIDs nacheinander (default) <br />
request_mode = 1 # versuche alle CAIDs simultan<br />
<br />
<br />
==== listen_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP IP port für SAT IP clients. Die Filterung muss auf der Client-Seite erfolgen!<br />
<br />
0 = disabled (default)<br />
<br />
<br />
==== boxtype ====<br />
{{Mandatory}}<br />
Verwendete Box auf der DVB API aktiviert wurde.<br />
<br />
Beispiel:<br />
boxtype = ufs910<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt||qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
Hinweis:<br />
pc steht für generic pc support (laufend supported bei VDR mit vdr-plugin-dvbapi)<br />
<br /><br />
<br />
==== cw_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
cw_delay = in Millisekunden<br />
<br />
Delay beim Schreiben des CW. default = [blank] kein Delay<br />
<br />
<br />
==== delayer ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6808:05/14/2012</span><br />
<br />
delayer = Millisekunden<br />
<br />
Minimum der Zeit, um CW zu schreiben. default: 0<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
<br />
Öffnet die demux-device nach jedem Kanalwechsel neu, default = 0<br />
<br />
<br />
==== decodeforever ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = versuche dauernd auf allen CAIDs zu decodieren<br />
0 = default<br />
<br />
<br />
==== ecminfo_type ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10722:06/13/2015</span><br />
<br /><br />
Definiert die Syntax der Ausgabe in die ecm.info . <br />
<br />
ecminfo_type = 0|1|2|3|4|5 <br />
<br />
Die möglichen Werte bedeuten:<br /><br />
0 - normale oscam syntax<br />
1 - normale oscam syntax, aber die ECMTime wird in Millisekunden anstatt Sekunden angezeigt<br />
2 - wicardd (*1)<br />
3 - mgcamd<br />
4 - cccam<br />
5 - camd3<br />
<br />
(*1)Beispiel:<br /><br />
system: Nagra<br /><br />
caid: 0x1830<br /><br />
pid: 0x1CCE<br /><br />
prov: 000000<br /><br />
cw0: FF A3 7F F1 B8 29 E7 C8<br /><br />
cw1: CB E1 A3 D3 EF FE EF C0<br /><br />
Signature OK<br /><br />
source: ServerXY (cs378x at server:12345)<br /><br />
418 msec -- Sun Jun 14 18:55:37 2015<br /><br />
<br /><br />
<br />
==== read_sdt ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10766:06/15/15</span><br />
<br />
Durch diese Option kann Oscam (mittels Dvbapi) automatisch Kanalname und Providername in die oscam.srvid bzw oscam.srvid2 sowie oscam.provid eintragen. Dazu muss man mindestens 30 Sekunden auf einem Kanal verweilen. Dabei werden allerdings nur noch nicht vorhandene Namen hinzugefügt, bereits vorhandene Einträge in den Dateien werden nicht verändert. So behält man die volle Kontrolle über den Inhalt der Dateien.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = ausgeschaltet (default)<br />
1 = eingeschaltet, aber FTA-Kanäle nicht verarbeiten<br />
2 = eingeschaltet, auch FTA-Kanäle verarbeiten<br />
<br />
==== write_sdt_prov ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10841:06/27/15</span><br />
<br />
Mit dieser Option kann man einstellen, ob die Providernamen zusätzlich in die oscam.srvid bzw oscam.srvid2 eingetragen werden sollen. Dies ist nicht unbedingt erforderlich, weil der Providername automatisch aus der oscam.provid ausgelesen wird. Für diese Option ist das Einschalten von read_sdt erforderlich.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = ausgeschaltet, Providernamen nicht in die oscam.srvid bzw oscam.srvid2 eintragen (default)<br />
1 = eingeschaltet, Providernamen eintragen<br />
<br />
=== '''Anticasc''' ===<br />
Abschnitt nur dann erforderlich, wenn Anticascading als Schutz vor unbefugtem Weiterreichen von Cardsharing angewendet werden soll.<br />
<br />
{{OSCamConfAnticascParameter}}<br />
<br />
<br />
==== enabled ====<br />
{{Mandatory}}<br />
Hiermit wird Anticascading eingeschaltet.<br />
enabled = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== numusers ====<br />
{{Optional}}<br />
Zahl der User, die je Account zugelassen sind.<br />
numusers = 1 # Es ist ein User je Account zugelassen<br />
= 0 # Anticascading ausgeschaltet (default)<br />
<br />
<br />
==== sampletime ====<br />
{{Optional}}<br />
Zeit in Minuten für das Sammeln der Anfragen<br />
sampletime = 5 # Zeitraum von 5 Minuten<br />
= # [blank] Default-Wert 2 Minuten<br />
<br />
<br />
==== samples ====<br />
{{Optional}}<br />
Zahl der Anfragen über dem Limit (mögliche Werte zwischen 2 und 10)<br />
samples = 7 # Limit bei 7 Anfragen<br />
= # [blank] Default-Wert 10 Anfragen<br />
<br />
<br />
==== penalty ====<br />
{{Optional}}<br />
Strafe für den Sünder<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
<br />
Die Strafe kann in der oscam.user überschrieben werden! <br />
<br />
'''Hinweis:''' Fake-CW`s schaden nicht nur demjenigen, dem sie schaden sollen, sondern allen anderen im Share, denn weder oscam noch cccam kann Fake-CW`s von realen CW`s unterscheiden. Wenn also ein Sharepartner von uns ein Fake-CW bekommt und der es dann für 7 Sekunden im cache hat, kann das durch cache2-Hits unbegrenzt an weitere Sharepartner gehen, auch trotz Einstellung von cccmaxhops = 0. Es haben dann unzählige User plötzlich für 7 Sekunden einen Freezer und keiner weiss, warum. Man schadet so also unbewusst allen Sharepartnern, auch denen, mit denen man nicht direkt shart!<br />
<br />
Beispiel<br />
penalty = 3 # Sende korrekte CWs zeitversetzt<br />
<br />
<br />
==== aclogfile ====<br />
{{Optional}}<br />
Dateiname für das AC-Log<br />
aclogfile =<br />
= # [blank] Kein Logfile (default)<br />
<br />
<br />
==== fakedelay ====<br />
{{Optional}}<br />
Fake-Verzögerung in Millisekunden (mögliche Werte zwischen 100 und 3000)<br />
<br />
Beispiel<br />
fakedelay = 500 # Verzögerung von 500 Millisekunden<br />
= # [blank] Default-Wert 1000 Millisekunden<br />
<br />
<br />
==== denysamples ====<br />
{{Optional}}<br />
Wieviel Samples sollen bestraft werden?<br />
<br />
Beispiel<br />
denysamples = 10 # Ab 10 Samples wird bestraft<br />
= # [blank] Default-Wert 8 Samples<br />
<br />
==== acosc_enabled ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
'''Vorbemerkung:'''<br />
mit den nachfolgenden acosc-Parametern wir ein Anticascading über das Zählen der SIDs ('''a'''nticascading '''o'''ver '''s'''id '''c'''ount) ermöglicht.<br />
<br />
acosc_enabled = 0|1<br />
1 = ermöglicht anticascading over SIDs count<br />
0 = default<br />
<br />
<br />
==== acosc_max_active_sids ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = Anzahl<br />
<br />
Maximum aktiver SIDs bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden!<br />
<br />
<br />
==== acosc_zap_limit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = Anzahl<br />
<br />
Zap-Limit bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
Strafe für den Sünder bei Anticascading over SIDs count:<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = Sekunden<br />
<br />
Dauer der Strafe bei Anticascading over SIDs count:<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
==== acosc_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_delay = Millisekunden<br />
<br />
Verzögerung bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.conf&diff=13525
OSCam/de/Config/oscam.conf
2020-02-24T17:13:45Z
<p>Felixka: /* ccc_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.conf''' ==<br />
Dies ist die Hauptkonfigurationsdatei für OSCam. Sie enhält globale Parameter z.B. für das Debuggen, Loggen und den Loadbalancer, sowie einzelne Sektionen für Sondereffekte wie z.B. den Monitor, das Web-Interface, die Protokolle, das DVBapi und das Anti-Cascading. Nur die Sektion [global] ist Pflichtbestandteil, alle übrigen Sektionen sind optional (also nur bei Bedarf) zu verwenden.<br />
<br />
<br />
=== '''Globale Parameter''' ===<br />
Folgende Parameter gibt es im [global] Abschnitt:<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Ist ein Parameter leer oder wird er nicht im Konfigurationsfile angeführt dann gelten die Default-Werte!<br />
<br />
<br />
==== nice ====<br />
{{Optional}}<br />
'''Systempriorität'''. OSCam benötigt fast keine CPU-Leistung. Wenn aber CPU-Leistung benötigt wird, sollte diese sofort zur Verfügung stehen. Werte von 20 bis -20 sind möglich, wobei 20 gering und -20 sehr hoch ist. Wird der Parameter auskommentiert(#), wird diese Funktion nicht ausgerufen. Das ist wichtig z.B. für die dbox 2[http://de.wikipedia.org/wiki/DBOX2], wenn die Fehlermeldung "''relocation error:setpriority''" erscheint. Vgl. [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Beispiel:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
<br />
===== pidfile =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8176/01/24/2013</span><br />
<br />
pidfile = filename, <br />
<br />
ändere den Namen für das pidfile und den Speicherort,<br />
mit [blank] none (default)erfolgt die Speicherung als oscam.pid in /tmp<br />
<br />
Beispiel:<br />
pidfile = /var/run/oscam.pid<br />
<br />
<br />
===== logfile =====<br />
{{Optional}}<br />
Mit diesem Parameter wird Name und Pfad und für das Logfile (mehrere sind nicht möglich) festgelegt, zusätzlich auch das Loggen in stdout oder syslog. Es ist auch möglich, das Loggen nur für stdout oder syslog festzulegen und somit keine Logdatei zu schreiben.<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
Möglichkeiten:<br />
logfile = /var/log/oscam.log # Datei oder Linuxdevice (z.B. /dev/tty)<br />
logfile = syslog # Die Ausgabe wird an den syslogd übergeben<br />
logfile = stdout # Bildschirmausgabe<br />
<br />
Beispiel:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format des logfile:<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timed out<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
<br />
===== ecmfmt =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8056:01/03/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
definiert ECM log format, default:c@p/i/s/l:h:Y:t <br />
<br />
mögliche Variablen: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and cccam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , diese ID wird durch die Tierbeschreibung aus der oscam.tiers (falls vorhanden) ersetzt<br />
w = CW<br />
y = Payload (kurz, 3 Bytes)<br />
Y = Payload (lang, 6 Bytes)<br />
<br />
benutze einen Wert als Prefix, um eine Variable mit diesem Wert zu verbergen<br />
<br />
Beispiel:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w <br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn10048:11/30/13/2013</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs werden eingefügt, wenn CWs nicht ein ungleiches oder gleiches Muster haben (default)<br />
1 = disabled<br />
<br />
<br />
===== loghistorysize =====<br />
{{Optional}}<br />
loghistorysize = bytes<br />
<br />
Größe der Log-Messages-History im WebIf oder Monitor in Bytes<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) # ist nur wirksam, wenn '''preferlocalcards = 1''' in der [global] section gesetzt ist, sonst unter stage 3!<br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
Beispiel:<br />
<br />
P/2/2/2 oder L/2/4/4<br />
<br />
<br />
===== maxlogsize =====<br />
{{Mandatory}}<br />
<br />
Hier kann die maximale Größe des Logfiles in KBytes festgelegt werde. Das ist besonders wichtig für Server mit nur geringem Speicherumfang (z.B. auf dbox2). Darum wird dringend empfohlen, bei solchen Servern diese Größe sorgfältig zu bestimmen. Nicht selten "platzt" ein System, weil die Logfiles unkontrolliert riesige Ausmaße angenommen haben!<br />
<br />
Beispiel<br />
maxlogsize = 20 # Logfile geht bis zu 20 KBytes<br />
= 0 # Logfile erhält '''unbegrenzte''' Größe<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile geht bis zu 10 KBytes (default)<br />
<br />
<br />
===== logduplicatelines =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8290/02/05/2013</span> <br />
<br />
logduplicatelines = 0|1<br />
<br />
= 1 schaltet das Schreiben von Duplikatzeilen im Logfile aus<br />
= 0 schaltet das Schreiben von Duplikatzeilen im Logfile ein = default<br />
<br />
<br />
===== disablelog =====<br />
{{Optional}}<br />
Schaltet Logfile<br />
1 = Ausschalter ein, also '''kein''' Log - puh ;-) -<br />
0 = Ausschalter aus, also '''ein''' Log<br />
<br />
Beispiel:<br />
disablelog = 1 # es wird '''kein''' Log erstellt<br />
<br />
Default:<br />
disablelog = 0 # es wird '''ein''' Log erstellt<br />
<br />
<br />
===== cwlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für CW-Logging eingestellt werden. Der Pfad ist relativ zum Workdirectory und muss existieren, sonst werden keine Logs erstellt und auch keine Fehler ausgegeben.<br />
<br />
CWs (control words) sind die Antworten der Karte mit der ein bestimmter Sender für einige Sekunden freigeschaltet wird bevor das nächste cw übertragen wird. Die cw Logdatei kann dazu verwendet werden, den Sender zeitversetzt zu entschlüsseln. Das wird auch "Offline Decoding" genannt. Siehe [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
OScam erstellt für jeden Sender und jeden Tag eine neue *.cwl Datei mit Datum, Service-ID und Sendername, z.B. 110808_I000B_Sky_Cinema_+1.cwl mit diesem Inhalt:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
Wenn mindestens ein User diesen Sender schaut, werden alle notwendigen CWs gespeichert.<br />
Bitte einen Speicherort mit genügend Platz angeben, da pro Tag und Sender einge 10KB an Daten anfallen. Empfehlenswert ist ein Skript, das die logfiles regelmässig verschiebt/löscht.<br />
<br />
Beispiel:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] kein Pfad für CW-Log, Logging abgeschaltet<br />
<br />
<br />
===== emmlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für EMM-Logging eingestellt werden. Welche EMMs mitgeloggt werden sollen, kann mit den "saveemm-*"-Parametern in der oscam.server detailliert eingestellt werden.<br />
<br />
Beispiel:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] Es wird der Config-Ordner verwendet<br />
<br />
<br />
===== usrfile =====<br />
{{Optional}}<br />
Festlegung des Namens eines Files für user logging.<br />
<br />
Das user logging file hat folgendes Format<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Beispiel:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
<br />
===== disableuserfile =====<br />
{{Optional}}<br />
Jetzt wird es ganz wild: Auch wenn ein Logfile eingeschaltet ist (siehe logfile) kann hier das userfile ausgeschaltet werden.<br />
<br />
Beispiel:<br />
disableuserfile = 1 # es wird '''kein''' userfile erzeugt<br />
= 0 # es wird '''ein''' userfile erzeugt<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
<br />
===== usrfileflag =====<br />
{{Optional}}<br />
Einstellung des Logging-Modus<br />
0 = Es wird nur das Ein- und Ausloggen des Clients im Userfile geloggt<br />
1 = Jedes Zappen eines Clients wird im Userfile geloggt<br />
Default-Wert ist 0<br />
<br />
Beispiel:<br />
usrfileflag = 1 # Alles wird geloggt<br />
<br />
Default:<br />
usrfileflag = 0 # Nur Login und Logout wird geloggt<br />
<br />
<br />
===== saveinithistory =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn7128;07/02/2012</span><br />
<br />
Sicherung der Reader-Init-History. Wird benötigt, um die Entitlements anzuzeigen.<br />
<br />
Beispiel:<br />
saveinithistory = 1 # Sicherung nach /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # Keine Sicherung<br />
<br />
<br />
===== disablemail =====<br />
{{Optional}}<br />
disablemail = 0|1<br />
<br />
Schaltet das Speichern von NDS Videoguard MailMessages des Providers aus. Default: 1 (disabled)<br />
<br />
<br />
===== mailfile =====<br />
{{Optional}}<br />
mailfile = file<br />
<br />
Legt das File fest, in dem NDS Videoguard MailMessages des Providers gespeichert werden sollen.<br />
<br />
Default: [blank] kein File.<br />
<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
Delay in Millisekunden für eine Anfrage an cache exchange mode 1 reader, default: kein delay<br />
<br />
<br />
==== reader ====<br />
===== enableled =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
<br />
===== serialreadertimeout =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8541:03/13/2013</span><br />
<br />
'''Nur wenn Serialreader benutzt wird'''<br />
Timeout in Millisekunden für Serialreader<br />
<br />
Beispiel:<br />
serialreadertimeout = 1200 # Timeout nach 1200 Millisekunden<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout nach 1500 Millisekunden<br />
<br />
<br />
===== waitforcards =====<br />
{{Optional}}<br />
Hier kann festgelegt werden, ob OSCam beim Start des Programms auf lokale Karten wartet, bevor die Netzwerkports geöffnet werden.<br />
<br />
Beispiel:<br />
waitforcards = 0 # Nicht Warten<br />
<br />
Default:<br />
waitforcards = 1 # Warten<br />
<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional}}<br />
waitforcards_extra_delay = Millisekunden<br />
<br />
Zusätzliche Verzögerung in Millisekunden nach Warten auf lokale SCs während des Starts vor dem Öffnen von Netzwerk-Ports<br />
<br />
default = 500<br />
<br />
<br />
===== preferlocalcards =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9605:03/29/2014</span><br />
<br />
Der Parameter legt fest, welche Quelle zuerst für die Dekodierung verwendet werden sollen.<br />
<br />
Beispiel:<br />
preferlocalcards = 0 # lokale Karten werden wie remote Reader behandelt<br />
<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
preferlocalcards = 2 # Lokale Karten werden dem CacheEX vorgezogen<br />
<br />
Default:<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
<br />
===== readerrestartseconds =====<br />
{{Optional}}<br />
Festlegung einer Wartezeit in Sekunden zwischen Restarts von Readern.<br />
<br />
Beispiel:<br />
readerrestartseconds = 10 # Wartezeit 10 Sekunden<br />
= 0 # '''keine Readerrestarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # Wartezeit 5 Sekunden<br />
<br />
<br />
===== block_same_ip =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_ip = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit derselben IP-Addresse zurück, default = 1<br />
0 = nicht zurückweisen<br />
<br />
<br />
===== block_same_name =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_name = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit demselben Namen zurück, default = 1<br />
0 = Nicht zurückweisen<br />
<br />
<br />
==== cache ====<br />
===== cachedelay =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
<br />
===== max_cache_time =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clienten-Anfrage im cache verbleiben. Die zeit muss 2 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
===== max_cache_count =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = Anzahl, default 1000<br />
<br />
Maximale Zahl von CWs im cache<br />
<br />
<br />
===== cacheexwaittime =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
Maximale Wartezeit für einen Cache-Zugriff in Millisekunden für cacheex = 1 Reader.<br />
50 Millisekunden = default<br />
<br />
<br />
===== cacheexenablestats =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== client ====<br />
===== clienttimeout =====<br />
{{Optional}}<br />
<br />
Maximale Zeit in Millisekunden, bevor ein Client ein Timeout erhält.<br />
<br />
Beispiele:<br />
clienttimeout = 10000 # nach 10 Sekunden erfolgt ein Timeout<br />
clienttimeout = 10 # hier erfolgt aber ein Timeout bereits nach 10 Millisekunden, s. Hinweis unten!<br />
clienttimeout = 8 # der Timeout erfolgt nach 8000 Millisekunden (= 8 Sekunden), s. Hinweis<br />
Default:<br />
clienttimeout = 5000 # nach 5000 ms (=5 Sekunden) erfolgt ein Timeout<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bei Werten < 10 (also 1 bis 9) werden diese mit Eintausend multipliziert, aus "5" wird also 5000 ms. Eine eingetragene "10" bleibt aber bei zehn Millisekunden!<br />
<br />
===== clientmaxidle =====<br />
{{Optional}}<br />
Begrenzt die Leerlaufzeit eines Clienten in '''Sekunden''' bevor er vom Traffic getrennt wird.<br />
<br />
Beispiel:<br />
clientmaxidle = 200 # Trennung nach 200 Sekunden<br />
= 0 # Begrenzung ist ausgeschaltet, keine Trennung vom Traffic beim Leerlauf!<br />
<br />
Default:<br />
clientmaxidle = 120 # Trennung nach 120 Sekunden<br />
<br />
<br />
===== suppresscmd08 =====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
suppresscmd08 = 0 # Mitteilung an Clienten mit den Protokollen camd 3.5x, 3.57x und 3.78x, keine neuen Anfragen wegen <br />
zurückgewiesener Kombination aus CAID, SID und Provider-ID zu schicken (default)<br />
= 1 # Anfragen sollen weiterhin geschickt werden<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
<br />
==== fallbacktimeout ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Bei mehreren Readern (Siehe Abschnitt [reader] in oscam.server) kann ein Reader bestimmt werden, auf den z.B. bei einer Störung der übrigen Reader der traffic zurück fällt.<br />
<br />
Maximale Wartezeit des [[Cardserver]]s in Millisekunden auf primäre [[Reader]], bevor der/die [[Fallback]]-Reader (falls vorhanden!) befragt werden.<br />
<br />
Beispiel:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Der Wert muss größer dem Wert von "serialreadertimeout" gewählt werden, ansonsten werden die Standardwerte verwendet.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = Millisekunden<br />
<br />
Wartezeit in Millisekunden, bevor der für eine CAID reservierte [[Reader]] befragt wird.<br />
<br />
Default = 2500<br />
<br />
<br />
==== sleep ====<br />
{{Optional}}<br />
Alle User nach "n" Minuten "inaktivieren", wenn diese den Sender nicht innerhalb der eingestellten Zeit wechseln. Diese Einstellung kann auch für jeden User separat vorgenommen werden: [[OSCam/de/Config/oscam.user#sleep]]<br />
<br />
Beispiel:<br />
sleep = 240 # inaktiv nach 4 Stunden<br />
<br />
Default:<br />
sleep = # [blank]<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam hört auf ALLE IP Adressen.<br />
<br />
<br />
==== bindwait ====<br />
{{Optional}}<br />
Maximale Zeit in Sekunden, die der [[Cardreader]] beim Start wartet, bis er den jeweiligen Netzwerk-Port in Zugriff bekommt. Falls der OSCam innerhalb dieser Zeit den Port nicht binden kann, terminiert er mit "Bind Request failed". Ursachen dafür sind<br />
* Doppelbelegung von Ports<br />
* Ein vormals abgestürzter OSCam der die Ports nicht wieder freigegeben hat<br />
* OSCam wurde mehrmals gleichzeitig gestartet<br />
<br />
Beispiel:<br />
bindwait = 20 # Wartezeit 20 Sekunden<br />
<br />
Default:<br />
bindwait = 120 # Wartezeit 120 Sekunden<br />
<br />
<br />
==== netprio ====<br />
{{Optional}}<br />
Hier kann die Priorität des Cardservers im Netzwerk festgelegt werden<br />
<br />
Beispiel:<br />
netprio = 1 # Prioritätsstufe 1<br />
<br />
Default:<br />
netprio = 0 # Systembedingte Priorität<br />
<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional}}<br />
Art der DNS-Auflösung. Dies sind zwei verschiedene libc-Aufrufe für die Namensauflösung, weil einige ältere Systeme Probleme mit der moderneren Implementierung ''getadressinfo'' haben bzw. diese Funktion aus ihren Images gestrippt wurden (zB die alte dBox2). Außerdem ist ''getadressinfo'' threadsafe, während ''gethostbyname'' es nicht ist und deshalb locks drumherum im Code benötigt. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Beispiel:<br />
resolvegethostbyname = 1 # Name wird mittels ''gethostbyname'' aufgelöst<br />
<br />
Default:<br />
resolvegethostbyname = 0 # ''getadressinfo'' wird benutzt<br />
<br />
<br />
====failbancount====<br />
{{Optional}}<br />
Failbancount = Anzahl der erlaubten Fehlversuche mit falschen Zugangsdaten. <br />
= 0 (default) IP wird sofort beim ersten Versuch mit unbekannten Zugangsdaten gesperrt!<br />
<br />
Wenn innerhalb '''failbantime''' mehr als in '''failbancount''' erlaubte Versuche registriert wurden, wird die IP für die restliche failbantime gesperrt. Nach Ablauf von failbantime stehen wieder volle failbancount zur Verfügung. Failbancount ist also eine Lockerung der Regeln<br />
<br />
<br />
==== failbantime ====<br />
{{Optional}}<br />
Zeitspanne in Minuten, für die ein Client mit ungültigem Login-Versuch auf IP-Basis geblockt wird.<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP Adresse wird für 5 Minuten geblockt. Neue Loginversuche werden ignoriert auch wenn das Login OK wäre.<br />
# Es wird kein Clientthread erstellt.<br />
<br />
Default:<br />
failbantime = 0 # failban ist ausgeschaltet (default)<br />
<br />
<br />
==== dropdups ====<br />
{{Optional}}<br />
Möglichkeiten zur Duplizierung von Client-Verbindungen. Es wird damit die Reaktion auf den [[OSCam/de/Config/oscam.user#uniq|uniq]]-Parameter festgelegt.<br />
<br />
0 = Markierung des Clienten als Duplikat aber keine Trennung (default)<br />
1 = Abbrechen der Duplikat-Verbindung anstelle einer Markierung als Duplikat<br />
<br />
<br />
==== unlockparental ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7289:08/27/2012</span><br />
<br />
'''Nur Seca und Viaccess'''<br />
<br />
Option zum Ausschalten der Jugendschutzfunktion für Seca und Viaccess Pin Code Anfragen bei adult movies.<br />
Bei Viaccess z.B. für die Redlight Elite HD Smartcard. Mit unlockparental = 0 bleibt Dorcel Dunkel mit 1 wirds hell!<br />
<br />
Beispiel:<br />
unlockparental = 1 # Jugendschutzfunktion ausgeschaltet<br />
<br />
Default:<br />
unlockparental = 0 # Jugendschutzfunktion von Seca und Viaccess eingeschaltet<br />
<br />
<br />
==== double_check ====<br />
{{Optional}}<br />
'''Nur wenn CW double check ausgewählt ist!'''<br />
<br />
ECM wird zu 2 oder mehr Readern mit der selben SC gesandt und die CW's werden gegeneinander verifiziert. lb_nbes_reader muss auf 2 oder höher gesetzt werden.<br />
<br />
Beispiel:<br />
double_check =<br />
<br />
Default:<br />
double_check = 0<br />
<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|erste 2 digits von CAID1],[CAID2|erste 2 digits von CAID2],... = [blank] keine [default]<br />
<br />
ECM wird an 2 oder mehr Reader mit der gleichen SC gesendet und die CW's werden gegen andere definierte CAIDs oder die ersten 2 bytes der CAIDs verifiziert. lb_nbest_readers muss auf 2 oder höher gesetzt sein!<br />
<br />
<br />
==== Loadbalancer ====<br />
===== lb_mode =====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Wenn hier loadbalancing aktiviert wird, dann sind die in oscam.server bei services stehenden Besonderheiten zu beachten. Siehe [[streamboard:wiki/OSCam/de/Config/oscam.server#services|Services]]!<br />
<br />
Loadbalance Mode<br />
<br />
Wenn man zwei oder mehrere gleiche Karten hat (egal ob lokal oder als Proxie), kann man die Last auf diese Karten gleichmäßig verteilen (balancieren).<br />
<br />
Beispiel:<br />
lb_mode = 0 (deaktiviert) (default)<br />
lb_mode = 1 (schnellster Reader zuerst)<br />
lb_mode = 2 (Reader der am längsten nicht geantwortet hat wird genommen)<br />
lb_mode = 3 (Reader mit der geringsten Auslastung wird verwendet)<br />
lb_mode = 10(LB ist ausgeschaltet, Senderstatistik wird trotzdem erstellt)<br />
<br />
Default:<br />
lb_mode = 0 # deaktiviert<br />
<br />
<br />
===== lb_save =====<br />
{{Optional}}<br />
Speichert die Loadbalance Statistik, damit sie auch nach einem Neustart erhalten bleibt.<br />
Um die CPU nicht zu sehr zu belasten, sollte hier ein Wert > 100 eingetragen werden.<br />
<br />
Beispiel:<br />
lb_save = 100 # Anzahl der ECM's nach der die Statistik gespeichert wird<br />
<br />
Default:<br />
lb_save = 0 # Statistik wird nicht gespeichert<br />
<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional}}<br />
Anzahl der Reader, die für die ECM anfragen.<br />
<br />
Beispiel:<br />
lb_nbest_readers = 2 # Anfragen gehen immer an zwei Reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # Anfrage geht nur an einen Reader<br />
<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional}}<br />
Anzahl der Fallback Reader für den Lastenausgleich.<br />
<br />
Beispiel:<br />
lb_nfb_readers = 2 # Zwei Fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1<br />
<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mod<br />
= 0 # Standardverfahren zum (späten) Wiederöffnen blockierender Reader (default)<br />
= 1 # Schnelles Wiederöffnen blockierender Reader<br />
<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5893:08/19/2011</span><br />
<br />
Anzahl der Reader je CAIDs für das Loadbalancing, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Default:<br />
lb_nbest_percaid = 0<br />
<br />
Beispiel:<br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wird so lange blockiert, bis die Statistik aufgeräumt ist<br />
1 = default<br />
<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = öffne alle gestoppten Reader sofort, wenn kein funktionierender Reader gefunden wird<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional}}<br />
Mindestanzahl der ECM's, die für die Auswertung genommen werden.<br />
<br />
Beispiel:<br />
lb_min_ecmcount =<br />
<br />
Default:<br />
lb_min_ecmcount = 5<br />
<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional}}<br />
Maximale Anzahl der ECM's, bevor der Loadbalancer zurückgesetzt wird.<br />
<br />
Beispiel:<br />
lb_max_ecmcount =<br />
<br />
Default:<br />
lb_max_ecmcount = 500<br />
<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional}}<br />
Zeitspanne in Sekunden zwischen neuem Verbindungsversuch zu verlorengegangenen readern/CAIDs/providers/services<br />
<br />
Beispiel:<br />
lb_reopen_seconds = 500 # Nach 500 Sekunden neuer Verbindungsversuch<br />
<br />
Default:<br />
lb_reopen_seconds = 900<br />
<br />
<br />
===== lb_retrylimit =====<br />
{{Optional}}<br />
Verbindungsversuch zum nächsten reader '''nur wenn''' die Antwortzeit höher, als hier festgelegt in '''Millisekunden'''.<br />
<br />
Beispiel:<br />
lb_retrylimit = 500 # Verbindungsversuch zum nächsten reader nur, wenn die Antwortzeit höher als 500 ms ist.<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
<br />
===== lb_savepath ===== <br />
{{Optional}}<br />
Dateiname für die Sicherung der Loadbalancing Statistiken<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional}}<br />
Zeit in Stunden, nach der die Statistiksätze gelöscht werden sollen<br />
<br />
default = 336<br />
<br />
<br />
===== lb_use_locking =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6166:12/28/2011</span><br />
<br />
Unterdrückt parallele und identische ECM-Anfragen<br />
<br />
1 = ein<br />
0 = aus # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* Man sollte diese Option nur anschalten wenn:<br />
** Langsames system<br />
** Hohe Last<br />
**Gleiche ECM Anfragen nicht aus dem Cache kommen, sondern weiter Reader angefragt werden<br />
<br />
* Vorteile aktiviert:<br />
** Durch die Synchronisierung wird ein ECM Request nach dem anderen durchgeführt, die Ermittlung von Cache oder Request und Zuordnung der Reader über den Loadbalancer ist immer erfolgreich<br />
<br />
* Nachteile aktiviert:<br />
** Die Synchronisierung verhindert Multithreading und es kommt eventuell zu höheren Antwortzeiten<br />
<br />
* Vorteile NICHT aktiviert:<br />
** Schnellere Durchlaufzeiten für ECM requests<br />
<br />
* Nachteile NICHT aktiviert:<br />
** Eventuell doppelte (bzw n-fache) ECM requests an die Reader möglich<br />
<br/><br />
<br />
<br />
===== lb_retrylimits =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,CAID2:time2]...<br />
<br />
Begrenzung der Zeit für einen retry des loadbalancing eines CAID in Millisekunden, wildcard CAIDs mit two-digit CAIDs möglich, <br />
<br />
default: [blank]<br />
<br />
Beispiel:<br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
Ignoriere die Providerinformations-CAIDs, um die statistischen Daten zu reduzieren, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Beispiel:<br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx und 34xx)<br />
<br />
default = [blank]<br />
<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # ermöglicht ein automatisches timeout auf der Basis von Statistiken des Loadbalancers<br />
= 0 # default<br />
<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = Prozent<br />
<br />
Prozentwert, mit dem die Timeout-Zeit beaufschlagt wird<br />
default = 30<br />
<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = Millisekunden<br />
<br />
Minimale Zeit in Millisekunden, die zur Timeout-Zeit hinzuaddiert wird<br />
default = 300<br />
<br />
<br />
===== lb_max_readers =====<br />
{{Optional}}<br />
lb_max_readers = limit (Zahl)<br />
<br />
beschränkt die Zahl der Reader während der Lernphase des Loadbalancing<br />
<br />
0 = unbegrenzt (default)<br />
x = beschränkt auf ein Limit von x (Zahl)<br />
<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional}}<br />
lb_auto_betatunnel = 0|1<br />
<br />
Ermöglicht automatisches Betatunneling für Betacrypt (CAIDs 1801, 1833, 1834 und 1835), wenn Loadbalancing verwendet wird<br />
lb_auto_betatunnel = 0 # ausgeschaltet<br />
= 1 # eingeschaltet (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Eintragungen für Betatunnel in oscam.user werden bevorzugt. Siehe [[streamboard:wiki/index.php/OSCam/de/Config/oscam.user#betatunnel|Betatunnel]]<br />
<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
setzt den Mode für das automatische Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only)<br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = Auswahl (Zahl)<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = immer Betacrypt<br />
105 = wählt einen Mittelwert<br />
200 = immer Nagravision<br />
<br />
<br />
=== '''Monitor''' ===<br />
Hier sind nur dann Eintragungen erforderlich, wenn ein Monitor benutzt wird!<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
UDP-Port für den Monitor<br />
port = 0 # Kein Monitor<br />
= # [blank] Portnummer Monitor ausgewählt<br />
<br />
Beispiel:<br />
port = 24480 # Monitor eingeschaltet mit Port 24480<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Service mit einer bestimmten IP-Adresse verbinden<br />
serverip = # IP-Adresse<br />
= # [blank] alle IP's (default)<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Unverschlüsselte Monitorverbindungen.<br />
<br />
Möglich<br />
* eine oder mehrere IP-Einzeladressen<br />
* eine oder mehrere IP-Bereiche<br />
* eine Mischung von IP-Einzeladressen oder IP-Bereichen<br />
<br />
Beispiel<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 und IP-Bereich 192.168.0.0 bis 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] keine unverschlüsselte Monitorverbindung.<br />
<br />
<br />
==== aulow ====<br />
{{Optional}}<br />
Zeitraum in Minuten, in dem keine EMM erscheinen, so dass der Client von "active" auf "on" gesetzt wird.<br />
<br />
Beispiel<br />
aulow = 30 # Nach 30 Minuten ohne EMM wird der Status von "active" auf "on" gesetzt (default).<br />
<br />
<br />
==== monlevel ====<br />
{{Optional}}<br />
Monitor-Level<br />
0 = Kein Zugriff auf Monitor (default)<br />
1 = Nur Server und eigene Prozeduren<br />
2 = Alle Prozeduren, aber nur ansehen<br />
3 = Alle Prozeduren, reload von oscam.user möglich<br />
4 = Unbeschränkter Zugriff<br />
<br />
Beispiel<br />
monlevel = 4 # Kompletter Zugriff<br />
<br />
Monlevel kann durch Eintragungen in oscam.user überschrieben werden!<br />
<br />
<br />
==== hideclient_to ====<br />
{{Optional}}<br />
Zeitspanne in Sekunden für das Ausblenden von Clients, die keine Anfragen senden. Siehe auch Parameter '''httphideidleclienst''' in Abschnitt [webif].<br />
hideclient_to = 40 # Clienten werden nach 40 Sekunden ohne Anfrage ausgeblendet<br />
= 0 # Keine Ausblendung von Clienten im Leerlauf<br />
<br />
<br />
==== appendchaninfo ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8546:03/13/2013</span><br />
<br />
Fügt die Channel-Info aus der oscam.services der Log-Meldung hinzu. Bei Verwendung von Monitor und Webinterface ist dies eine sehr nützliche Routine!<br />
appendchaninfo = 1 # Die Channel-Info wird hinzugefügt<br />
= 0 # Keine Channel-Info (default)<br />
<br />
<br />
=== '''lcd''' ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
<br />
==== lcd_outputpath ====<br />
{{Optional}}<br />
Hier kann ein Pfad für den LCD-Output eingestellt werden<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
<br />
==== lcd_hideidle ====<br />
{{Optional}}<br />
Verbergen eines Readers im LCD-Output während des Leerlaufs<br />
<br />
lcd_hideidle = 1 # Verbergen, wenn der Leerlauf länger als 20 Sekunden dauert<br />
= 0 # default<br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional}}<br />
LCD-Refresh-Interval in Sekunden (Minimum 5 Sekunden)<br />
<br />
Default:<br />
lcd-writeinterval = [blank] 10 Sekunden<br />
<br />
<br />
=== '''WebIf''' ===<br />
Eintragungen sind nur dann erforderlich, wenn das Web-Interface (by Alno) als Modul ausgewählt wurde.<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
<br />
==== Dateiformat zum Senden von EMMs via Webinterface ====<br />
(von Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' <br />
<br />
* Die Datei muß im TXT Format sein.<br />
* Jedes PRE-CAM EMM muss in einer eigenen Zeile vorliegen.<br />
* Die EMMs müssen im HEX Format vorliegen.<br />
** Beispiel: AABBCCDD...<br />
* Leerzeichen und Tabs zwischen den bytes sind erlaubt:<br />
** AA BB CC DD...<br />
* Groß- und/oder Kleinschreibung oder gemischte Schreibweise für jeden HEX-Wert sind erlaubt:<br />
** AA aa Aa aA...<br />
* Andere Zeichen oder Kommentare sind nicht erlaubt.<br />
<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
Port, auf dem das Webinterface hört.<br />
Standard ist Port 8888 wenn kein eintrag erfolgt<br />
<br />
httpport = 83 # Webinterface hört auf '''http-port 83'''<br />
= +83 # Webinterface hört auf '''https-port 83''' (SSL)<br />
0 # Webinterface ist ausgeschaltet<br />
<br />
<br />
==== httpcert ====<br />
{{Optional}}<br />
Datei für das SSL-Zertifikat<br />
httpcert = oscam.cert # (siehe dort!)<br />
= # [blank] es wird die Datei oscam.pem (embedded) verwendet<br />
<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
Beispiel<br />
httpforcesslv3 = 0 (default)<br />
= 1 benutze SSLv3<br />
<br />
<br />
==== httpuser ====<br />
{{Mandatory}}<br />
Name des Users für den Zugriffsschutz. Es wird zwar [blank] als Default-Wert angeboten. Davon wird aber dringend abgeraten; daher wird dieser Parameter hier als '''zwingend''' beschrieben.<br />
httpuser = # xyxyxy<br />
<br />
<br />
==== httppwd ====<br />
{{Mandatory}}<br />
Passwort für den Zugriffsschutz. Es gilt das gleiche wie für httpuser.<br />
httppwd = # 123456<br />
<br />
'''Die Parameter ''user'' und ''pwd'' werden beim Verbindungsaufbau zum Webinterface in einem Kontrollfenster abgefragt. Fehlen sie oder sind sie fehlerhaft, erfolgt die Meldung ''Forbidden'' und der Verbindungsaufbau wird abgebrochen!'''<br />
<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6825:05/15/2012</span><br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Füge den content des embedded CSS '''nicht vor''' dem content des user-css ein (default)<br />
1 # Embedded CSS wird '''vor''' dem externen CSS hinzugefügt(siehe nächsten Parameter: [[#httpcss|httpcss]])<br />
<br />
Dieser Parameter kann dazu benutzt werden, den embedded CSS mit custom styles zu überschreiben. Die laufenden CSS styles können hier angeschaut werden: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
<br />
==== httpcss ====<br />
{{Optional}}<br />
Für das Webinterface stehen verschiedene Styles in unterschiedlicher farblicher und graphischer Darstellung zur Verfügung. Der User kann die für ihn interessanten Style-Dateien (.css) speichern und je nach "Stimmung" verwenden. Hier wird der Pfad zu den Style-Dateien festgelegt.<br />
<br />
Beispiel<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] es wird der embedded Style verwendet (default)<br />
<br />
Styles werden hier veröffentlicht: [[streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
<br />
==== httptpl ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7083:06/25/12</span><br />
<br />
Pfad für externe templates und picons<br />
httptpl =<br />
= # [blank] Keine externen Templates<br />
<br />
Multiple simultane templates und picons können durch die Anlage von Unterordnern (mit max. 32 alphanumerischen Zeichen) zur Verfügung gestellt werden. Der Name des Unterordners korrespondiert mit dem Unterordner in der URL, default : [blank]<br />
<br />
Beispiele<br />
<br />
httptpl = /this/is/my/path <br />
<br />
Ordner mit multiplen templates: <br />
/this/is/my/path/template1 <br />
/this/is/my/path/template2 <br />
<br />
gültige URLs: <br />
http://host:port/template1 <br />
http://host:port/template2 <br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httpoverwritebakfile ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = überschreibe backup configurations files (*.bak)<br />
0 = default<br />
<br />
<br />
==== httplocale ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
hier kann ein "locale environment" gesetzt werden.<br />
<br />
default = [blank] kein environment<br />
<br />
Siehe auch hier:<br />
<br />
http://de.wikipedia.org/wiki/locale<br />
<br />
<br />
==== httpjscript ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
Path für oscam.js javascript, default : [blank]<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional}}<br />
Aktualisierungszeit in Sekunden, in der die (kompletten) Seiten des Webinterfaces aktualisiert werden<br />
httprefresh = 7 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httppollrefresh ====<br />
{{Optional}}<br />
<br />
Initialisierungszeit des Pollings und Aktualisierungszeit, in der diverse Daten des Webinterfaces neugeladen werden (Zeit kann auf den entsprechenden Seiten geändert werden)<br />
httppollrefresh = 60 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httpshowpicons ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # zeige picons in userlist<br />
0 # default<br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httphideidleclients ====<br />
{{Optional}}<br />
Dieser Parameter ermöglicht es, einen Clienten nach Ablauf der im Parameter '''hideclient_to''' im Abschnitt [monitor] festgelegten Leerlauf-Zeitspanne (siehe dort!) auszublenden.<br />
httphideidleclients = 1 # Ausblenden<br />
= 0 # Nicht ausblenden (default)<br />
<br />
==== httphidetype ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
Buchstabe der definiert, welcher type in der type-column auf der Statusseite des Webinterfaces versteckt werden soll. <br />
s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
<br />
==== httpscript ====<br />
{{Optional}}<br />
Pfad für Skripte, die vom Webinterface aus gestartet werden können<br />
httpscript = # Pfad<br />
= # [blank] kein Pfad<br />
<br />
<br />
==== httpallowed ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8842:08/17/2013</span><br />
<br />
Hier werden IP-Addressen, IP-Bereiche oder beides festgelegt, die auf das Webinterface zugreifen dürfen. Es wird zwar auch ein [blank] als Default-Wert angeboten, dessen Sinn sich aber nicht erschließt! Wenn das Webinterface benutzt werden soll, dann muss es auch die Möglichkeit geben, sich mit ihm zu verbinden. Daher wird dieser Parameter als '''zwingend''' dargestellt.<br />
<br />
Wenn ein localhost nach '''IPv6''' aufgelöst werden soll, muss die Zeile mit '''::1''' abgeschlossen werden!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
Beispiel<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen <br />
und werden nach IPv6 aufgelöst<br />
'''Default Werte'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255,::1<br />
<br />
<br />
==== httpdyndns ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6558:03/21/12</span><br />
<br />
Zulassen von DYNDNS-Verbindungen durch das Webinterface.<br />
<br />
httpdyndns = hostname[,hostname][,hostname]<br />
<br />
Beispiel<br />
httpdyndns = host1.exemple.com, host2.exemple.com<br />
<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional}}<br />
Sicherung der Konfigurationsdateien<br />
httpsavefullcfg = 0 # alle nicht leeren Parameter,<br />
# alle nicht Default-Parameter,<br />
# alle Parameter, die nicht den gleichen Inhalt enthalten wie dieselben Parameter in [global] (default).<br />
1 # alle Parameter<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional}}<br />
<br />
Über das Webinterface können in bestimmtem Unfang Konfigurations-Dateien editiert und gesichert werden. Das ist für den Server-Admin, der sich nicht immer in der Nähe zur Konsole des Servers befindet, sehr vorteilhaft. Wenn aber weitere User oder andere Beteiligte ebenfalls Zugang zum Webinterface und damit Zugriff auf die Daten haben, kann das zu einem Problem werden. Die Möglichkeit des Editierens (Schreibens) kann daher mit diesem Parameter ausgeschaltet werden.<br />
httpreadonly = 1 # nur Lesezugriff möglich<br />
= 0 # alles ist möglich (default)<br />
<br />
<br />
==== httpiconpath ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9463/01/28/2014</span><br />
<br />
httpiconpath = path<br />
<br />
Pfad zur Picon-Datei, default [blank] none<br />
<br />
<br />
==== httphelplang ====<br />
{{Mandatory}}<br />
httphelplang = de|en|fr|it<br />
<br />
Auswahl der Sprache für die Kontexte<br />
<br />
de = deutsch<br />
en = englisch<br />
fr = französisch<br />
it = italienisch<br />
[blank] = englisch (default)<br />
<br />
<br />
==== httposcamlabel ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
Setzt ein individuelles label für den header des Webinterfaces, default: OSCam rXXXX<br />
<br />
<br />
=== '''Cache''' ===<br />
{{OSCamConfCacheParameter}}<br />
<br />
<br />
==== delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
<br />
==== max_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
max_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clientanfrage im Cache verbleiben. Die Zeit muß 3,5 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
==== max_hit_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8910:09/10/2013</span><br />
<br />
max_hit_time = in Sekunden<br />
<br />
Maximale Zeit, die Treffer für cache exchange im cache verbleiben müssen um wait_time zu evaluieren, default: 15<br />
<br />
<br />
==== wait_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Wartezeit und Dynamische Wartezeit in Millisekunden für cache exchange und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
<br />
= [blank] none (default)<br />
<br />
'''Info:'''<br />
awtime --> Zeit die bei jeder Anfrage gewartet wird (always wait time)<br />
dwtime --> Zeit die bei positivem Fund eines CWs im Cache gewartet wird (dynamic wait time)<br />
<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
<br />
Verwendungspraxis:<br />
wait_time = 098C:5:130,09C4:5:130,1702:5:1900,1830:5:490,1843:5:490,0D05:5,0B00:5<br />
<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional}}<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode (bestimmt die Verwenung des Parameters ''counter'')<br />
<br />
0 = Falls ''wait_time'' abgelaufen ist, sende das CW mit dem höchsten counter an die clients<br />
1 = Niemals ein CW (von cacheex) aus dem cache versenden, wenn der counter aus dem cacheex den in diesem Parameter <br />
gesetzten counter nicht erreicht. Falls ''wait_time'' erreicht ist, geht der request an normale reader. <br />
Nur wenn ein CW den gesetzten counter erreicht, wird es an die clients gesendet.<br />
Default = 0<br />
<br />
<br />
* counter (bestimmt den counter des CW, der mindestens erreicht werden muss, um versendet zu werden)<br />
<br />
Default = 1 (benutze das CW mit dem höchsten counter aus dem cache)<br />
<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = erlaube bad cw's von einem festgelegten fallback reader. Default = 0<br />
<br />
<br />
'''Info:'''<br />
<br />
Bei '''aktiviertem''' Parameter wird bei einem bad CW die Anfrage an den fixed Fallback weitergeleitet<br />
und somit ein freetzer meist verhindert.<br />
<br />
<br />
Siehe --> [[OSCam/de/Config/oscam.server#fallback|fallback]]<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== csp_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von CSP-Nodes hört<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Lokale Bind-IP für csp_port (siehe oben)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 ausgeschaltet (default)<br />
= 1 eingeschaltet<br />
<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Für NDS Karten nur in einer light Version verfügbar''' <br />
<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID, für die der CW-Cycle-Check ermöglicht werden soll, [blank] = kein Check (Default)<br />
<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = Zahl<br />
<br />
Maximum von CW-Cycle-Entries in die Liste, default = 500, maximum = 4000<br />
<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = Minuten<br />
<br />
Minimalzeit, die ein erkannter Cycle in der Memory verbleiben soll, default = 15, maximum = 240<br />
<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = ungültige CW-Cycle kommen nur ins Log <br />
1 = ungültige CW-Cycle werden gedropped (default)<br />
<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, 1 = alte CW-Cycle werden gedropped, 0 = kein Dropping (default)<br />
<br />
<br />
==== cwcycle_sensitive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (oder mehr) gleiche bytes und drop neues CW<br />
3 = 3 (oder mehr) gleiche bytes und drop neues CW<br />
4 = 4 (oder mehr) gleiche bytes und drop neues CW<br />
<br />
--> Höherer Wert entspricht höherer Empfindlichkeit<br />
<br />
<br />
==== cwcycle_usecwcfromce ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = benutze CW Info aus cache exchange<br />
0 = default<br />
<br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
antworte, wenn das cache exchange timeout erreicht ist und keine normalen Reader zur Verfügung stehen, die ECM's senden:<br />
<br />
0 = sende sofort '''not found''' an den client (default)<br />
1 = warte auf eine Antwort für cache exchange bis der timeout für den client erreicht ist<br />
<br />
<br />
=== '''csp (UDP''') ===<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:02/16/2013 Siehe Section '''[cache]'''!</span><br />
<br />
Abschnitt nur dann erforderlich, wenn csp als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von csp-nodes hört<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
Local Bind IP für den oben genannten UDP-Port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== wait_time ====<br />
{{Mandatory}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET Siehe Section '''[cache]'''!</span><br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8060:01/04/13</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8077:01/06/13</span><br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
= [blank] none (default)<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
Wartezeit in Millisekunden für cache exchange ('''nur mode 2&3''') und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
=== '''Camd 33 (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn camd33 als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd 33 Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein Adressbereich, der unverschlüsselt übertragen wird.<br />
<br />
Beispiel:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt =<br />
<br />
<br />
==== passive ====<br />
{{Optional}}<br />
Definition für aktiven oder passiven Client. Generell geht das Camd3.3x-Protokoll von einem aktiven Client aus. Es kann aber unter bestimmten Umständen bei manchen Clients (meistens plugin) zur Schwierigkeiten kommen. In diesem Fall<br />
<br />
Beispiel:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
<br />
==== key ====<br />
{{Optional}}<br />
<br />
Schlüssel, der für die Verschlüsselung verwendet wird. (128bit Verschlüsselung)<br />
<br />
Beispiel:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key =<br />
<br />
<br />
=== '''cs357x (UDP)''' ===<br />
Abschnitt nur dann erforderlich, wenn cs357x als Client Protokoll verwendet wird.<br />
Dieses Protokoll verschlüsselt grundsätzlich und bildet den Schlüssel aus dem Benutzernamen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:'''<br />
'''cs357x''' wurde auch als '''camd35''' bezeichnet. Beide Bezeichnungen meinen das gleiche Protokoll mit den gleichen Funktionsweisen und Parametern. Künftig wird zur Vermeidung von Irritationen '''nur noch cs357x''' verwendet.<br />
<br />
Eine genauere Erklärung für UDP findet Ihr hier [http://de.wikipedia.org/wiki/User_Datagram_Protocol]<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus cs357x Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs357x -clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Tread]]<br />
<br />
<br />
=== '''cs378x''' (TCP) ===<br />
Abschnitt nur dann erforderlich, wenn cs378x als Client Protokoll notwendig ist.<br />
<br />
Eine ausführliche Erklärung von TCP findet Ihr hier [http://de.wikipedia.org/wiki/Transmission_Control_Protocol]<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein das OSCam nur antwortet wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs3.78x-clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
<br />
=== '''Newcamd (TCP)''' ===<br />
Abschnitt nur dann erforgerlich, wenn newcamd als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
<br />
==== key ====<br />
{{Mandatory}}<br />
Schlüssel für die Newcamd Verbindung zum Client.<br />
<br />
Beispiel:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Newcamd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000@1234:000000 # (CAID 1234 ist über Port 15000 erreichbar)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 ist über Port 15000 erreichbar CAID 5678 über Port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Hat der Server mehrere IP Adressen werden nur Anfragen die an die konfigurierte IP gehen beantwortet.<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein bestimmter IP Bereich der sich auf den Newcamd Server verbinden darf.<br />
<br />
Beispiel:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed =<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
Der Server versucht, die Newcamd Verbindung am leben zu halten.<br />
<br />
Beispiel:<br />
keepalive = 1 # (aktiviert)<br />
keepalive = 0 # (deaktiviert)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
<br />
==== mgclient ====<br />
{{Optional}}<br />
Aktiviert das Extendet Newcamd Protokol, um mehrer CAID's über einen Port zu schicken<br />
<br />
Beispiel:<br />
mgclient = 1 # (aktiviert)<br />
mgclient = 0 # (deaktiviert)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br />
=== '''scam''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9878:09/29/2014</span><br />
<br />
Abschnitt nur dann erforderlich, wenn scam als Client-Protocol verwendet wird.<br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
port = port<br />
<br />
UDP-Port für scam server, default = 0<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
=== '''Radegast''' ===<br />
Abschnitt nur dann erforderlich, wenn Radegast als Client-Protokoll notwendig ist.<br />
<br />
{{OSCamConfRadegastParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
TCP/IP-Port für Radegast-Clients. Mit dem Eintrag wird das Radegast-Protokoll enabled.<br />
port =<br />
= 0 (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
<br />
Username des Radegast-Client<br />
user = username<br />
<br />
<br />
=== '''Serial''' ===<br />
Abschnitt nur dann erforderlich, wenn eine serielle Reader-Schnittstelle notwendig ist.<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
<br />
==== device ====<br />
{{Optional}}<br />
<br />
Parameter der Device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = Name der Serial Device<br />
option = timeout = Millisekunden Timeout für die Verbindung default: 50<br />
= delay Millisekunden Zusätzliche Verzögerung zwischen 2 Characters<br />
<br />
Unterstützte Serial Devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
<br />
=== '''Cccam (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn Cccam als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCccamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6206:01/07/2012</span><br />
<br />
TCP/IP-Ports für CCcam-Clients. Mit dem Eintrag eines oder mehrerer Ports wird das CCcam-Protokoll enabled.<br />
<br />
port = 0|port[,port...]<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled<br />
<br />
<br />
==== version ====<br />
{{Optional}}<br />
Definiert die Version von CCcam, mindestens Version 2.0.11, Default-Wert = 0<br />
<nowiki><main version>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
version = 2.0.11<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
==== reshare ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Reshare-Level<br />
-1 = kein Resharing<br />
0 = nur Reshare für Direct-Peer<br />
1 = Reshare für Direct-Peer und den nächsten Level<br />
x = Reshare für Direct-Peer und die nächsten x Level (x steht für die Zahl der Level)<br />
<br />
Beispiel<br />
reshare = 1 Reshare nur für Direct-Peer und den nächsten Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
==== reshare_mode ====<br />
{{Optional}}<br />
Arten des reshare:<br />
0 = reader reshared nur empfangene SCs für CCcam-reader<br />
1 = reader reshared empfangene SCs (wie=0) und definierte services<br />
2 = reader reshared nur definierte reader-services als virtueller SC<br />
3 = reader reshared nur definierte user-services als virtueller SC<br />
<br />
<br />
==== ignorereshare ====<br />
{{Optional}}<br />
CCcam Reshare-Einstellungen<br />
0 = benutze die Reshare-Einstellungen des Servers (default)<br />
1 = benutze die Reshare-Einstellungen des Readers oder Users<br />
<br />
Beispiel<br />
ignorereshare = 1 Die Reshare-Einstellungen des Readers oder Users werden benutzt<br />
<br />
<br />
==== stealth ====<br />
{{Optional}}<br />
Versteckt aktive user und das extended OSCam-Protokoll. Schützt andere OSCam-user davor, den Server als OSCam-Server zu entdecken!<br />
stealth = 1 # Tarnung eingeschaltet<br />
= 0 # Tarnung aus (default)<br />
<br />
<br />
==== minimizecards ====<br />
{{Optional}}<br />
Modus der Verbindung von CCcam-Servern zu CCcam-Clienten<br />
0 = Keine Aggregation, nur Duplikate werden entfernt (default)<br />
1 = Basierend auf Minimum-Hop: zwei SC's mit unterschiedlichen hops werden zusammengefasst, neue SC's bekommen einen kleineren hop<br />
2 = Aggregation auf CAIDs basierend: alle SC's mit der gleichen CAID werden zusammengefasst, Provider wird entfernt<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional}}<br />
Interval in Sekunden zur Verteilung der share list updates an die Clienten.<br />
<br />
0 = Update basiert auf Server-Updates, Werte kleiner als 10 sind ungültig und werden auf 30 gesetzt.<br />
= [blank) 240 (default)<br />
<br />
<br />
==== keepconnected ====<br />
{{Optional}}<br />
CCcam Keepalive-Modus:<br />
0 = Trenne Client, wenn die maximale Leerlaufzeit (idletime) erreicht ist<br />
1 = Halte die Verbindung (default)<br />
<br />
<br />
==== recv_timeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7672:10/09/2012</span><br />
<br />
recv_timeout = Millisekunden<br />
<br />
hier kann ein network-timeout beim Empfang von Daten gesetzt werden<br />
default = 2000<br />
<br />
<br />
==== forward_origin_card ====<br />
{{Optional}}<br />
forward_origin_card = 0|1<br />
<br />
Weiterleitung des ECM-Requests an den reader, der diese Karte hat.<br /><br />
Loadbalancer und Caching werden dabei deaktiviert.<br />
<br />
1 = Weiterleitung eingeschaltet<br />
0 = Aus (default)<br />
<br />
<br />
==== nodeid ====<br />
{{Optional}}<br />
nodeid = ID<br />
<br />
setzt CCcam node ID in '''hex''', <br />
<br />
default:none<br />
<br />
Beispiel:<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br />
Wenn eine nodeid benutzt wird, dann wechselt der Server das Protokol von "cccam ext" zu "cccam".<br />
<br />
<br />
=== '''Pandora''' ===<br />
{{OSCamConfPandoraParameter}}<br />
==== pand_skip_send_dw ====<br />
pand_skip_send_dw = dummy<br />
<br />
==== pand_allowed ====<br />
pand_allowed = dummy<br />
<br />
==== pand_usr ====<br />
pand_user = dummy<br />
<br />
==== pand_pass ====<br />
pand_pass = dummy<br />
<br />
==== pand_ecm ====<br />
pand_ecm = dummy<br />
<br />
==== pand_port ====<br />
pand_port = dummy<br />
<br />
==== pand_srvid ====<br />
pand_srvid = dummy<br />
<br />
<br />
=== '''GBox''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
{{OScamConfGboxParameter}}<br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBox läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
===== my_password =====<br />
{{Mandatory}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9163:12/31/2013</span><br />
'''moved from oscam.server'''<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
Passwort = 4 hex bytes, 8 chara<br />
<br />
Mein Passwort<br />
<br />
Beispiel<br />
98AF3E25<br />
<br />
<br />
==== proxy_card ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy_Card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
proxy reader SmartCard(s), die mit gbox network reshared werden, default = none<br />
<br />
<br />
==== ccc_reshare ====<br />
{{Optional}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = cccam Karten können ins gbox Netzwerk transportiert werden , default = 0 (global setting)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Caid der Karten müssen in 'ccc_gbx_caid =' spezifiziert werden<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Der Share Level für jeden peer wird spezifiziert in oscam.server [reader]-> cccam_reshare<br />
<br />
<br/><br />
<br />
==== ccc_gbx_caid ====<br />
{{Optional/en}}<br />
<br />
ccc_gbx_caid = caid_1,caid_2,...<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' 'ccc_reshare' muß zusätzlich gesetzt werden<br />
<br />
<br/><br />
<br />
==== hostname ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
hostname = eigene IP oder hostname<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
port = port[,port]... udp ports, die die gbox überwacht<br />
<br />
==== my_vers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9645:04/09/2014</span><br />
<br />
my_vers = version<br />
<br />
hier kann das low byte (hex) der eigenen gbox version gesetzt werden<br />
<br />
default = 2A<br />
<br />
==== my_cpu_api ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9712:05/11/2014</span><br />
<br />
my-cpu_api = byte<br />
<br />
Setze CPU und API Byte in hexadecimal<br />
default = 40<br />
<br />
<br />
==== gbox_reconnect ====<br />
{{Optional}}<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min=60, max=300<br />
<br />
==== gsms_disable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9714:05/11/2014</span><br />
<br />
gsms_disable = 0|1<br />
<br />
schaltet gbox short message service (GSMS) aus, <br />
default = 1<br />
<br />
==== tmp_dir ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/2014</span><br />
<br />
tmp_dir = path<br />
<br />
tempory directory für gbox<br />
<br />
default = /tmp/.oscam<br />
<br />
<br />
=== '''DVBapi''' ===<br />
{{Optional}}<br />
Abschnitt nur dann erforderlich, wenn OScam auch als Client zum entschlüsseln eingesetzt werden soll.<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional}}<br />
DVBapi zum lokalen Entschlüsseln verwenden<br />
<br />
Beispiel:<br />
enabled = 0 # (deaktiviert)<br />
enabled = 1 # (aktiviert)<br />
<br />
Default:<br />
enabled = 0<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
Hier wird der User festgelegt, dieser sollte in der oscam.user angelegt sein.<br />
<br />
Beispiel:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
<br />
==== au ====<br />
{{Optional}}<br />
Autoupdate für DVB API aktivieren/deaktivieren.<br />
Abhängig vom verwendeten User aus der oscam.user und dessen au Einstellungen.<br />
<br />
Beispiel:<br />
au = 0 # AU deaktiviert (default)<br />
au = 1 # AU aktiviert<br />
<br />
<br />
==== pmt_mode ====<br />
{{Optional}}<br />
Beispiel:<br />
pmt_mode = 0 # (verwendet camd.socket und PMT Datei)<br />
pmt_mode = 1 # (deaktiviert PMT Datei)<br />
pmt_mode = 2 # (deaktiviert camd.socket)<br />
pmt_mode = 3 # (liest PMT nur beim Start ein)<br />
pmt_mode = 4 # (do not use signal handler for monitoring /tmp)<br />
pmt_mode = 5 # (do not use signal handler for monitoring /tmp & disable camd.socket)<br />
<br />
Default:<br />
pmt_mode = 0<br />
<br />
<br />
==== request_mode ====<br />
{{Optional}}<br />
CAID request mode: <br />
<br />
Beispiel:<br />
request_mode = 0 # versuche alle möglichen CAIDs nacheinander (default) <br />
request_mode = 1 # versuche alle CAIDs simultan<br />
<br />
<br />
==== listen_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP IP port für SAT IP clients. Die Filterung muss auf der Client-Seite erfolgen!<br />
<br />
0 = disabled (default)<br />
<br />
<br />
==== boxtype ====<br />
{{Mandatory}}<br />
Verwendete Box auf der DVB API aktiviert wurde.<br />
<br />
Beispiel:<br />
boxtype = ufs910<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt||qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
Hinweis:<br />
pc steht für generic pc support (laufend supported bei VDR mit vdr-plugin-dvbapi)<br />
<br /><br />
<br />
==== cw_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
cw_delay = in Millisekunden<br />
<br />
Delay beim Schreiben des CW. default = [blank] kein Delay<br />
<br />
<br />
==== delayer ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6808:05/14/2012</span><br />
<br />
delayer = Millisekunden<br />
<br />
Minimum der Zeit, um CW zu schreiben. default: 0<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
<br />
Öffnet die demux-device nach jedem Kanalwechsel neu, default = 0<br />
<br />
<br />
==== decodeforever ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = versuche dauernd auf allen CAIDs zu decodieren<br />
0 = default<br />
<br />
<br />
==== ecminfo_type ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10722:06/13/2015</span><br />
<br /><br />
Definiert die Syntax der Ausgabe in die ecm.info . <br />
<br />
ecminfo_type = 0|1|2|3|4|5 <br />
<br />
Die möglichen Werte bedeuten:<br /><br />
0 - normale oscam syntax<br />
1 - normale oscam syntax, aber die ECMTime wird in Millisekunden anstatt Sekunden angezeigt<br />
2 - wicardd (*1)<br />
3 - mgcamd<br />
4 - cccam<br />
5 - camd3<br />
<br />
(*1)Beispiel:<br /><br />
system: Nagra<br /><br />
caid: 0x1830<br /><br />
pid: 0x1CCE<br /><br />
prov: 000000<br /><br />
cw0: FF A3 7F F1 B8 29 E7 C8<br /><br />
cw1: CB E1 A3 D3 EF FE EF C0<br /><br />
Signature OK<br /><br />
source: ServerXY (cs378x at server:12345)<br /><br />
418 msec -- Sun Jun 14 18:55:37 2015<br /><br />
<br /><br />
<br />
==== read_sdt ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10766:06/15/15</span><br />
<br />
Durch diese Option kann Oscam (mittels Dvbapi) automatisch Kanalname und Providername in die oscam.srvid bzw oscam.srvid2 sowie oscam.provid eintragen. Dazu muss man mindestens 30 Sekunden auf einem Kanal verweilen. Dabei werden allerdings nur noch nicht vorhandene Namen hinzugefügt, bereits vorhandene Einträge in den Dateien werden nicht verändert. So behält man die volle Kontrolle über den Inhalt der Dateien.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = ausgeschaltet (default)<br />
1 = eingeschaltet, aber FTA-Kanäle nicht verarbeiten<br />
2 = eingeschaltet, auch FTA-Kanäle verarbeiten<br />
<br />
==== write_sdt_prov ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10841:06/27/15</span><br />
<br />
Mit dieser Option kann man einstellen, ob die Providernamen zusätzlich in die oscam.srvid bzw oscam.srvid2 eingetragen werden sollen. Dies ist nicht unbedingt erforderlich, weil der Providername automatisch aus der oscam.provid ausgelesen wird. Für diese Option ist das Einschalten von read_sdt erforderlich.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = ausgeschaltet, Providernamen nicht in die oscam.srvid bzw oscam.srvid2 eintragen (default)<br />
1 = eingeschaltet, Providernamen eintragen<br />
<br />
=== '''Anticasc''' ===<br />
Abschnitt nur dann erforderlich, wenn Anticascading als Schutz vor unbefugtem Weiterreichen von Cardsharing angewendet werden soll.<br />
<br />
{{OSCamConfAnticascParameter}}<br />
<br />
<br />
==== enabled ====<br />
{{Mandatory}}<br />
Hiermit wird Anticascading eingeschaltet.<br />
enabled = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== numusers ====<br />
{{Optional}}<br />
Zahl der User, die je Account zugelassen sind.<br />
numusers = 1 # Es ist ein User je Account zugelassen<br />
= 0 # Anticascading ausgeschaltet (default)<br />
<br />
<br />
==== sampletime ====<br />
{{Optional}}<br />
Zeit in Minuten für das Sammeln der Anfragen<br />
sampletime = 5 # Zeitraum von 5 Minuten<br />
= # [blank] Default-Wert 2 Minuten<br />
<br />
<br />
==== samples ====<br />
{{Optional}}<br />
Zahl der Anfragen über dem Limit (mögliche Werte zwischen 2 und 10)<br />
samples = 7 # Limit bei 7 Anfragen<br />
= # [blank] Default-Wert 10 Anfragen<br />
<br />
<br />
==== penalty ====<br />
{{Optional}}<br />
Strafe für den Sünder<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
<br />
Die Strafe kann in der oscam.user überschrieben werden! <br />
<br />
'''Hinweis:''' Fake-CW`s schaden nicht nur demjenigen, dem sie schaden sollen, sondern allen anderen im Share, denn weder oscam noch cccam kann Fake-CW`s von realen CW`s unterscheiden. Wenn also ein Sharepartner von uns ein Fake-CW bekommt und der es dann für 7 Sekunden im cache hat, kann das durch cache2-Hits unbegrenzt an weitere Sharepartner gehen, auch trotz Einstellung von cccmaxhops = 0. Es haben dann unzählige User plötzlich für 7 Sekunden einen Freezer und keiner weiss, warum. Man schadet so also unbewusst allen Sharepartnern, auch denen, mit denen man nicht direkt shart!<br />
<br />
Beispiel<br />
penalty = 3 # Sende korrekte CWs zeitversetzt<br />
<br />
<br />
==== aclogfile ====<br />
{{Optional}}<br />
Dateiname für das AC-Log<br />
aclogfile =<br />
= # [blank] Kein Logfile (default)<br />
<br />
<br />
==== fakedelay ====<br />
{{Optional}}<br />
Fake-Verzögerung in Millisekunden (mögliche Werte zwischen 100 und 3000)<br />
<br />
Beispiel<br />
fakedelay = 500 # Verzögerung von 500 Millisekunden<br />
= # [blank] Default-Wert 1000 Millisekunden<br />
<br />
<br />
==== denysamples ====<br />
{{Optional}}<br />
Wieviel Samples sollen bestraft werden?<br />
<br />
Beispiel<br />
denysamples = 10 # Ab 10 Samples wird bestraft<br />
= # [blank] Default-Wert 8 Samples<br />
<br />
==== acosc_enabled ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
'''Vorbemerkung:'''<br />
mit den nachfolgenden acosc-Parametern wir ein Anticascading über das Zählen der SIDs ('''a'''nticascading '''o'''ver '''s'''id '''c'''ount) ermöglicht.<br />
<br />
acosc_enabled = 0|1<br />
1 = ermöglicht anticascading over SIDs count<br />
0 = default<br />
<br />
<br />
==== acosc_max_active_sids ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = Anzahl<br />
<br />
Maximum aktiver SIDs bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden!<br />
<br />
<br />
==== acosc_zap_limit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = Anzahl<br />
<br />
Zap-Limit bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
Strafe für den Sünder bei Anticascading over SIDs count:<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = Sekunden<br />
<br />
Dauer der Strafe bei Anticascading over SIDs count:<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
==== acosc_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_delay = Millisekunden<br />
<br />
Verzögerung bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.conf&diff=13524
OSCam/de/Config/oscam.conf
2020-02-24T17:12:17Z
<p>Felixka: /* ccc_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.conf''' ==<br />
Dies ist die Hauptkonfigurationsdatei für OSCam. Sie enhält globale Parameter z.B. für das Debuggen, Loggen und den Loadbalancer, sowie einzelne Sektionen für Sondereffekte wie z.B. den Monitor, das Web-Interface, die Protokolle, das DVBapi und das Anti-Cascading. Nur die Sektion [global] ist Pflichtbestandteil, alle übrigen Sektionen sind optional (also nur bei Bedarf) zu verwenden.<br />
<br />
<br />
=== '''Globale Parameter''' ===<br />
Folgende Parameter gibt es im [global] Abschnitt:<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Ist ein Parameter leer oder wird er nicht im Konfigurationsfile angeführt dann gelten die Default-Werte!<br />
<br />
<br />
==== nice ====<br />
{{Optional}}<br />
'''Systempriorität'''. OSCam benötigt fast keine CPU-Leistung. Wenn aber CPU-Leistung benötigt wird, sollte diese sofort zur Verfügung stehen. Werte von 20 bis -20 sind möglich, wobei 20 gering und -20 sehr hoch ist. Wird der Parameter auskommentiert(#), wird diese Funktion nicht ausgerufen. Das ist wichtig z.B. für die dbox 2[http://de.wikipedia.org/wiki/DBOX2], wenn die Fehlermeldung "''relocation error:setpriority''" erscheint. Vgl. [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Beispiel:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
<br />
===== pidfile =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8176/01/24/2013</span><br />
<br />
pidfile = filename, <br />
<br />
ändere den Namen für das pidfile und den Speicherort,<br />
mit [blank] none (default)erfolgt die Speicherung als oscam.pid in /tmp<br />
<br />
Beispiel:<br />
pidfile = /var/run/oscam.pid<br />
<br />
<br />
===== logfile =====<br />
{{Optional}}<br />
Mit diesem Parameter wird Name und Pfad und für das Logfile (mehrere sind nicht möglich) festgelegt, zusätzlich auch das Loggen in stdout oder syslog. Es ist auch möglich, das Loggen nur für stdout oder syslog festzulegen und somit keine Logdatei zu schreiben.<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
Möglichkeiten:<br />
logfile = /var/log/oscam.log # Datei oder Linuxdevice (z.B. /dev/tty)<br />
logfile = syslog # Die Ausgabe wird an den syslogd übergeben<br />
logfile = stdout # Bildschirmausgabe<br />
<br />
Beispiel:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format des logfile:<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timed out<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
<br />
===== ecmfmt =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8056:01/03/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
definiert ECM log format, default:c@p/i/s/l:h:Y:t <br />
<br />
mögliche Variablen: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and cccam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , diese ID wird durch die Tierbeschreibung aus der oscam.tiers (falls vorhanden) ersetzt<br />
w = CW<br />
y = Payload (kurz, 3 Bytes)<br />
Y = Payload (lang, 6 Bytes)<br />
<br />
benutze einen Wert als Prefix, um eine Variable mit diesem Wert zu verbergen<br />
<br />
Beispiel:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w <br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn10048:11/30/13/2013</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs werden eingefügt, wenn CWs nicht ein ungleiches oder gleiches Muster haben (default)<br />
1 = disabled<br />
<br />
<br />
===== loghistorysize =====<br />
{{Optional}}<br />
loghistorysize = bytes<br />
<br />
Größe der Log-Messages-History im WebIf oder Monitor in Bytes<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) # ist nur wirksam, wenn '''preferlocalcards = 1''' in der [global] section gesetzt ist, sonst unter stage 3!<br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
Beispiel:<br />
<br />
P/2/2/2 oder L/2/4/4<br />
<br />
<br />
===== maxlogsize =====<br />
{{Mandatory}}<br />
<br />
Hier kann die maximale Größe des Logfiles in KBytes festgelegt werde. Das ist besonders wichtig für Server mit nur geringem Speicherumfang (z.B. auf dbox2). Darum wird dringend empfohlen, bei solchen Servern diese Größe sorgfältig zu bestimmen. Nicht selten "platzt" ein System, weil die Logfiles unkontrolliert riesige Ausmaße angenommen haben!<br />
<br />
Beispiel<br />
maxlogsize = 20 # Logfile geht bis zu 20 KBytes<br />
= 0 # Logfile erhält '''unbegrenzte''' Größe<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile geht bis zu 10 KBytes (default)<br />
<br />
<br />
===== logduplicatelines =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8290/02/05/2013</span> <br />
<br />
logduplicatelines = 0|1<br />
<br />
= 1 schaltet das Schreiben von Duplikatzeilen im Logfile aus<br />
= 0 schaltet das Schreiben von Duplikatzeilen im Logfile ein = default<br />
<br />
<br />
===== disablelog =====<br />
{{Optional}}<br />
Schaltet Logfile<br />
1 = Ausschalter ein, also '''kein''' Log - puh ;-) -<br />
0 = Ausschalter aus, also '''ein''' Log<br />
<br />
Beispiel:<br />
disablelog = 1 # es wird '''kein''' Log erstellt<br />
<br />
Default:<br />
disablelog = 0 # es wird '''ein''' Log erstellt<br />
<br />
<br />
===== cwlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für CW-Logging eingestellt werden. Der Pfad ist relativ zum Workdirectory und muss existieren, sonst werden keine Logs erstellt und auch keine Fehler ausgegeben.<br />
<br />
CWs (control words) sind die Antworten der Karte mit der ein bestimmter Sender für einige Sekunden freigeschaltet wird bevor das nächste cw übertragen wird. Die cw Logdatei kann dazu verwendet werden, den Sender zeitversetzt zu entschlüsseln. Das wird auch "Offline Decoding" genannt. Siehe [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
OScam erstellt für jeden Sender und jeden Tag eine neue *.cwl Datei mit Datum, Service-ID und Sendername, z.B. 110808_I000B_Sky_Cinema_+1.cwl mit diesem Inhalt:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
Wenn mindestens ein User diesen Sender schaut, werden alle notwendigen CWs gespeichert.<br />
Bitte einen Speicherort mit genügend Platz angeben, da pro Tag und Sender einge 10KB an Daten anfallen. Empfehlenswert ist ein Skript, das die logfiles regelmässig verschiebt/löscht.<br />
<br />
Beispiel:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] kein Pfad für CW-Log, Logging abgeschaltet<br />
<br />
<br />
===== emmlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für EMM-Logging eingestellt werden. Welche EMMs mitgeloggt werden sollen, kann mit den "saveemm-*"-Parametern in der oscam.server detailliert eingestellt werden.<br />
<br />
Beispiel:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] Es wird der Config-Ordner verwendet<br />
<br />
<br />
===== usrfile =====<br />
{{Optional}}<br />
Festlegung des Namens eines Files für user logging.<br />
<br />
Das user logging file hat folgendes Format<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Beispiel:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
<br />
===== disableuserfile =====<br />
{{Optional}}<br />
Jetzt wird es ganz wild: Auch wenn ein Logfile eingeschaltet ist (siehe logfile) kann hier das userfile ausgeschaltet werden.<br />
<br />
Beispiel:<br />
disableuserfile = 1 # es wird '''kein''' userfile erzeugt<br />
= 0 # es wird '''ein''' userfile erzeugt<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
<br />
===== usrfileflag =====<br />
{{Optional}}<br />
Einstellung des Logging-Modus<br />
0 = Es wird nur das Ein- und Ausloggen des Clients im Userfile geloggt<br />
1 = Jedes Zappen eines Clients wird im Userfile geloggt<br />
Default-Wert ist 0<br />
<br />
Beispiel:<br />
usrfileflag = 1 # Alles wird geloggt<br />
<br />
Default:<br />
usrfileflag = 0 # Nur Login und Logout wird geloggt<br />
<br />
<br />
===== saveinithistory =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn7128;07/02/2012</span><br />
<br />
Sicherung der Reader-Init-History. Wird benötigt, um die Entitlements anzuzeigen.<br />
<br />
Beispiel:<br />
saveinithistory = 1 # Sicherung nach /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # Keine Sicherung<br />
<br />
<br />
===== disablemail =====<br />
{{Optional}}<br />
disablemail = 0|1<br />
<br />
Schaltet das Speichern von NDS Videoguard MailMessages des Providers aus. Default: 1 (disabled)<br />
<br />
<br />
===== mailfile =====<br />
{{Optional}}<br />
mailfile = file<br />
<br />
Legt das File fest, in dem NDS Videoguard MailMessages des Providers gespeichert werden sollen.<br />
<br />
Default: [blank] kein File.<br />
<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
Delay in Millisekunden für eine Anfrage an cache exchange mode 1 reader, default: kein delay<br />
<br />
<br />
==== reader ====<br />
===== enableled =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
<br />
===== serialreadertimeout =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8541:03/13/2013</span><br />
<br />
'''Nur wenn Serialreader benutzt wird'''<br />
Timeout in Millisekunden für Serialreader<br />
<br />
Beispiel:<br />
serialreadertimeout = 1200 # Timeout nach 1200 Millisekunden<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout nach 1500 Millisekunden<br />
<br />
<br />
===== waitforcards =====<br />
{{Optional}}<br />
Hier kann festgelegt werden, ob OSCam beim Start des Programms auf lokale Karten wartet, bevor die Netzwerkports geöffnet werden.<br />
<br />
Beispiel:<br />
waitforcards = 0 # Nicht Warten<br />
<br />
Default:<br />
waitforcards = 1 # Warten<br />
<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional}}<br />
waitforcards_extra_delay = Millisekunden<br />
<br />
Zusätzliche Verzögerung in Millisekunden nach Warten auf lokale SCs während des Starts vor dem Öffnen von Netzwerk-Ports<br />
<br />
default = 500<br />
<br />
<br />
===== preferlocalcards =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9605:03/29/2014</span><br />
<br />
Der Parameter legt fest, welche Quelle zuerst für die Dekodierung verwendet werden sollen.<br />
<br />
Beispiel:<br />
preferlocalcards = 0 # lokale Karten werden wie remote Reader behandelt<br />
<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
preferlocalcards = 2 # Lokale Karten werden dem CacheEX vorgezogen<br />
<br />
Default:<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
<br />
===== readerrestartseconds =====<br />
{{Optional}}<br />
Festlegung einer Wartezeit in Sekunden zwischen Restarts von Readern.<br />
<br />
Beispiel:<br />
readerrestartseconds = 10 # Wartezeit 10 Sekunden<br />
= 0 # '''keine Readerrestarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # Wartezeit 5 Sekunden<br />
<br />
<br />
===== block_same_ip =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_ip = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit derselben IP-Addresse zurück, default = 1<br />
0 = nicht zurückweisen<br />
<br />
<br />
===== block_same_name =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_name = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit demselben Namen zurück, default = 1<br />
0 = Nicht zurückweisen<br />
<br />
<br />
==== cache ====<br />
===== cachedelay =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
<br />
===== max_cache_time =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clienten-Anfrage im cache verbleiben. Die zeit muss 2 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
===== max_cache_count =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = Anzahl, default 1000<br />
<br />
Maximale Zahl von CWs im cache<br />
<br />
<br />
===== cacheexwaittime =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
Maximale Wartezeit für einen Cache-Zugriff in Millisekunden für cacheex = 1 Reader.<br />
50 Millisekunden = default<br />
<br />
<br />
===== cacheexenablestats =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== client ====<br />
===== clienttimeout =====<br />
{{Optional}}<br />
<br />
Maximale Zeit in Millisekunden, bevor ein Client ein Timeout erhält.<br />
<br />
Beispiele:<br />
clienttimeout = 10000 # nach 10 Sekunden erfolgt ein Timeout<br />
clienttimeout = 10 # hier erfolgt aber ein Timeout bereits nach 10 Millisekunden, s. Hinweis unten!<br />
clienttimeout = 8 # der Timeout erfolgt nach 8000 Millisekunden (= 8 Sekunden), s. Hinweis<br />
Default:<br />
clienttimeout = 5000 # nach 5000 ms (=5 Sekunden) erfolgt ein Timeout<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bei Werten < 10 (also 1 bis 9) werden diese mit Eintausend multipliziert, aus "5" wird also 5000 ms. Eine eingetragene "10" bleibt aber bei zehn Millisekunden!<br />
<br />
===== clientmaxidle =====<br />
{{Optional}}<br />
Begrenzt die Leerlaufzeit eines Clienten in '''Sekunden''' bevor er vom Traffic getrennt wird.<br />
<br />
Beispiel:<br />
clientmaxidle = 200 # Trennung nach 200 Sekunden<br />
= 0 # Begrenzung ist ausgeschaltet, keine Trennung vom Traffic beim Leerlauf!<br />
<br />
Default:<br />
clientmaxidle = 120 # Trennung nach 120 Sekunden<br />
<br />
<br />
===== suppresscmd08 =====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
suppresscmd08 = 0 # Mitteilung an Clienten mit den Protokollen camd 3.5x, 3.57x und 3.78x, keine neuen Anfragen wegen <br />
zurückgewiesener Kombination aus CAID, SID und Provider-ID zu schicken (default)<br />
= 1 # Anfragen sollen weiterhin geschickt werden<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
<br />
==== fallbacktimeout ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Bei mehreren Readern (Siehe Abschnitt [reader] in oscam.server) kann ein Reader bestimmt werden, auf den z.B. bei einer Störung der übrigen Reader der traffic zurück fällt.<br />
<br />
Maximale Wartezeit des [[Cardserver]]s in Millisekunden auf primäre [[Reader]], bevor der/die [[Fallback]]-Reader (falls vorhanden!) befragt werden.<br />
<br />
Beispiel:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Der Wert muss größer dem Wert von "serialreadertimeout" gewählt werden, ansonsten werden die Standardwerte verwendet.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = Millisekunden<br />
<br />
Wartezeit in Millisekunden, bevor der für eine CAID reservierte [[Reader]] befragt wird.<br />
<br />
Default = 2500<br />
<br />
<br />
==== sleep ====<br />
{{Optional}}<br />
Alle User nach "n" Minuten "inaktivieren", wenn diese den Sender nicht innerhalb der eingestellten Zeit wechseln. Diese Einstellung kann auch für jeden User separat vorgenommen werden: [[OSCam/de/Config/oscam.user#sleep]]<br />
<br />
Beispiel:<br />
sleep = 240 # inaktiv nach 4 Stunden<br />
<br />
Default:<br />
sleep = # [blank]<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam hört auf ALLE IP Adressen.<br />
<br />
<br />
==== bindwait ====<br />
{{Optional}}<br />
Maximale Zeit in Sekunden, die der [[Cardreader]] beim Start wartet, bis er den jeweiligen Netzwerk-Port in Zugriff bekommt. Falls der OSCam innerhalb dieser Zeit den Port nicht binden kann, terminiert er mit "Bind Request failed". Ursachen dafür sind<br />
* Doppelbelegung von Ports<br />
* Ein vormals abgestürzter OSCam der die Ports nicht wieder freigegeben hat<br />
* OSCam wurde mehrmals gleichzeitig gestartet<br />
<br />
Beispiel:<br />
bindwait = 20 # Wartezeit 20 Sekunden<br />
<br />
Default:<br />
bindwait = 120 # Wartezeit 120 Sekunden<br />
<br />
<br />
==== netprio ====<br />
{{Optional}}<br />
Hier kann die Priorität des Cardservers im Netzwerk festgelegt werden<br />
<br />
Beispiel:<br />
netprio = 1 # Prioritätsstufe 1<br />
<br />
Default:<br />
netprio = 0 # Systembedingte Priorität<br />
<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional}}<br />
Art der DNS-Auflösung. Dies sind zwei verschiedene libc-Aufrufe für die Namensauflösung, weil einige ältere Systeme Probleme mit der moderneren Implementierung ''getadressinfo'' haben bzw. diese Funktion aus ihren Images gestrippt wurden (zB die alte dBox2). Außerdem ist ''getadressinfo'' threadsafe, während ''gethostbyname'' es nicht ist und deshalb locks drumherum im Code benötigt. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Beispiel:<br />
resolvegethostbyname = 1 # Name wird mittels ''gethostbyname'' aufgelöst<br />
<br />
Default:<br />
resolvegethostbyname = 0 # ''getadressinfo'' wird benutzt<br />
<br />
<br />
====failbancount====<br />
{{Optional}}<br />
Failbancount = Anzahl der erlaubten Fehlversuche mit falschen Zugangsdaten. <br />
= 0 (default) IP wird sofort beim ersten Versuch mit unbekannten Zugangsdaten gesperrt!<br />
<br />
Wenn innerhalb '''failbantime''' mehr als in '''failbancount''' erlaubte Versuche registriert wurden, wird die IP für die restliche failbantime gesperrt. Nach Ablauf von failbantime stehen wieder volle failbancount zur Verfügung. Failbancount ist also eine Lockerung der Regeln<br />
<br />
<br />
==== failbantime ====<br />
{{Optional}}<br />
Zeitspanne in Minuten, für die ein Client mit ungültigem Login-Versuch auf IP-Basis geblockt wird.<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP Adresse wird für 5 Minuten geblockt. Neue Loginversuche werden ignoriert auch wenn das Login OK wäre.<br />
# Es wird kein Clientthread erstellt.<br />
<br />
Default:<br />
failbantime = 0 # failban ist ausgeschaltet (default)<br />
<br />
<br />
==== dropdups ====<br />
{{Optional}}<br />
Möglichkeiten zur Duplizierung von Client-Verbindungen. Es wird damit die Reaktion auf den [[OSCam/de/Config/oscam.user#uniq|uniq]]-Parameter festgelegt.<br />
<br />
0 = Markierung des Clienten als Duplikat aber keine Trennung (default)<br />
1 = Abbrechen der Duplikat-Verbindung anstelle einer Markierung als Duplikat<br />
<br />
<br />
==== unlockparental ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7289:08/27/2012</span><br />
<br />
'''Nur Seca und Viaccess'''<br />
<br />
Option zum Ausschalten der Jugendschutzfunktion für Seca und Viaccess Pin Code Anfragen bei adult movies.<br />
Bei Viaccess z.B. für die Redlight Elite HD Smartcard. Mit unlockparental = 0 bleibt Dorcel Dunkel mit 1 wirds hell!<br />
<br />
Beispiel:<br />
unlockparental = 1 # Jugendschutzfunktion ausgeschaltet<br />
<br />
Default:<br />
unlockparental = 0 # Jugendschutzfunktion von Seca und Viaccess eingeschaltet<br />
<br />
<br />
==== double_check ====<br />
{{Optional}}<br />
'''Nur wenn CW double check ausgewählt ist!'''<br />
<br />
ECM wird zu 2 oder mehr Readern mit der selben SC gesandt und die CW's werden gegeneinander verifiziert. lb_nbes_reader muss auf 2 oder höher gesetzt werden.<br />
<br />
Beispiel:<br />
double_check =<br />
<br />
Default:<br />
double_check = 0<br />
<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|erste 2 digits von CAID1],[CAID2|erste 2 digits von CAID2],... = [blank] keine [default]<br />
<br />
ECM wird an 2 oder mehr Reader mit der gleichen SC gesendet und die CW's werden gegen andere definierte CAIDs oder die ersten 2 bytes der CAIDs verifiziert. lb_nbest_readers muss auf 2 oder höher gesetzt sein!<br />
<br />
<br />
==== Loadbalancer ====<br />
===== lb_mode =====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Wenn hier loadbalancing aktiviert wird, dann sind die in oscam.server bei services stehenden Besonderheiten zu beachten. Siehe [[streamboard:wiki/OSCam/de/Config/oscam.server#services|Services]]!<br />
<br />
Loadbalance Mode<br />
<br />
Wenn man zwei oder mehrere gleiche Karten hat (egal ob lokal oder als Proxie), kann man die Last auf diese Karten gleichmäßig verteilen (balancieren).<br />
<br />
Beispiel:<br />
lb_mode = 0 (deaktiviert) (default)<br />
lb_mode = 1 (schnellster Reader zuerst)<br />
lb_mode = 2 (Reader der am längsten nicht geantwortet hat wird genommen)<br />
lb_mode = 3 (Reader mit der geringsten Auslastung wird verwendet)<br />
lb_mode = 10(LB ist ausgeschaltet, Senderstatistik wird trotzdem erstellt)<br />
<br />
Default:<br />
lb_mode = 0 # deaktiviert<br />
<br />
<br />
===== lb_save =====<br />
{{Optional}}<br />
Speichert die Loadbalance Statistik, damit sie auch nach einem Neustart erhalten bleibt.<br />
Um die CPU nicht zu sehr zu belasten, sollte hier ein Wert > 100 eingetragen werden.<br />
<br />
Beispiel:<br />
lb_save = 100 # Anzahl der ECM's nach der die Statistik gespeichert wird<br />
<br />
Default:<br />
lb_save = 0 # Statistik wird nicht gespeichert<br />
<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional}}<br />
Anzahl der Reader, die für die ECM anfragen.<br />
<br />
Beispiel:<br />
lb_nbest_readers = 2 # Anfragen gehen immer an zwei Reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # Anfrage geht nur an einen Reader<br />
<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional}}<br />
Anzahl der Fallback Reader für den Lastenausgleich.<br />
<br />
Beispiel:<br />
lb_nfb_readers = 2 # Zwei Fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1<br />
<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mod<br />
= 0 # Standardverfahren zum (späten) Wiederöffnen blockierender Reader (default)<br />
= 1 # Schnelles Wiederöffnen blockierender Reader<br />
<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5893:08/19/2011</span><br />
<br />
Anzahl der Reader je CAIDs für das Loadbalancing, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Default:<br />
lb_nbest_percaid = 0<br />
<br />
Beispiel:<br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wird so lange blockiert, bis die Statistik aufgeräumt ist<br />
1 = default<br />
<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = öffne alle gestoppten Reader sofort, wenn kein funktionierender Reader gefunden wird<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional}}<br />
Mindestanzahl der ECM's, die für die Auswertung genommen werden.<br />
<br />
Beispiel:<br />
lb_min_ecmcount =<br />
<br />
Default:<br />
lb_min_ecmcount = 5<br />
<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional}}<br />
Maximale Anzahl der ECM's, bevor der Loadbalancer zurückgesetzt wird.<br />
<br />
Beispiel:<br />
lb_max_ecmcount =<br />
<br />
Default:<br />
lb_max_ecmcount = 500<br />
<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional}}<br />
Zeitspanne in Sekunden zwischen neuem Verbindungsversuch zu verlorengegangenen readern/CAIDs/providers/services<br />
<br />
Beispiel:<br />
lb_reopen_seconds = 500 # Nach 500 Sekunden neuer Verbindungsversuch<br />
<br />
Default:<br />
lb_reopen_seconds = 900<br />
<br />
<br />
===== lb_retrylimit =====<br />
{{Optional}}<br />
Verbindungsversuch zum nächsten reader '''nur wenn''' die Antwortzeit höher, als hier festgelegt in '''Millisekunden'''.<br />
<br />
Beispiel:<br />
lb_retrylimit = 500 # Verbindungsversuch zum nächsten reader nur, wenn die Antwortzeit höher als 500 ms ist.<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
<br />
===== lb_savepath ===== <br />
{{Optional}}<br />
Dateiname für die Sicherung der Loadbalancing Statistiken<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional}}<br />
Zeit in Stunden, nach der die Statistiksätze gelöscht werden sollen<br />
<br />
default = 336<br />
<br />
<br />
===== lb_use_locking =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6166:12/28/2011</span><br />
<br />
Unterdrückt parallele und identische ECM-Anfragen<br />
<br />
1 = ein<br />
0 = aus # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* Man sollte diese Option nur anschalten wenn:<br />
** Langsames system<br />
** Hohe Last<br />
**Gleiche ECM Anfragen nicht aus dem Cache kommen, sondern weiter Reader angefragt werden<br />
<br />
* Vorteile aktiviert:<br />
** Durch die Synchronisierung wird ein ECM Request nach dem anderen durchgeführt, die Ermittlung von Cache oder Request und Zuordnung der Reader über den Loadbalancer ist immer erfolgreich<br />
<br />
* Nachteile aktiviert:<br />
** Die Synchronisierung verhindert Multithreading und es kommt eventuell zu höheren Antwortzeiten<br />
<br />
* Vorteile NICHT aktiviert:<br />
** Schnellere Durchlaufzeiten für ECM requests<br />
<br />
* Nachteile NICHT aktiviert:<br />
** Eventuell doppelte (bzw n-fache) ECM requests an die Reader möglich<br />
<br/><br />
<br />
<br />
===== lb_retrylimits =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,CAID2:time2]...<br />
<br />
Begrenzung der Zeit für einen retry des loadbalancing eines CAID in Millisekunden, wildcard CAIDs mit two-digit CAIDs möglich, <br />
<br />
default: [blank]<br />
<br />
Beispiel:<br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
Ignoriere die Providerinformations-CAIDs, um die statistischen Daten zu reduzieren, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Beispiel:<br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx und 34xx)<br />
<br />
default = [blank]<br />
<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # ermöglicht ein automatisches timeout auf der Basis von Statistiken des Loadbalancers<br />
= 0 # default<br />
<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = Prozent<br />
<br />
Prozentwert, mit dem die Timeout-Zeit beaufschlagt wird<br />
default = 30<br />
<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = Millisekunden<br />
<br />
Minimale Zeit in Millisekunden, die zur Timeout-Zeit hinzuaddiert wird<br />
default = 300<br />
<br />
<br />
===== lb_max_readers =====<br />
{{Optional}}<br />
lb_max_readers = limit (Zahl)<br />
<br />
beschränkt die Zahl der Reader während der Lernphase des Loadbalancing<br />
<br />
0 = unbegrenzt (default)<br />
x = beschränkt auf ein Limit von x (Zahl)<br />
<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional}}<br />
lb_auto_betatunnel = 0|1<br />
<br />
Ermöglicht automatisches Betatunneling für Betacrypt (CAIDs 1801, 1833, 1834 und 1835), wenn Loadbalancing verwendet wird<br />
lb_auto_betatunnel = 0 # ausgeschaltet<br />
= 1 # eingeschaltet (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Eintragungen für Betatunnel in oscam.user werden bevorzugt. Siehe [[streamboard:wiki/index.php/OSCam/de/Config/oscam.user#betatunnel|Betatunnel]]<br />
<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
setzt den Mode für das automatische Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only)<br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = Auswahl (Zahl)<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = immer Betacrypt<br />
105 = wählt einen Mittelwert<br />
200 = immer Nagravision<br />
<br />
<br />
=== '''Monitor''' ===<br />
Hier sind nur dann Eintragungen erforderlich, wenn ein Monitor benutzt wird!<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
UDP-Port für den Monitor<br />
port = 0 # Kein Monitor<br />
= # [blank] Portnummer Monitor ausgewählt<br />
<br />
Beispiel:<br />
port = 24480 # Monitor eingeschaltet mit Port 24480<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Service mit einer bestimmten IP-Adresse verbinden<br />
serverip = # IP-Adresse<br />
= # [blank] alle IP's (default)<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Unverschlüsselte Monitorverbindungen.<br />
<br />
Möglich<br />
* eine oder mehrere IP-Einzeladressen<br />
* eine oder mehrere IP-Bereiche<br />
* eine Mischung von IP-Einzeladressen oder IP-Bereichen<br />
<br />
Beispiel<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 und IP-Bereich 192.168.0.0 bis 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] keine unverschlüsselte Monitorverbindung.<br />
<br />
<br />
==== aulow ====<br />
{{Optional}}<br />
Zeitraum in Minuten, in dem keine EMM erscheinen, so dass der Client von "active" auf "on" gesetzt wird.<br />
<br />
Beispiel<br />
aulow = 30 # Nach 30 Minuten ohne EMM wird der Status von "active" auf "on" gesetzt (default).<br />
<br />
<br />
==== monlevel ====<br />
{{Optional}}<br />
Monitor-Level<br />
0 = Kein Zugriff auf Monitor (default)<br />
1 = Nur Server und eigene Prozeduren<br />
2 = Alle Prozeduren, aber nur ansehen<br />
3 = Alle Prozeduren, reload von oscam.user möglich<br />
4 = Unbeschränkter Zugriff<br />
<br />
Beispiel<br />
monlevel = 4 # Kompletter Zugriff<br />
<br />
Monlevel kann durch Eintragungen in oscam.user überschrieben werden!<br />
<br />
<br />
==== hideclient_to ====<br />
{{Optional}}<br />
Zeitspanne in Sekunden für das Ausblenden von Clients, die keine Anfragen senden. Siehe auch Parameter '''httphideidleclienst''' in Abschnitt [webif].<br />
hideclient_to = 40 # Clienten werden nach 40 Sekunden ohne Anfrage ausgeblendet<br />
= 0 # Keine Ausblendung von Clienten im Leerlauf<br />
<br />
<br />
==== appendchaninfo ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8546:03/13/2013</span><br />
<br />
Fügt die Channel-Info aus der oscam.services der Log-Meldung hinzu. Bei Verwendung von Monitor und Webinterface ist dies eine sehr nützliche Routine!<br />
appendchaninfo = 1 # Die Channel-Info wird hinzugefügt<br />
= 0 # Keine Channel-Info (default)<br />
<br />
<br />
=== '''lcd''' ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
<br />
==== lcd_outputpath ====<br />
{{Optional}}<br />
Hier kann ein Pfad für den LCD-Output eingestellt werden<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
<br />
==== lcd_hideidle ====<br />
{{Optional}}<br />
Verbergen eines Readers im LCD-Output während des Leerlaufs<br />
<br />
lcd_hideidle = 1 # Verbergen, wenn der Leerlauf länger als 20 Sekunden dauert<br />
= 0 # default<br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional}}<br />
LCD-Refresh-Interval in Sekunden (Minimum 5 Sekunden)<br />
<br />
Default:<br />
lcd-writeinterval = [blank] 10 Sekunden<br />
<br />
<br />
=== '''WebIf''' ===<br />
Eintragungen sind nur dann erforderlich, wenn das Web-Interface (by Alno) als Modul ausgewählt wurde.<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
<br />
==== Dateiformat zum Senden von EMMs via Webinterface ====<br />
(von Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' <br />
<br />
* Die Datei muß im TXT Format sein.<br />
* Jedes PRE-CAM EMM muss in einer eigenen Zeile vorliegen.<br />
* Die EMMs müssen im HEX Format vorliegen.<br />
** Beispiel: AABBCCDD...<br />
* Leerzeichen und Tabs zwischen den bytes sind erlaubt:<br />
** AA BB CC DD...<br />
* Groß- und/oder Kleinschreibung oder gemischte Schreibweise für jeden HEX-Wert sind erlaubt:<br />
** AA aa Aa aA...<br />
* Andere Zeichen oder Kommentare sind nicht erlaubt.<br />
<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
Port, auf dem das Webinterface hört.<br />
Standard ist Port 8888 wenn kein eintrag erfolgt<br />
<br />
httpport = 83 # Webinterface hört auf '''http-port 83'''<br />
= +83 # Webinterface hört auf '''https-port 83''' (SSL)<br />
0 # Webinterface ist ausgeschaltet<br />
<br />
<br />
==== httpcert ====<br />
{{Optional}}<br />
Datei für das SSL-Zertifikat<br />
httpcert = oscam.cert # (siehe dort!)<br />
= # [blank] es wird die Datei oscam.pem (embedded) verwendet<br />
<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
Beispiel<br />
httpforcesslv3 = 0 (default)<br />
= 1 benutze SSLv3<br />
<br />
<br />
==== httpuser ====<br />
{{Mandatory}}<br />
Name des Users für den Zugriffsschutz. Es wird zwar [blank] als Default-Wert angeboten. Davon wird aber dringend abgeraten; daher wird dieser Parameter hier als '''zwingend''' beschrieben.<br />
httpuser = # xyxyxy<br />
<br />
<br />
==== httppwd ====<br />
{{Mandatory}}<br />
Passwort für den Zugriffsschutz. Es gilt das gleiche wie für httpuser.<br />
httppwd = # 123456<br />
<br />
'''Die Parameter ''user'' und ''pwd'' werden beim Verbindungsaufbau zum Webinterface in einem Kontrollfenster abgefragt. Fehlen sie oder sind sie fehlerhaft, erfolgt die Meldung ''Forbidden'' und der Verbindungsaufbau wird abgebrochen!'''<br />
<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6825:05/15/2012</span><br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Füge den content des embedded CSS '''nicht vor''' dem content des user-css ein (default)<br />
1 # Embedded CSS wird '''vor''' dem externen CSS hinzugefügt(siehe nächsten Parameter: [[#httpcss|httpcss]])<br />
<br />
Dieser Parameter kann dazu benutzt werden, den embedded CSS mit custom styles zu überschreiben. Die laufenden CSS styles können hier angeschaut werden: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
<br />
==== httpcss ====<br />
{{Optional}}<br />
Für das Webinterface stehen verschiedene Styles in unterschiedlicher farblicher und graphischer Darstellung zur Verfügung. Der User kann die für ihn interessanten Style-Dateien (.css) speichern und je nach "Stimmung" verwenden. Hier wird der Pfad zu den Style-Dateien festgelegt.<br />
<br />
Beispiel<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] es wird der embedded Style verwendet (default)<br />
<br />
Styles werden hier veröffentlicht: [[streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
<br />
==== httptpl ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7083:06/25/12</span><br />
<br />
Pfad für externe templates und picons<br />
httptpl =<br />
= # [blank] Keine externen Templates<br />
<br />
Multiple simultane templates und picons können durch die Anlage von Unterordnern (mit max. 32 alphanumerischen Zeichen) zur Verfügung gestellt werden. Der Name des Unterordners korrespondiert mit dem Unterordner in der URL, default : [blank]<br />
<br />
Beispiele<br />
<br />
httptpl = /this/is/my/path <br />
<br />
Ordner mit multiplen templates: <br />
/this/is/my/path/template1 <br />
/this/is/my/path/template2 <br />
<br />
gültige URLs: <br />
http://host:port/template1 <br />
http://host:port/template2 <br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httpoverwritebakfile ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = überschreibe backup configurations files (*.bak)<br />
0 = default<br />
<br />
<br />
==== httplocale ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
hier kann ein "locale environment" gesetzt werden.<br />
<br />
default = [blank] kein environment<br />
<br />
Siehe auch hier:<br />
<br />
http://de.wikipedia.org/wiki/locale<br />
<br />
<br />
==== httpjscript ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
Path für oscam.js javascript, default : [blank]<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional}}<br />
Aktualisierungszeit in Sekunden, in der die (kompletten) Seiten des Webinterfaces aktualisiert werden<br />
httprefresh = 7 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httppollrefresh ====<br />
{{Optional}}<br />
<br />
Initialisierungszeit des Pollings und Aktualisierungszeit, in der diverse Daten des Webinterfaces neugeladen werden (Zeit kann auf den entsprechenden Seiten geändert werden)<br />
httppollrefresh = 60 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httpshowpicons ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # zeige picons in userlist<br />
0 # default<br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httphideidleclients ====<br />
{{Optional}}<br />
Dieser Parameter ermöglicht es, einen Clienten nach Ablauf der im Parameter '''hideclient_to''' im Abschnitt [monitor] festgelegten Leerlauf-Zeitspanne (siehe dort!) auszublenden.<br />
httphideidleclients = 1 # Ausblenden<br />
= 0 # Nicht ausblenden (default)<br />
<br />
==== httphidetype ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
Buchstabe der definiert, welcher type in der type-column auf der Statusseite des Webinterfaces versteckt werden soll. <br />
s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
<br />
==== httpscript ====<br />
{{Optional}}<br />
Pfad für Skripte, die vom Webinterface aus gestartet werden können<br />
httpscript = # Pfad<br />
= # [blank] kein Pfad<br />
<br />
<br />
==== httpallowed ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8842:08/17/2013</span><br />
<br />
Hier werden IP-Addressen, IP-Bereiche oder beides festgelegt, die auf das Webinterface zugreifen dürfen. Es wird zwar auch ein [blank] als Default-Wert angeboten, dessen Sinn sich aber nicht erschließt! Wenn das Webinterface benutzt werden soll, dann muss es auch die Möglichkeit geben, sich mit ihm zu verbinden. Daher wird dieser Parameter als '''zwingend''' dargestellt.<br />
<br />
Wenn ein localhost nach '''IPv6''' aufgelöst werden soll, muss die Zeile mit '''::1''' abgeschlossen werden!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
Beispiel<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen <br />
und werden nach IPv6 aufgelöst<br />
'''Default Werte'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255,::1<br />
<br />
<br />
==== httpdyndns ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6558:03/21/12</span><br />
<br />
Zulassen von DYNDNS-Verbindungen durch das Webinterface.<br />
<br />
httpdyndns = hostname[,hostname][,hostname]<br />
<br />
Beispiel<br />
httpdyndns = host1.exemple.com, host2.exemple.com<br />
<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional}}<br />
Sicherung der Konfigurationsdateien<br />
httpsavefullcfg = 0 # alle nicht leeren Parameter,<br />
# alle nicht Default-Parameter,<br />
# alle Parameter, die nicht den gleichen Inhalt enthalten wie dieselben Parameter in [global] (default).<br />
1 # alle Parameter<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional}}<br />
<br />
Über das Webinterface können in bestimmtem Unfang Konfigurations-Dateien editiert und gesichert werden. Das ist für den Server-Admin, der sich nicht immer in der Nähe zur Konsole des Servers befindet, sehr vorteilhaft. Wenn aber weitere User oder andere Beteiligte ebenfalls Zugang zum Webinterface und damit Zugriff auf die Daten haben, kann das zu einem Problem werden. Die Möglichkeit des Editierens (Schreibens) kann daher mit diesem Parameter ausgeschaltet werden.<br />
httpreadonly = 1 # nur Lesezugriff möglich<br />
= 0 # alles ist möglich (default)<br />
<br />
<br />
==== httpiconpath ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9463/01/28/2014</span><br />
<br />
httpiconpath = path<br />
<br />
Pfad zur Picon-Datei, default [blank] none<br />
<br />
<br />
==== httphelplang ====<br />
{{Mandatory}}<br />
httphelplang = de|en|fr|it<br />
<br />
Auswahl der Sprache für die Kontexte<br />
<br />
de = deutsch<br />
en = englisch<br />
fr = französisch<br />
it = italienisch<br />
[blank] = englisch (default)<br />
<br />
<br />
==== httposcamlabel ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
Setzt ein individuelles label für den header des Webinterfaces, default: OSCam rXXXX<br />
<br />
<br />
=== '''Cache''' ===<br />
{{OSCamConfCacheParameter}}<br />
<br />
<br />
==== delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
<br />
==== max_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
max_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clientanfrage im Cache verbleiben. Die Zeit muß 3,5 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
==== max_hit_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8910:09/10/2013</span><br />
<br />
max_hit_time = in Sekunden<br />
<br />
Maximale Zeit, die Treffer für cache exchange im cache verbleiben müssen um wait_time zu evaluieren, default: 15<br />
<br />
<br />
==== wait_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Wartezeit und Dynamische Wartezeit in Millisekunden für cache exchange und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
<br />
= [blank] none (default)<br />
<br />
'''Info:'''<br />
awtime --> Zeit die bei jeder Anfrage gewartet wird (always wait time)<br />
dwtime --> Zeit die bei positivem Fund eines CWs im Cache gewartet wird (dynamic wait time)<br />
<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
<br />
Verwendungspraxis:<br />
wait_time = 098C:5:130,09C4:5:130,1702:5:1900,1830:5:490,1843:5:490,0D05:5,0B00:5<br />
<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional}}<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode (bestimmt die Verwenung des Parameters ''counter'')<br />
<br />
0 = Falls ''wait_time'' abgelaufen ist, sende das CW mit dem höchsten counter an die clients<br />
1 = Niemals ein CW (von cacheex) aus dem cache versenden, wenn der counter aus dem cacheex den in diesem Parameter <br />
gesetzten counter nicht erreicht. Falls ''wait_time'' erreicht ist, geht der request an normale reader. <br />
Nur wenn ein CW den gesetzten counter erreicht, wird es an die clients gesendet.<br />
Default = 0<br />
<br />
<br />
* counter (bestimmt den counter des CW, der mindestens erreicht werden muss, um versendet zu werden)<br />
<br />
Default = 1 (benutze das CW mit dem höchsten counter aus dem cache)<br />
<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = erlaube bad cw's von einem festgelegten fallback reader. Default = 0<br />
<br />
<br />
'''Info:'''<br />
<br />
Bei '''aktiviertem''' Parameter wird bei einem bad CW die Anfrage an den fixed Fallback weitergeleitet<br />
und somit ein freetzer meist verhindert.<br />
<br />
<br />
Siehe --> [[OSCam/de/Config/oscam.server#fallback|fallback]]<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== csp_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von CSP-Nodes hört<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Lokale Bind-IP für csp_port (siehe oben)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 ausgeschaltet (default)<br />
= 1 eingeschaltet<br />
<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Für NDS Karten nur in einer light Version verfügbar''' <br />
<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID, für die der CW-Cycle-Check ermöglicht werden soll, [blank] = kein Check (Default)<br />
<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = Zahl<br />
<br />
Maximum von CW-Cycle-Entries in die Liste, default = 500, maximum = 4000<br />
<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = Minuten<br />
<br />
Minimalzeit, die ein erkannter Cycle in der Memory verbleiben soll, default = 15, maximum = 240<br />
<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = ungültige CW-Cycle kommen nur ins Log <br />
1 = ungültige CW-Cycle werden gedropped (default)<br />
<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, 1 = alte CW-Cycle werden gedropped, 0 = kein Dropping (default)<br />
<br />
<br />
==== cwcycle_sensitive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (oder mehr) gleiche bytes und drop neues CW<br />
3 = 3 (oder mehr) gleiche bytes und drop neues CW<br />
4 = 4 (oder mehr) gleiche bytes und drop neues CW<br />
<br />
--> Höherer Wert entspricht höherer Empfindlichkeit<br />
<br />
<br />
==== cwcycle_usecwcfromce ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = benutze CW Info aus cache exchange<br />
0 = default<br />
<br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
antworte, wenn das cache exchange timeout erreicht ist und keine normalen Reader zur Verfügung stehen, die ECM's senden:<br />
<br />
0 = sende sofort '''not found''' an den client (default)<br />
1 = warte auf eine Antwort für cache exchange bis der timeout für den client erreicht ist<br />
<br />
<br />
=== '''csp (UDP''') ===<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:02/16/2013 Siehe Section '''[cache]'''!</span><br />
<br />
Abschnitt nur dann erforderlich, wenn csp als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von csp-nodes hört<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
Local Bind IP für den oben genannten UDP-Port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== wait_time ====<br />
{{Mandatory}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET Siehe Section '''[cache]'''!</span><br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8060:01/04/13</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8077:01/06/13</span><br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
= [blank] none (default)<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
Wartezeit in Millisekunden für cache exchange ('''nur mode 2&3''') und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
=== '''Camd 33 (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn camd33 als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd 33 Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein Adressbereich, der unverschlüsselt übertragen wird.<br />
<br />
Beispiel:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt =<br />
<br />
<br />
==== passive ====<br />
{{Optional}}<br />
Definition für aktiven oder passiven Client. Generell geht das Camd3.3x-Protokoll von einem aktiven Client aus. Es kann aber unter bestimmten Umständen bei manchen Clients (meistens plugin) zur Schwierigkeiten kommen. In diesem Fall<br />
<br />
Beispiel:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
<br />
==== key ====<br />
{{Optional}}<br />
<br />
Schlüssel, der für die Verschlüsselung verwendet wird. (128bit Verschlüsselung)<br />
<br />
Beispiel:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key =<br />
<br />
<br />
=== '''cs357x (UDP)''' ===<br />
Abschnitt nur dann erforderlich, wenn cs357x als Client Protokoll verwendet wird.<br />
Dieses Protokoll verschlüsselt grundsätzlich und bildet den Schlüssel aus dem Benutzernamen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:'''<br />
'''cs357x''' wurde auch als '''camd35''' bezeichnet. Beide Bezeichnungen meinen das gleiche Protokoll mit den gleichen Funktionsweisen und Parametern. Künftig wird zur Vermeidung von Irritationen '''nur noch cs357x''' verwendet.<br />
<br />
Eine genauere Erklärung für UDP findet Ihr hier [http://de.wikipedia.org/wiki/User_Datagram_Protocol]<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus cs357x Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs357x -clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Tread]]<br />
<br />
<br />
=== '''cs378x''' (TCP) ===<br />
Abschnitt nur dann erforderlich, wenn cs378x als Client Protokoll notwendig ist.<br />
<br />
Eine ausführliche Erklärung von TCP findet Ihr hier [http://de.wikipedia.org/wiki/Transmission_Control_Protocol]<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein das OSCam nur antwortet wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs3.78x-clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
<br />
=== '''Newcamd (TCP)''' ===<br />
Abschnitt nur dann erforgerlich, wenn newcamd als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
<br />
==== key ====<br />
{{Mandatory}}<br />
Schlüssel für die Newcamd Verbindung zum Client.<br />
<br />
Beispiel:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Newcamd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000@1234:000000 # (CAID 1234 ist über Port 15000 erreichbar)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 ist über Port 15000 erreichbar CAID 5678 über Port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Hat der Server mehrere IP Adressen werden nur Anfragen die an die konfigurierte IP gehen beantwortet.<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein bestimmter IP Bereich der sich auf den Newcamd Server verbinden darf.<br />
<br />
Beispiel:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed =<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
Der Server versucht, die Newcamd Verbindung am leben zu halten.<br />
<br />
Beispiel:<br />
keepalive = 1 # (aktiviert)<br />
keepalive = 0 # (deaktiviert)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
<br />
==== mgclient ====<br />
{{Optional}}<br />
Aktiviert das Extendet Newcamd Protokol, um mehrer CAID's über einen Port zu schicken<br />
<br />
Beispiel:<br />
mgclient = 1 # (aktiviert)<br />
mgclient = 0 # (deaktiviert)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br />
=== '''scam''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9878:09/29/2014</span><br />
<br />
Abschnitt nur dann erforderlich, wenn scam als Client-Protocol verwendet wird.<br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
port = port<br />
<br />
UDP-Port für scam server, default = 0<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
=== '''Radegast''' ===<br />
Abschnitt nur dann erforderlich, wenn Radegast als Client-Protokoll notwendig ist.<br />
<br />
{{OSCamConfRadegastParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
TCP/IP-Port für Radegast-Clients. Mit dem Eintrag wird das Radegast-Protokoll enabled.<br />
port =<br />
= 0 (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
<br />
Username des Radegast-Client<br />
user = username<br />
<br />
<br />
=== '''Serial''' ===<br />
Abschnitt nur dann erforderlich, wenn eine serielle Reader-Schnittstelle notwendig ist.<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
<br />
==== device ====<br />
{{Optional}}<br />
<br />
Parameter der Device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = Name der Serial Device<br />
option = timeout = Millisekunden Timeout für die Verbindung default: 50<br />
= delay Millisekunden Zusätzliche Verzögerung zwischen 2 Characters<br />
<br />
Unterstützte Serial Devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
<br />
=== '''Cccam (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn Cccam als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCccamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6206:01/07/2012</span><br />
<br />
TCP/IP-Ports für CCcam-Clients. Mit dem Eintrag eines oder mehrerer Ports wird das CCcam-Protokoll enabled.<br />
<br />
port = 0|port[,port...]<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled<br />
<br />
<br />
==== version ====<br />
{{Optional}}<br />
Definiert die Version von CCcam, mindestens Version 2.0.11, Default-Wert = 0<br />
<nowiki><main version>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
version = 2.0.11<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
==== reshare ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Reshare-Level<br />
-1 = kein Resharing<br />
0 = nur Reshare für Direct-Peer<br />
1 = Reshare für Direct-Peer und den nächsten Level<br />
x = Reshare für Direct-Peer und die nächsten x Level (x steht für die Zahl der Level)<br />
<br />
Beispiel<br />
reshare = 1 Reshare nur für Direct-Peer und den nächsten Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
==== reshare_mode ====<br />
{{Optional}}<br />
Arten des reshare:<br />
0 = reader reshared nur empfangene SCs für CCcam-reader<br />
1 = reader reshared empfangene SCs (wie=0) und definierte services<br />
2 = reader reshared nur definierte reader-services als virtueller SC<br />
3 = reader reshared nur definierte user-services als virtueller SC<br />
<br />
<br />
==== ignorereshare ====<br />
{{Optional}}<br />
CCcam Reshare-Einstellungen<br />
0 = benutze die Reshare-Einstellungen des Servers (default)<br />
1 = benutze die Reshare-Einstellungen des Readers oder Users<br />
<br />
Beispiel<br />
ignorereshare = 1 Die Reshare-Einstellungen des Readers oder Users werden benutzt<br />
<br />
<br />
==== stealth ====<br />
{{Optional}}<br />
Versteckt aktive user und das extended OSCam-Protokoll. Schützt andere OSCam-user davor, den Server als OSCam-Server zu entdecken!<br />
stealth = 1 # Tarnung eingeschaltet<br />
= 0 # Tarnung aus (default)<br />
<br />
<br />
==== minimizecards ====<br />
{{Optional}}<br />
Modus der Verbindung von CCcam-Servern zu CCcam-Clienten<br />
0 = Keine Aggregation, nur Duplikate werden entfernt (default)<br />
1 = Basierend auf Minimum-Hop: zwei SC's mit unterschiedlichen hops werden zusammengefasst, neue SC's bekommen einen kleineren hop<br />
2 = Aggregation auf CAIDs basierend: alle SC's mit der gleichen CAID werden zusammengefasst, Provider wird entfernt<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional}}<br />
Interval in Sekunden zur Verteilung der share list updates an die Clienten.<br />
<br />
0 = Update basiert auf Server-Updates, Werte kleiner als 10 sind ungültig und werden auf 30 gesetzt.<br />
= [blank) 240 (default)<br />
<br />
<br />
==== keepconnected ====<br />
{{Optional}}<br />
CCcam Keepalive-Modus:<br />
0 = Trenne Client, wenn die maximale Leerlaufzeit (idletime) erreicht ist<br />
1 = Halte die Verbindung (default)<br />
<br />
<br />
==== recv_timeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7672:10/09/2012</span><br />
<br />
recv_timeout = Millisekunden<br />
<br />
hier kann ein network-timeout beim Empfang von Daten gesetzt werden<br />
default = 2000<br />
<br />
<br />
==== forward_origin_card ====<br />
{{Optional}}<br />
forward_origin_card = 0|1<br />
<br />
Weiterleitung des ECM-Requests an den reader, der diese Karte hat.<br /><br />
Loadbalancer und Caching werden dabei deaktiviert.<br />
<br />
1 = Weiterleitung eingeschaltet<br />
0 = Aus (default)<br />
<br />
<br />
==== nodeid ====<br />
{{Optional}}<br />
nodeid = ID<br />
<br />
setzt CCcam node ID in '''hex''', <br />
<br />
default:none<br />
<br />
Beispiel:<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br />
Wenn eine nodeid benutzt wird, dann wechselt der Server das Protokol von "cccam ext" zu "cccam".<br />
<br />
<br />
=== '''Pandora''' ===<br />
{{OSCamConfPandoraParameter}}<br />
==== pand_skip_send_dw ====<br />
pand_skip_send_dw = dummy<br />
<br />
==== pand_allowed ====<br />
pand_allowed = dummy<br />
<br />
==== pand_usr ====<br />
pand_user = dummy<br />
<br />
==== pand_pass ====<br />
pand_pass = dummy<br />
<br />
==== pand_ecm ====<br />
pand_ecm = dummy<br />
<br />
==== pand_port ====<br />
pand_port = dummy<br />
<br />
==== pand_srvid ====<br />
pand_srvid = dummy<br />
<br />
<br />
=== '''GBox''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
{{OScamConfGboxParameter}}<br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBox läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
===== my_password =====<br />
{{Mandatory}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9163:12/31/2013</span><br />
'''moved from oscam.server'''<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
Passwort = 4 hex bytes, 8 chara<br />
<br />
Mein Passwort<br />
<br />
Beispiel<br />
98AF3E25<br />
<br />
<br />
==== proxy_card ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy_Card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
proxy reader SmartCard(s), die mit gbox network reshared werden, default = none<br />
<br />
<br />
==== ccc_reshare ====<br />
{{Optional/en}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = cccam Karten können ins gbox Netzwerk transportiert werden , default = 0 (global setting)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Caid der Karten müssen in 'ccc_gbx_caid =' spezifiziert werden<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Der Share Level für jeden peer wird spezifiziert in oscam.server [reader]-> cccam_reshare<br />
<br />
<br/><br />
<br />
==== ccc_gbx_caid ====<br />
{{Optional/en}}<br />
<br />
ccc_gbx_caid = caid_1,caid_2,...<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' 'ccc_reshare' muß zusätzlich gesetzt werden<br />
<br />
<br/><br />
<br />
==== hostname ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
hostname = eigene IP oder hostname<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
port = port[,port]... udp ports, die die gbox überwacht<br />
<br />
==== my_vers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9645:04/09/2014</span><br />
<br />
my_vers = version<br />
<br />
hier kann das low byte (hex) der eigenen gbox version gesetzt werden<br />
<br />
default = 2A<br />
<br />
==== my_cpu_api ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9712:05/11/2014</span><br />
<br />
my-cpu_api = byte<br />
<br />
Setze CPU und API Byte in hexadecimal<br />
default = 40<br />
<br />
<br />
==== gbox_reconnect ====<br />
{{Optional}}<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min=60, max=300<br />
<br />
==== gsms_disable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9714:05/11/2014</span><br />
<br />
gsms_disable = 0|1<br />
<br />
schaltet gbox short message service (GSMS) aus, <br />
default = 1<br />
<br />
==== tmp_dir ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/2014</span><br />
<br />
tmp_dir = path<br />
<br />
tempory directory für gbox<br />
<br />
default = /tmp/.oscam<br />
<br />
<br />
=== '''DVBapi''' ===<br />
{{Optional}}<br />
Abschnitt nur dann erforderlich, wenn OScam auch als Client zum entschlüsseln eingesetzt werden soll.<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional}}<br />
DVBapi zum lokalen Entschlüsseln verwenden<br />
<br />
Beispiel:<br />
enabled = 0 # (deaktiviert)<br />
enabled = 1 # (aktiviert)<br />
<br />
Default:<br />
enabled = 0<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
Hier wird der User festgelegt, dieser sollte in der oscam.user angelegt sein.<br />
<br />
Beispiel:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
<br />
==== au ====<br />
{{Optional}}<br />
Autoupdate für DVB API aktivieren/deaktivieren.<br />
Abhängig vom verwendeten User aus der oscam.user und dessen au Einstellungen.<br />
<br />
Beispiel:<br />
au = 0 # AU deaktiviert (default)<br />
au = 1 # AU aktiviert<br />
<br />
<br />
==== pmt_mode ====<br />
{{Optional}}<br />
Beispiel:<br />
pmt_mode = 0 # (verwendet camd.socket und PMT Datei)<br />
pmt_mode = 1 # (deaktiviert PMT Datei)<br />
pmt_mode = 2 # (deaktiviert camd.socket)<br />
pmt_mode = 3 # (liest PMT nur beim Start ein)<br />
pmt_mode = 4 # (do not use signal handler for monitoring /tmp)<br />
pmt_mode = 5 # (do not use signal handler for monitoring /tmp & disable camd.socket)<br />
<br />
Default:<br />
pmt_mode = 0<br />
<br />
<br />
==== request_mode ====<br />
{{Optional}}<br />
CAID request mode: <br />
<br />
Beispiel:<br />
request_mode = 0 # versuche alle möglichen CAIDs nacheinander (default) <br />
request_mode = 1 # versuche alle CAIDs simultan<br />
<br />
<br />
==== listen_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP IP port für SAT IP clients. Die Filterung muss auf der Client-Seite erfolgen!<br />
<br />
0 = disabled (default)<br />
<br />
<br />
==== boxtype ====<br />
{{Mandatory}}<br />
Verwendete Box auf der DVB API aktiviert wurde.<br />
<br />
Beispiel:<br />
boxtype = ufs910<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt||qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
Hinweis:<br />
pc steht für generic pc support (laufend supported bei VDR mit vdr-plugin-dvbapi)<br />
<br /><br />
<br />
==== cw_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
cw_delay = in Millisekunden<br />
<br />
Delay beim Schreiben des CW. default = [blank] kein Delay<br />
<br />
<br />
==== delayer ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6808:05/14/2012</span><br />
<br />
delayer = Millisekunden<br />
<br />
Minimum der Zeit, um CW zu schreiben. default: 0<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
<br />
Öffnet die demux-device nach jedem Kanalwechsel neu, default = 0<br />
<br />
<br />
==== decodeforever ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = versuche dauernd auf allen CAIDs zu decodieren<br />
0 = default<br />
<br />
<br />
==== ecminfo_type ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10722:06/13/2015</span><br />
<br /><br />
Definiert die Syntax der Ausgabe in die ecm.info . <br />
<br />
ecminfo_type = 0|1|2|3|4|5 <br />
<br />
Die möglichen Werte bedeuten:<br /><br />
0 - normale oscam syntax<br />
1 - normale oscam syntax, aber die ECMTime wird in Millisekunden anstatt Sekunden angezeigt<br />
2 - wicardd (*1)<br />
3 - mgcamd<br />
4 - cccam<br />
5 - camd3<br />
<br />
(*1)Beispiel:<br /><br />
system: Nagra<br /><br />
caid: 0x1830<br /><br />
pid: 0x1CCE<br /><br />
prov: 000000<br /><br />
cw0: FF A3 7F F1 B8 29 E7 C8<br /><br />
cw1: CB E1 A3 D3 EF FE EF C0<br /><br />
Signature OK<br /><br />
source: ServerXY (cs378x at server:12345)<br /><br />
418 msec -- Sun Jun 14 18:55:37 2015<br /><br />
<br /><br />
<br />
==== read_sdt ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10766:06/15/15</span><br />
<br />
Durch diese Option kann Oscam (mittels Dvbapi) automatisch Kanalname und Providername in die oscam.srvid bzw oscam.srvid2 sowie oscam.provid eintragen. Dazu muss man mindestens 30 Sekunden auf einem Kanal verweilen. Dabei werden allerdings nur noch nicht vorhandene Namen hinzugefügt, bereits vorhandene Einträge in den Dateien werden nicht verändert. So behält man die volle Kontrolle über den Inhalt der Dateien.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = ausgeschaltet (default)<br />
1 = eingeschaltet, aber FTA-Kanäle nicht verarbeiten<br />
2 = eingeschaltet, auch FTA-Kanäle verarbeiten<br />
<br />
==== write_sdt_prov ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10841:06/27/15</span><br />
<br />
Mit dieser Option kann man einstellen, ob die Providernamen zusätzlich in die oscam.srvid bzw oscam.srvid2 eingetragen werden sollen. Dies ist nicht unbedingt erforderlich, weil der Providername automatisch aus der oscam.provid ausgelesen wird. Für diese Option ist das Einschalten von read_sdt erforderlich.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = ausgeschaltet, Providernamen nicht in die oscam.srvid bzw oscam.srvid2 eintragen (default)<br />
1 = eingeschaltet, Providernamen eintragen<br />
<br />
=== '''Anticasc''' ===<br />
Abschnitt nur dann erforderlich, wenn Anticascading als Schutz vor unbefugtem Weiterreichen von Cardsharing angewendet werden soll.<br />
<br />
{{OSCamConfAnticascParameter}}<br />
<br />
<br />
==== enabled ====<br />
{{Mandatory}}<br />
Hiermit wird Anticascading eingeschaltet.<br />
enabled = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== numusers ====<br />
{{Optional}}<br />
Zahl der User, die je Account zugelassen sind.<br />
numusers = 1 # Es ist ein User je Account zugelassen<br />
= 0 # Anticascading ausgeschaltet (default)<br />
<br />
<br />
==== sampletime ====<br />
{{Optional}}<br />
Zeit in Minuten für das Sammeln der Anfragen<br />
sampletime = 5 # Zeitraum von 5 Minuten<br />
= # [blank] Default-Wert 2 Minuten<br />
<br />
<br />
==== samples ====<br />
{{Optional}}<br />
Zahl der Anfragen über dem Limit (mögliche Werte zwischen 2 und 10)<br />
samples = 7 # Limit bei 7 Anfragen<br />
= # [blank] Default-Wert 10 Anfragen<br />
<br />
<br />
==== penalty ====<br />
{{Optional}}<br />
Strafe für den Sünder<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
<br />
Die Strafe kann in der oscam.user überschrieben werden! <br />
<br />
'''Hinweis:''' Fake-CW`s schaden nicht nur demjenigen, dem sie schaden sollen, sondern allen anderen im Share, denn weder oscam noch cccam kann Fake-CW`s von realen CW`s unterscheiden. Wenn also ein Sharepartner von uns ein Fake-CW bekommt und der es dann für 7 Sekunden im cache hat, kann das durch cache2-Hits unbegrenzt an weitere Sharepartner gehen, auch trotz Einstellung von cccmaxhops = 0. Es haben dann unzählige User plötzlich für 7 Sekunden einen Freezer und keiner weiss, warum. Man schadet so also unbewusst allen Sharepartnern, auch denen, mit denen man nicht direkt shart!<br />
<br />
Beispiel<br />
penalty = 3 # Sende korrekte CWs zeitversetzt<br />
<br />
<br />
==== aclogfile ====<br />
{{Optional}}<br />
Dateiname für das AC-Log<br />
aclogfile =<br />
= # [blank] Kein Logfile (default)<br />
<br />
<br />
==== fakedelay ====<br />
{{Optional}}<br />
Fake-Verzögerung in Millisekunden (mögliche Werte zwischen 100 und 3000)<br />
<br />
Beispiel<br />
fakedelay = 500 # Verzögerung von 500 Millisekunden<br />
= # [blank] Default-Wert 1000 Millisekunden<br />
<br />
<br />
==== denysamples ====<br />
{{Optional}}<br />
Wieviel Samples sollen bestraft werden?<br />
<br />
Beispiel<br />
denysamples = 10 # Ab 10 Samples wird bestraft<br />
= # [blank] Default-Wert 8 Samples<br />
<br />
==== acosc_enabled ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
'''Vorbemerkung:'''<br />
mit den nachfolgenden acosc-Parametern wir ein Anticascading über das Zählen der SIDs ('''a'''nticascading '''o'''ver '''s'''id '''c'''ount) ermöglicht.<br />
<br />
acosc_enabled = 0|1<br />
1 = ermöglicht anticascading over SIDs count<br />
0 = default<br />
<br />
<br />
==== acosc_max_active_sids ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = Anzahl<br />
<br />
Maximum aktiver SIDs bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden!<br />
<br />
<br />
==== acosc_zap_limit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = Anzahl<br />
<br />
Zap-Limit bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
Strafe für den Sünder bei Anticascading over SIDs count:<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = Sekunden<br />
<br />
Dauer der Strafe bei Anticascading over SIDs count:<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
==== acosc_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_delay = Millisekunden<br />
<br />
Verzögerung bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.conf&diff=13523
OSCam/de/Config/oscam.conf
2020-02-24T17:05:19Z
<p>Felixka: /* ccc_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.conf''' ==<br />
Dies ist die Hauptkonfigurationsdatei für OSCam. Sie enhält globale Parameter z.B. für das Debuggen, Loggen und den Loadbalancer, sowie einzelne Sektionen für Sondereffekte wie z.B. den Monitor, das Web-Interface, die Protokolle, das DVBapi und das Anti-Cascading. Nur die Sektion [global] ist Pflichtbestandteil, alle übrigen Sektionen sind optional (also nur bei Bedarf) zu verwenden.<br />
<br />
<br />
=== '''Globale Parameter''' ===<br />
Folgende Parameter gibt es im [global] Abschnitt:<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Ist ein Parameter leer oder wird er nicht im Konfigurationsfile angeführt dann gelten die Default-Werte!<br />
<br />
<br />
==== nice ====<br />
{{Optional}}<br />
'''Systempriorität'''. OSCam benötigt fast keine CPU-Leistung. Wenn aber CPU-Leistung benötigt wird, sollte diese sofort zur Verfügung stehen. Werte von 20 bis -20 sind möglich, wobei 20 gering und -20 sehr hoch ist. Wird der Parameter auskommentiert(#), wird diese Funktion nicht ausgerufen. Das ist wichtig z.B. für die dbox 2[http://de.wikipedia.org/wiki/DBOX2], wenn die Fehlermeldung "''relocation error:setpriority''" erscheint. Vgl. [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Beispiel:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
<br />
===== pidfile =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8176/01/24/2013</span><br />
<br />
pidfile = filename, <br />
<br />
ändere den Namen für das pidfile und den Speicherort,<br />
mit [blank] none (default)erfolgt die Speicherung als oscam.pid in /tmp<br />
<br />
Beispiel:<br />
pidfile = /var/run/oscam.pid<br />
<br />
<br />
===== logfile =====<br />
{{Optional}}<br />
Mit diesem Parameter wird Name und Pfad und für das Logfile (mehrere sind nicht möglich) festgelegt, zusätzlich auch das Loggen in stdout oder syslog. Es ist auch möglich, das Loggen nur für stdout oder syslog festzulegen und somit keine Logdatei zu schreiben.<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
Möglichkeiten:<br />
logfile = /var/log/oscam.log # Datei oder Linuxdevice (z.B. /dev/tty)<br />
logfile = syslog # Die Ausgabe wird an den syslogd übergeben<br />
logfile = stdout # Bildschirmausgabe<br />
<br />
Beispiel:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format des logfile:<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timed out<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
<br />
===== ecmfmt =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8056:01/03/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
definiert ECM log format, default:c@p/i/s/l:h:Y:t <br />
<br />
mögliche Variablen: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and cccam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , diese ID wird durch die Tierbeschreibung aus der oscam.tiers (falls vorhanden) ersetzt<br />
w = CW<br />
y = Payload (kurz, 3 Bytes)<br />
Y = Payload (lang, 6 Bytes)<br />
<br />
benutze einen Wert als Prefix, um eine Variable mit diesem Wert zu verbergen<br />
<br />
Beispiel:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w <br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn10048:11/30/13/2013</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs werden eingefügt, wenn CWs nicht ein ungleiches oder gleiches Muster haben (default)<br />
1 = disabled<br />
<br />
<br />
===== loghistorysize =====<br />
{{Optional}}<br />
loghistorysize = bytes<br />
<br />
Größe der Log-Messages-History im WebIf oder Monitor in Bytes<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) # ist nur wirksam, wenn '''preferlocalcards = 1''' in der [global] section gesetzt ist, sonst unter stage 3!<br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
Beispiel:<br />
<br />
P/2/2/2 oder L/2/4/4<br />
<br />
<br />
===== maxlogsize =====<br />
{{Mandatory}}<br />
<br />
Hier kann die maximale Größe des Logfiles in KBytes festgelegt werde. Das ist besonders wichtig für Server mit nur geringem Speicherumfang (z.B. auf dbox2). Darum wird dringend empfohlen, bei solchen Servern diese Größe sorgfältig zu bestimmen. Nicht selten "platzt" ein System, weil die Logfiles unkontrolliert riesige Ausmaße angenommen haben!<br />
<br />
Beispiel<br />
maxlogsize = 20 # Logfile geht bis zu 20 KBytes<br />
= 0 # Logfile erhält '''unbegrenzte''' Größe<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile geht bis zu 10 KBytes (default)<br />
<br />
<br />
===== logduplicatelines =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8290/02/05/2013</span> <br />
<br />
logduplicatelines = 0|1<br />
<br />
= 1 schaltet das Schreiben von Duplikatzeilen im Logfile aus<br />
= 0 schaltet das Schreiben von Duplikatzeilen im Logfile ein = default<br />
<br />
<br />
===== disablelog =====<br />
{{Optional}}<br />
Schaltet Logfile<br />
1 = Ausschalter ein, also '''kein''' Log - puh ;-) -<br />
0 = Ausschalter aus, also '''ein''' Log<br />
<br />
Beispiel:<br />
disablelog = 1 # es wird '''kein''' Log erstellt<br />
<br />
Default:<br />
disablelog = 0 # es wird '''ein''' Log erstellt<br />
<br />
<br />
===== cwlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für CW-Logging eingestellt werden. Der Pfad ist relativ zum Workdirectory und muss existieren, sonst werden keine Logs erstellt und auch keine Fehler ausgegeben.<br />
<br />
CWs (control words) sind die Antworten der Karte mit der ein bestimmter Sender für einige Sekunden freigeschaltet wird bevor das nächste cw übertragen wird. Die cw Logdatei kann dazu verwendet werden, den Sender zeitversetzt zu entschlüsseln. Das wird auch "Offline Decoding" genannt. Siehe [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
OScam erstellt für jeden Sender und jeden Tag eine neue *.cwl Datei mit Datum, Service-ID und Sendername, z.B. 110808_I000B_Sky_Cinema_+1.cwl mit diesem Inhalt:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
Wenn mindestens ein User diesen Sender schaut, werden alle notwendigen CWs gespeichert.<br />
Bitte einen Speicherort mit genügend Platz angeben, da pro Tag und Sender einge 10KB an Daten anfallen. Empfehlenswert ist ein Skript, das die logfiles regelmässig verschiebt/löscht.<br />
<br />
Beispiel:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] kein Pfad für CW-Log, Logging abgeschaltet<br />
<br />
<br />
===== emmlogdir =====<br />
{{Optional}}<br />
Hier kann ein Pfad für EMM-Logging eingestellt werden. Welche EMMs mitgeloggt werden sollen, kann mit den "saveemm-*"-Parametern in der oscam.server detailliert eingestellt werden.<br />
<br />
Beispiel:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] Es wird der Config-Ordner verwendet<br />
<br />
<br />
===== usrfile =====<br />
{{Optional}}<br />
Festlegung des Namens eines Files für user logging.<br />
<br />
Das user logging file hat folgendes Format<br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Beispiel:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
<br />
===== disableuserfile =====<br />
{{Optional}}<br />
Jetzt wird es ganz wild: Auch wenn ein Logfile eingeschaltet ist (siehe logfile) kann hier das userfile ausgeschaltet werden.<br />
<br />
Beispiel:<br />
disableuserfile = 1 # es wird '''kein''' userfile erzeugt<br />
= 0 # es wird '''ein''' userfile erzeugt<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
<br />
===== usrfileflag =====<br />
{{Optional}}<br />
Einstellung des Logging-Modus<br />
0 = Es wird nur das Ein- und Ausloggen des Clients im Userfile geloggt<br />
1 = Jedes Zappen eines Clients wird im Userfile geloggt<br />
Default-Wert ist 0<br />
<br />
Beispiel:<br />
usrfileflag = 1 # Alles wird geloggt<br />
<br />
Default:<br />
usrfileflag = 0 # Nur Login und Logout wird geloggt<br />
<br />
<br />
===== saveinithistory =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn7128;07/02/2012</span><br />
<br />
Sicherung der Reader-Init-History. Wird benötigt, um die Entitlements anzuzeigen.<br />
<br />
Beispiel:<br />
saveinithistory = 1 # Sicherung nach /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # Keine Sicherung<br />
<br />
<br />
===== disablemail =====<br />
{{Optional}}<br />
disablemail = 0|1<br />
<br />
Schaltet das Speichern von NDS Videoguard MailMessages des Providers aus. Default: 1 (disabled)<br />
<br />
<br />
===== mailfile =====<br />
{{Optional}}<br />
mailfile = file<br />
<br />
Legt das File fest, in dem NDS Videoguard MailMessages des Providers gespeichert werden sollen.<br />
<br />
Default: [blank] kein File.<br />
<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
Delay in Millisekunden für eine Anfrage an cache exchange mode 1 reader, default: kein delay<br />
<br />
<br />
==== reader ====<br />
===== enableled =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
<br />
===== serialreadertimeout =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8541:03/13/2013</span><br />
<br />
'''Nur wenn Serialreader benutzt wird'''<br />
Timeout in Millisekunden für Serialreader<br />
<br />
Beispiel:<br />
serialreadertimeout = 1200 # Timeout nach 1200 Millisekunden<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout nach 1500 Millisekunden<br />
<br />
<br />
===== waitforcards =====<br />
{{Optional}}<br />
Hier kann festgelegt werden, ob OSCam beim Start des Programms auf lokale Karten wartet, bevor die Netzwerkports geöffnet werden.<br />
<br />
Beispiel:<br />
waitforcards = 0 # Nicht Warten<br />
<br />
Default:<br />
waitforcards = 1 # Warten<br />
<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional}}<br />
waitforcards_extra_delay = Millisekunden<br />
<br />
Zusätzliche Verzögerung in Millisekunden nach Warten auf lokale SCs während des Starts vor dem Öffnen von Netzwerk-Ports<br />
<br />
default = 500<br />
<br />
<br />
===== preferlocalcards =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9605:03/29/2014</span><br />
<br />
Der Parameter legt fest, welche Quelle zuerst für die Dekodierung verwendet werden sollen.<br />
<br />
Beispiel:<br />
preferlocalcards = 0 # lokale Karten werden wie remote Reader behandelt<br />
<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
preferlocalcards = 2 # Lokale Karten werden dem CacheEX vorgezogen<br />
<br />
Default:<br />
preferlocalcards = 1 # CacheEX Quellen werden vor lokalen Karten bevorzugt<br />
<br />
<br />
===== readerrestartseconds =====<br />
{{Optional}}<br />
Festlegung einer Wartezeit in Sekunden zwischen Restarts von Readern.<br />
<br />
Beispiel:<br />
readerrestartseconds = 10 # Wartezeit 10 Sekunden<br />
= 0 # '''keine Readerrestarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # Wartezeit 5 Sekunden<br />
<br />
<br />
===== block_same_ip =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_ip = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit derselben IP-Addresse zurück, default = 1<br />
0 = nicht zurückweisen<br />
<br />
<br />
===== block_same_name =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7215/07/27/2012</span> <br />
<br />
block_same_name = 0|1<br />
<br />
1 = weise ECM-Schleifen vom Client zum Reader mit demselben Namen zurück, default = 1<br />
0 = Nicht zurückweisen<br />
<br />
<br />
==== cache ====<br />
===== cachedelay =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
<br />
===== max_cache_time =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clienten-Anfrage im cache verbleiben. Die zeit muss 2 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
===== max_cache_count =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = Anzahl, default 1000<br />
<br />
Maximale Zahl von CWs im cache<br />
<br />
<br />
===== cacheexwaittime =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
Maximale Wartezeit für einen Cache-Zugriff in Millisekunden für cacheex = 1 Reader.<br />
50 Millisekunden = default<br />
<br />
<br />
===== cacheexenablestats =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== client ====<br />
===== clienttimeout =====<br />
{{Optional}}<br />
<br />
Maximale Zeit in Millisekunden, bevor ein Client ein Timeout erhält.<br />
<br />
Beispiele:<br />
clienttimeout = 10000 # nach 10 Sekunden erfolgt ein Timeout<br />
clienttimeout = 10 # hier erfolgt aber ein Timeout bereits nach 10 Millisekunden, s. Hinweis unten!<br />
clienttimeout = 8 # der Timeout erfolgt nach 8000 Millisekunden (= 8 Sekunden), s. Hinweis<br />
Default:<br />
clienttimeout = 5000 # nach 5000 ms (=5 Sekunden) erfolgt ein Timeout<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bei Werten < 10 (also 1 bis 9) werden diese mit Eintausend multipliziert, aus "5" wird also 5000 ms. Eine eingetragene "10" bleibt aber bei zehn Millisekunden!<br />
<br />
===== clientmaxidle =====<br />
{{Optional}}<br />
Begrenzt die Leerlaufzeit eines Clienten in '''Sekunden''' bevor er vom Traffic getrennt wird.<br />
<br />
Beispiel:<br />
clientmaxidle = 200 # Trennung nach 200 Sekunden<br />
= 0 # Begrenzung ist ausgeschaltet, keine Trennung vom Traffic beim Leerlauf!<br />
<br />
Default:<br />
clientmaxidle = 120 # Trennung nach 120 Sekunden<br />
<br />
<br />
===== suppresscmd08 =====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
suppresscmd08 = 0 # Mitteilung an Clienten mit den Protokollen camd 3.5x, 3.57x und 3.78x, keine neuen Anfragen wegen <br />
zurückgewiesener Kombination aus CAID, SID und Provider-ID zu schicken (default)<br />
= 1 # Anfragen sollen weiterhin geschickt werden<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
<br />
==== fallbacktimeout ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Bei mehreren Readern (Siehe Abschnitt [reader] in oscam.server) kann ein Reader bestimmt werden, auf den z.B. bei einer Störung der übrigen Reader der traffic zurück fällt.<br />
<br />
Maximale Wartezeit des [[Cardserver]]s in Millisekunden auf primäre [[Reader]], bevor der/die [[Fallback]]-Reader (falls vorhanden!) befragt werden.<br />
<br />
Beispiel:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Der Wert muss größer dem Wert von "serialreadertimeout" gewählt werden, ansonsten werden die Standardwerte verwendet.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = Millisekunden<br />
<br />
Wartezeit in Millisekunden, bevor der für eine CAID reservierte [[Reader]] befragt wird.<br />
<br />
Default = 2500<br />
<br />
<br />
==== sleep ====<br />
{{Optional}}<br />
Alle User nach "n" Minuten "inaktivieren", wenn diese den Sender nicht innerhalb der eingestellten Zeit wechseln. Diese Einstellung kann auch für jeden User separat vorgenommen werden: [[OSCam/de/Config/oscam.user#sleep]]<br />
<br />
Beispiel:<br />
sleep = 240 # inaktiv nach 4 Stunden<br />
<br />
Default:<br />
sleep = # [blank]<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam hört auf ALLE IP Adressen.<br />
<br />
<br />
==== bindwait ====<br />
{{Optional}}<br />
Maximale Zeit in Sekunden, die der [[Cardreader]] beim Start wartet, bis er den jeweiligen Netzwerk-Port in Zugriff bekommt. Falls der OSCam innerhalb dieser Zeit den Port nicht binden kann, terminiert er mit "Bind Request failed". Ursachen dafür sind<br />
* Doppelbelegung von Ports<br />
* Ein vormals abgestürzter OSCam der die Ports nicht wieder freigegeben hat<br />
* OSCam wurde mehrmals gleichzeitig gestartet<br />
<br />
Beispiel:<br />
bindwait = 20 # Wartezeit 20 Sekunden<br />
<br />
Default:<br />
bindwait = 120 # Wartezeit 120 Sekunden<br />
<br />
<br />
==== netprio ====<br />
{{Optional}}<br />
Hier kann die Priorität des Cardservers im Netzwerk festgelegt werden<br />
<br />
Beispiel:<br />
netprio = 1 # Prioritätsstufe 1<br />
<br />
Default:<br />
netprio = 0 # Systembedingte Priorität<br />
<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional}}<br />
Art der DNS-Auflösung. Dies sind zwei verschiedene libc-Aufrufe für die Namensauflösung, weil einige ältere Systeme Probleme mit der moderneren Implementierung ''getadressinfo'' haben bzw. diese Funktion aus ihren Images gestrippt wurden (zB die alte dBox2). Außerdem ist ''getadressinfo'' threadsafe, während ''gethostbyname'' es nicht ist und deshalb locks drumherum im Code benötigt. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Beispiel:<br />
resolvegethostbyname = 1 # Name wird mittels ''gethostbyname'' aufgelöst<br />
<br />
Default:<br />
resolvegethostbyname = 0 # ''getadressinfo'' wird benutzt<br />
<br />
<br />
====failbancount====<br />
{{Optional}}<br />
Failbancount = Anzahl der erlaubten Fehlversuche mit falschen Zugangsdaten. <br />
= 0 (default) IP wird sofort beim ersten Versuch mit unbekannten Zugangsdaten gesperrt!<br />
<br />
Wenn innerhalb '''failbantime''' mehr als in '''failbancount''' erlaubte Versuche registriert wurden, wird die IP für die restliche failbantime gesperrt. Nach Ablauf von failbantime stehen wieder volle failbancount zur Verfügung. Failbancount ist also eine Lockerung der Regeln<br />
<br />
<br />
==== failbantime ====<br />
{{Optional}}<br />
Zeitspanne in Minuten, für die ein Client mit ungültigem Login-Versuch auf IP-Basis geblockt wird.<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP Adresse wird für 5 Minuten geblockt. Neue Loginversuche werden ignoriert auch wenn das Login OK wäre.<br />
# Es wird kein Clientthread erstellt.<br />
<br />
Default:<br />
failbantime = 0 # failban ist ausgeschaltet (default)<br />
<br />
<br />
==== dropdups ====<br />
{{Optional}}<br />
Möglichkeiten zur Duplizierung von Client-Verbindungen. Es wird damit die Reaktion auf den [[OSCam/de/Config/oscam.user#uniq|uniq]]-Parameter festgelegt.<br />
<br />
0 = Markierung des Clienten als Duplikat aber keine Trennung (default)<br />
1 = Abbrechen der Duplikat-Verbindung anstelle einer Markierung als Duplikat<br />
<br />
<br />
==== unlockparental ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7289:08/27/2012</span><br />
<br />
'''Nur Seca und Viaccess'''<br />
<br />
Option zum Ausschalten der Jugendschutzfunktion für Seca und Viaccess Pin Code Anfragen bei adult movies.<br />
Bei Viaccess z.B. für die Redlight Elite HD Smartcard. Mit unlockparental = 0 bleibt Dorcel Dunkel mit 1 wirds hell!<br />
<br />
Beispiel:<br />
unlockparental = 1 # Jugendschutzfunktion ausgeschaltet<br />
<br />
Default:<br />
unlockparental = 0 # Jugendschutzfunktion von Seca und Viaccess eingeschaltet<br />
<br />
<br />
==== double_check ====<br />
{{Optional}}<br />
'''Nur wenn CW double check ausgewählt ist!'''<br />
<br />
ECM wird zu 2 oder mehr Readern mit der selben SC gesandt und die CW's werden gegeneinander verifiziert. lb_nbes_reader muss auf 2 oder höher gesetzt werden.<br />
<br />
Beispiel:<br />
double_check =<br />
<br />
Default:<br />
double_check = 0<br />
<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|erste 2 digits von CAID1],[CAID2|erste 2 digits von CAID2],... = [blank] keine [default]<br />
<br />
ECM wird an 2 oder mehr Reader mit der gleichen SC gesendet und die CW's werden gegen andere definierte CAIDs oder die ersten 2 bytes der CAIDs verifiziert. lb_nbest_readers muss auf 2 oder höher gesetzt sein!<br />
<br />
<br />
==== Loadbalancer ====<br />
===== lb_mode =====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Wenn hier loadbalancing aktiviert wird, dann sind die in oscam.server bei services stehenden Besonderheiten zu beachten. Siehe [[streamboard:wiki/OSCam/de/Config/oscam.server#services|Services]]!<br />
<br />
Loadbalance Mode<br />
<br />
Wenn man zwei oder mehrere gleiche Karten hat (egal ob lokal oder als Proxie), kann man die Last auf diese Karten gleichmäßig verteilen (balancieren).<br />
<br />
Beispiel:<br />
lb_mode = 0 (deaktiviert) (default)<br />
lb_mode = 1 (schnellster Reader zuerst)<br />
lb_mode = 2 (Reader der am längsten nicht geantwortet hat wird genommen)<br />
lb_mode = 3 (Reader mit der geringsten Auslastung wird verwendet)<br />
lb_mode = 10(LB ist ausgeschaltet, Senderstatistik wird trotzdem erstellt)<br />
<br />
Default:<br />
lb_mode = 0 # deaktiviert<br />
<br />
<br />
===== lb_save =====<br />
{{Optional}}<br />
Speichert die Loadbalance Statistik, damit sie auch nach einem Neustart erhalten bleibt.<br />
Um die CPU nicht zu sehr zu belasten, sollte hier ein Wert > 100 eingetragen werden.<br />
<br />
Beispiel:<br />
lb_save = 100 # Anzahl der ECM's nach der die Statistik gespeichert wird<br />
<br />
Default:<br />
lb_save = 0 # Statistik wird nicht gespeichert<br />
<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional}}<br />
Anzahl der Reader, die für die ECM anfragen.<br />
<br />
Beispiel:<br />
lb_nbest_readers = 2 # Anfragen gehen immer an zwei Reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # Anfrage geht nur an einen Reader<br />
<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional}}<br />
Anzahl der Fallback Reader für den Lastenausgleich.<br />
<br />
Beispiel:<br />
lb_nfb_readers = 2 # Zwei Fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1<br />
<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mod<br />
= 0 # Standardverfahren zum (späten) Wiederöffnen blockierender Reader (default)<br />
= 1 # Schnelles Wiederöffnen blockierender Reader<br />
<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5893:08/19/2011</span><br />
<br />
Anzahl der Reader je CAIDs für das Loadbalancing, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Default:<br />
lb_nbest_percaid = 0<br />
<br />
Beispiel:<br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wird so lange blockiert, bis die Statistik aufgeräumt ist<br />
1 = default<br />
<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = öffne alle gestoppten Reader sofort, wenn kein funktionierender Reader gefunden wird<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional}}<br />
Mindestanzahl der ECM's, die für die Auswertung genommen werden.<br />
<br />
Beispiel:<br />
lb_min_ecmcount =<br />
<br />
Default:<br />
lb_min_ecmcount = 5<br />
<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional}}<br />
Maximale Anzahl der ECM's, bevor der Loadbalancer zurückgesetzt wird.<br />
<br />
Beispiel:<br />
lb_max_ecmcount =<br />
<br />
Default:<br />
lb_max_ecmcount = 500<br />
<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional}}<br />
Zeitspanne in Sekunden zwischen neuem Verbindungsversuch zu verlorengegangenen readern/CAIDs/providers/services<br />
<br />
Beispiel:<br />
lb_reopen_seconds = 500 # Nach 500 Sekunden neuer Verbindungsversuch<br />
<br />
Default:<br />
lb_reopen_seconds = 900<br />
<br />
<br />
===== lb_retrylimit =====<br />
{{Optional}}<br />
Verbindungsversuch zum nächsten reader '''nur wenn''' die Antwortzeit höher, als hier festgelegt in '''Millisekunden'''.<br />
<br />
Beispiel:<br />
lb_retrylimit = 500 # Verbindungsversuch zum nächsten reader nur, wenn die Antwortzeit höher als 500 ms ist.<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
<br />
===== lb_savepath ===== <br />
{{Optional}}<br />
Dateiname für die Sicherung der Loadbalancing Statistiken<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional}}<br />
Zeit in Stunden, nach der die Statistiksätze gelöscht werden sollen<br />
<br />
default = 336<br />
<br />
<br />
===== lb_use_locking =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6166:12/28/2011</span><br />
<br />
Unterdrückt parallele und identische ECM-Anfragen<br />
<br />
1 = ein<br />
0 = aus # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* Man sollte diese Option nur anschalten wenn:<br />
** Langsames system<br />
** Hohe Last<br />
**Gleiche ECM Anfragen nicht aus dem Cache kommen, sondern weiter Reader angefragt werden<br />
<br />
* Vorteile aktiviert:<br />
** Durch die Synchronisierung wird ein ECM Request nach dem anderen durchgeführt, die Ermittlung von Cache oder Request und Zuordnung der Reader über den Loadbalancer ist immer erfolgreich<br />
<br />
* Nachteile aktiviert:<br />
** Die Synchronisierung verhindert Multithreading und es kommt eventuell zu höheren Antwortzeiten<br />
<br />
* Vorteile NICHT aktiviert:<br />
** Schnellere Durchlaufzeiten für ECM requests<br />
<br />
* Nachteile NICHT aktiviert:<br />
** Eventuell doppelte (bzw n-fache) ECM requests an die Reader möglich<br />
<br/><br />
<br />
<br />
===== lb_retrylimits =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,CAID2:time2]...<br />
<br />
Begrenzung der Zeit für einen retry des loadbalancing eines CAID in Millisekunden, wildcard CAIDs mit two-digit CAIDs möglich, <br />
<br />
default: [blank]<br />
<br />
Beispiel:<br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
Ignoriere die Providerinformations-CAIDs, um die statistischen Daten zu reduzieren, wildcard CAIDs mit 2-digit CAIDs sind möglich<br />
<br />
Beispiel:<br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx und 34xx)<br />
<br />
default = [blank]<br />
<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # ermöglicht ein automatisches timeout auf der Basis von Statistiken des Loadbalancers<br />
= 0 # default<br />
<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = Prozent<br />
<br />
Prozentwert, mit dem die Timeout-Zeit beaufschlagt wird<br />
default = 30<br />
<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = Millisekunden<br />
<br />
Minimale Zeit in Millisekunden, die zur Timeout-Zeit hinzuaddiert wird<br />
default = 300<br />
<br />
<br />
===== lb_max_readers =====<br />
{{Optional}}<br />
lb_max_readers = limit (Zahl)<br />
<br />
beschränkt die Zahl der Reader während der Lernphase des Loadbalancing<br />
<br />
0 = unbegrenzt (default)<br />
x = beschränkt auf ein Limit von x (Zahl)<br />
<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional}}<br />
lb_auto_betatunnel = 0|1<br />
<br />
Ermöglicht automatisches Betatunneling für Betacrypt (CAIDs 1801, 1833, 1834 und 1835), wenn Loadbalancing verwendet wird<br />
lb_auto_betatunnel = 0 # ausgeschaltet<br />
= 1 # eingeschaltet (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Eintragungen für Betatunnel in oscam.user werden bevorzugt. Siehe [[streamboard:wiki/index.php/OSCam/de/Config/oscam.user#betatunnel|Betatunnel]]<br />
<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
setzt den Mode für das automatische Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only)<br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = Auswahl (Zahl)<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = immer Betacrypt<br />
105 = wählt einen Mittelwert<br />
200 = immer Nagravision<br />
<br />
<br />
=== '''Monitor''' ===<br />
Hier sind nur dann Eintragungen erforderlich, wenn ein Monitor benutzt wird!<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
UDP-Port für den Monitor<br />
port = 0 # Kein Monitor<br />
= # [blank] Portnummer Monitor ausgewählt<br />
<br />
Beispiel:<br />
port = 24480 # Monitor eingeschaltet mit Port 24480<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Service mit einer bestimmten IP-Adresse verbinden<br />
serverip = # IP-Adresse<br />
= # [blank] alle IP's (default)<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Unverschlüsselte Monitorverbindungen.<br />
<br />
Möglich<br />
* eine oder mehrere IP-Einzeladressen<br />
* eine oder mehrere IP-Bereiche<br />
* eine Mischung von IP-Einzeladressen oder IP-Bereichen<br />
<br />
Beispiel<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 und IP-Bereich 192.168.0.0 bis 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] keine unverschlüsselte Monitorverbindung.<br />
<br />
<br />
==== aulow ====<br />
{{Optional}}<br />
Zeitraum in Minuten, in dem keine EMM erscheinen, so dass der Client von "active" auf "on" gesetzt wird.<br />
<br />
Beispiel<br />
aulow = 30 # Nach 30 Minuten ohne EMM wird der Status von "active" auf "on" gesetzt (default).<br />
<br />
<br />
==== monlevel ====<br />
{{Optional}}<br />
Monitor-Level<br />
0 = Kein Zugriff auf Monitor (default)<br />
1 = Nur Server und eigene Prozeduren<br />
2 = Alle Prozeduren, aber nur ansehen<br />
3 = Alle Prozeduren, reload von oscam.user möglich<br />
4 = Unbeschränkter Zugriff<br />
<br />
Beispiel<br />
monlevel = 4 # Kompletter Zugriff<br />
<br />
Monlevel kann durch Eintragungen in oscam.user überschrieben werden!<br />
<br />
<br />
==== hideclient_to ====<br />
{{Optional}}<br />
Zeitspanne in Sekunden für das Ausblenden von Clients, die keine Anfragen senden. Siehe auch Parameter '''httphideidleclienst''' in Abschnitt [webif].<br />
hideclient_to = 40 # Clienten werden nach 40 Sekunden ohne Anfrage ausgeblendet<br />
= 0 # Keine Ausblendung von Clienten im Leerlauf<br />
<br />
<br />
==== appendchaninfo ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8546:03/13/2013</span><br />
<br />
Fügt die Channel-Info aus der oscam.services der Log-Meldung hinzu. Bei Verwendung von Monitor und Webinterface ist dies eine sehr nützliche Routine!<br />
appendchaninfo = 1 # Die Channel-Info wird hinzugefügt<br />
= 0 # Keine Channel-Info (default)<br />
<br />
<br />
=== '''lcd''' ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
<br />
==== lcd_outputpath ====<br />
{{Optional}}<br />
Hier kann ein Pfad für den LCD-Output eingestellt werden<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
<br />
==== lcd_hideidle ====<br />
{{Optional}}<br />
Verbergen eines Readers im LCD-Output während des Leerlaufs<br />
<br />
lcd_hideidle = 1 # Verbergen, wenn der Leerlauf länger als 20 Sekunden dauert<br />
= 0 # default<br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional}}<br />
LCD-Refresh-Interval in Sekunden (Minimum 5 Sekunden)<br />
<br />
Default:<br />
lcd-writeinterval = [blank] 10 Sekunden<br />
<br />
<br />
=== '''WebIf''' ===<br />
Eintragungen sind nur dann erforderlich, wenn das Web-Interface (by Alno) als Modul ausgewählt wurde.<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
<br />
==== Dateiformat zum Senden von EMMs via Webinterface ====<br />
(von Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' <br />
<br />
* Die Datei muß im TXT Format sein.<br />
* Jedes PRE-CAM EMM muss in einer eigenen Zeile vorliegen.<br />
* Die EMMs müssen im HEX Format vorliegen.<br />
** Beispiel: AABBCCDD...<br />
* Leerzeichen und Tabs zwischen den bytes sind erlaubt:<br />
** AA BB CC DD...<br />
* Groß- und/oder Kleinschreibung oder gemischte Schreibweise für jeden HEX-Wert sind erlaubt:<br />
** AA aa Aa aA...<br />
* Andere Zeichen oder Kommentare sind nicht erlaubt.<br />
<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
Port, auf dem das Webinterface hört.<br />
Standard ist Port 8888 wenn kein eintrag erfolgt<br />
<br />
httpport = 83 # Webinterface hört auf '''http-port 83'''<br />
= +83 # Webinterface hört auf '''https-port 83''' (SSL)<br />
0 # Webinterface ist ausgeschaltet<br />
<br />
<br />
==== httpcert ====<br />
{{Optional}}<br />
Datei für das SSL-Zertifikat<br />
httpcert = oscam.cert # (siehe dort!)<br />
= # [blank] es wird die Datei oscam.pem (embedded) verwendet<br />
<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
Beispiel<br />
httpforcesslv3 = 0 (default)<br />
= 1 benutze SSLv3<br />
<br />
<br />
==== httpuser ====<br />
{{Mandatory}}<br />
Name des Users für den Zugriffsschutz. Es wird zwar [blank] als Default-Wert angeboten. Davon wird aber dringend abgeraten; daher wird dieser Parameter hier als '''zwingend''' beschrieben.<br />
httpuser = # xyxyxy<br />
<br />
<br />
==== httppwd ====<br />
{{Mandatory}}<br />
Passwort für den Zugriffsschutz. Es gilt das gleiche wie für httpuser.<br />
httppwd = # 123456<br />
<br />
'''Die Parameter ''user'' und ''pwd'' werden beim Verbindungsaufbau zum Webinterface in einem Kontrollfenster abgefragt. Fehlen sie oder sind sie fehlerhaft, erfolgt die Meldung ''Forbidden'' und der Verbindungsaufbau wird abgebrochen!'''<br />
<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6825:05/15/2012</span><br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Füge den content des embedded CSS '''nicht vor''' dem content des user-css ein (default)<br />
1 # Embedded CSS wird '''vor''' dem externen CSS hinzugefügt(siehe nächsten Parameter: [[#httpcss|httpcss]])<br />
<br />
Dieser Parameter kann dazu benutzt werden, den embedded CSS mit custom styles zu überschreiben. Die laufenden CSS styles können hier angeschaut werden: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
<br />
==== httpcss ====<br />
{{Optional}}<br />
Für das Webinterface stehen verschiedene Styles in unterschiedlicher farblicher und graphischer Darstellung zur Verfügung. Der User kann die für ihn interessanten Style-Dateien (.css) speichern und je nach "Stimmung" verwenden. Hier wird der Pfad zu den Style-Dateien festgelegt.<br />
<br />
Beispiel<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] es wird der embedded Style verwendet (default)<br />
<br />
Styles werden hier veröffentlicht: [[streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
<br />
==== httptpl ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7083:06/25/12</span><br />
<br />
Pfad für externe templates und picons<br />
httptpl =<br />
= # [blank] Keine externen Templates<br />
<br />
Multiple simultane templates und picons können durch die Anlage von Unterordnern (mit max. 32 alphanumerischen Zeichen) zur Verfügung gestellt werden. Der Name des Unterordners korrespondiert mit dem Unterordner in der URL, default : [blank]<br />
<br />
Beispiele<br />
<br />
httptpl = /this/is/my/path <br />
<br />
Ordner mit multiplen templates: <br />
/this/is/my/path/template1 <br />
/this/is/my/path/template2 <br />
<br />
gültige URLs: <br />
http://host:port/template1 <br />
http://host:port/template2 <br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httpoverwritebakfile ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = überschreibe backup configurations files (*.bak)<br />
0 = default<br />
<br />
<br />
==== httplocale ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
hier kann ein "locale environment" gesetzt werden.<br />
<br />
default = [blank] kein environment<br />
<br />
Siehe auch hier:<br />
<br />
http://de.wikipedia.org/wiki/locale<br />
<br />
<br />
==== httpjscript ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
Path für oscam.js javascript, default : [blank]<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional}}<br />
Aktualisierungszeit in Sekunden, in der die (kompletten) Seiten des Webinterfaces aktualisiert werden<br />
httprefresh = 7 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httppollrefresh ====<br />
{{Optional}}<br />
<br />
Initialisierungszeit des Pollings und Aktualisierungszeit, in der diverse Daten des Webinterfaces neugeladen werden (Zeit kann auf den entsprechenden Seiten geändert werden)<br />
httppollrefresh = 60 # Status wird nach 7 Sekunden aktualisiert<br />
= # [blank|0] Es findes keine Aktualisierung statt<br />
<br />
<br />
==== httpshowpicons ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # zeige picons in userlist<br />
0 # default<br />
<br />
Mehr über Picons kann man hier finden [[streamboard:wiki/OSCam/de/Picons|Picons]]<br />
<br />
<br />
==== httphideidleclients ====<br />
{{Optional}}<br />
Dieser Parameter ermöglicht es, einen Clienten nach Ablauf der im Parameter '''hideclient_to''' im Abschnitt [monitor] festgelegten Leerlauf-Zeitspanne (siehe dort!) auszublenden.<br />
httphideidleclients = 1 # Ausblenden<br />
= 0 # Nicht ausblenden (default)<br />
<br />
==== httphidetype ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
Buchstabe der definiert, welcher type in der type-column auf der Statusseite des Webinterfaces versteckt werden soll. <br />
s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
<br />
==== httpscript ====<br />
{{Optional}}<br />
Pfad für Skripte, die vom Webinterface aus gestartet werden können<br />
httpscript = # Pfad<br />
= # [blank] kein Pfad<br />
<br />
<br />
==== httpallowed ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8842:08/17/2013</span><br />
<br />
Hier werden IP-Addressen, IP-Bereiche oder beides festgelegt, die auf das Webinterface zugreifen dürfen. Es wird zwar auch ein [blank] als Default-Wert angeboten, dessen Sinn sich aber nicht erschließt! Wenn das Webinterface benutzt werden soll, dann muss es auch die Möglichkeit geben, sich mit ihm zu verbinden. Daher wird dieser Parameter als '''zwingend''' dargestellt.<br />
<br />
Wenn ein localhost nach '''IPv6''' aufgelöst werden soll, muss die Zeile mit '''::1''' abgeschlossen werden!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
Beispiel<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host, sowie der gesamte Bereich 192.168.0 sind zugelassen <br />
und werden nach IPv6 aufgelöst<br />
'''Default Werte'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255,::1<br />
<br />
<br />
==== httpdyndns ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6558:03/21/12</span><br />
<br />
Zulassen von DYNDNS-Verbindungen durch das Webinterface.<br />
<br />
httpdyndns = hostname[,hostname][,hostname]<br />
<br />
Beispiel<br />
httpdyndns = host1.exemple.com, host2.exemple.com<br />
<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional}}<br />
Sicherung der Konfigurationsdateien<br />
httpsavefullcfg = 0 # alle nicht leeren Parameter,<br />
# alle nicht Default-Parameter,<br />
# alle Parameter, die nicht den gleichen Inhalt enthalten wie dieselben Parameter in [global] (default).<br />
1 # alle Parameter<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional}}<br />
<br />
Über das Webinterface können in bestimmtem Unfang Konfigurations-Dateien editiert und gesichert werden. Das ist für den Server-Admin, der sich nicht immer in der Nähe zur Konsole des Servers befindet, sehr vorteilhaft. Wenn aber weitere User oder andere Beteiligte ebenfalls Zugang zum Webinterface und damit Zugriff auf die Daten haben, kann das zu einem Problem werden. Die Möglichkeit des Editierens (Schreibens) kann daher mit diesem Parameter ausgeschaltet werden.<br />
httpreadonly = 1 # nur Lesezugriff möglich<br />
= 0 # alles ist möglich (default)<br />
<br />
<br />
==== httpiconpath ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn:9463/01/28/2014</span><br />
<br />
httpiconpath = path<br />
<br />
Pfad zur Picon-Datei, default [blank] none<br />
<br />
<br />
==== httphelplang ====<br />
{{Mandatory}}<br />
httphelplang = de|en|fr|it<br />
<br />
Auswahl der Sprache für die Kontexte<br />
<br />
de = deutsch<br />
en = englisch<br />
fr = französisch<br />
it = italienisch<br />
[blank] = englisch (default)<br />
<br />
<br />
==== httposcamlabel ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
Setzt ein individuelles label für den header des Webinterfaces, default: OSCam rXXXX<br />
<br />
<br />
=== '''Cache''' ===<br />
{{OSCamConfCacheParameter}}<br />
<br />
<br />
==== delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
Mindestzeit in Millisekunden, die ein Request brauchen muss. Hört sich zwar paradox an, betrifft aber das Problem, wenn die '''Antwort''' aus dem cache '''zu schnell''' an den Client übermittelt wird.<br />
<br />
Beispiel:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
<br />
==== max_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
max_time = Sekunden, default 15<br />
<br />
Maximale Zeit, die CWs nach der ersten Clientanfrage im Cache verbleiben. Die Zeit muß 3,5 Sekunden höher als der Parameter clienttimeout sein!<br />
<br />
<br />
==== max_hit_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8910:09/10/2013</span><br />
<br />
max_hit_time = in Sekunden<br />
<br />
Maximale Zeit, die Treffer für cache exchange im cache verbleiben müssen um wait_time zu evaluieren, default: 15<br />
<br />
<br />
==== wait_time ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Wartezeit und Dynamische Wartezeit in Millisekunden für cache exchange und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
<br />
= [blank] none (default)<br />
<br />
'''Info:'''<br />
awtime --> Zeit die bei jeder Anfrage gewartet wird (always wait time)<br />
dwtime --> Zeit die bei positivem Fund eines CWs im Cache gewartet wird (dynamic wait time)<br />
<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
<br />
Verwendungspraxis:<br />
wait_time = 098C:5:130,09C4:5:130,1702:5:1900,1830:5:490,1843:5:490,0D05:5,0B00:5<br />
<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional}}<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode (bestimmt die Verwenung des Parameters ''counter'')<br />
<br />
0 = Falls ''wait_time'' abgelaufen ist, sende das CW mit dem höchsten counter an die clients<br />
1 = Niemals ein CW (von cacheex) aus dem cache versenden, wenn der counter aus dem cacheex den in diesem Parameter <br />
gesetzten counter nicht erreicht. Falls ''wait_time'' erreicht ist, geht der request an normale reader. <br />
Nur wenn ein CW den gesetzten counter erreicht, wird es an die clients gesendet.<br />
Default = 0<br />
<br />
<br />
* counter (bestimmt den counter des CW, der mindestens erreicht werden muss, um versendet zu werden)<br />
<br />
Default = 1 (benutze das CW mit dem höchsten counter aus dem cache)<br />
<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = erlaube bad cw's von einem festgelegten fallback reader. Default = 0<br />
<br />
<br />
'''Info:'''<br />
<br />
Bei '''aktiviertem''' Parameter wird bei einem bad CW die Anfrage an den fixed Fallback weitergeleitet<br />
und somit ein freetzer meist verhindert.<br />
<br />
<br />
Siehe --> [[OSCam/de/Config/oscam.server#fallback|fallback]]<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = schaltet statistics für cache exchange mode ein<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Bitte Speicherverbrauch beachten!<br />
<br />
<br />
==== csp_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von CSP-Nodes hört<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
Lokale Bind-IP für csp_port (siehe oben)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 ausgeschaltet (default)<br />
= 1 eingeschaltet<br />
<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Für NDS Karten nur in einer light Version verfügbar''' <br />
<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID, für die der CW-Cycle-Check ermöglicht werden soll, [blank] = kein Check (Default)<br />
<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = Zahl<br />
<br />
Maximum von CW-Cycle-Entries in die Liste, default = 500, maximum = 4000<br />
<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = Minuten<br />
<br />
Minimalzeit, die ein erkannter Cycle in der Memory verbleiben soll, default = 15, maximum = 240<br />
<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = ungültige CW-Cycle kommen nur ins Log <br />
1 = ungültige CW-Cycle werden gedropped (default)<br />
<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, 1 = alte CW-Cycle werden gedropped, 0 = kein Dropping (default)<br />
<br />
<br />
==== cwcycle_sensitive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (oder mehr) gleiche bytes und drop neues CW<br />
3 = 3 (oder mehr) gleiche bytes und drop neues CW<br />
4 = 4 (oder mehr) gleiche bytes und drop neues CW<br />
<br />
--> Höherer Wert entspricht höherer Empfindlichkeit<br />
<br />
<br />
==== cwcycle_usecwcfromce ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = benutze CW Info aus cache exchange<br />
0 = default<br />
<br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
antworte, wenn das cache exchange timeout erreicht ist und keine normalen Reader zur Verfügung stehen, die ECM's senden:<br />
<br />
0 = sende sofort '''not found''' an den client (default)<br />
1 = warte auf eine Antwort für cache exchange bis der timeout für den client erreicht ist<br />
<br />
<br />
=== '''csp (UDP''') ===<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8358:02/16/2013 Siehe Section '''[cache]'''!</span><br />
<br />
Abschnitt nur dann erforderlich, wenn csp als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
<br />
==== port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
UDP-Port, der auf hereinkommenden traffic von csp-nodes hört<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6124:12/23/2011</span><br />
<br />
Local Bind IP für den oben genannten UDP-Port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== wait_time ====<br />
{{Mandatory}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET Siehe Section '''[cache]'''!</span><br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8060:01/04/13</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8077:01/06/13</span><br />
<br />
wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime,n<br />
= [blank] none (default)<br />
Beispiel:<br />
wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200<br />
Wartezeit in Millisekunden für cache exchange ('''nur mode 2&3''') und CSP, bevor ECMs an den Reader/Proxy gesendet werden.<br />
<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional}}<br />
csp_ecm_filter = [caid][&mask][@provid][$servid],n<br />
<br />
Filter für hereinkommende ECM beim Cardserverproxy, default (kein Filter)<br />
<br />
<br />
==== csp_allow_request ====<br />
{{Optional}}<br />
<br />
csp_allow_request = 0|1<br />
<br />
Erlaubt hereinkommende ECM-Anfragen vom Cardserverproxy, default = 1<br />
<br />
<br />
=== '''Camd 33 (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn camd33 als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd 33 Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen, auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== nocrypt ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein Adressbereich, der unverschlüsselt übertragen wird.<br />
<br />
Beispiel:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt =<br />
<br />
<br />
==== passive ====<br />
{{Optional}}<br />
Definition für aktiven oder passiven Client. Generell geht das Camd3.3x-Protokoll von einem aktiven Client aus. Es kann aber unter bestimmten Umständen bei manchen Clients (meistens plugin) zur Schwierigkeiten kommen. In diesem Fall<br />
<br />
Beispiel:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
<br />
==== key ====<br />
{{Optional}}<br />
<br />
Schlüssel, der für die Verschlüsselung verwendet wird. (128bit Verschlüsselung)<br />
<br />
Beispiel:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key =<br />
<br />
<br />
=== '''cs357x (UDP)''' ===<br />
Abschnitt nur dann erforderlich, wenn cs357x als Client Protokoll verwendet wird.<br />
Dieses Protokoll verschlüsselt grundsätzlich und bildet den Schlüssel aus dem Benutzernamen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:'''<br />
'''cs357x''' wurde auch als '''camd35''' bezeichnet. Beide Bezeichnungen meinen das gleiche Protokoll mit den gleichen Funktionsweisen und Parametern. Künftig wird zur Vermeidung von Irritationen '''nur noch cs357x''' verwendet.<br />
<br />
Eine genauere Erklärung für UDP findet Ihr hier [http://de.wikipedia.org/wiki/User_Datagram_Protocol]<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus cs357x Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein, dass OSCam nur antwortet, wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs357x -clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Tread]]<br />
<br />
<br />
=== '''cs378x''' (TCP) ===<br />
Abschnitt nur dann erforderlich, wenn cs378x als Client Protokoll notwendig ist.<br />
<br />
Eine ausführliche Erklärung von TCP findet Ihr hier [http://de.wikipedia.org/wiki/Transmission_Control_Protocol]<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Camd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Bei einem Server mit mehreren Netzwerkkarten und daher mehreren unterschiedlichen IP Adressen kann es gewünscht sein das OSCam nur antwortet wenn die Anfrage auf einer betimmten IP Adresse kommt. Mit diesem Parameter kann man festlegen auf welche IP Adresse der OSCam Prozess "hört".<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
suppresscmd08 = 0|1<br />
<br />
0 = veranlasst cs3.78x-clients, nicht erneut nach der Kombination [rejected CAID, service ID, provider ID] anzufragen (default)<br />
1 = disabled<br />
<br />
Kann durch Eintrag in oscam.user überschrieben werden!<br />
<br />
Wer mehr darüber wissen will, kann hier nachlesen: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
<br />
=== '''Newcamd (TCP)''' ===<br />
Abschnitt nur dann erforgerlich, wenn newcamd als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
<br />
==== key ====<br />
{{Mandatory}}<br />
Schlüssel für die Newcamd Verbindung zum Client.<br />
<br />
Beispiel:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
Hier wird der Port festgelegt, von dem aus Newcamd Anfragen beantwortet werden. Dieser Port muss ggf. auch am Router geöffnet werden.<br />
<br />
Beispiel:<br />
port = 15000@1234:000000 # (CAID 1234 ist über Port 15000 erreichbar)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 ist über Port 15000 erreichbar CAID 5678 über Port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
Hat der Server mehrere IP Adressen werden nur Anfragen die an die konfigurierte IP gehen beantwortet.<br />
<br />
Beispiel:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
Eine bestimmte IP Adresse oder ein bestimmter IP Bereich der sich auf den Newcamd Server verbinden darf.<br />
<br />
Beispiel:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed =<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
Der Server versucht, die Newcamd Verbindung am leben zu halten.<br />
<br />
Beispiel:<br />
keepalive = 1 # (aktiviert)<br />
keepalive = 0 # (deaktiviert)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
<br />
==== mgclient ====<br />
{{Optional}}<br />
Aktiviert das Extendet Newcamd Protokol, um mehrer CAID's über einen Port zu schicken<br />
<br />
Beispiel:<br />
mgclient = 1 # (aktiviert)<br />
mgclient = 0 # (deaktiviert)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br />
=== '''scam''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9878:09/29/2014</span><br />
<br />
Abschnitt nur dann erforderlich, wenn scam als Client-Protocol verwendet wird.<br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
port = port<br />
<br />
UDP-Port für scam server, default = 0<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
=== '''Radegast''' ===<br />
Abschnitt nur dann erforderlich, wenn Radegast als Client-Protokoll notwendig ist.<br />
<br />
{{OSCamConfRadegastParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
TCP/IP-Port für Radegast-Clients. Mit dem Eintrag wird das Radegast-Protokoll enabled.<br />
port =<br />
= 0 (default)<br />
<br />
<br />
==== serverip ====<br />
{{Optional}}<br />
<br />
Bindet den Service an eine bestimmte IP-Adresse.<br />
<br />
Beispiel:<br />
serverip = 192.162.9.1<br />
= (blank) alle IP sind zugelassen!<br />
<br />
<br />
==== allowed ====<br />
{{Optional}}<br />
<br />
IP-Addresse, IP-Range oder beides, die verbinden dürfen<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Beispiel<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host und ganze Bereich 192.168.0 sind zugelassen<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
<br />
Username des Radegast-Client<br />
user = username<br />
<br />
<br />
=== '''Serial''' ===<br />
Abschnitt nur dann erforderlich, wenn eine serielle Reader-Schnittstelle notwendig ist.<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
<br />
==== device ====<br />
{{Optional}}<br />
<br />
Parameter der Device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = Name der Serial Device<br />
option = timeout = Millisekunden Timeout für die Verbindung default: 50<br />
= delay Millisekunden Zusätzliche Verzögerung zwischen 2 Characters<br />
<br />
Unterstützte Serial Devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
<br />
=== '''Cccam (TCP)''' ===<br />
Abschnitt nur dann erforderlich, wenn Cccam als Client Protokoll notwendig ist.<br />
<br />
{{OSCamConfCccamParameter}}<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6206:01/07/2012</span><br />
<br />
TCP/IP-Ports für CCcam-Clients. Mit dem Eintrag eines oder mehrerer Ports wird das CCcam-Protokoll enabled.<br />
<br />
port = 0|port[,port...]<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled<br />
<br />
<br />
==== version ====<br />
{{Optional}}<br />
Definiert die Version von CCcam, mindestens Version 2.0.11, Default-Wert = 0<br />
<nowiki><main version>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
version = 2.0.11<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
==== reshare ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Reshare-Level<br />
-1 = kein Resharing<br />
0 = nur Reshare für Direct-Peer<br />
1 = Reshare für Direct-Peer und den nächsten Level<br />
x = Reshare für Direct-Peer und die nächsten x Level (x steht für die Zahl der Level)<br />
<br />
Beispiel<br />
reshare = 1 Reshare nur für Direct-Peer und den nächsten Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
==== reshare_mode ====<br />
{{Optional}}<br />
Arten des reshare:<br />
0 = reader reshared nur empfangene SCs für CCcam-reader<br />
1 = reader reshared empfangene SCs (wie=0) und definierte services<br />
2 = reader reshared nur definierte reader-services als virtueller SC<br />
3 = reader reshared nur definierte user-services als virtueller SC<br />
<br />
<br />
==== ignorereshare ====<br />
{{Optional}}<br />
CCcam Reshare-Einstellungen<br />
0 = benutze die Reshare-Einstellungen des Servers (default)<br />
1 = benutze die Reshare-Einstellungen des Readers oder Users<br />
<br />
Beispiel<br />
ignorereshare = 1 Die Reshare-Einstellungen des Readers oder Users werden benutzt<br />
<br />
<br />
==== stealth ====<br />
{{Optional}}<br />
Versteckt aktive user und das extended OSCam-Protokoll. Schützt andere OSCam-user davor, den Server als OSCam-Server zu entdecken!<br />
stealth = 1 # Tarnung eingeschaltet<br />
= 0 # Tarnung aus (default)<br />
<br />
<br />
==== minimizecards ====<br />
{{Optional}}<br />
Modus der Verbindung von CCcam-Servern zu CCcam-Clienten<br />
0 = Keine Aggregation, nur Duplikate werden entfernt (default)<br />
1 = Basierend auf Minimum-Hop: zwei SC's mit unterschiedlichen hops werden zusammengefasst, neue SC's bekommen einen kleineren hop<br />
2 = Aggregation auf CAIDs basierend: alle SC's mit der gleichen CAID werden zusammengefasst, Provider wird entfernt<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional}}<br />
Interval in Sekunden zur Verteilung der share list updates an die Clienten.<br />
<br />
0 = Update basiert auf Server-Updates, Werte kleiner als 10 sind ungültig und werden auf 30 gesetzt.<br />
= [blank) 240 (default)<br />
<br />
<br />
==== keepconnected ====<br />
{{Optional}}<br />
CCcam Keepalive-Modus:<br />
0 = Trenne Client, wenn die maximale Leerlaufzeit (idletime) erreicht ist<br />
1 = Halte die Verbindung (default)<br />
<br />
<br />
==== recv_timeout ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7672:10/09/2012</span><br />
<br />
recv_timeout = Millisekunden<br />
<br />
hier kann ein network-timeout beim Empfang von Daten gesetzt werden<br />
default = 2000<br />
<br />
<br />
==== forward_origin_card ====<br />
{{Optional}}<br />
forward_origin_card = 0|1<br />
<br />
Weiterleitung des ECM-Requests an den reader, der diese Karte hat.<br /><br />
Loadbalancer und Caching werden dabei deaktiviert.<br />
<br />
1 = Weiterleitung eingeschaltet<br />
0 = Aus (default)<br />
<br />
<br />
==== nodeid ====<br />
{{Optional}}<br />
nodeid = ID<br />
<br />
setzt CCcam node ID in '''hex''', <br />
<br />
default:none<br />
<br />
Beispiel:<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br />
Wenn eine nodeid benutzt wird, dann wechselt der Server das Protokol von "cccam ext" zu "cccam".<br />
<br />
<br />
=== '''Pandora''' ===<br />
{{OSCamConfPandoraParameter}}<br />
==== pand_skip_send_dw ====<br />
pand_skip_send_dw = dummy<br />
<br />
==== pand_allowed ====<br />
pand_allowed = dummy<br />
<br />
==== pand_usr ====<br />
pand_user = dummy<br />
<br />
==== pand_pass ====<br />
pand_pass = dummy<br />
<br />
==== pand_ecm ====<br />
pand_ecm = dummy<br />
<br />
==== pand_port ====<br />
pand_port = dummy<br />
<br />
==== pand_srvid ====<br />
pand_srvid = dummy<br />
<br />
<br />
=== '''GBox''' ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
{{OScamConfGboxParameter}}<br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBox läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
===== my_password =====<br />
{{Mandatory}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9163:12/31/2013</span><br />
'''moved from oscam.server'''<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
Passwort = 4 hex bytes, 8 chara<br />
<br />
Mein Passwort<br />
<br />
Beispiel<br />
98AF3E25<br />
<br />
<br />
==== proxy_card ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy_Card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
proxy reader SmartCard(s), die mit gbox network reshared werden, default = none<br />
<br />
<br />
==== ccc_reshare ====<br />
{{Optional/en}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = cccam Karten können ins gbox Netzwerk transportiert werden , default = 0 (global setting)<br />
<br />
- note: Caid der Karten müssen in 'ccc_gbx_caid =' spezifiziert werden<br />
<br />
- Der Share Level für jeden peer wird spezifiziert in oscam.server [reader]-> cccam_reshare<br />
<br />
<br/><br />
<br />
==== hostname ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9494:02/04/2014</span><br />
<br />
hostname = eigene IP oder hostname<br />
<br />
<br />
==== port ====<br />
{{Mandatory}}<br />
<br />
port = port[,port]... udp ports, die die gbox überwacht<br />
<br />
==== my_vers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9645:04/09/2014</span><br />
<br />
my_vers = version<br />
<br />
hier kann das low byte (hex) der eigenen gbox version gesetzt werden<br />
<br />
default = 2A<br />
<br />
==== my_cpu_api ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9712:05/11/2014</span><br />
<br />
my-cpu_api = byte<br />
<br />
Setze CPU und API Byte in hexadecimal<br />
default = 40<br />
<br />
<br />
==== gbox_reconnect ====<br />
{{Optional}}<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min=60, max=300<br />
<br />
==== gsms_disable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9714:05/11/2014</span><br />
<br />
gsms_disable = 0|1<br />
<br />
schaltet gbox short message service (GSMS) aus, <br />
default = 1<br />
<br />
==== tmp_dir ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/2014</span><br />
<br />
tmp_dir = path<br />
<br />
tempory directory für gbox<br />
<br />
default = /tmp/.oscam<br />
<br />
<br />
=== '''DVBapi''' ===<br />
{{Optional}}<br />
Abschnitt nur dann erforderlich, wenn OScam auch als Client zum entschlüsseln eingesetzt werden soll.<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional}}<br />
DVBapi zum lokalen Entschlüsseln verwenden<br />
<br />
Beispiel:<br />
enabled = 0 # (deaktiviert)<br />
enabled = 1 # (aktiviert)<br />
<br />
Default:<br />
enabled = 0<br />
<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
Hier wird der User festgelegt, dieser sollte in der oscam.user angelegt sein.<br />
<br />
Beispiel:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
<br />
==== au ====<br />
{{Optional}}<br />
Autoupdate für DVB API aktivieren/deaktivieren.<br />
Abhängig vom verwendeten User aus der oscam.user und dessen au Einstellungen.<br />
<br />
Beispiel:<br />
au = 0 # AU deaktiviert (default)<br />
au = 1 # AU aktiviert<br />
<br />
<br />
==== pmt_mode ====<br />
{{Optional}}<br />
Beispiel:<br />
pmt_mode = 0 # (verwendet camd.socket und PMT Datei)<br />
pmt_mode = 1 # (deaktiviert PMT Datei)<br />
pmt_mode = 2 # (deaktiviert camd.socket)<br />
pmt_mode = 3 # (liest PMT nur beim Start ein)<br />
pmt_mode = 4 # (do not use signal handler for monitoring /tmp)<br />
pmt_mode = 5 # (do not use signal handler for monitoring /tmp & disable camd.socket)<br />
<br />
Default:<br />
pmt_mode = 0<br />
<br />
<br />
==== request_mode ====<br />
{{Optional}}<br />
CAID request mode: <br />
<br />
Beispiel:<br />
request_mode = 0 # versuche alle möglichen CAIDs nacheinander (default) <br />
request_mode = 1 # versuche alle CAIDs simultan<br />
<br />
<br />
==== listen_port ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP IP port für SAT IP clients. Die Filterung muss auf der Client-Seite erfolgen!<br />
<br />
0 = disabled (default)<br />
<br />
<br />
==== boxtype ====<br />
{{Mandatory}}<br />
Verwendete Box auf der DVB API aktiviert wurde.<br />
<br />
Beispiel:<br />
boxtype = ufs910<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt||qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
Hinweis:<br />
pc steht für generic pc support (laufend supported bei VDR mit vdr-plugin-dvbapi)<br />
<br /><br />
<br />
==== cw_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
cw_delay = in Millisekunden<br />
<br />
Delay beim Schreiben des CW. default = [blank] kein Delay<br />
<br />
<br />
==== delayer ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6808:05/14/2012</span><br />
<br />
delayer = Millisekunden<br />
<br />
Minimum der Zeit, um CW zu schreiben. default: 0<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
<br />
Öffnet die demux-device nach jedem Kanalwechsel neu, default = 0<br />
<br />
<br />
==== decodeforever ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = versuche dauernd auf allen CAIDs zu decodieren<br />
0 = default<br />
<br />
<br />
==== ecminfo_type ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10722:06/13/2015</span><br />
<br /><br />
Definiert die Syntax der Ausgabe in die ecm.info . <br />
<br />
ecminfo_type = 0|1|2|3|4|5 <br />
<br />
Die möglichen Werte bedeuten:<br /><br />
0 - normale oscam syntax<br />
1 - normale oscam syntax, aber die ECMTime wird in Millisekunden anstatt Sekunden angezeigt<br />
2 - wicardd (*1)<br />
3 - mgcamd<br />
4 - cccam<br />
5 - camd3<br />
<br />
(*1)Beispiel:<br /><br />
system: Nagra<br /><br />
caid: 0x1830<br /><br />
pid: 0x1CCE<br /><br />
prov: 000000<br /><br />
cw0: FF A3 7F F1 B8 29 E7 C8<br /><br />
cw1: CB E1 A3 D3 EF FE EF C0<br /><br />
Signature OK<br /><br />
source: ServerXY (cs378x at server:12345)<br /><br />
418 msec -- Sun Jun 14 18:55:37 2015<br /><br />
<br /><br />
<br />
==== read_sdt ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10766:06/15/15</span><br />
<br />
Durch diese Option kann Oscam (mittels Dvbapi) automatisch Kanalname und Providername in die oscam.srvid bzw oscam.srvid2 sowie oscam.provid eintragen. Dazu muss man mindestens 30 Sekunden auf einem Kanal verweilen. Dabei werden allerdings nur noch nicht vorhandene Namen hinzugefügt, bereits vorhandene Einträge in den Dateien werden nicht verändert. So behält man die volle Kontrolle über den Inhalt der Dateien.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = ausgeschaltet (default)<br />
1 = eingeschaltet, aber FTA-Kanäle nicht verarbeiten<br />
2 = eingeschaltet, auch FTA-Kanäle verarbeiten<br />
<br />
==== write_sdt_prov ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10841:06/27/15</span><br />
<br />
Mit dieser Option kann man einstellen, ob die Providernamen zusätzlich in die oscam.srvid bzw oscam.srvid2 eingetragen werden sollen. Dies ist nicht unbedingt erforderlich, weil der Providername automatisch aus der oscam.provid ausgelesen wird. Für diese Option ist das Einschalten von read_sdt erforderlich.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = ausgeschaltet, Providernamen nicht in die oscam.srvid bzw oscam.srvid2 eintragen (default)<br />
1 = eingeschaltet, Providernamen eintragen<br />
<br />
=== '''Anticasc''' ===<br />
Abschnitt nur dann erforderlich, wenn Anticascading als Schutz vor unbefugtem Weiterreichen von Cardsharing angewendet werden soll.<br />
<br />
{{OSCamConfAnticascParameter}}<br />
<br />
<br />
==== enabled ====<br />
{{Mandatory}}<br />
Hiermit wird Anticascading eingeschaltet.<br />
enabled = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== numusers ====<br />
{{Optional}}<br />
Zahl der User, die je Account zugelassen sind.<br />
numusers = 1 # Es ist ein User je Account zugelassen<br />
= 0 # Anticascading ausgeschaltet (default)<br />
<br />
<br />
==== sampletime ====<br />
{{Optional}}<br />
Zeit in Minuten für das Sammeln der Anfragen<br />
sampletime = 5 # Zeitraum von 5 Minuten<br />
= # [blank] Default-Wert 2 Minuten<br />
<br />
<br />
==== samples ====<br />
{{Optional}}<br />
Zahl der Anfragen über dem Limit (mögliche Werte zwischen 2 und 10)<br />
samples = 7 # Limit bei 7 Anfragen<br />
= # [blank] Default-Wert 10 Anfragen<br />
<br />
<br />
==== penalty ====<br />
{{Optional}}<br />
Strafe für den Sünder<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
<br />
Die Strafe kann in der oscam.user überschrieben werden! <br />
<br />
'''Hinweis:''' Fake-CW`s schaden nicht nur demjenigen, dem sie schaden sollen, sondern allen anderen im Share, denn weder oscam noch cccam kann Fake-CW`s von realen CW`s unterscheiden. Wenn also ein Sharepartner von uns ein Fake-CW bekommt und der es dann für 7 Sekunden im cache hat, kann das durch cache2-Hits unbegrenzt an weitere Sharepartner gehen, auch trotz Einstellung von cccmaxhops = 0. Es haben dann unzählige User plötzlich für 7 Sekunden einen Freezer und keiner weiss, warum. Man schadet so also unbewusst allen Sharepartnern, auch denen, mit denen man nicht direkt shart!<br />
<br />
Beispiel<br />
penalty = 3 # Sende korrekte CWs zeitversetzt<br />
<br />
<br />
==== aclogfile ====<br />
{{Optional}}<br />
Dateiname für das AC-Log<br />
aclogfile =<br />
= # [blank] Kein Logfile (default)<br />
<br />
<br />
==== fakedelay ====<br />
{{Optional}}<br />
Fake-Verzögerung in Millisekunden (mögliche Werte zwischen 100 und 3000)<br />
<br />
Beispiel<br />
fakedelay = 500 # Verzögerung von 500 Millisekunden<br />
= # [blank] Default-Wert 1000 Millisekunden<br />
<br />
<br />
==== denysamples ====<br />
{{Optional}}<br />
Wieviel Samples sollen bestraft werden?<br />
<br />
Beispiel<br />
denysamples = 10 # Ab 10 Samples wird bestraft<br />
= # [blank] Default-Wert 8 Samples<br />
<br />
==== acosc_enabled ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
'''Vorbemerkung:'''<br />
mit den nachfolgenden acosc-Parametern wir ein Anticascading über das Zählen der SIDs ('''a'''nticascading '''o'''ver '''s'''id '''c'''ount) ermöglicht.<br />
<br />
acosc_enabled = 0|1<br />
1 = ermöglicht anticascading over SIDs count<br />
0 = default<br />
<br />
<br />
==== acosc_max_active_sids ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = Anzahl<br />
<br />
Maximum aktiver SIDs bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden!<br />
<br />
<br />
==== acosc_zap_limit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = Anzahl<br />
<br />
Zap-Limit bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
Strafe für den Sünder bei Anticascading over SIDs count:<br />
0 = Es wird nur geloggt (default)<br />
1 = Es werden Fake-CW's gesendet<br />
2 = Der User wird vorübergehend getrennt<br />
3 = Sende korrekte CWs zeitversetzt. Der Versatz ist per fakedelay= (s.u.) einstellbar.<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden<br />
<br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = Sekunden<br />
<br />
Dauer der Strafe bei Anticascading over SIDs count:<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
==== acosc_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9761:06/05/14</span><br />
<br />
acosc_delay = Millisekunden<br />
<br />
Verzögerung bei Anticascading over SIDs count<br />
<br />
0 = unbegrenzt (default)<br />
kann für jeden User in der jeweiligen oscam.user überschrieben werden <br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.conf&diff=13522
OSCam/en/Config/oscam.conf
2020-02-24T15:04:33Z
<p>Felixka: /* ccc_gbx_caid */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
==oscam.conf==<br />
<br />
=== The [global] section ===<br />
<br />
The main configuration file for OSCam contains global parameters such as debugging, logging, monitor, protocols and anti-cascading. Sections in oscam.conf are nonrecurring. The [global] section is required. All other sections are optional.<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If a parameter is empty or is not listed in config-file, then apply the default values !<br />
<br />
==== nice ====<br />
{{Optional/en}}<br />
<br />
'''Systempriority'''<br />
<br />
OSCam requires almost no CPU-power. But if CPU-power is required, it should be available immediatly. Values between 20 and -20 are possible. 20 = low, -20 = very high. If this parameter is commented out (#), this function is not called. Important for example for dbox2[http://de.wikipedia.org/wiki/DBOX2], if the error messages "''relocation error:setpriority''". See [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Example:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
===== initial_debuglevel =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10705:06/11/15</span><br />
<br />
Set the debuglevel on startup.<br />
<br />
Example:<br />
initial_debuglevel = 8<br />
<br />
Default:<br />
initial_debuglevel = 0<br />
<br />
===== pidfile =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8176/01/24/2013</span><br />
<br />
pidfile = set pidfile, [blank] none (default)<br />
<br />
Change PID file name an path. If default = oscam.pid in /tmp<br />
<br />
Example:<br />
pidfile = /var/run/oscam.pid<br />
<br />
===== logfile =====<br />
{{optional/en}}<br />
<br />
Logging target<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
You can define a maximum of one filename (not more!) and additionally to log to stdout or syslog (you can also only log to stdout or syslog and omit the filename).<br />
<br />
Opportunities:<br />
<br />
logfile = /var/log/oscam.log # file or linux device (for example /dev/tty)<br />
logfile = syslog # log to syslogd <br />
logfile = stdout # showing the log on the console<br />
<br />
Example:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format logfile:<br />
CAID&ident/provider/length:checksum<br />
<br />
===== ecmfmt =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
define ECM log format, default:c&p/i/s/l:h <br />
<br />
possible variables: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and CCcam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , this ID will be replaced with the tier-description from oscam.tiers (if found)<br />
w = CW<br />
y = payload (short, 3 bytes)<br />
Y = payload (long, 6 bytes)<br />
<br />
<br />
use a value as prefix to hide variable with this value, control characters will be escaped by "\" <br />
<br />
example:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w HOP:j<br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn10048:11/30/2014</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs will be dropped, if CWs do not have an odd an even sample (default)<br />
1 = disabled<br />
<br />
===== loghistorysize =====<br />
{{optional/en}}<br />
<br />
loghistorysize = bytes<br />
<br />
size of log message history in web interface or monitor<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) #stage 2 is used only if '''preferlocalcards = 1''' was activated in [global] section. <br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
example<br />
<br />
P/2/2/2 or L/2/4/4<br />
<br />
===== maxlogsize =====<br />
{{required}}<br />
<br />
Here the maximum size of logfiles are set in KBytes. This is especially important for server with only a small amount of memory (dbox2). Therefore it is strongly recomended to determine carefully that size at such servers. Not infrequently a system "bursting" because the logfile uncontrolled large scale adopted!<br />
<br />
Example<br />
maxlogsize = 20 # Logfile reaches to 20 KBytes<br />
= 0 # Logfile '''unlimited'''<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile reaches to 10 KBytes (default)<br />
<br />
===== logduplicatelines =====<br />
{{optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8290/02/05/2013</span><br />
<br />
logduplicatelines = 0|1<br />
<br />
1 = disable detection of duplicate lines in log file<br />
0 = enable detection of duplicate lines in logfile = default<br />
<br />
===== disablelog =====<br />
{{optional/en}}<br />
<br />
switches logfile '''off'''<br />
1 = '''no log''' <br />
0 = '''log''' <br />
<br />
Example:<br />
disablelog = 1 # '''no''' log <br />
<br />
Default:<br />
disablelog = 0 # '''log'''<br />
<br />
===== cwlogdir =====<br />
{{Optional/en}}<br />
<br />
<br />
A path for cw logging can be configured here. The path is relative to the work directory and must exist. Otherwise no logs are created and no errors are reported. <br />
<br />
CWs (control words) are the answers of the card which decrypts a certain channel for some seconds before the next cw is transmitted. The CW log file can be used for delayed decoding of this channel. This is also called offline decoding. Watch this [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
Oscam creates a new *.cwl file for each channel and each day. The file name contains the date, service ID and service name, e.g. 110808_I000B_Sky_Cinema_+1.cwl with this contents:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
All cws are logged if at least one user watches the channel. Please choose a path with enough space, since per day and channel some 10KB of data are created. A script that moves/deletes the log files regularly is recommended.<br />
<br />
Example:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] no path for cw-log, logging disabled<br />
<br />
===== emmlogdir =====<br />
{{Optional/en}}<br />
<br />
Setting a path for emm-log. You can define with the "saveemm-*"-Parameters in oscam.server which EMMs should be logged.<br />
<br />
Example:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] the config folder will be used for emm logging<br />
<br />
===== usrfile =====<br />
{{Optional/en}}<br />
<br />
Set a name für userfile<br />
<br />
Format of the userfile: <br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Example:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
===== disableuserfile =====<br />
{{Optional/en}}<br />
<br />
Now it is crazy: Even if a logfile is switched on (see logfile), the userfile can be turned off!<br />
<br />
Example:<br />
disableuserfile = 1 # '''no''' userfile <br />
= 0 # '''userfile'''<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
===== usrfileflag =====<br />
{{Optional/en}}<br />
<br />
Setting the logging-modus<br />
0 = Only login and logout will be logged<br />
1 = Each zapping from client will be logged<br />
Default is 0<br />
<br />
Example:<br />
usrfileflag = 1 # All will be logged<br />
<br />
Default:<br />
usrfileflag = 0 # Only login und logout will be logged<br />
<br />
===== saveinithistory =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn7128:07/02/2012</span><br />
<br />
Save SC init history to /tmp/.oscam/reader<number>. Needed to show entitlements.<br />
<br />
Example:<br />
saveinithistory = 1 # save to /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # no save<br />
<br />
===== mailfile =====<br />
{{Optional/en}}<br />
<br />
mailfile = file<br />
<br />
define file saving NDS Videogard mail messages from provider. Default: [blank] none<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
delay in millisencons for asking cache exchange mode 1 readers, default: none<br />
<br />
===== disablemail =====<br />
{{Optional/en}}<br />
<br />
disablemail = 0|1<br />
<br />
disable saving NDS Videogard mail messages form provider. Default = 1 (disabled)<br />
<br />
===== sysloghost =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set remote syslog server will be activated. Messages will be sent to this IPv4 address. If not set remote syslog server not work.<br />
<br />
Example:<br />
sysloghost = 192.168.1.167<br />
<br />
===== syslogport =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set ''sysloghost'' remote syslog server will be activated. Messages will be sent to this port. If not set port 514 is used as default. <br />
<br />
Example:<br />
syslogport = 515<br />
<br />
Default:<br />
syslogport = 514<br />
<br />
==== Reader ====<br />
<br />
===== enableled =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
===== serialreadertimeout =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8541:03/13/2013</span><br />
<br />
'''Only using Serialreader!'''<br />
<br />
timeout for serial reader in milli-seconds<br />
<br />
Example:<br />
serialreadertimeout = 1200 # Timeout after 1200 milli-seconds<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout after 1500 milli-seconds<br />
<br />
===== waitforcards =====<br />
{{Optional/en}}<br />
<br />
wait for local SCs on startup before opening network ports<br />
<br />
Example:<br />
waitforcards = 0 # don't wait<br />
<br />
Default:<br />
waitforcards = 1 # wait<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional/en}}<br />
<br />
waitforcards_extra_delay = milli seconds<br />
<br />
additional delay in milli seconds after waiting for local SCs on startup before opening nework ports<br />
<br />
default = 500<br />
<br />
===== preferlocalcards =====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn9605:03/29/2014</span><br />
<br />
try decoding on local cards first<br />
<br />
Example:<br />
preferlocalcards = 0 # local cards are used like remote reader<br />
preferlocalcards = 1 # prefer CacheEx sources <br />
preferlocalcards = 2 # prefer local cards<br />
<br />
Default:<br />
preferlocalcards = 1 # prefer CacheEx sources<br />
<br />
===== readerrestartseconds =====<br />
{{Optional/en}}<br />
<br />
waiting time in seconds beetween restarts<br />
<br />
Example:<br />
readerrestartseconds = 10 # waiting time 10 seconds<br />
= 0 # '''no restarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # waiting time 5 seconds<br />
<br />
===== block_same_ip =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_ip = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same ip address, default = 1<br />
0 = no reject<br />
<br />
===== block_same_name =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_name = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same name, default = 1<br />
0 = no reject<br />
<br />
==== Cache ====<br />
<br />
===== cachedelay =====<br />
{{optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
===== max_cache_time =====<br />
<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
===== max_cache_count =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = count, default 1000<br />
<br />
maximum CWs in cache<br />
<br />
===== cacheexwaittime =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
maximum wait time for a cache entry in milli seconds, default:50 <br />
<br />
===== cacheexenablestats =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== Client ====<br />
<br />
===== clienttimeout =====<br />
{{Optional/en}}<br />
<br />
value in milli-seconds for client process to wait for key<br />
<br />
Examples:<br />
clienttimeout = 10000 # after 10 seconds timeout<br />
clienttimeout = 10 # timeout after 10 milli-seconds! (see Tip below)<br />
clienttimeout = 8 # timeout after 8000 milli-seconds (= 8 seconds), see Tip below<br />
Default:<br />
clienttimeout = 5000 # timeout after 5000 milli-seconds (=5 seconds)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Values < 10 (so 1 to 9) are multiplicated with 1000, so a "5" results in 5000 ms.<br />
<br />
===== clientmaxidle =====<br />
{{Optional/en}}<br />
<br />
value for client process being idle before disconnect in seconds<br />
<br />
Example:<br />
clientmaxidle = 200 # Disconnect after 200 seconds<br />
= 0 # idle disconnect disabled<br />
<br />
Default:<br />
clientmaxidle = 120 # Disconnect after 120 seconds<br />
<br />
===== suppresscmd08 =====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35[cs3.57x]-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
==== fallbacktimeout ====<br />
{{Depends/en}}<br />
<br />
At several readers (see Chapter [reader] in oscam.server) one reader can be defined to them, for example in case of failure of the other readers, the traffic falls back.<br />
Maximum waiting time of the [[Cardserver]]s in milliseconds for primary [[Reader]], before [[Fallback]]-Reader (if any!) are questioned.<br />
<br />
Example:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The value must be greater than the value in "serialreadertimeout", otherwise the default is used.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = milliseconds <br />
<br />
time falling back to CAID restricted fallback reader, default: 2500<br />
<br />
<br />
<br />
==== sleep ====<br />
{{Optional/en}}<br />
<br />
time waiting for inactive users in minues, can be overwritten per user in oscam.user<br />
<br />
Example:<br />
sleep = 5 # waiting time 5 minutes<br />
<br />
Default:<br />
sleep = # [blank] no waiting time<br />
<br />
==== serverip ====<br />
{{optional/en}}<br />
<br />
Bind service to specified IP-address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam listen to all IP's<br />
<br />
==== bindwait ====<br />
{{Optional/en}}<br />
<br />
value in seconds to wait for bind request to complete. If OSCam within this time can not bind, he finished with "Bind Request failed".<br />
<br />
Causes may include:<br />
* Double assignment of ports<br />
* "crashed" OSCam has not released the ports again<br />
* OSCam was started serveral times while<br />
<br />
Example:<br />
bindwait = 20 # waiting time 20 seconds<br />
<br />
Default:<br />
bindwait = 120 # waiting time 120 seconds<br />
<br />
==== netprio ====<br />
{{Optional/en}}<br />
<br />
network priority - This sets the value of SO_PRIORITY on network connections. Basically this leads to setting the TOS fields of the sent IP packages so that QoS can be better used.<br />
<br />
Beispiel:<br />
netprio = 1 # Priority 1<br />
<br />
Default:<br />
netprio = 0 # system given<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional/en}}<br />
<br />
set mode for DNS resolving: These are different libc calls to resolve dns names and some older systems have problems with the newer implementation ''getadressinfo'' (getadressinfo is also threadsafe whereas ''gethostbyname'' is not and thus it has some locks around) or have stripped them from their images (dbox2 was such a candidate I think) even though it is available at compile time. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Example:<br />
resolvegethostbyname = 1 # gethostbyname<br />
<br />
Default:<br />
resolvegethostbyname = 0 # adressinfo system given<br />
<br />
==== failbantime ====<br />
{{Optional/en}}<br />
<br />
time for IP based blocking for clients with an invalid login attempt in minutes<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP will be blocked for 5 minutes. New logins are denied.<br />
# no clientthread will be created.<br />
<br />
Default:<br />
failbantime = 0 # failban off (default)<br />
<br />
==== failbancount ====<br />
{{Optional/en}}<br />
<br />
Failbancount = Number of allowed failed attempts with incorrect data <br />
= 0 (default) IP is now blocked on the first try with incorrect data!<br />
<br />
If within '''failbantime''' more than in '''failbancount''' allowed trials to be registered, the IP for the remainder failbantime is locked. After a period of failbantime are again full failbancount available. Failbancount is thus a relaxation of rules!<br />
<br />
==== dropdups ====<br />
{{Optional/en}}<br />
<br />
mode for duplicate client connections<br />
<br />
0 = mark client as duplicate, but don't disconnect them (default)<br />
1 = drop duplicate connections instead of marking as duplicate<br />
<br />
==== unlockparental ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7289:08/27/2012</span><br />
<br />
'''Only Seca and Viaccess'''<br />
<br />
unlock parental mode option to disable pin code request for adult movie.<br />
In order to work properly, this option may required that you define the card PIN code in your card reader configuration.<br />
<br />
Example:<br />
unlockparental = 1 # parental lock mode disabled<br />
<br />
Default:<br />
unlockparental = 0 # parental lock mode enabled<br />
<br />
==== double_check ====<br />
{{Optional/en}}<br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other, lb_nbest_readers must be set to 2 or higher<br />
<br />
Example:<br />
double_check = 1 # on<br />
<br />
Default:<br />
double_check = 0 # off<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|first two digits of CAID1],[CAID2|first two digits of CAID2]... <br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other for defined CAID or first two bytes of CAID, lb_nbest_readers must be set to 2 or higher, default:none <br />
<br />
<br />
<br />
==== Loadbalancer ====<br />
<br />
===== lb_mode =====<br />
{{Optional/en}}<br />
<br />
'''loadbalance mode'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If load balancing is activated here, it may in oscam.server among services and ident are '''no entries'''!<br />
<br />
If there are 2 or more of the same SC, the load can be distributed evenly on the cards. For more see [[OSCam/en/Loadbalancing|Loadbalancing]]<br />
<br />
Example:<br />
lb_mode = 0 loadbalance disabled, ECMs go to all readers<br />
lb_mode = 1 fastest reader first, after 5 ECMs the reader with the fastest response time will be selected<br />
lb_mode = 2 oldest reader first, reader with the longest no answer<br />
lb_mode = 3 lowest usage level, the usage level will be calculated by the sum of 5 ECMS response times, the higher a reader is busy, the higher is usage level<br />
lb_mode = 10 LB is switched off, but statistics are build<br />
<br />
<br />
Default:<br />
lb_mode = 0 # disabled<br />
<br />
===== lb_save =====<br />
{{Optional/en}}<br />
<br />
Save autoloadbalance statistics (counts). To save CPU power a minimum counts of 100 is recommended.<br />
<br />
Example:<br />
lb_save = 100 # counts of ECM's after statistics are saved<br />
<br />
Default:<br />
lb_save = 0 # no svae<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional/en}}<br />
<br />
set count of best readers for loadbalancing.<br />
<br />
Example:<br />
lb_nbest_readers = 2 # requests always go to two reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # requests go to one reader<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional/en}}<br />
<br />
set count of fallback readers for loadbalancing<br />
<br />
Example:<br />
lb_nfb_readers = 2 # two fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1 # one fallbackreader<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mode:<br />
= 0 # standard late reopening of blocker readers (default)<br />
= 1 # fast reopening of blocker readers<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5893:08/19/2011</span><br />
<br />
Set count of best readers per CAIDs for loadbalancing, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
<br />
lb_nbest_percaid = # number<br />
= [blank] # none (default)<br />
<br />
example: <br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wiil be blocked until statistics has been cleaned<br />
1 = default<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = force reopening immidiatly all failing readers if no matching was found<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional/en}}<br />
<br />
minimal ECM count to evaluate loadbalancing values<br />
<br />
Example:<br />
lb_min_ecmcount = 2 # 2 counts<br />
<br />
Default:<br />
lb_min_ecmcount = 5 # 5 counts<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional/en}}<br />
<br />
Maximum ECM count before resetting loadbalancing values.<br />
<br />
Example:<br />
lb_max_ecmcount = 200 # 200 counts<br />
<br />
Default:<br />
lb_max_ecmcount = 500 # 500 counts<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional/en}}<br />
<br />
time in seconds between retrying failed readers/CAIDs/providers/services<br />
<br />
Example:<br />
lb_reopen_seconds = 500 # retry after 500 seconds<br />
<br />
Default:<br />
lb_reopen_seconds = 900 # retry after 900 seconds<br />
<br />
===== lb_retrylimit =====<br />
{{Optional/en}}<br />
<br />
Retry next readers '''only''' if response time is higher then lb_retrylimit in '''milli seconds'''.<br />
<br />
Example:<br />
lb_retrylimit = 500 # retry next reader only, if response time is higher than 500 ms<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
===== lb_savepath ===== <br />
{{Optional/en}}<br />
<br />
Filenanme for saving loadbalancing statistics<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional/en}}<br />
<br />
hours after the loadbalancing statistics will be deleted<br />
<br />
default = 336<br />
<br />
===== lb_use_locking =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6166:12/28/2011</span><br />
<br />
disable parallel and identical ECM requests<br />
<br />
<br />
1 = on<br />
0 = off # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* You should choose this option only if:<br />
** slow system<br />
** high load<br />
** the same ECM requests come not from the cache, but will continue to the confirmed reader.<br />
<br />
* Adventages, if activated:<br />
** By synchronizing, an ECM request made by one. The identification of cache or request and assignment of the reader by loadbalancer is always successful.<br />
<br />
* Disadventages, if activated:<br />
** The synchronisation prevents multithreading and the probability of higher response times.<br />
<br />
* Adventages, if NOT activated:<br />
** Faster transit times for ECM requests<br />
<br />
* Disadventages, if NOT activated:<br />
** May have dual (n-fold) possible requests to the readers.<br />
<br/><br />
<br />
===== lb_retrylimits =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn:5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,Caid2:time2]...<br />
<br />
loadbalancing retry limit time per CAID in milliseconds, wilcard CAIDs with 2-digit Caids possible<br />
<br />
default = none<br />
<br />
example: <br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
ignore provider information CAIDs to reduce statistic date, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
example: <br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
default = none<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # enable automatic timeout based on load balancing statistics<br />
= 0 # default<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = percent<br />
<br />
percent added to average time as timeout time<br />
default = 30<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = milli seconds<br />
<br />
minimal time added to average time as timeout time<br />
default = 300<br />
<br />
===== lb_max_readers =====<br />
{{Optional/en}}<br />
<br />
lb_max_readers = limit (number)<br />
<br />
restrict the reader count to limit during learning<br />
<br />
0 = unlimited (default)<br />
x = restrict loadbalancer readers to limit x (number)<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional/en}}<br />
<br />
lb_auto_betatunnel = 0|1<br />
<br />
enable automatic Betacrypt tunneling for CAIDs 1801, 1833, 1834 and 1835 in loadbalancing mode<br />
lb_auto_betatunnel = 0 # disabled<br />
= 1 # enabled (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Betacrypt definition in oscam.user with betatunnel will be prefered [[streamboard:wiki/OSCam/en/Config/oscam.user#betatunnel|User-Betatunnel]]!<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
set mode for automatic Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only) <br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = number<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = always Betacrypt<br />
105 = represents the middle<br />
200 = always Nagravision<br />
<br />
=== Monitor ===<br />
'''Only if monitor is used!'''<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
==== port ====<br />
{{Optional/en}}<br />
UDP port for monitor<br />
port = 0 # monitor disabled<br />
= # port number<br />
<br />
Beispiel:<br />
port = 24480 # monitor on, port = 24480<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
serverip = # IP adress<br />
= # [blank] all IP's (default)<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured monitor connection<br />
[,IP address|IP address range]...<br />
<br />
Possible<br />
* one or more IP adresses<br />
* one or more IP adress ranges<br />
* mixture of IP adresses and IP adress ranges<br />
<br />
Example<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 and IP range 192.168.0.0 to 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] no secured monitor connection<br />
<br />
==== aulow ====<br />
{{Optional/en}}<br />
<br />
time no EMM occurs so that client is set to low in minutes<br />
<br />
Example<br />
aulow = 30 # After 30 minutes whithout EMM client will be switched from "active" to "on" (default).<br />
<br />
==== monlevel ====<br />
{{Optional/en}}<br />
<br />
monitor-level<br />
0 = no access to monitor (default)<br />
1 = only server and own procs<br />
2 = all procs, but viewing only<br />
3 = all procs, reload of oscam.user possible<br />
4 = complete access<br />
<br />
Example<br />
monlevel = 4 # complete access<br />
<br />
monlevel can be overwritten per user in oscam.user!<br />
<br />
==== appendchaninfo ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8546:03/13/2013<br />
</span><br />
<br />
Append channel name on log messages. Very useful when using [webif]!<br />
appendchaninfo = 1 # append chanel name<br />
= 0 # no append chanel name (default)<br />
<br />
=== lcd ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
==== lcd_outputpath ====<br />
{{Optional/en}}<br />
<br />
Path for LCD output<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
==== lcd_hideidle ====<br />
{{Optional/en}}<br />
<br />
hide reader in LCD output if reader idle > 20 seconds, default:0 <br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional/en}}<br />
<br />
LCD refresh interval (minimum 5), default:10<br />
<br />
=== WebIf ===<br />
'''Only if WebIf is used!'''<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
==== File format to send EMMs via the webinterface ====<br />
(by Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention'''<br />
<br />
* File has to be in TXT format.<br />
* The EMM-file should contain each PRE-CAM EMM in a new line.<br />
* EMMs should be in HEX representation.<br />
** Example: AABBCCDD...<br />
*Spaces and tabs between the bytes are allowed:<br />
**AA BB CC DD...<br />
*The HEX representation of each EMM's byte can be represented by upper or lower case - even mixed is allowed:<br />
**AA aa Aa aA...<br />
*Other chars and comments are not allowed.<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
<br />
default is 8888 if no httpport is set<br />
port for web interface,<br />
0 = disabled, praefix + = enable SSL<br />
<br />
Example<br />
httpport = 83 # Webinterface listening on '''http-port 83'''<br />
= +83 # Webinterface listening on '''https-port 83''' (SSL)<br />
0 # Webinterface disabled<br />
<br />
==== httpcert ====<br />
{{Optional/en}}<br />
<br />
file for http SSL certificate<br />
httpcert = oscam.cert # (look there)<br />
= # [blank] file oscam.pem (embedded) is used<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
example<br />
httpforcesslv3 = 0 none (default)<br />
= 1 force using SSLV3<br />
<br />
==== httpuser ====<br />
{{Optional/en}}<br />
<br />
Username for password protection. [blank] is default, of which is strongly discouraged! <br />
httpuser = # xyxyxy (all characters and figures are allowed)<br />
<br />
==== httppwd ====<br />
{{Optional/en}}<br />
<br />
Password for password protection. It is the same as for httpuser.<br />
httppwd = # 123456<br />
<br />
'''The ''user'' and ''pwd'' parameters are queried when connecting to the webinterface in a messagebox. If they are missing ore corrupted a message ''Forbidden'' appears and the connection is aborted!'''<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6625:05/15/2012</span><br />
<br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Do not add the content of the embedded CSS before the content of the custom CSS (default)<br />
1 # embedded CSS will be added before external custom CSS (specified by the [[#httpcss|httpcss]] parameter)<br />
<br />
This parameter can be used to override the embedded CSS with custom styles. To see the current CSS styles use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
==== httpcss ====<br />
{{Optional/en}}<br />
<br />
path for external CSS file<br />
<br />
For webinterface different styles are available. Put custom CSS files (ending with .css extension) in the oscam config directory to managed your custom styles with WebIf.<br />
<br />
Example<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] embedded style is used (default)<br />
<br />
To see the current CSS style, use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
Styles you find here: [[Streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
==== httptpl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7083:06/25/2012</span><br />
<br />
path for external templates and picons<br />
httptpl =<br />
= # [blank] No external templates<br />
<br />
path for external templates and picons, multiple simultaneously templates and picons are possible by creat‐ <br />
ing sub folders (maximum length of 32 alphanumeric characters), sub folders naming is corresponding to sub <br />
folder in URL, default:none <br />
<br />
example <br />
httptpl = /this/is/my/path <br />
<br />
folder with multiple templates: <br />
/this/is/my/path/template<br />
/this/is/my/path/template2 <br />
<br />
valid URLs: <br />
http://host:port/template1 <br />
http://host:port/template2<br />
<br/><br />
<br/><br />
==== httpoverwritebakfile ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = overwrite backup configurations files (*.bak)<br />
0 = default<br />
<br/><br />
<br/><br />
<br />
<br />
<br />
==== httplocale ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
set the "locale environment"<br />
<br />
default = blank [none]<br />
<br />
look here::<br />
<br />
http://en.wikipedia.org/wiki/locale<br />
<br />
==== httpjscript ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
path for oscam.js javascript, def: none<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional/en}}<br />
<br />
status refresh in seconds<br />
<br />
httprefresh = 7 # status will be refreshed after 7 seconds<br />
= # [blank] no refreshing<br />
<br />
==== httppollrefresh ====<br />
{{Optional/en}}<br />
<br />
refreshtime for polling in seconds<br />
<br />
httppollrefresh = 60 # polling will be refreshed after 60 seconds<br />
= # [blank|0] no refreshing poll<br />
<br />
==== httpshowpicons ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # show picons in userlist<br />
0 # default<br />
<br />
If this parameter is enables, then a new column is added to the USERS tab which display the picons of the last watched channels by active users. The folder where the picons must be configured in the httppiconpath.<br />
<br />
Possible format are:<br />
IC_caid_srvid.tpl<br />
IC_caid_provid_srvid.tpl<br />
IC_servicename.tpl<br />
<br />
added support for picons by channel name<br /><br />
syntax is:<br /><br />
take service-name from oscam.srvid,<br /><br />
replace all upper-case letters with lower case,<br /><br />
replace * with star,<br /><br />
replace & with and,<br /><br />
replace + with plus,<br /><br />
remove everything but a-z and 0-9,<br /><br />
if the result is name, the picon file will be IC_name.tpl<br /><br />
for example:<br /><br />
service-name "BBC-ONE +HD"<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
if service-name ends with hd, and picon is not found, fallback to name without hd, example:<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
-> not found, search for:<br /><br />
picon file: "IC_bbconeplus.tpl"<br /><br />
<br />
==== httphideidleclients ====<br />
{{Optional/en}}<br />
<br />
Enables hiding clients after idle time set with parameter ''' hideclient_to''' in section [monitor].<br />
httphideidleclients = 1 # hide<br />
= 0 # hide not (default)<br />
<br />
==== hideclient_to ====<br />
{{Optional/en}}<br />
<br />
Time to hide clients in the monitor if not sending requests. See also parameter '''httphideidleclienst''' in section [webif].<br />
hideclient_to = 1 # hide clients<br />
= 0 # no hide<br />
<br />
==== httphidetype ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
type = letter which defines types to hide in web interface status page (see Typ column), <br />
default: none. s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
==== httpscript ====<br />
{{Optional/en}}<br />
<br />
Path to an executable script which you wish to start from web interface<br />
httpscript = # path<br />
= # [blank] no path<br />
<br />
You can run script file from script.html (SCRIPTS item in main menu)<br /><br />
If the script file contains the "echo" will be it displayed in a Web interface.<br />
<br />
If the file can not run displays<br />
[Error]: Script "name_of_script.sh" not executable!<br />
<br />
If does not exist script displays<br />
[Error]: Script "name_of_script.sh" not found!<br />
(Works If you delete the script and refresh page)<br />
<br />
==== httpallowed ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8842:08/17/2013</span><br />
<br />
http web interface connections allowed. [blank] is allowed (default), but that makes no sense! If the webinterface to be used, then there must be a way to connect with him. Therefore we declare this parameter as '''mandatory'''!<br />
<br />
With '''::1''' OSCam decides to resolve 'localhost' to '''IPv6'''!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
<br />
<br />
Example<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host and range 192.168.0 are allowed<br />
resolving to IPv6<br />
<br />
'''default values'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1<br />
<br />
==== httpdyndns ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6558:03/21/12</span><br />
<br />
http web interface connections allowed<br />
<br />
httpdyndns = hostname [,hostnahme][,hostname]<br />
<br />
Example<br />
httpdyndns = host1.example.com,host2.example.com<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional/en}}<br />
<br />
write config:<br />
0 = all not empty parameters, all not default parameters, all parameters not containing the same value as the same parameter in global configuration (default)<br />
1 = all parameters<br />
<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional/en}}<br />
<br />
read only modus for web interface<br />
<br />
httpreadonly = 1 # only read<br />
= 0 # all is possible (default)<br />
<br />
<br />
==== httppiconpath ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9463/01/28/2014</span><br />
<br />
httppiconpath = path<br />
<br />
path to picons, default [blank] none<br />
<br />
====httphelplang====<br />
{{required}}<br />
<br />
set right language for wiki entry point<br />
de|en|fr <available wiki languages><br />
<br />
==== httposcamlabel ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
set individual label in web interface header, default: OSCam<br />
<br />
==== http_status_log ====<br />
{{Optional/en}}<br />
<br />
http_status_log = 0|1<br />
1 = display log in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowreaderinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowreaderinfo = 0|1<br />
1 = display readers informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowecminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowecminfo = 0|1<br />
1 = display readers and users ECM informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowuserinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowuserinfo = 0|1<br />
1 = display users informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowcacheexinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowcacheexinfo = 0|1<br />
1 = display CacheEX informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowmeminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowmeminfo = 0|1<br />
1 = display memory usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowloadinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowloadinfo = 0|1<br />
1 = display load average and CPU usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
<br/><br />
<br/><br />
<br />
=== [cache] ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW since svn 8358:02/16/2013</span><br />
<br />
{{OSCamConfCacheParameter}}<br />
<br />
<br />
==== delay ====<br />
{{optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
==== max_time ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
==== max_hit_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8910:09/10/2013</span><br />
<br />
max_hit_time = in seconds<br />
<br />
maximum time for cache exchange hits resists in cach for evaluating wait_time, default: 15<br />
<br />
<br />
<br />
==== wait_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 8077:01/06/2013</span><br />
<br />
wait_time = milli-seconds<br />
= [blank] none (default)<br />
<br />
wait time for cache exchange (mode 2 & 3 only!)and Cardserverproxy before sending ECM to reader or proxy<br />
<br />
Example:<br />
0:50:250,0200@00009X:50:150:950,0500@000001:150:1602&ffdf:1200<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional/en}}<br />
<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode:<br />
specify behaviour for counter parameter<br />
<br />
0 = when wait_time expires, serve highest counter's cw got anyway, even if no counter reached.<br />
1 = never serve cw (coming from cacheex) stored in cache if its counter not reaches counter. When wait_time expires, requests<br />
will go to normal readers! Only when a cw reaches counter, it can be served to clients.<br />
<br />
Default = 0<br />
<br />
<br />
* counter:<br />
set minimum cw counter to allow cw is used.<br />
<br />
Default = 1 (use default behaviour: use cw with highest counter when cache is checked)<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = allow bad cycles from a fixed fallback reader. Default = 0<br />
<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== csp_port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
This is a UDP ('''not TCP''') listen port for incoming traffic from csp nodes<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
==== csp_serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
This is the local bind IP of csp_port (see above!)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 disable (default)<br />
= 1 enable<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: not for all NDS SC's!'''<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID enabled for CW cycle check, default: none<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = count<br />
<br />
maximum CW cycle list entries, default = 500, maximum = 4000<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = minutes<br />
<br />
minimum time a learned cycletime resists in memory, default = 0, maximum = 15<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = log bad CW cycle only <br />
1 = drop bad CW cycle (default)<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, <br />
1 = drop old CW cycle, <br />
0 = no drop(default)<br />
<br/><br />
==== cwcycle_sensitive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (or more) same bytes and drop new CW<br />
3 = 3 (or more) same bytes and drop new CW<br />
4 = 4 (or more) same bytes and drop new CW<br />
<br />
<br/><br />
==== cwcycle_usecwcfromce ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = use CW Info from cache exchange<br />
0 = default<br />
<br/><br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
answer when cache exchange timeount expires, if no normal readers are vavailable for sending ECM's::<br />
<br />
0 = immediatly send '''not found''' to client (default)<br />
1 = wait for cache exchange answer until client timeout expires<br />
<br />
<br/><br />
<br/><br />
<br />
<br/><br />
<br />
=== csp (UDP) ===<br />
Section only needed if using cache exchange<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:02/16/2013 look at '''[cache]'''!</span><br />
<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6124:12/23/2011</span><br />
<br />
UDP listen port for incoming traffic from csp nodes<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
==== serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6124:12/23/2011</span><br />
<br />
Local bind IP of the above udp port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
=== Camd 33 (TCP) ===<br />
Section required only if camd33 will be used as client protocol!<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for camd 3.3x clients, 0 = disabled, default:0<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # listenig to all<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured camd 3.3x client connection<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
Example:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt = [none]<br />
<br />
==== passive ====<br />
{{Optional/en}}<br />
<br />
force passive camd 3.3x client<br />
<br />
Camd3.3x protocol generally has aktive clients. In certain circumstances the client must switched on only "passive" mode.<br />
<br />
Example:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
==== key ====<br />
{{Optional/en}}<br />
128 bit key<br />
<br />
key for camd 3.3x client encryption<br />
<br />
<br />
Example:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key = # (blank] none (default)<br />
<br />
=== cs357x (UDP) ===<br />
Section required only if cs357x will be used as client protocol! These protocols principle encrypt and build the key from user name.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''cs357x''' was also known as '''camd35''' designated. Both terms mean the same protocol with the same functions and parameters. In the future, to avoid confusion '''only cs357x''' is used.<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
UDP port for camd 3.5x|cs357x clients. Port must be opened at router!<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35|cs3.57x-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== cs378x (TCP) ===<br />
Section required only if cs378x (camd 3.5x in TCP) will be used as client protocol!<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
Port(s) TCP for Cs378x clients (camd 3.5x in TCP mode). Port(s) must be opened at router!<br />
<br />
port@CAID[:ident][,ident]...[;port@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@0500:030B00;22764@0648<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell cs3.78x clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disable<br />
<br />
<br />
Mor here: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== Newcamd (TCP) ===<br />
Section required only if newcamd will be used as client protocol!<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
==== key ====<br />
{{required}}<br />
DES key<br />
Default key for newcamd client encryption.<br />
<br />
Example:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
==== port ====<br />
{{required}}<br />
TCP port/DES key/CAID/ident definitions. Each CAID requires a separate port. If you don't specify a DES key for a port, the default DES Key will be used!<br />
<br />
port[{DES key}]@CAID[:ident][,ident]...[;port[{DES key}]@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@1234:000000 # (CAID 1234 connected with port 15000)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 connected with port 15000. CAID 5678 with port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = [blank]<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
!! Dyn DNS Addresses are not forseen here and won't work !!<br />
<br />
Example:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed = [blank]<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<br />
Example:<br />
keepalive = 1 # (enabled)<br />
keepalive = 0 # (disabled)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
==== mgclient ====<br />
{{Optional/en}}<br />
<br />
Enable mgcamd extended newcamd protocol, allowing for a single connection to work with mutliple providers, default:0<br />
<br />
Example:<br />
mgclient = 1 # (enabled)<br />
mgclient = 0 # (disabled)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br/><br />
<br/><br />
=== '''scam''' ===<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9878:09/29/2014</span><br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port = port<br />
<br />
UDP port for scam server, default = 0<br />
<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br/><br />
<br/><br />
<br />
=== Radegast ===<br />
Section required only if radegast will be used as client protocol!<br />
<br />
{{OSCamConfRadegastParameter}}<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for radegast clients (enables radegast)<br />
port =<br />
= 0 (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br />
==== user ====<br />
{{required}}<br />
<br />
user name for radegast client<br />
user = username<br />
<br />
=== Serial ===<br />
Section required only if seral interface will be used!<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
==== device ====<br />
{{Optional/en}}<br />
<br />
Parameter of device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = name of Serial Device<br />
option = timeout = milli seconds timeout for connection default: 50<br />
= delay milli seconds additive between 2 characters<br />
<br />
supported serial devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
=== Cccam (TCP) ===<br />
Section required only if Cccam will be used as client protocol!<br />
{{OSCamConfCccamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6206:01/07/2012</span><br />
<br />
Port = 0|port[,port...]<br />
<br />
TCP/IP-Ports for CCcam clients, enables Cccam protocol!<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled (default)<br />
<br />
==== version ====<br />
{{Optional/en}}<br />
<br />
<br />
define CCcam version, minimum CCcam version 2.0.11, used with original CCcam only, default:none<br />
<br />
<nowiki><main version>,<version>,<sub version></nowiki><br />
<br />
Example:<br />
version = 2.0.11<br />
<br />
==== reshare ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
reshare level for CCcam clients:<br />
-1 = no resharing<br />
0 = resharing for direct peer only<br />
1 = resharing for direct peer and next level<br />
x = resharing for direct peer and next x level (x for number of level)<br />
10 = (default)<br />
<br />
Example:<br />
reshare = 1 resharing only for direct peer and next level<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
==== reshare_mode ====<br />
{{Optional/en}}<br />
<br />
CCcam reshare mode<br />
0 = reader reshares only received SCs for CCcam readers,<br />
defined filters/CAIDs/idents on other readers (default)<br />
1 = reader reshares received SCs (like=0) and defined services<br />
2 = reader reshares only defined reader services as virtual SCs<br />
3 = reader reshares only defined user services as virtual SCs<br />
4 = reader reshares only received cards<br />
<br />
Every server is shared as hop=0 and with defined reshare values.<br />
<br />
Service reshare only works if positive services defined: no service - no reshare!<br />
<br />
==== ignorereshare ====<br />
{{Optional/en}}<br />
<br />
<br />
CCcam reshare setting:<br />
0 = use reshare setting of server (default)<br />
1 = use reshare setting of reader or user<br />
<br />
Example:<br />
ignorereshare = 1 reshare settings of reader or user are used<br />
<br />
==== stealth ====<br />
{{Optional/en}}<br />
<br />
Behaviour like the original CCcam: no activate partner detection and extended OSCam-CCcam protocol, prevent other OSCam to detect the server as OSCam server.<br />
<br />
stealth = 1 # stealth enabled<br />
= 0 # stealth disabled (default)<br />
<br />
==== minimizecards ====<br />
{{Optional/en}}<br />
<br />
mode how to provide CCcam servers to CCcam clients:<br />
0 = no aggregation, remove duplicates only (default)<br />
1 = based on minimum hop: two SCs with different hops are summarized, new SCs get a smaller hop<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional/en}}<br />
<br />
<br />
interval to provide share list update to CCcam clients in seconds<br />
0 = update based on server updates, values <= 10 are invalid and will be set to 30 <br />
= [blank] 240 (default)<br />
<br />
==== keepconnected ====<br />
{{Optional/en}}<br />
<br />
set CCcam keepalive modus:<br />
0 = disconnect client when max idle time is reached<br />
1 = keep client connected (default)<br />
<br />
==== recv_timeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7672:10/09/2012</span><br />
<br />
recv_timeout = milli-seconds<br />
<br />
set network timeout for receiving data<br />
default = 2000<br />
<br />
==== forward_origin_card ====<br />
{{Optional/en}}<br />
<br />
forward_origin_card = 0|1<br />
<br />
1 = forward ECM request to reader holding this card, loadbalancer, fallback and caching will be disabled <br />
0 = default<br />
<br />
==== nodeid ====<br />
{{Optional/en}}<br />
<br />
nodeid = ID<br />
<br />
set CCcam node ID in hex, default:none<br />
<br />
example<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br/><br />
=== Pandora ===<br />
{{OSCamConfPandoraParameter}}<br />
<br />
==== pand_skip_send_dw ====<br />
<br />
<br />
pand_skip_send_dw = dummy<br />
<br />
<br />
==== pand_allowed ====<br />
<br />
<br />
pand_aloowed = dummy<br />
<br />
<br />
==== pand_usr ====<br />
<br />
<br />
pand_user = dummy<br />
<br />
<br />
==== pand_pass ====<br />
<br />
<br />
pand_pass = dummy<br />
<br />
<br />
==== pand_ecm ====<br />
<br />
<br />
pand_ecm = dummy<br />
<br />
<br />
==== pand_port ====<br />
<br />
<br />
pand_port = dummy<br />
<br />
<br />
==== pand_srvid ====<br />
<br />
pand_srvid = dummy<br />
<br />
<br/><br />
<br/><br />
<br />
=== GBox ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
{{OScamConfGboxParameter}}<br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 {3 3}}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== hostname ====<br />
{{required}}<br />
<br />
hostname = my IP or ddns<br />
<br />
examples:<br />
hostname = 192.168.1.120<br />
hostname = willy.noip.org<br />
<br />
<br/><br />
<br />
==== my_password ====<br />
{{required}}<br />
<br />
my_password = 4 hex bytes, 8 chara<br />
<br />
example:<br />
my_password = 98AF3E25<br />
<br />
<br/><br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port= define incoming UDP port(s) used by Gbox protocol<br />
<br />
port= port#1[[,port#2]...[,port#32]]<br />
<br />
Maximum 32 ports.<br />
<br />
<br/><br />
<br />
==== proxy_card ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy reader card(s) to be reshared into gbox network, default = none<br />
<br />
proxy_card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
example:<br />
<br />
proxy_card = 18300000,0D950400,05050F00 <br />
<br />
<br/><br />
<br />
==== ccc_reshare ====<br />
{{Optional/en}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = enable cccam-cards to be reshared into gbox network, default = 0 (global setting)<br />
<br />
- note: set up caids to be reshared in 'ccc_gbx_caid ='<br />
<br />
- unique peer reshare level to be set in oscam.server [reader]-> cccam_reshare<br />
<br />
<br/><br />
<br />
==== ccc_gbx_caid ====<br />
{{Optional/en}}<br />
<br />
ccc_gbx_caid = caid_1,caid_2,...<br />
<br />
- note: 'ccc_reshare' must be set as well<br />
<br />
<br/><br />
<br />
==== my_vers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9645:04/09/2014</span><br />
<br />
<br />
my_vers = version<br />
<br />
set gbox version hexadecimal low byte<br />
<br />
default = 2A<br />
<br />
<br/><br />
<br />
==== my_cpu_api ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9712:05/11/2014</span><br />
<br />
<br />
my-cpu_api = byte<br />
<br />
set gbox CPU and API byte in hexadecimal, default = 40<br />
default = 40<br />
<br />
<br/><br />
<br />
==== gbox_reconnect ====<br />
{{Optional/en}}<br />
<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min:60, max:300<br />
<br />
<br/><br />
<br />
==== accept_remm_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11399:29/01/2018</span><br />
<br />
Accept to send Remote EMMs to specified Server Peer-IDs<br />
<br />
accept_remm_peer = peer#1[[,peer#2]...[,peer#8]]<br />
<br />
<br/><br />
<br />
==== dis_attack_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11360:16/02/2017</span><br />
<br />
Disable creation of attack.txt<br />
<br />
dis_attack_txt = 0|1 - default: 0 <br />
<br />
<br/><br />
<br />
==== log_hello ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11231:20/04/2016</span><br />
<br />
Display hello messages in debug log<br />
<br />
log_hello = 0|1 - default: 1 <br />
<br />
<br/><br />
<br />
==== ignore_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Ignore specific peer ID(s) totally. Login rejected.<br />
<br />
ignore_peer = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== block_ecm ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Block ECM for specific peer ID(s).<br />
<br />
block_ecm = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== tmp_dir ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/2014</span><br />
<br />
gbox tempory directory<br />
<br />
tmp_dir = /path/to/dir <br />
<br />
default: /tmp/.oscam<br />
<br />
<br/><br />
<br />
==== gsms_disable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9714:05/11/2014</span><br />
<br />
<br />
gsms_disable = 0|1<br />
<br />
0 - Gbox Short Message Service (GSMS) is enabled<br/><br />
1 - disable gbox short message service (GSMS)<br/><br />
<br />
default = 1<br />
<br />
<br/><br />
<br/><br />
<br />
==== gbox_save_gsms ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_save_gsms=0|1<br />
<br />
0 = don't save GSMS in configuration<br/><br />
1 = save all GSMS field in configuration<br />
<br />
You need to press save button to really save it!<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_type=0|1<br />
<br />
0 = normal text message<br/><br />
1 = normal text message + OSD (On Screen Display)<br />
<br/><br />
<br/><br />
<br />
==== gbox_dest_peers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_dest_peers = [BOXID[,BOXID]...[,BOXID]]<br />
<br />
Maximum 16 * 2 bytes (4 hexa digits), comma-separated. For broadcast to all use FFFF.<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_txt=Your text to send to peers.<br />
<br />
From 6 to 127 alphanumerical characters.<br />
<br/><br />
<br/><br />
<br />
=== DVBapi ===<br />
{{Optional/en}}<br />
<br />
Section required only if OSCam will also be used as client!<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional/en}}<br />
<br />
DVB API enabled<br />
<br />
Example:<br />
enabled = 0 # disabled (default)<br />
enabled = 1 # enabled<br />
<br />
==== user ====<br />
{{required}}<br />
user name for DVB API client<br />
Example:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
==== au ====<br />
{{Optional/en}}<br />
<br />
AU mode for dvbapi:<br />
au = 0 # disable AU (default)<br />
au = 1 # enable AU<br />
<br />
==== pmt_mode ====<br />
{{Optional/en}}<br />
PMT mode:<br />
pmt_mode = 0 # use camd.socket and PMT file (default)<br />
pmt_mode = 1 # disable reading PMT file<br />
pmt_mode = 2 # disable camd.socket<br />
pmt_mode = 3 # read PMT file on startup only<br />
pmt_mode = 4 # do not use signal handler for monitoring /tmp<br />
pmt_mode = 5 # do not use signal handler to monitor /tmp & disable camd.socket<br />
pmt_mode = 6 # use PMT server mode <span style="background-color:Green;color:White;padding:0 5px;">NEU - NEW - NOUVEAU - NUOVO svn8680:05/06/2013</span><br />
<br />
==== request_mode ====<br />
{{Optional/en}}<br />
CAID request mode:<br />
0 = try all possible CAIDs one by one (default)<br />
1 = try all CAIDs simultaneously<br />
<br />
==== listen_port ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP/IP port for SAT IP clients, filtering has to be done on client site<br />
<br />
0 = disabled (default)<br />
<br />
==== boxtype ====<br />
{{required}}<br />
set boxtype, auto detection of DVB API will be aspired:<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt|qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
ipbox with camd.socket support, currently only with PGI image version 0.6 or above, verified on HD models only<br />
<br />
ipbox-pmt can be used on any DGS based images (with or without camd.socket support), verified on HD models only<br />
<br />
pc is for generic pc support (currently supported on VDR with vdr-plugin-dvbapi)<br />
<br />
==== cw_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
cw_delay = milli-seconds<br />
<br />
delay of CW writing, default = none<br />
<br />
==== delayer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6808:05/14/2012</span><br />
<br />
delayer = milli-seconds<br />
<br />
minimum time to write CW<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
= 1 reopen demux devices in each channel switching,<br />
= 0 default<br />
<br />
==== decodeforever ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = trying to decode on all CAIDs<br />
0 = default<br />
<br />
==== ecminfo_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10722:06/13/15</span><br />
<br />
Define the type of ecm.info file to create, ecminfo_type = 0|1|2|3|4|5<br />
<br />
0 = default oscam syntax<br />
1 = default oscam syntax with ecmtime in ms instead of s<br />
2 = wicardd<br />
3 = mgcamd<br />
4 = cccam<br />
5 = camd3<br />
<br />
==== read_sdt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10766:06/15/15</span><br />
<br />
If it is not yet available, this option automatically add entries in your oscam.srvid2 (or oscam.srvid) and in your oscam.provid files. You need to stay '''more than 30 seconds''' on a channel for the auto-detect to start. So both channel name and provider name are retrieved. If entries already exist they are not changed nor updated, so you keep full control on the content of both files, only missing entries are added.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = disabled (default)<br />
1 = on, do not save FTA channels<br />
2 = on, save FTA channels<br />
<br />
==== write_sdt_prov ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10841:06/27/15</span><br />
<br />
First enable the read_sdt parameter then you can specify if the provider name is saved or not into the oscam.srvid2 or oscam.srvid file. This is not mandatory since the provider name is now retrieved automatically from the oscam.provid file.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = off, do not write provider name into oscam.srvid/2 (default)<br />
1 = on, write provider name into oscam.srvid/2<br />
<br />
=== Anticasc ===<br />
Section is needed if anticascading will be used to protect against unauthorized forwarding CardSharing. <br />
{{OSCamConfAnticascParameter}}<br />
<br />
==== enabled ====<br />
{{required}}<br />
<br />
enabled anti-cascading:<br />
enabled = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== numusers ====<br />
{{Optional/en}}<br />
anti-cascading: user per account (number)<br />
numusers = 0 # anticascading disabled (default)<br />
= 1 # cascading for 1 user allowed ==> (1*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 11 ecms allowed per minute<br />
= 2 # cascading for 2 users allowed ==> (2*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 17 ecms allowed per minute <br><br />
<span style="color:Blue;padding:0;5px"><B>10</B></span> = number you have put in oscam.ac. Default value is 10<br />
<br />
==== sampletime ====<br />
{{Optional/en}}<br />
duration of sample in minutes:<br />
sampletime = 5 # duration 5 minutes<br />
= # [blank] duration 2 minutes (default)<br />
<br />
Ex: numusers = 1 ==> 11 ecms * 5 minutes ==> 55 ecms allowed in 5 minutes <br />
numusers = 2 ==> 17 ecms * 5 minutes ==> 85 ecms allowed in 5 minutes<br />
<br />
==== samples ====<br />
{{Optional/en}}<br />
<br />
number of additionnal ecms allowed (possible values between 2 and 10)<br />
samples = 7 # 7 additional ecms allowed<br />
= # [blank] 10 additional ecms allowed (default)<br />
<br />
==== penalty ====<br />
{{Optional/en}}<br />
Level of the penalty if the user exceeds the result shown in Ex on Sampletime<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay ([[OSCam/en/Config/oscam.conf#fakedelay|fakedelay]])<br />
<br />
penalty can be overwritten per user in oscam.user<br />
<br />
==== aclogfile ====<br />
{{Optional/en}}<br />
file for anti-cascading logging<br />
aclogfile =<br />
= # [blank] no logfile (default)<br />
<br />
==== fakedelay ====<br />
{{Optional/en}}<br />
<br />
fake delay time in milli seconds (possible values between 100 and 3000)<br />
fakedelay = 500 # delay 500 milli seconds<br />
= # [blank] 1000 milli seconds (default)<br />
<br />
==== denysamples ====<br />
{{Optional/en}}<br />
<br />
How many samples should be penalized?<br />
denysamples = 10 # 10 samples will be penalized<br />
= # [blank] 8 Samples will penalized (default)<br />
<br/><br />
<br />
==== acosc_enabled ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br/><br />
acosc_enabled = 0|1<br />
1 = enable anticascading oder SIDs count<br />
0 = default<br />
<br/><br />
==== acosc_max_active_sids ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = count<br />
<br />
maximum activ SIDs with anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br />
<br/><br />
<br />
==== acosc_zap_limit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = count<br />
<br />
zap limit for anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
level of penalty with anticascading over SIDs count:<br />
<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = seconds<br />
<br />
penalty duration for anticascading over SIDs count:<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
==== acosc_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_delay = milliseconds<br />
<br />
delay for anticascading over SIDs count<br />
<br />
0 = unlimites (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
<br />
<br />
<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.conf&diff=13521
OSCam/en/Config/oscam.conf
2020-02-24T15:03:51Z
<p>Felixka: /* ccc_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
==oscam.conf==<br />
<br />
=== The [global] section ===<br />
<br />
The main configuration file for OSCam contains global parameters such as debugging, logging, monitor, protocols and anti-cascading. Sections in oscam.conf are nonrecurring. The [global] section is required. All other sections are optional.<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If a parameter is empty or is not listed in config-file, then apply the default values !<br />
<br />
==== nice ====<br />
{{Optional/en}}<br />
<br />
'''Systempriority'''<br />
<br />
OSCam requires almost no CPU-power. But if CPU-power is required, it should be available immediatly. Values between 20 and -20 are possible. 20 = low, -20 = very high. If this parameter is commented out (#), this function is not called. Important for example for dbox2[http://de.wikipedia.org/wiki/DBOX2], if the error messages "''relocation error:setpriority''". See [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Example:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
===== initial_debuglevel =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10705:06/11/15</span><br />
<br />
Set the debuglevel on startup.<br />
<br />
Example:<br />
initial_debuglevel = 8<br />
<br />
Default:<br />
initial_debuglevel = 0<br />
<br />
===== pidfile =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8176/01/24/2013</span><br />
<br />
pidfile = set pidfile, [blank] none (default)<br />
<br />
Change PID file name an path. If default = oscam.pid in /tmp<br />
<br />
Example:<br />
pidfile = /var/run/oscam.pid<br />
<br />
===== logfile =====<br />
{{optional/en}}<br />
<br />
Logging target<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
You can define a maximum of one filename (not more!) and additionally to log to stdout or syslog (you can also only log to stdout or syslog and omit the filename).<br />
<br />
Opportunities:<br />
<br />
logfile = /var/log/oscam.log # file or linux device (for example /dev/tty)<br />
logfile = syslog # log to syslogd <br />
logfile = stdout # showing the log on the console<br />
<br />
Example:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format logfile:<br />
CAID&ident/provider/length:checksum<br />
<br />
===== ecmfmt =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
define ECM log format, default:c&p/i/s/l:h <br />
<br />
possible variables: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and CCcam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , this ID will be replaced with the tier-description from oscam.tiers (if found)<br />
w = CW<br />
y = payload (short, 3 bytes)<br />
Y = payload (long, 6 bytes)<br />
<br />
<br />
use a value as prefix to hide variable with this value, control characters will be escaped by "\" <br />
<br />
example:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w HOP:j<br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn10048:11/30/2014</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs will be dropped, if CWs do not have an odd an even sample (default)<br />
1 = disabled<br />
<br />
===== loghistorysize =====<br />
{{optional/en}}<br />
<br />
loghistorysize = bytes<br />
<br />
size of log message history in web interface or monitor<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) #stage 2 is used only if '''preferlocalcards = 1''' was activated in [global] section. <br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
example<br />
<br />
P/2/2/2 or L/2/4/4<br />
<br />
===== maxlogsize =====<br />
{{required}}<br />
<br />
Here the maximum size of logfiles are set in KBytes. This is especially important for server with only a small amount of memory (dbox2). Therefore it is strongly recomended to determine carefully that size at such servers. Not infrequently a system "bursting" because the logfile uncontrolled large scale adopted!<br />
<br />
Example<br />
maxlogsize = 20 # Logfile reaches to 20 KBytes<br />
= 0 # Logfile '''unlimited'''<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile reaches to 10 KBytes (default)<br />
<br />
===== logduplicatelines =====<br />
{{optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8290/02/05/2013</span><br />
<br />
logduplicatelines = 0|1<br />
<br />
1 = disable detection of duplicate lines in log file<br />
0 = enable detection of duplicate lines in logfile = default<br />
<br />
===== disablelog =====<br />
{{optional/en}}<br />
<br />
switches logfile '''off'''<br />
1 = '''no log''' <br />
0 = '''log''' <br />
<br />
Example:<br />
disablelog = 1 # '''no''' log <br />
<br />
Default:<br />
disablelog = 0 # '''log'''<br />
<br />
===== cwlogdir =====<br />
{{Optional/en}}<br />
<br />
<br />
A path for cw logging can be configured here. The path is relative to the work directory and must exist. Otherwise no logs are created and no errors are reported. <br />
<br />
CWs (control words) are the answers of the card which decrypts a certain channel for some seconds before the next cw is transmitted. The CW log file can be used for delayed decoding of this channel. This is also called offline decoding. Watch this [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
Oscam creates a new *.cwl file for each channel and each day. The file name contains the date, service ID and service name, e.g. 110808_I000B_Sky_Cinema_+1.cwl with this contents:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
All cws are logged if at least one user watches the channel. Please choose a path with enough space, since per day and channel some 10KB of data are created. A script that moves/deletes the log files regularly is recommended.<br />
<br />
Example:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] no path for cw-log, logging disabled<br />
<br />
===== emmlogdir =====<br />
{{Optional/en}}<br />
<br />
Setting a path for emm-log. You can define with the "saveemm-*"-Parameters in oscam.server which EMMs should be logged.<br />
<br />
Example:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] the config folder will be used for emm logging<br />
<br />
===== usrfile =====<br />
{{Optional/en}}<br />
<br />
Set a name für userfile<br />
<br />
Format of the userfile: <br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Example:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
===== disableuserfile =====<br />
{{Optional/en}}<br />
<br />
Now it is crazy: Even if a logfile is switched on (see logfile), the userfile can be turned off!<br />
<br />
Example:<br />
disableuserfile = 1 # '''no''' userfile <br />
= 0 # '''userfile'''<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
===== usrfileflag =====<br />
{{Optional/en}}<br />
<br />
Setting the logging-modus<br />
0 = Only login and logout will be logged<br />
1 = Each zapping from client will be logged<br />
Default is 0<br />
<br />
Example:<br />
usrfileflag = 1 # All will be logged<br />
<br />
Default:<br />
usrfileflag = 0 # Only login und logout will be logged<br />
<br />
===== saveinithistory =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn7128:07/02/2012</span><br />
<br />
Save SC init history to /tmp/.oscam/reader<number>. Needed to show entitlements.<br />
<br />
Example:<br />
saveinithistory = 1 # save to /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # no save<br />
<br />
===== mailfile =====<br />
{{Optional/en}}<br />
<br />
mailfile = file<br />
<br />
define file saving NDS Videogard mail messages from provider. Default: [blank] none<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
delay in millisencons for asking cache exchange mode 1 readers, default: none<br />
<br />
===== disablemail =====<br />
{{Optional/en}}<br />
<br />
disablemail = 0|1<br />
<br />
disable saving NDS Videogard mail messages form provider. Default = 1 (disabled)<br />
<br />
===== sysloghost =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set remote syslog server will be activated. Messages will be sent to this IPv4 address. If not set remote syslog server not work.<br />
<br />
Example:<br />
sysloghost = 192.168.1.167<br />
<br />
===== syslogport =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set ''sysloghost'' remote syslog server will be activated. Messages will be sent to this port. If not set port 514 is used as default. <br />
<br />
Example:<br />
syslogport = 515<br />
<br />
Default:<br />
syslogport = 514<br />
<br />
==== Reader ====<br />
<br />
===== enableled =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
===== serialreadertimeout =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8541:03/13/2013</span><br />
<br />
'''Only using Serialreader!'''<br />
<br />
timeout for serial reader in milli-seconds<br />
<br />
Example:<br />
serialreadertimeout = 1200 # Timeout after 1200 milli-seconds<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout after 1500 milli-seconds<br />
<br />
===== waitforcards =====<br />
{{Optional/en}}<br />
<br />
wait for local SCs on startup before opening network ports<br />
<br />
Example:<br />
waitforcards = 0 # don't wait<br />
<br />
Default:<br />
waitforcards = 1 # wait<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional/en}}<br />
<br />
waitforcards_extra_delay = milli seconds<br />
<br />
additional delay in milli seconds after waiting for local SCs on startup before opening nework ports<br />
<br />
default = 500<br />
<br />
===== preferlocalcards =====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn9605:03/29/2014</span><br />
<br />
try decoding on local cards first<br />
<br />
Example:<br />
preferlocalcards = 0 # local cards are used like remote reader<br />
preferlocalcards = 1 # prefer CacheEx sources <br />
preferlocalcards = 2 # prefer local cards<br />
<br />
Default:<br />
preferlocalcards = 1 # prefer CacheEx sources<br />
<br />
===== readerrestartseconds =====<br />
{{Optional/en}}<br />
<br />
waiting time in seconds beetween restarts<br />
<br />
Example:<br />
readerrestartseconds = 10 # waiting time 10 seconds<br />
= 0 # '''no restarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # waiting time 5 seconds<br />
<br />
===== block_same_ip =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_ip = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same ip address, default = 1<br />
0 = no reject<br />
<br />
===== block_same_name =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_name = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same name, default = 1<br />
0 = no reject<br />
<br />
==== Cache ====<br />
<br />
===== cachedelay =====<br />
{{optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
===== max_cache_time =====<br />
<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
===== max_cache_count =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = count, default 1000<br />
<br />
maximum CWs in cache<br />
<br />
===== cacheexwaittime =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
maximum wait time for a cache entry in milli seconds, default:50 <br />
<br />
===== cacheexenablestats =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== Client ====<br />
<br />
===== clienttimeout =====<br />
{{Optional/en}}<br />
<br />
value in milli-seconds for client process to wait for key<br />
<br />
Examples:<br />
clienttimeout = 10000 # after 10 seconds timeout<br />
clienttimeout = 10 # timeout after 10 milli-seconds! (see Tip below)<br />
clienttimeout = 8 # timeout after 8000 milli-seconds (= 8 seconds), see Tip below<br />
Default:<br />
clienttimeout = 5000 # timeout after 5000 milli-seconds (=5 seconds)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Values < 10 (so 1 to 9) are multiplicated with 1000, so a "5" results in 5000 ms.<br />
<br />
===== clientmaxidle =====<br />
{{Optional/en}}<br />
<br />
value for client process being idle before disconnect in seconds<br />
<br />
Example:<br />
clientmaxidle = 200 # Disconnect after 200 seconds<br />
= 0 # idle disconnect disabled<br />
<br />
Default:<br />
clientmaxidle = 120 # Disconnect after 120 seconds<br />
<br />
===== suppresscmd08 =====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35[cs3.57x]-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
==== fallbacktimeout ====<br />
{{Depends/en}}<br />
<br />
At several readers (see Chapter [reader] in oscam.server) one reader can be defined to them, for example in case of failure of the other readers, the traffic falls back.<br />
Maximum waiting time of the [[Cardserver]]s in milliseconds for primary [[Reader]], before [[Fallback]]-Reader (if any!) are questioned.<br />
<br />
Example:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The value must be greater than the value in "serialreadertimeout", otherwise the default is used.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = milliseconds <br />
<br />
time falling back to CAID restricted fallback reader, default: 2500<br />
<br />
<br />
<br />
==== sleep ====<br />
{{Optional/en}}<br />
<br />
time waiting for inactive users in minues, can be overwritten per user in oscam.user<br />
<br />
Example:<br />
sleep = 5 # waiting time 5 minutes<br />
<br />
Default:<br />
sleep = # [blank] no waiting time<br />
<br />
==== serverip ====<br />
{{optional/en}}<br />
<br />
Bind service to specified IP-address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam listen to all IP's<br />
<br />
==== bindwait ====<br />
{{Optional/en}}<br />
<br />
value in seconds to wait for bind request to complete. If OSCam within this time can not bind, he finished with "Bind Request failed".<br />
<br />
Causes may include:<br />
* Double assignment of ports<br />
* "crashed" OSCam has not released the ports again<br />
* OSCam was started serveral times while<br />
<br />
Example:<br />
bindwait = 20 # waiting time 20 seconds<br />
<br />
Default:<br />
bindwait = 120 # waiting time 120 seconds<br />
<br />
==== netprio ====<br />
{{Optional/en}}<br />
<br />
network priority - This sets the value of SO_PRIORITY on network connections. Basically this leads to setting the TOS fields of the sent IP packages so that QoS can be better used.<br />
<br />
Beispiel:<br />
netprio = 1 # Priority 1<br />
<br />
Default:<br />
netprio = 0 # system given<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional/en}}<br />
<br />
set mode for DNS resolving: These are different libc calls to resolve dns names and some older systems have problems with the newer implementation ''getadressinfo'' (getadressinfo is also threadsafe whereas ''gethostbyname'' is not and thus it has some locks around) or have stripped them from their images (dbox2 was such a candidate I think) even though it is available at compile time. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Example:<br />
resolvegethostbyname = 1 # gethostbyname<br />
<br />
Default:<br />
resolvegethostbyname = 0 # adressinfo system given<br />
<br />
==== failbantime ====<br />
{{Optional/en}}<br />
<br />
time for IP based blocking for clients with an invalid login attempt in minutes<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP will be blocked for 5 minutes. New logins are denied.<br />
# no clientthread will be created.<br />
<br />
Default:<br />
failbantime = 0 # failban off (default)<br />
<br />
==== failbancount ====<br />
{{Optional/en}}<br />
<br />
Failbancount = Number of allowed failed attempts with incorrect data <br />
= 0 (default) IP is now blocked on the first try with incorrect data!<br />
<br />
If within '''failbantime''' more than in '''failbancount''' allowed trials to be registered, the IP for the remainder failbantime is locked. After a period of failbantime are again full failbancount available. Failbancount is thus a relaxation of rules!<br />
<br />
==== dropdups ====<br />
{{Optional/en}}<br />
<br />
mode for duplicate client connections<br />
<br />
0 = mark client as duplicate, but don't disconnect them (default)<br />
1 = drop duplicate connections instead of marking as duplicate<br />
<br />
==== unlockparental ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7289:08/27/2012</span><br />
<br />
'''Only Seca and Viaccess'''<br />
<br />
unlock parental mode option to disable pin code request for adult movie.<br />
In order to work properly, this option may required that you define the card PIN code in your card reader configuration.<br />
<br />
Example:<br />
unlockparental = 1 # parental lock mode disabled<br />
<br />
Default:<br />
unlockparental = 0 # parental lock mode enabled<br />
<br />
==== double_check ====<br />
{{Optional/en}}<br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other, lb_nbest_readers must be set to 2 or higher<br />
<br />
Example:<br />
double_check = 1 # on<br />
<br />
Default:<br />
double_check = 0 # off<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|first two digits of CAID1],[CAID2|first two digits of CAID2]... <br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other for defined CAID or first two bytes of CAID, lb_nbest_readers must be set to 2 or higher, default:none <br />
<br />
<br />
<br />
==== Loadbalancer ====<br />
<br />
===== lb_mode =====<br />
{{Optional/en}}<br />
<br />
'''loadbalance mode'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If load balancing is activated here, it may in oscam.server among services and ident are '''no entries'''!<br />
<br />
If there are 2 or more of the same SC, the load can be distributed evenly on the cards. For more see [[OSCam/en/Loadbalancing|Loadbalancing]]<br />
<br />
Example:<br />
lb_mode = 0 loadbalance disabled, ECMs go to all readers<br />
lb_mode = 1 fastest reader first, after 5 ECMs the reader with the fastest response time will be selected<br />
lb_mode = 2 oldest reader first, reader with the longest no answer<br />
lb_mode = 3 lowest usage level, the usage level will be calculated by the sum of 5 ECMS response times, the higher a reader is busy, the higher is usage level<br />
lb_mode = 10 LB is switched off, but statistics are build<br />
<br />
<br />
Default:<br />
lb_mode = 0 # disabled<br />
<br />
===== lb_save =====<br />
{{Optional/en}}<br />
<br />
Save autoloadbalance statistics (counts). To save CPU power a minimum counts of 100 is recommended.<br />
<br />
Example:<br />
lb_save = 100 # counts of ECM's after statistics are saved<br />
<br />
Default:<br />
lb_save = 0 # no svae<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional/en}}<br />
<br />
set count of best readers for loadbalancing.<br />
<br />
Example:<br />
lb_nbest_readers = 2 # requests always go to two reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # requests go to one reader<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional/en}}<br />
<br />
set count of fallback readers for loadbalancing<br />
<br />
Example:<br />
lb_nfb_readers = 2 # two fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1 # one fallbackreader<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mode:<br />
= 0 # standard late reopening of blocker readers (default)<br />
= 1 # fast reopening of blocker readers<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5893:08/19/2011</span><br />
<br />
Set count of best readers per CAIDs for loadbalancing, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
<br />
lb_nbest_percaid = # number<br />
= [blank] # none (default)<br />
<br />
example: <br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wiil be blocked until statistics has been cleaned<br />
1 = default<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = force reopening immidiatly all failing readers if no matching was found<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional/en}}<br />
<br />
minimal ECM count to evaluate loadbalancing values<br />
<br />
Example:<br />
lb_min_ecmcount = 2 # 2 counts<br />
<br />
Default:<br />
lb_min_ecmcount = 5 # 5 counts<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional/en}}<br />
<br />
Maximum ECM count before resetting loadbalancing values.<br />
<br />
Example:<br />
lb_max_ecmcount = 200 # 200 counts<br />
<br />
Default:<br />
lb_max_ecmcount = 500 # 500 counts<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional/en}}<br />
<br />
time in seconds between retrying failed readers/CAIDs/providers/services<br />
<br />
Example:<br />
lb_reopen_seconds = 500 # retry after 500 seconds<br />
<br />
Default:<br />
lb_reopen_seconds = 900 # retry after 900 seconds<br />
<br />
===== lb_retrylimit =====<br />
{{Optional/en}}<br />
<br />
Retry next readers '''only''' if response time is higher then lb_retrylimit in '''milli seconds'''.<br />
<br />
Example:<br />
lb_retrylimit = 500 # retry next reader only, if response time is higher than 500 ms<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
===== lb_savepath ===== <br />
{{Optional/en}}<br />
<br />
Filenanme for saving loadbalancing statistics<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional/en}}<br />
<br />
hours after the loadbalancing statistics will be deleted<br />
<br />
default = 336<br />
<br />
===== lb_use_locking =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6166:12/28/2011</span><br />
<br />
disable parallel and identical ECM requests<br />
<br />
<br />
1 = on<br />
0 = off # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* You should choose this option only if:<br />
** slow system<br />
** high load<br />
** the same ECM requests come not from the cache, but will continue to the confirmed reader.<br />
<br />
* Adventages, if activated:<br />
** By synchronizing, an ECM request made by one. The identification of cache or request and assignment of the reader by loadbalancer is always successful.<br />
<br />
* Disadventages, if activated:<br />
** The synchronisation prevents multithreading and the probability of higher response times.<br />
<br />
* Adventages, if NOT activated:<br />
** Faster transit times for ECM requests<br />
<br />
* Disadventages, if NOT activated:<br />
** May have dual (n-fold) possible requests to the readers.<br />
<br/><br />
<br />
===== lb_retrylimits =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn:5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,Caid2:time2]...<br />
<br />
loadbalancing retry limit time per CAID in milliseconds, wilcard CAIDs with 2-digit Caids possible<br />
<br />
default = none<br />
<br />
example: <br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
ignore provider information CAIDs to reduce statistic date, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
example: <br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
default = none<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # enable automatic timeout based on load balancing statistics<br />
= 0 # default<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = percent<br />
<br />
percent added to average time as timeout time<br />
default = 30<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = milli seconds<br />
<br />
minimal time added to average time as timeout time<br />
default = 300<br />
<br />
===== lb_max_readers =====<br />
{{Optional/en}}<br />
<br />
lb_max_readers = limit (number)<br />
<br />
restrict the reader count to limit during learning<br />
<br />
0 = unlimited (default)<br />
x = restrict loadbalancer readers to limit x (number)<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional/en}}<br />
<br />
lb_auto_betatunnel = 0|1<br />
<br />
enable automatic Betacrypt tunneling for CAIDs 1801, 1833, 1834 and 1835 in loadbalancing mode<br />
lb_auto_betatunnel = 0 # disabled<br />
= 1 # enabled (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Betacrypt definition in oscam.user with betatunnel will be prefered [[streamboard:wiki/OSCam/en/Config/oscam.user#betatunnel|User-Betatunnel]]!<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
set mode for automatic Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only) <br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = number<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = always Betacrypt<br />
105 = represents the middle<br />
200 = always Nagravision<br />
<br />
=== Monitor ===<br />
'''Only if monitor is used!'''<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
==== port ====<br />
{{Optional/en}}<br />
UDP port for monitor<br />
port = 0 # monitor disabled<br />
= # port number<br />
<br />
Beispiel:<br />
port = 24480 # monitor on, port = 24480<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
serverip = # IP adress<br />
= # [blank] all IP's (default)<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured monitor connection<br />
[,IP address|IP address range]...<br />
<br />
Possible<br />
* one or more IP adresses<br />
* one or more IP adress ranges<br />
* mixture of IP adresses and IP adress ranges<br />
<br />
Example<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 and IP range 192.168.0.0 to 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] no secured monitor connection<br />
<br />
==== aulow ====<br />
{{Optional/en}}<br />
<br />
time no EMM occurs so that client is set to low in minutes<br />
<br />
Example<br />
aulow = 30 # After 30 minutes whithout EMM client will be switched from "active" to "on" (default).<br />
<br />
==== monlevel ====<br />
{{Optional/en}}<br />
<br />
monitor-level<br />
0 = no access to monitor (default)<br />
1 = only server and own procs<br />
2 = all procs, but viewing only<br />
3 = all procs, reload of oscam.user possible<br />
4 = complete access<br />
<br />
Example<br />
monlevel = 4 # complete access<br />
<br />
monlevel can be overwritten per user in oscam.user!<br />
<br />
==== appendchaninfo ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8546:03/13/2013<br />
</span><br />
<br />
Append channel name on log messages. Very useful when using [webif]!<br />
appendchaninfo = 1 # append chanel name<br />
= 0 # no append chanel name (default)<br />
<br />
=== lcd ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
==== lcd_outputpath ====<br />
{{Optional/en}}<br />
<br />
Path for LCD output<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
==== lcd_hideidle ====<br />
{{Optional/en}}<br />
<br />
hide reader in LCD output if reader idle > 20 seconds, default:0 <br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional/en}}<br />
<br />
LCD refresh interval (minimum 5), default:10<br />
<br />
=== WebIf ===<br />
'''Only if WebIf is used!'''<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
==== File format to send EMMs via the webinterface ====<br />
(by Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention'''<br />
<br />
* File has to be in TXT format.<br />
* The EMM-file should contain each PRE-CAM EMM in a new line.<br />
* EMMs should be in HEX representation.<br />
** Example: AABBCCDD...<br />
*Spaces and tabs between the bytes are allowed:<br />
**AA BB CC DD...<br />
*The HEX representation of each EMM's byte can be represented by upper or lower case - even mixed is allowed:<br />
**AA aa Aa aA...<br />
*Other chars and comments are not allowed.<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
<br />
default is 8888 if no httpport is set<br />
port for web interface,<br />
0 = disabled, praefix + = enable SSL<br />
<br />
Example<br />
httpport = 83 # Webinterface listening on '''http-port 83'''<br />
= +83 # Webinterface listening on '''https-port 83''' (SSL)<br />
0 # Webinterface disabled<br />
<br />
==== httpcert ====<br />
{{Optional/en}}<br />
<br />
file for http SSL certificate<br />
httpcert = oscam.cert # (look there)<br />
= # [blank] file oscam.pem (embedded) is used<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
example<br />
httpforcesslv3 = 0 none (default)<br />
= 1 force using SSLV3<br />
<br />
==== httpuser ====<br />
{{Optional/en}}<br />
<br />
Username for password protection. [blank] is default, of which is strongly discouraged! <br />
httpuser = # xyxyxy (all characters and figures are allowed)<br />
<br />
==== httppwd ====<br />
{{Optional/en}}<br />
<br />
Password for password protection. It is the same as for httpuser.<br />
httppwd = # 123456<br />
<br />
'''The ''user'' and ''pwd'' parameters are queried when connecting to the webinterface in a messagebox. If they are missing ore corrupted a message ''Forbidden'' appears and the connection is aborted!'''<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6625:05/15/2012</span><br />
<br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Do not add the content of the embedded CSS before the content of the custom CSS (default)<br />
1 # embedded CSS will be added before external custom CSS (specified by the [[#httpcss|httpcss]] parameter)<br />
<br />
This parameter can be used to override the embedded CSS with custom styles. To see the current CSS styles use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
==== httpcss ====<br />
{{Optional/en}}<br />
<br />
path for external CSS file<br />
<br />
For webinterface different styles are available. Put custom CSS files (ending with .css extension) in the oscam config directory to managed your custom styles with WebIf.<br />
<br />
Example<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] embedded style is used (default)<br />
<br />
To see the current CSS style, use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
Styles you find here: [[Streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
==== httptpl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7083:06/25/2012</span><br />
<br />
path for external templates and picons<br />
httptpl =<br />
= # [blank] No external templates<br />
<br />
path for external templates and picons, multiple simultaneously templates and picons are possible by creat‐ <br />
ing sub folders (maximum length of 32 alphanumeric characters), sub folders naming is corresponding to sub <br />
folder in URL, default:none <br />
<br />
example <br />
httptpl = /this/is/my/path <br />
<br />
folder with multiple templates: <br />
/this/is/my/path/template<br />
/this/is/my/path/template2 <br />
<br />
valid URLs: <br />
http://host:port/template1 <br />
http://host:port/template2<br />
<br/><br />
<br/><br />
==== httpoverwritebakfile ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = overwrite backup configurations files (*.bak)<br />
0 = default<br />
<br/><br />
<br/><br />
<br />
<br />
<br />
==== httplocale ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
set the "locale environment"<br />
<br />
default = blank [none]<br />
<br />
look here::<br />
<br />
http://en.wikipedia.org/wiki/locale<br />
<br />
==== httpjscript ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
path for oscam.js javascript, def: none<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional/en}}<br />
<br />
status refresh in seconds<br />
<br />
httprefresh = 7 # status will be refreshed after 7 seconds<br />
= # [blank] no refreshing<br />
<br />
==== httppollrefresh ====<br />
{{Optional/en}}<br />
<br />
refreshtime for polling in seconds<br />
<br />
httppollrefresh = 60 # polling will be refreshed after 60 seconds<br />
= # [blank|0] no refreshing poll<br />
<br />
==== httpshowpicons ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # show picons in userlist<br />
0 # default<br />
<br />
If this parameter is enables, then a new column is added to the USERS tab which display the picons of the last watched channels by active users. The folder where the picons must be configured in the httppiconpath.<br />
<br />
Possible format are:<br />
IC_caid_srvid.tpl<br />
IC_caid_provid_srvid.tpl<br />
IC_servicename.tpl<br />
<br />
added support for picons by channel name<br /><br />
syntax is:<br /><br />
take service-name from oscam.srvid,<br /><br />
replace all upper-case letters with lower case,<br /><br />
replace * with star,<br /><br />
replace & with and,<br /><br />
replace + with plus,<br /><br />
remove everything but a-z and 0-9,<br /><br />
if the result is name, the picon file will be IC_name.tpl<br /><br />
for example:<br /><br />
service-name "BBC-ONE +HD"<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
if service-name ends with hd, and picon is not found, fallback to name without hd, example:<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
-> not found, search for:<br /><br />
picon file: "IC_bbconeplus.tpl"<br /><br />
<br />
==== httphideidleclients ====<br />
{{Optional/en}}<br />
<br />
Enables hiding clients after idle time set with parameter ''' hideclient_to''' in section [monitor].<br />
httphideidleclients = 1 # hide<br />
= 0 # hide not (default)<br />
<br />
==== hideclient_to ====<br />
{{Optional/en}}<br />
<br />
Time to hide clients in the monitor if not sending requests. See also parameter '''httphideidleclienst''' in section [webif].<br />
hideclient_to = 1 # hide clients<br />
= 0 # no hide<br />
<br />
==== httphidetype ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
type = letter which defines types to hide in web interface status page (see Typ column), <br />
default: none. s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
==== httpscript ====<br />
{{Optional/en}}<br />
<br />
Path to an executable script which you wish to start from web interface<br />
httpscript = # path<br />
= # [blank] no path<br />
<br />
You can run script file from script.html (SCRIPTS item in main menu)<br /><br />
If the script file contains the "echo" will be it displayed in a Web interface.<br />
<br />
If the file can not run displays<br />
[Error]: Script "name_of_script.sh" not executable!<br />
<br />
If does not exist script displays<br />
[Error]: Script "name_of_script.sh" not found!<br />
(Works If you delete the script and refresh page)<br />
<br />
==== httpallowed ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8842:08/17/2013</span><br />
<br />
http web interface connections allowed. [blank] is allowed (default), but that makes no sense! If the webinterface to be used, then there must be a way to connect with him. Therefore we declare this parameter as '''mandatory'''!<br />
<br />
With '''::1''' OSCam decides to resolve 'localhost' to '''IPv6'''!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
<br />
<br />
Example<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host and range 192.168.0 are allowed<br />
resolving to IPv6<br />
<br />
'''default values'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1<br />
<br />
==== httpdyndns ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6558:03/21/12</span><br />
<br />
http web interface connections allowed<br />
<br />
httpdyndns = hostname [,hostnahme][,hostname]<br />
<br />
Example<br />
httpdyndns = host1.example.com,host2.example.com<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional/en}}<br />
<br />
write config:<br />
0 = all not empty parameters, all not default parameters, all parameters not containing the same value as the same parameter in global configuration (default)<br />
1 = all parameters<br />
<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional/en}}<br />
<br />
read only modus for web interface<br />
<br />
httpreadonly = 1 # only read<br />
= 0 # all is possible (default)<br />
<br />
<br />
==== httppiconpath ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9463/01/28/2014</span><br />
<br />
httppiconpath = path<br />
<br />
path to picons, default [blank] none<br />
<br />
====httphelplang====<br />
{{required}}<br />
<br />
set right language for wiki entry point<br />
de|en|fr <available wiki languages><br />
<br />
==== httposcamlabel ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
set individual label in web interface header, default: OSCam<br />
<br />
==== http_status_log ====<br />
{{Optional/en}}<br />
<br />
http_status_log = 0|1<br />
1 = display log in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowreaderinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowreaderinfo = 0|1<br />
1 = display readers informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowecminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowecminfo = 0|1<br />
1 = display readers and users ECM informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowuserinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowuserinfo = 0|1<br />
1 = display users informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowcacheexinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowcacheexinfo = 0|1<br />
1 = display CacheEX informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowmeminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowmeminfo = 0|1<br />
1 = display memory usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowloadinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowloadinfo = 0|1<br />
1 = display load average and CPU usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
<br/><br />
<br/><br />
<br />
=== [cache] ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW since svn 8358:02/16/2013</span><br />
<br />
{{OSCamConfCacheParameter}}<br />
<br />
<br />
==== delay ====<br />
{{optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
==== max_time ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
==== max_hit_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8910:09/10/2013</span><br />
<br />
max_hit_time = in seconds<br />
<br />
maximum time for cache exchange hits resists in cach for evaluating wait_time, default: 15<br />
<br />
<br />
<br />
==== wait_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 8077:01/06/2013</span><br />
<br />
wait_time = milli-seconds<br />
= [blank] none (default)<br />
<br />
wait time for cache exchange (mode 2 & 3 only!)and Cardserverproxy before sending ECM to reader or proxy<br />
<br />
Example:<br />
0:50:250,0200@00009X:50:150:950,0500@000001:150:1602&ffdf:1200<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional/en}}<br />
<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode:<br />
specify behaviour for counter parameter<br />
<br />
0 = when wait_time expires, serve highest counter's cw got anyway, even if no counter reached.<br />
1 = never serve cw (coming from cacheex) stored in cache if its counter not reaches counter. When wait_time expires, requests<br />
will go to normal readers! Only when a cw reaches counter, it can be served to clients.<br />
<br />
Default = 0<br />
<br />
<br />
* counter:<br />
set minimum cw counter to allow cw is used.<br />
<br />
Default = 1 (use default behaviour: use cw with highest counter when cache is checked)<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = allow bad cycles from a fixed fallback reader. Default = 0<br />
<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== csp_port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
This is a UDP ('''not TCP''') listen port for incoming traffic from csp nodes<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
==== csp_serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
This is the local bind IP of csp_port (see above!)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 disable (default)<br />
= 1 enable<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: not for all NDS SC's!'''<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID enabled for CW cycle check, default: none<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = count<br />
<br />
maximum CW cycle list entries, default = 500, maximum = 4000<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = minutes<br />
<br />
minimum time a learned cycletime resists in memory, default = 0, maximum = 15<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = log bad CW cycle only <br />
1 = drop bad CW cycle (default)<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, <br />
1 = drop old CW cycle, <br />
0 = no drop(default)<br />
<br/><br />
==== cwcycle_sensitive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (or more) same bytes and drop new CW<br />
3 = 3 (or more) same bytes and drop new CW<br />
4 = 4 (or more) same bytes and drop new CW<br />
<br />
<br/><br />
==== cwcycle_usecwcfromce ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = use CW Info from cache exchange<br />
0 = default<br />
<br/><br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
answer when cache exchange timeount expires, if no normal readers are vavailable for sending ECM's::<br />
<br />
0 = immediatly send '''not found''' to client (default)<br />
1 = wait for cache exchange answer until client timeout expires<br />
<br />
<br/><br />
<br/><br />
<br />
<br/><br />
<br />
=== csp (UDP) ===<br />
Section only needed if using cache exchange<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:02/16/2013 look at '''[cache]'''!</span><br />
<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6124:12/23/2011</span><br />
<br />
UDP listen port for incoming traffic from csp nodes<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
==== serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6124:12/23/2011</span><br />
<br />
Local bind IP of the above udp port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
=== Camd 33 (TCP) ===<br />
Section required only if camd33 will be used as client protocol!<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for camd 3.3x clients, 0 = disabled, default:0<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # listenig to all<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured camd 3.3x client connection<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
Example:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt = [none]<br />
<br />
==== passive ====<br />
{{Optional/en}}<br />
<br />
force passive camd 3.3x client<br />
<br />
Camd3.3x protocol generally has aktive clients. In certain circumstances the client must switched on only "passive" mode.<br />
<br />
Example:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
==== key ====<br />
{{Optional/en}}<br />
128 bit key<br />
<br />
key for camd 3.3x client encryption<br />
<br />
<br />
Example:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key = # (blank] none (default)<br />
<br />
=== cs357x (UDP) ===<br />
Section required only if cs357x will be used as client protocol! These protocols principle encrypt and build the key from user name.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''cs357x''' was also known as '''camd35''' designated. Both terms mean the same protocol with the same functions and parameters. In the future, to avoid confusion '''only cs357x''' is used.<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
UDP port for camd 3.5x|cs357x clients. Port must be opened at router!<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35|cs3.57x-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== cs378x (TCP) ===<br />
Section required only if cs378x (camd 3.5x in TCP) will be used as client protocol!<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
Port(s) TCP for Cs378x clients (camd 3.5x in TCP mode). Port(s) must be opened at router!<br />
<br />
port@CAID[:ident][,ident]...[;port@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@0500:030B00;22764@0648<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell cs3.78x clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disable<br />
<br />
<br />
Mor here: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== Newcamd (TCP) ===<br />
Section required only if newcamd will be used as client protocol!<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
==== key ====<br />
{{required}}<br />
DES key<br />
Default key for newcamd client encryption.<br />
<br />
Example:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
==== port ====<br />
{{required}}<br />
TCP port/DES key/CAID/ident definitions. Each CAID requires a separate port. If you don't specify a DES key for a port, the default DES Key will be used!<br />
<br />
port[{DES key}]@CAID[:ident][,ident]...[;port[{DES key}]@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@1234:000000 # (CAID 1234 connected with port 15000)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 connected with port 15000. CAID 5678 with port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = [blank]<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
!! Dyn DNS Addresses are not forseen here and won't work !!<br />
<br />
Example:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed = [blank]<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<br />
Example:<br />
keepalive = 1 # (enabled)<br />
keepalive = 0 # (disabled)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
==== mgclient ====<br />
{{Optional/en}}<br />
<br />
Enable mgcamd extended newcamd protocol, allowing for a single connection to work with mutliple providers, default:0<br />
<br />
Example:<br />
mgclient = 1 # (enabled)<br />
mgclient = 0 # (disabled)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br/><br />
<br/><br />
=== '''scam''' ===<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9878:09/29/2014</span><br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port = port<br />
<br />
UDP port for scam server, default = 0<br />
<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br/><br />
<br/><br />
<br />
=== Radegast ===<br />
Section required only if radegast will be used as client protocol!<br />
<br />
{{OSCamConfRadegastParameter}}<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for radegast clients (enables radegast)<br />
port =<br />
= 0 (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br />
==== user ====<br />
{{required}}<br />
<br />
user name for radegast client<br />
user = username<br />
<br />
=== Serial ===<br />
Section required only if seral interface will be used!<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
==== device ====<br />
{{Optional/en}}<br />
<br />
Parameter of device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = name of Serial Device<br />
option = timeout = milli seconds timeout for connection default: 50<br />
= delay milli seconds additive between 2 characters<br />
<br />
supported serial devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
=== Cccam (TCP) ===<br />
Section required only if Cccam will be used as client protocol!<br />
{{OSCamConfCccamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6206:01/07/2012</span><br />
<br />
Port = 0|port[,port...]<br />
<br />
TCP/IP-Ports for CCcam clients, enables Cccam protocol!<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled (default)<br />
<br />
==== version ====<br />
{{Optional/en}}<br />
<br />
<br />
define CCcam version, minimum CCcam version 2.0.11, used with original CCcam only, default:none<br />
<br />
<nowiki><main version>,<version>,<sub version></nowiki><br />
<br />
Example:<br />
version = 2.0.11<br />
<br />
==== reshare ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
reshare level for CCcam clients:<br />
-1 = no resharing<br />
0 = resharing for direct peer only<br />
1 = resharing for direct peer and next level<br />
x = resharing for direct peer and next x level (x for number of level)<br />
10 = (default)<br />
<br />
Example:<br />
reshare = 1 resharing only for direct peer and next level<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
==== reshare_mode ====<br />
{{Optional/en}}<br />
<br />
CCcam reshare mode<br />
0 = reader reshares only received SCs for CCcam readers,<br />
defined filters/CAIDs/idents on other readers (default)<br />
1 = reader reshares received SCs (like=0) and defined services<br />
2 = reader reshares only defined reader services as virtual SCs<br />
3 = reader reshares only defined user services as virtual SCs<br />
4 = reader reshares only received cards<br />
<br />
Every server is shared as hop=0 and with defined reshare values.<br />
<br />
Service reshare only works if positive services defined: no service - no reshare!<br />
<br />
==== ignorereshare ====<br />
{{Optional/en}}<br />
<br />
<br />
CCcam reshare setting:<br />
0 = use reshare setting of server (default)<br />
1 = use reshare setting of reader or user<br />
<br />
Example:<br />
ignorereshare = 1 reshare settings of reader or user are used<br />
<br />
==== stealth ====<br />
{{Optional/en}}<br />
<br />
Behaviour like the original CCcam: no activate partner detection and extended OSCam-CCcam protocol, prevent other OSCam to detect the server as OSCam server.<br />
<br />
stealth = 1 # stealth enabled<br />
= 0 # stealth disabled (default)<br />
<br />
==== minimizecards ====<br />
{{Optional/en}}<br />
<br />
mode how to provide CCcam servers to CCcam clients:<br />
0 = no aggregation, remove duplicates only (default)<br />
1 = based on minimum hop: two SCs with different hops are summarized, new SCs get a smaller hop<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional/en}}<br />
<br />
<br />
interval to provide share list update to CCcam clients in seconds<br />
0 = update based on server updates, values <= 10 are invalid and will be set to 30 <br />
= [blank] 240 (default)<br />
<br />
==== keepconnected ====<br />
{{Optional/en}}<br />
<br />
set CCcam keepalive modus:<br />
0 = disconnect client when max idle time is reached<br />
1 = keep client connected (default)<br />
<br />
==== recv_timeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7672:10/09/2012</span><br />
<br />
recv_timeout = milli-seconds<br />
<br />
set network timeout for receiving data<br />
default = 2000<br />
<br />
==== forward_origin_card ====<br />
{{Optional/en}}<br />
<br />
forward_origin_card = 0|1<br />
<br />
1 = forward ECM request to reader holding this card, loadbalancer, fallback and caching will be disabled <br />
0 = default<br />
<br />
==== nodeid ====<br />
{{Optional/en}}<br />
<br />
nodeid = ID<br />
<br />
set CCcam node ID in hex, default:none<br />
<br />
example<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br/><br />
=== Pandora ===<br />
{{OSCamConfPandoraParameter}}<br />
<br />
==== pand_skip_send_dw ====<br />
<br />
<br />
pand_skip_send_dw = dummy<br />
<br />
<br />
==== pand_allowed ====<br />
<br />
<br />
pand_aloowed = dummy<br />
<br />
<br />
==== pand_usr ====<br />
<br />
<br />
pand_user = dummy<br />
<br />
<br />
==== pand_pass ====<br />
<br />
<br />
pand_pass = dummy<br />
<br />
<br />
==== pand_ecm ====<br />
<br />
<br />
pand_ecm = dummy<br />
<br />
<br />
==== pand_port ====<br />
<br />
<br />
pand_port = dummy<br />
<br />
<br />
==== pand_srvid ====<br />
<br />
pand_srvid = dummy<br />
<br />
<br/><br />
<br/><br />
<br />
=== GBox ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
{{OScamConfGboxParameter}}<br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 {3 3}}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== hostname ====<br />
{{required}}<br />
<br />
hostname = my IP or ddns<br />
<br />
examples:<br />
hostname = 192.168.1.120<br />
hostname = willy.noip.org<br />
<br />
<br/><br />
<br />
==== my_password ====<br />
{{required}}<br />
<br />
my_password = 4 hex bytes, 8 chara<br />
<br />
example:<br />
my_password = 98AF3E25<br />
<br />
<br/><br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port= define incoming UDP port(s) used by Gbox protocol<br />
<br />
port= port#1[[,port#2]...[,port#32]]<br />
<br />
Maximum 32 ports.<br />
<br />
<br/><br />
<br />
==== proxy_card ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy reader card(s) to be reshared into gbox network, default = none<br />
<br />
proxy_card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
example:<br />
<br />
proxy_card = 18300000,0D950400,05050F00 <br />
<br />
<br/><br />
<br />
==== ccc_reshare ====<br />
{{Optional/en}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = enable cccam-cards to be reshared into gbox network, default = 0 (global setting)<br />
<br />
- note: set up caids to be reshared in 'ccc_gbx_caid ='<br />
<br />
- unique peer reshare level to be set in oscam.server [reader]-> cccam_reshare<br />
<br />
<br/><br />
<br />
==== ccc_gbx_caid ====<br />
{{Optional/en}}<br />
<br />
ccc_gbx_caid = caid_1,caid_2,...<br />
<br />
- note: ccc_reshare must be set as well<br />
<br />
<br/><br />
<br />
==== my_vers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9645:04/09/2014</span><br />
<br />
<br />
my_vers = version<br />
<br />
set gbox version hexadecimal low byte<br />
<br />
default = 2A<br />
<br />
<br/><br />
<br />
==== my_cpu_api ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9712:05/11/2014</span><br />
<br />
<br />
my-cpu_api = byte<br />
<br />
set gbox CPU and API byte in hexadecimal, default = 40<br />
default = 40<br />
<br />
<br/><br />
<br />
==== gbox_reconnect ====<br />
{{Optional/en}}<br />
<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min:60, max:300<br />
<br />
<br/><br />
<br />
==== accept_remm_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11399:29/01/2018</span><br />
<br />
Accept to send Remote EMMs to specified Server Peer-IDs<br />
<br />
accept_remm_peer = peer#1[[,peer#2]...[,peer#8]]<br />
<br />
<br/><br />
<br />
==== dis_attack_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11360:16/02/2017</span><br />
<br />
Disable creation of attack.txt<br />
<br />
dis_attack_txt = 0|1 - default: 0 <br />
<br />
<br/><br />
<br />
==== log_hello ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11231:20/04/2016</span><br />
<br />
Display hello messages in debug log<br />
<br />
log_hello = 0|1 - default: 1 <br />
<br />
<br/><br />
<br />
==== ignore_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Ignore specific peer ID(s) totally. Login rejected.<br />
<br />
ignore_peer = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== block_ecm ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Block ECM for specific peer ID(s).<br />
<br />
block_ecm = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== tmp_dir ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/2014</span><br />
<br />
gbox tempory directory<br />
<br />
tmp_dir = /path/to/dir <br />
<br />
default: /tmp/.oscam<br />
<br />
<br/><br />
<br />
==== gsms_disable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9714:05/11/2014</span><br />
<br />
<br />
gsms_disable = 0|1<br />
<br />
0 - Gbox Short Message Service (GSMS) is enabled<br/><br />
1 - disable gbox short message service (GSMS)<br/><br />
<br />
default = 1<br />
<br />
<br/><br />
<br/><br />
<br />
==== gbox_save_gsms ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_save_gsms=0|1<br />
<br />
0 = don't save GSMS in configuration<br/><br />
1 = save all GSMS field in configuration<br />
<br />
You need to press save button to really save it!<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_type=0|1<br />
<br />
0 = normal text message<br/><br />
1 = normal text message + OSD (On Screen Display)<br />
<br/><br />
<br/><br />
<br />
==== gbox_dest_peers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_dest_peers = [BOXID[,BOXID]...[,BOXID]]<br />
<br />
Maximum 16 * 2 bytes (4 hexa digits), comma-separated. For broadcast to all use FFFF.<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_txt=Your text to send to peers.<br />
<br />
From 6 to 127 alphanumerical characters.<br />
<br/><br />
<br/><br />
<br />
=== DVBapi ===<br />
{{Optional/en}}<br />
<br />
Section required only if OSCam will also be used as client!<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional/en}}<br />
<br />
DVB API enabled<br />
<br />
Example:<br />
enabled = 0 # disabled (default)<br />
enabled = 1 # enabled<br />
<br />
==== user ====<br />
{{required}}<br />
user name for DVB API client<br />
Example:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
==== au ====<br />
{{Optional/en}}<br />
<br />
AU mode for dvbapi:<br />
au = 0 # disable AU (default)<br />
au = 1 # enable AU<br />
<br />
==== pmt_mode ====<br />
{{Optional/en}}<br />
PMT mode:<br />
pmt_mode = 0 # use camd.socket and PMT file (default)<br />
pmt_mode = 1 # disable reading PMT file<br />
pmt_mode = 2 # disable camd.socket<br />
pmt_mode = 3 # read PMT file on startup only<br />
pmt_mode = 4 # do not use signal handler for monitoring /tmp<br />
pmt_mode = 5 # do not use signal handler to monitor /tmp & disable camd.socket<br />
pmt_mode = 6 # use PMT server mode <span style="background-color:Green;color:White;padding:0 5px;">NEU - NEW - NOUVEAU - NUOVO svn8680:05/06/2013</span><br />
<br />
==== request_mode ====<br />
{{Optional/en}}<br />
CAID request mode:<br />
0 = try all possible CAIDs one by one (default)<br />
1 = try all CAIDs simultaneously<br />
<br />
==== listen_port ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP/IP port for SAT IP clients, filtering has to be done on client site<br />
<br />
0 = disabled (default)<br />
<br />
==== boxtype ====<br />
{{required}}<br />
set boxtype, auto detection of DVB API will be aspired:<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt|qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
ipbox with camd.socket support, currently only with PGI image version 0.6 or above, verified on HD models only<br />
<br />
ipbox-pmt can be used on any DGS based images (with or without camd.socket support), verified on HD models only<br />
<br />
pc is for generic pc support (currently supported on VDR with vdr-plugin-dvbapi)<br />
<br />
==== cw_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
cw_delay = milli-seconds<br />
<br />
delay of CW writing, default = none<br />
<br />
==== delayer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6808:05/14/2012</span><br />
<br />
delayer = milli-seconds<br />
<br />
minimum time to write CW<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
= 1 reopen demux devices in each channel switching,<br />
= 0 default<br />
<br />
==== decodeforever ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = trying to decode on all CAIDs<br />
0 = default<br />
<br />
==== ecminfo_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10722:06/13/15</span><br />
<br />
Define the type of ecm.info file to create, ecminfo_type = 0|1|2|3|4|5<br />
<br />
0 = default oscam syntax<br />
1 = default oscam syntax with ecmtime in ms instead of s<br />
2 = wicardd<br />
3 = mgcamd<br />
4 = cccam<br />
5 = camd3<br />
<br />
==== read_sdt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10766:06/15/15</span><br />
<br />
If it is not yet available, this option automatically add entries in your oscam.srvid2 (or oscam.srvid) and in your oscam.provid files. You need to stay '''more than 30 seconds''' on a channel for the auto-detect to start. So both channel name and provider name are retrieved. If entries already exist they are not changed nor updated, so you keep full control on the content of both files, only missing entries are added.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = disabled (default)<br />
1 = on, do not save FTA channels<br />
2 = on, save FTA channels<br />
<br />
==== write_sdt_prov ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10841:06/27/15</span><br />
<br />
First enable the read_sdt parameter then you can specify if the provider name is saved or not into the oscam.srvid2 or oscam.srvid file. This is not mandatory since the provider name is now retrieved automatically from the oscam.provid file.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = off, do not write provider name into oscam.srvid/2 (default)<br />
1 = on, write provider name into oscam.srvid/2<br />
<br />
=== Anticasc ===<br />
Section is needed if anticascading will be used to protect against unauthorized forwarding CardSharing. <br />
{{OSCamConfAnticascParameter}}<br />
<br />
==== enabled ====<br />
{{required}}<br />
<br />
enabled anti-cascading:<br />
enabled = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== numusers ====<br />
{{Optional/en}}<br />
anti-cascading: user per account (number)<br />
numusers = 0 # anticascading disabled (default)<br />
= 1 # cascading for 1 user allowed ==> (1*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 11 ecms allowed per minute<br />
= 2 # cascading for 2 users allowed ==> (2*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 17 ecms allowed per minute <br><br />
<span style="color:Blue;padding:0;5px"><B>10</B></span> = number you have put in oscam.ac. Default value is 10<br />
<br />
==== sampletime ====<br />
{{Optional/en}}<br />
duration of sample in minutes:<br />
sampletime = 5 # duration 5 minutes<br />
= # [blank] duration 2 minutes (default)<br />
<br />
Ex: numusers = 1 ==> 11 ecms * 5 minutes ==> 55 ecms allowed in 5 minutes <br />
numusers = 2 ==> 17 ecms * 5 minutes ==> 85 ecms allowed in 5 minutes<br />
<br />
==== samples ====<br />
{{Optional/en}}<br />
<br />
number of additionnal ecms allowed (possible values between 2 and 10)<br />
samples = 7 # 7 additional ecms allowed<br />
= # [blank] 10 additional ecms allowed (default)<br />
<br />
==== penalty ====<br />
{{Optional/en}}<br />
Level of the penalty if the user exceeds the result shown in Ex on Sampletime<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay ([[OSCam/en/Config/oscam.conf#fakedelay|fakedelay]])<br />
<br />
penalty can be overwritten per user in oscam.user<br />
<br />
==== aclogfile ====<br />
{{Optional/en}}<br />
file for anti-cascading logging<br />
aclogfile =<br />
= # [blank] no logfile (default)<br />
<br />
==== fakedelay ====<br />
{{Optional/en}}<br />
<br />
fake delay time in milli seconds (possible values between 100 and 3000)<br />
fakedelay = 500 # delay 500 milli seconds<br />
= # [blank] 1000 milli seconds (default)<br />
<br />
==== denysamples ====<br />
{{Optional/en}}<br />
<br />
How many samples should be penalized?<br />
denysamples = 10 # 10 samples will be penalized<br />
= # [blank] 8 Samples will penalized (default)<br />
<br/><br />
<br />
==== acosc_enabled ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br/><br />
acosc_enabled = 0|1<br />
1 = enable anticascading oder SIDs count<br />
0 = default<br />
<br/><br />
==== acosc_max_active_sids ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = count<br />
<br />
maximum activ SIDs with anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br />
<br/><br />
<br />
==== acosc_zap_limit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = count<br />
<br />
zap limit for anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
level of penalty with anticascading over SIDs count:<br />
<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = seconds<br />
<br />
penalty duration for anticascading over SIDs count:<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
==== acosc_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_delay = milliseconds<br />
<br />
delay for anticascading over SIDs count<br />
<br />
0 = unlimites (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
<br />
<br />
<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.conf&diff=13520
OSCam/en/Config/oscam.conf
2020-02-24T15:02:13Z
<p>Felixka: /* ccc_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
==oscam.conf==<br />
<br />
=== The [global] section ===<br />
<br />
The main configuration file for OSCam contains global parameters such as debugging, logging, monitor, protocols and anti-cascading. Sections in oscam.conf are nonrecurring. The [global] section is required. All other sections are optional.<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If a parameter is empty or is not listed in config-file, then apply the default values !<br />
<br />
==== nice ====<br />
{{Optional/en}}<br />
<br />
'''Systempriority'''<br />
<br />
OSCam requires almost no CPU-power. But if CPU-power is required, it should be available immediatly. Values between 20 and -20 are possible. 20 = low, -20 = very high. If this parameter is commented out (#), this function is not called. Important for example for dbox2[http://de.wikipedia.org/wiki/DBOX2], if the error messages "''relocation error:setpriority''". See [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Example:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
===== initial_debuglevel =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10705:06/11/15</span><br />
<br />
Set the debuglevel on startup.<br />
<br />
Example:<br />
initial_debuglevel = 8<br />
<br />
Default:<br />
initial_debuglevel = 0<br />
<br />
===== pidfile =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8176/01/24/2013</span><br />
<br />
pidfile = set pidfile, [blank] none (default)<br />
<br />
Change PID file name an path. If default = oscam.pid in /tmp<br />
<br />
Example:<br />
pidfile = /var/run/oscam.pid<br />
<br />
===== logfile =====<br />
{{optional/en}}<br />
<br />
Logging target<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
You can define a maximum of one filename (not more!) and additionally to log to stdout or syslog (you can also only log to stdout or syslog and omit the filename).<br />
<br />
Opportunities:<br />
<br />
logfile = /var/log/oscam.log # file or linux device (for example /dev/tty)<br />
logfile = syslog # log to syslogd <br />
logfile = stdout # showing the log on the console<br />
<br />
Example:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format logfile:<br />
CAID&ident/provider/length:checksum<br />
<br />
===== ecmfmt =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
define ECM log format, default:c&p/i/s/l:h <br />
<br />
possible variables: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and CCcam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , this ID will be replaced with the tier-description from oscam.tiers (if found)<br />
w = CW<br />
y = payload (short, 3 bytes)<br />
Y = payload (long, 6 bytes)<br />
<br />
<br />
use a value as prefix to hide variable with this value, control characters will be escaped by "\" <br />
<br />
example:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w HOP:j<br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn10048:11/30/2014</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs will be dropped, if CWs do not have an odd an even sample (default)<br />
1 = disabled<br />
<br />
===== loghistorysize =====<br />
{{optional/en}}<br />
<br />
loghistorysize = bytes<br />
<br />
size of log message history in web interface or monitor<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) #stage 2 is used only if '''preferlocalcards = 1''' was activated in [global] section. <br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
example<br />
<br />
P/2/2/2 or L/2/4/4<br />
<br />
===== maxlogsize =====<br />
{{required}}<br />
<br />
Here the maximum size of logfiles are set in KBytes. This is especially important for server with only a small amount of memory (dbox2). Therefore it is strongly recomended to determine carefully that size at such servers. Not infrequently a system "bursting" because the logfile uncontrolled large scale adopted!<br />
<br />
Example<br />
maxlogsize = 20 # Logfile reaches to 20 KBytes<br />
= 0 # Logfile '''unlimited'''<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile reaches to 10 KBytes (default)<br />
<br />
===== logduplicatelines =====<br />
{{optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8290/02/05/2013</span><br />
<br />
logduplicatelines = 0|1<br />
<br />
1 = disable detection of duplicate lines in log file<br />
0 = enable detection of duplicate lines in logfile = default<br />
<br />
===== disablelog =====<br />
{{optional/en}}<br />
<br />
switches logfile '''off'''<br />
1 = '''no log''' <br />
0 = '''log''' <br />
<br />
Example:<br />
disablelog = 1 # '''no''' log <br />
<br />
Default:<br />
disablelog = 0 # '''log'''<br />
<br />
===== cwlogdir =====<br />
{{Optional/en}}<br />
<br />
<br />
A path for cw logging can be configured here. The path is relative to the work directory and must exist. Otherwise no logs are created and no errors are reported. <br />
<br />
CWs (control words) are the answers of the card which decrypts a certain channel for some seconds before the next cw is transmitted. The CW log file can be used for delayed decoding of this channel. This is also called offline decoding. Watch this [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
Oscam creates a new *.cwl file for each channel and each day. The file name contains the date, service ID and service name, e.g. 110808_I000B_Sky_Cinema_+1.cwl with this contents:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
All cws are logged if at least one user watches the channel. Please choose a path with enough space, since per day and channel some 10KB of data are created. A script that moves/deletes the log files regularly is recommended.<br />
<br />
Example:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] no path for cw-log, logging disabled<br />
<br />
===== emmlogdir =====<br />
{{Optional/en}}<br />
<br />
Setting a path for emm-log. You can define with the "saveemm-*"-Parameters in oscam.server which EMMs should be logged.<br />
<br />
Example:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] the config folder will be used for emm logging<br />
<br />
===== usrfile =====<br />
{{Optional/en}}<br />
<br />
Set a name für userfile<br />
<br />
Format of the userfile: <br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Example:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
===== disableuserfile =====<br />
{{Optional/en}}<br />
<br />
Now it is crazy: Even if a logfile is switched on (see logfile), the userfile can be turned off!<br />
<br />
Example:<br />
disableuserfile = 1 # '''no''' userfile <br />
= 0 # '''userfile'''<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
===== usrfileflag =====<br />
{{Optional/en}}<br />
<br />
Setting the logging-modus<br />
0 = Only login and logout will be logged<br />
1 = Each zapping from client will be logged<br />
Default is 0<br />
<br />
Example:<br />
usrfileflag = 1 # All will be logged<br />
<br />
Default:<br />
usrfileflag = 0 # Only login und logout will be logged<br />
<br />
===== saveinithistory =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn7128:07/02/2012</span><br />
<br />
Save SC init history to /tmp/.oscam/reader<number>. Needed to show entitlements.<br />
<br />
Example:<br />
saveinithistory = 1 # save to /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # no save<br />
<br />
===== mailfile =====<br />
{{Optional/en}}<br />
<br />
mailfile = file<br />
<br />
define file saving NDS Videogard mail messages from provider. Default: [blank] none<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
delay in millisencons for asking cache exchange mode 1 readers, default: none<br />
<br />
===== disablemail =====<br />
{{Optional/en}}<br />
<br />
disablemail = 0|1<br />
<br />
disable saving NDS Videogard mail messages form provider. Default = 1 (disabled)<br />
<br />
===== sysloghost =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set remote syslog server will be activated. Messages will be sent to this IPv4 address. If not set remote syslog server not work.<br />
<br />
Example:<br />
sysloghost = 192.168.1.167<br />
<br />
===== syslogport =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set ''sysloghost'' remote syslog server will be activated. Messages will be sent to this port. If not set port 514 is used as default. <br />
<br />
Example:<br />
syslogport = 515<br />
<br />
Default:<br />
syslogport = 514<br />
<br />
==== Reader ====<br />
<br />
===== enableled =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
===== serialreadertimeout =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8541:03/13/2013</span><br />
<br />
'''Only using Serialreader!'''<br />
<br />
timeout for serial reader in milli-seconds<br />
<br />
Example:<br />
serialreadertimeout = 1200 # Timeout after 1200 milli-seconds<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout after 1500 milli-seconds<br />
<br />
===== waitforcards =====<br />
{{Optional/en}}<br />
<br />
wait for local SCs on startup before opening network ports<br />
<br />
Example:<br />
waitforcards = 0 # don't wait<br />
<br />
Default:<br />
waitforcards = 1 # wait<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional/en}}<br />
<br />
waitforcards_extra_delay = milli seconds<br />
<br />
additional delay in milli seconds after waiting for local SCs on startup before opening nework ports<br />
<br />
default = 500<br />
<br />
===== preferlocalcards =====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn9605:03/29/2014</span><br />
<br />
try decoding on local cards first<br />
<br />
Example:<br />
preferlocalcards = 0 # local cards are used like remote reader<br />
preferlocalcards = 1 # prefer CacheEx sources <br />
preferlocalcards = 2 # prefer local cards<br />
<br />
Default:<br />
preferlocalcards = 1 # prefer CacheEx sources<br />
<br />
===== readerrestartseconds =====<br />
{{Optional/en}}<br />
<br />
waiting time in seconds beetween restarts<br />
<br />
Example:<br />
readerrestartseconds = 10 # waiting time 10 seconds<br />
= 0 # '''no restarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # waiting time 5 seconds<br />
<br />
===== block_same_ip =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_ip = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same ip address, default = 1<br />
0 = no reject<br />
<br />
===== block_same_name =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_name = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same name, default = 1<br />
0 = no reject<br />
<br />
==== Cache ====<br />
<br />
===== cachedelay =====<br />
{{optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
===== max_cache_time =====<br />
<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
===== max_cache_count =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = count, default 1000<br />
<br />
maximum CWs in cache<br />
<br />
===== cacheexwaittime =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
maximum wait time for a cache entry in milli seconds, default:50 <br />
<br />
===== cacheexenablestats =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== Client ====<br />
<br />
===== clienttimeout =====<br />
{{Optional/en}}<br />
<br />
value in milli-seconds for client process to wait for key<br />
<br />
Examples:<br />
clienttimeout = 10000 # after 10 seconds timeout<br />
clienttimeout = 10 # timeout after 10 milli-seconds! (see Tip below)<br />
clienttimeout = 8 # timeout after 8000 milli-seconds (= 8 seconds), see Tip below<br />
Default:<br />
clienttimeout = 5000 # timeout after 5000 milli-seconds (=5 seconds)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Values < 10 (so 1 to 9) are multiplicated with 1000, so a "5" results in 5000 ms.<br />
<br />
===== clientmaxidle =====<br />
{{Optional/en}}<br />
<br />
value for client process being idle before disconnect in seconds<br />
<br />
Example:<br />
clientmaxidle = 200 # Disconnect after 200 seconds<br />
= 0 # idle disconnect disabled<br />
<br />
Default:<br />
clientmaxidle = 120 # Disconnect after 120 seconds<br />
<br />
===== suppresscmd08 =====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35[cs3.57x]-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
==== fallbacktimeout ====<br />
{{Depends/en}}<br />
<br />
At several readers (see Chapter [reader] in oscam.server) one reader can be defined to them, for example in case of failure of the other readers, the traffic falls back.<br />
Maximum waiting time of the [[Cardserver]]s in milliseconds for primary [[Reader]], before [[Fallback]]-Reader (if any!) are questioned.<br />
<br />
Example:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The value must be greater than the value in "serialreadertimeout", otherwise the default is used.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = milliseconds <br />
<br />
time falling back to CAID restricted fallback reader, default: 2500<br />
<br />
<br />
<br />
==== sleep ====<br />
{{Optional/en}}<br />
<br />
time waiting for inactive users in minues, can be overwritten per user in oscam.user<br />
<br />
Example:<br />
sleep = 5 # waiting time 5 minutes<br />
<br />
Default:<br />
sleep = # [blank] no waiting time<br />
<br />
==== serverip ====<br />
{{optional/en}}<br />
<br />
Bind service to specified IP-address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam listen to all IP's<br />
<br />
==== bindwait ====<br />
{{Optional/en}}<br />
<br />
value in seconds to wait for bind request to complete. If OSCam within this time can not bind, he finished with "Bind Request failed".<br />
<br />
Causes may include:<br />
* Double assignment of ports<br />
* "crashed" OSCam has not released the ports again<br />
* OSCam was started serveral times while<br />
<br />
Example:<br />
bindwait = 20 # waiting time 20 seconds<br />
<br />
Default:<br />
bindwait = 120 # waiting time 120 seconds<br />
<br />
==== netprio ====<br />
{{Optional/en}}<br />
<br />
network priority - This sets the value of SO_PRIORITY on network connections. Basically this leads to setting the TOS fields of the sent IP packages so that QoS can be better used.<br />
<br />
Beispiel:<br />
netprio = 1 # Priority 1<br />
<br />
Default:<br />
netprio = 0 # system given<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional/en}}<br />
<br />
set mode for DNS resolving: These are different libc calls to resolve dns names and some older systems have problems with the newer implementation ''getadressinfo'' (getadressinfo is also threadsafe whereas ''gethostbyname'' is not and thus it has some locks around) or have stripped them from their images (dbox2 was such a candidate I think) even though it is available at compile time. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Example:<br />
resolvegethostbyname = 1 # gethostbyname<br />
<br />
Default:<br />
resolvegethostbyname = 0 # adressinfo system given<br />
<br />
==== failbantime ====<br />
{{Optional/en}}<br />
<br />
time for IP based blocking for clients with an invalid login attempt in minutes<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP will be blocked for 5 minutes. New logins are denied.<br />
# no clientthread will be created.<br />
<br />
Default:<br />
failbantime = 0 # failban off (default)<br />
<br />
==== failbancount ====<br />
{{Optional/en}}<br />
<br />
Failbancount = Number of allowed failed attempts with incorrect data <br />
= 0 (default) IP is now blocked on the first try with incorrect data!<br />
<br />
If within '''failbantime''' more than in '''failbancount''' allowed trials to be registered, the IP for the remainder failbantime is locked. After a period of failbantime are again full failbancount available. Failbancount is thus a relaxation of rules!<br />
<br />
==== dropdups ====<br />
{{Optional/en}}<br />
<br />
mode for duplicate client connections<br />
<br />
0 = mark client as duplicate, but don't disconnect them (default)<br />
1 = drop duplicate connections instead of marking as duplicate<br />
<br />
==== unlockparental ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7289:08/27/2012</span><br />
<br />
'''Only Seca and Viaccess'''<br />
<br />
unlock parental mode option to disable pin code request for adult movie.<br />
In order to work properly, this option may required that you define the card PIN code in your card reader configuration.<br />
<br />
Example:<br />
unlockparental = 1 # parental lock mode disabled<br />
<br />
Default:<br />
unlockparental = 0 # parental lock mode enabled<br />
<br />
==== double_check ====<br />
{{Optional/en}}<br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other, lb_nbest_readers must be set to 2 or higher<br />
<br />
Example:<br />
double_check = 1 # on<br />
<br />
Default:<br />
double_check = 0 # off<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|first two digits of CAID1],[CAID2|first two digits of CAID2]... <br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other for defined CAID or first two bytes of CAID, lb_nbest_readers must be set to 2 or higher, default:none <br />
<br />
<br />
<br />
==== Loadbalancer ====<br />
<br />
===== lb_mode =====<br />
{{Optional/en}}<br />
<br />
'''loadbalance mode'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If load balancing is activated here, it may in oscam.server among services and ident are '''no entries'''!<br />
<br />
If there are 2 or more of the same SC, the load can be distributed evenly on the cards. For more see [[OSCam/en/Loadbalancing|Loadbalancing]]<br />
<br />
Example:<br />
lb_mode = 0 loadbalance disabled, ECMs go to all readers<br />
lb_mode = 1 fastest reader first, after 5 ECMs the reader with the fastest response time will be selected<br />
lb_mode = 2 oldest reader first, reader with the longest no answer<br />
lb_mode = 3 lowest usage level, the usage level will be calculated by the sum of 5 ECMS response times, the higher a reader is busy, the higher is usage level<br />
lb_mode = 10 LB is switched off, but statistics are build<br />
<br />
<br />
Default:<br />
lb_mode = 0 # disabled<br />
<br />
===== lb_save =====<br />
{{Optional/en}}<br />
<br />
Save autoloadbalance statistics (counts). To save CPU power a minimum counts of 100 is recommended.<br />
<br />
Example:<br />
lb_save = 100 # counts of ECM's after statistics are saved<br />
<br />
Default:<br />
lb_save = 0 # no svae<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional/en}}<br />
<br />
set count of best readers for loadbalancing.<br />
<br />
Example:<br />
lb_nbest_readers = 2 # requests always go to two reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # requests go to one reader<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional/en}}<br />
<br />
set count of fallback readers for loadbalancing<br />
<br />
Example:<br />
lb_nfb_readers = 2 # two fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1 # one fallbackreader<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mode:<br />
= 0 # standard late reopening of blocker readers (default)<br />
= 1 # fast reopening of blocker readers<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5893:08/19/2011</span><br />
<br />
Set count of best readers per CAIDs for loadbalancing, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
<br />
lb_nbest_percaid = # number<br />
= [blank] # none (default)<br />
<br />
example: <br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wiil be blocked until statistics has been cleaned<br />
1 = default<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = force reopening immidiatly all failing readers if no matching was found<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional/en}}<br />
<br />
minimal ECM count to evaluate loadbalancing values<br />
<br />
Example:<br />
lb_min_ecmcount = 2 # 2 counts<br />
<br />
Default:<br />
lb_min_ecmcount = 5 # 5 counts<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional/en}}<br />
<br />
Maximum ECM count before resetting loadbalancing values.<br />
<br />
Example:<br />
lb_max_ecmcount = 200 # 200 counts<br />
<br />
Default:<br />
lb_max_ecmcount = 500 # 500 counts<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional/en}}<br />
<br />
time in seconds between retrying failed readers/CAIDs/providers/services<br />
<br />
Example:<br />
lb_reopen_seconds = 500 # retry after 500 seconds<br />
<br />
Default:<br />
lb_reopen_seconds = 900 # retry after 900 seconds<br />
<br />
===== lb_retrylimit =====<br />
{{Optional/en}}<br />
<br />
Retry next readers '''only''' if response time is higher then lb_retrylimit in '''milli seconds'''.<br />
<br />
Example:<br />
lb_retrylimit = 500 # retry next reader only, if response time is higher than 500 ms<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
===== lb_savepath ===== <br />
{{Optional/en}}<br />
<br />
Filenanme for saving loadbalancing statistics<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional/en}}<br />
<br />
hours after the loadbalancing statistics will be deleted<br />
<br />
default = 336<br />
<br />
===== lb_use_locking =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6166:12/28/2011</span><br />
<br />
disable parallel and identical ECM requests<br />
<br />
<br />
1 = on<br />
0 = off # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* You should choose this option only if:<br />
** slow system<br />
** high load<br />
** the same ECM requests come not from the cache, but will continue to the confirmed reader.<br />
<br />
* Adventages, if activated:<br />
** By synchronizing, an ECM request made by one. The identification of cache or request and assignment of the reader by loadbalancer is always successful.<br />
<br />
* Disadventages, if activated:<br />
** The synchronisation prevents multithreading and the probability of higher response times.<br />
<br />
* Adventages, if NOT activated:<br />
** Faster transit times for ECM requests<br />
<br />
* Disadventages, if NOT activated:<br />
** May have dual (n-fold) possible requests to the readers.<br />
<br/><br />
<br />
===== lb_retrylimits =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn:5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,Caid2:time2]...<br />
<br />
loadbalancing retry limit time per CAID in milliseconds, wilcard CAIDs with 2-digit Caids possible<br />
<br />
default = none<br />
<br />
example: <br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
ignore provider information CAIDs to reduce statistic date, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
example: <br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
default = none<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # enable automatic timeout based on load balancing statistics<br />
= 0 # default<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = percent<br />
<br />
percent added to average time as timeout time<br />
default = 30<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = milli seconds<br />
<br />
minimal time added to average time as timeout time<br />
default = 300<br />
<br />
===== lb_max_readers =====<br />
{{Optional/en}}<br />
<br />
lb_max_readers = limit (number)<br />
<br />
restrict the reader count to limit during learning<br />
<br />
0 = unlimited (default)<br />
x = restrict loadbalancer readers to limit x (number)<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional/en}}<br />
<br />
lb_auto_betatunnel = 0|1<br />
<br />
enable automatic Betacrypt tunneling for CAIDs 1801, 1833, 1834 and 1835 in loadbalancing mode<br />
lb_auto_betatunnel = 0 # disabled<br />
= 1 # enabled (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Betacrypt definition in oscam.user with betatunnel will be prefered [[streamboard:wiki/OSCam/en/Config/oscam.user#betatunnel|User-Betatunnel]]!<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
set mode for automatic Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only) <br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = number<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = always Betacrypt<br />
105 = represents the middle<br />
200 = always Nagravision<br />
<br />
=== Monitor ===<br />
'''Only if monitor is used!'''<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
==== port ====<br />
{{Optional/en}}<br />
UDP port for monitor<br />
port = 0 # monitor disabled<br />
= # port number<br />
<br />
Beispiel:<br />
port = 24480 # monitor on, port = 24480<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
serverip = # IP adress<br />
= # [blank] all IP's (default)<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured monitor connection<br />
[,IP address|IP address range]...<br />
<br />
Possible<br />
* one or more IP adresses<br />
* one or more IP adress ranges<br />
* mixture of IP adresses and IP adress ranges<br />
<br />
Example<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 and IP range 192.168.0.0 to 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] no secured monitor connection<br />
<br />
==== aulow ====<br />
{{Optional/en}}<br />
<br />
time no EMM occurs so that client is set to low in minutes<br />
<br />
Example<br />
aulow = 30 # After 30 minutes whithout EMM client will be switched from "active" to "on" (default).<br />
<br />
==== monlevel ====<br />
{{Optional/en}}<br />
<br />
monitor-level<br />
0 = no access to monitor (default)<br />
1 = only server and own procs<br />
2 = all procs, but viewing only<br />
3 = all procs, reload of oscam.user possible<br />
4 = complete access<br />
<br />
Example<br />
monlevel = 4 # complete access<br />
<br />
monlevel can be overwritten per user in oscam.user!<br />
<br />
==== appendchaninfo ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8546:03/13/2013<br />
</span><br />
<br />
Append channel name on log messages. Very useful when using [webif]!<br />
appendchaninfo = 1 # append chanel name<br />
= 0 # no append chanel name (default)<br />
<br />
=== lcd ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
==== lcd_outputpath ====<br />
{{Optional/en}}<br />
<br />
Path for LCD output<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
==== lcd_hideidle ====<br />
{{Optional/en}}<br />
<br />
hide reader in LCD output if reader idle > 20 seconds, default:0 <br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional/en}}<br />
<br />
LCD refresh interval (minimum 5), default:10<br />
<br />
=== WebIf ===<br />
'''Only if WebIf is used!'''<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
==== File format to send EMMs via the webinterface ====<br />
(by Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention'''<br />
<br />
* File has to be in TXT format.<br />
* The EMM-file should contain each PRE-CAM EMM in a new line.<br />
* EMMs should be in HEX representation.<br />
** Example: AABBCCDD...<br />
*Spaces and tabs between the bytes are allowed:<br />
**AA BB CC DD...<br />
*The HEX representation of each EMM's byte can be represented by upper or lower case - even mixed is allowed:<br />
**AA aa Aa aA...<br />
*Other chars and comments are not allowed.<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
<br />
default is 8888 if no httpport is set<br />
port for web interface,<br />
0 = disabled, praefix + = enable SSL<br />
<br />
Example<br />
httpport = 83 # Webinterface listening on '''http-port 83'''<br />
= +83 # Webinterface listening on '''https-port 83''' (SSL)<br />
0 # Webinterface disabled<br />
<br />
==== httpcert ====<br />
{{Optional/en}}<br />
<br />
file for http SSL certificate<br />
httpcert = oscam.cert # (look there)<br />
= # [blank] file oscam.pem (embedded) is used<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
example<br />
httpforcesslv3 = 0 none (default)<br />
= 1 force using SSLV3<br />
<br />
==== httpuser ====<br />
{{Optional/en}}<br />
<br />
Username for password protection. [blank] is default, of which is strongly discouraged! <br />
httpuser = # xyxyxy (all characters and figures are allowed)<br />
<br />
==== httppwd ====<br />
{{Optional/en}}<br />
<br />
Password for password protection. It is the same as for httpuser.<br />
httppwd = # 123456<br />
<br />
'''The ''user'' and ''pwd'' parameters are queried when connecting to the webinterface in a messagebox. If they are missing ore corrupted a message ''Forbidden'' appears and the connection is aborted!'''<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6625:05/15/2012</span><br />
<br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Do not add the content of the embedded CSS before the content of the custom CSS (default)<br />
1 # embedded CSS will be added before external custom CSS (specified by the [[#httpcss|httpcss]] parameter)<br />
<br />
This parameter can be used to override the embedded CSS with custom styles. To see the current CSS styles use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
==== httpcss ====<br />
{{Optional/en}}<br />
<br />
path for external CSS file<br />
<br />
For webinterface different styles are available. Put custom CSS files (ending with .css extension) in the oscam config directory to managed your custom styles with WebIf.<br />
<br />
Example<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] embedded style is used (default)<br />
<br />
To see the current CSS style, use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
Styles you find here: [[Streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
==== httptpl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7083:06/25/2012</span><br />
<br />
path for external templates and picons<br />
httptpl =<br />
= # [blank] No external templates<br />
<br />
path for external templates and picons, multiple simultaneously templates and picons are possible by creat‐ <br />
ing sub folders (maximum length of 32 alphanumeric characters), sub folders naming is corresponding to sub <br />
folder in URL, default:none <br />
<br />
example <br />
httptpl = /this/is/my/path <br />
<br />
folder with multiple templates: <br />
/this/is/my/path/template<br />
/this/is/my/path/template2 <br />
<br />
valid URLs: <br />
http://host:port/template1 <br />
http://host:port/template2<br />
<br/><br />
<br/><br />
==== httpoverwritebakfile ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = overwrite backup configurations files (*.bak)<br />
0 = default<br />
<br/><br />
<br/><br />
<br />
<br />
<br />
==== httplocale ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
set the "locale environment"<br />
<br />
default = blank [none]<br />
<br />
look here::<br />
<br />
http://en.wikipedia.org/wiki/locale<br />
<br />
==== httpjscript ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
path for oscam.js javascript, def: none<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional/en}}<br />
<br />
status refresh in seconds<br />
<br />
httprefresh = 7 # status will be refreshed after 7 seconds<br />
= # [blank] no refreshing<br />
<br />
==== httppollrefresh ====<br />
{{Optional/en}}<br />
<br />
refreshtime for polling in seconds<br />
<br />
httppollrefresh = 60 # polling will be refreshed after 60 seconds<br />
= # [blank|0] no refreshing poll<br />
<br />
==== httpshowpicons ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # show picons in userlist<br />
0 # default<br />
<br />
If this parameter is enables, then a new column is added to the USERS tab which display the picons of the last watched channels by active users. The folder where the picons must be configured in the httppiconpath.<br />
<br />
Possible format are:<br />
IC_caid_srvid.tpl<br />
IC_caid_provid_srvid.tpl<br />
IC_servicename.tpl<br />
<br />
added support for picons by channel name<br /><br />
syntax is:<br /><br />
take service-name from oscam.srvid,<br /><br />
replace all upper-case letters with lower case,<br /><br />
replace * with star,<br /><br />
replace & with and,<br /><br />
replace + with plus,<br /><br />
remove everything but a-z and 0-9,<br /><br />
if the result is name, the picon file will be IC_name.tpl<br /><br />
for example:<br /><br />
service-name "BBC-ONE +HD"<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
if service-name ends with hd, and picon is not found, fallback to name without hd, example:<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
-> not found, search for:<br /><br />
picon file: "IC_bbconeplus.tpl"<br /><br />
<br />
==== httphideidleclients ====<br />
{{Optional/en}}<br />
<br />
Enables hiding clients after idle time set with parameter ''' hideclient_to''' in section [monitor].<br />
httphideidleclients = 1 # hide<br />
= 0 # hide not (default)<br />
<br />
==== hideclient_to ====<br />
{{Optional/en}}<br />
<br />
Time to hide clients in the monitor if not sending requests. See also parameter '''httphideidleclienst''' in section [webif].<br />
hideclient_to = 1 # hide clients<br />
= 0 # no hide<br />
<br />
==== httphidetype ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
type = letter which defines types to hide in web interface status page (see Typ column), <br />
default: none. s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
==== httpscript ====<br />
{{Optional/en}}<br />
<br />
Path to an executable script which you wish to start from web interface<br />
httpscript = # path<br />
= # [blank] no path<br />
<br />
You can run script file from script.html (SCRIPTS item in main menu)<br /><br />
If the script file contains the "echo" will be it displayed in a Web interface.<br />
<br />
If the file can not run displays<br />
[Error]: Script "name_of_script.sh" not executable!<br />
<br />
If does not exist script displays<br />
[Error]: Script "name_of_script.sh" not found!<br />
(Works If you delete the script and refresh page)<br />
<br />
==== httpallowed ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8842:08/17/2013</span><br />
<br />
http web interface connections allowed. [blank] is allowed (default), but that makes no sense! If the webinterface to be used, then there must be a way to connect with him. Therefore we declare this parameter as '''mandatory'''!<br />
<br />
With '''::1''' OSCam decides to resolve 'localhost' to '''IPv6'''!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
<br />
<br />
Example<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host and range 192.168.0 are allowed<br />
resolving to IPv6<br />
<br />
'''default values'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1<br />
<br />
==== httpdyndns ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6558:03/21/12</span><br />
<br />
http web interface connections allowed<br />
<br />
httpdyndns = hostname [,hostnahme][,hostname]<br />
<br />
Example<br />
httpdyndns = host1.example.com,host2.example.com<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional/en}}<br />
<br />
write config:<br />
0 = all not empty parameters, all not default parameters, all parameters not containing the same value as the same parameter in global configuration (default)<br />
1 = all parameters<br />
<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional/en}}<br />
<br />
read only modus for web interface<br />
<br />
httpreadonly = 1 # only read<br />
= 0 # all is possible (default)<br />
<br />
<br />
==== httppiconpath ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9463/01/28/2014</span><br />
<br />
httppiconpath = path<br />
<br />
path to picons, default [blank] none<br />
<br />
====httphelplang====<br />
{{required}}<br />
<br />
set right language for wiki entry point<br />
de|en|fr <available wiki languages><br />
<br />
==== httposcamlabel ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
set individual label in web interface header, default: OSCam<br />
<br />
==== http_status_log ====<br />
{{Optional/en}}<br />
<br />
http_status_log = 0|1<br />
1 = display log in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowreaderinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowreaderinfo = 0|1<br />
1 = display readers informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowecminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowecminfo = 0|1<br />
1 = display readers and users ECM informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowuserinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowuserinfo = 0|1<br />
1 = display users informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowcacheexinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowcacheexinfo = 0|1<br />
1 = display CacheEX informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowmeminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowmeminfo = 0|1<br />
1 = display memory usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowloadinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowloadinfo = 0|1<br />
1 = display load average and CPU usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
<br/><br />
<br/><br />
<br />
=== [cache] ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW since svn 8358:02/16/2013</span><br />
<br />
{{OSCamConfCacheParameter}}<br />
<br />
<br />
==== delay ====<br />
{{optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
==== max_time ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
==== max_hit_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8910:09/10/2013</span><br />
<br />
max_hit_time = in seconds<br />
<br />
maximum time for cache exchange hits resists in cach for evaluating wait_time, default: 15<br />
<br />
<br />
<br />
==== wait_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 8077:01/06/2013</span><br />
<br />
wait_time = milli-seconds<br />
= [blank] none (default)<br />
<br />
wait time for cache exchange (mode 2 & 3 only!)and Cardserverproxy before sending ECM to reader or proxy<br />
<br />
Example:<br />
0:50:250,0200@00009X:50:150:950,0500@000001:150:1602&ffdf:1200<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional/en}}<br />
<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode:<br />
specify behaviour for counter parameter<br />
<br />
0 = when wait_time expires, serve highest counter's cw got anyway, even if no counter reached.<br />
1 = never serve cw (coming from cacheex) stored in cache if its counter not reaches counter. When wait_time expires, requests<br />
will go to normal readers! Only when a cw reaches counter, it can be served to clients.<br />
<br />
Default = 0<br />
<br />
<br />
* counter:<br />
set minimum cw counter to allow cw is used.<br />
<br />
Default = 1 (use default behaviour: use cw with highest counter when cache is checked)<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = allow bad cycles from a fixed fallback reader. Default = 0<br />
<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== csp_port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
This is a UDP ('''not TCP''') listen port for incoming traffic from csp nodes<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
==== csp_serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
This is the local bind IP of csp_port (see above!)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 disable (default)<br />
= 1 enable<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: not for all NDS SC's!'''<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID enabled for CW cycle check, default: none<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = count<br />
<br />
maximum CW cycle list entries, default = 500, maximum = 4000<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = minutes<br />
<br />
minimum time a learned cycletime resists in memory, default = 0, maximum = 15<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = log bad CW cycle only <br />
1 = drop bad CW cycle (default)<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, <br />
1 = drop old CW cycle, <br />
0 = no drop(default)<br />
<br/><br />
==== cwcycle_sensitive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (or more) same bytes and drop new CW<br />
3 = 3 (or more) same bytes and drop new CW<br />
4 = 4 (or more) same bytes and drop new CW<br />
<br />
<br/><br />
==== cwcycle_usecwcfromce ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = use CW Info from cache exchange<br />
0 = default<br />
<br/><br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
answer when cache exchange timeount expires, if no normal readers are vavailable for sending ECM's::<br />
<br />
0 = immediatly send '''not found''' to client (default)<br />
1 = wait for cache exchange answer until client timeout expires<br />
<br />
<br/><br />
<br/><br />
<br />
<br/><br />
<br />
=== csp (UDP) ===<br />
Section only needed if using cache exchange<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:02/16/2013 look at '''[cache]'''!</span><br />
<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6124:12/23/2011</span><br />
<br />
UDP listen port for incoming traffic from csp nodes<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
==== serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6124:12/23/2011</span><br />
<br />
Local bind IP of the above udp port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
=== Camd 33 (TCP) ===<br />
Section required only if camd33 will be used as client protocol!<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for camd 3.3x clients, 0 = disabled, default:0<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # listenig to all<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured camd 3.3x client connection<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
Example:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt = [none]<br />
<br />
==== passive ====<br />
{{Optional/en}}<br />
<br />
force passive camd 3.3x client<br />
<br />
Camd3.3x protocol generally has aktive clients. In certain circumstances the client must switched on only "passive" mode.<br />
<br />
Example:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
==== key ====<br />
{{Optional/en}}<br />
128 bit key<br />
<br />
key for camd 3.3x client encryption<br />
<br />
<br />
Example:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key = # (blank] none (default)<br />
<br />
=== cs357x (UDP) ===<br />
Section required only if cs357x will be used as client protocol! These protocols principle encrypt and build the key from user name.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''cs357x''' was also known as '''camd35''' designated. Both terms mean the same protocol with the same functions and parameters. In the future, to avoid confusion '''only cs357x''' is used.<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
UDP port for camd 3.5x|cs357x clients. Port must be opened at router!<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35|cs3.57x-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== cs378x (TCP) ===<br />
Section required only if cs378x (camd 3.5x in TCP) will be used as client protocol!<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
Port(s) TCP for Cs378x clients (camd 3.5x in TCP mode). Port(s) must be opened at router!<br />
<br />
port@CAID[:ident][,ident]...[;port@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@0500:030B00;22764@0648<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell cs3.78x clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disable<br />
<br />
<br />
Mor here: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== Newcamd (TCP) ===<br />
Section required only if newcamd will be used as client protocol!<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
==== key ====<br />
{{required}}<br />
DES key<br />
Default key for newcamd client encryption.<br />
<br />
Example:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
==== port ====<br />
{{required}}<br />
TCP port/DES key/CAID/ident definitions. Each CAID requires a separate port. If you don't specify a DES key for a port, the default DES Key will be used!<br />
<br />
port[{DES key}]@CAID[:ident][,ident]...[;port[{DES key}]@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@1234:000000 # (CAID 1234 connected with port 15000)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 connected with port 15000. CAID 5678 with port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = [blank]<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
!! Dyn DNS Addresses are not forseen here and won't work !!<br />
<br />
Example:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed = [blank]<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<br />
Example:<br />
keepalive = 1 # (enabled)<br />
keepalive = 0 # (disabled)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
==== mgclient ====<br />
{{Optional/en}}<br />
<br />
Enable mgcamd extended newcamd protocol, allowing for a single connection to work with mutliple providers, default:0<br />
<br />
Example:<br />
mgclient = 1 # (enabled)<br />
mgclient = 0 # (disabled)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br/><br />
<br/><br />
=== '''scam''' ===<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9878:09/29/2014</span><br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port = port<br />
<br />
UDP port for scam server, default = 0<br />
<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br/><br />
<br/><br />
<br />
=== Radegast ===<br />
Section required only if radegast will be used as client protocol!<br />
<br />
{{OSCamConfRadegastParameter}}<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for radegast clients (enables radegast)<br />
port =<br />
= 0 (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br />
==== user ====<br />
{{required}}<br />
<br />
user name for radegast client<br />
user = username<br />
<br />
=== Serial ===<br />
Section required only if seral interface will be used!<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
==== device ====<br />
{{Optional/en}}<br />
<br />
Parameter of device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = name of Serial Device<br />
option = timeout = milli seconds timeout for connection default: 50<br />
= delay milli seconds additive between 2 characters<br />
<br />
supported serial devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
=== Cccam (TCP) ===<br />
Section required only if Cccam will be used as client protocol!<br />
{{OSCamConfCccamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6206:01/07/2012</span><br />
<br />
Port = 0|port[,port...]<br />
<br />
TCP/IP-Ports for CCcam clients, enables Cccam protocol!<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled (default)<br />
<br />
==== version ====<br />
{{Optional/en}}<br />
<br />
<br />
define CCcam version, minimum CCcam version 2.0.11, used with original CCcam only, default:none<br />
<br />
<nowiki><main version>,<version>,<sub version></nowiki><br />
<br />
Example:<br />
version = 2.0.11<br />
<br />
==== reshare ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
reshare level for CCcam clients:<br />
-1 = no resharing<br />
0 = resharing for direct peer only<br />
1 = resharing for direct peer and next level<br />
x = resharing for direct peer and next x level (x for number of level)<br />
10 = (default)<br />
<br />
Example:<br />
reshare = 1 resharing only for direct peer and next level<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
==== reshare_mode ====<br />
{{Optional/en}}<br />
<br />
CCcam reshare mode<br />
0 = reader reshares only received SCs for CCcam readers,<br />
defined filters/CAIDs/idents on other readers (default)<br />
1 = reader reshares received SCs (like=0) and defined services<br />
2 = reader reshares only defined reader services as virtual SCs<br />
3 = reader reshares only defined user services as virtual SCs<br />
4 = reader reshares only received cards<br />
<br />
Every server is shared as hop=0 and with defined reshare values.<br />
<br />
Service reshare only works if positive services defined: no service - no reshare!<br />
<br />
==== ignorereshare ====<br />
{{Optional/en}}<br />
<br />
<br />
CCcam reshare setting:<br />
0 = use reshare setting of server (default)<br />
1 = use reshare setting of reader or user<br />
<br />
Example:<br />
ignorereshare = 1 reshare settings of reader or user are used<br />
<br />
==== stealth ====<br />
{{Optional/en}}<br />
<br />
Behaviour like the original CCcam: no activate partner detection and extended OSCam-CCcam protocol, prevent other OSCam to detect the server as OSCam server.<br />
<br />
stealth = 1 # stealth enabled<br />
= 0 # stealth disabled (default)<br />
<br />
==== minimizecards ====<br />
{{Optional/en}}<br />
<br />
mode how to provide CCcam servers to CCcam clients:<br />
0 = no aggregation, remove duplicates only (default)<br />
1 = based on minimum hop: two SCs with different hops are summarized, new SCs get a smaller hop<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional/en}}<br />
<br />
<br />
interval to provide share list update to CCcam clients in seconds<br />
0 = update based on server updates, values <= 10 are invalid and will be set to 30 <br />
= [blank] 240 (default)<br />
<br />
==== keepconnected ====<br />
{{Optional/en}}<br />
<br />
set CCcam keepalive modus:<br />
0 = disconnect client when max idle time is reached<br />
1 = keep client connected (default)<br />
<br />
==== recv_timeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7672:10/09/2012</span><br />
<br />
recv_timeout = milli-seconds<br />
<br />
set network timeout for receiving data<br />
default = 2000<br />
<br />
==== forward_origin_card ====<br />
{{Optional/en}}<br />
<br />
forward_origin_card = 0|1<br />
<br />
1 = forward ECM request to reader holding this card, loadbalancer, fallback and caching will be disabled <br />
0 = default<br />
<br />
==== nodeid ====<br />
{{Optional/en}}<br />
<br />
nodeid = ID<br />
<br />
set CCcam node ID in hex, default:none<br />
<br />
example<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br/><br />
=== Pandora ===<br />
{{OSCamConfPandoraParameter}}<br />
<br />
==== pand_skip_send_dw ====<br />
<br />
<br />
pand_skip_send_dw = dummy<br />
<br />
<br />
==== pand_allowed ====<br />
<br />
<br />
pand_aloowed = dummy<br />
<br />
<br />
==== pand_usr ====<br />
<br />
<br />
pand_user = dummy<br />
<br />
<br />
==== pand_pass ====<br />
<br />
<br />
pand_pass = dummy<br />
<br />
<br />
==== pand_ecm ====<br />
<br />
<br />
pand_ecm = dummy<br />
<br />
<br />
==== pand_port ====<br />
<br />
<br />
pand_port = dummy<br />
<br />
<br />
==== pand_srvid ====<br />
<br />
pand_srvid = dummy<br />
<br />
<br/><br />
<br/><br />
<br />
=== GBox ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
{{OScamConfGboxParameter}}<br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 {3 3}}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== hostname ====<br />
{{required}}<br />
<br />
hostname = my IP or ddns<br />
<br />
examples:<br />
hostname = 192.168.1.120<br />
hostname = willy.noip.org<br />
<br />
<br/><br />
<br />
==== my_password ====<br />
{{required}}<br />
<br />
my_password = 4 hex bytes, 8 chara<br />
<br />
example:<br />
my_password = 98AF3E25<br />
<br />
<br/><br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port= define incoming UDP port(s) used by Gbox protocol<br />
<br />
port= port#1[[,port#2]...[,port#32]]<br />
<br />
Maximum 32 ports.<br />
<br />
<br/><br />
<br />
==== proxy_card ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy reader card(s) to be reshared into gbox network, default = none<br />
<br />
proxy_card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
example:<br />
<br />
proxy_card = 18300000,0D950400,05050F00 <br />
<br />
<br/><br />
<br />
==== ccc_reshare ====<br />
{{Optional/en}}<br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = global enable cccam-cards to be reshared into gbox network, default = 0<br />
<br />
- note: set up caids to be reshared in 'ccc_gbx_caid ='<br />
<br />
- unique peer reshare level to be set in oscam.server [reader]-> cccam_reshare<br />
<br />
<br/><br />
<br />
==== ccc_gbx_caid ====<br />
{{Optional/en}}<br />
<br />
ccc_gbx_caid = caid_1,caid_2,...<br />
<br />
- note: ccc_reshare must be set as well<br />
<br />
<br/><br />
<br />
==== my_vers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9645:04/09/2014</span><br />
<br />
<br />
my_vers = version<br />
<br />
set gbox version hexadecimal low byte<br />
<br />
default = 2A<br />
<br />
<br/><br />
<br />
==== my_cpu_api ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9712:05/11/2014</span><br />
<br />
<br />
my-cpu_api = byte<br />
<br />
set gbox CPU and API byte in hexadecimal, default = 40<br />
default = 40<br />
<br />
<br/><br />
<br />
==== gbox_reconnect ====<br />
{{Optional/en}}<br />
<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min:60, max:300<br />
<br />
<br/><br />
<br />
==== accept_remm_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11399:29/01/2018</span><br />
<br />
Accept to send Remote EMMs to specified Server Peer-IDs<br />
<br />
accept_remm_peer = peer#1[[,peer#2]...[,peer#8]]<br />
<br />
<br/><br />
<br />
==== dis_attack_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11360:16/02/2017</span><br />
<br />
Disable creation of attack.txt<br />
<br />
dis_attack_txt = 0|1 - default: 0 <br />
<br />
<br/><br />
<br />
==== log_hello ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11231:20/04/2016</span><br />
<br />
Display hello messages in debug log<br />
<br />
log_hello = 0|1 - default: 1 <br />
<br />
<br/><br />
<br />
==== ignore_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Ignore specific peer ID(s) totally. Login rejected.<br />
<br />
ignore_peer = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== block_ecm ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Block ECM for specific peer ID(s).<br />
<br />
block_ecm = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== tmp_dir ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/2014</span><br />
<br />
gbox tempory directory<br />
<br />
tmp_dir = /path/to/dir <br />
<br />
default: /tmp/.oscam<br />
<br />
<br/><br />
<br />
==== gsms_disable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9714:05/11/2014</span><br />
<br />
<br />
gsms_disable = 0|1<br />
<br />
0 - Gbox Short Message Service (GSMS) is enabled<br/><br />
1 - disable gbox short message service (GSMS)<br/><br />
<br />
default = 1<br />
<br />
<br/><br />
<br/><br />
<br />
==== gbox_save_gsms ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_save_gsms=0|1<br />
<br />
0 = don't save GSMS in configuration<br/><br />
1 = save all GSMS field in configuration<br />
<br />
You need to press save button to really save it!<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_type=0|1<br />
<br />
0 = normal text message<br/><br />
1 = normal text message + OSD (On Screen Display)<br />
<br/><br />
<br/><br />
<br />
==== gbox_dest_peers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_dest_peers = [BOXID[,BOXID]...[,BOXID]]<br />
<br />
Maximum 16 * 2 bytes (4 hexa digits), comma-separated. For broadcast to all use FFFF.<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_txt=Your text to send to peers.<br />
<br />
From 6 to 127 alphanumerical characters.<br />
<br/><br />
<br/><br />
<br />
=== DVBapi ===<br />
{{Optional/en}}<br />
<br />
Section required only if OSCam will also be used as client!<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional/en}}<br />
<br />
DVB API enabled<br />
<br />
Example:<br />
enabled = 0 # disabled (default)<br />
enabled = 1 # enabled<br />
<br />
==== user ====<br />
{{required}}<br />
user name for DVB API client<br />
Example:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
==== au ====<br />
{{Optional/en}}<br />
<br />
AU mode for dvbapi:<br />
au = 0 # disable AU (default)<br />
au = 1 # enable AU<br />
<br />
==== pmt_mode ====<br />
{{Optional/en}}<br />
PMT mode:<br />
pmt_mode = 0 # use camd.socket and PMT file (default)<br />
pmt_mode = 1 # disable reading PMT file<br />
pmt_mode = 2 # disable camd.socket<br />
pmt_mode = 3 # read PMT file on startup only<br />
pmt_mode = 4 # do not use signal handler for monitoring /tmp<br />
pmt_mode = 5 # do not use signal handler to monitor /tmp & disable camd.socket<br />
pmt_mode = 6 # use PMT server mode <span style="background-color:Green;color:White;padding:0 5px;">NEU - NEW - NOUVEAU - NUOVO svn8680:05/06/2013</span><br />
<br />
==== request_mode ====<br />
{{Optional/en}}<br />
CAID request mode:<br />
0 = try all possible CAIDs one by one (default)<br />
1 = try all CAIDs simultaneously<br />
<br />
==== listen_port ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP/IP port for SAT IP clients, filtering has to be done on client site<br />
<br />
0 = disabled (default)<br />
<br />
==== boxtype ====<br />
{{required}}<br />
set boxtype, auto detection of DVB API will be aspired:<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt|qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
ipbox with camd.socket support, currently only with PGI image version 0.6 or above, verified on HD models only<br />
<br />
ipbox-pmt can be used on any DGS based images (with or without camd.socket support), verified on HD models only<br />
<br />
pc is for generic pc support (currently supported on VDR with vdr-plugin-dvbapi)<br />
<br />
==== cw_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
cw_delay = milli-seconds<br />
<br />
delay of CW writing, default = none<br />
<br />
==== delayer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6808:05/14/2012</span><br />
<br />
delayer = milli-seconds<br />
<br />
minimum time to write CW<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
= 1 reopen demux devices in each channel switching,<br />
= 0 default<br />
<br />
==== decodeforever ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = trying to decode on all CAIDs<br />
0 = default<br />
<br />
==== ecminfo_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10722:06/13/15</span><br />
<br />
Define the type of ecm.info file to create, ecminfo_type = 0|1|2|3|4|5<br />
<br />
0 = default oscam syntax<br />
1 = default oscam syntax with ecmtime in ms instead of s<br />
2 = wicardd<br />
3 = mgcamd<br />
4 = cccam<br />
5 = camd3<br />
<br />
==== read_sdt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10766:06/15/15</span><br />
<br />
If it is not yet available, this option automatically add entries in your oscam.srvid2 (or oscam.srvid) and in your oscam.provid files. You need to stay '''more than 30 seconds''' on a channel for the auto-detect to start. So both channel name and provider name are retrieved. If entries already exist they are not changed nor updated, so you keep full control on the content of both files, only missing entries are added.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = disabled (default)<br />
1 = on, do not save FTA channels<br />
2 = on, save FTA channels<br />
<br />
==== write_sdt_prov ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10841:06/27/15</span><br />
<br />
First enable the read_sdt parameter then you can specify if the provider name is saved or not into the oscam.srvid2 or oscam.srvid file. This is not mandatory since the provider name is now retrieved automatically from the oscam.provid file.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = off, do not write provider name into oscam.srvid/2 (default)<br />
1 = on, write provider name into oscam.srvid/2<br />
<br />
=== Anticasc ===<br />
Section is needed if anticascading will be used to protect against unauthorized forwarding CardSharing. <br />
{{OSCamConfAnticascParameter}}<br />
<br />
==== enabled ====<br />
{{required}}<br />
<br />
enabled anti-cascading:<br />
enabled = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== numusers ====<br />
{{Optional/en}}<br />
anti-cascading: user per account (number)<br />
numusers = 0 # anticascading disabled (default)<br />
= 1 # cascading for 1 user allowed ==> (1*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 11 ecms allowed per minute<br />
= 2 # cascading for 2 users allowed ==> (2*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 17 ecms allowed per minute <br><br />
<span style="color:Blue;padding:0;5px"><B>10</B></span> = number you have put in oscam.ac. Default value is 10<br />
<br />
==== sampletime ====<br />
{{Optional/en}}<br />
duration of sample in minutes:<br />
sampletime = 5 # duration 5 minutes<br />
= # [blank] duration 2 minutes (default)<br />
<br />
Ex: numusers = 1 ==> 11 ecms * 5 minutes ==> 55 ecms allowed in 5 minutes <br />
numusers = 2 ==> 17 ecms * 5 minutes ==> 85 ecms allowed in 5 minutes<br />
<br />
==== samples ====<br />
{{Optional/en}}<br />
<br />
number of additionnal ecms allowed (possible values between 2 and 10)<br />
samples = 7 # 7 additional ecms allowed<br />
= # [blank] 10 additional ecms allowed (default)<br />
<br />
==== penalty ====<br />
{{Optional/en}}<br />
Level of the penalty if the user exceeds the result shown in Ex on Sampletime<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay ([[OSCam/en/Config/oscam.conf#fakedelay|fakedelay]])<br />
<br />
penalty can be overwritten per user in oscam.user<br />
<br />
==== aclogfile ====<br />
{{Optional/en}}<br />
file for anti-cascading logging<br />
aclogfile =<br />
= # [blank] no logfile (default)<br />
<br />
==== fakedelay ====<br />
{{Optional/en}}<br />
<br />
fake delay time in milli seconds (possible values between 100 and 3000)<br />
fakedelay = 500 # delay 500 milli seconds<br />
= # [blank] 1000 milli seconds (default)<br />
<br />
==== denysamples ====<br />
{{Optional/en}}<br />
<br />
How many samples should be penalized?<br />
denysamples = 10 # 10 samples will be penalized<br />
= # [blank] 8 Samples will penalized (default)<br />
<br/><br />
<br />
==== acosc_enabled ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br/><br />
acosc_enabled = 0|1<br />
1 = enable anticascading oder SIDs count<br />
0 = default<br />
<br/><br />
==== acosc_max_active_sids ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = count<br />
<br />
maximum activ SIDs with anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br />
<br/><br />
<br />
==== acosc_zap_limit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = count<br />
<br />
zap limit for anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
level of penalty with anticascading over SIDs count:<br />
<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = seconds<br />
<br />
penalty duration for anticascading over SIDs count:<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
==== acosc_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_delay = milliseconds<br />
<br />
delay for anticascading over SIDs count<br />
<br />
0 = unlimites (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
<br />
<br />
<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13519
OSCam/en/Config/oscam.server
2020-02-24T14:35:38Z
<p>Felixka: /* cccam_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password provided by peer (4 bytes, 8 hex chars)<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these CAIDs.<br />
'''Attention: The CAID filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 3<br />
<br />
<br/><br />
<br />
===== force_remm =====<br />
{{Optional/en}}<br />
<br />
Force remote emm <br />
<br />
force_remm = 0|1|... , default = 0 (disabled)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''use only to activate a card or if card entitlements are expired'''<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to send into gbox network<br />
<br />
cccam_reshare = level default = -1 (disabled)<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13518
OSCam/en/Config/oscam.server
2019-10-18T12:25:38Z
<p>Felixka: /* gbox */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password provided by peer (4 bytes, 8 hex chars)<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these CAIDs.<br />
'''Attention: The CAID filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 3<br />
<br />
<br/><br />
<br />
===== force_remm =====<br />
{{Optional/en}}<br />
<br />
Force remote emm <br />
<br />
force_remm = 0|1|... , default = 0 (disabled)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''use only to activate a card or if card entitlements are expired'''<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to send into gbox network<br />
<br />
cccam_reshare = level default = 1<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.server&diff=13506
OSCam/de/Config/oscam.server
2019-04-17T19:24:59Z
<p>Felixka: /* disablecrccws */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.server''' ==<br />
Diese Konfigurationsdatei enthält Reader-Parameter für OSCam. Die Abschnitte dürfen sich wiederholen (mehr als ein Reader möglich). Es muss aber in jedem Fall mindestens ein reader konfiguriert sein!<br />
<br />
Beispiel-Konfiguration für die wichtigsten Reader sind hier zu finden [[OSCam/de/examples/Reader|Beispiel-Konfigurationen]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
<br />
=== '''Reader''' ===<br />
'''Grundsatz:''' Es können mehrere [reader]-Abschnitte erstellt werden. Jeder vollständige Abschnitt wird dann als Reader verwendet. Er '''muss''' immer mit [reader] beginnen. Im Parameter "label" kann dann die Art des Readers beschrieben werden:<br />
<br />
Beispiele: easymouse, phönix, smargo, sc8in1 usw.<br />
<br />
<br />
==== label ====<br />
{{Mandatory}}<br />
<br />
Legt den Namen für diesen Reader fest.<br />
<br />
'''Der Name des Labels darf nicht identisch zu einem Usernamen (oscam.users) sein!'''<br />
<br />
<br />
Beispiel<br />
label = easymouse2<br />
<br />
<br />
==== enable ====<br />
{{Optional}}<br />
Reader aktivieren/deaktivieren<br />
enable = 0 # Reader aus<br />
= 1 # Reader ein (default)<br />
<br />
==== description ====<br />
{{Optional}}<br />
description = Text <br />
<br />
Beliebiger Text zur Beschreibung des readers; default: [blank] keine Beschreibung<br />
<br />
'''Nicht zu verwechseln mit ''label''!''' Hier kann zusätzlich eine Information hinterlegt werden, z.B. Reader nur für CI+ usw.<br />
<br />
<br />
==== protocol ====<br />
{{Mandatory}}<br />
Kommunikationsprotokoll für den Reader.<br />
protocol = mouse # (Lokaler Cardreader)<br />
= internal # (Alle Cardreader mit einem "Device=/dev/sciX", sowie interne Coolstream-Reader)<br />
= camd35|cs357x # (Cascading - camd 3.5-kompatibler Remote-Server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x # (camd 3.5-kompatibler Remote-Server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1 # (SC8in1 und MCR 4/8 Cardreader)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''smartreader:''' Es können Probleme auftreten, wenn der Cardreader im smartreader-Modus in einem USB-Hub betrieben wird.<br />
In diesem Fall den Cardreader direkt am PC/Receiver einstecken und erneut testen.<br />
Sollte es dann funktionieren, ggf. einen anderen USB-Hub besorgen.<br />
<br />
<br />
==== device ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8911:09/10/2013</span><br />
<br />
Legt den local oder remote reader Abschnitt [reader] fest:<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw <br />
<br />
Bestimmt den reader type:<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3 <br />
bus:device: Bus- und Device-Namen von Smartreader+ oder Infinity USB (mit lsusb 'Bus' und 'Device' holen)<br />
serialnum: Serial-Nummer des Smartreader+ oder Infinity USB<br />
device: Name der Device<br />
device:slot: device name und slot-nummer '''für sc8in1''' (1-8)<br />
'''Es wird nur ein SC8in1 unterstützt!'''<br />
ip|hostname: IP-Adresse oder Hostname<br />
port: TCP/IP port <br />
lport: Remapping für den Local-Port (TCP/IP)<br />
PCSC: Nummer des PCSC-Readers (mit 0 starten!)<br />
Alternativ kann über den Namen des Readers (bzw. einen Teil davon) selektiert werden, z.B. "-1:SCR 3310" (Namen der erkannten Reader werden bei "oscam -d 32" ausgegeben)<br />
0|1: '''Nur für die Coolstream HD-1''' (Reader 0 oder 1 auswählen)<br />
constantcw: Dateiname für das Constant-CW-File<br />
<br />
Format des CW-Files: <br />
'''Standard-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
Beispiele für device--parameter:<br />
device = /dev/ttyS0 # Reader an COM1 (bei Linux i386 und Windows)<br />
device = /dev/tts/1 # Reader an COM2 (Linux dbox2 mit multicam)<br />
device = /dev/ttyUSB0 # Reader an USB (Linux i386)<br />
device = Serial:Reader 1 # z.B. Smargo im smartreader-Modus, wobei die Kennung "Reader 1" der Smargo-Konfiguration zu entnehmen ist!<br />
device = /var/keys/constant.cw # Einbindung eines constantcw<br />
device = /dev/ttyUSB0:1 # Slot 1 eines SC8in1 oder MCR 4/8 (Linux i386)<br />
<br />
'''Hinweis:''' Der Zähler für die Device liegt immer um 1 hinter der Nummer des COM-Ports! Also ttyS0 = COM1, tts/1 = COM2. Bei Benutzung neuerer PC sind kaum noch serielle Anschlüsse vorhanden, sodass in diesen Fällen USB 2.0 benutzt werden muss. Hier am besten im Gerätemanager des PC nachschauen, welcher COM-Port dem Reader zugewiesen wurde und in die Device den Port -1 eintragen!<br />
<br />
==== detect ====<br />
{{Depends}}<br />
Der Card Status (Karte im Reader eingeführt oder entfernt) wird detektiert mit Hilfe einer handshake input Leitung der seriellen Schnittstelle (UART/SCI) - cd, cts, dsr oder ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" bedeutet: Keine Leitung zum detektieren des Card Status vorhanden. Karte wird immer als im Kartenleser gesteckt erkannt.<br />
<br />
* Falls das detect signal invertiert ist: prefix "!" (eg "detect = !cts")<br />
<br />
<br />
Falls Parameter '''use_gpio = 1''' gesetzt ist:<br />
<br />
detect = gpio1...gpio7 - Card Status wird über einen gpio erfasst. GPIO means "general purpose input output". <br />
<br />
<br />
Beispiel:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
'''protocol = mouse'''<br />
'''device = /dev/ttyUSB0''' (easymouse 2)<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends}}<br />
Benutze gpio als card detect/ reset. Siehe auch '''detect ='''<br />
use_gpio = 0|1 #default = 0<br />
<br />
==== cardmhz ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
'''Standard'''-Frequenz der Karte in Schritten von 10 KHz. Für Irdeto-Karten z.B. "cardmhz = 600" (6 Mhz)<br />
<br />
Beispiel:<br />
cardmhz = 600 # Irdetokarte<br />
= # [blank] Default-Wert 357<br />
<br />
'''Interne-Dreambox-Leser'''<br />
<br />
Wenn cardmhz >2000 eingetragen wird aktiviert OScam den PLL-Clock. Interne-Dreambox-Leser (Dream Multimedia GmbH und Clones) können damit optimal getaktet werden.<br />
<br />
Der verwendete cardmhz-wert entspricht dem höchsten PLL-Takt. OSCam wird dann den optimalen PLL-Teiler berechnen damit die Frequenz möglichst nahe an den Wert kommt welcher bei "mhz" definiert wurde.<br />
<br />
Benutze die folgenden Einstellungen:<br />
<br />
Modelle mit PPC-CPU (DM500/DM600/DM7000/DM7020): "cardmhz = 3150"<br />
<br />
Modelle mit MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.): "cardmhz = 2700"<br />
<br />
Die DM7025 ist speziell: "cardmhz = 8300"<br />
<br />
'''Wird nur der Parameter cardmhz gesetzt (ohne mhz = xxx) wird die Karte automatisch anhand des ATR getaktet!'''<br />
<br />
Beispiel:<br />
Du hast eine Dream 800 HD PVR, das ist eine MIPS, daher muss du "cardmhz = 2700" setzen. Nehmen wir an du hast eine Nagra-Karte welche auf 5 MHz laufen soll.<br />
Wenn du die Karte richtig takten willst verwende "cardmhz = 2700" und "mhz = 500", Oscam taktet die Karte dann mit der nächst möglichen Frequenz (4.50 Mhz).<br />
Möchtest du sie übertakten, dann verwende "cardmhz = 2700" und z.B. "mhz = 900".<br />
Deine Karte läuft nun auf 9 Mhz. Aber vorsichtig, eine übertaktete Karte kann heiss und instabil werden! ([[OSCam/de/examples/Overclocking|Overclocking]] beachten!)<br />
<br />
Viele Interne-Leser von anderen Herstellern als Dream ignorieren die eingestellten Werte! Aber du solltest "cardmhz" und mhz" trotzdem setzen da es zum berechnen der richtigen "timings" verwendet wird. Wenn du cardmhz/mhz richtig setzt ist das "timing" besser für die aktuelle (automatisch gesetzte) Frequenz des Internen-Lesers. Als Ergebnis bekommst du bessere ECM-Zeiten oder mehr Stabilität.<br />
<br />
Erwarte keine Wunder, nur ein übertakten der Karte bringt bessere ECM-Zeiten. Schlechtes "timing" kann jedoch zu verzögerungen führen oder die Karte instabil machen.<br />
<br />
'''Nützliche Links:'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|Liste verschiedener Karten und ihren Frequenzen]]'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
==== mhz ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
mhz = Frequenz in KHz<br />
<br />
Sofern dies technisch möglich ist kann abweichend von '''cardmhz''' die Frequenz des Kartenlesers anders (in der Regel höher) als die Standard-Frequenz der Karte eingestellt werden (in 10 KHz-Schritten). Man spricht dann von [[OSCam/de/examples/Overclocking|Overclocking]]. So kann z.B. eine S02-Karte (Standard 6 MHz) mit 10 MHz übertaktet werden.<br />
<br />
Beispiel Externe-Reader:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
Beispiel DM800:<br />
cardmhz = 2700 # (27MHz PLL)<br />
mhz = 900 # (Wert wird berechnet -> 27Mhz : 3 = 9 Mhz)<br />
<br />
Hier eine ausführlichere Beschreibung von '''stefansat''' aus der Distri-Doku:<br />
<br />
Wenn die Frequenz in '''mhz''' größer ist als in '''cardmhz''', dann befindest Du dich im [[OSCam/de/examples/Overclocking|Overclocking]] Modus.<br />
<br />
Smargo-Reader und interne Reader der Dreamboxen werden durch den '''ATR''' automatisch eingestellt, wenn '''autospeed = 1''' (siehe nächsten Parameter) gesetzt ist.<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
<br />
==== autospeed ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
1 = setzt den mhz-Wert anhand des ATR (default)<br />
0 = disabled<br />
<br />
<br />
==== deprecated ====<br />
{{Optional}}<br />
Zuerst wird die Smartcard im Normal-Modus initialisiert. Schlägt dies fehl, wird die Initialisierung automatisch auf den veralteten Modus umgeschaltet, so dass die Smartcard-Geschwindigkeit nicht verändert wird und die Kommunikation auf normaler ATR Geschwindigkeit von 9600 Baud bleibt.<br />
deprecated = 1 # ausschließlich veralteter Modus<br />
= 0 # default<br />
<br />
<br />
==== mode ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Nur für AZBox'''<br />
<br />
mode = 1 # AzBox-Reader<br />
= 0 # default<br />
Setzt den Init-Mode für die Karte im internen AZBox-reader<br />
<br />
<br />
==== device_out_endpoint ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8013:12/29/2012</span><br />
<br />
Setzt die Addresse des Endpunkts für FTDI-Chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
<br />
==== smargopatch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet den workaround für smargoreader+ und reader ein, bis der native mode funktioniert<br />
smargopatch = 1<br />
= 0 (default)<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet fix für SC8in1/MCR DTR/RTS kernel bug ein<br />
sc8in1_dtrrts_patch = 1<br />
= 0 # (default)<br />
<br />
<br />
==== cool_timeout_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6286:01/23/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Setzt beim init der SC einen timeout in Millisekunden fest (im internen Reader).<br />
cool_timeout_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Hier kann ein timeout der SC für read/transmit nach dem init in Millisekunden festgelegt werden (nur für interne Reader).<br />
cool_timeout_after_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9568:03/16/2014</span><br />
<br />
Fügt einen Controll-Check für Pin Payload von NDS Videoguard Karten hinzu (4 Hex-Bytes). '''Gültig nur für physikalische Reader'''<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
<br />
==== ins7e ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5959:09/22/2011</span><br />
<br />
Füge 26 hex-bytes payload für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e = payload<br />
= # [blank] default (none)<br />
<br />
<br />
==== ins7e11 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6064:12/06/2011</span><br />
<br />
Füge TA1 für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e11 = TA1 Byte<br />
= # [blank] default (none)<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
<br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9884:09/30/2014</span><br />
{{Optional}}<br />
schaltet den 0x07-EMM-Fix für NDS Videoguard 2 Karten ein. '''Gültig nur für physikalische Reader'''<br />
fix07 = 1 # 0x07-EMM-Fix eingeschaltet (default)<br />
= 0 # ausgeschaltet <br />
<br />
<br />
==== force_irdeto ====<br />
{{Optional}}<br />
Forciert den Irdeto-Modus, auch wenn ein RSA-Key für Irdeto getunnelte Nagravisions-Karte vorliegt.<br />
force_irdeto = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
==== nagra_read ====<br />
{{Optional}}<br />
Lese Nagravision-Records. '''Nur für NCMED-Karten'''<br />
nagra_read = 0 # ausgeschaltet (default)<br />
= 1 # lese alle Records mit abgelaufenen Rechten<br />
= 2 # lese nur Records mit gültigen Rechten<br />
<br />
<br />
==== rsakey ====<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7046:06/12/12</span><br />
{{Optional}}<br />
<br />
RSA key für Nagravision/Tiger SCs / CAM key data für Irdeto SCs, Conax SCs<br />
rsakey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== fix9993 ====<br />
{{Optional}}<br />
fix9993 = 0|1<br />
<br />
Fixed den error 9993 bei CAID 0919 SC's<br />
<br />
fix9993 = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== readtiers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
Methode wie die Tiers von NDS Videoguard Smartcards ausgelesen werden.<br />
<br />
readtiers = 0 # ausgeschaltet (default)<br />
readtiers = 1 # ins70 (neue) Methode <br />
readtiers = 2 # ins76 (alte) Methode <br />
<br />
==== boxkey ====<br />
{{Optional}}<br />
Boxkey für Nagravision SCs / CAM key für Irdeto SCs<br />
boxkey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== pincode ====<br />
{{Optional}}<br />
Pincode für '''Conax-, Cryptoworks- und Viaccess-''' Karten.<br />
pincode = code<br />
= # [blank] default<br />
<br />
<br />
==== boxid ====<br />
{{Optional}}<br />
ID der '''NDS-Reciever-Box'''<br />
boxid = NDS box ID<br />
= # [blank] default<br />
<br />
<br />
==== ndsversion ====<br />
{{Optional}}<br />
Version von '''NDS Videoguard''' einsetzen<br />
ndsversion = 0 # autodetection (default)<br />
ndsversion = 1 # NDS Videoguard 1<br />
ndsversion = 12 # NDS Videoguard 1+<br />
ndsversion = 2 # NDS Videoguard 2<br />
<br />
<br />
==== aeskeys ====<br />
{{Optional}}<br />
Multiple AES-Keys für '''Viacces-Karten'''<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
Spezial AES Keys:<br />
00 = schicke keine CW zurück, es ist kein AES-Key spezifiziert<br />
FF = schicke CW zurück, die vom S empfangen wurden, es ist kein AES-Key spezifiziert<br />
<br />
Beispiel<br />
aeskeys = 0100@012345:000102030405060708090a0b0c0d0e0f;0200@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6624;04/23/2012</span><br />
{{Optional}}<br />
Anzahl der Subscritions-Klassen für '''Viacces'''<br />
schowcls = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== key ====<br />
{{Depends}}<br />
Key für Newcamd remote reader encription<br />
key = DES key<br />
<br />
<br />
==== user ====<br />
{{Optional}}<br />
Username für Remote-Reader.<br />
<br />
Beispiel<br />
user = # xyxyx<br />
<br />
<br />
==== password ====<br />
{{Optional}}<br />
Passwort für Remote-Reader.<br />
<br />
Beispiel<br />
password = # xyxyx<br />
<br />
<br />
==== mg-encrypted ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO</span><br />
<br />
mgcamd encrypted line für '''GBox!'''<br />
<br />
Format:<br />
<br />
mg-encrypted = D: { <IP|hostname> { <local port> <remote port> { <password> { <level> <level> }}}}[,<local MAC address>] # default MAC address=eth0<br />
<br />
default:<br />
mg-encrypted = # [blank] (none)<br />
<br />
<br />
==== services ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' <br />
<br />
Wenn Loadbalancing aktiviert ist, sind folgende Besonderheiten zu berücksichtigen:<br />
* Services sind für den Loadbalancer eine '''Whitelist'''. Das bedeutet, dass alles, was hier eingetragen wird, vom Loadbalancing als Service behandelt wird, den die Karte '''kann'''! Wenn dann z.B. ein "not found" kommt, wird das ignoriert und die Karte wird weiter angefragt, mit dem damit verbundenen traffic!<br />
* Daraus ergibt sich, dass der Eintrag von Services bei '''lokalen''' Karten und Proxies, '''die man genau kennt''', kein Problem darstellt.<br />
* Anders verhält es sich bei Proxies (z.B. CCcam), deren Services '''man nicht kennt'''. Hier ist davon abzuraten, Services einzutragen. In einem solchen Fall sollten vielmehr die Services bestimmt werden, die '''nicht zu berücksichtigen''' sind (Eintrag mit (!)), oder besser eine Filterung über den Parameter '''caid''' erfolgen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Die Anzahl der services, die je reader berücksichtigt werden, ist auf 64 begrenzt, also 64 mal [[service-name][CAID][provid][srvid]]! <br />
<br />
Welche Services kann der Reader. Hierzu muss eine oscam.services vorhanden sein. Die Logik ist hier folgendermaßen (in der angegebenen Reihenfolge):<br />
* Wenn das Feld leer ist (oder ungültig) wird die Anfrage erlaubt.<br />
* Wenn ein negativer Service (also solche mit "!") zutreffend ist, so wird die Anfrage abgewiesen.<br />
* Wenn ein positiver Service zutreffend ist oder es gar keinen positiven Service gibt, so wird die Anfrage erlaubt.<br />
* Wenn keiner der vorigen Punkte zutrifft, so wird die Anfrage abgewiesen.<br />
Dies bedeutet, dass negative Services nur in Einzelfällen nötig sind. Nämlich genau dann, wenn man positive Services hat, davon aber wieder einige ausnehmen will. Dies wird nicht empfohlen, da es hier schnell zu Fehlkonfigurationen kommt. Stattdessen sollte ein zusätzlicher Service angelegt werden, der alle entsprechenden Sender enthält.<br />
services = [!]services[,[!]<services>]...<br />
= [blank] ist default<br />
<br />
Beispiel<br />
services = skywelt,skyweltextra,!skyfilm<br />
# skywelt und skywelt extra sind zugeordnet, skyfilm ist ausgeschlossen<br />
<br />
<br />
==== caid ====<br />
{{Optional}}<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
definiert und mapped CAIDs für Reader<br />
<br />
Beispiele:<br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut für das Beispiel oben)<br />
default: alle CAIDs mit der Maske FFFF<br />
<br />
<br />
==== ident ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Wenn in oscam.conf [global] unter lb_mode loadbalancing aktiviert ist, dann dürfen hier keine Einträge stehen!<br />
<br />
Definiert CAID und Ident '''kartenspezifisch''' für den Reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Beispiel<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] Keine Definition (default)<br />
<br />
<br />
==== class ====<br />
{{Optional}}<br />
Definiert Class '''in hexadecimal''' kartenspezifisch für den Reader:<br />
class = 01,02,!1b,!2b # 01 und 01 ja, 1b und 2b nein<br />
= # [blank] Keine Definition (default)<br />
<br />
<br />
==== chid ====<br />
{{Optional}}<br />
Definiert '''Irdeto'''-ChID für den Reader.<br />
<br />
Beispiel<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
<br />
==== group ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6103:12/21/2011</span><br />
<br />
Jeder Reader muss in einer oder mehrere Gruppen eingetragen sein. Damit lässt sich bestimmen, welcher Client auf welchen Reader Zugriff hat. Gültige Werte 1-64<br />
group = 1....64[,1....64]....<br />
<br />
'''Da ein Eintrag zwingend ist, darf hier kein [blank] als default stehen!'''<br />
<br />
Beispiel<br />
Group = 1 # (eine Gruppe)<br />
Group = 1,4,5 # (mehrere Gruppen)<br />
<br />
<br />
==== audisabled ====<br />
{{Optional}}<br />
Schließt den Reader vom AU (Auto-Updating) aus<br />
audisabled = 1 # ausgeschlossen<br />
= 0 # nicht ausgeschlossen (default)<br />
<br />
<br />
==== auprovid ====<br />
{{Optional}}<br />
Hier kann die Provider-ID festgelegt werden, damit der richtige Reader für das AU zur Verfügung steht<br />
<br />
Beispiel<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
<br />
==== disableserverfilter ====<br />
{{Optional}}<br />
Ignoriert CAID und Ident-Einstellungen des Readers bei fehlerhaften Clients.<br />
disableserverfilter = 1 # ignoriert<br />
= 0 # ignoriert nicht (default)<br />
<br />
<br />
==== inactivitytimeout ====<br />
{{Depends}}<br />
Für alle TCP-basierende remote Reader<br />
<br />
inactivitytimeout = # in Sekunden<br />
= -1 # Verbindet '''newcamd''' basierende Reader bei einem Netzwerkausfall erneut (auch im Leelauf - idle -)<br />
= 0 # default<br />
<br />
<br />
==== reconnecttimeout ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7244:08/07/2012</span><br />
<br />
Zeitspanne in Sekunden für eine Wiederverbindung mit einem Remote-Reader, wenn Antworten ausbleiben<br />
<br />
Beispiel<br />
reconnecttimeout = 20 # Nach 20 Sekunden ohne Antworten wird wiederverbunden<br />
= # [blank] default 30 Sekunden<br />
<br />
<br />
==== connectoninit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = Ermöglicht die Herstellung einer Newcamd-Verbindung, solange noch kein Request vorliegt<br />
0 = default<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = ermöglicht es einem cs378x TCP socket, ständig verbunden zu sein<br />
0 = Immer eingeschaltet bei einem cacheex reader type (default)<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Definiert diesen Reader als Fallback. Standard- und Fallback-Reader müssen in der selben Gruppe sein. Siehe '''group'''!<br />
fallback = 1 # Fallbackreader<br />
= 0 # Kein Fallbackreader (default)<br />
<br />
'''Info:'''<br />
<br />
Ist Loadbalancing aktiviert, und zusätzlich der Parameter "cwcycle_allowbadfromffb = 1", wird dieser Reader ein fixed Fallback für CacheEx.<br />
Somit wird er verwendet wenn ein Bad Cycle erkannt wird, damit freetzer entsprechend verhindert werden können.<br />
--> siehe [[OSCam/de/Config/oscam.conf#cwcycle_allowbadfromffb|cwcycle_allowbadfromffb]]<br />
<br />
<br />
==== fallback_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
Benutze den Reader nur als fallback für vorher definierte CAIDs, two-digit wildcards sind möglich. Dieser Parameter überschreibt den Parameter fallback!<br />
Default = none<br />
<br />
Beispiel:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional}}<br />
Definition des EMM-Caches für den Reader. Derzeit nur für lokale Reader. Betrifft die AU-Funktion. Damit kann entschieden werden, ob Update-Kommandos (EMM) vom Provider immer oder nur unter bestimmten Voraussetzungen geschrieben werden.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
Ohne diesen Parameter werden keine EMM im Log angezeigt!<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # cache/stats aus (default)<br />
* <usecache> 1 = # cache/stats ein und schreibe sie in eine Datei wenn oscam beendet wird<br />
* <usecache> 2 = # cache/stats ein, aber schreibe sie beim beenden von oscam <ins>nicht</ins> in eine Datei<br />
<br />
* <rewrite> n = # Wie oft ein und das selbe Update-Kommando (EMM) geschrieben wird. ''Gilt nur bei <usecache> = 1 oder 2''<br />
<br />
* <logging> 0 = # Einträge im Logfile ausgeschaltet (default)<br />
* <logging> 1 = # Nur fehlerhafte EMM werden geloggt<br />
* <logging> 2 = # die geschriebenen (written) EMM werden geloggt<br />
* <logging> 4 = # die zurückgewiesenen (skipped) EMM werden geloggt<br />
* <logging> 8 = # die blockierten (blocked) EMM werden geloggt<br />
* <logging> 16 = # disabled AU werden geloggt<br />
Aufsummieren der Werte ist möglich, 31 wird also alle loggen.<br />
<br />
* <stb-emm> 0 = # EMM für die STB werden ignoriert (default)<br />
* <stb-emm> 1 = # EMM für die STB werden zum Reader gesendet (nur sehr spezifisch nötig)<br />
<br />
Beispiele:<br />
emmcache = 1,3,10,0 # Cache ein, 3 x schreiben, die geschriebenen (2) und die geblockten (8) = 10 loggen, keine stb-emm senden<br />
emmcache = 1,2,6,1 # Cache ein, 2 x schreiben, die geschriebenen (2) und die zurückgewiesenen (4) = 6 loggen, stb-emm senden<br />
<br />
'''stb-emm''': ist nur für einige Viaccess-User sinnvoll (siehe Commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) und '''bestimmt nicht für User mit einer echten Karte im Reader'''.<br />
<br />
Dazu [http://www.streamboard.tv/wbb2/thread.php?postid=538345#post538345 noch ein Zitat vom User ''pr2'']: "In Viaccess sahen wir einige EMM-G, die für die Set-Top-Box(STB) waren und nicht für die Karte, deshalb nennen wir das STB-EMM. Diese EMMs setzen den Overencryption-Key (AES) in der STB für die Verschlüsselung der Kommunikation zwischen STB und Karte."<br />
<br />
<br />
==== emmreassembly ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8591:04/01/2013 Parameter jetzt in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = schaltet Neuaufbau von EMM ein, default<br />
0 = schaltet Neuaufbau von EMM aus<br />
<br />
Sollte bei '''Viaccess und Cryptoworks Readern''' gesetzt werden, wenn der Client, der für das Senden von EMMs benutzt wird, die EMMs neu aufbaut anstelle sie an OScam zur Bearbeitung zu senden.<br />
<br />
<br />
==== cacheex ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
cacheex = 1 # enable cache exchange pull mode<br />
cacheex = 2 # enable cache exchange push mode<br />
cacheex = 3 # enable cache exchange revers push mode<br />
cacheex = 0 # aus (default)<br />
<br />
Identische modes müssen bei local OSCam server und remote OSCam user account gesetzt werden!<br />
Nur für camd3.5x und CCcam Protokolle!<br />
<br />
Siehe auch entsprechenden Parameter in oscam.user!<br />
<br />
[[Datei:MessageS.png|text-bottom]]'''Ein ausführliches How-To findet man [[Streamboard-Post:406230|hier]]'''<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam A erhält eine ECM Anfrage, reader1 sendet diese Anfrage an OSCam B,<br />
<br />
OSCam B prüft seinen cache:<br />
* im cache wird nichts gefunden: OSCam B sendet: NOK<br />
* im cache wird etwas gefunden; OSCam B sendet: OK+CW<br />
* im cache wird nichts gefunden aber es wird eine anstehende Anfrage festgestellt: ''cacheexwaittime'' in oscam.conf [global] wird abgewartet und dann erneut geprüft. OSCam B fragt nicht mehr nach neuen EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 2<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 2<br />
<br />
Wenn OSCam B ein CW erhält, wird es auf OSCam A geschoben. Der Reader hat normale Funktionen und kann ECMs anfragen.<br />
* Problem: OSCAM kann nur dann CW's auf OSCam A schieben, wenn OSCam A verbunden ist<br />
* Problem oder feature?: OSCam A kann ECMs von OSCam B anfragen<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 ist gesetzt auf cacheex = 3<br />
<br />
Wenn OSCam A ein CW erhält, wird dies auf OSCam B geschoben. OSCam A fragt nicht mehr nach neuen ECMs<br />
<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = Anzahl der hops<br />
= default = 10<br />
<br />
Festlegen der maximalen hops für cache exchange. Zum pushen des lokalen caches 1 eintragen. Der Eintrag cacheex_maxhop = 0 bewirkt nur, dass der default-Wert von 10 genommen wird.<br />
<br />
<br />
==== logport ====<br />
{{Optional}}<br />
Logport für einen '''Camd 3.x'''-Reader. UDP muss aktiviert sein. Funktioniert nur, wenn in Camd 3.x kein Cascading stattfindet!<br />
logport = Port-Nummer<br />
= # kein Logport (default)<br />
<br />
<br />
==== ecmwhitelist ====<br />
{{Optional}}<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
definiert die gültige ECM-Länge in '''hex''' und provid für physische Reader<br />
<br />
Beispiel:<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = keine (default) und provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Im normalen Betrieb ist dieser Parameter nicht erforderlich!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|Liste mit ECM-Längen]]'''<br />
<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
Gültige ECM-Header mit CAID und provid '''in hex''' einsetzen.<br />
<br />
default: none, provid = 000000<br />
<br />
Ein Thread dazu ist [[Streamboard-Thread:34748|hier]] zu finden.<br />
<br />
Und hier findet man eine ständig gepflegte [[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] .<br />
<br />
<br />
==== ratelimitecm ====<br />
{{Optional}}<br />
Anzahl der unterschiedlichen SIDs die in ECMs innerhalb eines Intervalls erlaubt sind<br />
ratelimitecm = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = Anzahl<br />
<br />
Anzahl der ECM's mit "not found" Anwort bis der Reader neu gestartet wird, 0 = kein Limit (default)<br />
<br />
<br />
==== resetcycle ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5821:08/12/2011</span><br />
<br />
Anzahl von ECM's bis ein Reset des Cardreaders durchgeführt wird<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
resetcycle = 5 # Reset nach 5 ECM's<br />
= 0 # ausgeschaltet [default]<br />
<br />
<br />
==== ratelimittime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
Intervall für ein ratelimit<br />
ratelimittime = Millisekunden<br />
= 0 # (default)<br />
<br />
<br />
==== ecmunique ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = ermöglicht eine Überprüfung des matching ECM hash im ratelimit slot<br />
0 = default<br />
<br />
<br />
==== srvidholdtime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
srvidholdtime = Millisekunden<br />
<br />
Zeitraum, in dem die Service-ID im ratelimit slot gehalten werden soll. Während dieses Zeitraums ist der Zeit-Check für ecmunique ausgeschaltet. Default = 0<br />
<br />
<br />
==== cooldowndelay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5946:09/09/2011</span><br />
<br />
cooldowndelay <br />
<br />
Erläuterung:<br />
delay = Verzögerungszeit in Sekunden, in der dem Reader erlaubt ist, mehr ECM-Anfragen zu stellen,<br />
als im Parameter "ratelimitecm" festgelegt ist<br />
default: [blank] keine<br />
duration = Zeitdauer in Sekunden, die der Reader für einen cooldown benötigt<br />
default: [blank] keine<br />
<br />
'''Voraussetzung ist, dass die Parameter "ratelimitecm" und "ratelimittime" ausgefüllt sind!'''<br />
<br />
<br />
==== block and save ====<br />
Zur Thematik block, save, select und write EMM gibt es hier [[http://www.streamboard.tv/wiki/EMM]] ein besonderes Wiki!<br />
<br />
<br />
===== blocknano =====<br />
{{Optional}}<br />
Liste zu blockender EMM-Nanos (in hex) oder aller EMM-Nanos. Gilt nur für physikalische Reader!<br />
<br />
Beispiel<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
<br />
===== blockemm-u =====<br />
{{Optional}}<br />
''unique address-EMMs, entspricht D3 bei Sk*''<br />
blockemm-u = 1 # Blocke EMMs, die an die Karte direkt adressiert sind)<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-s =====<br />
{{Optional}}<br />
''shared address-EMMs, entspricht D2 bei Sk*''<br />
blockemm-s = 1 # Blocke EMMs, die an bestimmte Gruppen von Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-g =====<br />
{{Optional}}<br />
''global address-EMMs, entspricht D0 bei Sk*''<br />
blockemm-g = 1 # Blocke EMMs, die an alle Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-unknown =====<br />
{{Optional}}<br />
Blockiert alle unbekannten Arten von EMM<br />
blockemm-unknown = 1 # Blocke alle unbekannten Arten von EMMs<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-bylen =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8615:04/12/2013</span><br />
<br />
Blockiere alle Arten von EMMs anhand der Länge. Es werden maximal 10 Werte zugelassen.<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
= # [blank] keine Blockierung (default)<br />
<br />
Beispiel:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br />
===== via_emm_global =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9843:09/05/2014</span><br />
<br />
via_emm_global = 0|1<br />
<br />
ermöglicht die Filterung von globalen emm für '''viacces'''<br />
<br />
'''ausschließlich für camd35 (cs357x) Protokoll!'''<br />
<br />
0 = default<br />
<br />
<br />
===== saveemm-u =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unique-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-u = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-s =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere shared-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-s = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-g =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere global-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-g = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-unknown =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unknown-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-unknown = 1<br />
= 0 # (default)<br />
<br />
===== needsglobalfirst =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn11494:02/03/2019</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Nur für Cryptoworks Karten mit den CAIDs 0D96 & 0D98'''<br />
<br />
Ist der Parameter gesetzt, wird nur noch ein global EMM pro shared EMM geschrieben. Der Rest der global EMMs wird geblockt. Dazu darf das Schreiben der global und shared EMMs nicht generell geblockt sein. Also Vorrausetzung ist: blockemm-s = 0 und blockemm-g = 0.<br />
<br />
needsglobalfirst = 0|1 - 0 default<br />
<br />
Beispiel<br />
needsglobalfirst = 1<br />
blockemm-g = 0<br />
blockemm-s = 0<br />
<br />
===== savenano =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn5947:09/09/2011</span><br />
<br />
Liste von EMM-Nanos, die gespeichert werden sollen (hex) oder alle EMM-Nanos. Der Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
<br />
===== readnano =====<br />
{{Optional}}<br />
Schreibt ein File (üblicherweise eine Copy des von savenano gesicherten files) in die SC. Wenn kein Pfad angegeben ist, wird danach im Konfigurations-Verzeichnis gesucht. <br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
readnano = /var/oscam/write.emm # Beispiel Pfad/Dateiname<br />
= write.emm # Nur Dateiname<br />
= # [blank] es wird kein File geschrieben (default)<br />
<br />
<br />
==== use-ssl ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
use_ssl = 1 # benutze SSL für ghttp protocol<br />
= 0 # default<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # weise falsche CW's zurück, sende "not found" an Stelle falscher CWs<br />
= 0 # default<br />
<br />
Die Option hat nur eine Wirkung auf dem oscam Server (oscam.server, [reader]), der die Karte direkt anspricht, also nicht auf einem Client. Betroffene Karten: CSAT (0100:003311)<br />
<br />
<br />
==== disablecrccws ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6004:10/26/2011</span><br />
<br />
disablecrccws = 1 # unterdrücke den cw-checksum-test<br />
= 0 # cw-checksum-test eingeschaltet (default)<br />
<br />
Hier mal eine Erklärung von Bit aus dem SB:<br />
<br />
Das ist für den dänischen Provider BoxerTV.<br />
Die haben Gegenmassnahmen eingeleitet und die VIA Karten verdauen keine Checksum-korrigierten CWs mehr. Damit kann man die CW checksummenkorrektur bei diesen readern ausschalten.<br />
Dann geht's wieder bei BoxerTV-readern.<br />
(dropbadcws muss dann auf aus sein).<br />
...<br />
PS: die checksummenkorrektur ausschalten ist böse und entgegen des DVB-Standards! Benutzt diesen Parameter nur wenn Ihr ihn wirklich benötigt!<br />
<br />
====disablecrccws_only_for====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID<br />
<br />
Exemple :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
<br />
==== lb_weight ====<br />
{{Optional}}<br />
Je höher dieser Wert, desto größer ist die Wahrscheinlichkeit, dass dieser Reader ausgesucht wird. Es ist ein Indikator für die durchschnittliche Antwortzeit innerhalb des Loadbalancing<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
<br />
Abwärts die durchschnittliche Antwortzeit des Readers. Von rechts nach links der Wert lb_weight. <br />
Im Mittelfeld könnt Ihr ablesen, wie die durchschnittliche Antwortzeit durch den lb_weight wert "korrigiert" wird.<br />
<br />
<br />
'''Beispiel:'''<br />
<br />
Du hast 2 Reader die beide eine durchschnittliche Antwortzeit von 400ms haben. Nun möchtest Du aber einen Reader bevorzugen indem Du dem Loadbalancer 300ms vorgaukeln willst.<br />
<br />
Also suchst Du die Zeile die mit 400 beginnt und wanderst auf dieser Zeile nach rechts bis du bei ~300 (in der tabelle findest du nur 30cool bist. Dann liest Du oben den Wert für lb_value ab den der Reader bekommt (130). Diesen trägst Du bei dem Reader ein und schon wird der Reader bevorzugt<br />
<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional}}<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
Zuordnung von Services an den Reader, welche durch den Loadbalancer nie geblockt werden sollen, default=none<br /><br />
<br />
<br />
==== lb_force_fallback ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = setzt den Reader ständig in fallback-modus für das load balancing ohne Berücksichtigung der reader statistics,<br /><br />
0 = default<br />
<br />
<br />
==== ccc ====<br />
===== cccversion =====<br />
{{Depends}}<br />
'''Nur für CCcam'''<br />
<br />
Definiert die Version von CCcam, die verwendet werden soll.<br />
<nowiki><mainversion>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
cccversion = 1.2.34<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
===== cccmaxhops =====<br />
{{Depends}}<br />
Legt das Maximum an Distance-Hops für die Karte fest<br />
0 = Nur lokale Karte<br />
1 = Lokale Karte + 1 Hop<br />
2 = Lokale Karte + 2 Hops<br />
und so weiter<br />
Default-Wert = 10<br />
<br />
<br />
===== ccchop =====<br />
{{Depends}}<br />
ccchop = hop<br />
<br />
Setzt den hop für '''nicht'''-cccam-reader<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Definiert den reshare-hop für CCcam-Reader<br />
<br />
cccreshare = hop<br />
= -1 # kein reshare<br />
= 0 # reshare für direct peer <br />
= 1 # reshare für direct peer und den nächsten Level<br />
= x # reshare für direct peer und die nächsten x (Anzahl) Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
===== cccwantemu =====<br />
{{Depends}}<br />
Anfrage, auch einen emu vom CCcam-Server zu erhalten.<br />
cccwantemu = 1 # ja<br />
= 0 # nein default<br />
<br />
<br />
===== ccckeepalive =====<br />
{{Depends}}<br />
Sendet eine "keepalive-message", um eine Verbindung zum remote CCCam-Server zu erhalten.<br />
ccckeepalive = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
===== cccreconnect =====<br />
{{Optional}}<br />
cccreconnect = timeout (ms)<br />
<br />
default = 12000 (ms)<br />
<br />
Wiederverbindung nach ECM-Request-Timeout in Millisekunden.<br />
Gilt nur für O-cccam reader, für cccam-ext Protokoll wird diese Zeit ignoriert.<br />
<br />
<br />
===== cccmindown =====<br />
{{Depends}}<br />
cccmindown = # Zahl<br />
= 0 default<br />
<br />
Filtert alle Reader mit hops, die kleiner sind als die eingesetzte Zahl<br />
<br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBOX läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
===== device =====<br />
{{Mandatory}}<br />
device = Komma-separierte Liste mit den Werten<br />
<br />
peer's IP oder Hostname<br />
peer's port<br />
<br />
Beispiel:<br />
device = 192.168.1.101,3820<br />
<br />
<br />
===== password =====<br />
{{Mandatory}}<br />
password = 4 hex bytes, 8 chars<br />
<br />
Peer Passwort<br />
<br />
Beispiel:<br />
password = A123BCDE<br />
<br />
===== gbox_reshare =====<br />
{{Optional}}<br />
Reshare-Level für lokale Karte(n), default = 2<br />
<br />
===== gbox_max_distance =====<br />
{{Optional}}<br />
gbox_max_distance = maximale Distanz zum Empfang von peer-cards, default = 2<br />
<br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional}}<br />
gbox_max_ecm_send = sende ecm zu maximal n peer cards, default = 3<br />
<br />
<br />
===== user =====<br />
{{Mandatory}}<br />
Benutzername (client) der oscam Gbox<br />
<br />
Beispiel<br />
user = gbox_client<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
'''Der user muss auch in der oscam.user als [account] eingetragen werden.'''<br />
<br />
'''Man sollte unbedingt für jeden gbox [reader] einen anderen user [account] benutzen.'''<br />
'''Nur dann sind die Peers im Log usw unterscheidbar.'''<br />
<br />
'''Unter [reader] und [account] sollten geeignete Filter gesetzt werden (services=, caid=, ident=), um Instabilitäten der GBOX durch<br />
'''Überfluten mit Karten zu vermeiden.'''<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.server&diff=13505
OSCam/de/Config/oscam.server
2019-02-04T18:28:45Z
<p>Felixka: /* needsglobalfirst */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.server''' ==<br />
Diese Konfigurationsdatei enthält Reader-Parameter für OSCam. Die Abschnitte dürfen sich wiederholen (mehr als ein Reader möglich). Es muss aber in jedem Fall mindestens ein reader konfiguriert sein!<br />
<br />
Beispiel-Konfiguration für die wichtigsten Reader sind hier zu finden [[OSCam/de/examples/Reader|Beispiel-Konfigurationen]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
<br />
=== '''Reader''' ===<br />
'''Grundsatz:''' Es können mehrere [reader]-Abschnitte erstellt werden. Jeder vollständige Abschnitt wird dann als Reader verwendet. Er '''muss''' immer mit [reader] beginnen. Im Parameter "label" kann dann die Art des Readers beschrieben werden:<br />
<br />
Beispiele: easymouse, phönix, smargo, sc8in1 usw.<br />
<br />
<br />
==== label ====<br />
{{Mandatory}}<br />
<br />
Legt den Namen für diesen Reader fest.<br />
<br />
'''Der Name des Labels darf nicht identisch zu einem Usernamen (oscam.users) sein!'''<br />
<br />
<br />
Beispiel<br />
label = easymouse2<br />
<br />
<br />
==== enable ====<br />
{{Optional}}<br />
Reader aktivieren/deaktivieren<br />
enable = 0 # Reader aus<br />
= 1 # Reader ein (default)<br />
<br />
==== description ====<br />
{{Optional}}<br />
description = Text <br />
<br />
Beliebiger Text zur Beschreibung des readers; default: [blank] keine Beschreibung<br />
<br />
'''Nicht zu verwechseln mit ''label''!''' Hier kann zusätzlich eine Information hinterlegt werden, z.B. Reader nur für CI+ usw.<br />
<br />
<br />
==== protocol ====<br />
{{Mandatory}}<br />
Kommunikationsprotokoll für den Reader.<br />
protocol = mouse # (Lokaler Cardreader)<br />
= internal # (Alle Cardreader mit einem "Device=/dev/sciX", sowie interne Coolstream-Reader)<br />
= camd35|cs357x # (Cascading - camd 3.5-kompatibler Remote-Server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x # (camd 3.5-kompatibler Remote-Server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1 # (SC8in1 und MCR 4/8 Cardreader)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''smartreader:''' Es können Probleme auftreten, wenn der Cardreader im smartreader-Modus in einem USB-Hub betrieben wird.<br />
In diesem Fall den Cardreader direkt am PC/Receiver einstecken und erneut testen.<br />
Sollte es dann funktionieren, ggf. einen anderen USB-Hub besorgen.<br />
<br />
<br />
==== device ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8911:09/10/2013</span><br />
<br />
Legt den local oder remote reader Abschnitt [reader] fest:<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw <br />
<br />
Bestimmt den reader type:<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3 <br />
bus:device: Bus- und Device-Namen von Smartreader+ oder Infinity USB (mit lsusb 'Bus' und 'Device' holen)<br />
serialnum: Serial-Nummer des Smartreader+ oder Infinity USB<br />
device: Name der Device<br />
device:slot: device name und slot-nummer '''für sc8in1''' (1-8)<br />
'''Es wird nur ein SC8in1 unterstützt!'''<br />
ip|hostname: IP-Adresse oder Hostname<br />
port: TCP/IP port <br />
lport: Remapping für den Local-Port (TCP/IP)<br />
PCSC: Nummer des PCSC-Readers (mit 0 starten!)<br />
Alternativ kann über den Namen des Readers (bzw. einen Teil davon) selektiert werden, z.B. "-1:SCR 3310" (Namen der erkannten Reader werden bei "oscam -d 32" ausgegeben)<br />
0|1: '''Nur für die Coolstream HD-1''' (Reader 0 oder 1 auswählen)<br />
constantcw: Dateiname für das Constant-CW-File<br />
<br />
Format des CW-Files: <br />
'''Standard-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
Beispiele für device--parameter:<br />
device = /dev/ttyS0 # Reader an COM1 (bei Linux i386 und Windows)<br />
device = /dev/tts/1 # Reader an COM2 (Linux dbox2 mit multicam)<br />
device = /dev/ttyUSB0 # Reader an USB (Linux i386)<br />
device = Serial:Reader 1 # z.B. Smargo im smartreader-Modus, wobei die Kennung "Reader 1" der Smargo-Konfiguration zu entnehmen ist!<br />
device = /var/keys/constant.cw # Einbindung eines constantcw<br />
device = /dev/ttyUSB0:1 # Slot 1 eines SC8in1 oder MCR 4/8 (Linux i386)<br />
<br />
'''Hinweis:''' Der Zähler für die Device liegt immer um 1 hinter der Nummer des COM-Ports! Also ttyS0 = COM1, tts/1 = COM2. Bei Benutzung neuerer PC sind kaum noch serielle Anschlüsse vorhanden, sodass in diesen Fällen USB 2.0 benutzt werden muss. Hier am besten im Gerätemanager des PC nachschauen, welcher COM-Port dem Reader zugewiesen wurde und in die Device den Port -1 eintragen!<br />
<br />
==== detect ====<br />
{{Depends}}<br />
Der Card Status (Karte im Reader eingeführt oder entfernt) wird detektiert mit Hilfe einer handshake input Leitung der seriellen Schnittstelle (UART/SCI) - cd, cts, dsr oder ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" bedeutet: Keine Leitung zum detektieren des Card Status vorhanden. Karte wird immer als im Kartenleser gesteckt erkannt.<br />
<br />
* Falls das detect signal invertiert ist: prefix "!" (eg "detect = !cts")<br />
<br />
<br />
Falls Parameter '''use_gpio = 1''' gesetzt ist:<br />
<br />
detect = gpio1...gpio7 - Card Status wird über einen gpio erfasst. GPIO means "general purpose input output". <br />
<br />
<br />
Beispiel:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
'''protocol = mouse'''<br />
'''device = /dev/ttyUSB0''' (easymouse 2)<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends}}<br />
Benutze gpio als card detect/ reset. Siehe auch '''detect ='''<br />
use_gpio = 0|1 #default = 0<br />
<br />
==== cardmhz ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
'''Standard'''-Frequenz der Karte in Schritten von 10 KHz. Für Irdeto-Karten z.B. "cardmhz = 600" (6 Mhz)<br />
<br />
Beispiel:<br />
cardmhz = 600 # Irdetokarte<br />
= # [blank] Default-Wert 357<br />
<br />
'''Interne-Dreambox-Leser'''<br />
<br />
Wenn cardmhz >2000 eingetragen wird aktiviert OScam den PLL-Clock. Interne-Dreambox-Leser (Dream Multimedia GmbH und Clones) können damit optimal getaktet werden.<br />
<br />
Der verwendete cardmhz-wert entspricht dem höchsten PLL-Takt. OSCam wird dann den optimalen PLL-Teiler berechnen damit die Frequenz möglichst nahe an den Wert kommt welcher bei "mhz" definiert wurde.<br />
<br />
Benutze die folgenden Einstellungen:<br />
<br />
Modelle mit PPC-CPU (DM500/DM600/DM7000/DM7020): "cardmhz = 3150"<br />
<br />
Modelle mit MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.): "cardmhz = 2700"<br />
<br />
Die DM7025 ist speziell: "cardmhz = 8300"<br />
<br />
'''Wird nur der Parameter cardmhz gesetzt (ohne mhz = xxx) wird die Karte automatisch anhand des ATR getaktet!'''<br />
<br />
Beispiel:<br />
Du hast eine Dream 800 HD PVR, das ist eine MIPS, daher muss du "cardmhz = 2700" setzen. Nehmen wir an du hast eine Nagra-Karte welche auf 5 MHz laufen soll.<br />
Wenn du die Karte richtig takten willst verwende "cardmhz = 2700" und "mhz = 500", Oscam taktet die Karte dann mit der nächst möglichen Frequenz (4.50 Mhz).<br />
Möchtest du sie übertakten, dann verwende "cardmhz = 2700" und z.B. "mhz = 900".<br />
Deine Karte läuft nun auf 9 Mhz. Aber vorsichtig, eine übertaktete Karte kann heiss und instabil werden! ([[OSCam/de/examples/Overclocking|Overclocking]] beachten!)<br />
<br />
Viele Interne-Leser von anderen Herstellern als Dream ignorieren die eingestellten Werte! Aber du solltest "cardmhz" und mhz" trotzdem setzen da es zum berechnen der richtigen "timings" verwendet wird. Wenn du cardmhz/mhz richtig setzt ist das "timing" besser für die aktuelle (automatisch gesetzte) Frequenz des Internen-Lesers. Als Ergebnis bekommst du bessere ECM-Zeiten oder mehr Stabilität.<br />
<br />
Erwarte keine Wunder, nur ein übertakten der Karte bringt bessere ECM-Zeiten. Schlechtes "timing" kann jedoch zu verzögerungen führen oder die Karte instabil machen.<br />
<br />
'''Nützliche Links:'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|Liste verschiedener Karten und ihren Frequenzen]]'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
==== mhz ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
mhz = Frequenz in KHz<br />
<br />
Sofern dies technisch möglich ist kann abweichend von '''cardmhz''' die Frequenz des Kartenlesers anders (in der Regel höher) als die Standard-Frequenz der Karte eingestellt werden (in 10 KHz-Schritten). Man spricht dann von [[OSCam/de/examples/Overclocking|Overclocking]]. So kann z.B. eine S02-Karte (Standard 6 MHz) mit 10 MHz übertaktet werden.<br />
<br />
Beispiel Externe-Reader:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
Beispiel DM800:<br />
cardmhz = 2700 # (27MHz PLL)<br />
mhz = 900 # (Wert wird berechnet -> 27Mhz : 3 = 9 Mhz)<br />
<br />
Hier eine ausführlichere Beschreibung von '''stefansat''' aus der Distri-Doku:<br />
<br />
Wenn die Frequenz in '''mhz''' größer ist als in '''cardmhz''', dann befindest Du dich im [[OSCam/de/examples/Overclocking|Overclocking]] Modus.<br />
<br />
Smargo-Reader und interne Reader der Dreamboxen werden durch den '''ATR''' automatisch eingestellt, wenn '''autospeed = 1''' (siehe nächsten Parameter) gesetzt ist.<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
<br />
==== autospeed ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
1 = setzt den mhz-Wert anhand des ATR (default)<br />
0 = disabled<br />
<br />
<br />
==== deprecated ====<br />
{{Optional}}<br />
Zuerst wird die Smartcard im Normal-Modus initialisiert. Schlägt dies fehl, wird die Initialisierung automatisch auf den veralteten Modus umgeschaltet, so dass die Smartcard-Geschwindigkeit nicht verändert wird und die Kommunikation auf normaler ATR Geschwindigkeit von 9600 Baud bleibt.<br />
deprecated = 1 # ausschließlich veralteter Modus<br />
= 0 # default<br />
<br />
<br />
==== mode ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Nur für AZBox'''<br />
<br />
mode = 1 # AzBox-Reader<br />
= 0 # default<br />
Setzt den Init-Mode für die Karte im internen AZBox-reader<br />
<br />
<br />
==== device_out_endpoint ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8013:12/29/2012</span><br />
<br />
Setzt die Addresse des Endpunkts für FTDI-Chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
<br />
==== smargopatch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet den workaround für smargoreader+ und reader ein, bis der native mode funktioniert<br />
smargopatch = 1<br />
= 0 (default)<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet fix für SC8in1/MCR DTR/RTS kernel bug ein<br />
sc8in1_dtrrts_patch = 1<br />
= 0 # (default)<br />
<br />
<br />
==== cool_timeout_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6286:01/23/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Setzt beim init der SC einen timeout in Millisekunden fest (im internen Reader).<br />
cool_timeout_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Hier kann ein timeout der SC für read/transmit nach dem init in Millisekunden festgelegt werden (nur für interne Reader).<br />
cool_timeout_after_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9568:03/16/2014</span><br />
<br />
Fügt einen Controll-Check für Pin Payload von NDS Videoguard Karten hinzu (4 Hex-Bytes). '''Gültig nur für physikalische Reader'''<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
<br />
==== ins7e ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5959:09/22/2011</span><br />
<br />
Füge 26 hex-bytes payload für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e = payload<br />
= # [blank] default (none)<br />
<br />
<br />
==== ins7e11 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6064:12/06/2011</span><br />
<br />
Füge TA1 für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e11 = TA1 Byte<br />
= # [blank] default (none)<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
<br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9884:09/30/2014</span><br />
{{Optional}}<br />
schaltet den 0x07-EMM-Fix für NDS Videoguard 2 Karten ein. '''Gültig nur für physikalische Reader'''<br />
fix07 = 1 # 0x07-EMM-Fix eingeschaltet (default)<br />
= 0 # ausgeschaltet <br />
<br />
<br />
==== force_irdeto ====<br />
{{Optional}}<br />
Forciert den Irdeto-Modus, auch wenn ein RSA-Key für Irdeto getunnelte Nagravisions-Karte vorliegt.<br />
force_irdeto = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
==== nagra_read ====<br />
{{Optional}}<br />
Lese Nagravision-Records. '''Nur für NCMED-Karten'''<br />
nagra_read = 0 # ausgeschaltet (default)<br />
= 1 # lese alle Records mit abgelaufenen Rechten<br />
= 2 # lese nur Records mit gültigen Rechten<br />
<br />
<br />
==== rsakey ====<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7046:06/12/12</span><br />
{{Optional}}<br />
<br />
RSA key für Nagravision/Tiger SCs / CAM key data für Irdeto SCs, Conax SCs<br />
rsakey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== fix9993 ====<br />
{{Optional}}<br />
fix9993 = 0|1<br />
<br />
Fixed den error 9993 bei CAID 0919 SC's<br />
<br />
fix9993 = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== readtiers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
Methode wie die Tiers von NDS Videoguard Smartcards ausgelesen werden.<br />
<br />
readtiers = 0 # ausgeschaltet (default)<br />
readtiers = 1 # ins70 (neue) Methode <br />
readtiers = 2 # ins76 (alte) Methode <br />
<br />
==== boxkey ====<br />
{{Optional}}<br />
Boxkey für Nagravision SCs / CAM key für Irdeto SCs<br />
boxkey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== pincode ====<br />
{{Optional}}<br />
Pincode für '''Conax-, Cryptoworks- und Viaccess-''' Karten.<br />
pincode = code<br />
= # [blank] default<br />
<br />
<br />
==== boxid ====<br />
{{Optional}}<br />
ID der '''NDS-Reciever-Box'''<br />
boxid = NDS box ID<br />
= # [blank] default<br />
<br />
<br />
==== ndsversion ====<br />
{{Optional}}<br />
Version von '''NDS Videoguard''' einsetzen<br />
ndsversion = 0 # autodetection (default)<br />
ndsversion = 1 # NDS Videoguard 1<br />
ndsversion = 12 # NDS Videoguard 1+<br />
ndsversion = 2 # NDS Videoguard 2<br />
<br />
<br />
==== aeskeys ====<br />
{{Optional}}<br />
Multiple AES-Keys für '''Viacces-Karten'''<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
Spezial AES Keys:<br />
00 = schicke keine CW zurück, es ist kein AES-Key spezifiziert<br />
FF = schicke CW zurück, die vom S empfangen wurden, es ist kein AES-Key spezifiziert<br />
<br />
Beispiel<br />
aeskeys = 0100@012345:000102030405060708090a0b0c0d0e0f;0200@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6624;04/23/2012</span><br />
{{Optional}}<br />
Anzahl der Subscritions-Klassen für '''Viacces'''<br />
schowcls = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== key ====<br />
{{Depends}}<br />
Key für Newcamd remote reader encription<br />
key = DES key<br />
<br />
<br />
==== user ====<br />
{{Optional}}<br />
Username für Remote-Reader.<br />
<br />
Beispiel<br />
user = # xyxyx<br />
<br />
<br />
==== password ====<br />
{{Optional}}<br />
Passwort für Remote-Reader.<br />
<br />
Beispiel<br />
password = # xyxyx<br />
<br />
<br />
==== mg-encrypted ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO</span><br />
<br />
mgcamd encrypted line für '''GBox!'''<br />
<br />
Format:<br />
<br />
mg-encrypted = D: { <IP|hostname> { <local port> <remote port> { <password> { <level> <level> }}}}[,<local MAC address>] # default MAC address=eth0<br />
<br />
default:<br />
mg-encrypted = # [blank] (none)<br />
<br />
<br />
==== services ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' <br />
<br />
Wenn Loadbalancing aktiviert ist, sind folgende Besonderheiten zu berücksichtigen:<br />
* Services sind für den Loadbalancer eine '''Whitelist'''. Das bedeutet, dass alles, was hier eingetragen wird, vom Loadbalancing als Service behandelt wird, den die Karte '''kann'''! Wenn dann z.B. ein "not found" kommt, wird das ignoriert und die Karte wird weiter angefragt, mit dem damit verbundenen traffic!<br />
* Daraus ergibt sich, dass der Eintrag von Services bei '''lokalen''' Karten und Proxies, '''die man genau kennt''', kein Problem darstellt.<br />
* Anders verhält es sich bei Proxies (z.B. CCcam), deren Services '''man nicht kennt'''. Hier ist davon abzuraten, Services einzutragen. In einem solchen Fall sollten vielmehr die Services bestimmt werden, die '''nicht zu berücksichtigen''' sind (Eintrag mit (!)), oder besser eine Filterung über den Parameter '''caid''' erfolgen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Die Anzahl der services, die je reader berücksichtigt werden, ist auf 64 begrenzt, also 64 mal [[service-name][CAID][provid][srvid]]! <br />
<br />
Welche Services kann der Reader. Hierzu muss eine oscam.services vorhanden sein. Die Logik ist hier folgendermaßen (in der angegebenen Reihenfolge):<br />
* Wenn das Feld leer ist (oder ungültig) wird die Anfrage erlaubt.<br />
* Wenn ein negativer Service (also solche mit "!") zutreffend ist, so wird die Anfrage abgewiesen.<br />
* Wenn ein positiver Service zutreffend ist oder es gar keinen positiven Service gibt, so wird die Anfrage erlaubt.<br />
* Wenn keiner der vorigen Punkte zutrifft, so wird die Anfrage abgewiesen.<br />
Dies bedeutet, dass negative Services nur in Einzelfällen nötig sind. Nämlich genau dann, wenn man positive Services hat, davon aber wieder einige ausnehmen will. Dies wird nicht empfohlen, da es hier schnell zu Fehlkonfigurationen kommt. Stattdessen sollte ein zusätzlicher Service angelegt werden, der alle entsprechenden Sender enthält.<br />
services = [!]services[,[!]<services>]...<br />
= [blank] ist default<br />
<br />
Beispiel<br />
services = skywelt,skyweltextra,!skyfilm<br />
# skywelt und skywelt extra sind zugeordnet, skyfilm ist ausgeschlossen<br />
<br />
<br />
==== caid ====<br />
{{Optional}}<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
definiert und mapped CAIDs für Reader<br />
<br />
Beispiele:<br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut für das Beispiel oben)<br />
default: alle CAIDs mit der Maske FFFF<br />
<br />
<br />
==== ident ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Wenn in oscam.conf [global] unter lb_mode loadbalancing aktiviert ist, dann dürfen hier keine Einträge stehen!<br />
<br />
Definiert CAID und Ident '''kartenspezifisch''' für den Reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Beispiel<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] Keine Definition (default)<br />
<br />
<br />
==== class ====<br />
{{Optional}}<br />
Definiert Class '''in hexadecimal''' kartenspezifisch für den Reader:<br />
class = 01,02,!1b,!2b # 01 und 01 ja, 1b und 2b nein<br />
= # [blank] Keine Definition (default)<br />
<br />
<br />
==== chid ====<br />
{{Optional}}<br />
Definiert '''Irdeto'''-ChID für den Reader.<br />
<br />
Beispiel<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
<br />
==== group ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6103:12/21/2011</span><br />
<br />
Jeder Reader muss in einer oder mehrere Gruppen eingetragen sein. Damit lässt sich bestimmen, welcher Client auf welchen Reader Zugriff hat. Gültige Werte 1-64<br />
group = 1....64[,1....64]....<br />
<br />
'''Da ein Eintrag zwingend ist, darf hier kein [blank] als default stehen!'''<br />
<br />
Beispiel<br />
Group = 1 # (eine Gruppe)<br />
Group = 1,4,5 # (mehrere Gruppen)<br />
<br />
<br />
==== audisabled ====<br />
{{Optional}}<br />
Schließt den Reader vom AU (Auto-Updating) aus<br />
audisabled = 1 # ausgeschlossen<br />
= 0 # nicht ausgeschlossen (default)<br />
<br />
<br />
==== auprovid ====<br />
{{Optional}}<br />
Hier kann die Provider-ID festgelegt werden, damit der richtige Reader für das AU zur Verfügung steht<br />
<br />
Beispiel<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
<br />
==== disableserverfilter ====<br />
{{Optional}}<br />
Ignoriert CAID und Ident-Einstellungen des Readers bei fehlerhaften Clients.<br />
disableserverfilter = 1 # ignoriert<br />
= 0 # ignoriert nicht (default)<br />
<br />
<br />
==== inactivitytimeout ====<br />
{{Depends}}<br />
Für alle TCP-basierende remote Reader<br />
<br />
inactivitytimeout = # in Sekunden<br />
= -1 # Verbindet '''newcamd''' basierende Reader bei einem Netzwerkausfall erneut (auch im Leelauf - idle -)<br />
= 0 # default<br />
<br />
<br />
==== reconnecttimeout ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7244:08/07/2012</span><br />
<br />
Zeitspanne in Sekunden für eine Wiederverbindung mit einem Remote-Reader, wenn Antworten ausbleiben<br />
<br />
Beispiel<br />
reconnecttimeout = 20 # Nach 20 Sekunden ohne Antworten wird wiederverbunden<br />
= # [blank] default 30 Sekunden<br />
<br />
<br />
==== connectoninit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = Ermöglicht die Herstellung einer Newcamd-Verbindung, solange noch kein Request vorliegt<br />
0 = default<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = ermöglicht es einem cs378x TCP socket, ständig verbunden zu sein<br />
0 = Immer eingeschaltet bei einem cacheex reader type (default)<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Definiert diesen Reader als Fallback. Standard- und Fallback-Reader müssen in der selben Gruppe sein. Siehe '''group'''!<br />
fallback = 1 # Fallbackreader<br />
= 0 # Kein Fallbackreader (default)<br />
<br />
'''Info:'''<br />
<br />
Ist Loadbalancing aktiviert, und zusätzlich der Parameter "cwcycle_allowbadfromffb = 1", wird dieser Reader ein fixed Fallback für CacheEx.<br />
Somit wird er verwendet wenn ein Bad Cycle erkannt wird, damit freetzer entsprechend verhindert werden können.<br />
--> siehe [[OSCam/de/Config/oscam.conf#cwcycle_allowbadfromffb|cwcycle_allowbadfromffb]]<br />
<br />
<br />
==== fallback_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
Benutze den Reader nur als fallback für vorher definierte CAIDs, two-digit wildcards sind möglich. Dieser Parameter überschreibt den Parameter fallback!<br />
Default = none<br />
<br />
Beispiel:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional}}<br />
Definition des EMM-Caches für den Reader. Derzeit nur für lokale Reader. Betrifft die AU-Funktion. Damit kann entschieden werden, ob Update-Kommandos (EMM) vom Provider immer oder nur unter bestimmten Voraussetzungen geschrieben werden.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
Ohne diesen Parameter werden keine EMM im Log angezeigt!<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # cache/stats aus (default)<br />
* <usecache> 1 = # cache/stats ein und schreibe sie in eine Datei wenn oscam beendet wird<br />
* <usecache> 2 = # cache/stats ein, aber schreibe sie beim beenden von oscam <ins>nicht</ins> in eine Datei<br />
<br />
* <rewrite> n = # Wie oft ein und das selbe Update-Kommando (EMM) geschrieben wird. ''Gilt nur bei <usecache> = 1 oder 2''<br />
<br />
* <logging> 0 = # Einträge im Logfile ausgeschaltet (default)<br />
* <logging> 1 = # Nur fehlerhafte EMM werden geloggt<br />
* <logging> 2 = # die geschriebenen (written) EMM werden geloggt<br />
* <logging> 4 = # die zurückgewiesenen (skipped) EMM werden geloggt<br />
* <logging> 8 = # die blockierten (blocked) EMM werden geloggt<br />
* <logging> 16 = # disabled AU werden geloggt<br />
Aufsummieren der Werte ist möglich, 31 wird also alle loggen.<br />
<br />
* <stb-emm> 0 = # EMM für die STB werden ignoriert (default)<br />
* <stb-emm> 1 = # EMM für die STB werden zum Reader gesendet (nur sehr spezifisch nötig)<br />
<br />
Beispiele:<br />
emmcache = 1,3,10,0 # Cache ein, 3 x schreiben, die geschriebenen (2) und die geblockten (8) = 10 loggen, keine stb-emm senden<br />
emmcache = 1,2,6,1 # Cache ein, 2 x schreiben, die geschriebenen (2) und die zurückgewiesenen (4) = 6 loggen, stb-emm senden<br />
<br />
'''stb-emm''': ist nur für einige Viaccess-User sinnvoll (siehe Commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) und '''bestimmt nicht für User mit einer echten Karte im Reader'''.<br />
<br />
Dazu [http://www.streamboard.tv/wbb2/thread.php?postid=538345#post538345 noch ein Zitat vom User ''pr2'']: "In Viaccess sahen wir einige EMM-G, die für die Set-Top-Box(STB) waren und nicht für die Karte, deshalb nennen wir das STB-EMM. Diese EMMs setzen den Overencryption-Key (AES) in der STB für die Verschlüsselung der Kommunikation zwischen STB und Karte."<br />
<br />
<br />
==== emmreassembly ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8591:04/01/2013 Parameter jetzt in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = schaltet Neuaufbau von EMM ein, default<br />
0 = schaltet Neuaufbau von EMM aus<br />
<br />
Sollte bei '''Viaccess und Cryptoworks Readern''' gesetzt werden, wenn der Client, der für das Senden von EMMs benutzt wird, die EMMs neu aufbaut anstelle sie an OScam zur Bearbeitung zu senden.<br />
<br />
<br />
==== cacheex ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
cacheex = 1 # enable cache exchange pull mode<br />
cacheex = 2 # enable cache exchange push mode<br />
cacheex = 3 # enable cache exchange revers push mode<br />
cacheex = 0 # aus (default)<br />
<br />
Identische modes müssen bei local OSCam server und remote OSCam user account gesetzt werden!<br />
Nur für camd3.5x und CCcam Protokolle!<br />
<br />
Siehe auch entsprechenden Parameter in oscam.user!<br />
<br />
[[Datei:MessageS.png|text-bottom]]'''Ein ausführliches How-To findet man [[Streamboard-Post:406230|hier]]'''<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam A erhält eine ECM Anfrage, reader1 sendet diese Anfrage an OSCam B,<br />
<br />
OSCam B prüft seinen cache:<br />
* im cache wird nichts gefunden: OSCam B sendet: NOK<br />
* im cache wird etwas gefunden; OSCam B sendet: OK+CW<br />
* im cache wird nichts gefunden aber es wird eine anstehende Anfrage festgestellt: ''cacheexwaittime'' in oscam.conf [global] wird abgewartet und dann erneut geprüft. OSCam B fragt nicht mehr nach neuen EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 2<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 2<br />
<br />
Wenn OSCam B ein CW erhält, wird es auf OSCam A geschoben. Der Reader hat normale Funktionen und kann ECMs anfragen.<br />
* Problem: OSCAM kann nur dann CW's auf OSCam A schieben, wenn OSCam A verbunden ist<br />
* Problem oder feature?: OSCam A kann ECMs von OSCam B anfragen<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 ist gesetzt auf cacheex = 3<br />
<br />
Wenn OSCam A ein CW erhält, wird dies auf OSCam B geschoben. OSCam A fragt nicht mehr nach neuen ECMs<br />
<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = Anzahl der hops<br />
= default = 10<br />
<br />
Festlegen der maximalen hops für cache exchange. Zum pushen des lokalen caches 1 eintragen. Der Eintrag cacheex_maxhop = 0 bewirkt nur, dass der default-Wert von 10 genommen wird.<br />
<br />
<br />
==== logport ====<br />
{{Optional}}<br />
Logport für einen '''Camd 3.x'''-Reader. UDP muss aktiviert sein. Funktioniert nur, wenn in Camd 3.x kein Cascading stattfindet!<br />
logport = Port-Nummer<br />
= # kein Logport (default)<br />
<br />
<br />
==== ecmwhitelist ====<br />
{{Optional}}<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
definiert die gültige ECM-Länge in '''hex''' und provid für physische Reader<br />
<br />
Beispiel:<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = keine (default) und provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Im normalen Betrieb ist dieser Parameter nicht erforderlich!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|Liste mit ECM-Längen]]'''<br />
<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
Gültige ECM-Header mit CAID und provid '''in hex''' einsetzen.<br />
<br />
default: none, provid = 000000<br />
<br />
Ein Thread dazu ist [[Streamboard-Thread:34748|hier]] zu finden.<br />
<br />
Und hier findet man eine ständig gepflegte [[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] .<br />
<br />
<br />
==== ratelimitecm ====<br />
{{Optional}}<br />
Anzahl der unterschiedlichen SIDs die in ECMs innerhalb eines Intervalls erlaubt sind<br />
ratelimitecm = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = Anzahl<br />
<br />
Anzahl der ECM's mit "not found" Anwort bis der Reader neu gestartet wird, 0 = kein Limit (default)<br />
<br />
<br />
==== resetcycle ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5821:08/12/2011</span><br />
<br />
Anzahl von ECM's bis ein Reset des Cardreaders durchgeführt wird<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
resetcycle = 5 # Reset nach 5 ECM's<br />
= 0 # ausgeschaltet [default]<br />
<br />
<br />
==== ratelimittime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
Intervall für ein ratelimit<br />
ratelimittime = Millisekunden<br />
= 0 # (default)<br />
<br />
<br />
==== ecmunique ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = ermöglicht eine Überprüfung des matching ECM hash im ratelimit slot<br />
0 = default<br />
<br />
<br />
==== srvidholdtime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
srvidholdtime = Millisekunden<br />
<br />
Zeitraum, in dem die Service-ID im ratelimit slot gehalten werden soll. Während dieses Zeitraums ist der Zeit-Check für ecmunique ausgeschaltet. Default = 0<br />
<br />
<br />
==== cooldowndelay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5946:09/09/2011</span><br />
<br />
cooldowndelay <br />
<br />
Erläuterung:<br />
delay = Verzögerungszeit in Sekunden, in der dem Reader erlaubt ist, mehr ECM-Anfragen zu stellen,<br />
als im Parameter "ratelimitecm" festgelegt ist<br />
default: [blank] keine<br />
duration = Zeitdauer in Sekunden, die der Reader für einen cooldown benötigt<br />
default: [blank] keine<br />
<br />
'''Voraussetzung ist, dass die Parameter "ratelimitecm" und "ratelimittime" ausgefüllt sind!'''<br />
<br />
<br />
==== block and save ====<br />
Zur Thematik block, save, select und write EMM gibt es hier [[http://www.streamboard.tv/wiki/EMM]] ein besonderes Wiki!<br />
<br />
<br />
===== blocknano =====<br />
{{Optional}}<br />
Liste zu blockender EMM-Nanos (in hex) oder aller EMM-Nanos. Gilt nur für physikalische Reader!<br />
<br />
Beispiel<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
<br />
===== blockemm-u =====<br />
{{Optional}}<br />
''unique address-EMMs, entspricht D3 bei Sk*''<br />
blockemm-u = 1 # Blocke EMMs, die an die Karte direkt adressiert sind)<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-s =====<br />
{{Optional}}<br />
''shared address-EMMs, entspricht D2 bei Sk*''<br />
blockemm-s = 1 # Blocke EMMs, die an bestimmte Gruppen von Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-g =====<br />
{{Optional}}<br />
''global address-EMMs, entspricht D0 bei Sk*''<br />
blockemm-g = 1 # Blocke EMMs, die an alle Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-unknown =====<br />
{{Optional}}<br />
Blockiert alle unbekannten Arten von EMM<br />
blockemm-unknown = 1 # Blocke alle unbekannten Arten von EMMs<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-bylen =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8615:04/12/2013</span><br />
<br />
Blockiere alle Arten von EMMs anhand der Länge. Es werden maximal 10 Werte zugelassen.<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
= # [blank] keine Blockierung (default)<br />
<br />
Beispiel:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br />
===== via_emm_global =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9843:09/05/2014</span><br />
<br />
via_emm_global = 0|1<br />
<br />
ermöglicht die Filterung von globalen emm für '''viacces'''<br />
<br />
'''ausschließlich für camd35 (cs357x) Protokoll!'''<br />
<br />
0 = default<br />
<br />
<br />
===== saveemm-u =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unique-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-u = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-s =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere shared-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-s = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-g =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere global-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-g = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-unknown =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unknown-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-unknown = 1<br />
= 0 # (default)<br />
<br />
===== needsglobalfirst =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn11494:02/03/2019</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Nur für Cryptoworks Karten mit den CAIDs 0D96 & 0D98'''<br />
<br />
Ist der Parameter gesetzt, wird nur noch ein global EMM pro shared EMM geschrieben. Der Rest der global EMMs wird geblockt. Dazu darf das Schreiben der global und shared EMMs nicht generell geblockt sein. Also Vorrausetzung ist: blockemm-s = 0 und blockemm-g = 0.<br />
<br />
needsglobalfirst = 0|1 - 0 default<br />
<br />
Beispiel<br />
needsglobalfirst = 1<br />
blockemm-g = 0<br />
blockemm-s = 0<br />
<br />
===== savenano =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn5947:09/09/2011</span><br />
<br />
Liste von EMM-Nanos, die gespeichert werden sollen (hex) oder alle EMM-Nanos. Der Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
<br />
===== readnano =====<br />
{{Optional}}<br />
Schreibt ein File (üblicherweise eine Copy des von savenano gesicherten files) in die SC. Wenn kein Pfad angegeben ist, wird danach im Konfigurations-Verzeichnis gesucht. <br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
readnano = /var/oscam/write.emm # Beispiel Pfad/Dateiname<br />
= write.emm # Nur Dateiname<br />
= # [blank] es wird kein File geschrieben (default)<br />
<br />
<br />
==== use-ssl ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
use_ssl = 1 # benutze SSL für ghttp protocol<br />
= 0 # default<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # weise falsche CW's zurück, sende "not found" an Stelle falscher CWs<br />
= 0 # default<br />
<br />
Die Option hat nur eine Wirkung auf dem oscam Server (oscam.server, [reader]), der die Karte direkt anspricht, also nicht auf einem Client. Betroffene Karten: CSAT (0100:003311)<br />
<br />
<br />
==== disablecrccws ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # unterdrücke den cw-checksum-test<br />
= 0 # cw-checksum-test eingeschaltet (default)<br />
<br />
Hier mal eine Erklärung von Bit aus dem SB:<br />
<br />
Das ist für den dänischen Provider BoxerTV.<br />
Die haben Gegenmassnahmen eingeleitet und die VIA Karten verdauen keine Checksum-korrigierten CWs mehr. Damit kann man die CW checksummenkorrektur bei diesen readern ausschalten.<br />
Dann geht's wieder bei BoxerTV-readern.<br />
(dropbadcws muss dann auf aus sein).<br />
...<br />
PS: die checksummenkorrektur ausschalten ist böse und entgegen des DVB-Standards! Benutzt diesen Parameter nur wenn Ihr ihn wirklich benötigt!<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID<br />
<br />
Exemple :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
<br />
==== lb_weight ====<br />
{{Optional}}<br />
Je höher dieser Wert, desto größer ist die Wahrscheinlichkeit, dass dieser Reader ausgesucht wird. Es ist ein Indikator für die durchschnittliche Antwortzeit innerhalb des Loadbalancing<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
<br />
Abwärts die durchschnittliche Antwortzeit des Readers. Von rechts nach links der Wert lb_weight. <br />
Im Mittelfeld könnt Ihr ablesen, wie die durchschnittliche Antwortzeit durch den lb_weight wert "korrigiert" wird.<br />
<br />
<br />
'''Beispiel:'''<br />
<br />
Du hast 2 Reader die beide eine durchschnittliche Antwortzeit von 400ms haben. Nun möchtest Du aber einen Reader bevorzugen indem Du dem Loadbalancer 300ms vorgaukeln willst.<br />
<br />
Also suchst Du die Zeile die mit 400 beginnt und wanderst auf dieser Zeile nach rechts bis du bei ~300 (in der tabelle findest du nur 30cool bist. Dann liest Du oben den Wert für lb_value ab den der Reader bekommt (130). Diesen trägst Du bei dem Reader ein und schon wird der Reader bevorzugt<br />
<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional}}<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
Zuordnung von Services an den Reader, welche durch den Loadbalancer nie geblockt werden sollen, default=none<br /><br />
<br />
<br />
==== lb_force_fallback ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = setzt den Reader ständig in fallback-modus für das load balancing ohne Berücksichtigung der reader statistics,<br /><br />
0 = default<br />
<br />
<br />
==== ccc ====<br />
===== cccversion =====<br />
{{Depends}}<br />
'''Nur für CCcam'''<br />
<br />
Definiert die Version von CCcam, die verwendet werden soll.<br />
<nowiki><mainversion>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
cccversion = 1.2.34<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
===== cccmaxhops =====<br />
{{Depends}}<br />
Legt das Maximum an Distance-Hops für die Karte fest<br />
0 = Nur lokale Karte<br />
1 = Lokale Karte + 1 Hop<br />
2 = Lokale Karte + 2 Hops<br />
und so weiter<br />
Default-Wert = 10<br />
<br />
<br />
===== ccchop =====<br />
{{Depends}}<br />
ccchop = hop<br />
<br />
Setzt den hop für '''nicht'''-cccam-reader<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Definiert den reshare-hop für CCcam-Reader<br />
<br />
cccreshare = hop<br />
= -1 # kein reshare<br />
= 0 # reshare für direct peer <br />
= 1 # reshare für direct peer und den nächsten Level<br />
= x # reshare für direct peer und die nächsten x (Anzahl) Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
===== cccwantemu =====<br />
{{Depends}}<br />
Anfrage, auch einen emu vom CCcam-Server zu erhalten.<br />
cccwantemu = 1 # ja<br />
= 0 # nein default<br />
<br />
<br />
===== ccckeepalive =====<br />
{{Depends}}<br />
Sendet eine "keepalive-message", um eine Verbindung zum remote CCCam-Server zu erhalten.<br />
ccckeepalive = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
===== cccreconnect =====<br />
{{Optional}}<br />
cccreconnect = timeout (ms)<br />
<br />
default = 12000 (ms)<br />
<br />
Wiederverbindung nach ECM-Request-Timeout in Millisekunden.<br />
Gilt nur für O-cccam reader, für cccam-ext Protokoll wird diese Zeit ignoriert.<br />
<br />
<br />
===== cccmindown =====<br />
{{Depends}}<br />
cccmindown = # Zahl<br />
= 0 default<br />
<br />
Filtert alle Reader mit hops, die kleiner sind als die eingesetzte Zahl<br />
<br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBOX läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
===== device =====<br />
{{Mandatory}}<br />
device = Komma-separierte Liste mit den Werten<br />
<br />
peer's IP oder Hostname<br />
peer's port<br />
<br />
Beispiel:<br />
device = 192.168.1.101,3820<br />
<br />
<br />
===== password =====<br />
{{Mandatory}}<br />
password = 4 hex bytes, 8 chars<br />
<br />
Peer Passwort<br />
<br />
Beispiel:<br />
password = A123BCDE<br />
<br />
===== gbox_reshare =====<br />
{{Optional}}<br />
Reshare-Level für lokale Karte(n), default = 2<br />
<br />
===== gbox_max_distance =====<br />
{{Optional}}<br />
gbox_max_distance = maximale Distanz zum Empfang von peer-cards, default = 2<br />
<br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional}}<br />
gbox_max_ecm_send = sende ecm zu maximal n peer cards, default = 3<br />
<br />
<br />
===== user =====<br />
{{Mandatory}}<br />
Benutzername (client) der oscam Gbox<br />
<br />
Beispiel<br />
user = gbox_client<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
'''Der user muss auch in der oscam.user als [account] eingetragen werden.'''<br />
<br />
'''Man sollte unbedingt für jeden gbox [reader] einen anderen user [account] benutzen.'''<br />
'''Nur dann sind die Peers im Log usw unterscheidbar.'''<br />
<br />
'''Unter [reader] und [account] sollten geeignete Filter gesetzt werden (services=, caid=, ident=), um Instabilitäten der GBOX durch<br />
'''Überfluten mit Karten zu vermeiden.'''<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.server&diff=13504
OSCam/de/Config/oscam.server
2019-02-04T18:26:51Z
<p>Felixka: /* needsglobalfirst */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.server''' ==<br />
Diese Konfigurationsdatei enthält Reader-Parameter für OSCam. Die Abschnitte dürfen sich wiederholen (mehr als ein Reader möglich). Es muss aber in jedem Fall mindestens ein reader konfiguriert sein!<br />
<br />
Beispiel-Konfiguration für die wichtigsten Reader sind hier zu finden [[OSCam/de/examples/Reader|Beispiel-Konfigurationen]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
<br />
=== '''Reader''' ===<br />
'''Grundsatz:''' Es können mehrere [reader]-Abschnitte erstellt werden. Jeder vollständige Abschnitt wird dann als Reader verwendet. Er '''muss''' immer mit [reader] beginnen. Im Parameter "label" kann dann die Art des Readers beschrieben werden:<br />
<br />
Beispiele: easymouse, phönix, smargo, sc8in1 usw.<br />
<br />
<br />
==== label ====<br />
{{Mandatory}}<br />
<br />
Legt den Namen für diesen Reader fest.<br />
<br />
'''Der Name des Labels darf nicht identisch zu einem Usernamen (oscam.users) sein!'''<br />
<br />
<br />
Beispiel<br />
label = easymouse2<br />
<br />
<br />
==== enable ====<br />
{{Optional}}<br />
Reader aktivieren/deaktivieren<br />
enable = 0 # Reader aus<br />
= 1 # Reader ein (default)<br />
<br />
==== description ====<br />
{{Optional}}<br />
description = Text <br />
<br />
Beliebiger Text zur Beschreibung des readers; default: [blank] keine Beschreibung<br />
<br />
'''Nicht zu verwechseln mit ''label''!''' Hier kann zusätzlich eine Information hinterlegt werden, z.B. Reader nur für CI+ usw.<br />
<br />
<br />
==== protocol ====<br />
{{Mandatory}}<br />
Kommunikationsprotokoll für den Reader.<br />
protocol = mouse # (Lokaler Cardreader)<br />
= internal # (Alle Cardreader mit einem "Device=/dev/sciX", sowie interne Coolstream-Reader)<br />
= camd35|cs357x # (Cascading - camd 3.5-kompatibler Remote-Server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x # (camd 3.5-kompatibler Remote-Server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1 # (SC8in1 und MCR 4/8 Cardreader)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''smartreader:''' Es können Probleme auftreten, wenn der Cardreader im smartreader-Modus in einem USB-Hub betrieben wird.<br />
In diesem Fall den Cardreader direkt am PC/Receiver einstecken und erneut testen.<br />
Sollte es dann funktionieren, ggf. einen anderen USB-Hub besorgen.<br />
<br />
<br />
==== device ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8911:09/10/2013</span><br />
<br />
Legt den local oder remote reader Abschnitt [reader] fest:<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw <br />
<br />
Bestimmt den reader type:<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3 <br />
bus:device: Bus- und Device-Namen von Smartreader+ oder Infinity USB (mit lsusb 'Bus' und 'Device' holen)<br />
serialnum: Serial-Nummer des Smartreader+ oder Infinity USB<br />
device: Name der Device<br />
device:slot: device name und slot-nummer '''für sc8in1''' (1-8)<br />
'''Es wird nur ein SC8in1 unterstützt!'''<br />
ip|hostname: IP-Adresse oder Hostname<br />
port: TCP/IP port <br />
lport: Remapping für den Local-Port (TCP/IP)<br />
PCSC: Nummer des PCSC-Readers (mit 0 starten!)<br />
Alternativ kann über den Namen des Readers (bzw. einen Teil davon) selektiert werden, z.B. "-1:SCR 3310" (Namen der erkannten Reader werden bei "oscam -d 32" ausgegeben)<br />
0|1: '''Nur für die Coolstream HD-1''' (Reader 0 oder 1 auswählen)<br />
constantcw: Dateiname für das Constant-CW-File<br />
<br />
Format des CW-Files: <br />
'''Standard-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
Beispiele für device--parameter:<br />
device = /dev/ttyS0 # Reader an COM1 (bei Linux i386 und Windows)<br />
device = /dev/tts/1 # Reader an COM2 (Linux dbox2 mit multicam)<br />
device = /dev/ttyUSB0 # Reader an USB (Linux i386)<br />
device = Serial:Reader 1 # z.B. Smargo im smartreader-Modus, wobei die Kennung "Reader 1" der Smargo-Konfiguration zu entnehmen ist!<br />
device = /var/keys/constant.cw # Einbindung eines constantcw<br />
device = /dev/ttyUSB0:1 # Slot 1 eines SC8in1 oder MCR 4/8 (Linux i386)<br />
<br />
'''Hinweis:''' Der Zähler für die Device liegt immer um 1 hinter der Nummer des COM-Ports! Also ttyS0 = COM1, tts/1 = COM2. Bei Benutzung neuerer PC sind kaum noch serielle Anschlüsse vorhanden, sodass in diesen Fällen USB 2.0 benutzt werden muss. Hier am besten im Gerätemanager des PC nachschauen, welcher COM-Port dem Reader zugewiesen wurde und in die Device den Port -1 eintragen!<br />
<br />
==== detect ====<br />
{{Depends}}<br />
Der Card Status (Karte im Reader eingeführt oder entfernt) wird detektiert mit Hilfe einer handshake input Leitung der seriellen Schnittstelle (UART/SCI) - cd, cts, dsr oder ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" bedeutet: Keine Leitung zum detektieren des Card Status vorhanden. Karte wird immer als im Kartenleser gesteckt erkannt.<br />
<br />
* Falls das detect signal invertiert ist: prefix "!" (eg "detect = !cts")<br />
<br />
<br />
Falls Parameter '''use_gpio = 1''' gesetzt ist:<br />
<br />
detect = gpio1...gpio7 - Card Status wird über einen gpio erfasst. GPIO means "general purpose input output". <br />
<br />
<br />
Beispiel:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
'''protocol = mouse'''<br />
'''device = /dev/ttyUSB0''' (easymouse 2)<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends}}<br />
Benutze gpio als card detect/ reset. Siehe auch '''detect ='''<br />
use_gpio = 0|1 #default = 0<br />
<br />
==== cardmhz ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
'''Standard'''-Frequenz der Karte in Schritten von 10 KHz. Für Irdeto-Karten z.B. "cardmhz = 600" (6 Mhz)<br />
<br />
Beispiel:<br />
cardmhz = 600 # Irdetokarte<br />
= # [blank] Default-Wert 357<br />
<br />
'''Interne-Dreambox-Leser'''<br />
<br />
Wenn cardmhz >2000 eingetragen wird aktiviert OScam den PLL-Clock. Interne-Dreambox-Leser (Dream Multimedia GmbH und Clones) können damit optimal getaktet werden.<br />
<br />
Der verwendete cardmhz-wert entspricht dem höchsten PLL-Takt. OSCam wird dann den optimalen PLL-Teiler berechnen damit die Frequenz möglichst nahe an den Wert kommt welcher bei "mhz" definiert wurde.<br />
<br />
Benutze die folgenden Einstellungen:<br />
<br />
Modelle mit PPC-CPU (DM500/DM600/DM7000/DM7020): "cardmhz = 3150"<br />
<br />
Modelle mit MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.): "cardmhz = 2700"<br />
<br />
Die DM7025 ist speziell: "cardmhz = 8300"<br />
<br />
'''Wird nur der Parameter cardmhz gesetzt (ohne mhz = xxx) wird die Karte automatisch anhand des ATR getaktet!'''<br />
<br />
Beispiel:<br />
Du hast eine Dream 800 HD PVR, das ist eine MIPS, daher muss du "cardmhz = 2700" setzen. Nehmen wir an du hast eine Nagra-Karte welche auf 5 MHz laufen soll.<br />
Wenn du die Karte richtig takten willst verwende "cardmhz = 2700" und "mhz = 500", Oscam taktet die Karte dann mit der nächst möglichen Frequenz (4.50 Mhz).<br />
Möchtest du sie übertakten, dann verwende "cardmhz = 2700" und z.B. "mhz = 900".<br />
Deine Karte läuft nun auf 9 Mhz. Aber vorsichtig, eine übertaktete Karte kann heiss und instabil werden! ([[OSCam/de/examples/Overclocking|Overclocking]] beachten!)<br />
<br />
Viele Interne-Leser von anderen Herstellern als Dream ignorieren die eingestellten Werte! Aber du solltest "cardmhz" und mhz" trotzdem setzen da es zum berechnen der richtigen "timings" verwendet wird. Wenn du cardmhz/mhz richtig setzt ist das "timing" besser für die aktuelle (automatisch gesetzte) Frequenz des Internen-Lesers. Als Ergebnis bekommst du bessere ECM-Zeiten oder mehr Stabilität.<br />
<br />
Erwarte keine Wunder, nur ein übertakten der Karte bringt bessere ECM-Zeiten. Schlechtes "timing" kann jedoch zu verzögerungen führen oder die Karte instabil machen.<br />
<br />
'''Nützliche Links:'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|Liste verschiedener Karten und ihren Frequenzen]]'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
==== mhz ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
mhz = Frequenz in KHz<br />
<br />
Sofern dies technisch möglich ist kann abweichend von '''cardmhz''' die Frequenz des Kartenlesers anders (in der Regel höher) als die Standard-Frequenz der Karte eingestellt werden (in 10 KHz-Schritten). Man spricht dann von [[OSCam/de/examples/Overclocking|Overclocking]]. So kann z.B. eine S02-Karte (Standard 6 MHz) mit 10 MHz übertaktet werden.<br />
<br />
Beispiel Externe-Reader:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
Beispiel DM800:<br />
cardmhz = 2700 # (27MHz PLL)<br />
mhz = 900 # (Wert wird berechnet -> 27Mhz : 3 = 9 Mhz)<br />
<br />
Hier eine ausführlichere Beschreibung von '''stefansat''' aus der Distri-Doku:<br />
<br />
Wenn die Frequenz in '''mhz''' größer ist als in '''cardmhz''', dann befindest Du dich im [[OSCam/de/examples/Overclocking|Overclocking]] Modus.<br />
<br />
Smargo-Reader und interne Reader der Dreamboxen werden durch den '''ATR''' automatisch eingestellt, wenn '''autospeed = 1''' (siehe nächsten Parameter) gesetzt ist.<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
<br />
==== autospeed ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
1 = setzt den mhz-Wert anhand des ATR (default)<br />
0 = disabled<br />
<br />
<br />
==== deprecated ====<br />
{{Optional}}<br />
Zuerst wird die Smartcard im Normal-Modus initialisiert. Schlägt dies fehl, wird die Initialisierung automatisch auf den veralteten Modus umgeschaltet, so dass die Smartcard-Geschwindigkeit nicht verändert wird und die Kommunikation auf normaler ATR Geschwindigkeit von 9600 Baud bleibt.<br />
deprecated = 1 # ausschließlich veralteter Modus<br />
= 0 # default<br />
<br />
<br />
==== mode ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Nur für AZBox'''<br />
<br />
mode = 1 # AzBox-Reader<br />
= 0 # default<br />
Setzt den Init-Mode für die Karte im internen AZBox-reader<br />
<br />
<br />
==== device_out_endpoint ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8013:12/29/2012</span><br />
<br />
Setzt die Addresse des Endpunkts für FTDI-Chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
<br />
==== smargopatch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet den workaround für smargoreader+ und reader ein, bis der native mode funktioniert<br />
smargopatch = 1<br />
= 0 (default)<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet fix für SC8in1/MCR DTR/RTS kernel bug ein<br />
sc8in1_dtrrts_patch = 1<br />
= 0 # (default)<br />
<br />
<br />
==== cool_timeout_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6286:01/23/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Setzt beim init der SC einen timeout in Millisekunden fest (im internen Reader).<br />
cool_timeout_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Hier kann ein timeout der SC für read/transmit nach dem init in Millisekunden festgelegt werden (nur für interne Reader).<br />
cool_timeout_after_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9568:03/16/2014</span><br />
<br />
Fügt einen Controll-Check für Pin Payload von NDS Videoguard Karten hinzu (4 Hex-Bytes). '''Gültig nur für physikalische Reader'''<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
<br />
==== ins7e ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5959:09/22/2011</span><br />
<br />
Füge 26 hex-bytes payload für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e = payload<br />
= # [blank] default (none)<br />
<br />
<br />
==== ins7e11 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6064:12/06/2011</span><br />
<br />
Füge TA1 für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e11 = TA1 Byte<br />
= # [blank] default (none)<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
<br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9884:09/30/2014</span><br />
{{Optional}}<br />
schaltet den 0x07-EMM-Fix für NDS Videoguard 2 Karten ein. '''Gültig nur für physikalische Reader'''<br />
fix07 = 1 # 0x07-EMM-Fix eingeschaltet (default)<br />
= 0 # ausgeschaltet <br />
<br />
<br />
==== force_irdeto ====<br />
{{Optional}}<br />
Forciert den Irdeto-Modus, auch wenn ein RSA-Key für Irdeto getunnelte Nagravisions-Karte vorliegt.<br />
force_irdeto = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
==== nagra_read ====<br />
{{Optional}}<br />
Lese Nagravision-Records. '''Nur für NCMED-Karten'''<br />
nagra_read = 0 # ausgeschaltet (default)<br />
= 1 # lese alle Records mit abgelaufenen Rechten<br />
= 2 # lese nur Records mit gültigen Rechten<br />
<br />
<br />
==== rsakey ====<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7046:06/12/12</span><br />
{{Optional}}<br />
<br />
RSA key für Nagravision/Tiger SCs / CAM key data für Irdeto SCs, Conax SCs<br />
rsakey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== fix9993 ====<br />
{{Optional}}<br />
fix9993 = 0|1<br />
<br />
Fixed den error 9993 bei CAID 0919 SC's<br />
<br />
fix9993 = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== readtiers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
Methode wie die Tiers von NDS Videoguard Smartcards ausgelesen werden.<br />
<br />
readtiers = 0 # ausgeschaltet (default)<br />
readtiers = 1 # ins70 (neue) Methode <br />
readtiers = 2 # ins76 (alte) Methode <br />
<br />
==== boxkey ====<br />
{{Optional}}<br />
Boxkey für Nagravision SCs / CAM key für Irdeto SCs<br />
boxkey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== pincode ====<br />
{{Optional}}<br />
Pincode für '''Conax-, Cryptoworks- und Viaccess-''' Karten.<br />
pincode = code<br />
= # [blank] default<br />
<br />
<br />
==== boxid ====<br />
{{Optional}}<br />
ID der '''NDS-Reciever-Box'''<br />
boxid = NDS box ID<br />
= # [blank] default<br />
<br />
<br />
==== ndsversion ====<br />
{{Optional}}<br />
Version von '''NDS Videoguard''' einsetzen<br />
ndsversion = 0 # autodetection (default)<br />
ndsversion = 1 # NDS Videoguard 1<br />
ndsversion = 12 # NDS Videoguard 1+<br />
ndsversion = 2 # NDS Videoguard 2<br />
<br />
<br />
==== aeskeys ====<br />
{{Optional}}<br />
Multiple AES-Keys für '''Viacces-Karten'''<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
Spezial AES Keys:<br />
00 = schicke keine CW zurück, es ist kein AES-Key spezifiziert<br />
FF = schicke CW zurück, die vom S empfangen wurden, es ist kein AES-Key spezifiziert<br />
<br />
Beispiel<br />
aeskeys = 0100@012345:000102030405060708090a0b0c0d0e0f;0200@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6624;04/23/2012</span><br />
{{Optional}}<br />
Anzahl der Subscritions-Klassen für '''Viacces'''<br />
schowcls = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== key ====<br />
{{Depends}}<br />
Key für Newcamd remote reader encription<br />
key = DES key<br />
<br />
<br />
==== user ====<br />
{{Optional}}<br />
Username für Remote-Reader.<br />
<br />
Beispiel<br />
user = # xyxyx<br />
<br />
<br />
==== password ====<br />
{{Optional}}<br />
Passwort für Remote-Reader.<br />
<br />
Beispiel<br />
password = # xyxyx<br />
<br />
<br />
==== mg-encrypted ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO</span><br />
<br />
mgcamd encrypted line für '''GBox!'''<br />
<br />
Format:<br />
<br />
mg-encrypted = D: { <IP|hostname> { <local port> <remote port> { <password> { <level> <level> }}}}[,<local MAC address>] # default MAC address=eth0<br />
<br />
default:<br />
mg-encrypted = # [blank] (none)<br />
<br />
<br />
==== services ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' <br />
<br />
Wenn Loadbalancing aktiviert ist, sind folgende Besonderheiten zu berücksichtigen:<br />
* Services sind für den Loadbalancer eine '''Whitelist'''. Das bedeutet, dass alles, was hier eingetragen wird, vom Loadbalancing als Service behandelt wird, den die Karte '''kann'''! Wenn dann z.B. ein "not found" kommt, wird das ignoriert und die Karte wird weiter angefragt, mit dem damit verbundenen traffic!<br />
* Daraus ergibt sich, dass der Eintrag von Services bei '''lokalen''' Karten und Proxies, '''die man genau kennt''', kein Problem darstellt.<br />
* Anders verhält es sich bei Proxies (z.B. CCcam), deren Services '''man nicht kennt'''. Hier ist davon abzuraten, Services einzutragen. In einem solchen Fall sollten vielmehr die Services bestimmt werden, die '''nicht zu berücksichtigen''' sind (Eintrag mit (!)), oder besser eine Filterung über den Parameter '''caid''' erfolgen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Die Anzahl der services, die je reader berücksichtigt werden, ist auf 64 begrenzt, also 64 mal [[service-name][CAID][provid][srvid]]! <br />
<br />
Welche Services kann der Reader. Hierzu muss eine oscam.services vorhanden sein. Die Logik ist hier folgendermaßen (in der angegebenen Reihenfolge):<br />
* Wenn das Feld leer ist (oder ungültig) wird die Anfrage erlaubt.<br />
* Wenn ein negativer Service (also solche mit "!") zutreffend ist, so wird die Anfrage abgewiesen.<br />
* Wenn ein positiver Service zutreffend ist oder es gar keinen positiven Service gibt, so wird die Anfrage erlaubt.<br />
* Wenn keiner der vorigen Punkte zutrifft, so wird die Anfrage abgewiesen.<br />
Dies bedeutet, dass negative Services nur in Einzelfällen nötig sind. Nämlich genau dann, wenn man positive Services hat, davon aber wieder einige ausnehmen will. Dies wird nicht empfohlen, da es hier schnell zu Fehlkonfigurationen kommt. Stattdessen sollte ein zusätzlicher Service angelegt werden, der alle entsprechenden Sender enthält.<br />
services = [!]services[,[!]<services>]...<br />
= [blank] ist default<br />
<br />
Beispiel<br />
services = skywelt,skyweltextra,!skyfilm<br />
# skywelt und skywelt extra sind zugeordnet, skyfilm ist ausgeschlossen<br />
<br />
<br />
==== caid ====<br />
{{Optional}}<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
definiert und mapped CAIDs für Reader<br />
<br />
Beispiele:<br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut für das Beispiel oben)<br />
default: alle CAIDs mit der Maske FFFF<br />
<br />
<br />
==== ident ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Wenn in oscam.conf [global] unter lb_mode loadbalancing aktiviert ist, dann dürfen hier keine Einträge stehen!<br />
<br />
Definiert CAID und Ident '''kartenspezifisch''' für den Reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Beispiel<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] Keine Definition (default)<br />
<br />
<br />
==== class ====<br />
{{Optional}}<br />
Definiert Class '''in hexadecimal''' kartenspezifisch für den Reader:<br />
class = 01,02,!1b,!2b # 01 und 01 ja, 1b und 2b nein<br />
= # [blank] Keine Definition (default)<br />
<br />
<br />
==== chid ====<br />
{{Optional}}<br />
Definiert '''Irdeto'''-ChID für den Reader.<br />
<br />
Beispiel<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
<br />
==== group ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6103:12/21/2011</span><br />
<br />
Jeder Reader muss in einer oder mehrere Gruppen eingetragen sein. Damit lässt sich bestimmen, welcher Client auf welchen Reader Zugriff hat. Gültige Werte 1-64<br />
group = 1....64[,1....64]....<br />
<br />
'''Da ein Eintrag zwingend ist, darf hier kein [blank] als default stehen!'''<br />
<br />
Beispiel<br />
Group = 1 # (eine Gruppe)<br />
Group = 1,4,5 # (mehrere Gruppen)<br />
<br />
<br />
==== audisabled ====<br />
{{Optional}}<br />
Schließt den Reader vom AU (Auto-Updating) aus<br />
audisabled = 1 # ausgeschlossen<br />
= 0 # nicht ausgeschlossen (default)<br />
<br />
<br />
==== auprovid ====<br />
{{Optional}}<br />
Hier kann die Provider-ID festgelegt werden, damit der richtige Reader für das AU zur Verfügung steht<br />
<br />
Beispiel<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
<br />
==== disableserverfilter ====<br />
{{Optional}}<br />
Ignoriert CAID und Ident-Einstellungen des Readers bei fehlerhaften Clients.<br />
disableserverfilter = 1 # ignoriert<br />
= 0 # ignoriert nicht (default)<br />
<br />
<br />
==== inactivitytimeout ====<br />
{{Depends}}<br />
Für alle TCP-basierende remote Reader<br />
<br />
inactivitytimeout = # in Sekunden<br />
= -1 # Verbindet '''newcamd''' basierende Reader bei einem Netzwerkausfall erneut (auch im Leelauf - idle -)<br />
= 0 # default<br />
<br />
<br />
==== reconnecttimeout ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7244:08/07/2012</span><br />
<br />
Zeitspanne in Sekunden für eine Wiederverbindung mit einem Remote-Reader, wenn Antworten ausbleiben<br />
<br />
Beispiel<br />
reconnecttimeout = 20 # Nach 20 Sekunden ohne Antworten wird wiederverbunden<br />
= # [blank] default 30 Sekunden<br />
<br />
<br />
==== connectoninit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = Ermöglicht die Herstellung einer Newcamd-Verbindung, solange noch kein Request vorliegt<br />
0 = default<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = ermöglicht es einem cs378x TCP socket, ständig verbunden zu sein<br />
0 = Immer eingeschaltet bei einem cacheex reader type (default)<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Definiert diesen Reader als Fallback. Standard- und Fallback-Reader müssen in der selben Gruppe sein. Siehe '''group'''!<br />
fallback = 1 # Fallbackreader<br />
= 0 # Kein Fallbackreader (default)<br />
<br />
'''Info:'''<br />
<br />
Ist Loadbalancing aktiviert, und zusätzlich der Parameter "cwcycle_allowbadfromffb = 1", wird dieser Reader ein fixed Fallback für CacheEx.<br />
Somit wird er verwendet wenn ein Bad Cycle erkannt wird, damit freetzer entsprechend verhindert werden können.<br />
--> siehe [[OSCam/de/Config/oscam.conf#cwcycle_allowbadfromffb|cwcycle_allowbadfromffb]]<br />
<br />
<br />
==== fallback_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
Benutze den Reader nur als fallback für vorher definierte CAIDs, two-digit wildcards sind möglich. Dieser Parameter überschreibt den Parameter fallback!<br />
Default = none<br />
<br />
Beispiel:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional}}<br />
Definition des EMM-Caches für den Reader. Derzeit nur für lokale Reader. Betrifft die AU-Funktion. Damit kann entschieden werden, ob Update-Kommandos (EMM) vom Provider immer oder nur unter bestimmten Voraussetzungen geschrieben werden.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
Ohne diesen Parameter werden keine EMM im Log angezeigt!<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # cache/stats aus (default)<br />
* <usecache> 1 = # cache/stats ein und schreibe sie in eine Datei wenn oscam beendet wird<br />
* <usecache> 2 = # cache/stats ein, aber schreibe sie beim beenden von oscam <ins>nicht</ins> in eine Datei<br />
<br />
* <rewrite> n = # Wie oft ein und das selbe Update-Kommando (EMM) geschrieben wird. ''Gilt nur bei <usecache> = 1 oder 2''<br />
<br />
* <logging> 0 = # Einträge im Logfile ausgeschaltet (default)<br />
* <logging> 1 = # Nur fehlerhafte EMM werden geloggt<br />
* <logging> 2 = # die geschriebenen (written) EMM werden geloggt<br />
* <logging> 4 = # die zurückgewiesenen (skipped) EMM werden geloggt<br />
* <logging> 8 = # die blockierten (blocked) EMM werden geloggt<br />
* <logging> 16 = # disabled AU werden geloggt<br />
Aufsummieren der Werte ist möglich, 31 wird also alle loggen.<br />
<br />
* <stb-emm> 0 = # EMM für die STB werden ignoriert (default)<br />
* <stb-emm> 1 = # EMM für die STB werden zum Reader gesendet (nur sehr spezifisch nötig)<br />
<br />
Beispiele:<br />
emmcache = 1,3,10,0 # Cache ein, 3 x schreiben, die geschriebenen (2) und die geblockten (8) = 10 loggen, keine stb-emm senden<br />
emmcache = 1,2,6,1 # Cache ein, 2 x schreiben, die geschriebenen (2) und die zurückgewiesenen (4) = 6 loggen, stb-emm senden<br />
<br />
'''stb-emm''': ist nur für einige Viaccess-User sinnvoll (siehe Commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) und '''bestimmt nicht für User mit einer echten Karte im Reader'''.<br />
<br />
Dazu [http://www.streamboard.tv/wbb2/thread.php?postid=538345#post538345 noch ein Zitat vom User ''pr2'']: "In Viaccess sahen wir einige EMM-G, die für die Set-Top-Box(STB) waren und nicht für die Karte, deshalb nennen wir das STB-EMM. Diese EMMs setzen den Overencryption-Key (AES) in der STB für die Verschlüsselung der Kommunikation zwischen STB und Karte."<br />
<br />
<br />
==== emmreassembly ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8591:04/01/2013 Parameter jetzt in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = schaltet Neuaufbau von EMM ein, default<br />
0 = schaltet Neuaufbau von EMM aus<br />
<br />
Sollte bei '''Viaccess und Cryptoworks Readern''' gesetzt werden, wenn der Client, der für das Senden von EMMs benutzt wird, die EMMs neu aufbaut anstelle sie an OScam zur Bearbeitung zu senden.<br />
<br />
<br />
==== cacheex ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
cacheex = 1 # enable cache exchange pull mode<br />
cacheex = 2 # enable cache exchange push mode<br />
cacheex = 3 # enable cache exchange revers push mode<br />
cacheex = 0 # aus (default)<br />
<br />
Identische modes müssen bei local OSCam server und remote OSCam user account gesetzt werden!<br />
Nur für camd3.5x und CCcam Protokolle!<br />
<br />
Siehe auch entsprechenden Parameter in oscam.user!<br />
<br />
[[Datei:MessageS.png|text-bottom]]'''Ein ausführliches How-To findet man [[Streamboard-Post:406230|hier]]'''<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam A erhält eine ECM Anfrage, reader1 sendet diese Anfrage an OSCam B,<br />
<br />
OSCam B prüft seinen cache:<br />
* im cache wird nichts gefunden: OSCam B sendet: NOK<br />
* im cache wird etwas gefunden; OSCam B sendet: OK+CW<br />
* im cache wird nichts gefunden aber es wird eine anstehende Anfrage festgestellt: ''cacheexwaittime'' in oscam.conf [global] wird abgewartet und dann erneut geprüft. OSCam B fragt nicht mehr nach neuen EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 2<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 2<br />
<br />
Wenn OSCam B ein CW erhält, wird es auf OSCam A geschoben. Der Reader hat normale Funktionen und kann ECMs anfragen.<br />
* Problem: OSCAM kann nur dann CW's auf OSCam A schieben, wenn OSCam A verbunden ist<br />
* Problem oder feature?: OSCam A kann ECMs von OSCam B anfragen<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 ist gesetzt auf cacheex = 3<br />
<br />
Wenn OSCam A ein CW erhält, wird dies auf OSCam B geschoben. OSCam A fragt nicht mehr nach neuen ECMs<br />
<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = Anzahl der hops<br />
= default = 10<br />
<br />
Festlegen der maximalen hops für cache exchange. Zum pushen des lokalen caches 1 eintragen. Der Eintrag cacheex_maxhop = 0 bewirkt nur, dass der default-Wert von 10 genommen wird.<br />
<br />
<br />
==== logport ====<br />
{{Optional}}<br />
Logport für einen '''Camd 3.x'''-Reader. UDP muss aktiviert sein. Funktioniert nur, wenn in Camd 3.x kein Cascading stattfindet!<br />
logport = Port-Nummer<br />
= # kein Logport (default)<br />
<br />
<br />
==== ecmwhitelist ====<br />
{{Optional}}<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
definiert die gültige ECM-Länge in '''hex''' und provid für physische Reader<br />
<br />
Beispiel:<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = keine (default) und provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Im normalen Betrieb ist dieser Parameter nicht erforderlich!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|Liste mit ECM-Längen]]'''<br />
<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
Gültige ECM-Header mit CAID und provid '''in hex''' einsetzen.<br />
<br />
default: none, provid = 000000<br />
<br />
Ein Thread dazu ist [[Streamboard-Thread:34748|hier]] zu finden.<br />
<br />
Und hier findet man eine ständig gepflegte [[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] .<br />
<br />
<br />
==== ratelimitecm ====<br />
{{Optional}}<br />
Anzahl der unterschiedlichen SIDs die in ECMs innerhalb eines Intervalls erlaubt sind<br />
ratelimitecm = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = Anzahl<br />
<br />
Anzahl der ECM's mit "not found" Anwort bis der Reader neu gestartet wird, 0 = kein Limit (default)<br />
<br />
<br />
==== resetcycle ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5821:08/12/2011</span><br />
<br />
Anzahl von ECM's bis ein Reset des Cardreaders durchgeführt wird<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
resetcycle = 5 # Reset nach 5 ECM's<br />
= 0 # ausgeschaltet [default]<br />
<br />
<br />
==== ratelimittime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
Intervall für ein ratelimit<br />
ratelimittime = Millisekunden<br />
= 0 # (default)<br />
<br />
<br />
==== ecmunique ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = ermöglicht eine Überprüfung des matching ECM hash im ratelimit slot<br />
0 = default<br />
<br />
<br />
==== srvidholdtime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
srvidholdtime = Millisekunden<br />
<br />
Zeitraum, in dem die Service-ID im ratelimit slot gehalten werden soll. Während dieses Zeitraums ist der Zeit-Check für ecmunique ausgeschaltet. Default = 0<br />
<br />
<br />
==== cooldowndelay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5946:09/09/2011</span><br />
<br />
cooldowndelay <br />
<br />
Erläuterung:<br />
delay = Verzögerungszeit in Sekunden, in der dem Reader erlaubt ist, mehr ECM-Anfragen zu stellen,<br />
als im Parameter "ratelimitecm" festgelegt ist<br />
default: [blank] keine<br />
duration = Zeitdauer in Sekunden, die der Reader für einen cooldown benötigt<br />
default: [blank] keine<br />
<br />
'''Voraussetzung ist, dass die Parameter "ratelimitecm" und "ratelimittime" ausgefüllt sind!'''<br />
<br />
<br />
==== block and save ====<br />
Zur Thematik block, save, select und write EMM gibt es hier [[http://www.streamboard.tv/wiki/EMM]] ein besonderes Wiki!<br />
<br />
<br />
===== blocknano =====<br />
{{Optional}}<br />
Liste zu blockender EMM-Nanos (in hex) oder aller EMM-Nanos. Gilt nur für physikalische Reader!<br />
<br />
Beispiel<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
<br />
===== blockemm-u =====<br />
{{Optional}}<br />
''unique address-EMMs, entspricht D3 bei Sk*''<br />
blockemm-u = 1 # Blocke EMMs, die an die Karte direkt adressiert sind)<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-s =====<br />
{{Optional}}<br />
''shared address-EMMs, entspricht D2 bei Sk*''<br />
blockemm-s = 1 # Blocke EMMs, die an bestimmte Gruppen von Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-g =====<br />
{{Optional}}<br />
''global address-EMMs, entspricht D0 bei Sk*''<br />
blockemm-g = 1 # Blocke EMMs, die an alle Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-unknown =====<br />
{{Optional}}<br />
Blockiert alle unbekannten Arten von EMM<br />
blockemm-unknown = 1 # Blocke alle unbekannten Arten von EMMs<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-bylen =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8615:04/12/2013</span><br />
<br />
Blockiere alle Arten von EMMs anhand der Länge. Es werden maximal 10 Werte zugelassen.<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
= # [blank] keine Blockierung (default)<br />
<br />
Beispiel:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br />
===== via_emm_global =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9843:09/05/2014</span><br />
<br />
via_emm_global = 0|1<br />
<br />
ermöglicht die Filterung von globalen emm für '''viacces'''<br />
<br />
'''ausschließlich für camd35 (cs357x) Protokoll!'''<br />
<br />
0 = default<br />
<br />
<br />
===== saveemm-u =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unique-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-u = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-s =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere shared-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-s = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-g =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere global-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-g = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-unknown =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unknown-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-unknown = 1<br />
= 0 # (default)<br />
<br />
===== needsglobalfirst =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn11494:02/03/2019</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Nur für Cryptoworks Karten mit Caid 0D96 & 0D98'''<br />
<br />
Ist der Parameter gesetzt, wird nur noch ein global EMM pro shared EMM geschrieben. Der Rest der global EMMs wird geblockt. Dazu darf das Schreiben der global und shared EMMs nicht generell geblockt sein. Also Vorrausetzung ist: blockemm-s = 0 und blockemm-g = 0.<br />
<br />
needsglobalfirst = 0|1 - 0 default<br />
<br />
Beispiel<br />
needsglobalfirst = 1<br />
blockemm-g = 0<br />
blockemm-s = 0<br />
<br />
===== savenano =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn5947:09/09/2011</span><br />
<br />
Liste von EMM-Nanos, die gespeichert werden sollen (hex) oder alle EMM-Nanos. Der Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
<br />
===== readnano =====<br />
{{Optional}}<br />
Schreibt ein File (üblicherweise eine Copy des von savenano gesicherten files) in die SC. Wenn kein Pfad angegeben ist, wird danach im Konfigurations-Verzeichnis gesucht. <br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
readnano = /var/oscam/write.emm # Beispiel Pfad/Dateiname<br />
= write.emm # Nur Dateiname<br />
= # [blank] es wird kein File geschrieben (default)<br />
<br />
<br />
==== use-ssl ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
use_ssl = 1 # benutze SSL für ghttp protocol<br />
= 0 # default<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # weise falsche CW's zurück, sende "not found" an Stelle falscher CWs<br />
= 0 # default<br />
<br />
Die Option hat nur eine Wirkung auf dem oscam Server (oscam.server, [reader]), der die Karte direkt anspricht, also nicht auf einem Client. Betroffene Karten: CSAT (0100:003311)<br />
<br />
<br />
==== disablecrccws ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # unterdrücke den cw-checksum-test<br />
= 0 # cw-checksum-test eingeschaltet (default)<br />
<br />
Hier mal eine Erklärung von Bit aus dem SB:<br />
<br />
Das ist für den dänischen Provider BoxerTV.<br />
Die haben Gegenmassnahmen eingeleitet und die VIA Karten verdauen keine Checksum-korrigierten CWs mehr. Damit kann man die CW checksummenkorrektur bei diesen readern ausschalten.<br />
Dann geht's wieder bei BoxerTV-readern.<br />
(dropbadcws muss dann auf aus sein).<br />
...<br />
PS: die checksummenkorrektur ausschalten ist böse und entgegen des DVB-Standards! Benutzt diesen Parameter nur wenn Ihr ihn wirklich benötigt!<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID<br />
<br />
Exemple :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
<br />
==== lb_weight ====<br />
{{Optional}}<br />
Je höher dieser Wert, desto größer ist die Wahrscheinlichkeit, dass dieser Reader ausgesucht wird. Es ist ein Indikator für die durchschnittliche Antwortzeit innerhalb des Loadbalancing<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
<br />
Abwärts die durchschnittliche Antwortzeit des Readers. Von rechts nach links der Wert lb_weight. <br />
Im Mittelfeld könnt Ihr ablesen, wie die durchschnittliche Antwortzeit durch den lb_weight wert "korrigiert" wird.<br />
<br />
<br />
'''Beispiel:'''<br />
<br />
Du hast 2 Reader die beide eine durchschnittliche Antwortzeit von 400ms haben. Nun möchtest Du aber einen Reader bevorzugen indem Du dem Loadbalancer 300ms vorgaukeln willst.<br />
<br />
Also suchst Du die Zeile die mit 400 beginnt und wanderst auf dieser Zeile nach rechts bis du bei ~300 (in der tabelle findest du nur 30cool bist. Dann liest Du oben den Wert für lb_value ab den der Reader bekommt (130). Diesen trägst Du bei dem Reader ein und schon wird der Reader bevorzugt<br />
<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional}}<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
Zuordnung von Services an den Reader, welche durch den Loadbalancer nie geblockt werden sollen, default=none<br /><br />
<br />
<br />
==== lb_force_fallback ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = setzt den Reader ständig in fallback-modus für das load balancing ohne Berücksichtigung der reader statistics,<br /><br />
0 = default<br />
<br />
<br />
==== ccc ====<br />
===== cccversion =====<br />
{{Depends}}<br />
'''Nur für CCcam'''<br />
<br />
Definiert die Version von CCcam, die verwendet werden soll.<br />
<nowiki><mainversion>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
cccversion = 1.2.34<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
===== cccmaxhops =====<br />
{{Depends}}<br />
Legt das Maximum an Distance-Hops für die Karte fest<br />
0 = Nur lokale Karte<br />
1 = Lokale Karte + 1 Hop<br />
2 = Lokale Karte + 2 Hops<br />
und so weiter<br />
Default-Wert = 10<br />
<br />
<br />
===== ccchop =====<br />
{{Depends}}<br />
ccchop = hop<br />
<br />
Setzt den hop für '''nicht'''-cccam-reader<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Definiert den reshare-hop für CCcam-Reader<br />
<br />
cccreshare = hop<br />
= -1 # kein reshare<br />
= 0 # reshare für direct peer <br />
= 1 # reshare für direct peer und den nächsten Level<br />
= x # reshare für direct peer und die nächsten x (Anzahl) Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
===== cccwantemu =====<br />
{{Depends}}<br />
Anfrage, auch einen emu vom CCcam-Server zu erhalten.<br />
cccwantemu = 1 # ja<br />
= 0 # nein default<br />
<br />
<br />
===== ccckeepalive =====<br />
{{Depends}}<br />
Sendet eine "keepalive-message", um eine Verbindung zum remote CCCam-Server zu erhalten.<br />
ccckeepalive = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
===== cccreconnect =====<br />
{{Optional}}<br />
cccreconnect = timeout (ms)<br />
<br />
default = 12000 (ms)<br />
<br />
Wiederverbindung nach ECM-Request-Timeout in Millisekunden.<br />
Gilt nur für O-cccam reader, für cccam-ext Protokoll wird diese Zeit ignoriert.<br />
<br />
<br />
===== cccmindown =====<br />
{{Depends}}<br />
cccmindown = # Zahl<br />
= 0 default<br />
<br />
Filtert alle Reader mit hops, die kleiner sind als die eingesetzte Zahl<br />
<br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBOX läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
===== device =====<br />
{{Mandatory}}<br />
device = Komma-separierte Liste mit den Werten<br />
<br />
peer's IP oder Hostname<br />
peer's port<br />
<br />
Beispiel:<br />
device = 192.168.1.101,3820<br />
<br />
<br />
===== password =====<br />
{{Mandatory}}<br />
password = 4 hex bytes, 8 chars<br />
<br />
Peer Passwort<br />
<br />
Beispiel:<br />
password = A123BCDE<br />
<br />
===== gbox_reshare =====<br />
{{Optional}}<br />
Reshare-Level für lokale Karte(n), default = 2<br />
<br />
===== gbox_max_distance =====<br />
{{Optional}}<br />
gbox_max_distance = maximale Distanz zum Empfang von peer-cards, default = 2<br />
<br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional}}<br />
gbox_max_ecm_send = sende ecm zu maximal n peer cards, default = 3<br />
<br />
<br />
===== user =====<br />
{{Mandatory}}<br />
Benutzername (client) der oscam Gbox<br />
<br />
Beispiel<br />
user = gbox_client<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
'''Der user muss auch in der oscam.user als [account] eingetragen werden.'''<br />
<br />
'''Man sollte unbedingt für jeden gbox [reader] einen anderen user [account] benutzen.'''<br />
'''Nur dann sind die Peers im Log usw unterscheidbar.'''<br />
<br />
'''Unter [reader] und [account] sollten geeignete Filter gesetzt werden (services=, caid=, ident=), um Instabilitäten der GBOX durch<br />
'''Überfluten mit Karten zu vermeiden.'''<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.server&diff=13503
OSCam/de/Config/oscam.server
2019-02-04T18:25:53Z
<p>Felixka: /* oscam.server */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.server''' ==<br />
Diese Konfigurationsdatei enthält Reader-Parameter für OSCam. Die Abschnitte dürfen sich wiederholen (mehr als ein Reader möglich). Es muss aber in jedem Fall mindestens ein reader konfiguriert sein!<br />
<br />
Beispiel-Konfiguration für die wichtigsten Reader sind hier zu finden [[OSCam/de/examples/Reader|Beispiel-Konfigurationen]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
<br />
=== '''Reader''' ===<br />
'''Grundsatz:''' Es können mehrere [reader]-Abschnitte erstellt werden. Jeder vollständige Abschnitt wird dann als Reader verwendet. Er '''muss''' immer mit [reader] beginnen. Im Parameter "label" kann dann die Art des Readers beschrieben werden:<br />
<br />
Beispiele: easymouse, phönix, smargo, sc8in1 usw.<br />
<br />
<br />
==== label ====<br />
{{Mandatory}}<br />
<br />
Legt den Namen für diesen Reader fest.<br />
<br />
'''Der Name des Labels darf nicht identisch zu einem Usernamen (oscam.users) sein!'''<br />
<br />
<br />
Beispiel<br />
label = easymouse2<br />
<br />
<br />
==== enable ====<br />
{{Optional}}<br />
Reader aktivieren/deaktivieren<br />
enable = 0 # Reader aus<br />
= 1 # Reader ein (default)<br />
<br />
==== description ====<br />
{{Optional}}<br />
description = Text <br />
<br />
Beliebiger Text zur Beschreibung des readers; default: [blank] keine Beschreibung<br />
<br />
'''Nicht zu verwechseln mit ''label''!''' Hier kann zusätzlich eine Information hinterlegt werden, z.B. Reader nur für CI+ usw.<br />
<br />
<br />
==== protocol ====<br />
{{Mandatory}}<br />
Kommunikationsprotokoll für den Reader.<br />
protocol = mouse # (Lokaler Cardreader)<br />
= internal # (Alle Cardreader mit einem "Device=/dev/sciX", sowie interne Coolstream-Reader)<br />
= camd35|cs357x # (Cascading - camd 3.5-kompatibler Remote-Server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x # (camd 3.5-kompatibler Remote-Server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1 # (SC8in1 und MCR 4/8 Cardreader)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''smartreader:''' Es können Probleme auftreten, wenn der Cardreader im smartreader-Modus in einem USB-Hub betrieben wird.<br />
In diesem Fall den Cardreader direkt am PC/Receiver einstecken und erneut testen.<br />
Sollte es dann funktionieren, ggf. einen anderen USB-Hub besorgen.<br />
<br />
<br />
==== device ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8911:09/10/2013</span><br />
<br />
Legt den local oder remote reader Abschnitt [reader] fest:<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw <br />
<br />
Bestimmt den reader type:<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3 <br />
bus:device: Bus- und Device-Namen von Smartreader+ oder Infinity USB (mit lsusb 'Bus' und 'Device' holen)<br />
serialnum: Serial-Nummer des Smartreader+ oder Infinity USB<br />
device: Name der Device<br />
device:slot: device name und slot-nummer '''für sc8in1''' (1-8)<br />
'''Es wird nur ein SC8in1 unterstützt!'''<br />
ip|hostname: IP-Adresse oder Hostname<br />
port: TCP/IP port <br />
lport: Remapping für den Local-Port (TCP/IP)<br />
PCSC: Nummer des PCSC-Readers (mit 0 starten!)<br />
Alternativ kann über den Namen des Readers (bzw. einen Teil davon) selektiert werden, z.B. "-1:SCR 3310" (Namen der erkannten Reader werden bei "oscam -d 32" ausgegeben)<br />
0|1: '''Nur für die Coolstream HD-1''' (Reader 0 oder 1 auswählen)<br />
constantcw: Dateiname für das Constant-CW-File<br />
<br />
Format des CW-Files: <br />
'''Standard-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
Beispiele für device--parameter:<br />
device = /dev/ttyS0 # Reader an COM1 (bei Linux i386 und Windows)<br />
device = /dev/tts/1 # Reader an COM2 (Linux dbox2 mit multicam)<br />
device = /dev/ttyUSB0 # Reader an USB (Linux i386)<br />
device = Serial:Reader 1 # z.B. Smargo im smartreader-Modus, wobei die Kennung "Reader 1" der Smargo-Konfiguration zu entnehmen ist!<br />
device = /var/keys/constant.cw # Einbindung eines constantcw<br />
device = /dev/ttyUSB0:1 # Slot 1 eines SC8in1 oder MCR 4/8 (Linux i386)<br />
<br />
'''Hinweis:''' Der Zähler für die Device liegt immer um 1 hinter der Nummer des COM-Ports! Also ttyS0 = COM1, tts/1 = COM2. Bei Benutzung neuerer PC sind kaum noch serielle Anschlüsse vorhanden, sodass in diesen Fällen USB 2.0 benutzt werden muss. Hier am besten im Gerätemanager des PC nachschauen, welcher COM-Port dem Reader zugewiesen wurde und in die Device den Port -1 eintragen!<br />
<br />
==== detect ====<br />
{{Depends}}<br />
Der Card Status (Karte im Reader eingeführt oder entfernt) wird detektiert mit Hilfe einer handshake input Leitung der seriellen Schnittstelle (UART/SCI) - cd, cts, dsr oder ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" bedeutet: Keine Leitung zum detektieren des Card Status vorhanden. Karte wird immer als im Kartenleser gesteckt erkannt.<br />
<br />
* Falls das detect signal invertiert ist: prefix "!" (eg "detect = !cts")<br />
<br />
<br />
Falls Parameter '''use_gpio = 1''' gesetzt ist:<br />
<br />
detect = gpio1...gpio7 - Card Status wird über einen gpio erfasst. GPIO means "general purpose input output". <br />
<br />
<br />
Beispiel:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
'''protocol = mouse'''<br />
'''device = /dev/ttyUSB0''' (easymouse 2)<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends}}<br />
Benutze gpio als card detect/ reset. Siehe auch '''detect ='''<br />
use_gpio = 0|1 #default = 0<br />
<br />
==== cardmhz ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
'''Standard'''-Frequenz der Karte in Schritten von 10 KHz. Für Irdeto-Karten z.B. "cardmhz = 600" (6 Mhz)<br />
<br />
Beispiel:<br />
cardmhz = 600 # Irdetokarte<br />
= # [blank] Default-Wert 357<br />
<br />
'''Interne-Dreambox-Leser'''<br />
<br />
Wenn cardmhz >2000 eingetragen wird aktiviert OScam den PLL-Clock. Interne-Dreambox-Leser (Dream Multimedia GmbH und Clones) können damit optimal getaktet werden.<br />
<br />
Der verwendete cardmhz-wert entspricht dem höchsten PLL-Takt. OSCam wird dann den optimalen PLL-Teiler berechnen damit die Frequenz möglichst nahe an den Wert kommt welcher bei "mhz" definiert wurde.<br />
<br />
Benutze die folgenden Einstellungen:<br />
<br />
Modelle mit PPC-CPU (DM500/DM600/DM7000/DM7020): "cardmhz = 3150"<br />
<br />
Modelle mit MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.): "cardmhz = 2700"<br />
<br />
Die DM7025 ist speziell: "cardmhz = 8300"<br />
<br />
'''Wird nur der Parameter cardmhz gesetzt (ohne mhz = xxx) wird die Karte automatisch anhand des ATR getaktet!'''<br />
<br />
Beispiel:<br />
Du hast eine Dream 800 HD PVR, das ist eine MIPS, daher muss du "cardmhz = 2700" setzen. Nehmen wir an du hast eine Nagra-Karte welche auf 5 MHz laufen soll.<br />
Wenn du die Karte richtig takten willst verwende "cardmhz = 2700" und "mhz = 500", Oscam taktet die Karte dann mit der nächst möglichen Frequenz (4.50 Mhz).<br />
Möchtest du sie übertakten, dann verwende "cardmhz = 2700" und z.B. "mhz = 900".<br />
Deine Karte läuft nun auf 9 Mhz. Aber vorsichtig, eine übertaktete Karte kann heiss und instabil werden! ([[OSCam/de/examples/Overclocking|Overclocking]] beachten!)<br />
<br />
Viele Interne-Leser von anderen Herstellern als Dream ignorieren die eingestellten Werte! Aber du solltest "cardmhz" und mhz" trotzdem setzen da es zum berechnen der richtigen "timings" verwendet wird. Wenn du cardmhz/mhz richtig setzt ist das "timing" besser für die aktuelle (automatisch gesetzte) Frequenz des Internen-Lesers. Als Ergebnis bekommst du bessere ECM-Zeiten oder mehr Stabilität.<br />
<br />
Erwarte keine Wunder, nur ein übertakten der Karte bringt bessere ECM-Zeiten. Schlechtes "timing" kann jedoch zu verzögerungen führen oder die Karte instabil machen.<br />
<br />
'''Nützliche Links:'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|Liste verschiedener Karten und ihren Frequenzen]]'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
==== mhz ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
mhz = Frequenz in KHz<br />
<br />
Sofern dies technisch möglich ist kann abweichend von '''cardmhz''' die Frequenz des Kartenlesers anders (in der Regel höher) als die Standard-Frequenz der Karte eingestellt werden (in 10 KHz-Schritten). Man spricht dann von [[OSCam/de/examples/Overclocking|Overclocking]]. So kann z.B. eine S02-Karte (Standard 6 MHz) mit 10 MHz übertaktet werden.<br />
<br />
Beispiel Externe-Reader:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
Beispiel DM800:<br />
cardmhz = 2700 # (27MHz PLL)<br />
mhz = 900 # (Wert wird berechnet -> 27Mhz : 3 = 9 Mhz)<br />
<br />
Hier eine ausführlichere Beschreibung von '''stefansat''' aus der Distri-Doku:<br />
<br />
Wenn die Frequenz in '''mhz''' größer ist als in '''cardmhz''', dann befindest Du dich im [[OSCam/de/examples/Overclocking|Overclocking]] Modus.<br />
<br />
Smargo-Reader und interne Reader der Dreamboxen werden durch den '''ATR''' automatisch eingestellt, wenn '''autospeed = 1''' (siehe nächsten Parameter) gesetzt ist.<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
<br />
==== autospeed ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
1 = setzt den mhz-Wert anhand des ATR (default)<br />
0 = disabled<br />
<br />
<br />
==== deprecated ====<br />
{{Optional}}<br />
Zuerst wird die Smartcard im Normal-Modus initialisiert. Schlägt dies fehl, wird die Initialisierung automatisch auf den veralteten Modus umgeschaltet, so dass die Smartcard-Geschwindigkeit nicht verändert wird und die Kommunikation auf normaler ATR Geschwindigkeit von 9600 Baud bleibt.<br />
deprecated = 1 # ausschließlich veralteter Modus<br />
= 0 # default<br />
<br />
<br />
==== mode ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Nur für AZBox'''<br />
<br />
mode = 1 # AzBox-Reader<br />
= 0 # default<br />
Setzt den Init-Mode für die Karte im internen AZBox-reader<br />
<br />
<br />
==== device_out_endpoint ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8013:12/29/2012</span><br />
<br />
Setzt die Addresse des Endpunkts für FTDI-Chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
<br />
==== smargopatch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet den workaround für smargoreader+ und reader ein, bis der native mode funktioniert<br />
smargopatch = 1<br />
= 0 (default)<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet fix für SC8in1/MCR DTR/RTS kernel bug ein<br />
sc8in1_dtrrts_patch = 1<br />
= 0 # (default)<br />
<br />
<br />
==== cool_timeout_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6286:01/23/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Setzt beim init der SC einen timeout in Millisekunden fest (im internen Reader).<br />
cool_timeout_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Hier kann ein timeout der SC für read/transmit nach dem init in Millisekunden festgelegt werden (nur für interne Reader).<br />
cool_timeout_after_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9568:03/16/2014</span><br />
<br />
Fügt einen Controll-Check für Pin Payload von NDS Videoguard Karten hinzu (4 Hex-Bytes). '''Gültig nur für physikalische Reader'''<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
<br />
==== ins7e ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5959:09/22/2011</span><br />
<br />
Füge 26 hex-bytes payload für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e = payload<br />
= # [blank] default (none)<br />
<br />
<br />
==== ins7e11 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6064:12/06/2011</span><br />
<br />
Füge TA1 für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e11 = TA1 Byte<br />
= # [blank] default (none)<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
<br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9884:09/30/2014</span><br />
{{Optional}}<br />
schaltet den 0x07-EMM-Fix für NDS Videoguard 2 Karten ein. '''Gültig nur für physikalische Reader'''<br />
fix07 = 1 # 0x07-EMM-Fix eingeschaltet (default)<br />
= 0 # ausgeschaltet <br />
<br />
<br />
==== force_irdeto ====<br />
{{Optional}}<br />
Forciert den Irdeto-Modus, auch wenn ein RSA-Key für Irdeto getunnelte Nagravisions-Karte vorliegt.<br />
force_irdeto = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
==== nagra_read ====<br />
{{Optional}}<br />
Lese Nagravision-Records. '''Nur für NCMED-Karten'''<br />
nagra_read = 0 # ausgeschaltet (default)<br />
= 1 # lese alle Records mit abgelaufenen Rechten<br />
= 2 # lese nur Records mit gültigen Rechten<br />
<br />
<br />
==== rsakey ====<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7046:06/12/12</span><br />
{{Optional}}<br />
<br />
RSA key für Nagravision/Tiger SCs / CAM key data für Irdeto SCs, Conax SCs<br />
rsakey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== fix9993 ====<br />
{{Optional}}<br />
fix9993 = 0|1<br />
<br />
Fixed den error 9993 bei CAID 0919 SC's<br />
<br />
fix9993 = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== readtiers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
Methode wie die Tiers von NDS Videoguard Smartcards ausgelesen werden.<br />
<br />
readtiers = 0 # ausgeschaltet (default)<br />
readtiers = 1 # ins70 (neue) Methode <br />
readtiers = 2 # ins76 (alte) Methode <br />
<br />
==== boxkey ====<br />
{{Optional}}<br />
Boxkey für Nagravision SCs / CAM key für Irdeto SCs<br />
boxkey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== pincode ====<br />
{{Optional}}<br />
Pincode für '''Conax-, Cryptoworks- und Viaccess-''' Karten.<br />
pincode = code<br />
= # [blank] default<br />
<br />
<br />
==== boxid ====<br />
{{Optional}}<br />
ID der '''NDS-Reciever-Box'''<br />
boxid = NDS box ID<br />
= # [blank] default<br />
<br />
<br />
==== ndsversion ====<br />
{{Optional}}<br />
Version von '''NDS Videoguard''' einsetzen<br />
ndsversion = 0 # autodetection (default)<br />
ndsversion = 1 # NDS Videoguard 1<br />
ndsversion = 12 # NDS Videoguard 1+<br />
ndsversion = 2 # NDS Videoguard 2<br />
<br />
<br />
==== aeskeys ====<br />
{{Optional}}<br />
Multiple AES-Keys für '''Viacces-Karten'''<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
Spezial AES Keys:<br />
00 = schicke keine CW zurück, es ist kein AES-Key spezifiziert<br />
FF = schicke CW zurück, die vom S empfangen wurden, es ist kein AES-Key spezifiziert<br />
<br />
Beispiel<br />
aeskeys = 0100@012345:000102030405060708090a0b0c0d0e0f;0200@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6624;04/23/2012</span><br />
{{Optional}}<br />
Anzahl der Subscritions-Klassen für '''Viacces'''<br />
schowcls = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== key ====<br />
{{Depends}}<br />
Key für Newcamd remote reader encription<br />
key = DES key<br />
<br />
<br />
==== user ====<br />
{{Optional}}<br />
Username für Remote-Reader.<br />
<br />
Beispiel<br />
user = # xyxyx<br />
<br />
<br />
==== password ====<br />
{{Optional}}<br />
Passwort für Remote-Reader.<br />
<br />
Beispiel<br />
password = # xyxyx<br />
<br />
<br />
==== mg-encrypted ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO</span><br />
<br />
mgcamd encrypted line für '''GBox!'''<br />
<br />
Format:<br />
<br />
mg-encrypted = D: { <IP|hostname> { <local port> <remote port> { <password> { <level> <level> }}}}[,<local MAC address>] # default MAC address=eth0<br />
<br />
default:<br />
mg-encrypted = # [blank] (none)<br />
<br />
<br />
==== services ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' <br />
<br />
Wenn Loadbalancing aktiviert ist, sind folgende Besonderheiten zu berücksichtigen:<br />
* Services sind für den Loadbalancer eine '''Whitelist'''. Das bedeutet, dass alles, was hier eingetragen wird, vom Loadbalancing als Service behandelt wird, den die Karte '''kann'''! Wenn dann z.B. ein "not found" kommt, wird das ignoriert und die Karte wird weiter angefragt, mit dem damit verbundenen traffic!<br />
* Daraus ergibt sich, dass der Eintrag von Services bei '''lokalen''' Karten und Proxies, '''die man genau kennt''', kein Problem darstellt.<br />
* Anders verhält es sich bei Proxies (z.B. CCcam), deren Services '''man nicht kennt'''. Hier ist davon abzuraten, Services einzutragen. In einem solchen Fall sollten vielmehr die Services bestimmt werden, die '''nicht zu berücksichtigen''' sind (Eintrag mit (!)), oder besser eine Filterung über den Parameter '''caid''' erfolgen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Die Anzahl der services, die je reader berücksichtigt werden, ist auf 64 begrenzt, also 64 mal [[service-name][CAID][provid][srvid]]! <br />
<br />
Welche Services kann der Reader. Hierzu muss eine oscam.services vorhanden sein. Die Logik ist hier folgendermaßen (in der angegebenen Reihenfolge):<br />
* Wenn das Feld leer ist (oder ungültig) wird die Anfrage erlaubt.<br />
* Wenn ein negativer Service (also solche mit "!") zutreffend ist, so wird die Anfrage abgewiesen.<br />
* Wenn ein positiver Service zutreffend ist oder es gar keinen positiven Service gibt, so wird die Anfrage erlaubt.<br />
* Wenn keiner der vorigen Punkte zutrifft, so wird die Anfrage abgewiesen.<br />
Dies bedeutet, dass negative Services nur in Einzelfällen nötig sind. Nämlich genau dann, wenn man positive Services hat, davon aber wieder einige ausnehmen will. Dies wird nicht empfohlen, da es hier schnell zu Fehlkonfigurationen kommt. Stattdessen sollte ein zusätzlicher Service angelegt werden, der alle entsprechenden Sender enthält.<br />
services = [!]services[,[!]<services>]...<br />
= [blank] ist default<br />
<br />
Beispiel<br />
services = skywelt,skyweltextra,!skyfilm<br />
# skywelt und skywelt extra sind zugeordnet, skyfilm ist ausgeschlossen<br />
<br />
<br />
==== caid ====<br />
{{Optional}}<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
definiert und mapped CAIDs für Reader<br />
<br />
Beispiele:<br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut für das Beispiel oben)<br />
default: alle CAIDs mit der Maske FFFF<br />
<br />
<br />
==== ident ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Wenn in oscam.conf [global] unter lb_mode loadbalancing aktiviert ist, dann dürfen hier keine Einträge stehen!<br />
<br />
Definiert CAID und Ident '''kartenspezifisch''' für den Reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Beispiel<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] Keine Definition (default)<br />
<br />
<br />
==== class ====<br />
{{Optional}}<br />
Definiert Class '''in hexadecimal''' kartenspezifisch für den Reader:<br />
class = 01,02,!1b,!2b # 01 und 01 ja, 1b und 2b nein<br />
= # [blank] Keine Definition (default)<br />
<br />
<br />
==== chid ====<br />
{{Optional}}<br />
Definiert '''Irdeto'''-ChID für den Reader.<br />
<br />
Beispiel<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
<br />
==== group ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6103:12/21/2011</span><br />
<br />
Jeder Reader muss in einer oder mehrere Gruppen eingetragen sein. Damit lässt sich bestimmen, welcher Client auf welchen Reader Zugriff hat. Gültige Werte 1-64<br />
group = 1....64[,1....64]....<br />
<br />
'''Da ein Eintrag zwingend ist, darf hier kein [blank] als default stehen!'''<br />
<br />
Beispiel<br />
Group = 1 # (eine Gruppe)<br />
Group = 1,4,5 # (mehrere Gruppen)<br />
<br />
<br />
==== audisabled ====<br />
{{Optional}}<br />
Schließt den Reader vom AU (Auto-Updating) aus<br />
audisabled = 1 # ausgeschlossen<br />
= 0 # nicht ausgeschlossen (default)<br />
<br />
<br />
==== auprovid ====<br />
{{Optional}}<br />
Hier kann die Provider-ID festgelegt werden, damit der richtige Reader für das AU zur Verfügung steht<br />
<br />
Beispiel<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
<br />
==== disableserverfilter ====<br />
{{Optional}}<br />
Ignoriert CAID und Ident-Einstellungen des Readers bei fehlerhaften Clients.<br />
disableserverfilter = 1 # ignoriert<br />
= 0 # ignoriert nicht (default)<br />
<br />
<br />
==== inactivitytimeout ====<br />
{{Depends}}<br />
Für alle TCP-basierende remote Reader<br />
<br />
inactivitytimeout = # in Sekunden<br />
= -1 # Verbindet '''newcamd''' basierende Reader bei einem Netzwerkausfall erneut (auch im Leelauf - idle -)<br />
= 0 # default<br />
<br />
<br />
==== reconnecttimeout ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7244:08/07/2012</span><br />
<br />
Zeitspanne in Sekunden für eine Wiederverbindung mit einem Remote-Reader, wenn Antworten ausbleiben<br />
<br />
Beispiel<br />
reconnecttimeout = 20 # Nach 20 Sekunden ohne Antworten wird wiederverbunden<br />
= # [blank] default 30 Sekunden<br />
<br />
<br />
==== connectoninit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = Ermöglicht die Herstellung einer Newcamd-Verbindung, solange noch kein Request vorliegt<br />
0 = default<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = ermöglicht es einem cs378x TCP socket, ständig verbunden zu sein<br />
0 = Immer eingeschaltet bei einem cacheex reader type (default)<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Definiert diesen Reader als Fallback. Standard- und Fallback-Reader müssen in der selben Gruppe sein. Siehe '''group'''!<br />
fallback = 1 # Fallbackreader<br />
= 0 # Kein Fallbackreader (default)<br />
<br />
'''Info:'''<br />
<br />
Ist Loadbalancing aktiviert, und zusätzlich der Parameter "cwcycle_allowbadfromffb = 1", wird dieser Reader ein fixed Fallback für CacheEx.<br />
Somit wird er verwendet wenn ein Bad Cycle erkannt wird, damit freetzer entsprechend verhindert werden können.<br />
--> siehe [[OSCam/de/Config/oscam.conf#cwcycle_allowbadfromffb|cwcycle_allowbadfromffb]]<br />
<br />
<br />
==== fallback_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
Benutze den Reader nur als fallback für vorher definierte CAIDs, two-digit wildcards sind möglich. Dieser Parameter überschreibt den Parameter fallback!<br />
Default = none<br />
<br />
Beispiel:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional}}<br />
Definition des EMM-Caches für den Reader. Derzeit nur für lokale Reader. Betrifft die AU-Funktion. Damit kann entschieden werden, ob Update-Kommandos (EMM) vom Provider immer oder nur unter bestimmten Voraussetzungen geschrieben werden.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
Ohne diesen Parameter werden keine EMM im Log angezeigt!<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # cache/stats aus (default)<br />
* <usecache> 1 = # cache/stats ein und schreibe sie in eine Datei wenn oscam beendet wird<br />
* <usecache> 2 = # cache/stats ein, aber schreibe sie beim beenden von oscam <ins>nicht</ins> in eine Datei<br />
<br />
* <rewrite> n = # Wie oft ein und das selbe Update-Kommando (EMM) geschrieben wird. ''Gilt nur bei <usecache> = 1 oder 2''<br />
<br />
* <logging> 0 = # Einträge im Logfile ausgeschaltet (default)<br />
* <logging> 1 = # Nur fehlerhafte EMM werden geloggt<br />
* <logging> 2 = # die geschriebenen (written) EMM werden geloggt<br />
* <logging> 4 = # die zurückgewiesenen (skipped) EMM werden geloggt<br />
* <logging> 8 = # die blockierten (blocked) EMM werden geloggt<br />
* <logging> 16 = # disabled AU werden geloggt<br />
Aufsummieren der Werte ist möglich, 31 wird also alle loggen.<br />
<br />
* <stb-emm> 0 = # EMM für die STB werden ignoriert (default)<br />
* <stb-emm> 1 = # EMM für die STB werden zum Reader gesendet (nur sehr spezifisch nötig)<br />
<br />
Beispiele:<br />
emmcache = 1,3,10,0 # Cache ein, 3 x schreiben, die geschriebenen (2) und die geblockten (8) = 10 loggen, keine stb-emm senden<br />
emmcache = 1,2,6,1 # Cache ein, 2 x schreiben, die geschriebenen (2) und die zurückgewiesenen (4) = 6 loggen, stb-emm senden<br />
<br />
'''stb-emm''': ist nur für einige Viaccess-User sinnvoll (siehe Commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) und '''bestimmt nicht für User mit einer echten Karte im Reader'''.<br />
<br />
Dazu [http://www.streamboard.tv/wbb2/thread.php?postid=538345#post538345 noch ein Zitat vom User ''pr2'']: "In Viaccess sahen wir einige EMM-G, die für die Set-Top-Box(STB) waren und nicht für die Karte, deshalb nennen wir das STB-EMM. Diese EMMs setzen den Overencryption-Key (AES) in der STB für die Verschlüsselung der Kommunikation zwischen STB und Karte."<br />
<br />
<br />
==== emmreassembly ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8591:04/01/2013 Parameter jetzt in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = schaltet Neuaufbau von EMM ein, default<br />
0 = schaltet Neuaufbau von EMM aus<br />
<br />
Sollte bei '''Viaccess und Cryptoworks Readern''' gesetzt werden, wenn der Client, der für das Senden von EMMs benutzt wird, die EMMs neu aufbaut anstelle sie an OScam zur Bearbeitung zu senden.<br />
<br />
<br />
==== cacheex ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
cacheex = 1 # enable cache exchange pull mode<br />
cacheex = 2 # enable cache exchange push mode<br />
cacheex = 3 # enable cache exchange revers push mode<br />
cacheex = 0 # aus (default)<br />
<br />
Identische modes müssen bei local OSCam server und remote OSCam user account gesetzt werden!<br />
Nur für camd3.5x und CCcam Protokolle!<br />
<br />
Siehe auch entsprechenden Parameter in oscam.user!<br />
<br />
[[Datei:MessageS.png|text-bottom]]'''Ein ausführliches How-To findet man [[Streamboard-Post:406230|hier]]'''<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam A erhält eine ECM Anfrage, reader1 sendet diese Anfrage an OSCam B,<br />
<br />
OSCam B prüft seinen cache:<br />
* im cache wird nichts gefunden: OSCam B sendet: NOK<br />
* im cache wird etwas gefunden; OSCam B sendet: OK+CW<br />
* im cache wird nichts gefunden aber es wird eine anstehende Anfrage festgestellt: ''cacheexwaittime'' in oscam.conf [global] wird abgewartet und dann erneut geprüft. OSCam B fragt nicht mehr nach neuen EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 2<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 2<br />
<br />
Wenn OSCam B ein CW erhält, wird es auf OSCam A geschoben. Der Reader hat normale Funktionen und kann ECMs anfragen.<br />
* Problem: OSCAM kann nur dann CW's auf OSCam A schieben, wenn OSCam A verbunden ist<br />
* Problem oder feature?: OSCam A kann ECMs von OSCam B anfragen<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 ist gesetzt auf cacheex = 3<br />
<br />
Wenn OSCam A ein CW erhält, wird dies auf OSCam B geschoben. OSCam A fragt nicht mehr nach neuen ECMs<br />
<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = Anzahl der hops<br />
= default = 10<br />
<br />
Festlegen der maximalen hops für cache exchange. Zum pushen des lokalen caches 1 eintragen. Der Eintrag cacheex_maxhop = 0 bewirkt nur, dass der default-Wert von 10 genommen wird.<br />
<br />
<br />
==== logport ====<br />
{{Optional}}<br />
Logport für einen '''Camd 3.x'''-Reader. UDP muss aktiviert sein. Funktioniert nur, wenn in Camd 3.x kein Cascading stattfindet!<br />
logport = Port-Nummer<br />
= # kein Logport (default)<br />
<br />
<br />
==== ecmwhitelist ====<br />
{{Optional}}<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
definiert die gültige ECM-Länge in '''hex''' und provid für physische Reader<br />
<br />
Beispiel:<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = keine (default) und provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Im normalen Betrieb ist dieser Parameter nicht erforderlich!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|Liste mit ECM-Längen]]'''<br />
<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
Gültige ECM-Header mit CAID und provid '''in hex''' einsetzen.<br />
<br />
default: none, provid = 000000<br />
<br />
Ein Thread dazu ist [[Streamboard-Thread:34748|hier]] zu finden.<br />
<br />
Und hier findet man eine ständig gepflegte [[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] .<br />
<br />
<br />
==== ratelimitecm ====<br />
{{Optional}}<br />
Anzahl der unterschiedlichen SIDs die in ECMs innerhalb eines Intervalls erlaubt sind<br />
ratelimitecm = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = Anzahl<br />
<br />
Anzahl der ECM's mit "not found" Anwort bis der Reader neu gestartet wird, 0 = kein Limit (default)<br />
<br />
<br />
==== resetcycle ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5821:08/12/2011</span><br />
<br />
Anzahl von ECM's bis ein Reset des Cardreaders durchgeführt wird<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
resetcycle = 5 # Reset nach 5 ECM's<br />
= 0 # ausgeschaltet [default]<br />
<br />
<br />
==== ratelimittime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
Intervall für ein ratelimit<br />
ratelimittime = Millisekunden<br />
= 0 # (default)<br />
<br />
<br />
==== ecmunique ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = ermöglicht eine Überprüfung des matching ECM hash im ratelimit slot<br />
0 = default<br />
<br />
<br />
==== srvidholdtime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
srvidholdtime = Millisekunden<br />
<br />
Zeitraum, in dem die Service-ID im ratelimit slot gehalten werden soll. Während dieses Zeitraums ist der Zeit-Check für ecmunique ausgeschaltet. Default = 0<br />
<br />
<br />
==== cooldowndelay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5946:09/09/2011</span><br />
<br />
cooldowndelay <br />
<br />
Erläuterung:<br />
delay = Verzögerungszeit in Sekunden, in der dem Reader erlaubt ist, mehr ECM-Anfragen zu stellen,<br />
als im Parameter "ratelimitecm" festgelegt ist<br />
default: [blank] keine<br />
duration = Zeitdauer in Sekunden, die der Reader für einen cooldown benötigt<br />
default: [blank] keine<br />
<br />
'''Voraussetzung ist, dass die Parameter "ratelimitecm" und "ratelimittime" ausgefüllt sind!'''<br />
<br />
<br />
==== block and save ====<br />
Zur Thematik block, save, select und write EMM gibt es hier [[http://www.streamboard.tv/wiki/EMM]] ein besonderes Wiki!<br />
<br />
<br />
===== blocknano =====<br />
{{Optional}}<br />
Liste zu blockender EMM-Nanos (in hex) oder aller EMM-Nanos. Gilt nur für physikalische Reader!<br />
<br />
Beispiel<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
<br />
===== blockemm-u =====<br />
{{Optional}}<br />
''unique address-EMMs, entspricht D3 bei Sk*''<br />
blockemm-u = 1 # Blocke EMMs, die an die Karte direkt adressiert sind)<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-s =====<br />
{{Optional}}<br />
''shared address-EMMs, entspricht D2 bei Sk*''<br />
blockemm-s = 1 # Blocke EMMs, die an bestimmte Gruppen von Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-g =====<br />
{{Optional}}<br />
''global address-EMMs, entspricht D0 bei Sk*''<br />
blockemm-g = 1 # Blocke EMMs, die an alle Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-unknown =====<br />
{{Optional}}<br />
Blockiert alle unbekannten Arten von EMM<br />
blockemm-unknown = 1 # Blocke alle unbekannten Arten von EMMs<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-bylen =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8615:04/12/2013</span><br />
<br />
Blockiere alle Arten von EMMs anhand der Länge. Es werden maximal 10 Werte zugelassen.<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
= # [blank] keine Blockierung (default)<br />
<br />
Beispiel:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br />
===== via_emm_global =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9843:09/05/2014</span><br />
<br />
via_emm_global = 0|1<br />
<br />
ermöglicht die Filterung von globalen emm für '''viacces'''<br />
<br />
'''ausschließlich für camd35 (cs357x) Protokoll!'''<br />
<br />
0 = default<br />
<br />
<br />
===== saveemm-u =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unique-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-u = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-s =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere shared-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-s = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-g =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere global-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-g = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-unknown =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unknown-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-unknown = 1<br />
= 0 # (default)<br />
<br />
===== needsglobalfirst =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn11494:02/03/2019</span><br />
[[Datei:WarningS.png|text-bottom]] '''Nur für Cryptoworks Karten mit Caid 0D96 & 0D98'''<br />
<br />
Ist der Parameter gesetzt, wird nur noch ein global EMM pro shared EMM geschrieben. Der Rest der global EMMs wird geblockt. Dazu darf das Schreiben der global und shared EMMs nicht generell geblockt sein. Also Vorrausetzung ist: blockemm-s = 0 und blockemm-g = 0.<br />
<br />
needsglobalfirst = 0|1 - 0 default<br />
<br />
Beispiel<br />
needsglobalfirst = 1<br />
blockemm-g = 0<br />
blockemm-s = 0<br />
<br />
<br />
===== savenano =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn5947:09/09/2011</span><br />
<br />
Liste von EMM-Nanos, die gespeichert werden sollen (hex) oder alle EMM-Nanos. Der Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
<br />
===== readnano =====<br />
{{Optional}}<br />
Schreibt ein File (üblicherweise eine Copy des von savenano gesicherten files) in die SC. Wenn kein Pfad angegeben ist, wird danach im Konfigurations-Verzeichnis gesucht. <br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
readnano = /var/oscam/write.emm # Beispiel Pfad/Dateiname<br />
= write.emm # Nur Dateiname<br />
= # [blank] es wird kein File geschrieben (default)<br />
<br />
<br />
==== use-ssl ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
use_ssl = 1 # benutze SSL für ghttp protocol<br />
= 0 # default<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # weise falsche CW's zurück, sende "not found" an Stelle falscher CWs<br />
= 0 # default<br />
<br />
Die Option hat nur eine Wirkung auf dem oscam Server (oscam.server, [reader]), der die Karte direkt anspricht, also nicht auf einem Client. Betroffene Karten: CSAT (0100:003311)<br />
<br />
<br />
==== disablecrccws ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # unterdrücke den cw-checksum-test<br />
= 0 # cw-checksum-test eingeschaltet (default)<br />
<br />
Hier mal eine Erklärung von Bit aus dem SB:<br />
<br />
Das ist für den dänischen Provider BoxerTV.<br />
Die haben Gegenmassnahmen eingeleitet und die VIA Karten verdauen keine Checksum-korrigierten CWs mehr. Damit kann man die CW checksummenkorrektur bei diesen readern ausschalten.<br />
Dann geht's wieder bei BoxerTV-readern.<br />
(dropbadcws muss dann auf aus sein).<br />
...<br />
PS: die checksummenkorrektur ausschalten ist böse und entgegen des DVB-Standards! Benutzt diesen Parameter nur wenn Ihr ihn wirklich benötigt!<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID<br />
<br />
Exemple :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
<br />
==== lb_weight ====<br />
{{Optional}}<br />
Je höher dieser Wert, desto größer ist die Wahrscheinlichkeit, dass dieser Reader ausgesucht wird. Es ist ein Indikator für die durchschnittliche Antwortzeit innerhalb des Loadbalancing<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
<br />
Abwärts die durchschnittliche Antwortzeit des Readers. Von rechts nach links der Wert lb_weight. <br />
Im Mittelfeld könnt Ihr ablesen, wie die durchschnittliche Antwortzeit durch den lb_weight wert "korrigiert" wird.<br />
<br />
<br />
'''Beispiel:'''<br />
<br />
Du hast 2 Reader die beide eine durchschnittliche Antwortzeit von 400ms haben. Nun möchtest Du aber einen Reader bevorzugen indem Du dem Loadbalancer 300ms vorgaukeln willst.<br />
<br />
Also suchst Du die Zeile die mit 400 beginnt und wanderst auf dieser Zeile nach rechts bis du bei ~300 (in der tabelle findest du nur 30cool bist. Dann liest Du oben den Wert für lb_value ab den der Reader bekommt (130). Diesen trägst Du bei dem Reader ein und schon wird der Reader bevorzugt<br />
<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional}}<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
Zuordnung von Services an den Reader, welche durch den Loadbalancer nie geblockt werden sollen, default=none<br /><br />
<br />
<br />
==== lb_force_fallback ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = setzt den Reader ständig in fallback-modus für das load balancing ohne Berücksichtigung der reader statistics,<br /><br />
0 = default<br />
<br />
<br />
==== ccc ====<br />
===== cccversion =====<br />
{{Depends}}<br />
'''Nur für CCcam'''<br />
<br />
Definiert die Version von CCcam, die verwendet werden soll.<br />
<nowiki><mainversion>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
cccversion = 1.2.34<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
===== cccmaxhops =====<br />
{{Depends}}<br />
Legt das Maximum an Distance-Hops für die Karte fest<br />
0 = Nur lokale Karte<br />
1 = Lokale Karte + 1 Hop<br />
2 = Lokale Karte + 2 Hops<br />
und so weiter<br />
Default-Wert = 10<br />
<br />
<br />
===== ccchop =====<br />
{{Depends}}<br />
ccchop = hop<br />
<br />
Setzt den hop für '''nicht'''-cccam-reader<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Definiert den reshare-hop für CCcam-Reader<br />
<br />
cccreshare = hop<br />
= -1 # kein reshare<br />
= 0 # reshare für direct peer <br />
= 1 # reshare für direct peer und den nächsten Level<br />
= x # reshare für direct peer und die nächsten x (Anzahl) Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
===== cccwantemu =====<br />
{{Depends}}<br />
Anfrage, auch einen emu vom CCcam-Server zu erhalten.<br />
cccwantemu = 1 # ja<br />
= 0 # nein default<br />
<br />
<br />
===== ccckeepalive =====<br />
{{Depends}}<br />
Sendet eine "keepalive-message", um eine Verbindung zum remote CCCam-Server zu erhalten.<br />
ccckeepalive = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
===== cccreconnect =====<br />
{{Optional}}<br />
cccreconnect = timeout (ms)<br />
<br />
default = 12000 (ms)<br />
<br />
Wiederverbindung nach ECM-Request-Timeout in Millisekunden.<br />
Gilt nur für O-cccam reader, für cccam-ext Protokoll wird diese Zeit ignoriert.<br />
<br />
<br />
===== cccmindown =====<br />
{{Depends}}<br />
cccmindown = # Zahl<br />
= 0 default<br />
<br />
Filtert alle Reader mit hops, die kleiner sind als die eingesetzte Zahl<br />
<br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBOX läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
===== device =====<br />
{{Mandatory}}<br />
device = Komma-separierte Liste mit den Werten<br />
<br />
peer's IP oder Hostname<br />
peer's port<br />
<br />
Beispiel:<br />
device = 192.168.1.101,3820<br />
<br />
<br />
===== password =====<br />
{{Mandatory}}<br />
password = 4 hex bytes, 8 chars<br />
<br />
Peer Passwort<br />
<br />
Beispiel:<br />
password = A123BCDE<br />
<br />
===== gbox_reshare =====<br />
{{Optional}}<br />
Reshare-Level für lokale Karte(n), default = 2<br />
<br />
===== gbox_max_distance =====<br />
{{Optional}}<br />
gbox_max_distance = maximale Distanz zum Empfang von peer-cards, default = 2<br />
<br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional}}<br />
gbox_max_ecm_send = sende ecm zu maximal n peer cards, default = 3<br />
<br />
<br />
===== user =====<br />
{{Mandatory}}<br />
Benutzername (client) der oscam Gbox<br />
<br />
Beispiel<br />
user = gbox_client<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
'''Der user muss auch in der oscam.user als [account] eingetragen werden.'''<br />
<br />
'''Man sollte unbedingt für jeden gbox [reader] einen anderen user [account] benutzen.'''<br />
'''Nur dann sind die Peers im Log usw unterscheidbar.'''<br />
<br />
'''Unter [reader] und [account] sollten geeignete Filter gesetzt werden (services=, caid=, ident=), um Instabilitäten der GBOX durch<br />
'''Überfluten mit Karten zu vermeiden.'''<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.user&diff=13502
OSCam/en/Config/oscam.user
2019-01-19T19:50:53Z
<p>Felixka: /* pwd */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.user ==<br />
The user configuration file for OSCam contains user definitions. [account] sections in oscam.user are recurring (more than one account).<br />
<br />
=== [account] ===<br />
{{OSCamUserParameter}}<br />
<br />
==== user ====<br />
{{required}}<br />
<br />
account name<br />
<br />
Example:<br />
user = user1<br />
<br />
Default:<br />
user =<br />
<br />
==== pwd ====<br />
{{required}}<br />
<br />
password for account<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Gbox Protocol:''' pwd is not required<br />
<br />
Example:<br />
pwd = pwuser1<br />
<br />
Default:<br />
pwd =<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
description of user account (text) <br />
<br />
Описание аккаунта пользователя (текст)<br />
<br />
==== disabled ====<br />
{{Optional/en}}<br />
<br />
account disabled<br />
<br />
Beispiel:<br />
disabled = 0 # (account enabled)<br />
disabled = 1 # (account disabled)<br />
<br />
Default:<br />
disabled = 0<br />
<br />
==== hostname ====<br />
{{Optional/en}}<br />
host from which user connection is allowed<br />
<br />
Example:<br />
hostname = client.dyndns.org<br />
<br />
Default:<br />
hostname =<br />
<br />
==== expdate ====<br />
{{Optional/en}}<br />
<br />
expiration date for account<br />
<br />
Format:<br />
<year>-<month>-<day>|<year>/<month>/<day><br />
<br />
Example:<br />
expdate = 2001-11-21<br />
expdate = 2002/12/22<br />
<br />
Default:<br />
expdate = none<br />
<br />
==== allowedprotocols ====<br />
{{Optional/en}}<br />
<br />
allowedprotocols = [protocol1][,][protocol2][,][protocol3][,]...<br />
<br />
allowed protocols for user<br />
<br />
protocols<br />
camd33<br />
camd35<br />
cs357x<br />
cs378x<br />
newcamd<br />
cccam<br />
gbox<br />
radegast<br />
<br />
example<br />
allowedprotocols = cs357x,gbox # only cs357x and gbox protocols are allowed<br />
= [blank] # all protocols are allowed (default)<br />
<br />
==== allowedtimeframe ====<br />
{{Optional/en}}<br />
<br />
account enabled from - to for specified day(s)<br />
<br />
Format:<br />
DAY@HH:MM-HH:MM[,HH:MM-HH:MM][,HH:MM-HH:MM][;DAY@HH:MM-HH:MM[,HH:MM-HH:MM][,HH:MM-HH:MM]]<br />
where DAY=SUN,MON,TUE,WED,THU,FRI,SAT or ALL (for all possible days)<br />
<br />
comma (,) to separate times and semicolon(;) to separate the different days.<br />
You can use ALL@ if you want the same time frames for everyday.<br />
<br />
Day starts at 00:00 and end at 24:00, so to cover a full day use: DAY@00:00-24:00<br />
<br />
Example:<br />
allowedtimeframe = ALL@10:00-22:00;MON@00:00-02:00,02:45-04:37;FRI@00:00-10:00,22:00-24:00;SAT@00:00-24:00<br />
<br />
If you use: XXX@22:00-05:00 this will be turned into XXX@00:00-05:00,22:00-24:00<br><br />
ALL@ is always checked and used, so you can watch TV the whole day on FRIday in this exemple. There is no problem to overlap ALL@ in a day definition, like for SAT@ definition.<br />
<br />
Default:<br />
allowedtimeframe =<br />
<br />
==== uniq ====<br />
{{Optional/en}}<br />
<br />
Example:<br />
uniq = 0 # disabled, default<br />
uniq = 1 # only one connection per user is allowed<br />
uniq = 2 # set user to fake if source ip is different<br />
(e.g. for newcamd clients with different CAIDs and ports)<br />
uniq = 3 # only one connection per user, but only the last login will survive (old mpcs behavior)<br />
uniq = 4 # set user only to fake if source ip is different, but only the last login will survive<br />
<br />
Default:<br />
uniq = 0<br />
<br />
==== numusers ====<br />
{{Depends/en}}<br />
<br />
used only '''if anticascading''' is enabled!<br />
<br />
numusers = # quantity<br />
<br />
user per account<br />
<br />
Example:<br />
numusers = -1 # (global value from oscam.conf, default)<br />
numusers = 5 # (maximal 5 user)<br />
numusers = 0 # (anticascading disabled)<br />
<br />
==== penalty ====<br />
{{Depends/en}}<br />
<br />
used only if '''anticascading''' is enabled!<br />
<br />
level of penalty:<br />
'''penalty = -1''' # use value of [[OSCam/en/Config/oscam.conf#penalty|penalty]] defined in oscam.conf ('''default''')<br />
penalty = 0 # only logging<br />
penalty = 1 # send fake DWs<br />
penalty = 2 # ban user temporary<br />
penalty = 3 # send DWs with delay ([[OSCam/en/Config/oscam.conf#fakedelay|fakedelay]])<br />
<br />
==== fakedelay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7785:10/22/2012</span><br />
<br />
fakedelay = milli seconds or 0|-1<br />
<br />
se fake delay time individually for user<br />
<br />
0 = fake delay disabled<br />
-1 = fake delay of oscam.conf[global] (default)<br />
= fake delay in milli seconds for user<br />
<br />
==== failban ====<br />
{{Optional}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7772:10/21/2012</span><br />
<br />
mask for IP based blocking:<br />
<br />
failban = 0|2|4|8<br />
<br />
failban = 0 # ignore (default)<br />
failban = 2 # block IP address of a disabled account on connecting<br />
failban = 4 # block IP address of a sleeping account while sleeping comes up<br />
failban = 8 # block duplicate IP address<br />
<br /><br />
<br /><br />
<br />
==== acosc_max_active_sids ====<br />
{{Optional/en}}<br />
<br /><br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7940:05/20/2014</span><br /><br />
<br />
acosc_max_active_sids = count<br />
<br />
maximum active SIDs with anti-cascading over SID<br />
<br /><br />
0 = unlimited, default<br />
-1 = use global setting from oscam.conf [global]<br />
<br /><br />
<br /><br />
<br />
==== acosc_zap_limit ====<br />
{{Optional/en}}<br />
<br /><br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7940:05/20/2014</span><br />
<br />
acosc_zap_limit = count<br />
<br /><br />
zap-limit for anticascading over SID<br />
<br /><br />
0 = unlimited, default<br />
-1 = use global setting from oscam.conf.[global]<br />
<br /><br />
<br /><br />
==== acosc_penalty ====<br />
{{Optional/en}}<br />
<br /><br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7940:05/20/2014</span><br />
<br />
acosc_penalty = 0|1|2|3|-1<br />
<br /><br />
level of penalty with anti-cascading over SID<br />
<br /><br />
0 = only logging, default<br />
1 = send fake CW's<br />
2 = temporary user ban<br />
3 = send delayed CW's<br />
-1 = use global setting from oscam.conf [global]<br />
<br /><br />
<br /><br />
==== acosc_penalty_duration ====<br />
{{Optional/en}}<br />
<br /><br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7940:05/20/2014</span><br />
<br />
acosc_penalty_duration = seconds<br />
<br /><br />
penalty duration for anti-cascading over SID<br />
<br /><br />
0 = mone, default<br />
-1 = use global setting from oscam.conf[global]<br />
<br /><br />
<br /><br />
==== acosc_delay ====<br />
{{Optional/en}}<br />
<br /><br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7940:05/20/2014</span><br />
<br />
acosc_delay = milli-seconds<br />
<br /><br />
Dauer des delay für anti-cascading über SID<br />
<br /><br />
0 = none, default<br />
-1 = use global setting Oscam.conf[global]<br />
<br /><br />
<br /><br />
<br />
<br />
<br />
<br />
<br />
==== lb_nbest_readers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8642:05/10/2013</span><br />
<br />
lb_nbest_readers = count<br />
<br />
set count of best readers for load balancing<br />
<br />
-1 = use global lb_nbest_readers in oscam.conf<br />
1 = default<br />
<br />
==== lb_nbest_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8642:05/10/2013</span><br />
<br />
lb_nbest_percaid = CAID1:count1[,CAID2:count2]...<br />
<br />
set count of best readers per CAIDs for load balancing, wildcards CAIDs with two-digit CAIDs possible.<br />
default = none<br />
<br />
example<br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1<br />
(wildcards CAIDs 03xx and 04xx)<br />
<br />
==== preferlocalcards ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 10050:11/30/2014</span><br />
<br />
preferlocalcards = 0|-1|1|2<br />
<br />
-1 = global value from oscam.sonf[global] (default)<br />
0 = local SCs used like a remote reader<br />
1 = prefer call exchange based SCs<br />
2 = prefer local SCs<br />
<br />
<br />
<br />
==== cwc_disable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 10049:11/30/2014</span><br />
<br />
cwc_disable = 0|1<br />
<br />
1 = disable cw cycle check<br />
0 = default<br />
<br />
<br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6039:11/26/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.server!<br />
<br />
Identical cache exchange modes must be set on local OSCam user account and remote OSCam server!<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new ECMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= defaolt = 10 hops<br />
<br />
define maximum hops for cache exchange<br />
<br />
<br />
==== sleep ====<br />
{{Optional/en}}<br />
<br />
time waiting for inactive user in minutes<br />
<br />
Example:<br />
sleep = 5<br />
<br />
Default:<br />
sleep =<br />
<br />
==== sleepsend ====<br />
{{Optional/en}}<br />
0|255<br />
<br />
255 = '''OSCam client''' only: stopping requests until next zap,<br />
<br />
255 = '''camd 3.x''' only: stopping requests until restart of camd3 client<br />
<br />
Examples:<br />
sleepsend = 0<br />
sleepsend = 255<br />
<br />
Default:<br />
sleepsend =<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
switches suppress of CMD08<br />
<br />
suppresscmd08 = 0 # CMD08 for camd3 3.57x/3.78x clients '''enabled'''<br />
suppresscmd08 = 1 # CMD08 for camd3 3.57x/3.78x clients '''disabled'''<br />
<br />
Default:<br />
suppresscmd08 = 0<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<br />
disable keepalive between newcamd-server and client connection<br />
<br />
keepalive = 0 # disabled <br />
keepalive = 1 # enabled (default)<br />
<br />
==== umaxidle ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8929:09/25/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9801:07/17/2014</span><br />
<br />
umaxidle = seconds<br />
<br />
value for user being idle before disconnect. <br />
<br />
-1 = use clientmaxidle in [global]-section<br />
0 = idle disconnect disabled (default)<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== au ====<br />
{{Optional/en}}<br />
<br />
Format:<br />
label of reader[,label of reader]...|1<br />
<br />
AU settings:<br />
au = [label of reader] # sending EMMs to specified reader<br />
(security issue: clients can see SC data!)<br />
au = 1 # auto AU is sending EMMs to all readers<br />
(security issue: clients can see SC data!)<br />
Default:<br />
au = [blank] # none<br />
<br />
<br />
Sometimes only global emm's update '''same caid cards''':<br />
<br />
- check if you blocked unique/shared in READER Blockemm<br />
<br />
- don't use au = 1, use au = [label of reader]<br />
<br />
- if still troublesome use '''in house''' different user to update each card by [label of reader]<br />
<br />
example: <small>cd__nl</small> and <small>tv__vl</small> have a common provider: <small>m7 group sa</small> and share updates on shared channels.<br />
<br />
user 1: AU: <small>cd__nl</small>,sky_uk<br />
<br />
user 2: AU: <small>tv__vl</small><br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
user assingment to reader group. Valid 64 groups<br />
<br />
Format:<br />
group = 1....64[,1....64]....<br />
default = none<br />
<br />
==== betatunnel ====<br />
{{Optional/en}}<br />
<br />
define Betacrypt tunneling (max. see CS_MAXTUNTAB in globals.h). The ServiceID can also be used for wildcarded CAIDs.<br />
<br />
Format:<br />
<CAID>.<ServiceID>:<target CAID>[,<CAID>.<ServiceID>: <target CAID>]...<br />
<br />
Example:<br />
betatunnel = 0100.0001:0200,0300.0004:0500<br />
betatunnel = 0600.FFFF:0700<br />
<br />
Default:<br />
betatunnel =<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8591:01/04/2013</span><br />
<br />
<br />
emmreassembly = 0|1||2 <br />
<br />
EMM reassembly, should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling them instead of just sending them to OSCam for processing.<br />
<br />
0: disabled <br />
1: enabled for DVB API <br />
2: enabled (default)<br />
<br />
<br />
==== services ====<br />
{{Optional/en}}<br />
<br />
What services may use the User.? This requires a oscam.services be present. The logic here is as follows (in this order): <br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with '''!''') is applicable, the request is rejected. <br />
* If a positive service is applicable or there is no positive service, the request is allowed. <br />
* If none of the previous points, the request is rejected. <br />
This means that negative Services are only necessary in individual cases. Namely, exactly, then if you have a positive service, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels. <br />
<br />
Example: <br />
services = service1,!service2 # (client may receive service1, but not service2) <br />
services = [!]services <br />
<br />
Default: <br />
services =<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
user assingment to SC specific idents<br />
<br />
Format:<br />
<CAID>:<ident>[,<ident>,...][;<CAID>:<ident>[,<ident>,...]]...<br />
<br />
default = none<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
user [de]assingment to SC specific classes<br />
<br />
Format:<br />
[!]class[,[!]class]...<br />
<br />
Example:<br />
class = 01,02,!03,!04<br />
<br />
default = none<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
user assingment to SC specific ChID<br />
<br />
Format:<br />
chid = <CAID>:<ChID>[,<ChID>,...][;<CAID>:<ChID>[,<ChID>,...]]...<br />
= [blank] default<br />
<br />
==== monlevel ====<br />
{{Optional/en}}<br />
<br />
monitor level:<br />
monlevel = 0 # no access to monitor<br />
monlevel = 1 # only server and own procs<br />
monlevel = 2 # all procs, but viewing only, default<br />
monlevel = 3 # all procs, reload of oscam.user possible<br />
monlevel = 4 # complete access<br />
<br />
==== ccc ====<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
only if '''CCcam proxies or CCcam server''' are used!<br />
<br />
maximum hops limit for CCcam clients<br />
<br />
cccmaxhops = -1 # CCcam disbled for this user<br />
0 # local SCs only<br />
1 # local SCs + 1 hop<br />
2 # local SCs + 2 hops<br />
# and so on<br />
<br />
Default:<br />
cccmaxhops = 10 # local SC's + 10 hops<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8608:04/10/2013</span><br />
<br />
<br />
reshare level for CCcam clients<br />
<br />
Example:<br />
cccreshare = -1 # use [[OSCam/en/Config/oscam.conf#reshare|reshare]] level defined in oscam.conf - default<br />
= 0 # reshare for direct peer only<br />
= 1 # resharing for direct peer and next level<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccignorereshare =====<br />
{{Depends/en}}<br />
<br />
only if '''CCcam proxies or CCcam server''' are used!<br />
<br />
CCcam ignore reshare settings<br />
<br />
cccignorereshare = -1 # use ignore reshare level of oscam.conf [ccc] - default <br />
= 0 # use ignore reshare level of server<br />
= 1 # use ignore reshare level of reader or user<br />
<br />
===== cccstealth =====<br />
{{Depends/en}}<br />
<br />
cccstealth = -1|0|1<br />
<br />
-1 = # use CCcam stealth of oscam.conf [ccc] - default<br />
0 = # use extendet OSCam-CCcam-protocol<br />
1 = # behaviour like the original CCcam-protocol, no activate partner detection and extendet<br />
OSCam-CCcam-protocol, prevent other OSCam to detect the server as OSCam-server<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.user&diff=13501
OSCam/de/Config/oscam.user
2019-01-19T19:49:41Z
<p>Felixka: /* pwd */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.user''' ==<br />
Diese Datei enthält Userdefinitionen. Für jeden User muss ein Abschnitt erstellt werden.<br />
<br />
=== '''Account''' ===<br />
{{OSCamUserParameter}}<br />
<br />
==== user ====<br />
{{Mandatory}}<br />
Hier wird der Benutzername eingefügt. (Clientname)<br />
<br />
Beispiel:<br />
user = user1<br />
<br />
Default:<br />
user =<br />
<br />
<br />
==== pwd ====<br />
{{Mandatory}}<br />
Hier wird das Passwort festgelegt.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Gbox Protocol:''' pwd wird nicht benötigt<br />
<br />
Beispiel:<br />
pwd = pwuser1<br />
<br />
Default:<br />
pwd =<br />
<br />
==== description ====<br />
{{Optional}}<br />
Es kann eine Beschreibung des Users eingetragen werden<br />
<br />
'''Nicht zu verwechseln mit ''user und pwd''!''' Dient für '''zusätzliche''' Informationen über den user z.B. Örtlichkeit, Rechte usw.<br />
<br />
<br />
==== disabled ====<br />
{{Optional}}<br />
User sperren.<br />
<br />
Beispiel:<br />
disabled = 0 # (User ist aktiv)<br />
disabled = 1 # (User ist gesperrt)<br />
<br />
Default:<br />
disabled = 0<br />
<br />
<br />
==== hostname ====<br />
{{Optional}}<br />
Oscam akzeptiert nur Clientverbindungen des Users vom eingetragenen Host. IP oder DNS ist möglich.<br />
<br />
Beispiel:<br />
hostname = client.dyndns.org<br />
<br />
Default:<br />
hostname =<br />
<br />
<br />
==== expdate ====<br />
{{Optional}}<br />
Wie lange ist der User gültig.<br />
<br />
Beispiel:<br />
expdate = 2099-12-31 # (Gültig bis 31.12.2099)<br />
expdate = <year>-<month>-<day>|<year>/<month>/<day><br />
<br />
Default:<br />
expdate =<br />
<br />
<br />
==== allowedprotocols ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 5662:07/2011</span><br />
<br />
allowedprotocols = [protocol1][,][protocol2][,][protocol3][,]...<br />
<br />
Hier kann festgelegt werden, welche Protokolle der User benutzen darf. Die Zugriffsmöglichkeiten auf den Server können damit eingeschränkt werden!<br />
<br />
Mögliche Protokolle<br />
camd33<br />
camd35<br />
cs357x<br />
cs378x<br />
newcamd<br />
cccam<br />
gbox<br />
radegast<br />
<br />
Beispiel<br />
allowedprotocols = cs357x,gbox # Der User darf nur mit den Protokollen cs357x und gbox auf den Server zugreifen<br />
= [blank] # alle möglichen Protokolle sind erlaubt (default)<br />
<br />
<br />
==== allowedtimeframe ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 11356:02/09/2017</span><br />
<br />
Zeitspanne, in der der User (pro Tag) schauen darf.<br />
<br />
Format:<br />
DAY@HH:MM-HH:MM[,HH:MM-HH:MM][,HH:MM-HH:MM][;DAY@HH:MM-HH:MM[,HH:MM-HH:MM][,HH:MM-HH:MM]]<br />
wobei DAY=SUN,MON,TUE,WED,THU,FRI,SAT oder ALL (für alle Tage)<br />
<br />
Das Komma wird zur Trennung der möglichen mehreren Zeiten pro Tag, und das Semikolon zur Trennung der möglichen mehreren Tage benutzt.<br />
Wenn man eine erlaubte Zeitspanne für jeden Tag der Woche angeben möchte, nimmt man ALL@.<br />
Der Tag beginnt um 00:00 und endet um 24:00, also um den ganzen Tag anzugeben nimmt man DAY@00:00-24:00. Schreibt man: DAY@22:00-05:00, so wird dies zu DAY@00:00-05:00,22:00-24:00 umgewandelt.<br><br />
Es ist möglich bis zu 10 Zeitspannen pro Tag plus 10 Zeitspannen für ALL@ anzugeben.<br />
<br />
Beispiel:<br />
allowedtimeframe = ALL@10:00-22:00;MON@00:00-02:00,02:45-04:37;FRI@00:00-10:00,22:00-24:00;SAT@00:00-24:00<br />
<br />
ALL@ wird immer überprüft und benutzt, also kann der User in dem Beispiel am Freitag den ganzen Tag schauen. Ein Überlappen der Zeiten mit ALL@ und einem Tageseintrag ist kein Problem, wie im Beispiel am Samstag zu sehen ist.<br />
<br />
Default:<br />
allowedtimeframe =<br />
<br />
==== uniq ====<br />
{{Optional}}<br />
Mit Uniq wird geregelt, ob sich ein Client gleichzeitig nur einmal oder mehrmals anmelden darf<br />
<br />
Beispiel:<br />
uniq = 0 # (deaktiviert)<br />
uniq = 1 # (Nur eine Verbindung pro User ist erlaubt)<br />
uniq = 2 # (Setzt User auf Fake, wenn die IP unterschiedlich ist)<br />
uniq = 3 # (Erlaubt nur eine Verbindung pro User, die letzte Verbindung bleibt bestehen)<br />
uniq = 4 # (Setzt User auf Fake, wenn die IP unterschiedlich ist, aber der letzte Login bleibt erhalten)<br />
<br />
Default:<br />
uniq = 0<br />
<br />
<br />
==== numusers ====<br />
{{Depends}}<br />
Wird nur benötigt wenn Anti-Cascading aktiviert ist.<br />
Anzahl der zugelassenen User pro Account<br />
<br />
numusers = quantity<br />
<br />
Beispiel:<br />
numusers = 5 # (Maximal 5 User)<br />
numusers = 0 # (Anti-Cascading deaktiviert, default)<br />
<br />
<br />
==== penalty ====<br />
{{Depends}}<br />
Wird nur benötigt wenn Anti-Cascading aktiviert ist.<br />
Was passiert, wenn der Wert numuser überschritten wird.<br />
<br />
penalty = 0|1|2|3<br />
<br />
Beispiel:<br />
penalty = 0 # (Es wird nur geloggt)<br />
penalty = 1 # (Sendet Fake CW's)<br />
penalty = 2 # (deaktiviert temporär den Account)<br />
penalty = 3 # sendet delayed CW's<br />
penalty = -1 # es werden die Werte aus der oscam.conf benutzt (default)<br />
<br />
<br />
==== fakedelay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7785:10/22/2012</span><br />
<br />
fakedelay = Millisekunden oder 0|-1<br />
<br />
setzt die fakedelay-time individuell für den User<br />
<br />
0 = fakedelay disabled<br />
-1 = fakedelay aus der oscam.conf[global] verwenden (default)<br />
= Wert für den User in Millisekunden<br />
<br />
<br />
==== failban ====<br />
{{Optional}}<br />
Was passiert wenn der Wert numuser überschritten wird.<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7772:10/21/2012</span><br />
<br />
failban = 0|2|4|8<br />
<br />
failban = 0 # ignoriert (default)<br />
failban = 2 # Blockt die IP wenn sich ein deaktivierter Client verbindet<br />
failban = 4 # Blockt die IP eines schlafenden Accounts während des Schlafes<br />
failban = 8 # Blockt duplizierte IP<br />
<br />
<br />
==== acosc_max_active_sids ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7940:05/20/2014</span><br /><br />
<br />
acosc_max_active_sids = Anzahl<br />
<br />
Maximale Zahl activer SIDs mit anti-cascading über SID<br />
<br />
0 = unbegrenzt, default<br />
-1 = benutze die Einstellungen aus oscam.conf [global]<br />
<br />
<br />
==== acosc_zap_limit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7940:05/20/2014</span><br />
<br />
acosc_zap_limit = Anzahl<br />
<br />
Zap-Limit für anti-cascading über SID<br />
<br />
0 = unbegrenzt, default<br />
-1 = benutze die Einstellungen aus oscam.conf. [global]<br />
<br />
<br />
==== acosc_penalty ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7940:05/20/2014</span><br />
<br />
acosc_penalty = 0|1|2|3|-1<br />
<br />
Penalty-Level für anti-cascading über SID<br />
<br />
0 = nur loggen, default<br />
1 = sende fake CW's<br />
2 = vorübergehendes Bannen des Users<br />
3 = sende verzögerte CW's<br />
-1 = benutze die Einstellungen aus oscam.conf [global]<br />
<br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7940:05/20/2014</span><br />
<br />
acosc_penalty_duration = Sekunden<br />
<br />
Dauer der acosc_penalty für anti-cascading über SID<br />
<br />
0 = keine, default<br />
-1 = benutze die Einstellungen aus Oscam.conf [global]<br />
<br />
<br />
==== acosc_delay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 7940:05/20/2014</span><br />
<br />
acosc_delay = Millisekunden<br />
<br />
Dauer des delay für anti-cascading über SID<br />
<br />
0 = kein, default<br />
-1 = benutze die Einstellungen aus Oscam.conf [global]<br />
<br />
<br />
==== lb_nbest_readers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8642:05/10/2013</span><br />
<br />
ln_nbest_readers = Anzahl<br />
<br />
setzt die Anzahl der besten Reader für das Loadbalancing. <br />
-1 = benutze den Eintrag unter oscam-conf[global] für diesen Parameter<br />
1 = default<br />
<br />
<br />
==== lb_nbest_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8642:05/10/2013</span><br />
<br />
lb_nbest_percaid = CAID1:count1[,CAID2:count2]...<br />
<br />
setzt die Anzahl der besten reader pro CAID für das Loadbalancing. Wildcards CAID's mit 2-digit CAIDs sind möglich.<br />
<br />
Beispiel<br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1<br />
(Wildcards CAIDs 03xx und 04xx)<br />
<br />
<br />
==== preferlocalcards ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 10050:11/30/2014</span><br />
<br />
preferlocalcards = 0|-1|1|2<br />
<br />
-1 = es werden die Werte aus oscam.conf[global] verwendet (default)<br />
0 = lokale Karten werden wie ein remote Reader verwendet<br />
1 = verwende cache exchange basierte Karten<br />
2 = verwende lokale Karten<br />
<br />
<br />
==== cwc_disable ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn 10049:11/30/2014</span><br />
<br />
cwc_disable = 0|1<br />
<br />
1 = disable cw cycle check<br />
0 = default<br />
<br />
<br />
==== cacheex ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6039:11/26/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode für camd 3.5x und CCcam Protokolle<br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
für camd 3.5x und CCcam Protokolle<br />
<br />
Identische cache exchange modes müssen bei local OSCam user account und remote OSCam Readern gesetzt sein!<br />
<br />
[[Datei:MessageS.png|text-bottom]]'''Ein ausführliches How-To findet man hier [[Streamboard-Post:406230|Streamboard-Post]]'''<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam A erhält eine ECM Anfrage, reader1 sendet diese Anfrage an OSCam B,<br />
<br />
OSCam B prüft seinen cache:<br />
* im cache wird nichts gefunden: OSCam B sendet: NOK<br />
* im cache wird etwas gefunden; OSCam B sendet: OK+CW<br />
* im cache wird nichts gefunden aber es wird eine anstehende Anfrage festgestellt: ''cacheexwaittime'' in oscam.conf [global] wird abgewartet und dann erneut geprüft. OSCam B fragt nicht mehr nach neuen EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 2<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 2<br />
<br />
Wenn OSCam B ein CW erhält, wird es auf OSCam A geschoben. Der Reader hat normale Funktionen und kann ECMs anfragen.<br />
* Problem: OSCAM kann nur dann CW's auf OSCam A schieben, wenn OSCam A verbunden ist<br />
* Problem oder feature?: OSCam A kann ECMs von OSCam B anfragen<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 ist gesetzt auf cacheex = 3<br />
<br />
Wenn OSCam A ein CW erhält, wird dies auf OSCam B geschoben. OSCam A fragt nicht mehr nach neuen ECMs<br />
<br />
CW-flow = A ---> B<br />
<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = Anzahl der hops<br />
= default = 10 hops<br />
<br />
definiert das maximum an hops für cache exchange<br />
<br />
<br />
==== sleep ====<br />
{{Optional}}<br />
Ein User wird automatisch "inaktiviert", wenn dieser innerhalb der eingestellten "sleep"-Zeit ECMs auf ein und demselben Sender anfordert. Der User kann sich selbst wieder "aktivieren", indem er einfach den Sender wechselt. Nach einem Senderwechsel wird der "sleep"-Timer wieder zurückgesetzt.<br />
<br />
Beispiel - Angaben in Minuten:<br />
sleep = 240 # 4 Stunden<br />
<br />
Default:<br />
sleep =<br />
<br />
<br />
==== sleepsend ====<br />
{{Optional}}<br />
Wenn der "sleep"-Timer abgelaufen ist, sendet der Client dennoch weiterhin Anfragen, die OSCam mit "sleeping" beantwortet und loggt. Um diese Anfragen abzustellen, kann "sleepsend" genutzt werden.<br />
<br />
"sleepsend" wird nur von einigen SoftCAMs unterstützt und hat folgende Auswirkungen:<br />
* OSCam: Nur OSCam Clients mit Protokoll "Camd 3.x" oder CCcam (ab Build 5671)<br />
** Stoppt nach Ablauf der unter "sleep" eingestellten Zeit weitere Anfragen, bis der Client einmal Umschaltet<br />
* Camd 3.x:<br />
** Stoppt nach Ablauf der unter "sleep" eingestellten Zeit weitere Anfragen, bis Camd 3.x neugestartet wird<br />
<br />
Beispiel:<br />
sleepsend = 255 # aktiviert<br />
<br />
Default:<br />
sleepsend =<br />
<br />
<br />
==== suppresscmd08 ====<br />
{{Optional}}<br />
Nur wenn als Protokoll camd3|3.57x|3.78x verwendet wird. Das CMD08 ist ein Command, welches dem Client mitteilt, dass die Anfrage unerwünscht ist (rejected). Camd3 und Oscam als Client stellen auf dieses Command hin die Anfragen für diesen Service an den Server ein. Sollte der Wert beim User nicht gesetzt sein, gilt der globale Wert aus der oscam.conf. Das Command kann mit dem undokumentierten Parameter sleepsend=0|255 ergänzt werden (CMD08 senden bei status 'sleep').<br />
<br />
'''Zur Beachtung:''' Camd3 clients sperren die Anfrage bis zum Neustart. Oscam Clients sperren die Anfrage bis zum nächsten Zap. Sleepsend=255 sollte also nur bei Oscam Clients verwendet werden da ein Camd3 Client nach einem Sleepstatus einen Neustart bräuchte um diesen Service wieder anzufragen.<br />
<br />
Beispiel:<br />
suppresscmd08 = 0 # (aktiviert)<br />
suppresscmd08 = 1 # (deaktiviert)<br />
<br />
Default:<br />
suppresscmd08 = 0<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
Die Verbindung zwischen Newcamd-Server und Client wird aufrechterhalten<br />
<br />
Beispiel:<br />
keepalive = 0 # (deaktiviert)<br />
keepalive = 1 # (aktiviert)<br />
<br />
Default:<br />
keepalive = 1<br />
<br />
<br />
==== umaxidle ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8929:09/25/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 9801:07/17/2014</span><br />
<br />
umaxidle = in Sekunden<br />
<br />
Zeitraum nach dem ein im idle befindlicher user getrennt wird.<br />
<br />
-1 = verwende Parameter ''clientmaxidle'' in der [global]-section<br />
0 = idle disconnect ist ausgeschaltet (default)<br />
<br />
<br />
==== caid ====<br />
{{Optional}}<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
definiert und mapped CAIDs für Reader<br />
<br />
Beispiele:<br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut für das Beispiel oben)<br />
default: alle CAIDs mit der Maske FFFF<br />
<br />
<br />
==== au ====<br />
{{Optional}}<br />
Hier wird dem User erlaubt, EMM's an alle, eine bestimmte, oder mehrere reader zu schicken.<br />
<br />
Beispiel:<br />
au = 1<br />
au = label_of_reader # (label_of_reader wird in der oscam.server konfiguriert)<br />
au = label_of_reader,label_of_reader # (multiple readerliste ab build >= #4617)<br />
<br />
Default:<br />
au = [blank] # none<br />
<br />
<br />
==== group ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6103:12/21/2011</span><br />
<br />
Jeder User muss in einer oder mehrere Gruppen eingetragen sein. Damit lässt sich dann bestimmen, auf welche Reader, sofern mehrere vorhanden sind, dieser Client Zugriff haben soll. Zulässige Gruppen = 64.<br />
<br />
group = 1....64[,1....64]....<br />
default = kein Eintrag<br />
<br />
Beispiel:<br />
group = 1 # (User ist in Gruppe 1)<br />
group = 1,2 # (User ist in Gruppe 1 + 2)<br />
<br />
<br />
==== betatunnel ====<br />
{{Optional}}<br />
Der Betatunnel dient zum Mappen (Umhängen) von Sky- und KD-CAIDs, sodass z.B. 1833'er-Anfragen über 1702 beantwortet werden können.<br />
Notwendig ist dieses Mapping eigentlich nur bei HD-Kanälen, aber es lassen sich auch alle anderen Kanäle damit "umhängen".<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''Vor- und Nachteile eines kompletten und eines aufgeschlüsselten Mappings:'''<br />
* Bei einem '''kompletten Mapping''' "''1833.FFFF:1702''" werden alle SIDs (Programme) übersetzt. Dies hat den '''Vorteil''', dass der Client auch bei nicht HD-Sendern sofort beantwortet wird und keinen weiteren Server anfragen muss. '''Nachteil''', ein komplettes Mapping ist nicht so schnell wie ein aufgeschlüsseltes und die Anfragen benötigen 100-200ms mehr.<br />
* Ein '''aufgeschlüsseltes Mapping''' hat "nur" den '''Vorteil''', dass die Anfrage schneller beantwortet werden kann. '''Nachteil''', Du setzt eine "beschnittene" Karte ins Share, die nur die im Betatunnel definierten Programme umhängt, obwohl sie ggf. "mehr" kann.<br />
<br />
Die Meinungen, was ist besser und was nicht, unterscheiden sich sehr. Entscheide selbst, was das Beste für dich ist.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
* Wenn Du den Betatunnel einsetzt und zugleich '''Services''' verwendest, musst Du auch die '''oscam.services''' '''anpassen''', z.B. caid=1702,1833 für SAT und/oder ProvIDs (Ident) sowie SRVIDs, falls welche hinzukommen.<br />
* Ab OSCam Revision #8860 sind maximal 100 Mappings möglich, von #6092 bis #8859 max. 50, von #4347 bis #6091 max. 20 und bei vorherigen Versionen nur 16.<br />
* Eintragungen in der oscam.conf, [global] [[streamboard:wiki/OSCam/de/Config/oscam.conf#lb_auto_betatunnel|lb_auto_betatunnel und lb_auto_betatunnel_mode]], werden durch die Verwendung eines Betatunnel-Eintrages in der oscam.user '''überschrieben/ersetzt''', wenn Loadbalancing ebenfalls verwendet wird ([[streamboard:wiki/OSCam/de/Config/oscam.conf#lb_mode|lb_mode = 1 bis n]]).<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''Weitere Informationen:'''<br />
* Es tut nicht weh, den Betatunnel bei allen Usern einzusetzen, wenn Du eine davon betroffene Karte besitzt.<br />
* CCcam-Clients tunneln 1833 von Haus aus (nicht 1834!), sprich hier wäre es nicht nötig, aber es tut auch hier nicht weh.<br />
* Setze ggf. auch Prioritäten Deiner Clients, z.B. ''1702'' vor ''1833''.<br />
<br />
Beispiele:<br />
# betatunnel = <CAID>.<ServiceID>:<target CAID><br />
#<br />
# Sky, Mapping aller 1833'er-Anfragen auf CAID 1702...<br />
betatunnel = 1833.FFFF:1702<br />
#<br />
# KD, Mapping aller 1834'er-Anfragen auf CAID 1722...<br />
betatunnel = 1834.FFFF:1722<br />
#<br />
# Sky, es werden NUR die HD-Kanäle gemapped...<br />
betatunnel = 1833.0082:1702,1833.006F:1702,1833.0077:1702,1833.0084:1702,1833.0071:1702,1833.0070:1702,1833.0075:1702,1833.006A:1702,1833.006B:1702,1833.007C:1702,1833.0081:1702,1833.0072:1702,1833.0083:1702<br />
<br />
Default:<br />
betatunnel =<br />
<br />
<br />
==== emmreassembly ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8591:04/01/2013</span><br />
<br />
emmreassembly = 0|1|2<br />
<br />
0 = schaltet Neuaufbau von EMM aus<br />
1 = schaltet Neuaufbau von EMM '''für DVB API''' ein<br />
2 = schaltet Neuaufbau von EMM ein (default)<br />
<br />
Sollte bei '''Viaccess und Cryptoworks Readern''' gesetzt werden, wenn der Client, der für das Senden von EMMs benutzt wird, die EMMs neu aufbaut anstelle sie an OScam zur Bearbeitung zu senden.<br />
<br />
<br />
==== services ====<br />
{{Optional}}<br />
Welche Services darf der User nutzen. Hierzu muss eine oscam.services vorhanden sein. Die Logik ist hier folgendermaßen (in der angegebenen Reihenfolge):<br />
* Wenn das Feld leer ist (oder ungültig) wird die Anfrage erlaubt.<br />
* Wenn ein negativer Service (also solche mit "!") zutreffend ist, so wird die Anfrage abgewiesen.<br />
* Wenn ein positiver Service zutreffend ist oder es gar keinen positiven Service gibt, so wird die Anfrage erlaubt.<br />
* Wenn keiner der vorigen Punkte zutrifft, so wird die Anfrage abgewiesen.<br />
Dies bedeutet, dass negative Services nur in Einzelfällen nötig sind. Nämlich genau dann, wenn man positive Services hat, davon aber wieder einige ausnehmen will. Dies wird nicht empfohlen, da es hier schnell zu Fehlkonfigurationen kommt. Stattdessen sollte ein zusätzlicher Service angelegt werden, der alle entsprechenden Sender enthält.<br />
<br />
Beispiel:<br />
services = service1,!service2 # (Client darf service1 empfangen aber nicht service2)<br />
services = [!]services<br />
<br />
Default:<br />
services =<br />
<br />
<br />
==== ident ====<br />
{{Optional}}<br />
ident = <CAID>:<ident>[,<ident>,...][;<CAID>:<ident>[,<ident>,...]]...<br />
<br />
Nutzeranweisungern für kartenspezifische idents <br />
<br />
default:none<br />
<br />
<br />
==== class ====<br />
{{Optional}}<br />
class = [!]class[,[!]class]...<br />
<br />
Nutzerfestlegungen für kartenspezifische classes <br />
<br />
default = none<br />
<br />
Beispiel:<br />
class = 01,02,!03,!04<br />
<br />
<br />
==== chid ====<br />
{{Optional}}<br />
chid = <CAID>:<ChID>[,<ChID>,...][;<CAID>:<ChID>[,<ChID>,...]]...<br />
<br />
Nutzerfestlegungen für kartenspezifische CHID's<br />
<br />
default:none<br />
<br />
<br />
==== monlevel ====<br />
{{Optional}}<br />
Der Monitorlevel gibt dem Client die Möglichkeit sich auf die Monitorschnittstelle des Servers zu verbinden.<br />
Der Monitor wird in der oscam.conf konfiguriert.<br />
<br />
Beispiel:<br />
monlevel = 0 # (kein Zugriff auf den Monitor)<br />
monlevel = 1 # (nur der Server und der eigene Prozess)<br />
monlevel = 2 # (alle Prozesse aber nur anschauen)<br />
monlevel = 3 # (alle Prozesse und neuladen der oscam.user)<br />
monlevel = 4 # (Vollzugriff)<br />
<br />
Default:<br />
monlevel = 2<br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccmaxhops =====<br />
{{Depends}}<br />
Nur wenn CCcam Proxies vorhanden sind oder ein CCcam Server verwendet wird.<br />
<br />
Maximale hops die dem User erlaubt sind.<br />
<br />
cccmaxhops = -1 # CCcam für diesen user ausgeschaltet<br />
0 # Nur lokale Karten<br />
1 # Lokale Karten und 1 hop<br />
2 # Lokale Karten und 2 hops<br />
# und so weiter<br />
<br />
Default:<br />
cccmaxhops = 10<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8608:04/10/2013</span><br />
<br />
Reshare level für CCcam-Client<br />
<br />
cccreshare = -1 # benutze den reshare-level der oscam.conf [ccc] - default<br />
= 0 # Reshare nur für direct peer<br />
= 1 # Reshare für direct peer und nächsten Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
===== cccignorereshare =====<br />
{{Depends}}<br />
Nur wenn CCcam Proxies vorhanden sind oder ein CCcam Server verwendet wird.<br />
<br />
Einstellung für CCcam-Ignore-Reshare = -1|0|1<br />
<br />
cccignorereshare = -1 # benutze den ignorereshare-level der oscam.conf [ccc] - default <br />
= 0 # benutze den ignorereshare-level des Servers<br />
= 1 # benutze den ignorereshare-level des Readers oder Users<br />
<br />
<br />
===== cccstealth =====<br />
{{Depends}}<br />
cccstealth = -1|0|1<br />
<br />
-1 = benutze CCcam-stealth der oscam.conf [ccc] - default<br />
0 = benutze das extendet OSCam-CCcam-Protokoll<br />
1 = verhält sich ähnlich wie das original CCcam-Protokoll, es werden keine aktiven Partner dargestellt.<br />
Andere OScam's werden davor geschützt, dass der Server als OSCam-Server erkannt wird.<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.user&diff=13500
OSCam/en/Config/oscam.user
2019-01-19T19:43:36Z
<p>Felixka: /* pwd */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.user ==<br />
The user configuration file for OSCam contains user definitions. [account] sections in oscam.user are recurring (more than one account).<br />
<br />
=== [account] ===<br />
{{OSCamUserParameter}}<br />
<br />
==== user ====<br />
{{required}}<br />
<br />
account name<br />
<br />
Example:<br />
user = user1<br />
<br />
Default:<br />
user =<br />
<br />
==== pwd ====<br />
{{required}}<br />
<br />
password for account<br />
<br />
not required for protocol gbox<br />
<br />
Example:<br />
pwd = pwuser1<br />
<br />
Default:<br />
pwd =<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
description of user account (text) <br />
<br />
Описание аккаунта пользователя (текст)<br />
<br />
==== disabled ====<br />
{{Optional/en}}<br />
<br />
account disabled<br />
<br />
Beispiel:<br />
disabled = 0 # (account enabled)<br />
disabled = 1 # (account disabled)<br />
<br />
Default:<br />
disabled = 0<br />
<br />
==== hostname ====<br />
{{Optional/en}}<br />
host from which user connection is allowed<br />
<br />
Example:<br />
hostname = client.dyndns.org<br />
<br />
Default:<br />
hostname =<br />
<br />
==== expdate ====<br />
{{Optional/en}}<br />
<br />
expiration date for account<br />
<br />
Format:<br />
<year>-<month>-<day>|<year>/<month>/<day><br />
<br />
Example:<br />
expdate = 2001-11-21<br />
expdate = 2002/12/22<br />
<br />
Default:<br />
expdate = none<br />
<br />
==== allowedprotocols ====<br />
{{Optional/en}}<br />
<br />
allowedprotocols = [protocol1][,][protocol2][,][protocol3][,]...<br />
<br />
allowed protocols for user<br />
<br />
protocols<br />
camd33<br />
camd35<br />
cs357x<br />
cs378x<br />
newcamd<br />
cccam<br />
gbox<br />
radegast<br />
<br />
example<br />
allowedprotocols = cs357x,gbox # only cs357x and gbox protocols are allowed<br />
= [blank] # all protocols are allowed (default)<br />
<br />
==== allowedtimeframe ====<br />
{{Optional/en}}<br />
<br />
account enabled from - to for specified day(s)<br />
<br />
Format:<br />
DAY@HH:MM-HH:MM[,HH:MM-HH:MM][,HH:MM-HH:MM][;DAY@HH:MM-HH:MM[,HH:MM-HH:MM][,HH:MM-HH:MM]]<br />
where DAY=SUN,MON,TUE,WED,THU,FRI,SAT or ALL (for all possible days)<br />
<br />
comma (,) to separate times and semicolon(;) to separate the different days.<br />
You can use ALL@ if you want the same time frames for everyday.<br />
<br />
Day starts at 00:00 and end at 24:00, so to cover a full day use: DAY@00:00-24:00<br />
<br />
Example:<br />
allowedtimeframe = ALL@10:00-22:00;MON@00:00-02:00,02:45-04:37;FRI@00:00-10:00,22:00-24:00;SAT@00:00-24:00<br />
<br />
If you use: XXX@22:00-05:00 this will be turned into XXX@00:00-05:00,22:00-24:00<br><br />
ALL@ is always checked and used, so you can watch TV the whole day on FRIday in this exemple. There is no problem to overlap ALL@ in a day definition, like for SAT@ definition.<br />
<br />
Default:<br />
allowedtimeframe =<br />
<br />
==== uniq ====<br />
{{Optional/en}}<br />
<br />
Example:<br />
uniq = 0 # disabled, default<br />
uniq = 1 # only one connection per user is allowed<br />
uniq = 2 # set user to fake if source ip is different<br />
(e.g. for newcamd clients with different CAIDs and ports)<br />
uniq = 3 # only one connection per user, but only the last login will survive (old mpcs behavior)<br />
uniq = 4 # set user only to fake if source ip is different, but only the last login will survive<br />
<br />
Default:<br />
uniq = 0<br />
<br />
==== numusers ====<br />
{{Depends/en}}<br />
<br />
used only '''if anticascading''' is enabled!<br />
<br />
numusers = # quantity<br />
<br />
user per account<br />
<br />
Example:<br />
numusers = -1 # (global value from oscam.conf, default)<br />
numusers = 5 # (maximal 5 user)<br />
numusers = 0 # (anticascading disabled)<br />
<br />
==== penalty ====<br />
{{Depends/en}}<br />
<br />
used only if '''anticascading''' is enabled!<br />
<br />
level of penalty:<br />
'''penalty = -1''' # use value of [[OSCam/en/Config/oscam.conf#penalty|penalty]] defined in oscam.conf ('''default''')<br />
penalty = 0 # only logging<br />
penalty = 1 # send fake DWs<br />
penalty = 2 # ban user temporary<br />
penalty = 3 # send DWs with delay ([[OSCam/en/Config/oscam.conf#fakedelay|fakedelay]])<br />
<br />
==== fakedelay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7785:10/22/2012</span><br />
<br />
fakedelay = milli seconds or 0|-1<br />
<br />
se fake delay time individually for user<br />
<br />
0 = fake delay disabled<br />
-1 = fake delay of oscam.conf[global] (default)<br />
= fake delay in milli seconds for user<br />
<br />
==== failban ====<br />
{{Optional}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7772:10/21/2012</span><br />
<br />
mask for IP based blocking:<br />
<br />
failban = 0|2|4|8<br />
<br />
failban = 0 # ignore (default)<br />
failban = 2 # block IP address of a disabled account on connecting<br />
failban = 4 # block IP address of a sleeping account while sleeping comes up<br />
failban = 8 # block duplicate IP address<br />
<br /><br />
<br /><br />
<br />
==== acosc_max_active_sids ====<br />
{{Optional/en}}<br />
<br /><br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7940:05/20/2014</span><br /><br />
<br />
acosc_max_active_sids = count<br />
<br />
maximum active SIDs with anti-cascading over SID<br />
<br /><br />
0 = unlimited, default<br />
-1 = use global setting from oscam.conf [global]<br />
<br /><br />
<br /><br />
<br />
==== acosc_zap_limit ====<br />
{{Optional/en}}<br />
<br /><br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7940:05/20/2014</span><br />
<br />
acosc_zap_limit = count<br />
<br /><br />
zap-limit for anticascading over SID<br />
<br /><br />
0 = unlimited, default<br />
-1 = use global setting from oscam.conf.[global]<br />
<br /><br />
<br /><br />
==== acosc_penalty ====<br />
{{Optional/en}}<br />
<br /><br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7940:05/20/2014</span><br />
<br />
acosc_penalty = 0|1|2|3|-1<br />
<br /><br />
level of penalty with anti-cascading over SID<br />
<br /><br />
0 = only logging, default<br />
1 = send fake CW's<br />
2 = temporary user ban<br />
3 = send delayed CW's<br />
-1 = use global setting from oscam.conf [global]<br />
<br /><br />
<br /><br />
==== acosc_penalty_duration ====<br />
{{Optional/en}}<br />
<br /><br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7940:05/20/2014</span><br />
<br />
acosc_penalty_duration = seconds<br />
<br /><br />
penalty duration for anti-cascading over SID<br />
<br /><br />
0 = mone, default<br />
-1 = use global setting from oscam.conf[global]<br />
<br /><br />
<br /><br />
==== acosc_delay ====<br />
{{Optional/en}}<br />
<br /><br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7940:05/20/2014</span><br />
<br />
acosc_delay = milli-seconds<br />
<br /><br />
Dauer des delay für anti-cascading über SID<br />
<br /><br />
0 = none, default<br />
-1 = use global setting Oscam.conf[global]<br />
<br /><br />
<br /><br />
<br />
<br />
<br />
<br />
<br />
==== lb_nbest_readers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8642:05/10/2013</span><br />
<br />
lb_nbest_readers = count<br />
<br />
set count of best readers for load balancing<br />
<br />
-1 = use global lb_nbest_readers in oscam.conf<br />
1 = default<br />
<br />
==== lb_nbest_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8642:05/10/2013</span><br />
<br />
lb_nbest_percaid = CAID1:count1[,CAID2:count2]...<br />
<br />
set count of best readers per CAIDs for load balancing, wildcards CAIDs with two-digit CAIDs possible.<br />
default = none<br />
<br />
example<br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1<br />
(wildcards CAIDs 03xx and 04xx)<br />
<br />
==== preferlocalcards ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 10050:11/30/2014</span><br />
<br />
preferlocalcards = 0|-1|1|2<br />
<br />
-1 = global value from oscam.sonf[global] (default)<br />
0 = local SCs used like a remote reader<br />
1 = prefer call exchange based SCs<br />
2 = prefer local SCs<br />
<br />
<br />
<br />
==== cwc_disable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 10049:11/30/2014</span><br />
<br />
cwc_disable = 0|1<br />
<br />
1 = disable cw cycle check<br />
0 = default<br />
<br />
<br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6039:11/26/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.server!<br />
<br />
Identical cache exchange modes must be set on local OSCam user account and remote OSCam server!<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new ECMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= defaolt = 10 hops<br />
<br />
define maximum hops for cache exchange<br />
<br />
<br />
==== sleep ====<br />
{{Optional/en}}<br />
<br />
time waiting for inactive user in minutes<br />
<br />
Example:<br />
sleep = 5<br />
<br />
Default:<br />
sleep =<br />
<br />
==== sleepsend ====<br />
{{Optional/en}}<br />
0|255<br />
<br />
255 = '''OSCam client''' only: stopping requests until next zap,<br />
<br />
255 = '''camd 3.x''' only: stopping requests until restart of camd3 client<br />
<br />
Examples:<br />
sleepsend = 0<br />
sleepsend = 255<br />
<br />
Default:<br />
sleepsend =<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
switches suppress of CMD08<br />
<br />
suppresscmd08 = 0 # CMD08 for camd3 3.57x/3.78x clients '''enabled'''<br />
suppresscmd08 = 1 # CMD08 for camd3 3.57x/3.78x clients '''disabled'''<br />
<br />
Default:<br />
suppresscmd08 = 0<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<br />
disable keepalive between newcamd-server and client connection<br />
<br />
keepalive = 0 # disabled <br />
keepalive = 1 # enabled (default)<br />
<br />
==== umaxidle ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8929:09/25/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9801:07/17/2014</span><br />
<br />
umaxidle = seconds<br />
<br />
value for user being idle before disconnect. <br />
<br />
-1 = use clientmaxidle in [global]-section<br />
0 = idle disconnect disabled (default)<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== au ====<br />
{{Optional/en}}<br />
<br />
Format:<br />
label of reader[,label of reader]...|1<br />
<br />
AU settings:<br />
au = [label of reader] # sending EMMs to specified reader<br />
(security issue: clients can see SC data!)<br />
au = 1 # auto AU is sending EMMs to all readers<br />
(security issue: clients can see SC data!)<br />
Default:<br />
au = [blank] # none<br />
<br />
<br />
Sometimes only global emm's update '''same caid cards''':<br />
<br />
- check if you blocked unique/shared in READER Blockemm<br />
<br />
- don't use au = 1, use au = [label of reader]<br />
<br />
- if still troublesome use '''in house''' different user to update each card by [label of reader]<br />
<br />
example: <small>cd__nl</small> and <small>tv__vl</small> have a common provider: <small>m7 group sa</small> and share updates on shared channels.<br />
<br />
user 1: AU: <small>cd__nl</small>,sky_uk<br />
<br />
user 2: AU: <small>tv__vl</small><br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
user assingment to reader group. Valid 64 groups<br />
<br />
Format:<br />
group = 1....64[,1....64]....<br />
default = none<br />
<br />
==== betatunnel ====<br />
{{Optional/en}}<br />
<br />
define Betacrypt tunneling (max. see CS_MAXTUNTAB in globals.h). The ServiceID can also be used for wildcarded CAIDs.<br />
<br />
Format:<br />
<CAID>.<ServiceID>:<target CAID>[,<CAID>.<ServiceID>: <target CAID>]...<br />
<br />
Example:<br />
betatunnel = 0100.0001:0200,0300.0004:0500<br />
betatunnel = 0600.FFFF:0700<br />
<br />
Default:<br />
betatunnel =<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8591:01/04/2013</span><br />
<br />
<br />
emmreassembly = 0|1||2 <br />
<br />
EMM reassembly, should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling them instead of just sending them to OSCam for processing.<br />
<br />
0: disabled <br />
1: enabled for DVB API <br />
2: enabled (default)<br />
<br />
<br />
==== services ====<br />
{{Optional/en}}<br />
<br />
What services may use the User.? This requires a oscam.services be present. The logic here is as follows (in this order): <br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with '''!''') is applicable, the request is rejected. <br />
* If a positive service is applicable or there is no positive service, the request is allowed. <br />
* If none of the previous points, the request is rejected. <br />
This means that negative Services are only necessary in individual cases. Namely, exactly, then if you have a positive service, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels. <br />
<br />
Example: <br />
services = service1,!service2 # (client may receive service1, but not service2) <br />
services = [!]services <br />
<br />
Default: <br />
services =<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
user assingment to SC specific idents<br />
<br />
Format:<br />
<CAID>:<ident>[,<ident>,...][;<CAID>:<ident>[,<ident>,...]]...<br />
<br />
default = none<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
user [de]assingment to SC specific classes<br />
<br />
Format:<br />
[!]class[,[!]class]...<br />
<br />
Example:<br />
class = 01,02,!03,!04<br />
<br />
default = none<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
user assingment to SC specific ChID<br />
<br />
Format:<br />
chid = <CAID>:<ChID>[,<ChID>,...][;<CAID>:<ChID>[,<ChID>,...]]...<br />
= [blank] default<br />
<br />
==== monlevel ====<br />
{{Optional/en}}<br />
<br />
monitor level:<br />
monlevel = 0 # no access to monitor<br />
monlevel = 1 # only server and own procs<br />
monlevel = 2 # all procs, but viewing only, default<br />
monlevel = 3 # all procs, reload of oscam.user possible<br />
monlevel = 4 # complete access<br />
<br />
==== ccc ====<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
only if '''CCcam proxies or CCcam server''' are used!<br />
<br />
maximum hops limit for CCcam clients<br />
<br />
cccmaxhops = -1 # CCcam disbled for this user<br />
0 # local SCs only<br />
1 # local SCs + 1 hop<br />
2 # local SCs + 2 hops<br />
# and so on<br />
<br />
Default:<br />
cccmaxhops = 10 # local SC's + 10 hops<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8608:04/10/2013</span><br />
<br />
<br />
reshare level for CCcam clients<br />
<br />
Example:<br />
cccreshare = -1 # use [[OSCam/en/Config/oscam.conf#reshare|reshare]] level defined in oscam.conf - default<br />
= 0 # reshare for direct peer only<br />
= 1 # resharing for direct peer and next level<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccignorereshare =====<br />
{{Depends/en}}<br />
<br />
only if '''CCcam proxies or CCcam server''' are used!<br />
<br />
CCcam ignore reshare settings<br />
<br />
cccignorereshare = -1 # use ignore reshare level of oscam.conf [ccc] - default <br />
= 0 # use ignore reshare level of server<br />
= 1 # use ignore reshare level of reader or user<br />
<br />
===== cccstealth =====<br />
{{Depends/en}}<br />
<br />
cccstealth = -1|0|1<br />
<br />
-1 = # use CCcam stealth of oscam.conf [ccc] - default<br />
0 = # use extendet OSCam-CCcam-protocol<br />
1 = # behaviour like the original CCcam-protocol, no activate partner detection and extendet<br />
OSCam-CCcam-protocol, prevent other OSCam to detect the server as OSCam-server<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.user&diff=13499
OSCam/en/Config/oscam.user
2019-01-19T19:41:59Z
<p>Felixka: /* pwd */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.user ==<br />
The user configuration file for OSCam contains user definitions. [account] sections in oscam.user are recurring (more than one account).<br />
<br />
=== [account] ===<br />
{{OSCamUserParameter}}<br />
<br />
==== user ====<br />
{{required}}<br />
<br />
account name<br />
<br />
Example:<br />
user = user1<br />
<br />
Default:<br />
user =<br />
<br />
==== pwd ====<br />
{{required}}<br />
<br />
password for account not required for protocol gbox<br />
<br />
Example:<br />
pwd = pwuser1<br />
<br />
Default:<br />
pwd =<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
description of user account (text) <br />
<br />
Описание аккаунта пользователя (текст)<br />
<br />
==== disabled ====<br />
{{Optional/en}}<br />
<br />
account disabled<br />
<br />
Beispiel:<br />
disabled = 0 # (account enabled)<br />
disabled = 1 # (account disabled)<br />
<br />
Default:<br />
disabled = 0<br />
<br />
==== hostname ====<br />
{{Optional/en}}<br />
host from which user connection is allowed<br />
<br />
Example:<br />
hostname = client.dyndns.org<br />
<br />
Default:<br />
hostname =<br />
<br />
==== expdate ====<br />
{{Optional/en}}<br />
<br />
expiration date for account<br />
<br />
Format:<br />
<year>-<month>-<day>|<year>/<month>/<day><br />
<br />
Example:<br />
expdate = 2001-11-21<br />
expdate = 2002/12/22<br />
<br />
Default:<br />
expdate = none<br />
<br />
==== allowedprotocols ====<br />
{{Optional/en}}<br />
<br />
allowedprotocols = [protocol1][,][protocol2][,][protocol3][,]...<br />
<br />
allowed protocols for user<br />
<br />
protocols<br />
camd33<br />
camd35<br />
cs357x<br />
cs378x<br />
newcamd<br />
cccam<br />
gbox<br />
radegast<br />
<br />
example<br />
allowedprotocols = cs357x,gbox # only cs357x and gbox protocols are allowed<br />
= [blank] # all protocols are allowed (default)<br />
<br />
==== allowedtimeframe ====<br />
{{Optional/en}}<br />
<br />
account enabled from - to for specified day(s)<br />
<br />
Format:<br />
DAY@HH:MM-HH:MM[,HH:MM-HH:MM][,HH:MM-HH:MM][;DAY@HH:MM-HH:MM[,HH:MM-HH:MM][,HH:MM-HH:MM]]<br />
where DAY=SUN,MON,TUE,WED,THU,FRI,SAT or ALL (for all possible days)<br />
<br />
comma (,) to separate times and semicolon(;) to separate the different days.<br />
You can use ALL@ if you want the same time frames for everyday.<br />
<br />
Day starts at 00:00 and end at 24:00, so to cover a full day use: DAY@00:00-24:00<br />
<br />
Example:<br />
allowedtimeframe = ALL@10:00-22:00;MON@00:00-02:00,02:45-04:37;FRI@00:00-10:00,22:00-24:00;SAT@00:00-24:00<br />
<br />
If you use: XXX@22:00-05:00 this will be turned into XXX@00:00-05:00,22:00-24:00<br><br />
ALL@ is always checked and used, so you can watch TV the whole day on FRIday in this exemple. There is no problem to overlap ALL@ in a day definition, like for SAT@ definition.<br />
<br />
Default:<br />
allowedtimeframe =<br />
<br />
==== uniq ====<br />
{{Optional/en}}<br />
<br />
Example:<br />
uniq = 0 # disabled, default<br />
uniq = 1 # only one connection per user is allowed<br />
uniq = 2 # set user to fake if source ip is different<br />
(e.g. for newcamd clients with different CAIDs and ports)<br />
uniq = 3 # only one connection per user, but only the last login will survive (old mpcs behavior)<br />
uniq = 4 # set user only to fake if source ip is different, but only the last login will survive<br />
<br />
Default:<br />
uniq = 0<br />
<br />
==== numusers ====<br />
{{Depends/en}}<br />
<br />
used only '''if anticascading''' is enabled!<br />
<br />
numusers = # quantity<br />
<br />
user per account<br />
<br />
Example:<br />
numusers = -1 # (global value from oscam.conf, default)<br />
numusers = 5 # (maximal 5 user)<br />
numusers = 0 # (anticascading disabled)<br />
<br />
==== penalty ====<br />
{{Depends/en}}<br />
<br />
used only if '''anticascading''' is enabled!<br />
<br />
level of penalty:<br />
'''penalty = -1''' # use value of [[OSCam/en/Config/oscam.conf#penalty|penalty]] defined in oscam.conf ('''default''')<br />
penalty = 0 # only logging<br />
penalty = 1 # send fake DWs<br />
penalty = 2 # ban user temporary<br />
penalty = 3 # send DWs with delay ([[OSCam/en/Config/oscam.conf#fakedelay|fakedelay]])<br />
<br />
==== fakedelay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7785:10/22/2012</span><br />
<br />
fakedelay = milli seconds or 0|-1<br />
<br />
se fake delay time individually for user<br />
<br />
0 = fake delay disabled<br />
-1 = fake delay of oscam.conf[global] (default)<br />
= fake delay in milli seconds for user<br />
<br />
==== failban ====<br />
{{Optional}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7772:10/21/2012</span><br />
<br />
mask for IP based blocking:<br />
<br />
failban = 0|2|4|8<br />
<br />
failban = 0 # ignore (default)<br />
failban = 2 # block IP address of a disabled account on connecting<br />
failban = 4 # block IP address of a sleeping account while sleeping comes up<br />
failban = 8 # block duplicate IP address<br />
<br /><br />
<br /><br />
<br />
==== acosc_max_active_sids ====<br />
{{Optional/en}}<br />
<br /><br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7940:05/20/2014</span><br /><br />
<br />
acosc_max_active_sids = count<br />
<br />
maximum active SIDs with anti-cascading over SID<br />
<br /><br />
0 = unlimited, default<br />
-1 = use global setting from oscam.conf [global]<br />
<br /><br />
<br /><br />
<br />
==== acosc_zap_limit ====<br />
{{Optional/en}}<br />
<br /><br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7940:05/20/2014</span><br />
<br />
acosc_zap_limit = count<br />
<br /><br />
zap-limit for anticascading over SID<br />
<br /><br />
0 = unlimited, default<br />
-1 = use global setting from oscam.conf.[global]<br />
<br /><br />
<br /><br />
==== acosc_penalty ====<br />
{{Optional/en}}<br />
<br /><br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7940:05/20/2014</span><br />
<br />
acosc_penalty = 0|1|2|3|-1<br />
<br /><br />
level of penalty with anti-cascading over SID<br />
<br /><br />
0 = only logging, default<br />
1 = send fake CW's<br />
2 = temporary user ban<br />
3 = send delayed CW's<br />
-1 = use global setting from oscam.conf [global]<br />
<br /><br />
<br /><br />
==== acosc_penalty_duration ====<br />
{{Optional/en}}<br />
<br /><br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7940:05/20/2014</span><br />
<br />
acosc_penalty_duration = seconds<br />
<br /><br />
penalty duration for anti-cascading over SID<br />
<br /><br />
0 = mone, default<br />
-1 = use global setting from oscam.conf[global]<br />
<br /><br />
<br /><br />
==== acosc_delay ====<br />
{{Optional/en}}<br />
<br /><br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7940:05/20/2014</span><br />
<br />
acosc_delay = milli-seconds<br />
<br /><br />
Dauer des delay für anti-cascading über SID<br />
<br /><br />
0 = none, default<br />
-1 = use global setting Oscam.conf[global]<br />
<br /><br />
<br /><br />
<br />
<br />
<br />
<br />
<br />
==== lb_nbest_readers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8642:05/10/2013</span><br />
<br />
lb_nbest_readers = count<br />
<br />
set count of best readers for load balancing<br />
<br />
-1 = use global lb_nbest_readers in oscam.conf<br />
1 = default<br />
<br />
==== lb_nbest_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8642:05/10/2013</span><br />
<br />
lb_nbest_percaid = CAID1:count1[,CAID2:count2]...<br />
<br />
set count of best readers per CAIDs for load balancing, wildcards CAIDs with two-digit CAIDs possible.<br />
default = none<br />
<br />
example<br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1<br />
(wildcards CAIDs 03xx and 04xx)<br />
<br />
==== preferlocalcards ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 10050:11/30/2014</span><br />
<br />
preferlocalcards = 0|-1|1|2<br />
<br />
-1 = global value from oscam.sonf[global] (default)<br />
0 = local SCs used like a remote reader<br />
1 = prefer call exchange based SCs<br />
2 = prefer local SCs<br />
<br />
<br />
<br />
==== cwc_disable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 10049:11/30/2014</span><br />
<br />
cwc_disable = 0|1<br />
<br />
1 = disable cw cycle check<br />
0 = default<br />
<br />
<br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6039:11/26/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.server!<br />
<br />
Identical cache exchange modes must be set on local OSCam user account and remote OSCam server!<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new ECMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= defaolt = 10 hops<br />
<br />
define maximum hops for cache exchange<br />
<br />
<br />
==== sleep ====<br />
{{Optional/en}}<br />
<br />
time waiting for inactive user in minutes<br />
<br />
Example:<br />
sleep = 5<br />
<br />
Default:<br />
sleep =<br />
<br />
==== sleepsend ====<br />
{{Optional/en}}<br />
0|255<br />
<br />
255 = '''OSCam client''' only: stopping requests until next zap,<br />
<br />
255 = '''camd 3.x''' only: stopping requests until restart of camd3 client<br />
<br />
Examples:<br />
sleepsend = 0<br />
sleepsend = 255<br />
<br />
Default:<br />
sleepsend =<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
switches suppress of CMD08<br />
<br />
suppresscmd08 = 0 # CMD08 for camd3 3.57x/3.78x clients '''enabled'''<br />
suppresscmd08 = 1 # CMD08 for camd3 3.57x/3.78x clients '''disabled'''<br />
<br />
Default:<br />
suppresscmd08 = 0<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<br />
disable keepalive between newcamd-server and client connection<br />
<br />
keepalive = 0 # disabled <br />
keepalive = 1 # enabled (default)<br />
<br />
==== umaxidle ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8929:09/25/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9801:07/17/2014</span><br />
<br />
umaxidle = seconds<br />
<br />
value for user being idle before disconnect. <br />
<br />
-1 = use clientmaxidle in [global]-section<br />
0 = idle disconnect disabled (default)<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== au ====<br />
{{Optional/en}}<br />
<br />
Format:<br />
label of reader[,label of reader]...|1<br />
<br />
AU settings:<br />
au = [label of reader] # sending EMMs to specified reader<br />
(security issue: clients can see SC data!)<br />
au = 1 # auto AU is sending EMMs to all readers<br />
(security issue: clients can see SC data!)<br />
Default:<br />
au = [blank] # none<br />
<br />
<br />
Sometimes only global emm's update '''same caid cards''':<br />
<br />
- check if you blocked unique/shared in READER Blockemm<br />
<br />
- don't use au = 1, use au = [label of reader]<br />
<br />
- if still troublesome use '''in house''' different user to update each card by [label of reader]<br />
<br />
example: <small>cd__nl</small> and <small>tv__vl</small> have a common provider: <small>m7 group sa</small> and share updates on shared channels.<br />
<br />
user 1: AU: <small>cd__nl</small>,sky_uk<br />
<br />
user 2: AU: <small>tv__vl</small><br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
user assingment to reader group. Valid 64 groups<br />
<br />
Format:<br />
group = 1....64[,1....64]....<br />
default = none<br />
<br />
==== betatunnel ====<br />
{{Optional/en}}<br />
<br />
define Betacrypt tunneling (max. see CS_MAXTUNTAB in globals.h). The ServiceID can also be used for wildcarded CAIDs.<br />
<br />
Format:<br />
<CAID>.<ServiceID>:<target CAID>[,<CAID>.<ServiceID>: <target CAID>]...<br />
<br />
Example:<br />
betatunnel = 0100.0001:0200,0300.0004:0500<br />
betatunnel = 0600.FFFF:0700<br />
<br />
Default:<br />
betatunnel =<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8591:01/04/2013</span><br />
<br />
<br />
emmreassembly = 0|1||2 <br />
<br />
EMM reassembly, should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling them instead of just sending them to OSCam for processing.<br />
<br />
0: disabled <br />
1: enabled for DVB API <br />
2: enabled (default)<br />
<br />
<br />
==== services ====<br />
{{Optional/en}}<br />
<br />
What services may use the User.? This requires a oscam.services be present. The logic here is as follows (in this order): <br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with '''!''') is applicable, the request is rejected. <br />
* If a positive service is applicable or there is no positive service, the request is allowed. <br />
* If none of the previous points, the request is rejected. <br />
This means that negative Services are only necessary in individual cases. Namely, exactly, then if you have a positive service, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels. <br />
<br />
Example: <br />
services = service1,!service2 # (client may receive service1, but not service2) <br />
services = [!]services <br />
<br />
Default: <br />
services =<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
user assingment to SC specific idents<br />
<br />
Format:<br />
<CAID>:<ident>[,<ident>,...][;<CAID>:<ident>[,<ident>,...]]...<br />
<br />
default = none<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
user [de]assingment to SC specific classes<br />
<br />
Format:<br />
[!]class[,[!]class]...<br />
<br />
Example:<br />
class = 01,02,!03,!04<br />
<br />
default = none<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
user assingment to SC specific ChID<br />
<br />
Format:<br />
chid = <CAID>:<ChID>[,<ChID>,...][;<CAID>:<ChID>[,<ChID>,...]]...<br />
= [blank] default<br />
<br />
==== monlevel ====<br />
{{Optional/en}}<br />
<br />
monitor level:<br />
monlevel = 0 # no access to monitor<br />
monlevel = 1 # only server and own procs<br />
monlevel = 2 # all procs, but viewing only, default<br />
monlevel = 3 # all procs, reload of oscam.user possible<br />
monlevel = 4 # complete access<br />
<br />
==== ccc ====<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
only if '''CCcam proxies or CCcam server''' are used!<br />
<br />
maximum hops limit for CCcam clients<br />
<br />
cccmaxhops = -1 # CCcam disbled for this user<br />
0 # local SCs only<br />
1 # local SCs + 1 hop<br />
2 # local SCs + 2 hops<br />
# and so on<br />
<br />
Default:<br />
cccmaxhops = 10 # local SC's + 10 hops<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8608:04/10/2013</span><br />
<br />
<br />
reshare level for CCcam clients<br />
<br />
Example:<br />
cccreshare = -1 # use [[OSCam/en/Config/oscam.conf#reshare|reshare]] level defined in oscam.conf - default<br />
= 0 # reshare for direct peer only<br />
= 1 # resharing for direct peer and next level<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccignorereshare =====<br />
{{Depends/en}}<br />
<br />
only if '''CCcam proxies or CCcam server''' are used!<br />
<br />
CCcam ignore reshare settings<br />
<br />
cccignorereshare = -1 # use ignore reshare level of oscam.conf [ccc] - default <br />
= 0 # use ignore reshare level of server<br />
= 1 # use ignore reshare level of reader or user<br />
<br />
===== cccstealth =====<br />
{{Depends/en}}<br />
<br />
cccstealth = -1|0|1<br />
<br />
-1 = # use CCcam stealth of oscam.conf [ccc] - default<br />
0 = # use extendet OSCam-CCcam-protocol<br />
1 = # behaviour like the original CCcam-protocol, no activate partner detection and extendet<br />
OSCam-CCcam-protocol, prevent other OSCam to detect the server as OSCam-server<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13498
OSCam/en/Config/oscam.server
2019-01-10T18:20:26Z
<p>Felixka: /* cccam_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password provided by peer (4 bytes, 8 hex chars)<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these CAIDs.<br />
'''Attention: The CAID filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 3<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to send into gbox network<br />
<br />
cccam_reshare = level default = 1<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13497
OSCam/en/Config/oscam.server
2018-12-31T16:45:34Z
<p>Felixka: /* user */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password provided by peer (4 bytes, 8 hex chars)<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these CAIDs.<br />
'''Attention: The CAID filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 3<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to send into gbox network<br />
<br />
cccam_reshare = level default = 2<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13496
OSCam/en/Config/oscam.server
2018-12-31T16:41:38Z
<p>Felixka: /* password */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password provided by peer (4 bytes, 8 hex chars)<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these caids.<br />
'''The filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 3<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to send into gbox network<br />
<br />
cccam_reshare = level default = 2<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13495
OSCam/en/Config/oscam.server
2018-12-23T21:23:39Z
<p>Felixka: /* gbox */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password = 4 hex bytes, 8 chars<br />
<br />
peer password<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
do not use passwords like AAAAAAAA or AAAABBBB. <br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_willy<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''the gbox user must also be set-up in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer tasks and responses<br />
<br />
'''You can add to the user account in oscam.user 'caid = caid_1,caid_2,..' to filter cards for a specific peer<br />
'''In this case the user (peer) will get only cards with these caids.<br />
'''The filter is applied for both Local- and Peer-Cards<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 3<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to send into gbox network<br />
<br />
cccam_reshare = level default = 2<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13494
OSCam/en/Config/oscam.server
2018-12-23T11:21:02Z
<p>Felixka: /* gbox_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password = 4 hex bytes, 8 chars<br />
<br />
peer password<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_client<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''gbox user must also be inserted in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer responses<br />
<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] and [account] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - none of your local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 3<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to send into gbox network<br />
<br />
cccam_reshare = level default = 2<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13493
OSCam/en/Config/oscam.server
2018-12-22T19:54:40Z
<p>Felixka: /* gbox_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password = 4 hex bytes, 8 chars<br />
<br />
peer password<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_client<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''gbox user must also be inserted in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer responses<br />
<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] and [account] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Share-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - no local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his direct peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 3<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to send into gbox network<br />
<br />
cccam_reshare = level default = 2<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13492
OSCam/en/Config/oscam.server
2018-12-22T19:52:51Z
<p>Felixka: /* gbox_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password = 4 hex bytes, 8 chars<br />
<br />
peer password<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_client<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''gbox user must also be inserted in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer responses<br />
<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] and [account] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Reshare-Level of local card(s)<br />
<br />
gbox_reshare = 0|1|...|5 , default = 2, max = 5<br />
<br />
examples:<br />
<br />
gbox_reshare = 0 - no local crds send to peer<br />
gbox_reshare = 1 - local crds send to direct peer only<br />
gbox_reshare = 2 - local crds send to direct peer and his peer(s)<br />
etc<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 3<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to send into gbox network<br />
<br />
cccam_reshare = level default = 2<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.server&diff=13491
OSCam/de/Config/oscam.server
2018-12-17T14:01:56Z
<p>Felixka: /* detect */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.server''' ==<br />
Diese Konfigurationsdatei enthält Reader-Parameter für OSCam. Die Abschnitte dürfen sich wiederholen (mehr als ein Reader möglich). Es muss aber in jedem Fall mindestens ein reader konfiguriert sein!<br />
<br />
Beispiel-Konfiguration für die wichtigsten Reader sind hier zu finden [[OSCam/de/examples/Reader|Beispiel-Konfigurationen]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
<br />
=== '''Reader''' ===<br />
'''Grundsatz:''' Es können mehrere [reader]-Abschnitte erstellt werden. Jeder vollständige Abschnitt wird dann als Reader verwendet. Er '''muss''' immer mit [reader] beginnen. Im Parameter "label" kann dann die Art des Readers beschrieben werden:<br />
<br />
Beispiele: easymouse, phönix, smargo, sc8in1 usw.<br />
<br />
<br />
==== label ====<br />
{{Mandatory}}<br />
<br />
Legt den Namen für diesen Reader fest.<br />
<br />
'''Der Name des Labels darf nicht identisch zu einem Usernamen (oscam.users) sein!'''<br />
<br />
<br />
Beispiel<br />
label = easymouse2<br />
<br />
<br />
==== enable ====<br />
{{Optional}}<br />
Reader aktivieren/deaktivieren<br />
enable = 0 # Reader aus<br />
= 1 # Reader ein (default)<br />
<br />
==== description ====<br />
{{Optional}}<br />
description = Text <br />
<br />
Beliebiger Text zur Beschreibung des readers; default: [blank] keine Beschreibung<br />
<br />
'''Nicht zu verwechseln mit ''label''!''' Hier kann zusätzlich eine Information hinterlegt werden, z.B. Reader nur für CI+ usw.<br />
<br />
<br />
==== protocol ====<br />
{{Mandatory}}<br />
Kommunikationsprotokoll für den Reader.<br />
protocol = mouse # (Lokaler Cardreader)<br />
= internal # (Alle Cardreader mit einem "Device=/dev/sciX", sowie interne Coolstream-Reader)<br />
= camd35|cs357x # (Cascading - camd 3.5-kompatibler Remote-Server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x # (camd 3.5-kompatibler Remote-Server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1 # (SC8in1 und MCR 4/8 Cardreader)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''smartreader:''' Es können Probleme auftreten, wenn der Cardreader im smartreader-Modus in einem USB-Hub betrieben wird.<br />
In diesem Fall den Cardreader direkt am PC/Receiver einstecken und erneut testen.<br />
Sollte es dann funktionieren, ggf. einen anderen USB-Hub besorgen.<br />
<br />
<br />
==== device ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8911:09/10/2013</span><br />
<br />
Legt den local oder remote reader Abschnitt [reader] fest:<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw <br />
<br />
Bestimmt den reader type:<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3 <br />
bus:device: Bus- und Device-Namen von Smartreader+ oder Infinity USB (mit lsusb 'Bus' und 'Device' holen)<br />
serialnum: Serial-Nummer des Smartreader+ oder Infinity USB<br />
device: Name der Device<br />
device:slot: device name und slot-nummer '''für sc8in1''' (1-8)<br />
'''Es wird nur ein SC8in1 unterstützt!'''<br />
ip|hostname: IP-Adresse oder Hostname<br />
port: TCP/IP port <br />
lport: Remapping für den Local-Port (TCP/IP)<br />
PCSC: Nummer des PCSC-Readers (mit 0 starten!)<br />
Alternativ kann über den Namen des Readers (bzw. einen Teil davon) selektiert werden, z.B. "-1:SCR 3310" (Namen der erkannten Reader werden bei "oscam -d 32" ausgegeben)<br />
0|1: '''Nur für die Coolstream HD-1''' (Reader 0 oder 1 auswählen)<br />
constantcw: Dateiname für das Constant-CW-File<br />
<br />
Format des CW-Files: <br />
'''Standard-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
Beispiele für device--parameter:<br />
device = /dev/ttyS0 # Reader an COM1 (bei Linux i386 und Windows)<br />
device = /dev/tts/1 # Reader an COM2 (Linux dbox2 mit multicam)<br />
device = /dev/ttyUSB0 # Reader an USB (Linux i386)<br />
device = Serial:Reader 1 # z.B. Smargo im smartreader-Modus, wobei die Kennung "Reader 1" der Smargo-Konfiguration zu entnehmen ist!<br />
device = /var/keys/constant.cw # Einbindung eines constantcw<br />
device = /dev/ttyUSB0:1 # Slot 1 eines SC8in1 oder MCR 4/8 (Linux i386)<br />
<br />
'''Hinweis:''' Der Zähler für die Device liegt immer um 1 hinter der Nummer des COM-Ports! Also ttyS0 = COM1, tts/1 = COM2. Bei Benutzung neuerer PC sind kaum noch serielle Anschlüsse vorhanden, sodass in diesen Fällen USB 2.0 benutzt werden muss. Hier am besten im Gerätemanager des PC nachschauen, welcher COM-Port dem Reader zugewiesen wurde und in die Device den Port -1 eintragen!<br />
<br />
==== detect ====<br />
{{Depends}}<br />
Der Card Status (Karte im Reader eingeführt oder entfernt) wird detektiert mit Hilfe einer handshake input Leitung der seriellen Schnittstelle (UART/SCI) - cd, cts, dsr oder ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" bedeutet: Keine Leitung zum detektieren des Card Status vorhanden. Karte wird immer als im Kartenleser gesteckt erkannt.<br />
<br />
* Falls das detect signal invertiert ist: prefix "!" (eg "detect = !cts")<br />
<br />
<br />
Falls Parameter '''use_gpio = 1''' gesetzt ist:<br />
<br />
detect = gpio1...gpio7 - Card Status wird über einen gpio erfasst. GPIO means "general purpose input output". <br />
<br />
<br />
Beispiel:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
'''protocol = mouse'''<br />
'''device = /dev/ttyUSB0''' (easymouse 2)<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends}}<br />
Benutze gpio als card detect/ reset. Siehe auch '''detect ='''<br />
use_gpio = 0|1 #default = 0<br />
<br />
==== cardmhz ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
'''Standard'''-Frequenz der Karte in Schritten von 10 KHz. Für Irdeto-Karten z.B. "cardmhz = 600" (6 Mhz)<br />
<br />
Beispiel:<br />
cardmhz = 600 # Irdetokarte<br />
= # [blank] Default-Wert 357<br />
<br />
'''Interne-Dreambox-Leser'''<br />
<br />
Wenn cardmhz >2000 eingetragen wird aktiviert OScam den PLL-Clock. Interne-Dreambox-Leser (Dream Multimedia GmbH und Clones) können damit optimal getaktet werden.<br />
<br />
Der verwendete cardmhz-wert entspricht dem höchsten PLL-Takt. OSCam wird dann den optimalen PLL-Teiler berechnen damit die Frequenz möglichst nahe an den Wert kommt welcher bei "mhz" definiert wurde.<br />
<br />
Benutze die folgenden Einstellungen:<br />
<br />
Modelle mit PPC-CPU (DM500/DM600/DM7000/DM7020): "cardmhz = 3150"<br />
<br />
Modelle mit MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.): "cardmhz = 2700"<br />
<br />
Die DM7025 ist speziell: "cardmhz = 8300"<br />
<br />
'''Wird nur der Parameter cardmhz gesetzt (ohne mhz = xxx) wird die Karte automatisch anhand des ATR getaktet!'''<br />
<br />
Beispiel:<br />
Du hast eine Dream 800 HD PVR, das ist eine MIPS, daher muss du "cardmhz = 2700" setzen. Nehmen wir an du hast eine Nagra-Karte welche auf 5 MHz laufen soll.<br />
Wenn du die Karte richtig takten willst verwende "cardmhz = 2700" und "mhz = 500", Oscam taktet die Karte dann mit der nächst möglichen Frequenz (4.50 Mhz).<br />
Möchtest du sie übertakten, dann verwende "cardmhz = 2700" und z.B. "mhz = 900".<br />
Deine Karte läuft nun auf 9 Mhz. Aber vorsichtig, eine übertaktete Karte kann heiss und instabil werden! ([[OSCam/de/examples/Overclocking|Overclocking]] beachten!)<br />
<br />
Viele Interne-Leser von anderen Herstellern als Dream ignorieren die eingestellten Werte! Aber du solltest "cardmhz" und mhz" trotzdem setzen da es zum berechnen der richtigen "timings" verwendet wird. Wenn du cardmhz/mhz richtig setzt ist das "timing" besser für die aktuelle (automatisch gesetzte) Frequenz des Internen-Lesers. Als Ergebnis bekommst du bessere ECM-Zeiten oder mehr Stabilität.<br />
<br />
Erwarte keine Wunder, nur ein übertakten der Karte bringt bessere ECM-Zeiten. Schlechtes "timing" kann jedoch zu verzögerungen führen oder die Karte instabil machen.<br />
<br />
'''Nützliche Links:'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|Liste verschiedener Karten und ihren Frequenzen]]'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
==== mhz ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
mhz = Frequenz in KHz<br />
<br />
Sofern dies technisch möglich ist kann abweichend von '''cardmhz''' die Frequenz des Kartenlesers anders (in der Regel höher) als die Standard-Frequenz der Karte eingestellt werden (in 10 KHz-Schritten). Man spricht dann von [[OSCam/de/examples/Overclocking|Overclocking]]. So kann z.B. eine S02-Karte (Standard 6 MHz) mit 10 MHz übertaktet werden.<br />
<br />
Beispiel Externe-Reader:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
Beispiel DM800:<br />
cardmhz = 2700 # (27MHz PLL)<br />
mhz = 900 # (Wert wird berechnet -> 27Mhz : 3 = 9 Mhz)<br />
<br />
Hier eine ausführlichere Beschreibung von '''stefansat''' aus der Distri-Doku:<br />
<br />
Wenn die Frequenz in '''mhz''' größer ist als in '''cardmhz''', dann befindest Du dich im [[OSCam/de/examples/Overclocking|Overclocking]] Modus.<br />
<br />
Smargo-Reader und interne Reader der Dreamboxen werden durch den '''ATR''' automatisch eingestellt, wenn '''autospeed = 1''' (siehe nächsten Parameter) gesetzt ist.<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
<br />
==== autospeed ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
1 = setzt den mhz-Wert anhand des ATR (default)<br />
0 = disabled<br />
<br />
<br />
==== deprecated ====<br />
{{Optional}}<br />
Zuerst wird die Smartcard im Normal-Modus initialisiert. Schlägt dies fehl, wird die Initialisierung automatisch auf den veralteten Modus umgeschaltet, so dass die Smartcard-Geschwindigkeit nicht verändert wird und die Kommunikation auf normaler ATR Geschwindigkeit von 9600 Baud bleibt.<br />
deprecated = 1 # ausschließlich veralteter Modus<br />
= 0 # default<br />
<br />
<br />
==== mode ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Nur für AZBox'''<br />
<br />
mode = 1 # AzBox-Reader<br />
= 0 # default<br />
Setzt den Init-Mode für die Karte im internen AZBox-reader<br />
<br />
<br />
==== device_out_endpoint ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8013:12/29/2012</span><br />
<br />
Setzt die Addresse des Endpunkts für FTDI-Chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
<br />
==== smargopatch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet den workaround für smargoreader+ und reader ein, bis der native mode funktioniert<br />
smargopatch = 1<br />
= 0 (default)<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet fix für SC8in1/MCR DTR/RTS kernel bug ein<br />
sc8in1_dtrrts_patch = 1<br />
= 0 # (default)<br />
<br />
<br />
==== cool_timeout_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6286:01/23/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Setzt beim init der SC einen timeout in Millisekunden fest (im internen Reader).<br />
cool_timeout_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Hier kann ein timeout der SC für read/transmit nach dem init in Millisekunden festgelegt werden (nur für interne Reader).<br />
cool_timeout_after_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9568:03/16/2014</span><br />
<br />
Fügt einen Controll-Check für Pin Payload von NDS Videoguard Karten hinzu (4 Hex-Bytes). '''Gültig nur für physikalische Reader'''<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
<br />
==== ins7e ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5959:09/22/2011</span><br />
<br />
Füge 26 hex-bytes payload für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e = payload<br />
= # [blank] default (none)<br />
<br />
<br />
==== ins7e11 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6064:12/06/2011</span><br />
<br />
Füge TA1 für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e11 = TA1 Byte<br />
= # [blank] default (none)<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
<br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9884:09/30/2014</span><br />
{{Optional}}<br />
schaltet den 0x07-EMM-Fix für NDS Videoguard 2 Karten ein. '''Gültig nur für physikalische Reader'''<br />
fix07 = 1 # 0x07-EMM-Fix eingeschaltet (default)<br />
= 0 # ausgeschaltet <br />
<br />
<br />
==== force_irdeto ====<br />
{{Optional}}<br />
Forciert den Irdeto-Modus, auch wenn ein RSA-Key für Irdeto getunnelte Nagravisions-Karte vorliegt.<br />
force_irdeto = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
==== nagra_read ====<br />
{{Optional}}<br />
Lese Nagravision-Records. '''Nur für NCMED-Karten'''<br />
nagra_read = 0 # ausgeschaltet (default)<br />
= 1 # lese alle Records mit abgelaufenen Rechten<br />
= 2 # lese nur Records mit gültigen Rechten<br />
<br />
<br />
==== rsakey ====<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7046:06/12/12</span><br />
{{Optional}}<br />
<br />
RSA key für Nagravision/Tiger SCs / CAM key data für Irdeto SCs, Conax SCs<br />
rsakey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== fix9993 ====<br />
{{Optional}}<br />
fix9993 = 0|1<br />
<br />
Fixed den error 9993 bei CAID 0919 SC's<br />
<br />
fix9993 = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== readtiers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
Methode wie die Tiers von NDS Videoguard Smartcards ausgelesen werden.<br />
<br />
readtiers = 0 # ausgeschaltet (default)<br />
readtiers = 1 # ins70 (neue) Methode <br />
readtiers = 2 # ins76 (alte) Methode <br />
<br />
==== boxkey ====<br />
{{Optional}}<br />
Boxkey für Nagravision SCs / CAM key für Irdeto SCs<br />
boxkey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== pincode ====<br />
{{Optional}}<br />
Pincode für '''Conax-, Cryptoworks- und Viaccess-''' Karten.<br />
pincode = code<br />
= # [blank] default<br />
<br />
<br />
==== boxid ====<br />
{{Optional}}<br />
ID der '''NDS-Reciever-Box'''<br />
boxid = NDS box ID<br />
= # [blank] default<br />
<br />
<br />
==== ndsversion ====<br />
{{Optional}}<br />
Version von '''NDS Videoguard''' einsetzen<br />
ndsversion = 0 # autodetection (default)<br />
ndsversion = 1 # NDS Videoguard 1<br />
ndsversion = 12 # NDS Videoguard 1+<br />
ndsversion = 2 # NDS Videoguard 2<br />
<br />
<br />
==== aeskeys ====<br />
{{Optional}}<br />
Multiple AES-Keys für '''Viacces-Karten'''<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
Spezial AES Keys:<br />
00 = schicke keine CW zurück, es ist kein AES-Key spezifiziert<br />
FF = schicke CW zurück, die vom S empfangen wurden, es ist kein AES-Key spezifiziert<br />
<br />
Beispiel<br />
aeskeys = 0100@012345:000102030405060708090a0b0c0d0e0f;0200@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6624;04/23/2012</span><br />
{{Optional}}<br />
Anzahl der Subscritions-Klassen für '''Viacces'''<br />
schowcls = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== key ====<br />
{{Depends}}<br />
Key für Newcamd remote reader encription<br />
key = DES key<br />
<br />
<br />
==== user ====<br />
{{Optional}}<br />
Username für Remote-Reader.<br />
<br />
Beispiel<br />
user = # xyxyx<br />
<br />
<br />
==== password ====<br />
{{Optional}}<br />
Passwort für Remote-Reader.<br />
<br />
Beispiel<br />
password = # xyxyx<br />
<br />
<br />
==== mg-encrypted ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO</span><br />
<br />
mgcamd encrypted line für '''GBox!'''<br />
<br />
Format:<br />
<br />
mg-encrypted = D: { <IP|hostname> { <local port> <remote port> { <password> { <level> <level> }}}}[,<local MAC address>] # default MAC address=eth0<br />
<br />
default:<br />
mg-encrypted = # [blank] (none)<br />
<br />
<br />
==== services ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' <br />
<br />
Wenn Loadbalancing aktiviert ist, sind folgende Besonderheiten zu berücksichtigen:<br />
* Services sind für den Loadbalancer eine '''Whitelist'''. Das bedeutet, dass alles, was hier eingetragen wird, vom Loadbalancing als Service behandelt wird, den die Karte '''kann'''! Wenn dann z.B. ein "not found" kommt, wird das ignoriert und die Karte wird weiter angefragt, mit dem damit verbundenen traffic!<br />
* Daraus ergibt sich, dass der Eintrag von Services bei '''lokalen''' Karten und Proxies, '''die man genau kennt''', kein Problem darstellt.<br />
* Anders verhält es sich bei Proxies (z.B. CCcam), deren Services '''man nicht kennt'''. Hier ist davon abzuraten, Services einzutragen. In einem solchen Fall sollten vielmehr die Services bestimmt werden, die '''nicht zu berücksichtigen''' sind (Eintrag mit (!)), oder besser eine Filterung über den Parameter '''caid''' erfolgen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Die Anzahl der services, die je reader berücksichtigt werden, ist auf 64 begrenzt, also 64 mal [[service-name][CAID][provid][srvid]]! <br />
<br />
Welche Services kann der Reader. Hierzu muss eine oscam.services vorhanden sein. Die Logik ist hier folgendermaßen (in der angegebenen Reihenfolge):<br />
* Wenn das Feld leer ist (oder ungültig) wird die Anfrage erlaubt.<br />
* Wenn ein negativer Service (also solche mit "!") zutreffend ist, so wird die Anfrage abgewiesen.<br />
* Wenn ein positiver Service zutreffend ist oder es gar keinen positiven Service gibt, so wird die Anfrage erlaubt.<br />
* Wenn keiner der vorigen Punkte zutrifft, so wird die Anfrage abgewiesen.<br />
Dies bedeutet, dass negative Services nur in Einzelfällen nötig sind. Nämlich genau dann, wenn man positive Services hat, davon aber wieder einige ausnehmen will. Dies wird nicht empfohlen, da es hier schnell zu Fehlkonfigurationen kommt. Stattdessen sollte ein zusätzlicher Service angelegt werden, der alle entsprechenden Sender enthält.<br />
services = [!]services[,[!]<services>]...<br />
= [blank] ist default<br />
<br />
Beispiel<br />
services = skywelt,skyweltextra,!skyfilm<br />
# skywelt und skywelt extra sind zugeordnet, skyfilm ist ausgeschlossen<br />
<br />
<br />
==== caid ====<br />
{{Optional}}<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
definiert und mapped CAIDs für Reader<br />
<br />
Beispiele:<br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut für das Beispiel oben)<br />
default: alle CAIDs mit der Maske FFFF<br />
<br />
<br />
==== ident ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Wenn in oscam.conf [global] unter lb_mode loadbalancing aktiviert ist, dann dürfen hier keine Einträge stehen!<br />
<br />
Definiert CAID und Ident '''kartenspezifisch''' für den Reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Beispiel<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] Keine Definition (default)<br />
<br />
<br />
==== class ====<br />
{{Optional}}<br />
Definiert Class '''in hexadecimal''' kartenspezifisch für den Reader:<br />
class = 01,02,!1b,!2b # 01 und 01 ja, 1b und 2b nein<br />
= # [blank] Keine Definition (default)<br />
<br />
<br />
==== chid ====<br />
{{Optional}}<br />
Definiert '''Irdeto'''-ChID für den Reader.<br />
<br />
Beispiel<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
<br />
==== group ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6103:12/21/2011</span><br />
<br />
Jeder Reader muss in einer oder mehrere Gruppen eingetragen sein. Damit lässt sich bestimmen, welcher Client auf welchen Reader Zugriff hat. Gültige Werte 1-64<br />
group = 1....64[,1....64]....<br />
<br />
'''Da ein Eintrag zwingend ist, darf hier kein [blank] als default stehen!'''<br />
<br />
Beispiel<br />
Group = 1 # (eine Gruppe)<br />
Group = 1,4,5 # (mehrere Gruppen)<br />
<br />
<br />
==== audisabled ====<br />
{{Optional}}<br />
Schließt den Reader vom AU (Auto-Updating) aus<br />
audisabled = 1 # ausgeschlossen<br />
= 0 # nicht ausgeschlossen (default)<br />
<br />
<br />
==== auprovid ====<br />
{{Optional}}<br />
Hier kann die Provider-ID festgelegt werden, damit der richtige Reader für das AU zur Verfügung steht<br />
<br />
Beispiel<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
<br />
==== disableserverfilter ====<br />
{{Optional}}<br />
Ignoriert CAID und Ident-Einstellungen des Readers bei fehlerhaften Clients.<br />
disableserverfilter = 1 # ignoriert<br />
= 0 # ignoriert nicht (default)<br />
<br />
<br />
==== inactivitytimeout ====<br />
{{Depends}}<br />
Für alle TCP-basierende remote Reader<br />
<br />
inactivitytimeout = # in Sekunden<br />
= -1 # Verbindet '''newcamd''' basierende Reader bei einem Netzwerkausfall erneut (auch im Leelauf - idle -)<br />
= 0 # default<br />
<br />
<br />
==== reconnecttimeout ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7244:08/07/2012</span><br />
<br />
Zeitspanne in Sekunden für eine Wiederverbindung mit einem Remote-Reader, wenn Antworten ausbleiben<br />
<br />
Beispiel<br />
reconnecttimeout = 20 # Nach 20 Sekunden ohne Antworten wird wiederverbunden<br />
= # [blank] default 30 Sekunden<br />
<br />
<br />
==== connectoninit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = Ermöglicht die Herstellung einer Newcamd-Verbindung, solange noch kein Request vorliegt<br />
0 = default<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = ermöglicht es einem cs378x TCP socket, ständig verbunden zu sein<br />
0 = Immer eingeschaltet bei einem cacheex reader type (default)<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Definiert diesen Reader als Fallback. Standard- und Fallback-Reader müssen in der selben Gruppe sein. Siehe '''group'''!<br />
fallback = 1 # Fallbackreader<br />
= 0 # Kein Fallbackreader (default)<br />
<br />
'''Info:'''<br />
<br />
Ist Loadbalancing aktiviert, und zusätzlich der Parameter "cwcycle_allowbadfromffb = 1", wird dieser Reader ein fixed Fallback für CacheEx.<br />
Somit wird er verwendet wenn ein Bad Cycle erkannt wird, damit freetzer entsprechend verhindert werden können.<br />
--> siehe [[OSCam/de/Config/oscam.conf#cwcycle_allowbadfromffb|cwcycle_allowbadfromffb]]<br />
<br />
<br />
==== fallback_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
Benutze den Reader nur als fallback für vorher definierte CAIDs, two-digit wildcards sind möglich. Dieser Parameter überschreibt den Parameter fallback!<br />
Default = none<br />
<br />
Beispiel:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional}}<br />
Definition des EMM-Caches für den Reader. Derzeit nur für lokale Reader. Betrifft die AU-Funktion. Damit kann entschieden werden, ob Update-Kommandos (EMM) vom Provider immer oder nur unter bestimmten Voraussetzungen geschrieben werden.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
Ohne diesen Parameter werden keine EMM im Log angezeigt!<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # cache/stats aus (default)<br />
* <usecache> 1 = # cache/stats ein und schreibe sie in eine Datei wenn oscam beendet wird<br />
* <usecache> 2 = # cache/stats ein, aber schreibe sie beim beenden von oscam <ins>nicht</ins> in eine Datei<br />
<br />
* <rewrite> n = # Wie oft ein und das selbe Update-Kommando (EMM) geschrieben wird. ''Gilt nur bei <usecache> = 1 oder 2''<br />
<br />
* <logging> 0 = # Einträge im Logfile ausgeschaltet (default)<br />
* <logging> 1 = # Nur fehlerhafte EMM werden geloggt<br />
* <logging> 2 = # die geschriebenen (written) EMM werden geloggt<br />
* <logging> 4 = # die zurückgewiesenen (skipped) EMM werden geloggt<br />
* <logging> 8 = # die blockierten (blocked) EMM werden geloggt<br />
* <logging> 16 = # disabled AU werden geloggt<br />
Aufsummieren der Werte ist möglich, 31 wird also alle loggen.<br />
<br />
* <stb-emm> 0 = # EMM für die STB werden ignoriert (default)<br />
* <stb-emm> 1 = # EMM für die STB werden zum Reader gesendet (nur sehr spezifisch nötig)<br />
<br />
Beispiele:<br />
emmcache = 1,3,10,0 # Cache ein, 3 x schreiben, die geschriebenen (2) und die geblockten (8) = 10 loggen, keine stb-emm senden<br />
emmcache = 1,2,6,1 # Cache ein, 2 x schreiben, die geschriebenen (2) und die zurückgewiesenen (4) = 6 loggen, stb-emm senden<br />
<br />
'''stb-emm''': ist nur für einige Viaccess-User sinnvoll (siehe Commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) und '''bestimmt nicht für User mit einer echten Karte im Reader'''.<br />
<br />
Dazu [http://www.streamboard.tv/wbb2/thread.php?postid=538345#post538345 noch ein Zitat vom User ''pr2'']: "In Viaccess sahen wir einige EMM-G, die für die Set-Top-Box(STB) waren und nicht für die Karte, deshalb nennen wir das STB-EMM. Diese EMMs setzen den Overencryption-Key (AES) in der STB für die Verschlüsselung der Kommunikation zwischen STB und Karte."<br />
<br />
<br />
==== emmreassembly ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8591:04/01/2013 Parameter jetzt in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = schaltet Neuaufbau von EMM ein, default<br />
0 = schaltet Neuaufbau von EMM aus<br />
<br />
Sollte bei '''Viaccess und Cryptoworks Readern''' gesetzt werden, wenn der Client, der für das Senden von EMMs benutzt wird, die EMMs neu aufbaut anstelle sie an OScam zur Bearbeitung zu senden.<br />
<br />
<br />
==== cacheex ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
cacheex = 1 # enable cache exchange pull mode<br />
cacheex = 2 # enable cache exchange push mode<br />
cacheex = 3 # enable cache exchange revers push mode<br />
cacheex = 0 # aus (default)<br />
<br />
Identische modes müssen bei local OSCam server und remote OSCam user account gesetzt werden!<br />
Nur für camd3.5x und CCcam Protokolle!<br />
<br />
Siehe auch entsprechenden Parameter in oscam.user!<br />
<br />
[[Datei:MessageS.png|text-bottom]]'''Ein ausführliches How-To findet man [[Streamboard-Post:406230|hier]]'''<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam A erhält eine ECM Anfrage, reader1 sendet diese Anfrage an OSCam B,<br />
<br />
OSCam B prüft seinen cache:<br />
* im cache wird nichts gefunden: OSCam B sendet: NOK<br />
* im cache wird etwas gefunden; OSCam B sendet: OK+CW<br />
* im cache wird nichts gefunden aber es wird eine anstehende Anfrage festgestellt: ''cacheexwaittime'' in oscam.conf [global] wird abgewartet und dann erneut geprüft. OSCam B fragt nicht mehr nach neuen EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 2<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 2<br />
<br />
Wenn OSCam B ein CW erhält, wird es auf OSCam A geschoben. Der Reader hat normale Funktionen und kann ECMs anfragen.<br />
* Problem: OSCAM kann nur dann CW's auf OSCam A schieben, wenn OSCam A verbunden ist<br />
* Problem oder feature?: OSCam A kann ECMs von OSCam B anfragen<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 ist gesetzt auf cacheex = 3<br />
<br />
Wenn OSCam A ein CW erhält, wird dies auf OSCam B geschoben. OSCam A fragt nicht mehr nach neuen ECMs<br />
<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = Anzahl der hops<br />
= default = 10<br />
<br />
Festlegen der maximalen hops für cache exchange. Zum pushen des lokalen caches 1 eintragen. Der Eintrag cacheex_maxhop = 0 bewirkt nur, dass der default-Wert von 10 genommen wird.<br />
<br />
<br />
==== logport ====<br />
{{Optional}}<br />
Logport für einen '''Camd 3.x'''-Reader. UDP muss aktiviert sein. Funktioniert nur, wenn in Camd 3.x kein Cascading stattfindet!<br />
logport = Port-Nummer<br />
= # kein Logport (default)<br />
<br />
<br />
==== ecmwhitelist ====<br />
{{Optional}}<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
definiert die gültige ECM-Länge in '''hex''' und provid für physische Reader<br />
<br />
Beispiel:<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = keine (default) und provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Im normalen Betrieb ist dieser Parameter nicht erforderlich!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|Liste mit ECM-Längen]]'''<br />
<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
Gültige ECM-Header mit CAID und provid '''in hex''' einsetzen.<br />
<br />
default: none, provid = 000000<br />
<br />
Ein Thread dazu ist [[Streamboard-Thread:34748|hier]] zu finden.<br />
<br />
Und hier findet man eine ständig gepflegte [[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] .<br />
<br />
<br />
==== ratelimitecm ====<br />
{{Optional}}<br />
Anzahl der unterschiedlichen SIDs die in ECMs innerhalb eines Intervalls erlaubt sind<br />
ratelimitecm = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = Anzahl<br />
<br />
Anzahl der ECM's mit "not found" Anwort bis der Reader neu gestartet wird, 0 = kein Limit (default)<br />
<br />
<br />
==== resetcycle ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5821:08/12/2011</span><br />
<br />
Anzahl von ECM's bis ein Reset des Cardreaders durchgeführt wird<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
resetcycle = 5 # Reset nach 5 ECM's<br />
= 0 # ausgeschaltet [default]<br />
<br />
<br />
==== ratelimittime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
Intervall für ein ratelimit<br />
ratelimittime = Millisekunden<br />
= 0 # (default)<br />
<br />
<br />
==== ecmunique ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = ermöglicht eine Überprüfung des matching ECM hash im ratelimit slot<br />
0 = default<br />
<br />
<br />
==== srvidholdtime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
srvidholdtime = Millisekunden<br />
<br />
Zeitraum, in dem die Service-ID im ratelimit slot gehalten werden soll. Während dieses Zeitraums ist der Zeit-Check für ecmunique ausgeschaltet. Default = 0<br />
<br />
<br />
==== cooldowndelay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5946:09/09/2011</span><br />
<br />
cooldowndelay <br />
<br />
Erläuterung:<br />
delay = Verzögerungszeit in Sekunden, in der dem Reader erlaubt ist, mehr ECM-Anfragen zu stellen,<br />
als im Parameter "ratelimitecm" festgelegt ist<br />
default: [blank] keine<br />
duration = Zeitdauer in Sekunden, die der Reader für einen cooldown benötigt<br />
default: [blank] keine<br />
<br />
'''Voraussetzung ist, dass die Parameter "ratelimitecm" und "ratelimittime" ausgefüllt sind!'''<br />
<br />
<br />
==== block and save ====<br />
Zur Thematik block, save, select und write EMM gibt es hier [[http://www.streamboard.tv/wiki/EMM]] ein besonderes Wiki!<br />
<br />
<br />
===== blocknano =====<br />
{{Optional}}<br />
Liste zu blockender EMM-Nanos (in hex) oder aller EMM-Nanos. Gilt nur für physikalische Reader!<br />
<br />
Beispiel<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
<br />
===== blockemm-u =====<br />
{{Optional}}<br />
''unique address-EMMs, entspricht D3 bei Sk*''<br />
blockemm-u = 1 # Blocke EMMs, die an die Karte direkt adressiert sind)<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-s =====<br />
{{Optional}}<br />
''shared address-EMMs, entspricht D2 bei Sk*''<br />
blockemm-s = 1 # Blocke EMMs, die an bestimmte Gruppen von Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-g =====<br />
{{Optional}}<br />
''global address-EMMs, entspricht D0 bei Sk*''<br />
blockemm-g = 1 # Blocke EMMs, die an alle Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-unknown =====<br />
{{Optional}}<br />
Blockiert alle unbekannten Arten von EMM<br />
blockemm-unknown = 1 # Blocke alle unbekannten Arten von EMMs<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-bylen =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8615:04/12/2013</span><br />
<br />
Blockiere alle Arten von EMMs anhand der Länge. Es werden maximal 10 Werte zugelassen.<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
= # [blank] keine Blockierung (default)<br />
<br />
Beispiel:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br />
===== via_emm_global =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9843:09/05/2014</span><br />
<br />
via_emm_global = 0|1<br />
<br />
ermöglicht die Filterung von globalen emm für '''viacces'''<br />
<br />
'''ausschließlich für camd35 (cs357x) Protokoll!'''<br />
<br />
0 = default<br />
<br />
<br />
===== saveemm-u =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unique-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-u = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-s =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere shared-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-s = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-g =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere global-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-g = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-unknown =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unknown-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-unknown = 1<br />
= 0 # (default)<br />
<br />
<br />
===== savenano =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn5947:09/09/2011</span><br />
<br />
Liste von EMM-Nanos, die gespeichert werden sollen (hex) oder alle EMM-Nanos. Der Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
<br />
===== readnano =====<br />
{{Optional}}<br />
Schreibt ein File (üblicherweise eine Copy des von savenano gesicherten files) in die SC. Wenn kein Pfad angegeben ist, wird danach im Konfigurations-Verzeichnis gesucht. <br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
readnano = /var/oscam/write.emm # Beispiel Pfad/Dateiname<br />
= write.emm # Nur Dateiname<br />
= # [blank] es wird kein File geschrieben (default)<br />
<br />
<br />
==== use-ssl ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
use_ssl = 1 # benutze SSL für ghttp protocol<br />
= 0 # default<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # weise falsche CW's zurück, sende "not found" an Stelle falscher CWs<br />
= 0 # default<br />
<br />
Die Option hat nur eine Wirkung auf dem oscam Server (oscam.server, [reader]), der die Karte direkt anspricht, also nicht auf einem Client. Betroffene Karten: CSAT (0100:003311)<br />
<br />
<br />
==== disablecrccws ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # unterdrücke den cw-checksum-test<br />
= 0 # cw-checksum-test eingeschaltet (default)<br />
<br />
Hier mal eine Erklärung von Bit aus dem SB:<br />
<br />
Das ist für den dänischen Provider BoxerTV.<br />
Die haben Gegenmassnahmen eingeleitet und die VIA Karten verdauen keine Checksum-korrigierten CWs mehr. Damit kann man die CW checksummenkorrektur bei diesen readern ausschalten.<br />
Dann geht's wieder bei BoxerTV-readern.<br />
(dropbadcws muss dann auf aus sein).<br />
...<br />
PS: die checksummenkorrektur ausschalten ist böse und entgegen des DVB-Standards! Benutzt diesen Parameter nur wenn Ihr ihn wirklich benötigt!<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID<br />
<br />
Exemple :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
<br />
==== lb_weight ====<br />
{{Optional}}<br />
Je höher dieser Wert, desto größer ist die Wahrscheinlichkeit, dass dieser Reader ausgesucht wird. Es ist ein Indikator für die durchschnittliche Antwortzeit innerhalb des Loadbalancing<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
<br />
Abwärts die durchschnittliche Antwortzeit des Readers. Von rechts nach links der Wert lb_weight. <br />
Im Mittelfeld könnt Ihr ablesen, wie die durchschnittliche Antwortzeit durch den lb_weight wert "korrigiert" wird.<br />
<br />
<br />
'''Beispiel:'''<br />
<br />
Du hast 2 Reader die beide eine durchschnittliche Antwortzeit von 400ms haben. Nun möchtest Du aber einen Reader bevorzugen indem Du dem Loadbalancer 300ms vorgaukeln willst.<br />
<br />
Also suchst Du die Zeile die mit 400 beginnt und wanderst auf dieser Zeile nach rechts bis du bei ~300 (in der tabelle findest du nur 30cool bist. Dann liest Du oben den Wert für lb_value ab den der Reader bekommt (130). Diesen trägst Du bei dem Reader ein und schon wird der Reader bevorzugt<br />
<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional}}<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
Zuordnung von Services an den Reader, welche durch den Loadbalancer nie geblockt werden sollen, default=none<br /><br />
<br />
<br />
==== lb_force_fallback ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = setzt den Reader ständig in fallback-modus für das load balancing ohne Berücksichtigung der reader statistics,<br /><br />
0 = default<br />
<br />
<br />
==== ccc ====<br />
===== cccversion =====<br />
{{Depends}}<br />
'''Nur für CCcam'''<br />
<br />
Definiert die Version von CCcam, die verwendet werden soll.<br />
<nowiki><mainversion>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
cccversion = 1.2.34<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
===== cccmaxhops =====<br />
{{Depends}}<br />
Legt das Maximum an Distance-Hops für die Karte fest<br />
0 = Nur lokale Karte<br />
1 = Lokale Karte + 1 Hop<br />
2 = Lokale Karte + 2 Hops<br />
und so weiter<br />
Default-Wert = 10<br />
<br />
<br />
===== ccchop =====<br />
{{Depends}}<br />
ccchop = hop<br />
<br />
Setzt den hop für '''nicht'''-cccam-reader<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Definiert den reshare-hop für CCcam-Reader<br />
<br />
cccreshare = hop<br />
= -1 # kein reshare<br />
= 0 # reshare für direct peer <br />
= 1 # reshare für direct peer und den nächsten Level<br />
= x # reshare für direct peer und die nächsten x (Anzahl) Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
===== cccwantemu =====<br />
{{Depends}}<br />
Anfrage, auch einen emu vom CCcam-Server zu erhalten.<br />
cccwantemu = 1 # ja<br />
= 0 # nein default<br />
<br />
<br />
===== ccckeepalive =====<br />
{{Depends}}<br />
Sendet eine "keepalive-message", um eine Verbindung zum remote CCCam-Server zu erhalten.<br />
ccckeepalive = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
===== cccreconnect =====<br />
{{Optional}}<br />
cccreconnect = timeout (ms)<br />
<br />
default = 12000 (ms)<br />
<br />
Wiederverbindung nach ECM-Request-Timeout in Millisekunden.<br />
Gilt nur für O-cccam reader, für cccam-ext Protokoll wird diese Zeit ignoriert.<br />
<br />
<br />
===== cccmindown =====<br />
{{Depends}}<br />
cccmindown = # Zahl<br />
= 0 default<br />
<br />
Filtert alle Reader mit hops, die kleiner sind als die eingesetzte Zahl<br />
<br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBOX läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
===== device =====<br />
{{Mandatory}}<br />
device = Komma-separierte Liste mit den Werten<br />
<br />
peer's IP oder Hostname<br />
peer's port<br />
<br />
Beispiel:<br />
device = 192.168.1.101,3820<br />
<br />
<br />
===== password =====<br />
{{Mandatory}}<br />
password = 4 hex bytes, 8 chars<br />
<br />
Peer Passwort<br />
<br />
Beispiel:<br />
password = A123BCDE<br />
<br />
===== gbox_reshare =====<br />
{{Optional}}<br />
Reshare-Level für lokale Karte(n), default = 2<br />
<br />
===== gbox_max_distance =====<br />
{{Optional}}<br />
gbox_max_distance = maximale Distanz zum Empfang von peer-cards, default = 2<br />
<br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional}}<br />
gbox_max_ecm_send = sende ecm zu maximal n peer cards, default = 3<br />
<br />
<br />
===== user =====<br />
{{Mandatory}}<br />
Benutzername (client) der oscam Gbox<br />
<br />
Beispiel<br />
user = gbox_client<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
'''Der user muss auch in der oscam.user als [account] eingetragen werden.'''<br />
<br />
'''Man sollte unbedingt für jeden gbox [reader] einen anderen user [account] benutzen.'''<br />
'''Nur dann sind die Peers im Log usw unterscheidbar.'''<br />
<br />
'''Unter [reader] und [account] sollten geeignete Filter gesetzt werden (services=, caid=, ident=), um Instabilitäten der GBOX durch<br />
'''Überfluten mit Karten zu vermeiden.'''<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13490
OSCam/en/Config/oscam.server
2018-12-17T13:56:22Z
<p>Felixka: /* detect */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via a serial device (UART /SCI) handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password = 4 hex bytes, 8 chars<br />
<br />
peer password<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_client<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''gbox user must also be inserted in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer responses<br />
<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] and [account] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Reshare-Level of local card(s), default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 3<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to send into gbox network<br />
<br />
cccam_reshare = level default = 2<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/de/Config/oscam.server&diff=13489
OSCam/de/Config/oscam.server
2018-12-16T20:28:25Z
<p>Felixka: /* gbox_reshare */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== '''oscam.server''' ==<br />
Diese Konfigurationsdatei enthält Reader-Parameter für OSCam. Die Abschnitte dürfen sich wiederholen (mehr als ein Reader möglich). Es muss aber in jedem Fall mindestens ein reader konfiguriert sein!<br />
<br />
Beispiel-Konfiguration für die wichtigsten Reader sind hier zu finden [[OSCam/de/examples/Reader|Beispiel-Konfigurationen]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
<br />
=== '''Reader''' ===<br />
'''Grundsatz:''' Es können mehrere [reader]-Abschnitte erstellt werden. Jeder vollständige Abschnitt wird dann als Reader verwendet. Er '''muss''' immer mit [reader] beginnen. Im Parameter "label" kann dann die Art des Readers beschrieben werden:<br />
<br />
Beispiele: easymouse, phönix, smargo, sc8in1 usw.<br />
<br />
<br />
==== label ====<br />
{{Mandatory}}<br />
<br />
Legt den Namen für diesen Reader fest.<br />
<br />
'''Der Name des Labels darf nicht identisch zu einem Usernamen (oscam.users) sein!'''<br />
<br />
<br />
Beispiel<br />
label = easymouse2<br />
<br />
<br />
==== enable ====<br />
{{Optional}}<br />
Reader aktivieren/deaktivieren<br />
enable = 0 # Reader aus<br />
= 1 # Reader ein (default)<br />
<br />
==== description ====<br />
{{Optional}}<br />
description = Text <br />
<br />
Beliebiger Text zur Beschreibung des readers; default: [blank] keine Beschreibung<br />
<br />
'''Nicht zu verwechseln mit ''label''!''' Hier kann zusätzlich eine Information hinterlegt werden, z.B. Reader nur für CI+ usw.<br />
<br />
<br />
==== protocol ====<br />
{{Mandatory}}<br />
Kommunikationsprotokoll für den Reader.<br />
protocol = mouse # (Lokaler Cardreader)<br />
= internal # (Alle Cardreader mit einem "Device=/dev/sciX", sowie interne Coolstream-Reader)<br />
= camd35|cs357x # (Cascading - camd 3.5-kompatibler Remote-Server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x # (camd 3.5-kompatibler Remote-Server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1 # (SC8in1 und MCR 4/8 Cardreader)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''smartreader:''' Es können Probleme auftreten, wenn der Cardreader im smartreader-Modus in einem USB-Hub betrieben wird.<br />
In diesem Fall den Cardreader direkt am PC/Receiver einstecken und erneut testen.<br />
Sollte es dann funktionieren, ggf. einen anderen USB-Hub besorgen.<br />
<br />
<br />
==== device ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8911:09/10/2013</span><br />
<br />
Legt den local oder remote reader Abschnitt [reader] fest:<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw <br />
<br />
Bestimmt den reader type:<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3 <br />
bus:device: Bus- und Device-Namen von Smartreader+ oder Infinity USB (mit lsusb 'Bus' und 'Device' holen)<br />
serialnum: Serial-Nummer des Smartreader+ oder Infinity USB<br />
device: Name der Device<br />
device:slot: device name und slot-nummer '''für sc8in1''' (1-8)<br />
'''Es wird nur ein SC8in1 unterstützt!'''<br />
ip|hostname: IP-Adresse oder Hostname<br />
port: TCP/IP port <br />
lport: Remapping für den Local-Port (TCP/IP)<br />
PCSC: Nummer des PCSC-Readers (mit 0 starten!)<br />
Alternativ kann über den Namen des Readers (bzw. einen Teil davon) selektiert werden, z.B. "-1:SCR 3310" (Namen der erkannten Reader werden bei "oscam -d 32" ausgegeben)<br />
0|1: '''Nur für die Coolstream HD-1''' (Reader 0 oder 1 auswählen)<br />
constantcw: Dateiname für das Constant-CW-File<br />
<br />
Format des CW-Files: <br />
'''Standard-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
Beispiel:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
Beispiele für device--parameter:<br />
device = /dev/ttyS0 # Reader an COM1 (bei Linux i386 und Windows)<br />
device = /dev/tts/1 # Reader an COM2 (Linux dbox2 mit multicam)<br />
device = /dev/ttyUSB0 # Reader an USB (Linux i386)<br />
device = Serial:Reader 1 # z.B. Smargo im smartreader-Modus, wobei die Kennung "Reader 1" der Smargo-Konfiguration zu entnehmen ist!<br />
device = /var/keys/constant.cw # Einbindung eines constantcw<br />
device = /dev/ttyUSB0:1 # Slot 1 eines SC8in1 oder MCR 4/8 (Linux i386)<br />
<br />
'''Hinweis:''' Der Zähler für die Device liegt immer um 1 hinter der Nummer des COM-Ports! Also ttyS0 = COM1, tts/1 = COM2. Bei Benutzung neuerer PC sind kaum noch serielle Anschlüsse vorhanden, sodass in diesen Fällen USB 2.0 benutzt werden muss. Hier am besten im Gerätemanager des PC nachschauen, welcher COM-Port dem Reader zugewiesen wurde und in die Device den Port -1 eintragen!<br />
<br />
==== detect ====<br />
{{Depends}}<br />
Der Card Status (Karte im Reader oder entfernt) wird detektiert mit Hilfe einer UART handshake input Leitung - cd, cts, dsr oder ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* "none" bedeutet: Keine Leitung zum detektieren des Card Status vorhanden. Karte wird immer als gesteckt im Kartenleser erkannt.<br />
<br />
* Falls das detect signal invertiert ist: prefix "!" (eg "detect = !cts")<br />
<br />
<br />
Falls Parameter '''use_gpio = 1''' gesetzt ist:<br />
<br />
detect = gpio1...gpio7 - Card Status wird über einen gpio erfasst. GPIO means "general purpose input output". <br />
<br />
<br />
Beispiel:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
'''protocol = mouse'''<br />
'''device = /dev/ttyUSB0''' (easymouse 2)<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends}}<br />
Benutze gpio als card detect/ reset. Siehe auch '''detect ='''<br />
use_gpio = 0|1 #default = 0<br />
<br />
==== cardmhz ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
'''Standard'''-Frequenz der Karte in Schritten von 10 KHz. Für Irdeto-Karten z.B. "cardmhz = 600" (6 Mhz)<br />
<br />
Beispiel:<br />
cardmhz = 600 # Irdetokarte<br />
= # [blank] Default-Wert 357<br />
<br />
'''Interne-Dreambox-Leser'''<br />
<br />
Wenn cardmhz >2000 eingetragen wird aktiviert OScam den PLL-Clock. Interne-Dreambox-Leser (Dream Multimedia GmbH und Clones) können damit optimal getaktet werden.<br />
<br />
Der verwendete cardmhz-wert entspricht dem höchsten PLL-Takt. OSCam wird dann den optimalen PLL-Teiler berechnen damit die Frequenz möglichst nahe an den Wert kommt welcher bei "mhz" definiert wurde.<br />
<br />
Benutze die folgenden Einstellungen:<br />
<br />
Modelle mit PPC-CPU (DM500/DM600/DM7000/DM7020): "cardmhz = 3150"<br />
<br />
Modelle mit MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.): "cardmhz = 2700"<br />
<br />
Die DM7025 ist speziell: "cardmhz = 8300"<br />
<br />
'''Wird nur der Parameter cardmhz gesetzt (ohne mhz = xxx) wird die Karte automatisch anhand des ATR getaktet!'''<br />
<br />
Beispiel:<br />
Du hast eine Dream 800 HD PVR, das ist eine MIPS, daher muss du "cardmhz = 2700" setzen. Nehmen wir an du hast eine Nagra-Karte welche auf 5 MHz laufen soll.<br />
Wenn du die Karte richtig takten willst verwende "cardmhz = 2700" und "mhz = 500", Oscam taktet die Karte dann mit der nächst möglichen Frequenz (4.50 Mhz).<br />
Möchtest du sie übertakten, dann verwende "cardmhz = 2700" und z.B. "mhz = 900".<br />
Deine Karte läuft nun auf 9 Mhz. Aber vorsichtig, eine übertaktete Karte kann heiss und instabil werden! ([[OSCam/de/examples/Overclocking|Overclocking]] beachten!)<br />
<br />
Viele Interne-Leser von anderen Herstellern als Dream ignorieren die eingestellten Werte! Aber du solltest "cardmhz" und mhz" trotzdem setzen da es zum berechnen der richtigen "timings" verwendet wird. Wenn du cardmhz/mhz richtig setzt ist das "timing" besser für die aktuelle (automatisch gesetzte) Frequenz des Internen-Lesers. Als Ergebnis bekommst du bessere ECM-Zeiten oder mehr Stabilität.<br />
<br />
Erwarte keine Wunder, nur ein übertakten der Karte bringt bessere ECM-Zeiten. Schlechtes "timing" kann jedoch zu verzögerungen führen oder die Karte instabil machen.<br />
<br />
'''Nützliche Links:'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|Liste verschiedener Karten und ihren Frequenzen]]'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
==== mhz ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn9099:12/13/13</span><br />
<br />
mhz = Frequenz in KHz<br />
<br />
Sofern dies technisch möglich ist kann abweichend von '''cardmhz''' die Frequenz des Kartenlesers anders (in der Regel höher) als die Standard-Frequenz der Karte eingestellt werden (in 10 KHz-Schritten). Man spricht dann von [[OSCam/de/examples/Overclocking|Overclocking]]. So kann z.B. eine S02-Karte (Standard 6 MHz) mit 10 MHz übertaktet werden.<br />
<br />
Beispiel Externe-Reader:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
Beispiel DM800:<br />
cardmhz = 2700 # (27MHz PLL)<br />
mhz = 900 # (Wert wird berechnet -> 27Mhz : 3 = 9 Mhz)<br />
<br />
Hier eine ausführlichere Beschreibung von '''stefansat''' aus der Distri-Doku:<br />
<br />
Wenn die Frequenz in '''mhz''' größer ist als in '''cardmhz''', dann befindest Du dich im [[OSCam/de/examples/Overclocking|Overclocking]] Modus.<br />
<br />
Smargo-Reader und interne Reader der Dreamboxen werden durch den '''ATR''' automatisch eingestellt, wenn '''autospeed = 1''' (siehe nächsten Parameter) gesetzt ist.<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ReaderClocks|Liste verschiedener Hardware und ihren möglichen Frequenzen]]'''<br />
<br />
<br />
==== autospeed ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
1 = setzt den mhz-Wert anhand des ATR (default)<br />
0 = disabled<br />
<br />
<br />
==== deprecated ====<br />
{{Optional}}<br />
Zuerst wird die Smartcard im Normal-Modus initialisiert. Schlägt dies fehl, wird die Initialisierung automatisch auf den veralteten Modus umgeschaltet, so dass die Smartcard-Geschwindigkeit nicht verändert wird und die Kommunikation auf normaler ATR Geschwindigkeit von 9600 Baud bleibt.<br />
deprecated = 1 # ausschließlich veralteter Modus<br />
= 0 # default<br />
<br />
<br />
==== mode ====<br />
{{Depends}}<br />
[[Datei:WarningS.png|text-bottom]] '''Nur für AZBox'''<br />
<br />
mode = 1 # AzBox-Reader<br />
= 0 # default<br />
Setzt den Init-Mode für die Karte im internen AZBox-reader<br />
<br />
<br />
==== device_out_endpoint ====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8013:12/29/2012</span><br />
<br />
Setzt die Addresse des Endpunkts für FTDI-Chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
<br />
==== smargopatch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet den workaround für smargoreader+ und reader ein, bis der native mode funktioniert<br />
smargopatch = 1<br />
= 0 (default)<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6402:02/16/2012</span><br />
<br />
Schaltet fix für SC8in1/MCR DTR/RTS kernel bug ein<br />
sc8in1_dtrrts_patch = 1<br />
= 0 # (default)<br />
<br />
<br />
==== cool_timeout_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6286:01/23/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Setzt beim init der SC einen timeout in Millisekunden fest (im internen Reader).<br />
cool_timeout_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung: Nur für Coolstream!'''<br />
<br />
Hier kann ein timeout der SC für read/transmit nach dem init in Millisekunden festgelegt werden (nur für interne Reader).<br />
cool_timeout_after_init = timeout <br />
= 0 # default<br />
<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9568:03/16/2014</span><br />
<br />
Fügt einen Controll-Check für Pin Payload von NDS Videoguard Karten hinzu (4 Hex-Bytes). '''Gültig nur für physikalische Reader'''<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
<br />
==== ins7e ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5959:09/22/2011</span><br />
<br />
Füge 26 hex-bytes payload für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e = payload<br />
= # [blank] default (none)<br />
<br />
<br />
==== ins7e11 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6064:12/06/2011</span><br />
<br />
Füge TA1 für '''NDS Videogard 2''' Karten hinzu. '''Gültig nur für physikalische Reader'''<br />
ins7e11 = TA1 Byte<br />
= # [blank] default (none)<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
<br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9884:09/30/2014</span><br />
{{Optional}}<br />
schaltet den 0x07-EMM-Fix für NDS Videoguard 2 Karten ein. '''Gültig nur für physikalische Reader'''<br />
fix07 = 1 # 0x07-EMM-Fix eingeschaltet (default)<br />
= 0 # ausgeschaltet <br />
<br />
<br />
==== force_irdeto ====<br />
{{Optional}}<br />
Forciert den Irdeto-Modus, auch wenn ein RSA-Key für Irdeto getunnelte Nagravisions-Karte vorliegt.<br />
force_irdeto = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
==== nagra_read ====<br />
{{Optional}}<br />
Lese Nagravision-Records. '''Nur für NCMED-Karten'''<br />
nagra_read = 0 # ausgeschaltet (default)<br />
= 1 # lese alle Records mit abgelaufenen Rechten<br />
= 2 # lese nur Records mit gültigen Rechten<br />
<br />
<br />
==== rsakey ====<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn7046:06/12/12</span><br />
{{Optional}}<br />
<br />
RSA key für Nagravision/Tiger SCs / CAM key data für Irdeto SCs, Conax SCs<br />
rsakey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== fix9993 ====<br />
{{Optional}}<br />
fix9993 = 0|1<br />
<br />
Fixed den error 9993 bei CAID 0919 SC's<br />
<br />
fix9993 = 1 # eingeschaltet<br />
= 0 # ausgeschaltet (default)<br />
<br />
<br />
==== readtiers ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
Methode wie die Tiers von NDS Videoguard Smartcards ausgelesen werden.<br />
<br />
readtiers = 0 # ausgeschaltet (default)<br />
readtiers = 1 # ins70 (neue) Methode <br />
readtiers = 2 # ins76 (alte) Methode <br />
<br />
==== boxkey ====<br />
{{Optional}}<br />
Boxkey für Nagravision SCs / CAM key für Irdeto SCs<br />
boxkey = key<br />
= # [blank] default (none)<br />
<br />
<br />
==== pincode ====<br />
{{Optional}}<br />
Pincode für '''Conax-, Cryptoworks- und Viaccess-''' Karten.<br />
pincode = code<br />
= # [blank] default<br />
<br />
<br />
==== boxid ====<br />
{{Optional}}<br />
ID der '''NDS-Reciever-Box'''<br />
boxid = NDS box ID<br />
= # [blank] default<br />
<br />
<br />
==== ndsversion ====<br />
{{Optional}}<br />
Version von '''NDS Videoguard''' einsetzen<br />
ndsversion = 0 # autodetection (default)<br />
ndsversion = 1 # NDS Videoguard 1<br />
ndsversion = 12 # NDS Videoguard 1+<br />
ndsversion = 2 # NDS Videoguard 2<br />
<br />
<br />
==== aeskeys ====<br />
{{Optional}}<br />
Multiple AES-Keys für '''Viacces-Karten'''<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
Spezial AES Keys:<br />
00 = schicke keine CW zurück, es ist kein AES-Key spezifiziert<br />
FF = schicke CW zurück, die vom S empfangen wurden, es ist kein AES-Key spezifiziert<br />
<br />
Beispiel<br />
aeskeys = 0100@012345:000102030405060708090a0b0c0d0e0f;0200@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn6624;04/23/2012</span><br />
{{Optional}}<br />
Anzahl der Subscritions-Klassen für '''Viacces'''<br />
schowcls = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== key ====<br />
{{Depends}}<br />
Key für Newcamd remote reader encription<br />
key = DES key<br />
<br />
<br />
==== user ====<br />
{{Optional}}<br />
Username für Remote-Reader.<br />
<br />
Beispiel<br />
user = # xyxyx<br />
<br />
<br />
==== password ====<br />
{{Optional}}<br />
Passwort für Remote-Reader.<br />
<br />
Beispiel<br />
password = # xyxyx<br />
<br />
<br />
==== mg-encrypted ====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET - OBSOLETE - OBSOLÈTE - ANTIQUATO</span><br />
<br />
mgcamd encrypted line für '''GBox!'''<br />
<br />
Format:<br />
<br />
mg-encrypted = D: { <IP|hostname> { <local port> <remote port> { <password> { <level> <level> }}}}[,<local MAC address>] # default MAC address=eth0<br />
<br />
default:<br />
mg-encrypted = # [blank] (none)<br />
<br />
<br />
==== services ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' <br />
<br />
Wenn Loadbalancing aktiviert ist, sind folgende Besonderheiten zu berücksichtigen:<br />
* Services sind für den Loadbalancer eine '''Whitelist'''. Das bedeutet, dass alles, was hier eingetragen wird, vom Loadbalancing als Service behandelt wird, den die Karte '''kann'''! Wenn dann z.B. ein "not found" kommt, wird das ignoriert und die Karte wird weiter angefragt, mit dem damit verbundenen traffic!<br />
* Daraus ergibt sich, dass der Eintrag von Services bei '''lokalen''' Karten und Proxies, '''die man genau kennt''', kein Problem darstellt.<br />
* Anders verhält es sich bei Proxies (z.B. CCcam), deren Services '''man nicht kennt'''. Hier ist davon abzuraten, Services einzutragen. In einem solchen Fall sollten vielmehr die Services bestimmt werden, die '''nicht zu berücksichtigen''' sind (Eintrag mit (!)), oder besser eine Filterung über den Parameter '''caid''' erfolgen.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Die Anzahl der services, die je reader berücksichtigt werden, ist auf 64 begrenzt, also 64 mal [[service-name][CAID][provid][srvid]]! <br />
<br />
Welche Services kann der Reader. Hierzu muss eine oscam.services vorhanden sein. Die Logik ist hier folgendermaßen (in der angegebenen Reihenfolge):<br />
* Wenn das Feld leer ist (oder ungültig) wird die Anfrage erlaubt.<br />
* Wenn ein negativer Service (also solche mit "!") zutreffend ist, so wird die Anfrage abgewiesen.<br />
* Wenn ein positiver Service zutreffend ist oder es gar keinen positiven Service gibt, so wird die Anfrage erlaubt.<br />
* Wenn keiner der vorigen Punkte zutrifft, so wird die Anfrage abgewiesen.<br />
Dies bedeutet, dass negative Services nur in Einzelfällen nötig sind. Nämlich genau dann, wenn man positive Services hat, davon aber wieder einige ausnehmen will. Dies wird nicht empfohlen, da es hier schnell zu Fehlkonfigurationen kommt. Stattdessen sollte ein zusätzlicher Service angelegt werden, der alle entsprechenden Sender enthält.<br />
services = [!]services[,[!]<services>]...<br />
= [blank] ist default<br />
<br />
Beispiel<br />
services = skywelt,skyweltextra,!skyfilm<br />
# skywelt und skywelt extra sind zugeordnet, skyfilm ist ausgeschlossen<br />
<br />
<br />
==== caid ====<br />
{{Optional}}<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
definiert und mapped CAIDs für Reader<br />
<br />
Beispiele:<br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut für das Beispiel oben)<br />
default: alle CAIDs mit der Maske FFFF<br />
<br />
<br />
==== ident ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:''' Wenn in oscam.conf [global] unter lb_mode loadbalancing aktiviert ist, dann dürfen hier keine Einträge stehen!<br />
<br />
Definiert CAID und Ident '''kartenspezifisch''' für den Reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Beispiel<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] Keine Definition (default)<br />
<br />
<br />
==== class ====<br />
{{Optional}}<br />
Definiert Class '''in hexadecimal''' kartenspezifisch für den Reader:<br />
class = 01,02,!1b,!2b # 01 und 01 ja, 1b und 2b nein<br />
= # [blank] Keine Definition (default)<br />
<br />
<br />
==== chid ====<br />
{{Optional}}<br />
Definiert '''Irdeto'''-ChID für den Reader.<br />
<br />
Beispiel<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
<br />
==== group ====<br />
{{Mandatory}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn6103:12/21/2011</span><br />
<br />
Jeder Reader muss in einer oder mehrere Gruppen eingetragen sein. Damit lässt sich bestimmen, welcher Client auf welchen Reader Zugriff hat. Gültige Werte 1-64<br />
group = 1....64[,1....64]....<br />
<br />
'''Da ein Eintrag zwingend ist, darf hier kein [blank] als default stehen!'''<br />
<br />
Beispiel<br />
Group = 1 # (eine Gruppe)<br />
Group = 1,4,5 # (mehrere Gruppen)<br />
<br />
<br />
==== audisabled ====<br />
{{Optional}}<br />
Schließt den Reader vom AU (Auto-Updating) aus<br />
audisabled = 1 # ausgeschlossen<br />
= 0 # nicht ausgeschlossen (default)<br />
<br />
<br />
==== auprovid ====<br />
{{Optional}}<br />
Hier kann die Provider-ID festgelegt werden, damit der richtige Reader für das AU zur Verfügung steht<br />
<br />
Beispiel<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
<br />
==== disableserverfilter ====<br />
{{Optional}}<br />
Ignoriert CAID und Ident-Einstellungen des Readers bei fehlerhaften Clients.<br />
disableserverfilter = 1 # ignoriert<br />
= 0 # ignoriert nicht (default)<br />
<br />
<br />
==== inactivitytimeout ====<br />
{{Depends}}<br />
Für alle TCP-basierende remote Reader<br />
<br />
inactivitytimeout = # in Sekunden<br />
= -1 # Verbindet '''newcamd''' basierende Reader bei einem Netzwerkausfall erneut (auch im Leelauf - idle -)<br />
= 0 # default<br />
<br />
<br />
==== reconnecttimeout ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn 7244:08/07/2012</span><br />
<br />
Zeitspanne in Sekunden für eine Wiederverbindung mit einem Remote-Reader, wenn Antworten ausbleiben<br />
<br />
Beispiel<br />
reconnecttimeout = 20 # Nach 20 Sekunden ohne Antworten wird wiederverbunden<br />
= # [blank] default 30 Sekunden<br />
<br />
<br />
==== connectoninit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = Ermöglicht die Herstellung einer Newcamd-Verbindung, solange noch kein Request vorliegt<br />
0 = default<br />
<br />
<br />
==== keepalive ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = ermöglicht es einem cs378x TCP socket, ständig verbunden zu sein<br />
0 = Immer eingeschaltet bei einem cacheex reader type (default)<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional}}<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
<br />
Gilt nicht, wenn Loadbalancing aktiviert ist!<br />
<br />
Definiert diesen Reader als Fallback. Standard- und Fallback-Reader müssen in der selben Gruppe sein. Siehe '''group'''!<br />
fallback = 1 # Fallbackreader<br />
= 0 # Kein Fallbackreader (default)<br />
<br />
'''Info:'''<br />
<br />
Ist Loadbalancing aktiviert, und zusätzlich der Parameter "cwcycle_allowbadfromffb = 1", wird dieser Reader ein fixed Fallback für CacheEx.<br />
Somit wird er verwendet wenn ein Bad Cycle erkannt wird, damit freetzer entsprechend verhindert werden können.<br />
--> siehe [[OSCam/de/Config/oscam.conf#cwcycle_allowbadfromffb|cwcycle_allowbadfromffb]]<br />
<br />
<br />
==== fallback_percaid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
Benutze den Reader nur als fallback für vorher definierte CAIDs, two-digit wildcards sind möglich. Dieser Parameter überschreibt den Parameter fallback!<br />
Default = none<br />
<br />
Beispiel:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional}}<br />
Definition des EMM-Caches für den Reader. Derzeit nur für lokale Reader. Betrifft die AU-Funktion. Damit kann entschieden werden, ob Update-Kommandos (EMM) vom Provider immer oder nur unter bestimmten Voraussetzungen geschrieben werden.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
Ohne diesen Parameter werden keine EMM im Log angezeigt!<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # cache/stats aus (default)<br />
* <usecache> 1 = # cache/stats ein und schreibe sie in eine Datei wenn oscam beendet wird<br />
* <usecache> 2 = # cache/stats ein, aber schreibe sie beim beenden von oscam <ins>nicht</ins> in eine Datei<br />
<br />
* <rewrite> n = # Wie oft ein und das selbe Update-Kommando (EMM) geschrieben wird. ''Gilt nur bei <usecache> = 1 oder 2''<br />
<br />
* <logging> 0 = # Einträge im Logfile ausgeschaltet (default)<br />
* <logging> 1 = # Nur fehlerhafte EMM werden geloggt<br />
* <logging> 2 = # die geschriebenen (written) EMM werden geloggt<br />
* <logging> 4 = # die zurückgewiesenen (skipped) EMM werden geloggt<br />
* <logging> 8 = # die blockierten (blocked) EMM werden geloggt<br />
* <logging> 16 = # disabled AU werden geloggt<br />
Aufsummieren der Werte ist möglich, 31 wird also alle loggen.<br />
<br />
* <stb-emm> 0 = # EMM für die STB werden ignoriert (default)<br />
* <stb-emm> 1 = # EMM für die STB werden zum Reader gesendet (nur sehr spezifisch nötig)<br />
<br />
Beispiele:<br />
emmcache = 1,3,10,0 # Cache ein, 3 x schreiben, die geschriebenen (2) und die geblockten (8) = 10 loggen, keine stb-emm senden<br />
emmcache = 1,2,6,1 # Cache ein, 2 x schreiben, die geschriebenen (2) und die zurückgewiesenen (4) = 6 loggen, stb-emm senden<br />
<br />
'''stb-emm''': ist nur für einige Viaccess-User sinnvoll (siehe Commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) und '''bestimmt nicht für User mit einer echten Karte im Reader'''.<br />
<br />
Dazu [http://www.streamboard.tv/wbb2/thread.php?postid=538345#post538345 noch ein Zitat vom User ''pr2'']: "In Viaccess sahen wir einige EMM-G, die für die Set-Top-Box(STB) waren und nicht für die Karte, deshalb nennen wir das STB-EMM. Diese EMMs setzen den Overencryption-Key (AES) in der STB für die Verschlüsselung der Kommunikation zwischen STB und Karte."<br />
<br />
<br />
==== emmreassembly ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn8591:04/01/2013 Parameter jetzt in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = schaltet Neuaufbau von EMM ein, default<br />
0 = schaltet Neuaufbau von EMM aus<br />
<br />
Sollte bei '''Viaccess und Cryptoworks Readern''' gesetzt werden, wenn der Client, der für das Senden von EMMs benutzt wird, die EMMs neu aufbaut anstelle sie an OScam zur Bearbeitung zu senden.<br />
<br />
<br />
==== cacheex ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
cacheex = 1 # enable cache exchange pull mode<br />
cacheex = 2 # enable cache exchange push mode<br />
cacheex = 3 # enable cache exchange revers push mode<br />
cacheex = 0 # aus (default)<br />
<br />
Identische modes müssen bei local OSCam server und remote OSCam user account gesetzt werden!<br />
Nur für camd3.5x und CCcam Protokolle!<br />
<br />
Siehe auch entsprechenden Parameter in oscam.user!<br />
<br />
[[Datei:MessageS.png|text-bottom]]'''Ein ausführliches How-To findet man [[Streamboard-Post:406230|hier]]'''<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 1<br />
<br />
OSCam A erhält eine ECM Anfrage, reader1 sendet diese Anfrage an OSCam B,<br />
<br />
OSCam B prüft seinen cache:<br />
* im cache wird nichts gefunden: OSCam B sendet: NOK<br />
* im cache wird etwas gefunden; OSCam B sendet: OK+CW<br />
* im cache wird nichts gefunden aber es wird eine anstehende Anfrage festgestellt: ''cacheexwaittime'' in oscam.conf [global] wird abgewartet und dann erneut geprüft. OSCam B fragt nicht mehr nach neuen EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 ist gesetzt auf cacheex = 2<br />
<br />
OSCam B account1 ist gesetzt auf cacheex = 2<br />
<br />
Wenn OSCam B ein CW erhält, wird es auf OSCam A geschoben. Der Reader hat normale Funktionen und kann ECMs anfragen.<br />
* Problem: OSCAM kann nur dann CW's auf OSCam A schieben, wenn OSCam A verbunden ist<br />
* Problem oder feature?: OSCam A kann ECMs von OSCam B anfragen<br />
<br />
CW-flow = B ---> A<br />
<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 ist gesetzt auf cacheex = 3<br />
<br />
Wenn OSCam A ein CW erhält, wird dies auf OSCam B geschoben. OSCam A fragt nicht mehr nach neuen ECMs<br />
<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = Anzahl der hops<br />
= default = 10<br />
<br />
Festlegen der maximalen hops für cache exchange. Zum pushen des lokalen caches 1 eintragen. Der Eintrag cacheex_maxhop = 0 bewirkt nur, dass der default-Wert von 10 genommen wird.<br />
<br />
<br />
==== logport ====<br />
{{Optional}}<br />
Logport für einen '''Camd 3.x'''-Reader. UDP muss aktiviert sein. Funktioniert nur, wenn in Camd 3.x kein Cascading stattfindet!<br />
logport = Port-Nummer<br />
= # kein Logport (default)<br />
<br />
<br />
==== ecmwhitelist ====<br />
{{Optional}}<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
definiert die gültige ECM-Länge in '''hex''' und provid für physische Reader<br />
<br />
Beispiel:<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = keine (default) und provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Im normalen Betrieb ist dieser Parameter nicht erforderlich!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|Liste mit ECM-Längen]]'''<br />
<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
Gültige ECM-Header mit CAID und provid '''in hex''' einsetzen.<br />
<br />
default: none, provid = 000000<br />
<br />
Ein Thread dazu ist [[Streamboard-Thread:34748|hier]] zu finden.<br />
<br />
Und hier findet man eine ständig gepflegte [[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] .<br />
<br />
<br />
==== ratelimitecm ====<br />
{{Optional}}<br />
Anzahl der unterschiedlichen SIDs die in ECMs innerhalb eines Intervalls erlaubt sind<br />
ratelimitecm = Anzahl<br />
= 0 # (default)<br />
<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = Anzahl<br />
<br />
Anzahl der ECM's mit "not found" Anwort bis der Reader neu gestartet wird, 0 = kein Limit (default)<br />
<br />
<br />
==== resetcycle ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5821:08/12/2011</span><br />
<br />
Anzahl von ECM's bis ein Reset des Cardreaders durchgeführt wird<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
resetcycle = 5 # Reset nach 5 ECM's<br />
= 0 # ausgeschaltet [default]<br />
<br />
<br />
==== ratelimittime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
Intervall für ein ratelimit<br />
ratelimittime = Millisekunden<br />
= 0 # (default)<br />
<br />
<br />
==== ecmunique ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = ermöglicht eine Überprüfung des matching ECM hash im ratelimit slot<br />
0 = default<br />
<br />
<br />
==== srvidholdtime ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9078:09/12/2013</span><br />
<br />
srvidholdtime = Millisekunden<br />
<br />
Zeitraum, in dem die Service-ID im ratelimit slot gehalten werden soll. Während dieses Zeitraums ist der Zeit-Check für ecmunique ausgeschaltet. Default = 0<br />
<br />
<br />
==== cooldowndelay ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5946:09/09/2011</span><br />
<br />
cooldowndelay <br />
<br />
Erläuterung:<br />
delay = Verzögerungszeit in Sekunden, in der dem Reader erlaubt ist, mehr ECM-Anfragen zu stellen,<br />
als im Parameter "ratelimitecm" festgelegt ist<br />
default: [blank] keine<br />
duration = Zeitdauer in Sekunden, die der Reader für einen cooldown benötigt<br />
default: [blank] keine<br />
<br />
'''Voraussetzung ist, dass die Parameter "ratelimitecm" und "ratelimittime" ausgefüllt sind!'''<br />
<br />
<br />
==== block and save ====<br />
Zur Thematik block, save, select und write EMM gibt es hier [[http://www.streamboard.tv/wiki/EMM]] ein besonderes Wiki!<br />
<br />
<br />
===== blocknano =====<br />
{{Optional}}<br />
Liste zu blockender EMM-Nanos (in hex) oder aller EMM-Nanos. Gilt nur für physikalische Reader!<br />
<br />
Beispiel<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
<br />
===== blockemm-u =====<br />
{{Optional}}<br />
''unique address-EMMs, entspricht D3 bei Sk*''<br />
blockemm-u = 1 # Blocke EMMs, die an die Karte direkt adressiert sind)<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-s =====<br />
{{Optional}}<br />
''shared address-EMMs, entspricht D2 bei Sk*''<br />
blockemm-s = 1 # Blocke EMMs, die an bestimmte Gruppen von Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-g =====<br />
{{Optional}}<br />
''global address-EMMs, entspricht D0 bei Sk*''<br />
blockemm-g = 1 # Blocke EMMs, die an alle Karten gehen<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-unknown =====<br />
{{Optional}}<br />
Blockiert alle unbekannten Arten von EMM<br />
blockemm-unknown = 1 # Blocke alle unbekannten Arten von EMMs<br />
= 0 # nicht blocken (default)<br />
<br />
<br />
===== blockemm-bylen =====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8615:04/12/2013</span><br />
<br />
Blockiere alle Arten von EMMs anhand der Länge. Es werden maximal 10 Werte zugelassen.<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
= # [blank] keine Blockierung (default)<br />
<br />
Beispiel:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br />
===== via_emm_global =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9843:09/05/2014</span><br />
<br />
via_emm_global = 0|1<br />
<br />
ermöglicht die Filterung von globalen emm für '''viacces'''<br />
<br />
'''ausschließlich für camd35 (cs357x) Protokoll!'''<br />
<br />
0 = default<br />
<br />
<br />
===== saveemm-u =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unique-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-u = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-s =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere shared-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-s = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-g =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere global-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-g = 1<br />
= 0 # (default)<br />
<br />
<br />
===== saveemm-unknown =====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn5947:09/09/2011</span><br />
<br />
Sichere unknown-EMM's in Datei, deren Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
saveemm-unknown = 1<br />
= 0 # (default)<br />
<br />
<br />
===== savenano =====<br />
{{Optional}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">VERALTET svn5947:09/09/2011</span><br />
<br />
Liste von EMM-Nanos, die gespeichert werden sollen (hex) oder alle EMM-Nanos. Der Pfad kann mit "emmlogdir=" in der oscam.conf festgelegt werden (Default=Config-Ordner).<br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
<br />
===== readnano =====<br />
{{Optional}}<br />
Schreibt ein File (üblicherweise eine Copy des von savenano gesicherten files) in die SC. Wenn kein Pfad angegeben ist, wird danach im Konfigurations-Verzeichnis gesucht. <br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hinweis:''' Nur gültig für physikalische Reader!<br />
readnano = /var/oscam/write.emm # Beispiel Pfad/Dateiname<br />
= write.emm # Nur Dateiname<br />
= # [blank] es wird kein File geschrieben (default)<br />
<br />
<br />
==== use-ssl ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
use_ssl = 1 # benutze SSL für ghttp protocol<br />
= 0 # default<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # weise falsche CW's zurück, sende "not found" an Stelle falscher CWs<br />
= 0 # default<br />
<br />
Die Option hat nur eine Wirkung auf dem oscam Server (oscam.server, [reader]), der die Karte direkt anspricht, also nicht auf einem Client. Betroffene Karten: CSAT (0100:003311)<br />
<br />
<br />
==== disablecrccws ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # unterdrücke den cw-checksum-test<br />
= 0 # cw-checksum-test eingeschaltet (default)<br />
<br />
Hier mal eine Erklärung von Bit aus dem SB:<br />
<br />
Das ist für den dänischen Provider BoxerTV.<br />
Die haben Gegenmassnahmen eingeleitet und die VIA Karten verdauen keine Checksum-korrigierten CWs mehr. Damit kann man die CW checksummenkorrektur bei diesen readern ausschalten.<br />
Dann geht's wieder bei BoxerTV-readern.<br />
(dropbadcws muss dann auf aus sein).<br />
...<br />
PS: die checksummenkorrektur ausschalten ist böse und entgegen des DVB-Standards! Benutzt diesen Parameter nur wenn Ihr ihn wirklich benötigt!<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID<br />
<br />
Exemple :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
<br />
==== lb_weight ====<br />
{{Optional}}<br />
Je höher dieser Wert, desto größer ist die Wahrscheinlichkeit, dass dieser Reader ausgesucht wird. Es ist ein Indikator für die durchschnittliche Antwortzeit innerhalb des Loadbalancing<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
<br />
Abwärts die durchschnittliche Antwortzeit des Readers. Von rechts nach links der Wert lb_weight. <br />
Im Mittelfeld könnt Ihr ablesen, wie die durchschnittliche Antwortzeit durch den lb_weight wert "korrigiert" wird.<br />
<br />
<br />
'''Beispiel:'''<br />
<br />
Du hast 2 Reader die beide eine durchschnittliche Antwortzeit von 400ms haben. Nun möchtest Du aber einen Reader bevorzugen indem Du dem Loadbalancer 300ms vorgaukeln willst.<br />
<br />
Also suchst Du die Zeile die mit 400 beginnt und wanderst auf dieser Zeile nach rechts bis du bei ~300 (in der tabelle findest du nur 30cool bist. Dann liest Du oben den Wert für lb_value ab den der Reader bekommt (130). Diesen trägst Du bei dem Reader ein und schon wird der Reader bevorzugt<br />
<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional}}<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
Zuordnung von Services an den Reader, welche durch den Loadbalancer nie geblockt werden sollen, default=none<br /><br />
<br />
<br />
==== lb_force_fallback ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = setzt den Reader ständig in fallback-modus für das load balancing ohne Berücksichtigung der reader statistics,<br /><br />
0 = default<br />
<br />
<br />
==== ccc ====<br />
===== cccversion =====<br />
{{Depends}}<br />
'''Nur für CCcam'''<br />
<br />
Definiert die Version von CCcam, die verwendet werden soll.<br />
<nowiki><mainversion>.<version>.<sub version></nowiki><br />
<br />
Beispiel<br />
cccversion = 1.2.34<br />
<br />
Hier eine ausführliche Erklärung von '''corsair''' zu diesem Thema:<br />
<br />
* die CCCam Versionsnummer ist die Version, mit der sich OSCam seinem Gegenüber zu erkennen gibt. Erkennt OSCam, dass das Gegenüber ebenfalls eine OSCam ist, spielt dies jedoch dann keine Rolle mehr. Ansonsten ist die Nummer halt wichtig für die zu verwendende Schnittstellenversion, da sich die Versionen in einigen Details unterscheiden.<br />
<br />
* [dboxyo]:Um das extended CCcam Protokoll nutzen zu können, muss die NodeId entweder von OScam automatisch gesetzt werden, oder aus einer Prüfsumme bestehen, welche es OScam erlaubt, zu erkennen, dass es sich um einen OScam-Server handelt<br />
<br />
* good sid/bad sid Austausch geht nur bei ext oder bei cccam>=2.2.0<br />
<br />
* "O" CCcam kann immer nur '''EIN ECM''' pro Intervall verarbeiten, also man muss auf die Antwort warten, bis man das nächste ECM senden kann. Während dieser Wartezeit können also keine weiteren ECM verarbeitet werden; der reader ist blockiert. "O" cccam ist synchron. Kommt es zu einem Timeout reconnected "O" ccccam.<br />
<br />
* Extended ist die Möglichkeit bis zu 255 ECM gleichzeitig zu verarbeiten. Es ist dabei nicht notwendig, auf die Antwort zu warten. Jedes ECM bekommt dabei eine Nummer und die Antwort auch. Somit können sich auch Antworten gegenseitig "überholen" und trotzdem korrekt zugeordnet werden. Das OSCam-CCcam ist asynchron.<br />
<br />
* Wenn man mit der Maus im Webif über einen "cccam ext" Eintrag geht, sieht man den verwendeten client. Derzeit unterstützt nur OSCam, vPlug, hadu und (??bin mir unsicher??) Acamd das "cccam ext" Protokoll. Eventuell noch weitere clients (OSCam ist ja Open Source...!).<br />
<br />
* Stealth verhindert das Erkennen also OSCam bzw "cccam ext". Es gelten dann die Beschränkungen wie bei "O" cccam. Stealth macht bei korrekter Id = Id+1.<br />
<br />
* Nicht nur Stealth verhindert das Erkennen von cccam ext, sondern auch das Setzen einer individuellen NodeID. CCcam braucht die NodeID, um die Herkunft der Karten und ECM's zu steuern und damit Kreisbeziehungen zu verhindern. In der NodeID steckt die eigentliche Erkennung. Da ist eine versteckte Prüfsumme, die der Gegenseite sagt, dass hier OSCam ist. Wenn die schon nicht stimmt, wird auf den "Kompabilitätsmodus" also das "O" des CCam-Protokolls herabgestuft.<br />
<br />
<br />
===== cccmaxhops =====<br />
{{Depends}}<br />
Legt das Maximum an Distance-Hops für die Karte fest<br />
0 = Nur lokale Karte<br />
1 = Lokale Karte + 1 Hop<br />
2 = Lokale Karte + 2 Hops<br />
und so weiter<br />
Default-Wert = 10<br />
<br />
<br />
===== ccchop =====<br />
{{Depends}}<br />
ccchop = hop<br />
<br />
Setzt den hop für '''nicht'''-cccam-reader<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">ÄNDERUNG svn8607:04/10/2013</span><br />
<br />
Definiert den reshare-hop für CCcam-Reader<br />
<br />
cccreshare = hop<br />
= -1 # kein reshare<br />
= 0 # reshare für direct peer <br />
= 1 # reshare für direct peer und den nächsten Level<br />
= x # reshare für direct peer und die nächsten x (Anzahl) Level<br />
<br />
'''schlocke:'''<br />
<br />
reshare kann auf 3 verschiedene Arten definiert werden:<br />
<br />
- über oscam.server [reader] ("cccreshare")<br />
<br />
- über oscam.conf [cccam] ("reshare")<br />
<br />
- über oscam.user [account] ["cccreshare")<br />
<br />
Ein reshare Wert wird auf den kleinsten Wert aller Parameter gesetzt!<br />
Wenn der Wert < 0 ist, wird die Karte nicht reshared.<br />
<br />
<br />
===== cccwantemu =====<br />
{{Depends}}<br />
Anfrage, auch einen emu vom CCcam-Server zu erhalten.<br />
cccwantemu = 1 # ja<br />
= 0 # nein default<br />
<br />
<br />
===== ccckeepalive =====<br />
{{Depends}}<br />
Sendet eine "keepalive-message", um eine Verbindung zum remote CCCam-Server zu erhalten.<br />
ccckeepalive = 1 # ja<br />
= 0 # nein (default)<br />
<br />
<br />
===== cccreconnect =====<br />
{{Optional}}<br />
cccreconnect = timeout (ms)<br />
<br />
default = 12000 (ms)<br />
<br />
Wiederverbindung nach ECM-Request-Timeout in Millisekunden.<br />
Gilt nur für O-cccam reader, für cccam-ext Protokoll wird diese Zeit ignoriert.<br />
<br />
<br />
===== cccmindown =====<br />
{{Depends}}<br />
cccmindown = # Zahl<br />
= 0 default<br />
<br />
Filtert alle Reader mit hops, die kleiner sind als die eingesetzte Zahl<br />
<br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn8350:02/15/2013</span><br />
<br />
'''Beispiel einer funktionierenden Minimal-Konfiguration:'''<br />
<br />
Angenommen die GBOX läuft auf Host 192.168.1.101 und OSCam liegt auf 192.168.1.123. Im File '''cwshare.cfg''' auf der GBox-Seite stehen z.B. folgende Eintragungen:<br />
M:{192.168.1.101{A123BCDE}}<br />
D:{192.168.1.123{3820 3819{98AF3E25{A3 A3}}}}<br />
Wenn sich oscam_gbox mit der originalen GBOX von oben verbinden soll, dann sieht die Konfiguration auf OSCam so aus:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client<br />
<br />
<br />
===== device =====<br />
{{Mandatory}}<br />
device = Komma-separierte Liste mit den Werten<br />
<br />
peer's IP oder Hostname<br />
peer's port<br />
<br />
Beispiel:<br />
device = 192.168.1.101,3820<br />
<br />
<br />
===== password =====<br />
{{Mandatory}}<br />
password = 4 hex bytes, 8 chars<br />
<br />
Peer Passwort<br />
<br />
Beispiel:<br />
password = A123BCDE<br />
<br />
===== gbox_reshare =====<br />
{{Optional}}<br />
Reshare-Level für lokale Karte(n), default = 2<br />
<br />
===== gbox_max_distance =====<br />
{{Optional}}<br />
gbox_max_distance = maximale Distanz zum Empfang von peer-cards, default = 2<br />
<br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional}}<br />
gbox_max_ecm_send = sende ecm zu maximal n peer cards, default = 3<br />
<br />
<br />
===== user =====<br />
{{Mandatory}}<br />
Benutzername (client) der oscam Gbox<br />
<br />
Beispiel<br />
user = gbox_client<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Achtung:'''<br />
'''Der user muss auch in der oscam.user als [account] eingetragen werden.'''<br />
<br />
'''Man sollte unbedingt für jeden gbox [reader] einen anderen user [account] benutzen.'''<br />
'''Nur dann sind die Peers im Log usw unterscheidbar.'''<br />
<br />
'''Unter [reader] und [account] sollten geeignete Filter gesetzt werden (services=, caid=, ident=), um Instabilitäten der GBOX durch<br />
'''Überfluten mit Karten zu vermeiden.'''<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.server&diff=13488
OSCam/en/Config/oscam.server
2018-12-16T20:27:40Z
<p>Felixka: /* gbox */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
== oscam.server ==<br />
The server configuration file for OSCam contains reader parameters. Sections in oscam.server are recurring (more than one reader possible). At least one [reader] section is required. Examples for reader configuation you will find here [[OSCam/en/examples/Reader|example configurations]]<br />
<br />
{{OSCamServerParameter}}<br />
<br />
=== [reader] ===<br />
Define local or remote reader<br />
<br />
==== label ====<br />
{{required}}<br />
<br />
name for reader<br />
<br />
Example:<br />
label = easymouse2<br />
<br />
==== enable ====<br />
{{Optional/en}}<br />
deactivate reader<br />
0 = off<br />
1 = On (default)<br />
<br />
==== description ====<br />
{{Optional/en}}<br />
<br />
description = text<br />
<br />
description of reader, default: [blank] none<br />
<br />
==== protocol ====<br />
{{required}}<br />
<br />
reader protocol<br />
protocol = mouse (local cardreader)<br />
= internal (all cardreader with "device=/dev/sciX", and internal Coolstream-Reader)<br />
= camd35|cs357x (cascading - camd 3.5-compatible remote server - udp)<br />
= mp35<br />
= smartreader<br />
= serial<br />
= cs378x (camd 3.5-compatible remote server - tcp)<br />
= gbox<br />
= newcamd|newcamd525<br />
= newcamd524<br />
= cccam<br />
= radegast<br />
= pcsc<br />
= constcw<br />
= sc8in1<br />
= smargo<br />
<br />
==== device ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8057+8059:01/04/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8096:01/13/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8911:09/10/2013</span><br />
<br />
define local or remote reader<br />
<br />
device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|<ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw<br />
<br />
set reader type<br />
<br />
readertype:<br />
SR: Smartreader+ (default)<br />
SRv2: Smartreader V2<br />
Infinity: Infinity USB <br />
TripleP1: Smargo Triple Reader port 1 <br />
TripleP2: Smargo Triple Reader port 2 <br />
TripleP3: Smargo Triple Reader port 3<br />
<br />
bus:device: bus name and device name of the smartreader+<br />
(get the name with lsusb 'Bus' ans 'Device')<br />
<br />
serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)<br />
<br />
device: device name<br />
<br />
device:slot: device name and slot number sc8in1 /1-8)<br />
(only one sc8in1 reader supported)<br />
<br />
ip|hostname: IP address or host name<br />
<br />
port: TCP/IP port<br />
<br />
lport: remapping to local TCP/IP port<br />
<br />
PCSC: number of PCSC reader, starting with 0<br />
As an alternative it is possible to select via reader name (part), e.g. "-1:SCR 3310" (names of detected readers are shown by "oscam -d 32")<br />
<br />
0|1: ''' for Coolstream HD-1 STB only''': select reader 0 or reader 1<br />
<br />
constantcw: constant CW file name<br />
<br />
CW-File-Format: <br />
'''Standard'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID::key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F <br />
<br />
'''Extended OSCam-Format'''<br />
CAID:Provider ID:Service ID:PMT ID:ECM PID:Video PID:key (16 Bytes seperated by spaces)<br />
example:<br />
1234:123456:1234:2345:3456:7890:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F<br />
<br />
<br />
Examples for device parameters<br />
device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))<br />
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))<br />
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))<br />
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)<br />
<br />
'''Attention:''' Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.<br />
<br />
==== detect ====<br />
{{Depends/en}}<br />
<br />
card status (inserted or removed) is detected via an UART handshake input line, called cd, cts, dsr or ring.<br />
<br />
detect = cd (default) | cts | dsr | ring | none <br />
<br />
* none means: no detection line connected to the card reader. The card is always detected as being inside cardreader.<br />
<br />
* Inverse detect signal = prefix "!"(eg "detect = !cts")<br />
<br />
<br />
If '''use_gpio = 1''' is set:<br />
<br />
detect = gpio1...gpio7 - Card status detected via a gpio. GPIO means "general purpose input output". <br />
<br />
example easymouse 2:<br />
[reader]<br />
label = mymouse<br />
description = mymouse xxx<br />
protocol = mouse<br />
device = /dev/ttyUSB0<br />
services = xxx<br />
boxkey = 1122334455667788<br />
force_irdeto = 1<br />
'''detect = cd'''<br />
mhz = 1000<br />
cardmhz = 600<br />
group = 1,2,3<br />
emmcache = 1,3,2<br />
<br />
==== use_gpio ====<br />
{{Depends/en}}<br />
use gpio as card detect/reset <br />
use_gpio = 0 off (default)<br />
use gpio = 1 on<br />
<br />
==== cardmhz ====<br />
{{Depends/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
Example:<br />
cardmhz = 600 # Irdeto card<br />
= # [blank] 357 (default)<br />
<br />
'''INTERNAL READERS'''<br />
<br />
If you use cardmhz >2000 OScam will switch to PLL clocking. Internal readers of boxes from Dream Multimedia GmbH can be clocked more precise with it.<br />
<br />
The used cardmhz should reflect the highest frequency of the PLL crystal in the internal cardreader. OSCam will calculate the best PLL divider that comes nearest to the wanted user card speed specified in cardmhz.<br />
<br />
Use the following settings:<br />
<br />
Models with PPC-CPU (DM500/DM600/DM7000/DM7020) use "cardmhz = 3150"<br />
<br />
Models with MIPS-CPU (DM500HD/DM800/DM800SE/DM8k/DM7020HD etc.) use "cardmhz = 2700"<br />
<br />
DM7025 is special, use "cardmhz = 8300"<br />
<br />
'''If only the parameter cardmhz is set (without mhz = xxx) then Oscam clocks the card automatically with the ATR! '''<br />
<br />
E.G. You have a dream 800 HD PVR, thats a mips so you should set cardmhz to 2700. We got a nagra card that should run on 5 MHz. If<br />
<br />
you want to clock the card ok just use cardmhz = 2700 an mhz = 500. If you want to overclock it use cardmhz = 2700 and mhz = 900.<br />
<br />
Now your card will start to run 9 Mhz. Better monitor it! An overclocked card could run hot or crash suddenly!<br />
<br />
Keep in mind that most internal readers of non-dreamboxes clock the cards automatically and copletely ignore any user clockspeed setting. But you should set cardmhz and mhz anyway, as its still used to calculate the correct timings in OSCam. If you set cardmhz/mhz correct the timings will better match with the actual (automatically) clockspeed of the internal card reader. As for a result slighly better ecm responses or more stable functioning.<br />
<br />
Dont expect magic here, only overclocking the cardspeed can reduce the ecm response time. Bad timings can only delay it or make the card responses instable!<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== mhz ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 9064:12/13/2013</span><br />
<br />
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in overclocking mode, refer to [[OSCam/en/examples/Overclocking|Overclocking]]<br />
<br />
Example:<br />
# Default 357<br />
cardmhz = 600 # ( 6000 KHz = 6 MHz)<br />
mhz = 1000 # (10000 KHz = 10 MHz)<br />
<br />
auto clock speed in '''Dreambox mode''' set to -1. Further Informations about the various (Dream)Boxes can be found [http://www.streamboard.tv/oscam/wiki/ReaderClocks here].<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/CardsList|List of default and overclocking card frequencies]]'''<br />
<br />
==== autospeed ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9064:12/01/2013</span><br />
<br />
autospeed = 0|1<br />
<br />
autospeed = 0 disabled <br />
autospeed = 1 (default) Sets mhz according to ATR. Currently only used for smartreader, smargo protocol and Dreambox-readers internal protocol. Other readers will be adapted to use this<br />
parameter as well. In webif checked means 1. If you want to overclock your card set autospeed to 0.<br />
<br />
==== deprecated ====<br />
{{Optional/en}}<br />
First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud.<br />
<br />
deprecated = 1 use deprecated SC mode only<br />
= 0 default<br />
<br />
==== mode ====<br />
{{Depends/en}}<br />
set card init mode for '''AzBox''' reader<br />
mode = 1 # AzBox-Reader<br />
= 0 # none (default)<br />
<br />
==== device_out_endpoint ====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8013:12/29/2012</span><br />
<br />
set endpoint address for FTDI chips<br />
device_out_endpoint = 0x81 # Smargo Triple Reader port 1<br />
= 0x82 # Smartreader+ (default)<br />
= 0x83 # Smargo Triple Reader port 2<br />
= 0x85 # Smargo Triple Reader port 3<br />
<br />
==== smargopatch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
smargopatch = 0|1<br />
<br />
enable workaround for smartreader+ and reader until native mode works, default = 0<br />
<br />
<br />
==== sc8in1_dtrrts_patch ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6402:02/16/2012</span><br />
<br />
sc8in1_dtrrts_patch = 0|1<br />
<br />
enable fix for SC8in1/MCR DTR/RTS kernel bug, default = 0<br />
<br />
==== cool_timeout_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6286:01/23/2012</span><br />
<br />
cool_timeout_init = timeout in milli seconds, default = 0<br />
<br />
set card init mode for '''AZBox''' internal reader<br />
<br />
==== cool_timeout_after_init ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6253:01/17/2012</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: only for Coolstream!'''<br />
<br />
cool_timeout_after_init = timeout in milli seconds, default = 0<br />
<br />
set read/transmit timeout after SC init in milli-seconds for Coolstream internal reader only, default:150<br />
<br />
==== ins2e06 ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9568:03/16/2014</span><br />
add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs<br />
ins2e06 = Payload <br />
= # none [blank] (default)<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
http://www.streamboard.tv/oscam/changeset/9568 <br />
<br />
==== ins7e ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5959:09/22/2011</span><br />
<br />
ins7e = payload<br />
= [none] default<br />
Add 26 hex-bytes payload for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== ins7e11 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6064:12/06/2011</span><br />
<br />
ins7e11 = TA1 Byte<br />
= # [none] default<br />
= 11 # 0001 FI + 0001 DI (1 x)<br />
= 13 # 0001 FI + 0011 DI (4 x)<br />
= 14 # 0001 FI + 0100 DI (8 x)<br />
= 15 # 0001 FI + 0101 DI (16 x)<br />
<br />
Add TA1 Byte for '''NDS Videoguard 2 SCs'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br/><br />
==== fix07 ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9884:09/30/2014</span><br />
{{Optional/en}}<br />
enable 0x07 fix for NDS Viedeoguard 2 SCs<br />
fix07 = 1 # enabled (default)<br />
= 0 # disabled<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' valid for physical readers only<br />
<br />
==== force_irdeto ====<br />
{{Optional/en}}<br />
<br />
force Irdeto SC mode even if RSA key is set for Irdeto tunneled Nagravion SC<br />
force_irdeto = 1 # yes<br />
= 0 # no (default)<br />
<br />
==== nagra_read ====<br />
{{Optional/en}}<br />
<br />
read '''Nagravison''' records (on NCMED cards only):<br />
nagra_read = 0 # disabled (default)<br />
= 1 # read all records with expired rights<br />
= 2 # read records with valid rights only<br />
<br />
==== rsakey ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7046:06/12/12</span><br />
<br />
RSA key for Nagravision/Tiger SCs / CAM key data for Irdeto SCs, Conax SCs, default = none<br />
<br />
==== fix9993 ====<br />
{{Optional/en}}<br />
<br />
fix9993 = 0|1<br />
<br />
enabled fix for 9993 error with CAID 0919 SCs.<br />
<br />
fix9993 = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== readtiers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10376:02/02/15</span><br />
<br />
readtiers = 0|1|2<br />
<br />
method to get tiers of NDS Videoguard SCs<br />
<br />
readtiers = 0 # disabled (default)<br />
readtiers = 1 # ins70 (new) method <br />
readtiers = 2 # ins76 (old) method<br />
<br />
==== boxkey ====<br />
{{Optional/en}}<br />
box key for Nagravision SCs / CAM key for Irdeto SCs / sessionkey for Seca SCs / CamID for Viaccess<br />
<br />
==== pincode ====<br />
{{Optional/en}}<br />
<br />
pincode for '''Conax, Cryptoworks an Viaccess''' SCs<br />
pincode = pincode<br />
= # [blank] default<br />
<br />
==== boxid ====<br />
{{Optional/en}}<br />
<br />
NDS receiver box id<br />
boxid = NDS box ID<br />
<br />
==== ndsversion ====<br />
{{Optional/en}}<br />
<br />
set NDS '''Videoguard''' version<br />
0 = # autodetection (default)<br />
1 = # NDS Videoguard 1<br />
12 = # NDS Videoguard 1+<br />
2 = # NDS Videoguard 2<br />
<br />
==== aeskeys ====<br />
{{Optional/en}}<br />
<br />
multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM)<br />
<br />
CAID #ident:AES key #0 CAID #0[,AES key #1 CAID #0],...[;CAID #1@ident::AES key #0 CAID #1[,AES key #1 CAID #1],...]...<br />
<br />
special AES keys:<br />
00 = do not return any CW, no AES key specified<br />
FF = return CW received from the S, no AES key specified<br />
<br />
Example:<br />
aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:0,0,0f0e0d0c0b0a090807060504030201<br />
aeskeys = 0500@012345;key0,key1,key2,key3,key4,key5,...;0500@543210:key0,key1,key2,key3,key4,key5,...<br />
if keys are unknown replace them with 0 exemple: 0500@012345;key0,key1,0,0,key4,key5,...<br />
<br />
==== showcls ====<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6624:04/23/2012</span><br />
{{Optional/en}}<br />
<br />
number of classes subscriptions to show for '''Viacces-SCs'''<br />
schowcls = quantity<br />
= 0 # (default)<br />
<br />
==== key ====<br />
{{Depends/en}}<br />
key for newcamd remote reader encryption<br />
key = DES key<br />
<br />
==== user ====<br />
{{Optional/en}}<br />
user for remote reader (name)<br />
<br />
==== password ====<br />
{{Optional/en}}<br />
password for remote reader<br />
<br />
==== services ====<br />
{{Optional}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If loadbalancing is enabled in oscam.conf [global] among lb_mode, then there may be '''no entries'''!<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The number of services that will be considered based reader, is limited to 64, or 64 times [[service-name][CAID][provid][srvid]]! <br />
<br />
What services can the reader. This requires a oscam.services be present. The logic here is as follows (in this order):<br />
* If the field is empty (or invalid), the request is allowed.<br />
* When a negative service (ie, those with "!") is applicable, the request is rejected.<br />
* If a positive service is applicable or there is no positive service, the request is allowed.<br />
* If none of the previous points, the request is rejected.<br />
This means that negative Services are only necessary in individual cases. Namely, if and when services has positive, but it wants to exclude some back. This is not recommended, because here comes quickly to misconfigurations. Instead, an additional service to be created that contains all the relevant channels.<br />
<br />
[de]assignment to service group<br />
services = [!]services[,[!]<services>]...<br />
= [blank] is default<br />
<br />
==== caid ====<br />
{{Optional/en}}<br />
<br />
caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:target <CAID>]]...<br />
<br />
define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF<br />
<br />
example: <br />
caid = 0100<br />
caid = 0200&ffee:0300<br />
caid = 0400&ff00:0500,0600<br />
caid = 0702,0722<br />
caid = 0702&ffdf (shortcut for the example above)<br />
<br />
==== ident ====<br />
{{Optional/en}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If in oscam.conf [global] loadbalancing is enabled among lb_mode, then there may be '''no entries'''!<br /><br />
This parameter is only used for EMM and then it is not used for ECM. So you cannot force ECM to be sent to the card using this parameter.<br /><br />
<br />
define CAID and ident '''SC specific''' for reader:<br />
ident 0 <CAID>:<ident>[,ident]...[;<CAID>:<ident>[,ident]...]...<br />
<br />
Example<br />
ident = # 0100:123456,234567;0200:345678,456789<br />
= # [blank] no definition (default)<br />
<br />
==== class ====<br />
{{Optional/en}}<br />
<br />
define class '''in hex''' SC specific for reader:<br />
class = 01,02,!1b,!2b # 01 and 01 yes, 1b and 2b no<br />
= # [blank] no definition (default)<br />
<br />
==== localcards ====<br />
{{Optional/en}}<br />
<br />
Use this reader (for defined CAIDs only) as "local" in LB/reader selection. <br />
It will be handle as a local reader per LB and preferlocalcards settings. In this way, we can consider a network reader as local, like we had a cardreader.<br />
<br />
localcards = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]....<br />
<br />
==== chid ====<br />
{{Optional/en}}<br />
<br />
define '''Irdeto ChID''' for reader<br />
<br />
Example:<br />
chid = 0100:12<br />
chid = 0100:12;0604:0000BA,000101,00010E,000141<br />
= # [blank] default<br />
<br />
==== group ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6103:12/21/2011</span><br />
<br />
Reader assingment to group. Each reader must be listed in one or more groups. This will determine, which client has access on what reader. Valid values 1-64<br />
group = 1....64[,1....64]....<br />
<br />
<br />
'''set required = [blank] default not allowed!'''<br />
<br />
Example:<br />
Group = 1 # (one group)<br />
Group = 1,4,5 # (more groups)<br />
<br />
==== audisabled ====<br />
{{Optional/en}}<br />
<br />
exclude reader from auto AU (auto update)<br />
audisabled = 1 # excludet<br />
= 0 # not excludet (default)<br />
<br />
==== auprovid ====<br />
{{Optional/en}}<br />
set provider ID to use the right reader for auto AU<br />
<br />
Example<br />
auprovid = # 123456<br />
= # [blank] default<br />
<br />
==== disableserverfilter ====<br />
{{Optional/en}}<br />
ignore caid and ident settings of reader due faulty clients<br />
disableserverfilter = 1 # ignore<br />
= 0 # not ignore (default)<br />
<br />
==== inactivitytimeout ====<br />
{{Depends/en}}<br />
inactivity timeout in seconds<br />
<br />
inactivitytimeout = seconds<br />
= -1 # reconnect on network failure for '''newcamd''' based readers, even in idle<br />
= 0 # default<br />
<br />
==== reconnecttimeout ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7244:08/07/2012</span><br />
<br />
Reconnect from a remote reader, if missing answers in seconds<br />
<br />
Example<br />
reconnecttimeout = 20 # after 20 seconds new connection<br />
= # [blank] default<br />
<br />
==== connectoninit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8235:01/29/2013</span><br />
<br />
connectoninit = 0|1 <br />
<br />
1 = allow newcamd connections to be established on starup although there isn't a request yet<br />
0 = default<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9810:07/22/2014</span><br />
<br />
keepalive = 0|1<br />
<br />
1 = allow cs378x TCP socket to be always connected<br />
0 = always on if cacheex reader type<br />
<br />
<br />
<br />
==== fallback ====<br />
{{Optional/en}}<br />
<br />
Define reader as fallback, standard and fallback reader must have the same group, see '''group'''!<br />
fallback = 1 # fallbackreader<br />
= 0 # no fallbackreader (default)<br />
<br />
==== fallback_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8896:09/04/2013</span><br />
<br />
fallback_percaid = <CAID>[:<ident>[,ident]]...[;<CAID>[:<ident>[,ident]]...]...<br />
<br />
use reader as fallback for defined CAIDs only, two digit wildcards CAIDs are possible, fallback_percaid overrules fallback. Def.=none<br />
<br />
example:<br />
fallback_percaid = 1234:234567;10:345678<br />
<br />
<br />
==== emmcache ====<br />
{{Optional/en}}<br />
<br />
set EMM cache of local reader<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
<br />
Without this parameter, no EMM are shown in the log!<br />
<br />
<br />
Format:<br />
'''''emmcache = <usecache>,<rewrite>,<logging>,<stb-emm>'''''<br />
<br />
* <usecache> 0 = # disable usage of emmcache and emmstats (default)<br />
* <usecache> 1 = # enable emmcache, emmstats and save to file if oscam is stopped<br />
* <usecache> 2 = # enable emmcache, emmstats but dont save to file if oscam is stopped<br />
<br />
* <rewrite> n = # determines how often one and the same EMM is written. '''only if <usecache> = 1 or 2'''<br />
<br />
* <logging> 0 = # EMM logging disabled<br />
* <logging> 1 = # logging EMM errors<br />
* <logging> 2 = # logging written EMMs<br />
* <logging> 4 = # logging skipped EMMs<br />
* <logging> 8 = # logging blocked EMMs<br />
* <logging> 16 = # logging audisabled EMMs<br />
<br />
* <stb-emm> 0 = # EMM for STB are ignored (default)<br />
* <stb-emm> 1 = # EMM for STB are sent to the reader (very specific usage)<br />
<br />
Sumarizing this values is possible. 31 shows all kinds of messages.<br />
<br />
Example:<br />
emmcache = 1,3,10,0 # Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emm<br />
emmcache = 1,2,6,1 # Cache on, write 2 x, log written (2) and skipped (4) = 6, send stb-emm<br />
<br />
'''stb-emm''': is only handy for specific usage (Viaccess: see commit [http://www.streamboard.tv/oscam/changeset/10584 #10584] ) In Viaccess we saw some EMM-G that are for the STB and not for the card. That's why we call it EMM-STB (Set Top Box). Those EMMs are, for exemple, used to define overencryption key (AES) into the STB to encrypt STB-Card dialog.<br />
<br/><br />
<br />
==== emmreassembly ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8493:03/06/2013</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8591:04/01/2013 parameter now in oscam.user!</span><br />
<br />
emmreassembly = 0|1<br />
<br />
1 = enable EMM reassembly, default<br />
0 = disable EMM reassembly<br />
<br />
should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling than instead of just sending them to OSCam for processing<br />
<br />
<br/><br />
<br />
==== cacheex ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6044:11/27/2011</span><br />
<br />
cacheex = 0|1|2|3<br />
<br />
1 = enable cache exchange pull mode<br />
2 = enable cache exchange push mode <br />
3 = enable cache exchange reversepush mode<br />
0 = default<br />
for camd 3.5x and CCcam protocol<br />
<br />
see also on oscam.user!<br />
<br />
Identical cache exchange modes must be set on local OSCam server and remote OSCam user account!<br />
<br />
<br />
===== cacheex-modes =====<br />
===== cacheex = 1 - cachepull =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 1<br />
<br />
OSCam B account1 has cacheex = 1<br />
<br />
OSCam A gets a ECM request, reader1 send this request to OSCam B,<br />
<br />
OSCam B checks his cache:<br />
* Not found in cache: return NOK<br />
* Found in cache: return OK+CW<br />
* Not found in cache, but found pending request: wait ''cacheexwaittime'' in oscam.conf [global] and check again. OSCam B never requests new EMMs.<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 2 - cachepush =====<br />
Situation:<br />
<br />
OSCam A reader1 has cacheex = 2<br />
<br />
OSCam B account1 hastcacheex = 2<br />
<br />
If OSCam B gets a CW, its pushed to OSCam A, reader has normal functionality and can request ECMs.<br />
* Problem: OSCAM can only push CW's if OSCam A is connected<br />
* Problem or feature?: OSCam A reader can request ECMs from OSCam B<br />
<br />
CW-flow = B ---> A<br />
<br />
===== cacheex = 3 - reversecachepush =====<br />
Situation:<br />
<br />
OSCam A reader 1 has cacheex = 3<br />
<br />
If OSCam A gets a CW, its pushed to OSCam B. OSCam A never requests new ECMs.<br />
<br />
CW-flow = A ---> B<br />
<br />
==== cacheex_maxhop ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6691:05/07/2012</span><br />
<br />
cacheex_maxhop = hops<br />
= default = 10 hops<br />
<br />
define maximum hops for cach exchange<br />
<br />
<br />
==== logport ====<br />
{{Optional/en}}<br />
<br />
Camd 3.x reader logport, camd 3.x UDP must be activated, only works if there's no camd 3.x cascading<br />
logport = # port number<br />
= 0 # disabled (default)<br />
<br />
==== ecmwhitelist ====<br />
{{Optional/en}}<br />
<br />
ecmwhitelist = [CAID[@provid]:]length[,length]...[;[CAID[@provid]:]length[,length]...]...<br />
<br />
define valid ECM length in '''hex''' and provid for physical reader<br />
<br />
example<br />
ecmwhitelist = 10,20,30,0a,0b,0c<br />
= 0100:10,20;0200@12345:0a,4b <br />
[blank] = none (default) and provid 000000<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''In normal operation mode this parameter ist not required!'''<br />
<br />
[[Datei:MessageS.png|text-bottom]] '''[[Streamboard:oscam/wiki/ECMLengthList|List of ECM lengths]]'''<br />
<br />
==== ecmheaderwhitelist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7480:09212012</span><br />
<br />
ecmheaderwhitelist = [CAID[@provid]:]header[,header...[;[@provid]:]header[,header]...]...<br />
<br />
set valid ECM header per CAID and provid '''in hex'''<br />
<br />
default: none, provid = 000000<br />
<br />
thread [[Streamboard-Thread:34748|here]]<br />
<br />
[[Streamboard:oscam/wiki/HeaderWhitelist|HeaderWhitelist]] here<br />
<br />
==== ratelimitecm ====<br />
{{Optional/en}}<br />
<br />
number of different SIDs in ECMs allowed for an interval<br />
ratelimitecm = # number<br />
= 0 # (default)<br />
<br />
==== ecmnotfoundlimit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8313:02/07/2013</span><br />
<br />
ecmnotfoundlimit = count<br />
<br />
number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit (default)<br />
<br />
==== resetcycle ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5820:08/12/2011</span><br />
<br />
resetcycle = count<br />
<br />
number of ECMs until SC reset ist performerd<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Hint:''' Valid for physical readers only!<br />
<br />
example:<br />
resetcycle = 0 # disabled [default]<br />
= 5 # reset after 5 ECM's<br />
<br />
==== ratelimittime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
interval for rate limit in milliseconds<br />
ratelimittime = # milliseconds<br />
= 0 # (default)<br />
<br/><br />
<br />
==== ecmunique ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8491:03/06/2013</span><br />
<br />
ecmunique = 0|1<br />
<br />
1 = enable check for matching ECM hash in ratelimit slot<br />
0 = default<br />
<br />
Remark: parameter ratelimitecm must be set to be able to enable this option!<br />
<br />
<br/><br />
<br />
==== srvidholdtime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9078:09/12/2013</span><br />
<br />
srvidholdtime = milliseconds<br />
<br />
time to keep service ID in ratelimit slot, during this time checking for ecmunique ist disabled.<br />
0 = default<br />
<br/><br />
<br />
==== cooldown ====<br />
{{Optional/en}}<br />
<br />
cooldown = delay, duration <br />
<br />
define cooldown:<br />
delay = delay in milliseconds for which the reader is allowed to do more<br />
ECM requests then defined by parameter "ratelimitecm"<br />
default: [blank] none<br />
duration = duration in milliseconds the reader needs to cooldown<br />
default: [blank] none<br />
<br />
Both parameters are mandatory when used.<br />
<br />
'''parameter "ratelimitecm" and "ratelimittime" are required!'''<br />
<br />
==== blocknano ====<br />
{{Optional/en}}<br />
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only valid for physical readers!<br />
<br />
Example:<br />
blocknano = 45,93,7a,ff<br />
= all<br />
= # [blank] (default)<br />
<br />
==== blockemm-u ====<br />
{{Optional/en}}<br />
<br />
block unique EMMs<br />
blockemm-u = 0 # (no block) default<br />
blockemm-u = 1 # (block EMMs, which are addressed to card immediatly) )<br />
<br />
==== blockemm-s ====<br />
{{Optional/en}}<br />
<br />
block shared EMMs<br />
blockemm-s = 0 # (no block) default<br />
blockemm-s = 1 # (block EMMs, which are addressed to certain groups of cards)<br />
<br />
==== blockemm-g ====<br />
{{Optional/en}}<br />
<br />
block global EMMs<br />
blockemm-g = 0 # (no block) default<br />
blockemm-g = 1 # (block EMMs, which are addressed to all cards)<br />
<br />
==== blockemm-unknown ====<br />
{{Optional/en}}<br />
<br />
block unknown types of EMMs<br />
blockemm-unknown = 0 # (no block) default<br />
blockemm-unknown = 1 # (block all unknown kinds of EMMs)<br />
<br />
==== blockemm-bylen ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8615:04/12/2013</span><br />
<br />
blockemm-bylen = [length range,length range]... (decimal)<br />
<br />
block all types of EMMs by length, maximum 10 values, default: none<br />
<br />
example:<br />
blockemm-bylen = 1-10,11-<br />
<br />
<br/><br />
<br />
==== via_emm_global ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9843:09/05/2014</span><br />
<br />
via_emm_global == 0|1<br />
<br />
enables global emm filter for '''viacces'''<br />
<br />
'''only for camd35 (cs357x) protocol!'''<br />
<br />
0 = default<br />
<br />
<br/><br />
<br />
====saveemm-u ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-u = 0 (default)<br />
= 1<br />
<br />
save unique EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-s ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-s = 0 (default)<br />
= 1<br />
<br />
save shared EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-g ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-g = 0 (default)<br />
= 1<br />
<br />
save global EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
====saveemm-unknown ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn5947:09/09/2011</span><br />
<br />
saveemm-unknown = 0 (default)<br />
= 1<br />
<br />
save unkown EMMs to file. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
==== savenano ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn5947:09/09/2011</span><br />
<br />
list of EMM-nanos (in hex w/o 0x) to save or all EMM-nanos. Only valid for physical readers. The path can be defined with "emmlogdir=" in oscam.conf (default=config-dir). <br />
<br />
Format<br />
nano[,nano]....|all<br />
<br />
Beispiel<br />
savenano = 45,93,7a,ff<br />
= all<br />
= # [blank] default<br />
<br />
==== readnano ====<br />
{{Optional/en}}<br />
Write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers!<br />
<br />
Example:<br />
readnano = write.emm<br />
= /var/oscam/write.emm<br />
= # [blank] (default)<br />
<br />
==== use-ssl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8725:06/25/20113</span><br />
<br />
use_ssl = 0|1<br />
<br />
use_ssl = 1 # use SSL for ghttp protocol<br />
= 0 # default<br />
<br />
<br />
<br />
==== dropbadcws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn5992:10/22/2011</span><br />
<br />
dropbadcws = 0|1<br />
<br />
dropbadcws = 1 # reject bad CWs, send "not found" instead of bad CWs<br />
= 0 # default<br />
<br />
==== disablecrccws ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6004:10/26/2011</span><br />
<br />
disablecrccrws = 1 # disable cw checksum test<br />
= 0 # enable (default)<br />
<br />
<br />
====disablecrccws_only_for====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11292:12/21/2016</span><br />
<br />
disablecrccws_only_for = CAID:PROVID <br />
<br />
Example :<br />
<br />
disablecrccws_only_for = 0500:032830 <br />
<br />
==== lb_weight ====<br />
{{Optional/en}}<br />
<br />
The higher the value the higher the probability for reader selection. It's an divider for the average responstime.<br />
lb_weight = weight<br />
= # [blank] Default-Wert 100<br />
<br />
See here<br />
[[Datei:Lb_weight_calc2.png]]<br />
<br />
==== lb_whitelist_services ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8656:05/22/2013</span><br />
{{Optional/en}}<br />
<br />
lb_whitelist_services = <services>,<services>....<br />
<br />
reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none<br /><br />
<br /><br />
<br /><br />
==== lb_force_fallback ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW - svn9739:05/19/2014</span><br />
<br />
lb_force_fallback = 0|1<br />
<br />
1 = set the reader always as fallback for load blancing without considering the readers statistics<br /><br />
<br />
0 = default<br />
<br /><br />
<br /><br />
<br />
<br />
==== ccc ====<br />
<br />
===== cccversion =====<br />
{{Depends/en}}<br />
<br />
'''Only for CCcam'''<br />
<br />
define CCcam version<br />
<nowiki><mainversion>,<version>,<sub version></nowiki><br />
<br />
Example<br />
cccversion = 1.2.34<br />
<br />
===== cccmaxhops =====<br />
{{Depends/en}}<br />
<br />
define CCcam maximum SC distance hops<br />
0 = local SCs only<br />
1 = local SCs and + 1 hop<br />
2 = local SCs and + 2 hops<br />
and so on<br />
default = 10<br />
<br />
===== ccchop =====<br />
{{Depends/en}}<br />
<br />
ccchop = hop<br />
<br />
Set hop for '''non''' CCCam readers<br />
<br />
default = 0<br />
<br />
<br />
===== cccreshare =====<br />
{{Depends/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
Define reader's CCcam reshare hop<br />
<br />
cccreshare = -1 # no resharing<br />
= 0 # reshare for direct peer only<br />
= 1 # reshare for direct peer and next level<br />
= x # resharing for direct peer and share level x<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
===== cccwantemu =====<br />
{{Depends/en}}<br />
<br />
Request to provide emu from CCCam server, too.<br />
cccwantemu = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== ccckeepalive =====<br />
{{Depends/en}}<br />
<br />
Send keepalive messages to keep connection to remote CCCam server up<br />
ccckeepalive = 1 # yes<br />
= 0 # no (default)<br />
<br />
===== cccreconnect =====<br />
{{Optional/en}}<br />
<br />
cccreconnect = timeout (milli-seconds)<br />
<br />
reconnect again after ECM request timeout in milli-secons, default = 12000 milliseconds<br />
<br />
===== cccmindown =====<br />
{{Depends/en}}<br />
<br />
Filters all readers with hops smaller than number<br />
cccmindown = # number<br />
= 0 # default<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== '''gbox''' ====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 { 3 3 }}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br/><br />
<br/><br />
===== device =====<br />
{{required}}<br />
<br />
device = Comma-separated list of values:<br />
<br />
peer's IP or hostname<br />
peer's port<br />
<br />
example:<br />
device = 192.168.1.101,3820<br />
<br />
<br/><br />
<br />
===== password =====<br />
{{required}}<br />
<br />
password = 4 hex bytes, 8 chars<br />
<br />
peer password<br />
<br />
example:<br />
password = A123BCDE<br />
<br />
<br/><br />
<br />
===== user =====<br />
{{required}}<br />
<br />
user name of oscam gbox<br />
<br />
example<br />
user = gbox_client<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''gbox user must also be inserted in oscam.user [account]'''<br />
<br />
'''It is strongly recommended to use for each gbox reader a different (unique) user account,<br />
'''in order to clearly identify the peer responses<br />
<br />
<br />
'''Set suitable filters (services=, caid=, ident=) in [reader] and [account] section<br />
'''to prevent gbox instability by overflooding with too many cards<br />
<br />
<br/><br />
<br />
===== gbox_reshare =====<br />
{{Optional/en}}<br />
<br />
Reshare-Level of local card(s), default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_distance =====<br />
{{Optional/en}}<br />
<br />
gbox_max_distance = max distance to receive peer cards, default = 2<br />
<br />
<br/><br />
<br />
===== gbox_max_ecm_send =====<br />
{{Optional/en}}<br />
<br />
gbox_max_ecm_send = send ecm to max <gbox_max_ecm_sen> peer cards, default = 3<br />
<br />
<br/><br />
<br />
===== cccam_reshare =====<br />
{{Optional/en}}<br />
<br />
reshare level of ccc proxy cards to send into gbox network<br />
<br />
cccam_reshare = level default = 2<br />
<br />
<br/><br />
<br />
==== '''DRE''' ====<br />
===== exec_cmd_file =====<br />
{{Optional/en}}<br />
<br />
exec_cmd_file = path_to_a_script<br />
<br />
===== stmkeys =====<br />
{{Optional/en}}<br />
<br />
stmkeys = path_to_a_key_file<br />
<br />
===== force_ua =====<br />
{{Optional/en}}<br />
<br />
force_ua = 4 Bytes or 8 chars (expressed in hexa)<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka
http://oldwiki.streamboard.tv/index.php?title=OSCam/en/Config/oscam.conf&diff=13487
OSCam/en/Config/oscam.conf
2018-12-15T12:30:50Z
<p>Felixka: /* tmp_dir */</p>
<hr />
<div>[[Kategorie:OSCam]]<br />
{{OSCamHomeLinks}}<br />
<br />
==oscam.conf==<br />
<br />
=== The [global] section ===<br />
<br />
The main configuration file for OSCam contains global parameters such as debugging, logging, monitor, protocols and anti-cascading. Sections in oscam.conf are nonrecurring. The [global] section is required. All other sections are optional.<br />
<br />
{{OSCamConfGlobalParameter}}<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If a parameter is empty or is not listed in config-file, then apply the default values !<br />
<br />
==== nice ====<br />
{{Optional/en}}<br />
<br />
'''Systempriority'''<br />
<br />
OSCam requires almost no CPU-power. But if CPU-power is required, it should be available immediatly. Values between 20 and -20 are possible. 20 = low, -20 = very high. If this parameter is commented out (#), this function is not called. Important for example for dbox2[http://de.wikipedia.org/wiki/DBOX2], if the error messages "''relocation error:setpriority''". See [http://de.wikipedia.org/wiki/Prioritätsscheduling Prioritätsscheduling]<br />
<br />
Example:<br />
nice = -1<br />
<br />
Default:<br />
nice = 99<br />
<br />
==== Log ====<br />
Format:<br />
CAID&ProviderID/ECMPID/ServiceID/length:checksum<br />
<br />
Debug-Level:<br />
0 = no debugging (default) <br />
1 = detailed error messages <br />
2 = ATR parsing info, ECM dumps, CW dumps <br />
4 = traffic from/to the reader <br />
8 = traffic from/to the clients <br />
16 = traffic to the reader-device on IFD layer<br />
32 = traffic to the reader-device on I/O layer <br />
64 = EMM logging <br />
128 = DVB API logging <br />
256 = load balacing logging <br />
512 = cache exchange logging <br />
1024 = client ECM logging <br />
65535 = debug all <br />
<br />
===== initial_debuglevel =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10705:06/11/15</span><br />
<br />
Set the debuglevel on startup.<br />
<br />
Example:<br />
initial_debuglevel = 8<br />
<br />
Default:<br />
initial_debuglevel = 0<br />
<br />
===== pidfile =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8176/01/24/2013</span><br />
<br />
pidfile = set pidfile, [blank] none (default)<br />
<br />
Change PID file name an path. If default = oscam.pid in /tmp<br />
<br />
Example:<br />
pidfile = /var/run/oscam.pid<br />
<br />
===== logfile =====<br />
{{optional/en}}<br />
<br />
Logging target<br />
logfile = [filename][;syslog][;stdout]<br />
<br />
You can define a maximum of one filename (not more!) and additionally to log to stdout or syslog (you can also only log to stdout or syslog and omit the filename).<br />
<br />
Opportunities:<br />
<br />
logfile = /var/log/oscam.log # file or linux device (for example /dev/tty)<br />
logfile = syslog # log to syslogd <br />
logfile = stdout # showing the log on the console<br />
<br />
Example:<br />
logfile = /etc/oscam/logs/oscam.log;stdout<br />
<br />
Default:<br />
logfile = /var/log/oscam.log<br />
<br />
Format logfile:<br />
CAID&ident/provider/length:checksum<br />
<br />
===== ecmfmt =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6649+6653:05/01/2012</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8831:08/11/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11008-11011:09/28/15</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn11273:08/15/16</span><br />
<br />
ecmfmt = format<br />
<br />
define ECM log format, default:c&p/i/s/l:h <br />
<br />
possible variables: <br />
c = CAID<br />
d = PID<br />
e = CSP hash <br />
g = ID of origin gbox peer <br />
h = checksum<br />
i = Channel ID<br />
j = distance of gbox and CCcam hops <br />
l = length <br />
o = ONID<br />
p = provider ID<br />
s = service ID<br />
t = tier ID , this ID will be replaced with the tier-description from oscam.tiers (if found)<br />
w = CW<br />
y = payload (short, 3 bytes)<br />
Y = payload (long, 6 bytes)<br />
<br />
<br />
use a value as prefix to hide variable with this value, control characters will be escaped by "\" <br />
<br />
example:<br />
ecmfmt = c&0p/i/d/s/l:h.e_w HOP:j<br />
(hide provider ID if 0)<br />
<br />
===== nds_swap_cw =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10003/11/15/2014</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn10048:11/30/2014</span><br />
<br />
nds_swap_cw = 0|<br />
<br />
0 = NDS Videoguard CWs will be dropped, if CWs do not have an odd an even sample (default)<br />
1 = disabled<br />
<br />
===== loghistorysize =====<br />
{{optional/en}}<br />
<br />
loghistorysize = bytes<br />
<br />
size of log message history in web interface or monitor<br />
<br />
0 = disabled<br />
[blank] = 4096 (default)<br />
<br />
===== CACHE EXCHANGE LOGGING =====<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6929:05/24/2012</span><br />
<br />
CACHE EXCHANGE LOGGING <br />
reader stages<br />
1 = cacheex (=1) reader (C) <br />
2 = local SCs (L) #stage 2 is used only if '''preferlocalcards = 1''' was activated in [global] section. <br />
3 = other reader / proxies (P) <br />
4 = fallback reader (F) <br />
<br />
logging format <br />
stage/used/chosen/possible<br />
<br />
example<br />
<br />
P/2/2/2 or L/2/4/4<br />
<br />
===== maxlogsize =====<br />
{{required}}<br />
<br />
Here the maximum size of logfiles are set in KBytes. This is especially important for server with only a small amount of memory (dbox2). Therefore it is strongly recomended to determine carefully that size at such servers. Not infrequently a system "bursting" because the logfile uncontrolled large scale adopted!<br />
<br />
Example<br />
maxlogsize = 20 # Logfile reaches to 20 KBytes<br />
= 0 # Logfile '''unlimited'''<br />
<br />
Default:<br />
maxlogsize = 10 # Logfile reaches to 10 KBytes (default)<br />
<br />
===== logduplicatelines =====<br />
{{optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8290/02/05/2013</span><br />
<br />
logduplicatelines = 0|1<br />
<br />
1 = disable detection of duplicate lines in log file<br />
0 = enable detection of duplicate lines in logfile = default<br />
<br />
===== disablelog =====<br />
{{optional/en}}<br />
<br />
switches logfile '''off'''<br />
1 = '''no log''' <br />
0 = '''log''' <br />
<br />
Example:<br />
disablelog = 1 # '''no''' log <br />
<br />
Default:<br />
disablelog = 0 # '''log'''<br />
<br />
===== cwlogdir =====<br />
{{Optional/en}}<br />
<br />
<br />
A path for cw logging can be configured here. The path is relative to the work directory and must exist. Otherwise no logs are created and no errors are reported. <br />
<br />
CWs (control words) are the answers of the card which decrypts a certain channel for some seconds before the next cw is transmitted. The CW log file can be used for delayed decoding of this channel. This is also called offline decoding. Watch this [http://www.youtube.com/watch?v=-K--PEFYBng]<br />
<br />
Oscam creates a new *.cwl file for each channel and each day. The file name contains the date, service ID and service name, e.g. 110808_I000B_Sky_Cinema_+1.cwl with this contents:<br />
<br />
<syntaxhighlight lang="bash"><br />
# OSCam cardserver v0.99.4 - http://streamboard.gmc.to:8001/oscam/wiki<br />
# control word log file for use with tsdec offline decrypter<br />
# DATE 2011-08-08, TIME 23:49:10, TZ CEST<br />
# CAID 0x1702, SID 0x000B, SERVICE "Sky_Cinema_+1"<br />
1 9E E3 BB 3C A4 C3 BE 25 # 23:49:10<br />
0 D0 24 B3 A7 95 82 3B 52 # 23:49:17<br />
1 A9 76 35 54 37 38 F3 62 # 23:49:23<br />
0 55 70 87 4C 22 26 C4 0C # 23:49:30<br />
1 F0 16 22 28 36 3A 03 73 # 23:49:38<br />
0 5D 83 44 24 8F C7 5D B3 # 23:49:44<br />
</syntaxhighlight><br />
<br />
All cws are logged if at least one user watches the channel. Please choose a path with enough space, since per day and channel some 10KB of data are created. A script that moves/deletes the log files regularly is recommended.<br />
<br />
Example:<br />
cwlogdir = /var/log/<br />
<br />
Default:<br />
cwlogdir = # [blank] no path for cw-log, logging disabled<br />
<br />
===== emmlogdir =====<br />
{{Optional/en}}<br />
<br />
Setting a path for emm-log. You can define with the "saveemm-*"-Parameters in oscam.server which EMMs should be logged.<br />
<br />
Example:<br />
emmlogdir = /var/log/<br />
<br />
Default:<br />
emmlogdir = # [blank] the config folder will be used for emm logging<br />
<br />
===== usrfile =====<br />
{{Optional/en}}<br />
<br />
Set a name für userfile<br />
<br />
Format of the userfile: <br />
date<br />
time<br />
CWs per second<br />
username<br />
IP address of client<br />
TCP/IP port<br />
CWs found<br />
CWs from cache<br />
CWs not found<br />
CWs ignored<br />
CWs timeout<br />
CWs tunneled<br />
login time in UNIX/POSIX format<br />
logout time in UNIX/POSIX format<br />
protocol<br />
<br />
Example:<br />
usrfile = userfile<br />
<br />
Default:<br />
usrfile = 0<br />
<br />
===== disableuserfile =====<br />
{{Optional/en}}<br />
<br />
Now it is crazy: Even if a logfile is switched on (see logfile), the userfile can be turned off!<br />
<br />
Example:<br />
disableuserfile = 1 # '''no''' userfile <br />
= 0 # '''userfile'''<br />
<br />
Default:<br />
disableuserfile = 0<br />
<br />
===== usrfileflag =====<br />
{{Optional/en}}<br />
<br />
Setting the logging-modus<br />
0 = Only login and logout will be logged<br />
1 = Each zapping from client will be logged<br />
Default is 0<br />
<br />
Example:<br />
usrfileflag = 1 # All will be logged<br />
<br />
Default:<br />
usrfileflag = 0 # Only login und logout will be logged<br />
<br />
===== saveinithistory =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn7128:07/02/2012</span><br />
<br />
Save SC init history to /tmp/.oscam/reader<number>. Needed to show entitlements.<br />
<br />
Example:<br />
saveinithistory = 1 # save to /tmp/.oscam/reader<number><br />
<br />
Default:<br />
saveinithistory = 0 # no save<br />
<br />
===== mailfile =====<br />
{{Optional/en}}<br />
<br />
mailfile = file<br />
<br />
define file saving NDS Videogard mail messages from provider. Default: [blank] none<br />
<br />
===== cacheex_mode1_delay =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:10050/11/30/2014</span><br />
<br />
cacheex_mode1_delay = CAID1:time,[CAID2:time]...<br />
<br />
delay in millisencons for asking cache exchange mode 1 readers, default: none<br />
<br />
===== disablemail =====<br />
{{Optional/en}}<br />
<br />
disablemail = 0|1<br />
<br />
disable saving NDS Videogard mail messages form provider. Default = 1 (disabled)<br />
<br />
===== sysloghost =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set remote syslog server will be activated. Messages will be sent to this IPv4 address. If not set remote syslog server not work.<br />
<br />
Example:<br />
sysloghost = 192.168.1.167<br />
<br />
===== syslogport =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10703:06/11/15</span><br />
<br />
If set ''sysloghost'' remote syslog server will be activated. Messages will be sent to this port. If not set port 514 is used as default. <br />
<br />
Example:<br />
syslogport = 515<br />
<br />
Default:<br />
syslogport = 514<br />
<br />
==== Reader ====<br />
<br />
===== enableled =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
LED-Support<br />
<br />
enableled = 0|1|2<br />
<br />
0 = LED support disabled (default)<br />
1 = LED support enabled for routers<br />
2 = LED support enabled for Qbox HD<br />
<br />
===== serialreadertimeout =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8541:03/13/2013</span><br />
<br />
'''Only using Serialreader!'''<br />
<br />
timeout for serial reader in milli-seconds<br />
<br />
Example:<br />
serialreadertimeout = 1200 # Timeout after 1200 milli-seconds<br />
<br />
Default:<br />
serialreadertimeout = 1500 # Timeout after 1500 milli-seconds<br />
<br />
===== waitforcards =====<br />
{{Optional/en}}<br />
<br />
wait for local SCs on startup before opening network ports<br />
<br />
Example:<br />
waitforcards = 0 # don't wait<br />
<br />
Default:<br />
waitforcards = 1 # wait<br />
<br />
===== waitforcards_extra_delay =====<br />
{{Optional/en}}<br />
<br />
waitforcards_extra_delay = milli seconds<br />
<br />
additional delay in milli seconds after waiting for local SCs on startup before opening nework ports<br />
<br />
default = 500<br />
<br />
===== preferlocalcards =====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn9605:03/29/2014</span><br />
<br />
try decoding on local cards first<br />
<br />
Example:<br />
preferlocalcards = 0 # local cards are used like remote reader<br />
preferlocalcards = 1 # prefer CacheEx sources <br />
preferlocalcards = 2 # prefer local cards<br />
<br />
Default:<br />
preferlocalcards = 1 # prefer CacheEx sources<br />
<br />
===== readerrestartseconds =====<br />
{{Optional/en}}<br />
<br />
waiting time in seconds beetween restarts<br />
<br />
Example:<br />
readerrestartseconds = 10 # waiting time 10 seconds<br />
= 0 # '''no restarts!'''<br />
<br />
Default:<br />
readerrestartseconds = 5 # waiting time 5 seconds<br />
<br />
===== block_same_ip =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_ip = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same ip address, default = 1<br />
0 = no reject<br />
<br />
===== block_same_name =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7215:07/27/2012</span><br />
<br />
block_same_name = 0|1<br />
<br />
1 = reject looping ECM's from clients to reader with the same name, default = 1<br />
0 = no reject<br />
<br />
==== Cache ====<br />
<br />
===== cachedelay =====<br />
{{optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] delay</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
cachedelay = 300<br />
<br />
Default:<br />
cachedelay = 0<br />
<br />
===== max_cache_time =====<br />
<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_time</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
===== max_cache_count =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache] max_count</span><br />
<br />
max_cache_count = count, default 1000<br />
<br />
maximum CWs in cache<br />
<br />
===== cacheexwaittime =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013</span><br />
<br />
cacheexwaittime = delay <br />
<br />
maximum wait time for a cache entry in milli seconds, default:50 <br />
<br />
===== cacheexenablestats =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:16/02/2013 move to [cache]</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== Client ====<br />
<br />
===== clienttimeout =====<br />
{{Optional/en}}<br />
<br />
value in milli-seconds for client process to wait for key<br />
<br />
Examples:<br />
clienttimeout = 10000 # after 10 seconds timeout<br />
clienttimeout = 10 # timeout after 10 milli-seconds! (see Tip below)<br />
clienttimeout = 8 # timeout after 8000 milli-seconds (= 8 seconds), see Tip below<br />
Default:<br />
clienttimeout = 5000 # timeout after 5000 milli-seconds (=5 seconds)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Values < 10 (so 1 to 9) are multiplicated with 1000, so a "5" results in 5000 ms.<br />
<br />
===== clientmaxidle =====<br />
{{Optional/en}}<br />
<br />
value for client process being idle before disconnect in seconds<br />
<br />
Example:<br />
clientmaxidle = 200 # Disconnect after 200 seconds<br />
= 0 # idle disconnect disabled<br />
<br />
Default:<br />
clientmaxidle = 120 # Disconnect after 120 seconds<br />
<br />
===== suppresscmd08 =====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35[cs3.57x]-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
==== fallbacktimeout ====<br />
{{Depends/en}}<br />
<br />
At several readers (see Chapter [reader] in oscam.server) one reader can be defined to them, for example in case of failure of the other readers, the traffic falls back.<br />
Maximum waiting time of the [[Cardserver]]s in milliseconds for primary [[Reader]], before [[Fallback]]-Reader (if any!) are questioned.<br />
<br />
Example:<br />
fallbacktimeout = 1500<br />
<br />
Default:<br />
fallbacktimeout = 2500<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' The value must be greater than the value in "serialreadertimeout", otherwise the default is used.<br />
<br />
<br />
==== fallbacktimeout_percaid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:8896/09/04/2013</span><br />
<br />
fallbacktimeout_percaid = milliseconds <br />
<br />
time falling back to CAID restricted fallback reader, default: 2500<br />
<br />
<br />
<br />
==== sleep ====<br />
{{Optional/en}}<br />
<br />
time waiting for inactive users in minues, can be overwritten per user in oscam.user<br />
<br />
Example:<br />
sleep = 5 # waiting time 5 minutes<br />
<br />
Default:<br />
sleep = # [blank] no waiting time<br />
<br />
==== serverip ====<br />
{{optional/en}}<br />
<br />
Bind service to specified IP-address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip =<br />
<br />
OSCam listen to all IP's<br />
<br />
==== bindwait ====<br />
{{Optional/en}}<br />
<br />
value in seconds to wait for bind request to complete. If OSCam within this time can not bind, he finished with "Bind Request failed".<br />
<br />
Causes may include:<br />
* Double assignment of ports<br />
* "crashed" OSCam has not released the ports again<br />
* OSCam was started serveral times while<br />
<br />
Example:<br />
bindwait = 20 # waiting time 20 seconds<br />
<br />
Default:<br />
bindwait = 120 # waiting time 120 seconds<br />
<br />
==== netprio ====<br />
{{Optional/en}}<br />
<br />
network priority - This sets the value of SO_PRIORITY on network connections. Basically this leads to setting the TOS fields of the sent IP packages so that QoS can be better used.<br />
<br />
Beispiel:<br />
netprio = 1 # Priority 1<br />
<br />
Default:<br />
netprio = 0 # system given<br />
<br />
==== resolvegethostbyname ====<br />
{{Optional/en}}<br />
<br />
set mode for DNS resolving: These are different libc calls to resolve dns names and some older systems have problems with the newer implementation ''getadressinfo'' (getadressinfo is also threadsafe whereas ''gethostbyname'' is not and thus it has some locks around) or have stripped them from their images (dbox2 was such a candidate I think) even though it is available at compile time. <br />
0 = getadressinfo (default)<br />
1 = gethostbyname<br />
<br />
Example:<br />
resolvegethostbyname = 1 # gethostbyname<br />
<br />
Default:<br />
resolvegethostbyname = 0 # adressinfo system given<br />
<br />
==== failbantime ====<br />
{{Optional/en}}<br />
<br />
time for IP based blocking for clients with an invalid login attempt in minutes<br />
<br />
Beispiel:<br />
failbantime = 5<br />
# IP will be blocked for 5 minutes. New logins are denied.<br />
# no clientthread will be created.<br />
<br />
Default:<br />
failbantime = 0 # failban off (default)<br />
<br />
==== failbancount ====<br />
{{Optional/en}}<br />
<br />
Failbancount = Number of allowed failed attempts with incorrect data <br />
= 0 (default) IP is now blocked on the first try with incorrect data!<br />
<br />
If within '''failbantime''' more than in '''failbancount''' allowed trials to be registered, the IP for the remainder failbantime is locked. After a period of failbantime are again full failbancount available. Failbancount is thus a relaxation of rules!<br />
<br />
==== dropdups ====<br />
{{Optional/en}}<br />
<br />
mode for duplicate client connections<br />
<br />
0 = mark client as duplicate, but don't disconnect them (default)<br />
1 = drop duplicate connections instead of marking as duplicate<br />
<br />
==== unlockparental ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn7289:08/27/2012</span><br />
<br />
'''Only Seca and Viaccess'''<br />
<br />
unlock parental mode option to disable pin code request for adult movie.<br />
In order to work properly, this option may required that you define the card PIN code in your card reader configuration.<br />
<br />
Example:<br />
unlockparental = 1 # parental lock mode disabled<br />
<br />
Default:<br />
unlockparental = 0 # parental lock mode enabled<br />
<br />
==== double_check ====<br />
{{Optional/en}}<br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other, lb_nbest_readers must be set to 2 or higher<br />
<br />
Example:<br />
double_check = 1 # on<br />
<br />
Default:<br />
double_check = 0 # off<br />
<br />
==== double_check_caid ====<br />
{{Optional}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:7237/08/05/2012</span><br />
<br />
double_check_caid = [CAID1|first two digits of CAID1],[CAID2|first two digits of CAID2]... <br />
<br />
ECM will be send to two or more readers with the same SC and the CWs will be verified against each other for defined CAID or first two bytes of CAID, lb_nbest_readers must be set to 2 or higher, default:none <br />
<br />
<br />
<br />
==== Loadbalancer ====<br />
<br />
===== lb_mode =====<br />
{{Optional/en}}<br />
<br />
'''loadbalance mode'''<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' If load balancing is activated here, it may in oscam.server among services and ident are '''no entries'''!<br />
<br />
If there are 2 or more of the same SC, the load can be distributed evenly on the cards. For more see [[OSCam/en/Loadbalancing|Loadbalancing]]<br />
<br />
Example:<br />
lb_mode = 0 loadbalance disabled, ECMs go to all readers<br />
lb_mode = 1 fastest reader first, after 5 ECMs the reader with the fastest response time will be selected<br />
lb_mode = 2 oldest reader first, reader with the longest no answer<br />
lb_mode = 3 lowest usage level, the usage level will be calculated by the sum of 5 ECMS response times, the higher a reader is busy, the higher is usage level<br />
lb_mode = 10 LB is switched off, but statistics are build<br />
<br />
<br />
Default:<br />
lb_mode = 0 # disabled<br />
<br />
===== lb_save =====<br />
{{Optional/en}}<br />
<br />
Save autoloadbalance statistics (counts). To save CPU power a minimum counts of 100 is recommended.<br />
<br />
Example:<br />
lb_save = 100 # counts of ECM's after statistics are saved<br />
<br />
Default:<br />
lb_save = 0 # no svae<br />
<br />
===== lb_nbest_readers =====<br />
{{Optional/en}}<br />
<br />
set count of best readers for loadbalancing.<br />
<br />
Example:<br />
lb_nbest_readers = 2 # requests always go to two reader<br />
<br />
Default:<br />
lb_nbest_readers = 1 # requests go to one reader<br />
<br />
===== lb_nfb_readers =====<br />
{{Optional/en}}<br />
<br />
set count of fallback readers for loadbalancing<br />
<br />
Example:<br />
lb_nfb_readers = 2 # two fallbackreader<br />
<br />
Default:<br />
lb_nfb_readers = 1 # one fallbackreader<br />
<br />
===== lb_reopen_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8642:05/10/2013</span><br />
<br />
lb_reopen_mode = 0|1<br />
<br />
loadbalancing reopen readers mode:<br />
= 0 # standard late reopening of blocker readers (default)<br />
= 1 # fast reopening of blocker readers<br />
<br />
===== lb_nbest_percaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5893:08/19/2011</span><br />
<br />
Set count of best readers per CAIDs for loadbalancing, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
<br />
lb_nbest_percaid = # number<br />
= [blank] # none (default)<br />
<br />
example: <br />
lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 <br />
(wildcard CAIDs 03xx and 04xx)<br />
<br />
===== lb_reopen_invalid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_reopen_invalid = 0|1<br />
<br />
0 = E_INVALID wiil be blocked until statistics has been cleaned<br />
1 = default<br />
<br />
===== lb_force_reopen_always =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9885:09/30/2014</span><br />
<br />
lb_force_reopenalways = 0|1<br />
<br />
1 = force reopening immidiatly all failing readers if no matching was found<br />
0 = default<br />
<br />
===== lb_min_ecmcount =====<br />
{{Optional/en}}<br />
<br />
minimal ECM count to evaluate loadbalancing values<br />
<br />
Example:<br />
lb_min_ecmcount = 2 # 2 counts<br />
<br />
Default:<br />
lb_min_ecmcount = 5 # 5 counts<br />
<br />
===== lb_max_ecmcount =====<br />
{{Optional/en}}<br />
<br />
Maximum ECM count before resetting loadbalancing values.<br />
<br />
Example:<br />
lb_max_ecmcount = 200 # 200 counts<br />
<br />
Default:<br />
lb_max_ecmcount = 500 # 500 counts<br />
<br />
===== lb_reopen_seconds =====<br />
{{Optional/en}}<br />
<br />
time in seconds between retrying failed readers/CAIDs/providers/services<br />
<br />
Example:<br />
lb_reopen_seconds = 500 # retry after 500 seconds<br />
<br />
Default:<br />
lb_reopen_seconds = 900 # retry after 900 seconds<br />
<br />
===== lb_retrylimit =====<br />
{{Optional/en}}<br />
<br />
Retry next readers '''only''' if response time is higher then lb_retrylimit in '''milli seconds'''.<br />
<br />
Example:<br />
lb_retrylimit = 500 # retry next reader only, if response time is higher than 500 ms<br />
<br />
Default:<br />
lb_retrylimit = 800<br />
<br />
===== lb_savepath ===== <br />
{{Optional/en}}<br />
<br />
Filenanme for saving loadbalancing statistics<br />
<br />
default = /tmp/.oscam/stat<br />
<br />
===== lb_stat_cleanup ===== <br />
{{Optional/en}}<br />
<br />
hours after the loadbalancing statistics will be deleted<br />
<br />
default = 336<br />
<br />
===== lb_use_locking =====<br />
{{Optional/en}}<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn6166:12/28/2011</span><br />
<br />
disable parallel and identical ECM requests<br />
<br />
<br />
1 = on<br />
0 = off # default:0<br />
<br/><br />
'''Schlocke:'''<br />
* You should choose this option only if:<br />
** slow system<br />
** high load<br />
** the same ECM requests come not from the cache, but will continue to the confirmed reader.<br />
<br />
* Adventages, if activated:<br />
** By synchronizing, an ECM request made by one. The identification of cache or request and assignment of the reader by loadbalancer is always successful.<br />
<br />
* Disadventages, if activated:<br />
** The synchronisation prevents multithreading and the probability of higher response times.<br />
<br />
* Adventages, if NOT activated:<br />
** Faster transit times for ECM requests<br />
<br />
* Disadventages, if NOT activated:<br />
** May have dual (n-fold) possible requests to the readers.<br />
<br/><br />
<br />
===== lb_retrylimits =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn:5754:07/31/2011</span><br />
<br />
lb_retrylimits = CAID1:time1[,Caid2:time2]...<br />
<br />
loadbalancing retry limit time per CAID in milliseconds, wilcard CAIDs with 2-digit Caids possible<br />
<br />
default = none<br />
<br />
example: <br />
lb_retrylimits = 12:0100,34:0200,5678:0300 <br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
===== lb_noproviderforcaid =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 5758:08/01/2011</span><br />
<br />
lb_noproviderforcaid = CAID1[,CAID2]...<br />
<br />
ignore provider information CAIDs to reduce statistic date, wildcard CAIDs with two-digit CAIDs possible<br />
<br />
example: <br />
lb_noproviderforcaid = 12,34,5678<br />
(wildcard CAIDs 12xx and 34xx)<br />
<br />
default = none<br />
<br />
===== lb_auto_timeout =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout = 0|1<br />
<br />
lb_auto_timeout = 1 # enable automatic timeout based on load balancing statistics<br />
= 0 # default<br />
<br />
===== lb_auto_timeout_p =====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_p = percent<br />
<br />
percent added to average time as timeout time<br />
default = 30<br />
<br />
===== lb_auto_timeout_t ===== <br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7564:10/02/2012</span><br />
<br />
lb_auto_timeout_t = milli seconds<br />
<br />
minimal time added to average time as timeout time<br />
default = 300<br />
<br />
===== lb_max_readers =====<br />
{{Optional/en}}<br />
<br />
lb_max_readers = limit (number)<br />
<br />
restrict the reader count to limit during learning<br />
<br />
0 = unlimited (default)<br />
x = restrict loadbalancer readers to limit x (number)<br />
<br />
===== lb_auto_betatunnel =====<br />
{{Optional/en}}<br />
<br />
lb_auto_betatunnel = 0|1<br />
<br />
enable automatic Betacrypt tunneling for CAIDs 1801, 1833, 1834 and 1835 in loadbalancing mode<br />
lb_auto_betatunnel = 0 # disabled<br />
= 1 # enabled (default)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:''' Betacrypt definition in oscam.user with betatunnel will be prefered [[streamboard:wiki/OSCam/en/Config/oscam.user#betatunnel|User-Betatunnel]]!<br />
<br />
===== lb_auto_betatunnel_mode =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 7784:10/22/2012</span><br />
<br />
lb_auto_betatunnel_mode = 0|1|2...<br />
<br />
set mode for automatic Betacrypt tunneling<br />
<br />
0 = CAID 18XX tunneling to CAID 17X2 only (default)<br />
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) <br />
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) <br />
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) <br />
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) <br />
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) <br />
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only) <br />
<br />
<br />
===== lb_auto_betatunnel_prefer_beta =====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6045:11/27/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7768:10/21/2012</span><br />
<br />
lb_auto_betatunnel_prefer_beta = number<br />
<br />
Hier kann der Schwerpunkt für die automatische Auswahl von Betacrypt/Nagravision gewählt werden.<br />
<br />
0 = disabled (default<br />
1 = always Betacrypt<br />
105 = represents the middle<br />
200 = always Nagravision<br />
<br />
=== Monitor ===<br />
'''Only if monitor is used!'''<br />
<br />
{{OSCamConfMonitorParameter}}<br />
<br />
==== port ====<br />
{{Optional/en}}<br />
UDP port for monitor<br />
port = 0 # monitor disabled<br />
= # port number<br />
<br />
Beispiel:<br />
port = 24480 # monitor on, port = 24480<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
serverip = # IP adress<br />
= # [blank] all IP's (default)<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured monitor connection<br />
[,IP address|IP address range]...<br />
<br />
Possible<br />
* one or more IP adresses<br />
* one or more IP adress ranges<br />
* mixture of IP adresses and IP adress ranges<br />
<br />
Example<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
= Host 127.0.0.1 and IP range 192.168.0.0 to 192.168.255.255<br />
<br />
Default<br />
nocrypt = # [blank] no secured monitor connection<br />
<br />
==== aulow ====<br />
{{Optional/en}}<br />
<br />
time no EMM occurs so that client is set to low in minutes<br />
<br />
Example<br />
aulow = 30 # After 30 minutes whithout EMM client will be switched from "active" to "on" (default).<br />
<br />
==== monlevel ====<br />
{{Optional/en}}<br />
<br />
monitor-level<br />
0 = no access to monitor (default)<br />
1 = only server and own procs<br />
2 = all procs, but viewing only<br />
3 = all procs, reload of oscam.user possible<br />
4 = complete access<br />
<br />
Example<br />
monlevel = 4 # complete access<br />
<br />
monlevel can be overwritten per user in oscam.user!<br />
<br />
==== appendchaninfo ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8546:03/13/2013<br />
</span><br />
<br />
Append channel name on log messages. Very useful when using [webif]!<br />
appendchaninfo = 1 # append chanel name<br />
= 0 # no append chanel name (default)<br />
<br />
=== lcd ===<br />
{{OSCamConfLCDParameter}}<br />
<br />
==== enablelcd ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6285:01/23/2012</span><br />
<br />
enablelcd = 0|1<br />
<br />
0 = default<br />
1 = enable LCD<br />
<br />
==== lcd_outputpath ====<br />
{{Optional/en}}<br />
<br />
Path for LCD output<br />
<br />
Default:<br />
lcd_outputpath = [blank] /tmp<br />
<br />
==== lcd_hideidle ====<br />
{{Optional/en}}<br />
<br />
hide reader in LCD output if reader idle > 20 seconds, default:0 <br />
<br />
<br />
==== lcd_writeinterval ====<br />
{{Optional/en}}<br />
<br />
LCD refresh interval (minimum 5), default:10<br />
<br />
=== WebIf ===<br />
'''Only if WebIf is used!'''<br />
<br />
{{OScamConfWebIfParameter}}<br />
<br />
==== File format to send EMMs via the webinterface ====<br />
(by Bit)<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention'''<br />
<br />
* File has to be in TXT format.<br />
* The EMM-file should contain each PRE-CAM EMM in a new line.<br />
* EMMs should be in HEX representation.<br />
** Example: AABBCCDD...<br />
*Spaces and tabs between the bytes are allowed:<br />
**AA BB CC DD...<br />
*The HEX representation of each EMM's byte can be represented by upper or lower case - even mixed is allowed:<br />
**AA aa Aa aA...<br />
*Other chars and comments are not allowed.<br />
<br />
==== httpport ====<br />
{{Optional}}<br />
<br />
default is 8888 if no httpport is set<br />
port for web interface,<br />
0 = disabled, praefix + = enable SSL<br />
<br />
Example<br />
httpport = 83 # Webinterface listening on '''http-port 83'''<br />
= +83 # Webinterface listening on '''https-port 83''' (SSL)<br />
0 # Webinterface disabled<br />
<br />
==== httpcert ====<br />
{{Optional/en}}<br />
<br />
file for http SSL certificate<br />
httpcert = oscam.cert # (look there)<br />
= # [blank] file oscam.pem (embedded) is used<br />
<br />
==== httpforcesslv3 ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:6321/01/30/2012</span><br />
<br />
httpforcesslv3 = 0|1<br />
<br />
example<br />
httpforcesslv3 = 0 none (default)<br />
= 1 force using SSLV3<br />
<br />
==== httpuser ====<br />
{{Optional/en}}<br />
<br />
Username for password protection. [blank] is default, of which is strongly discouraged! <br />
httpuser = # xyxyxy (all characters and figures are allowed)<br />
<br />
==== httppwd ====<br />
{{Optional/en}}<br />
<br />
Password for password protection. It is the same as for httpuser.<br />
httppwd = # 123456<br />
<br />
'''The ''user'' and ''pwd'' parameters are queried when connecting to the webinterface in a messagebox. If they are missing ore corrupted a message ''Forbidden'' appears and the connection is aborted!'''<br />
<br />
==== http_prepend_embedded_css ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6797:05/13/2012</span><br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6625:05/15/2012</span><br />
<br />
<br />
http_prepend_embedded_css = 0 | 1<br />
http_prepend_embedded_css = 0 # Do not add the content of the embedded CSS before the content of the custom CSS (default)<br />
1 # embedded CSS will be added before external custom CSS (specified by the [[#httpcss|httpcss]] parameter)<br />
<br />
This parameter can be used to override the embedded CSS with custom styles. To see the current CSS styles use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
==== httpcss ====<br />
{{Optional/en}}<br />
<br />
path for external CSS file<br />
<br />
For webinterface different styles are available. Put custom CSS files (ending with .css extension) in the oscam config directory to managed your custom styles with WebIf.<br />
<br />
Example<br />
httpcss = # /etc/oscam/harvest_round_Firefox.css<br />
= # [blank] embedded style is used (default)<br />
<br />
To see the current CSS style, use the url: http://''url_to_oscam_webif'''''/site.css'''<br />
<br />
Styles you find here: [[Streamboard-Thread:30083|Streamboard-Thread]]<br />
<br />
==== httptpl ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 7083:06/25/2012</span><br />
<br />
path for external templates and picons<br />
httptpl =<br />
= # [blank] No external templates<br />
<br />
path for external templates and picons, multiple simultaneously templates and picons are possible by creat‐ <br />
ing sub folders (maximum length of 32 alphanumeric characters), sub folders naming is corresponding to sub <br />
folder in URL, default:none <br />
<br />
example <br />
httptpl = /this/is/my/path <br />
<br />
folder with multiple templates: <br />
/this/is/my/path/template<br />
/this/is/my/path/template2 <br />
<br />
valid URLs: <br />
http://host:port/template1 <br />
http://host:port/template2<br />
<br/><br />
<br/><br />
==== httpoverwritebakfile ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9858:09/21/2014</span><br />
<br />
httpoverwritebakfile = 0|1<br />
<br />
1 = overwrite backup configurations files (*.bak)<br />
0 = default<br />
<br/><br />
<br/><br />
<br />
<br />
<br />
==== httplocale ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9828:08/15/2014</span><br />
<br />
httplocale = environment<br />
<br />
set the "locale environment"<br />
<br />
default = blank [none]<br />
<br />
look here::<br />
<br />
http://en.wikipedia.org/wiki/locale<br />
<br />
==== httpjscript ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6806:05/14/2012</span><br />
<br />
httpjscript = path<br />
<br />
path for oscam.js javascript, def: none<br />
<br />
<br />
==== httprefresh ====<br />
{{Optional/en}}<br />
<br />
status refresh in seconds<br />
<br />
httprefresh = 7 # status will be refreshed after 7 seconds<br />
= # [blank] no refreshing<br />
<br />
==== httppollrefresh ====<br />
{{Optional/en}}<br />
<br />
refreshtime for polling in seconds<br />
<br />
httppollrefresh = 60 # polling will be refreshed after 60 seconds<br />
= # [blank|0] no refreshing poll<br />
<br />
==== httpshowpicons ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6648:05/01/2012</span><br />
<br />
httpshowpicons = 0| 1<br />
httpshowpicons = 1 # show picons in userlist<br />
0 # default<br />
<br />
If this parameter is enables, then a new column is added to the USERS tab which display the picons of the last watched channels by active users. The folder where the picons must be configured in the httppiconpath.<br />
<br />
Possible format are:<br />
IC_caid_srvid.tpl<br />
IC_caid_provid_srvid.tpl<br />
IC_servicename.tpl<br />
<br />
added support for picons by channel name<br /><br />
syntax is:<br /><br />
take service-name from oscam.srvid,<br /><br />
replace all upper-case letters with lower case,<br /><br />
replace * with star,<br /><br />
replace & with and,<br /><br />
replace + with plus,<br /><br />
remove everything but a-z and 0-9,<br /><br />
if the result is name, the picon file will be IC_name.tpl<br /><br />
for example:<br /><br />
service-name "BBC-ONE +HD"<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
if service-name ends with hd, and picon is not found, fallback to name without hd, example:<br /><br />
picon file: "IC_bbconeplushd.tpl"<br /><br />
-> not found, search for:<br /><br />
picon file: "IC_bbconeplus.tpl"<br /><br />
<br />
==== httphideidleclients ====<br />
{{Optional/en}}<br />
<br />
Enables hiding clients after idle time set with parameter ''' hideclient_to''' in section [monitor].<br />
httphideidleclients = 1 # hide<br />
= 0 # hide not (default)<br />
<br />
==== hideclient_to ====<br />
{{Optional/en}}<br />
<br />
Time to hide clients in the monitor if not sending requests. See also parameter '''httphideidleclienst''' in section [webif].<br />
hideclient_to = 1 # hide clients<br />
= 0 # no hide<br />
<br />
==== httphidetype ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8937:09/27/2013</span><br />
<br />
httphidetype = type[type]...<br />
<br />
type = letter which defines types to hide in web interface status page (see Typ column), <br />
default: none. s = server, h = http, m = monitor, r = reader, p = proxy, x = cacheex, c = client <br />
<br />
httphidetype = sh #hide server- and http-type columns<br />
httphidetype = [blank] # hide none (default)<br />
<br />
==== httpscript ====<br />
{{Optional/en}}<br />
<br />
Path to an executable script which you wish to start from web interface<br />
httpscript = # path<br />
= # [blank] no path<br />
<br />
You can run script file from script.html (SCRIPTS item in main menu)<br /><br />
If the script file contains the "echo" will be it displayed in a Web interface.<br />
<br />
If the file can not run displays<br />
[Error]: Script "name_of_script.sh" not executable!<br />
<br />
If does not exist script displays<br />
[Error]: Script "name_of_script.sh" not found!<br />
(Works If you delete the script and refresh page)<br />
<br />
==== httpallowed ====<br />
{{required}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8733:06/27/2013</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8842:08/17/2013</span><br />
<br />
http web interface connections allowed. [blank] is allowed (default), but that makes no sense! If the webinterface to be used, then there must be a way to connect with him. Therefore we declare this parameter as '''mandatory'''!<br />
<br />
With '''::1''' OSCam decides to resolve 'localhost' to '''IPv6'''!<br />
<br />
IP address|IP address range[,IP address|IP address range,[::1]]...<br />
<br />
<br />
<br />
Example<br />
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
= 127.0.0.1,192.168.0.0-192.168.255.255,::1 # Host and range 192.168.0 are allowed<br />
resolving to IPv6<br />
<br />
'''default values'''<br />
127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1<br />
<br />
==== httpdyndns ====<br />
{{Optional/en}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6558:03/21/12</span><br />
<br />
http web interface connections allowed<br />
<br />
httpdyndns = hostname [,hostnahme][,hostname]<br />
<br />
Example<br />
httpdyndns = host1.example.com,host2.example.com<br />
<br />
==== httpsavefullcfg ====<br />
{{Optional/en}}<br />
<br />
write config:<br />
0 = all not empty parameters, all not default parameters, all parameters not containing the same value as the same parameter in global configuration (default)<br />
1 = all parameters<br />
<br />
<br />
<br />
==== httpreadonly ====<br />
{{Optional/en}}<br />
<br />
read only modus for web interface<br />
<br />
httpreadonly = 1 # only read<br />
= 0 # all is possible (default)<br />
<br />
<br />
==== httppiconpath ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn:9463/01/28/2014</span><br />
<br />
httppiconpath = path<br />
<br />
path to picons, default [blank] none<br />
<br />
====httphelplang====<br />
{{required}}<br />
<br />
set right language for wiki entry point<br />
de|en|fr <available wiki languages><br />
<br />
==== httposcamlabel ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9463:01/28/2014</span><br />
<br />
httposcamlabel = text<br />
<br />
set individual label in web interface header, default: OSCam<br />
<br />
==== http_status_log ====<br />
{{Optional/en}}<br />
<br />
http_status_log = 0|1<br />
1 = display log in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowreaderinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowreaderinfo = 0|1<br />
1 = display readers informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowecminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowecminfo = 0|1<br />
1 = display readers and users ECM informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowuserinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowuserinfo = 0|1<br />
1 = display users informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowcacheexinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowcacheexinfo = 0|1<br />
1 = display CacheEX informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowmeminfo ====<br />
{{Optional/en}}<br />
<br />
httpshowmeminfo = 0|1<br />
1 = display memory usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
==== httpshowloadinfo ====<br />
{{Optional/en}}<br />
<br />
httpshowloadinfo = 0|1<br />
1 = display load average and CPU usage informations in Status screen<br />
0 = do not show (default)<br />
<br />
<br/><br />
<br/><br />
<br />
=== [cache] ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW since svn 8358:02/16/2013</span><br />
<br />
{{OSCamConfCacheParameter}}<br />
<br />
<br />
==== delay ====<br />
{{optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
Value to delay cached requests<br />
<br />
Example:<br />
delay = 300<br />
<br />
Default:<br />
delay = 0<br />
<br />
==== max_time ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
max_cache_time = seconds, default: 15<br />
<br />
maximum time CWs resist in cache after 1st client request, the time must be 2 seconds higher than the parameter clienttimeout.<br />
<br />
==== max_hit_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8910:09/10/2013</span><br />
<br />
max_hit_time = in seconds<br />
<br />
maximum time for cache exchange hits resists in cach for evaluating wait_time, default: 15<br />
<br />
<br />
<br />
==== wait_time ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6142:12/25/2011</span><br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn 8077:01/06/2013</span><br />
<br />
wait_time = milli-seconds<br />
= [blank] none (default)<br />
<br />
wait time for cache exchange (mode 2 & 3 only!)and Cardserverproxy before sending ECM to reader or proxy<br />
<br />
Example:<br />
0:50:250,0200@00009X:50:150:950,0500@000001:150:1602&ffdf:1200<br />
<br />
==== cacheex_cw_check ====<br />
{{Optional/en}}<br />
<br />
cacheex_cw_check = caid[&mask][@provid][$servid]:mode:counter[,n]<br />
<br />
* mode:<br />
specify behaviour for counter parameter<br />
<br />
0 = when wait_time expires, serve highest counter's cw got anyway, even if no counter reached.<br />
1 = never serve cw (coming from cacheex) stored in cache if its counter not reaches counter. When wait_time expires, requests<br />
will go to normal readers! Only when a cw reaches counter, it can be served to clients.<br />
<br />
Default = 0<br />
<br />
<br />
* counter:<br />
set minimum cw counter to allow cw is used.<br />
<br />
Default = 1 (use default behaviour: use cw with highest counter when cache is checked)<br />
<br />
==== cwcycle_allowbadfromffb ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8930:09/25/2013</span><br />
<br />
cwcycle_allowbadfromffb = 0|1<br />
<br />
1 = allow bad cycles from a fixed fallback reader. Default = 0<br />
<br />
<br />
<br />
==== cacheexenablestats ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
cacheexenablestats = 0|1<br />
<br />
1 = enable statistics for cach exchange mode<br />
0 = default<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Warning:''' Please consider memory consumption!<br />
<br />
==== csp_port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8358:02/16/2013</span><br />
<br />
This is a UDP ('''not TCP''') listen port for incoming traffic from csp nodes<br />
<br />
csp_port = port<br />
= [blank] none (default)<br />
<br />
==== csp_serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
This is the local bind IP of csp_port (see above!)<br />
<br />
csp_serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6358:2/16/2013</span><br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
==== cwcycle_check_enable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_check_enable = 0 disable (default)<br />
= 1 enable<br />
<br />
==== cwcycle_check_caid ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention: not for all NDS SC's!'''<br />
<br />
cwcycle_check_caid = CAID[,CAID]...<br />
<br />
CAID enabled for CW cycle check, default: none<br />
<br />
==== cwcycle_maxlist ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_maxlist = count<br />
<br />
maximum CW cycle list entries, default = 500, maximum = 4000<br />
<br />
==== cwcycle_keeptime ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_keeptime = minutes<br />
<br />
minimum time a learned cycletime resists in memory, default = 0, maximum = 15<br />
<br />
==== cwcycle_onbad ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_onbad = 0|1<br />
0 = log bad CW cycle only <br />
1 = drop bad CW cycle (default)<br />
<br />
==== cwcycle_dropold ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8358:02/16/2013</span><br />
<br />
cwcycle_dropold = 0|1, <br />
1 = drop old CW cycle, <br />
0 = no drop(default)<br />
<br/><br />
==== cwcycle_sensitive ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 8509:03/07/2013</span><br />
<br />
cwcycle_sensitive = 0|2|3|4<br />
<br />
0 = disabled (default)<br />
2 = 2 (or more) same bytes and drop new CW<br />
3 = 3 (or more) same bytes and drop new CW<br />
4 = 4 (or more) same bytes and drop new CW<br />
<br />
<br/><br />
==== cwcycle_usecwcfromce ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9038:11/18/2013</span><br />
<br />
cwcycle_usecwcfromce = 0|1<br />
<br />
1 = use CW Info from cache exchange<br />
0 = default<br />
<br/><br />
<br />
==== wait_until_ctimeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 9486:02/03/2014</span><br />
<br />
wait_until_ctimeout = 0|1<br />
<br />
answer when cache exchange timeount expires, if no normal readers are vavailable for sending ECM's::<br />
<br />
0 = immediatly send '''not found''' to client (default)<br />
1 = wait for cache exchange answer until client timeout expires<br />
<br />
<br/><br />
<br/><br />
<br />
<br/><br />
<br />
=== csp (UDP) ===<br />
Section only needed if using cache exchange<br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8358:02/16/2013 look at '''[cache]'''!</span><br />
<br />
<br />
{{OSCamConfcspParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6124:12/23/2011</span><br />
<br />
UDP listen port for incoming traffic from csp nodes<br />
<br />
port = port<br />
= [blank] none (default)<br />
<br />
==== serverip ====<br />
{{required}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn 6124:12/23/2011</span><br />
<br />
Local bind IP of the above udp port<br />
<br />
serverip = IP<br />
= [blank] none (default)<br />
<br />
==== csp_ecm_filter ====<br />
{{Optional/en}}<br />
<br />
csp_ecm_filter = [caid][&mask][@provid][$servid]<br />
<br />
==== csp_allow_request ====<br />
{{Optional/en}}<br />
<br />
csp_allow_request = 0|1 default = 1<br />
<br />
=== Camd 33 (TCP) ===<br />
Section required only if camd33 will be used as client protocol!<br />
<br />
{{OSCamConfCamd33Parameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for camd 3.3x clients, 0 = disabled, default:0<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # listenig to all<br />
<br />
==== nocrypt ====<br />
{{Optional/en}}<br />
<br />
unsecured camd 3.3x client connection<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
Example:<br />
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
nocrypt = [none]<br />
<br />
==== passive ====<br />
{{Optional/en}}<br />
<br />
force passive camd 3.3x client<br />
<br />
Camd3.3x protocol generally has aktive clients. In certain circumstances the client must switched on only "passive" mode.<br />
<br />
Example:<br />
passive = 1<br />
<br />
Default:<br />
passive = 0<br />
<br />
==== key ====<br />
{{Optional/en}}<br />
128 bit key<br />
<br />
key for camd 3.3x client encryption<br />
<br />
<br />
Example:<br />
key = 01020304050607080910111213141516<br />
<br />
Default:<br />
key = # (blank] none (default)<br />
<br />
=== cs357x (UDP) ===<br />
Section required only if cs357x will be used as client protocol! These protocols principle encrypt and build the key from user name.<br />
<br />
[[Datei:WarningS.png|text-bottom]] '''Attention:'''<br />
'''cs357x''' was also known as '''camd35''' designated. Both terms mean the same protocol with the same functions and parameters. In the future, to avoid confusion '''only cs357x''' is used.<br />
<br />
{{OSCamConfCs357xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
UDP port for camd 3.5x|cs357x clients. Port must be opened at router!<br />
<br />
Example:<br />
port = 15000<br />
= 0 # disabled (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell camd35|cs3.57x-clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disabled<br />
<br />
Can be overwritten in oscam.user!<br />
<br />
More here:: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== cs378x (TCP) ===<br />
Section required only if cs378x (camd 3.5x in TCP) will be used as client protocol!<br />
<br />
{{OSCamConfCs378xParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
Port(s) TCP for Cs378x clients (camd 3.5x in TCP mode). Port(s) must be opened at router!<br />
<br />
port@CAID[:ident][,ident]...[;port@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@0500:030B00;22764@0648<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = # [blank] all (default)<br />
<br />
==== suppresscmd08 ====<br />
{{Optional/en}}<br />
<br />
<br />
suppresscmd08 = 0|1<br />
<br />
0 = tell cs3.78x clients not to request again for rejected CAID, service ID and provider ID combination (default)<br />
1 = disable<br />
<br />
<br />
Mor here: [[Streamboard-Thread:27459|Streamboard-Thread]]<br />
<br />
=== Newcamd (TCP) ===<br />
Section required only if newcamd will be used as client protocol!<br />
<br />
{{OSCamConfNewcamdParameter}}<br />
<br />
==== key ====<br />
{{required}}<br />
DES key<br />
Default key for newcamd client encryption.<br />
<br />
Example:<br />
key = 0102030405060708091011121314<br />
<br />
Default:<br />
key =<br />
<br />
==== port ====<br />
{{required}}<br />
TCP port/DES key/CAID/ident definitions. Each CAID requires a separate port. If you don't specify a DES key for a port, the default DES Key will be used!<br />
<br />
port[{DES key}]@CAID[:ident][,ident]...[;port[{DES key}]@CAID[:ident][,ident]...]...<br />
<br />
Example:<br />
port = 15000@1234:000000 # (CAID 1234 connected with port 15000)<br />
port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 connected with port 15000. CAID 5678 with port 15001)<br />
<br />
Default:<br />
port = port@caid:ident<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.168.178.1<br />
<br />
Default:<br />
serverip = [blank]<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP address|IP address range[,IP address|IP address range]...<br />
<br />
!! Dyn DNS Addresses are not forseen here and won't work !!<br />
<br />
Example:<br />
allowed = 127.0.0.1,192.168.0.0-192.168.255.255<br />
<br />
Default:<br />
allowed = [blank]<br />
<br />
==== keepalive ====<br />
{{Optional/en}}<br />
<br />
Example:<br />
keepalive = 1 # (enabled)<br />
keepalive = 0 # (disabled)<br />
<br />
Default:<br />
keepalive = 0<br />
<br />
==== mgclient ====<br />
{{Optional/en}}<br />
<br />
Enable mgcamd extended newcamd protocol, allowing for a single connection to work with mutliple providers, default:0<br />
<br />
Example:<br />
mgclient = 1 # (enabled)<br />
mgclient = 0 # (disabled)<br />
<br />
Default:<br />
mgclient = 0<br />
<br />
<br/><br />
<br/><br />
=== '''scam''' ===<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9878:09/29/2014</span><br />
<br />
{{OSCamConfSCamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port = port<br />
<br />
UDP port for scam server, default = 0<br />
<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br/><br />
<br/><br />
<br />
=== Radegast ===<br />
Section required only if radegast will be used as client protocol!<br />
<br />
{{OSCamConfRadegastParameter}}<br />
==== port ====<br />
{{required}}<br />
<br />
TCP/IP port for radegast clients (enables radegast)<br />
port =<br />
= 0 (default)<br />
<br />
==== serverip ====<br />
{{Optional/en}}<br />
bind service to specified IP address<br />
<br />
Example:<br />
serverip = 192.162.9.1<br />
= [blank] alle IP'as allowed (default)!<br />
<br />
==== allowed ====<br />
{{Optional/en}}<br />
<br />
client connections allowed from<br />
IP addres|IP range[,IP address|IP range]...<br />
<br />
Example:<br />
127.0.0.1,192.168.0.0-192.168.255.255 # Host and range 192.168.0 are allowed<br />
<br />
==== user ====<br />
{{required}}<br />
<br />
user name for radegast client<br />
user = username<br />
<br />
=== Serial ===<br />
Section required only if seral interface will be used!<br />
<br />
{{OSCamConfSerialParameter}}<br />
<br />
==== device ====<br />
{{Optional/en}}<br />
<br />
Parameter of device<br />
device = <user>@<device>[:baud][?option1=value1][?option2=value2]<br />
<br />
Parameter<br />
user = account<br />
device = name of Serial Device<br />
option = timeout = milli seconds timeout for connection default: 50<br />
= delay milli seconds additive between 2 characters<br />
<br />
supported serial devices<br />
HSIC Humax Sharing Interface Client<br />
SSSP Simple Serial Sharing Protocol<br />
bomba BOMBA Firmware<br />
dsr9500 DSR 9500<br />
<br />
=== Cccam (TCP) ===<br />
Section required only if Cccam will be used as client protocol!<br />
{{OSCamConfCccamParameter}}<br />
<br />
==== port ====<br />
{{required}}<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn6206:01/07/2012</span><br />
<br />
Port = 0|port[,port...]<br />
<br />
TCP/IP-Ports for CCcam clients, enables Cccam protocol!<br />
<br />
port =<br />
= 0 # CCcam-Protokoll disabled (default)<br />
<br />
==== version ====<br />
{{Optional/en}}<br />
<br />
<br />
define CCcam version, minimum CCcam version 2.0.11, used with original CCcam only, default:none<br />
<br />
<nowiki><main version>,<version>,<sub version></nowiki><br />
<br />
Example:<br />
version = 2.0.11<br />
<br />
==== reshare ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Blue;color:White;padding:0 5px;">CHANGE svn8607:04/10/2013</span><br />
<br />
<br />
<br />
reshare level for CCcam clients:<br />
-1 = no resharing<br />
0 = resharing for direct peer only<br />
1 = resharing for direct peer and next level<br />
x = resharing for direct peer and next x level (x for number of level)<br />
10 = (default)<br />
<br />
Example:<br />
reshare = 1 resharing only for direct peer and next level<br />
<br />
reshare could be defined on 2 ways:<br />
<br />
* reader ("cccreshare")<br />
* user-account ("cccreshare")<br />
<br />
A cards reshare value is set to the smallest value of the 2 parameters !<br />
<br />
==== reshare_mode ====<br />
{{Optional/en}}<br />
<br />
CCcam reshare mode<br />
0 = reader reshares only received SCs for CCcam readers,<br />
defined filters/CAIDs/idents on other readers (default)<br />
1 = reader reshares received SCs (like=0) and defined services<br />
2 = reader reshares only defined reader services as virtual SCs<br />
3 = reader reshares only defined user services as virtual SCs<br />
4 = reader reshares only received cards<br />
<br />
Every server is shared as hop=0 and with defined reshare values.<br />
<br />
Service reshare only works if positive services defined: no service - no reshare!<br />
<br />
==== ignorereshare ====<br />
{{Optional/en}}<br />
<br />
<br />
CCcam reshare setting:<br />
0 = use reshare setting of server (default)<br />
1 = use reshare setting of reader or user<br />
<br />
Example:<br />
ignorereshare = 1 reshare settings of reader or user are used<br />
<br />
==== stealth ====<br />
{{Optional/en}}<br />
<br />
Behaviour like the original CCcam: no activate partner detection and extended OSCam-CCcam protocol, prevent other OSCam to detect the server as OSCam server.<br />
<br />
stealth = 1 # stealth enabled<br />
= 0 # stealth disabled (default)<br />
<br />
==== minimizecards ====<br />
{{Optional/en}}<br />
<br />
mode how to provide CCcam servers to CCcam clients:<br />
0 = no aggregation, remove duplicates only (default)<br />
1 = based on minimum hop: two SCs with different hops are summarized, new SCs get a smaller hop<br />
<br />
<br />
==== updateinterval ====<br />
{{Optional/en}}<br />
<br />
<br />
interval to provide share list update to CCcam clients in seconds<br />
0 = update based on server updates, values <= 10 are invalid and will be set to 30 <br />
= [blank] 240 (default)<br />
<br />
==== keepconnected ====<br />
{{Optional/en}}<br />
<br />
set CCcam keepalive modus:<br />
0 = disconnect client when max idle time is reached<br />
1 = keep client connected (default)<br />
<br />
==== recv_timeout ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7672:10/09/2012</span><br />
<br />
recv_timeout = milli-seconds<br />
<br />
set network timeout for receiving data<br />
default = 2000<br />
<br />
==== forward_origin_card ====<br />
{{Optional/en}}<br />
<br />
forward_origin_card = 0|1<br />
<br />
1 = forward ECM request to reader holding this card, loadbalancer, fallback and caching will be disabled <br />
0 = default<br />
<br />
==== nodeid ====<br />
{{Optional/en}}<br />
<br />
nodeid = ID<br />
<br />
set CCcam node ID in hex, default:none<br />
<br />
example<br />
nodeid = 0a0b0c0d0e0f1011<br />
<br/><br />
=== Pandora ===<br />
{{OSCamConfPandoraParameter}}<br />
<br />
==== pand_skip_send_dw ====<br />
<br />
<br />
pand_skip_send_dw = dummy<br />
<br />
<br />
==== pand_allowed ====<br />
<br />
<br />
pand_aloowed = dummy<br />
<br />
<br />
==== pand_usr ====<br />
<br />
<br />
pand_user = dummy<br />
<br />
<br />
==== pand_pass ====<br />
<br />
<br />
pand_pass = dummy<br />
<br />
<br />
==== pand_ecm ====<br />
<br />
<br />
pand_ecm = dummy<br />
<br />
<br />
==== pand_port ====<br />
<br />
<br />
pand_port = dummy<br />
<br />
<br />
==== pand_srvid ====<br />
<br />
pand_srvid = dummy<br />
<br />
<br/><br />
<br/><br />
<br />
=== GBox ===<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn8350:02/15/2013</span><br />
{{OScamConfGboxParameter}}<br />
<br/><br />
<br/><br />
'''Minimal working configuration example:'''<br />
<br />
Let's say the gbox runs on host 192.168.1.101 and OSCam is on 192.168.1.123. In file '''cwshare.cfg''' on gbox side we have, for example, the following lines::<br />
M: { 192.168.1.101 { A123BCDE }}<br />
D: { 192.168.1.123 { 3820 3819 { 98AF3E25 {3 3}}}}<br />
If oscam_gbox should connect to the original GBOX above, then you should configure OSCam as follows:<br />
'''oscam.conf:'''<br />
[gbox]<br />
hostname = 192.168.1.123<br />
my_password = 98AF3E25<br />
port = 3819<br />
<br />
'''oscam.server:'''<br />
[reader]<br />
protocol = gbox<br />
group = 1<br />
device = 192.168.1.101,3820<br />
password = A123BCDE<br />
user = gbox_client_1<br />
<br />
'''oscam.user:'''<br />
[account]<br />
user = gbox_client_1<br />
group = 1<br />
<br />
<br />
<br />
<br/><br />
<br/><br />
<br />
==== hostname ====<br />
{{required}}<br />
<br />
hostname = my IP or ddns<br />
<br />
examples:<br />
hostname = 192.168.1.120<br />
hostname = willy.noip.org<br />
<br />
<br/><br />
<br />
==== my_password ====<br />
{{required}}<br />
<br />
my_password = 4 hex bytes, 8 chara<br />
<br />
example:<br />
my_password = 98AF3E25<br />
<br />
<br/><br />
<br />
==== port ====<br />
{{required}}<br />
<br />
port= define incoming UDP port(s) used by Gbox protocol<br />
<br />
port= port#1[[,port#2]...[,port#32]]<br />
<br />
Maximum 32 ports.<br />
<br />
<br/><br />
<br />
==== proxy_card ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEU svn9721:05/15/2014</span><br />
<br />
proxy reader card(s) to be reshared into gbox network, default = none<br />
<br />
proxy_card = <CAID><provid>[,<CAID><provid>]...<br />
<br />
example:<br />
<br />
proxy_card = 18300000,0D950400,05050F00 <br />
<br />
<br/><br />
<br />
==== ccc_reshare ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9722:05/15/2014</span><br />
<br />
ccc_reshare = 0|1<br />
<br />
1 = enable cccam-cards to be reshared into gbox network, default = 0<br />
<br />
reshare level to be set per peer in oscam.server [reader]<br />
<br />
<br/><br />
<br />
==== my_vers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9645:04/09/2014</span><br />
<br />
<br />
my_vers = version<br />
<br />
set gbox version hexadecimal low byte<br />
<br />
default = 2A<br />
<br />
<br/><br />
<br />
==== my_cpu_api ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9712:05/11/2014</span><br />
<br />
<br />
my-cpu_api = byte<br />
<br />
set gbox CPU and API byte in hexadecimal, default = 40<br />
default = 40<br />
<br />
<br/><br />
<br />
==== gbox_reconnect ====<br />
{{Optional/en}}<br />
<br />
gbox_reconnect = time<br />
<br />
send hello message to peers in seconds, default:180, min:60, max:300<br />
<br />
<br/><br />
<br />
==== accept_remm_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11399:29/01/2018</span><br />
<br />
Accept to send Remote EMMs to specified Server Peer-IDs<br />
<br />
accept_remm_peer = peer#1[[,peer#2]...[,peer#8]]<br />
<br />
<br/><br />
<br />
==== dis_attack_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11360:16/02/2017</span><br />
<br />
Disable creation of attack.txt<br />
<br />
dis_attack_txt = 0|1 - default: 0 <br />
<br />
<br/><br />
<br />
==== log_hello ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11231:20/04/2016</span><br />
<br />
Display hello messages in debug log<br />
<br />
log_hello = 0|1 - default: 1 <br />
<br />
<br/><br />
<br />
==== ignore_peer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Ignore specific peer ID(s) totally. Login rejected.<br />
<br />
ignore_peer = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== block_ecm ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11290:19/12/2016</span><br />
<br />
Block ECM for specific peer ID(s).<br />
<br />
block_ecm = peer#1[[,peer#2]...[,peer#16]]<br />
<br />
<br/><br />
<br />
==== tmp_dir ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/2014</span><br />
<br />
gbox tempory directory<br />
<br />
tmp_dir = /path/to/dir <br />
<br />
default: /tmp/.oscam<br />
<br />
<br/><br />
<br />
==== gsms_disable ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9714:05/11/2014</span><br />
<br />
<br />
gsms_disable = 0|1<br />
<br />
0 - Gbox Short Message Service (GSMS) is enabled<br/><br />
1 - disable gbox short message service (GSMS)<br/><br />
<br />
default = 1<br />
<br />
<br/><br />
<br/><br />
<br />
==== gbox_save_gsms ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_save_gsms=0|1<br />
<br />
0 = don't save GSMS in configuration<br/><br />
1 = save all GSMS field in configuration<br />
<br />
You need to press save button to really save it!<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_type=0|1<br />
<br />
0 = normal text message<br/><br />
1 = normal text message + OSD (On Screen Display)<br />
<br/><br />
<br/><br />
<br />
==== gbox_dest_peers ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_dest_peers = [BOXID[,BOXID]...[,BOXID]]<br />
<br />
Maximum 16 * 2 bytes (4 hexa digits), comma-separated. For broadcast to all use FFFF.<br />
<br/><br />
<br/><br />
<br />
==== gbox_msg_txt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn11328:01/11/2017</span><br />
<br />
gbox_msg_txt=Your text to send to peers.<br />
<br />
From 6 to 127 alphanumerical characters.<br />
<br/><br />
<br/><br />
<br />
=== DVBapi ===<br />
{{Optional/en}}<br />
<br />
Section required only if OSCam will also be used as client!<br />
<br />
{{OSCamConfDVBapiParameter}}<br />
<br />
==== enabled ====<br />
{{Optional/en}}<br />
<br />
DVB API enabled<br />
<br />
Example:<br />
enabled = 0 # disabled (default)<br />
enabled = 1 # enabled<br />
<br />
==== user ====<br />
{{required}}<br />
user name for DVB API client<br />
Example:<br />
user = # user1<br />
<br />
Default:<br />
enabled = # anonymous<br />
<br />
==== au ====<br />
{{Optional/en}}<br />
<br />
AU mode for dvbapi:<br />
au = 0 # disable AU (default)<br />
au = 1 # enable AU<br />
<br />
==== pmt_mode ====<br />
{{Optional/en}}<br />
PMT mode:<br />
pmt_mode = 0 # use camd.socket and PMT file (default)<br />
pmt_mode = 1 # disable reading PMT file<br />
pmt_mode = 2 # disable camd.socket<br />
pmt_mode = 3 # read PMT file on startup only<br />
pmt_mode = 4 # do not use signal handler for monitoring /tmp<br />
pmt_mode = 5 # do not use signal handler to monitor /tmp & disable camd.socket<br />
pmt_mode = 6 # use PMT server mode <span style="background-color:Green;color:White;padding:0 5px;">NEU - NEW - NOUVEAU - NUOVO svn8680:05/06/2013</span><br />
<br />
==== request_mode ====<br />
{{Optional/en}}<br />
CAID request mode:<br />
0 = try all possible CAIDs one by one (default)<br />
1 = try all CAIDs simultaneously<br />
<br />
==== listen_port ====<br />
{{Optional/en}}<br />
<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9574:03/20/2014</span><br />
<br />
listen_port = 0|1<br />
<br />
TCP/IP port for SAT IP clients, filtering has to be done on client site<br />
<br />
0 = disabled (default)<br />
<br />
==== boxtype ====<br />
{{required}}<br />
set boxtype, auto detection of DVB API will be aspired:<br />
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt|qboxhd|coolstream|neumo|pc<br />
<br />
Default:<br />
boxtype = dreambox<br />
<br />
ipbox with camd.socket support, currently only with PGI image version 0.6 or above, verified on HD models only<br />
<br />
ipbox-pmt can be used on any DGS based images (with or without camd.socket support), verified on HD models only<br />
<br />
pc is for generic pc support (currently supported on VDR with vdr-plugin-dvbapi)<br />
<br />
==== cw_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
cw_delay = milli-seconds<br />
<br />
delay of CW writing, default = none<br />
<br />
==== delayer ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn6808:05/14/2012</span><br />
<br />
delayer = milli-seconds<br />
<br />
minimum time to write CW<br />
<br />
<br />
==== reopenonzap ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn4348:02/05/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn9072:12/08/2013</span><br />
<br />
reopenonzap = 0|1<br />
= 1 reopen demux devices in each channel switching,<br />
= 0 default<br />
<br />
==== decodeforever ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn7653:10/08/2012</span><br />
<br />
<span style="background-color:Red;color:White;padding:0 5px;">OBSOLETE svn8683:06/06/2013</span><br />
<br />
decodeforever = 0|1<br />
<br />
1 = trying to decode on all CAIDs<br />
0 = default<br />
<br />
==== ecminfo_type ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10722:06/13/15</span><br />
<br />
Define the type of ecm.info file to create, ecminfo_type = 0|1|2|3|4|5<br />
<br />
0 = default oscam syntax<br />
1 = default oscam syntax with ecmtime in ms instead of s<br />
2 = wicardd<br />
3 = mgcamd<br />
4 = cccam<br />
5 = camd3<br />
<br />
==== read_sdt ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10766:06/15/15</span><br />
<br />
If it is not yet available, this option automatically add entries in your oscam.srvid2 (or oscam.srvid) and in your oscam.provid files. You need to stay '''more than 30 seconds''' on a channel for the auto-detect to start. So both channel name and provider name are retrieved. If entries already exist they are not changed nor updated, so you keep full control on the content of both files, only missing entries are added.<br />
<br />
read_sdt = 0|1|2<br />
<br />
0 = disabled (default)<br />
1 = on, do not save FTA channels<br />
2 = on, save FTA channels<br />
<br />
==== write_sdt_prov ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn10841:06/27/15</span><br />
<br />
First enable the read_sdt parameter then you can specify if the provider name is saved or not into the oscam.srvid2 or oscam.srvid file. This is not mandatory since the provider name is now retrieved automatically from the oscam.provid file.<br />
<br />
write_sdt_prov = 0|1<br />
<br />
0 = off, do not write provider name into oscam.srvid/2 (default)<br />
1 = on, write provider name into oscam.srvid/2<br />
<br />
=== Anticasc ===<br />
Section is needed if anticascading will be used to protect against unauthorized forwarding CardSharing. <br />
{{OSCamConfAnticascParameter}}<br />
<br />
==== enabled ====<br />
{{required}}<br />
<br />
enabled anti-cascading:<br />
enabled = 1 # enabled<br />
= 0 # disabled (default)<br />
<br />
==== numusers ====<br />
{{Optional/en}}<br />
anti-cascading: user per account (number)<br />
numusers = 0 # anticascading disabled (default)<br />
= 1 # cascading for 1 user allowed ==> (1*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 11 ecms allowed per minute<br />
= 2 # cascading for 2 users allowed ==> (2*100+80)/(<span style="color:Blue;padding:0;5px"><B>10</B></span>*100/60) = 17 ecms allowed per minute <br><br />
<span style="color:Blue;padding:0;5px"><B>10</B></span> = number you have put in oscam.ac. Default value is 10<br />
<br />
==== sampletime ====<br />
{{Optional/en}}<br />
duration of sample in minutes:<br />
sampletime = 5 # duration 5 minutes<br />
= # [blank] duration 2 minutes (default)<br />
<br />
Ex: numusers = 1 ==> 11 ecms * 5 minutes ==> 55 ecms allowed in 5 minutes <br />
numusers = 2 ==> 17 ecms * 5 minutes ==> 85 ecms allowed in 5 minutes<br />
<br />
==== samples ====<br />
{{Optional/en}}<br />
<br />
number of additionnal ecms allowed (possible values between 2 and 10)<br />
samples = 7 # 7 additional ecms allowed<br />
= # [blank] 10 additional ecms allowed (default)<br />
<br />
==== penalty ====<br />
{{Optional/en}}<br />
Level of the penalty if the user exceeds the result shown in Ex on Sampletime<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay ([[OSCam/en/Config/oscam.conf#fakedelay|fakedelay]])<br />
<br />
penalty can be overwritten per user in oscam.user<br />
<br />
==== aclogfile ====<br />
{{Optional/en}}<br />
file for anti-cascading logging<br />
aclogfile =<br />
= # [blank] no logfile (default)<br />
<br />
==== fakedelay ====<br />
{{Optional/en}}<br />
<br />
fake delay time in milli seconds (possible values between 100 and 3000)<br />
fakedelay = 500 # delay 500 milli seconds<br />
= # [blank] 1000 milli seconds (default)<br />
<br />
==== denysamples ====<br />
{{Optional/en}}<br />
<br />
How many samples should be penalized?<br />
denysamples = 10 # 10 samples will be penalized<br />
= # [blank] 8 Samples will penalized (default)<br />
<br/><br />
<br />
==== acosc_enabled ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br/><br />
acosc_enabled = 0|1<br />
1 = enable anticascading oder SIDs count<br />
0 = default<br />
<br/><br />
==== acosc_max_active_sids ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_max_active_sids = count<br />
<br />
maximum activ SIDs with anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br />
<br/><br />
<br />
==== acosc_zap_limit ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_zap_limit = count<br />
<br />
zap limit for anticascading over SIDs count<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty = 0|1|2|3<br />
<br />
level of penalty with anticascading over SIDs count:<br />
<br />
0 = only logging (default)<br />
1 = send fake DWs<br />
2 = ban user temporary<br />
3 = send real DWs with delay<br />
can be overwritten per user in oscam.user<br />
<br/><br />
<br />
==== acosc_penalty_duration ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_penalty_duration = seconds<br />
<br />
penalty duration for anticascading over SIDs count:<br />
<br />
0 = unlimited (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
==== acosc_delay ====<br />
{{Optional/en}}<br />
<span style="background-color:Green;color:White;padding:0 5px;">NEW svn9761:06/05/14</span><br />
<br />
acosc_delay = milliseconds<br />
<br />
delay for anticascading over SIDs count<br />
<br />
0 = unlimites (default)<br />
can be overwritten per user in oscam.user <br />
<br/><br />
<br />
<br />
<br />
<br />
<br />
<br />
{{OSCamTranslatedLinks}}</div>
Felixka